hw/arm/aspeed.c - qemu - Git at Google

 /*
  * OpenPOWER Palmetto BMC
  *
  * Andrew Jeffery <andrew@aj.id.au>
  *
  * Copyright 2016 IBM Corp.
  *
  * This code is licensed under the GPL version 2 or later.  See
  * the COPYING file in the top-level directory.
  */

 #include "qemu/osdep.h"
 #include "qapi/error.h"
 #include "qemu-common.h"
 #include "cpu.h"
 #include "exec/address-spaces.h"
 #include "hw/arm/arm.h"
 #include "hw/arm/aspeed.h"
 #include "hw/arm/aspeed_soc.h"
 #include "hw/boards.h"
 #include "hw/i2c/smbus.h"
 #include "qemu/log.h"
 #include "sysemu/block-backend.h"
 #include "hw/loader.h"
 #include "qemu/error-report.h"

 static struct arm_boot_info aspeed_board_binfo = {
     .board_id = -1, /* device-tree-only board */
     .nb_cpus = 1,
 };

 typedef struct AspeedBoardState {
     AspeedSoCState soc;
     MemoryRegion ram;
     MemoryRegion max_ram;
 } AspeedBoardState;

 /* Palmetto hardware value: 0x120CE416 */
 #define PALMETTO_BMC_HW_STRAP1 (                                        \
         SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_256MB) |               \
         SCU_AST2400_HW_STRAP_DRAM_CONFIG(2 /* DDR3 with CL=6, CWL=5 */) | \
         SCU_AST2400_HW_STRAP_ACPI_DIS |                                 \
         SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) |       \
         SCU_HW_STRAP_VGA_CLASS_CODE |                                   \
         SCU_HW_STRAP_LPC_RESET_PIN |                                    \
         SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) |                \
         SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \
         SCU_HW_STRAP_SPI_WIDTH |                                        \
         SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) |                       \
         SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT))

 /* AST2500 evb hardware value: 0xF100C2E6 */
 #define AST2500_EVB_HW_STRAP1 ((                                        \
         AST2500_HW_STRAP1_DEFAULTS |                                    \
         SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE |                     \
         SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE |                        \
         SCU_AST2500_HW_STRAP_UART_DEBUG |                               \
         SCU_AST2500_HW_STRAP_DDR4_ENABLE |                              \
         SCU_HW_STRAP_MAC1_RGMII |                                       \
         SCU_HW_STRAP_MAC0_RGMII) &                                      \
         ~SCU_HW_STRAP_2ND_BOOT_WDT)

 /* Romulus hardware value: 0xF10AD206 */
 #define ROMULUS_BMC_HW_STRAP1 (                                         \
         AST2500_HW_STRAP1_DEFAULTS |                                    \
         SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE |                     \
         SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE |                        \
         SCU_AST2500_HW_STRAP_UART_DEBUG |                               \
         SCU_AST2500_HW_STRAP_DDR4_ENABLE |                              \
         SCU_AST2500_HW_STRAP_ACPI_ENABLE |                              \
         SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))

 /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
 #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1

 /*
  * The max ram region is for firmwares that scan the address space
  * with load/store to guess how much RAM the SoC has.
  */
 static uint64_t max_ram_read(void *opaque, hwaddr offset, unsigned size)
 {
     return 0;
 }

 static void max_ram_write(void *opaque, hwaddr offset, uint64_t value,
                            unsigned size)
 {
     /* Discard writes */
 }

 static const MemoryRegionOps max_ram_ops = {
     .read = max_ram_read,
     .write = max_ram_write,
     .endianness = DEVICE_NATIVE_ENDIAN,
 };

 #define FIRMWARE_ADDR 0x0

 static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size,
                            Error **errp)
 {
     BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
     uint8_t *storage;
     int64_t size;

     /* The block backend size should have already been 'validated' by
      * the creation of the m25p80 object.
      */
     size = blk_getlength(blk);
     if (size <= 0) {
         error_setg(errp, "failed to get flash size");
         return;
     }

     if (rom_size > size) {
         rom_size = size;
     }

     storage = g_new0(uint8_t, rom_size);
     if (blk_pread(blk, 0, storage, rom_size) < 0) {
         error_setg(errp, "failed to read the initial flash content");
         return;
     }

     rom_add_blob_fixed("aspeed.boot_rom", storage, rom_size, addr);
     g_free(storage);
 }

 static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype,
                                       Error **errp)
 {
     int i ;

     for (i = 0; i < s->num_cs; ++i) {
         AspeedSMCFlash *fl = &s->flashes[i];
         DriveInfo *dinfo = drive_get_next(IF_MTD);
         qemu_irq cs_line;

         fl->flash = ssi_create_slave_no_init(s->spi, flashtype);
         if (dinfo) {
             qdev_prop_set_drive(fl->flash, "drive", blk_by_legacy_dinfo(dinfo),
                                 errp);
         }
         qdev_init_nofail(fl->flash);

         cs_line = qdev_get_gpio_in_named(fl->flash, SSI_GPIO_CS, 0);
         sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line);
     }
 }

 static void aspeed_board_init(MachineState *machine,
                               const AspeedBoardConfig *cfg)
 {
     AspeedBoardState *bmc;
     AspeedSoCClass *sc;
     DriveInfo *drive0 = drive_get(IF_MTD, 0, 0);
     ram_addr_t max_ram_size;

     bmc = g_new0(AspeedBoardState, 1);
     object_initialize(&bmc->soc, (sizeof(bmc->soc)), cfg->soc_name);
     object_property_add_child(OBJECT(machine), "soc", OBJECT(&bmc->soc),
                               &error_abort);

     sc = ASPEED_SOC_GET_CLASS(&bmc->soc);

     object_property_set_uint(OBJECT(&bmc->soc), ram_size, "ram-size",
                              &error_abort);
     object_property_set_int(OBJECT(&bmc->soc), cfg->hw_strap1, "hw-strap1",
                             &error_abort);
     object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs",
                             &error_abort);
     if (machine->kernel_filename) {
         /*
          * When booting with a -kernel command line there is no u-boot
          * that runs to unlock the SCU. In this case set the default to
          * be unlocked as the kernel expects
          */
         object_property_set_int(OBJECT(&bmc->soc), ASPEED_SCU_PROT_KEY,
                                 "hw-prot-key", &error_abort);
     }
     object_property_set_bool(OBJECT(&bmc->soc), true, "realized",
                              &error_abort);

     /*
      * Allocate RAM after the memory controller has checked the size
      * was valid. If not, a default value is used.
      */
     ram_size = object_property_get_uint(OBJECT(&bmc->soc), "ram-size",
                                         &error_abort);

     memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size);
     memory_region_add_subregion(get_system_memory(), sc->info->sdram_base,
                                 &bmc->ram);
     object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram),
                                    &error_abort);

     max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size",
                                             &error_abort);
     memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL,
                           "max_ram", max_ram_size  - ram_size);
     memory_region_add_subregion(get_system_memory(),
                                 sc->info->sdram_base + ram_size,
                                 &bmc->max_ram);

     aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort);
     aspeed_board_init_flashes(&bmc->soc.spi[0], cfg->spi_model, &error_abort);

     /* Install first FMC flash content as a boot rom. */
     if (drive0) {
         AspeedSMCFlash *fl = &bmc->soc.fmc.flashes[0];
         MemoryRegion *boot_rom = g_new(MemoryRegion, 1);

         /*
          * create a ROM region using the default mapping window size of
          * the flash module. The window size is 64MB for the AST2400
          * SoC and 128MB for the AST2500 SoC, which is twice as big as
          * needed by the flash modules of the Aspeed machines.
          */
         memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom",
                                fl->size, &error_abort);
         memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR,
                                     boot_rom);
         write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort);
     }

     aspeed_board_binfo.kernel_filename = machine->kernel_filename;
     aspeed_board_binfo.initrd_filename = machine->initrd_filename;
     aspeed_board_binfo.kernel_cmdline = machine->kernel_cmdline;
     aspeed_board_binfo.ram_size = ram_size;
     aspeed_board_binfo.loader_start = sc->info->sdram_base;

     if (cfg->i2c_init) {
         cfg->i2c_init(bmc);
     }

     arm_load_kernel(ARM_CPU(first_cpu), &aspeed_board_binfo);
 }

 static void palmetto_bmc_i2c_init(AspeedBoardState *bmc)
 {
     AspeedSoCState *soc = &bmc->soc;
     DeviceState *dev;
     uint8_t *eeprom_buf = g_malloc0(32 * 1024);

     /* The palmetto platform expects a ds3231 RTC but a ds1338 is
      * enough to provide basic RTC features. Alarms will be missing */
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68);

     smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), 0x50,
                           eeprom_buf);

     /* add a TMP423 temperature sensor */
     dev = i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2),
                            "tmp423", 0x4c);
     object_property_set_int(OBJECT(dev), 31000, "temperature0", &error_abort);
     object_property_set_int(OBJECT(dev), 28000, "temperature1", &error_abort);
     object_property_set_int(OBJECT(dev), 20000, "temperature2", &error_abort);
     object_property_set_int(OBJECT(dev), 110000, "temperature3", &error_abort);
 }

 static void ast2500_evb_i2c_init(AspeedBoardState *bmc)
 {
     AspeedSoCState *soc = &bmc->soc;
     uint8_t *eeprom_buf = g_malloc0(8 * 1024);

     smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), 0x50,
                           eeprom_buf);

     /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d);

     /* The AST2500 EVB does not have an RTC. Let's pretend that one is
      * plugged on the I2C bus header */
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
 }

 static void romulus_bmc_i2c_init(AspeedBoardState *bmc)
 {
     AspeedSoCState *soc = &bmc->soc;

     /* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is
      * good enough */
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
 }

 static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
 {
     AspeedSoCState *soc = &bmc->soc;
     uint8_t *eeprom_buf = g_malloc0(8 * 1024);

     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60);

     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c);
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c);

     /* The Witherspoon expects a TMP275 but a TMP105 is compatible */
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a);

     /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is
      * good enough */
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);

     smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51,
                           eeprom_buf);
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552",
                      0x60);
 }

 static void aspeed_machine_init(MachineState *machine)
 {
     AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine);

     aspeed_board_init(machine, amc->board);
 }

 static void aspeed_machine_class_init(ObjectClass *oc, void *data)
 {
     MachineClass *mc = MACHINE_CLASS(oc);
     AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
     const AspeedBoardConfig *board = data;

     mc->desc = board->desc;
     mc->init = aspeed_machine_init;
     mc->max_cpus = 1;
     mc->no_sdcard = 1;
     mc->no_floppy = 1;
     mc->no_cdrom = 1;
     mc->no_parallel = 1;
     amc->board = board;
 }

 static const TypeInfo aspeed_machine_type = {
     .name = TYPE_ASPEED_MACHINE,
     .parent = TYPE_MACHINE,
     .instance_size = sizeof(AspeedMachine),
     .class_size = sizeof(AspeedMachineClass),
     .abstract = true,
 };

 static const AspeedBoardConfig aspeed_boards[] = {
     {
         .name      = MACHINE_TYPE_NAME("palmetto-bmc"),
         .desc      = "OpenPOWER Palmetto BMC (ARM926EJ-S)",
         .soc_name  = "ast2400-a1",
         .hw_strap1 = PALMETTO_BMC_HW_STRAP1,
         .fmc_model = "n25q256a",
         .spi_model = "mx25l25635e",
         .num_cs    = 1,
         .i2c_init  = palmetto_bmc_i2c_init,
     }, {
         .name      = MACHINE_TYPE_NAME("ast2500-evb"),
         .desc      = "Aspeed AST2500 EVB (ARM1176)",
         .soc_name  = "ast2500-a1",
         .hw_strap1 = AST2500_EVB_HW_STRAP1,
         .fmc_model = "w25q256",
         .spi_model = "mx25l25635e",
         .num_cs    = 1,
         .i2c_init  = ast2500_evb_i2c_init,
     }, {
         .name      = MACHINE_TYPE_NAME("romulus-bmc"),
         .desc      = "OpenPOWER Romulus BMC (ARM1176)",
         .soc_name  = "ast2500-a1",
         .hw_strap1 = ROMULUS_BMC_HW_STRAP1,
         .fmc_model = "n25q256a",
         .spi_model = "mx66l1g45g",
         .num_cs    = 2,
         .i2c_init  = romulus_bmc_i2c_init,
     }, {
         .name      = MACHINE_TYPE_NAME("witherspoon-bmc"),
         .desc      = "OpenPOWER Witherspoon BMC (ARM1176)",
         .soc_name  = "ast2500-a1",
         .hw_strap1 = WITHERSPOON_BMC_HW_STRAP1,
         .fmc_model = "mx25l25635e",
         .spi_model = "mx66l1g45g",
         .num_cs    = 2,
         .i2c_init  = witherspoon_bmc_i2c_init,
     },
 };

 static void aspeed_machine_types(void)
 {
     int i;

     type_register_static(&aspeed_machine_type);
     for (i = 0; i < ARRAY_SIZE(aspeed_boards); ++i) {
         TypeInfo ti = {
             .name       = aspeed_boards[i].name,
             .parent     = TYPE_ASPEED_MACHINE,
             .class_init = aspeed_machine_class_init,
             .class_data = (void *)&aspeed_boards[i],
         };
         type_register(&ti);
     }
 }

 type_init(aspeed_machine_types)
	/*
	* OpenPOWER Palmetto BMC
	*
	* Andrew Jeffery <andrew@aj.id.au>
	*
	* Copyright 2016 IBM Corp.
	*
	* This code is licensed under the GPL version 2 or later. See
	* the COPYING file in the top-level directory.
	*/

	#include "qemu/osdep.h"
	#include "qapi/error.h"
	#include "qemu-common.h"
	#include "cpu.h"
	#include "exec/address-spaces.h"
	#include "hw/arm/arm.h"
	#include "hw/arm/aspeed.h"
	#include "hw/arm/aspeed_soc.h"
	#include "hw/boards.h"
	#include "hw/i2c/smbus.h"
	#include "qemu/log.h"
	#include "sysemu/block-backend.h"
	#include "hw/loader.h"
	#include "qemu/error-report.h"

	static struct arm_boot_info aspeed_board_binfo = {
	.board_id = -1, /* device-tree-only board */
	.nb_cpus = 1,
	};

	typedef struct AspeedBoardState {
	AspeedSoCState soc;
	MemoryRegion ram;
	MemoryRegion max_ram;
	} AspeedBoardState;

	/* Palmetto hardware value: 0x120CE416 */
	#define PALMETTO_BMC_HW_STRAP1 ( \
	SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_256MB) \| \
	SCU_AST2400_HW_STRAP_DRAM_CONFIG(2 /* DDR3 with CL=6, CWL=5 */) \| \
	SCU_AST2400_HW_STRAP_ACPI_DIS \| \
	SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) \| \
	SCU_HW_STRAP_VGA_CLASS_CODE \| \
	SCU_HW_STRAP_LPC_RESET_PIN \| \
	SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) \| \
	SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) \| \
	SCU_HW_STRAP_SPI_WIDTH \| \
	SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) \| \
	SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT))

	/* AST2500 evb hardware value: 0xF100C2E6 */
	#define AST2500_EVB_HW_STRAP1 (( \
	AST2500_HW_STRAP1_DEFAULTS \| \
	SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE \| \
	SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE \| \
	SCU_AST2500_HW_STRAP_UART_DEBUG \| \
	SCU_AST2500_HW_STRAP_DDR4_ENABLE \| \
	SCU_HW_STRAP_MAC1_RGMII \| \
	SCU_HW_STRAP_MAC0_RGMII) & \
	~SCU_HW_STRAP_2ND_BOOT_WDT)

	/* Romulus hardware value: 0xF10AD206 */
	#define ROMULUS_BMC_HW_STRAP1 ( \
	AST2500_HW_STRAP1_DEFAULTS \| \
	SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE \| \
	SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE \| \
	SCU_AST2500_HW_STRAP_UART_DEBUG \| \
	SCU_AST2500_HW_STRAP_DDR4_ENABLE \| \
	SCU_AST2500_HW_STRAP_ACPI_ENABLE \| \
	SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))

	/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
	#define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1

	/*
	* The max ram region is for firmwares that scan the address space
	* with load/store to guess how much RAM the SoC has.
	*/
	static uint64_t max_ram_read(void *opaque, hwaddr offset, unsigned size)
	{
	return 0;
	}

	static void max_ram_write(void *opaque, hwaddr offset, uint64_t value,
	unsigned size)
	{
	/* Discard writes */
	}

	static const MemoryRegionOps max_ram_ops = {
	.read = max_ram_read,
	.write = max_ram_write,
	.endianness = DEVICE_NATIVE_ENDIAN,
	};

	#define FIRMWARE_ADDR 0x0

	static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size,
	Error **errp)
	{
	BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
	uint8_t *storage;
	int64_t size;

	/* The block backend size should have already been 'validated' by
	* the creation of the m25p80 object.
	*/
	size = blk_getlength(blk);
	if (size <= 0) {
	error_setg(errp, "failed to get flash size");
	return;
	}

	if (rom_size > size) {
	rom_size = size;
	}

	storage = g_new0(uint8_t, rom_size);
	if (blk_pread(blk, 0, storage, rom_size) < 0) {
	error_setg(errp, "failed to read the initial flash content");
	return;
	}

	rom_add_blob_fixed("aspeed.boot_rom", storage, rom_size, addr);
	g_free(storage);
	}

	static void aspeed_board_init_flashes(AspeedSMCState s, const char flashtype,
	Error **errp)
	{
	int i ;

	for (i = 0; i < s->num_cs; ++i) {
	AspeedSMCFlash *fl = &s->flashes[i];
	DriveInfo *dinfo = drive_get_next(IF_MTD);
	qemu_irq cs_line;

	fl->flash = ssi_create_slave_no_init(s->spi, flashtype);
	if (dinfo) {
	qdev_prop_set_drive(fl->flash, "drive", blk_by_legacy_dinfo(dinfo),
	errp);
	}
	qdev_init_nofail(fl->flash);

	cs_line = qdev_get_gpio_in_named(fl->flash, SSI_GPIO_CS, 0);
	sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line);
	}
	}

	static void aspeed_board_init(MachineState *machine,
	const AspeedBoardConfig *cfg)
	{
	AspeedBoardState *bmc;
	AspeedSoCClass *sc;
	DriveInfo *drive0 = drive_get(IF_MTD, 0, 0);
	ram_addr_t max_ram_size;

	bmc = g_new0(AspeedBoardState, 1);
	object_initialize(&bmc->soc, (sizeof(bmc->soc)), cfg->soc_name);
	object_property_add_child(OBJECT(machine), "soc", OBJECT(&bmc->soc),
	&error_abort);

	sc = ASPEED_SOC_GET_CLASS(&bmc->soc);

	object_property_set_uint(OBJECT(&bmc->soc), ram_size, "ram-size",
	&error_abort);
	object_property_set_int(OBJECT(&bmc->soc), cfg->hw_strap1, "hw-strap1",
	&error_abort);
	object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs",
	&error_abort);
	if (machine->kernel_filename) {
	/*
	* When booting with a -kernel command line there is no u-boot
	* that runs to unlock the SCU. In this case set the default to
	* be unlocked as the kernel expects
	*/
	object_property_set_int(OBJECT(&bmc->soc), ASPEED_SCU_PROT_KEY,
	"hw-prot-key", &error_abort);
	}
	object_property_set_bool(OBJECT(&bmc->soc), true, "realized",
	&error_abort);

	/*
	* Allocate RAM after the memory controller has checked the size
	* was valid. If not, a default value is used.
	*/
	ram_size = object_property_get_uint(OBJECT(&bmc->soc), "ram-size",
	&error_abort);

	memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size);
	memory_region_add_subregion(get_system_memory(), sc->info->sdram_base,
	&bmc->ram);
	object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram),
	&error_abort);

	max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size",
	&error_abort);
	memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL,
	"max_ram", max_ram_size - ram_size);
	memory_region_add_subregion(get_system_memory(),
	sc->info->sdram_base + ram_size,
	&bmc->max_ram);

	aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort);
	aspeed_board_init_flashes(&bmc->soc.spi[0], cfg->spi_model, &error_abort);

	/* Install first FMC flash content as a boot rom. */
	if (drive0) {
	AspeedSMCFlash *fl = &bmc->soc.fmc.flashes[0];
	MemoryRegion *boot_rom = g_new(MemoryRegion, 1);

	/*
	* create a ROM region using the default mapping window size of
	* the flash module. The window size is 64MB for the AST2400
	* SoC and 128MB for the AST2500 SoC, which is twice as big as
	* needed by the flash modules of the Aspeed machines.
	*/
	memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom",
	fl->size, &error_abort);
	memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR,
	boot_rom);
	write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort);
	}

	aspeed_board_binfo.kernel_filename = machine->kernel_filename;
	aspeed_board_binfo.initrd_filename = machine->initrd_filename;
	aspeed_board_binfo.kernel_cmdline = machine->kernel_cmdline;
	aspeed_board_binfo.ram_size = ram_size;
	aspeed_board_binfo.loader_start = sc->info->sdram_base;

	if (cfg->i2c_init) {
	cfg->i2c_init(bmc);
	}

	arm_load_kernel(ARM_CPU(first_cpu), &aspeed_board_binfo);
	}

	static void palmetto_bmc_i2c_init(AspeedBoardState *bmc)
	{
	AspeedSoCState *soc = &bmc->soc;
	DeviceState *dev;
	uint8_t eeprom_buf = g_malloc0(32 1024);

	/* The palmetto platform expects a ds3231 RTC but a ds1338 is
	* enough to provide basic RTC features. Alarms will be missing */
	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68);

	smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), 0x50,
	eeprom_buf);

	/* add a TMP423 temperature sensor */
	dev = i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2),
	"tmp423", 0x4c);
	object_property_set_int(OBJECT(dev), 31000, "temperature0", &error_abort);
	object_property_set_int(OBJECT(dev), 28000, "temperature1", &error_abort);
	object_property_set_int(OBJECT(dev), 20000, "temperature2", &error_abort);
	object_property_set_int(OBJECT(dev), 110000, "temperature3", &error_abort);
	}

	static void ast2500_evb_i2c_init(AspeedBoardState *bmc)
	{
	AspeedSoCState *soc = &bmc->soc;
	uint8_t eeprom_buf = g_malloc0(8 1024);

	smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), 0x50,
	eeprom_buf);

	/* The AST2500 EVB expects a LM75 but a TMP105 is compatible */
	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x4d);

	/* The AST2500 EVB does not have an RTC. Let's pretend that one is
	* plugged on the I2C bus header */
	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
	}

	static void romulus_bmc_i2c_init(AspeedBoardState *bmc)
	{
	AspeedSoCState *soc = &bmc->soc;

	/* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is
	* good enough */
	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
	}

	static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
	{
	AspeedSoCState *soc = &bmc->soc;
	uint8_t eeprom_buf = g_malloc0(8 1024);

	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60);

	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c);
	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c);

	/* The Witherspoon expects a TMP275 but a TMP105 is compatible */
	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 0x4a);

	/* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is
	* good enough */
	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);

	smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51,
	eeprom_buf);
	i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "pca9552",
	0x60);
	}

	static void aspeed_machine_init(MachineState *machine)
	{
	AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine);

	aspeed_board_init(machine, amc->board);
	}

	static void aspeed_machine_class_init(ObjectClass oc, void data)
	{
	MachineClass *mc = MACHINE_CLASS(oc);
	AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
	const AspeedBoardConfig *board = data;

	mc->desc = board->desc;
	mc->init = aspeed_machine_init;
	mc->max_cpus = 1;
	mc->no_sdcard = 1;
	mc->no_floppy = 1;
	mc->no_cdrom = 1;
	mc->no_parallel = 1;
	amc->board = board;
	}

	static const TypeInfo aspeed_machine_type = {
	.name = TYPE_ASPEED_MACHINE,
	.parent = TYPE_MACHINE,
	.instance_size = sizeof(AspeedMachine),
	.class_size = sizeof(AspeedMachineClass),
	.abstract = true,
	};

	static const AspeedBoardConfig aspeed_boards[] = {
	{
	.name = MACHINE_TYPE_NAME("palmetto-bmc"),
	.desc = "OpenPOWER Palmetto BMC (ARM926EJ-S)",
	.soc_name = "ast2400-a1",
	.hw_strap1 = PALMETTO_BMC_HW_STRAP1,
	.fmc_model = "n25q256a",
	.spi_model = "mx25l25635e",
	.num_cs = 1,
	.i2c_init = palmetto_bmc_i2c_init,
	}, {
	.name = MACHINE_TYPE_NAME("ast2500-evb"),
	.desc = "Aspeed AST2500 EVB (ARM1176)",
	.soc_name = "ast2500-a1",
	.hw_strap1 = AST2500_EVB_HW_STRAP1,
	.fmc_model = "w25q256",
	.spi_model = "mx25l25635e",
	.num_cs = 1,
	.i2c_init = ast2500_evb_i2c_init,
	}, {
	.name = MACHINE_TYPE_NAME("romulus-bmc"),
	.desc = "OpenPOWER Romulus BMC (ARM1176)",
	.soc_name = "ast2500-a1",
	.hw_strap1 = ROMULUS_BMC_HW_STRAP1,
	.fmc_model = "n25q256a",
	.spi_model = "mx66l1g45g",
	.num_cs = 2,
	.i2c_init = romulus_bmc_i2c_init,
	}, {
	.name = MACHINE_TYPE_NAME("witherspoon-bmc"),
	.desc = "OpenPOWER Witherspoon BMC (ARM1176)",
	.soc_name = "ast2500-a1",
	.hw_strap1 = WITHERSPOON_BMC_HW_STRAP1,
	.fmc_model = "mx25l25635e",
	.spi_model = "mx66l1g45g",
	.num_cs = 2,
	.i2c_init = witherspoon_bmc_i2c_init,
	},
	};

	static void aspeed_machine_types(void)
	{
	int i;

	type_register_static(&aspeed_machine_type);
	for (i = 0; i < ARRAY_SIZE(aspeed_boards); ++i) {
	TypeInfo ti = {
	.name = aspeed_boards[i].name,
	.parent = TYPE_ASPEED_MACHINE,
	.class_init = aspeed_machine_class_init,
	.class_data = (void *)&aspeed_boards[i],
	};
	type_register(&ti);
	}
	}

	type_init(aspeed_machine_types)