| /* |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| * Copyright (C) 2024 IBM Corp. |
| * |
| * IBM Common FRU Access Macro |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/units.h" |
| |
| #include "qapi/error.h" |
| #include "trace.h" |
| |
| #include "hw/fsi/cfam.h" |
| #include "hw/fsi/fsi.h" |
| |
| #include "hw/qdev-properties.h" |
| |
| #define ENGINE_CONFIG_NEXT BIT(31) |
| #define ENGINE_CONFIG_TYPE_PEEK (0x02 << 4) |
| #define ENGINE_CONFIG_TYPE_FSI (0x03 << 4) |
| #define ENGINE_CONFIG_TYPE_SCRATCHPAD (0x06 << 4) |
| |
| /* Valid, slots, version, type, crc */ |
| #define CFAM_CONFIG_REG(__VER, __TYPE, __CRC) \ |
| (ENGINE_CONFIG_NEXT | \ |
| 0x00010000 | \ |
| (__VER) | \ |
| (__TYPE) | \ |
| (__CRC)) |
| |
| #define TO_REG(x) ((x) >> 2) |
| |
| #define CFAM_CONFIG_CHIP_ID TO_REG(0x00) |
| #define CFAM_CONFIG_PEEK_STATUS TO_REG(0x04) |
| #define CFAM_CONFIG_CHIP_ID_P9 0xc0022d15 |
| #define CFAM_CONFIG_CHIP_ID_BREAK 0xc0de0000 |
| |
| static uint64_t fsi_cfam_config_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| trace_fsi_cfam_config_read(addr, size); |
| |
| switch (addr) { |
| case 0x00: |
| return CFAM_CONFIG_CHIP_ID_P9; |
| case 0x04: |
| return CFAM_CONFIG_REG(0x1000, ENGINE_CONFIG_TYPE_PEEK, 0xc); |
| case 0x08: |
| return CFAM_CONFIG_REG(0x5000, ENGINE_CONFIG_TYPE_FSI, 0xa); |
| case 0xc: |
| return CFAM_CONFIG_REG(0x1000, ENGINE_CONFIG_TYPE_SCRATCHPAD, 0x7); |
| default: |
| /* |
| * The config table contains different engines from 0xc onwards. |
| * The scratch pad is already added at address 0xc. We need to add |
| * future engines from address 0x10 onwards. Returning 0 as engine |
| * is not implemented. |
| */ |
| return 0; |
| } |
| } |
| |
| static void fsi_cfam_config_write(void *opaque, hwaddr addr, uint64_t data, |
| unsigned size) |
| { |
| FSICFAMState *cfam = FSI_CFAM(opaque); |
| |
| trace_fsi_cfam_config_write(addr, size, data); |
| |
| switch (TO_REG(addr)) { |
| case CFAM_CONFIG_CHIP_ID: |
| case CFAM_CONFIG_PEEK_STATUS: |
| if (data == CFAM_CONFIG_CHIP_ID_BREAK) { |
| bus_cold_reset(BUS(&cfam->lbus)); |
| } |
| break; |
| default: |
| trace_fsi_cfam_config_write_noaddr(addr, size, data); |
| } |
| } |
| |
| static const struct MemoryRegionOps cfam_config_ops = { |
| .read = fsi_cfam_config_read, |
| .write = fsi_cfam_config_write, |
| .valid.max_access_size = 4, |
| .valid.min_access_size = 4, |
| .impl.max_access_size = 4, |
| .impl.min_access_size = 4, |
| .endianness = DEVICE_BIG_ENDIAN, |
| }; |
| |
| static uint64_t fsi_cfam_unimplemented_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| trace_fsi_cfam_unimplemented_read(addr, size); |
| |
| return 0; |
| } |
| |
| static void fsi_cfam_unimplemented_write(void *opaque, hwaddr addr, |
| uint64_t data, unsigned size) |
| { |
| trace_fsi_cfam_unimplemented_write(addr, size, data); |
| } |
| |
| static const struct MemoryRegionOps fsi_cfam_unimplemented_ops = { |
| .read = fsi_cfam_unimplemented_read, |
| .write = fsi_cfam_unimplemented_write, |
| .endianness = DEVICE_BIG_ENDIAN, |
| }; |
| |
| static void fsi_cfam_instance_init(Object *obj) |
| { |
| FSICFAMState *s = FSI_CFAM(obj); |
| |
| object_initialize_child(obj, "scratchpad", &s->scratchpad, |
| TYPE_FSI_SCRATCHPAD); |
| } |
| |
| static void fsi_cfam_realize(DeviceState *dev, Error **errp) |
| { |
| FSICFAMState *cfam = FSI_CFAM(dev); |
| FSISlaveState *slave = FSI_SLAVE(dev); |
| |
| /* Each slave has a 2MiB address space */ |
| memory_region_init_io(&cfam->mr, OBJECT(cfam), &fsi_cfam_unimplemented_ops, |
| cfam, TYPE_FSI_CFAM, 2 * MiB); |
| |
| qbus_init(&cfam->lbus, sizeof(cfam->lbus), TYPE_FSI_LBUS, DEVICE(cfam), |
| NULL); |
| |
| memory_region_init_io(&cfam->config_iomem, OBJECT(cfam), &cfam_config_ops, |
| cfam, TYPE_FSI_CFAM ".config", 0x400); |
| |
| memory_region_add_subregion(&cfam->mr, 0, &cfam->config_iomem); |
| memory_region_add_subregion(&cfam->mr, 0x800, &slave->iomem); |
| memory_region_add_subregion(&cfam->mr, 0xc00, &cfam->lbus.mr); |
| |
| /* Add scratchpad engine */ |
| if (!qdev_realize(DEVICE(&cfam->scratchpad), BUS(&cfam->lbus), errp)) { |
| return; |
| } |
| |
| FSILBusDevice *fsi_dev = FSI_LBUS_DEVICE(&cfam->scratchpad); |
| memory_region_add_subregion(&cfam->lbus.mr, 0, &fsi_dev->iomem); |
| } |
| |
| static void fsi_cfam_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| dc->bus_type = TYPE_FSI_BUS; |
| dc->realize = fsi_cfam_realize; |
| } |
| |
| static const TypeInfo fsi_cfam_info = { |
| .name = TYPE_FSI_CFAM, |
| .parent = TYPE_FSI_SLAVE, |
| .instance_init = fsi_cfam_instance_init, |
| .instance_size = sizeof(FSICFAMState), |
| .class_init = fsi_cfam_class_init, |
| }; |
| |
| static void fsi_cfam_register_types(void) |
| { |
| type_register_static(&fsi_cfam_info); |
| } |
| |
| type_init(fsi_cfam_register_types); |