| /* |
| * QEMU RISC-V VirtIO Board |
| * |
| * Copyright (c) 2017 SiFive, Inc. |
| * |
| * RISC-V machine with 16550a UART and VirtIO MMIO |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2 or later, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/units.h" |
| #include "qemu/error-report.h" |
| #include "qemu/guest-random.h" |
| #include "qapi/error.h" |
| #include "hw/boards.h" |
| #include "hw/loader.h" |
| #include "hw/sysbus.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/char/serial.h" |
| #include "target/riscv/cpu.h" |
| #include "hw/core/sysbus-fdt.h" |
| #include "target/riscv/pmu.h" |
| #include "hw/riscv/riscv_hart.h" |
| #include "hw/riscv/virt.h" |
| #include "hw/riscv/boot.h" |
| #include "hw/riscv/numa.h" |
| #include "kvm/kvm_riscv.h" |
| #include "hw/firmware/smbios.h" |
| #include "hw/intc/riscv_aclint.h" |
| #include "hw/intc/riscv_aplic.h" |
| #include "hw/intc/sifive_plic.h" |
| #include "hw/misc/sifive_test.h" |
| #include "hw/platform-bus.h" |
| #include "chardev/char.h" |
| #include "sysemu/device_tree.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/tcg.h" |
| #include "sysemu/kvm.h" |
| #include "sysemu/tpm.h" |
| #include "sysemu/qtest.h" |
| #include "hw/pci/pci.h" |
| #include "hw/pci-host/gpex.h" |
| #include "hw/display/ramfb.h" |
| #include "hw/acpi/aml-build.h" |
| #include "qapi/qapi-visit-common.h" |
| #include "hw/virtio/virtio-iommu.h" |
| |
| /* KVM AIA only supports APLIC MSI. APLIC Wired is always emulated by QEMU. */ |
| static bool virt_use_kvm_aia(RISCVVirtState *s) |
| { |
| return kvm_irqchip_in_kernel() && s->aia_type == VIRT_AIA_TYPE_APLIC_IMSIC; |
| } |
| |
| static bool virt_aclint_allowed(void) |
| { |
| return tcg_enabled() || qtest_enabled(); |
| } |
| |
| static const MemMapEntry virt_memmap[] = { |
| [VIRT_DEBUG] = { 0x0, 0x100 }, |
| [VIRT_MROM] = { 0x1000, 0xf000 }, |
| [VIRT_TEST] = { 0x100000, 0x1000 }, |
| [VIRT_RTC] = { 0x101000, 0x1000 }, |
| [VIRT_CLINT] = { 0x2000000, 0x10000 }, |
| [VIRT_ACLINT_SSWI] = { 0x2F00000, 0x4000 }, |
| [VIRT_PCIE_PIO] = { 0x3000000, 0x10000 }, |
| [VIRT_PLATFORM_BUS] = { 0x4000000, 0x2000000 }, |
| [VIRT_PLIC] = { 0xc000000, VIRT_PLIC_SIZE(VIRT_CPUS_MAX * 2) }, |
| [VIRT_APLIC_M] = { 0xc000000, APLIC_SIZE(VIRT_CPUS_MAX) }, |
| [VIRT_APLIC_S] = { 0xd000000, APLIC_SIZE(VIRT_CPUS_MAX) }, |
| [VIRT_UART0] = { 0x10000000, 0x100 }, |
| [VIRT_VIRTIO] = { 0x10001000, 0x1000 }, |
| [VIRT_FW_CFG] = { 0x10100000, 0x18 }, |
| [VIRT_FLASH] = { 0x20000000, 0x4000000 }, |
| [VIRT_IMSIC_M] = { 0x24000000, VIRT_IMSIC_MAX_SIZE }, |
| [VIRT_IMSIC_S] = { 0x28000000, VIRT_IMSIC_MAX_SIZE }, |
| [VIRT_PCIE_ECAM] = { 0x30000000, 0x10000000 }, |
| [VIRT_PCIE_MMIO] = { 0x40000000, 0x40000000 }, |
| [VIRT_DRAM] = { 0x80000000, 0x0 }, |
| }; |
| |
| /* PCIe high mmio is fixed for RV32 */ |
| #define VIRT32_HIGH_PCIE_MMIO_BASE 0x300000000ULL |
| #define VIRT32_HIGH_PCIE_MMIO_SIZE (4 * GiB) |
| |
| /* PCIe high mmio for RV64, size is fixed but base depends on top of RAM */ |
| #define VIRT64_HIGH_PCIE_MMIO_SIZE (16 * GiB) |
| |
| static MemMapEntry virt_high_pcie_memmap; |
| |
| #define VIRT_FLASH_SECTOR_SIZE (256 * KiB) |
| |
| static PFlashCFI01 *virt_flash_create1(RISCVVirtState *s, |
| const char *name, |
| const char *alias_prop_name) |
| { |
| /* |
| * Create a single flash device. We use the same parameters as |
| * the flash devices on the ARM virt board. |
| */ |
| DeviceState *dev = qdev_new(TYPE_PFLASH_CFI01); |
| |
| qdev_prop_set_uint64(dev, "sector-length", VIRT_FLASH_SECTOR_SIZE); |
| qdev_prop_set_uint8(dev, "width", 4); |
| qdev_prop_set_uint8(dev, "device-width", 2); |
| qdev_prop_set_bit(dev, "big-endian", false); |
| qdev_prop_set_uint16(dev, "id0", 0x89); |
| qdev_prop_set_uint16(dev, "id1", 0x18); |
| qdev_prop_set_uint16(dev, "id2", 0x00); |
| qdev_prop_set_uint16(dev, "id3", 0x00); |
| qdev_prop_set_string(dev, "name", name); |
| |
| object_property_add_child(OBJECT(s), name, OBJECT(dev)); |
| object_property_add_alias(OBJECT(s), alias_prop_name, |
| OBJECT(dev), "drive"); |
| |
| return PFLASH_CFI01(dev); |
| } |
| |
| static void virt_flash_create(RISCVVirtState *s) |
| { |
| s->flash[0] = virt_flash_create1(s, "virt.flash0", "pflash0"); |
| s->flash[1] = virt_flash_create1(s, "virt.flash1", "pflash1"); |
| } |
| |
| static void virt_flash_map1(PFlashCFI01 *flash, |
| hwaddr base, hwaddr size, |
| MemoryRegion *sysmem) |
| { |
| DeviceState *dev = DEVICE(flash); |
| |
| assert(QEMU_IS_ALIGNED(size, VIRT_FLASH_SECTOR_SIZE)); |
| assert(size / VIRT_FLASH_SECTOR_SIZE <= UINT32_MAX); |
| qdev_prop_set_uint32(dev, "num-blocks", size / VIRT_FLASH_SECTOR_SIZE); |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); |
| |
| memory_region_add_subregion(sysmem, base, |
| sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), |
| 0)); |
| } |
| |
| static void virt_flash_map(RISCVVirtState *s, |
| MemoryRegion *sysmem) |
| { |
| hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2; |
| hwaddr flashbase = virt_memmap[VIRT_FLASH].base; |
| |
| virt_flash_map1(s->flash[0], flashbase, flashsize, |
| sysmem); |
| virt_flash_map1(s->flash[1], flashbase + flashsize, flashsize, |
| sysmem); |
| } |
| |
| static void create_pcie_irq_map(RISCVVirtState *s, void *fdt, char *nodename, |
| uint32_t irqchip_phandle) |
| { |
| int pin, dev; |
| uint32_t irq_map_stride = 0; |
| uint32_t full_irq_map[GPEX_NUM_IRQS * GPEX_NUM_IRQS * |
| FDT_MAX_INT_MAP_WIDTH] = {}; |
| uint32_t *irq_map = full_irq_map; |
| |
| /* This code creates a standard swizzle of interrupts such that |
| * each device's first interrupt is based on it's PCI_SLOT number. |
| * (See pci_swizzle_map_irq_fn()) |
| * |
| * We only need one entry per interrupt in the table (not one per |
| * possible slot) seeing the interrupt-map-mask will allow the table |
| * to wrap to any number of devices. |
| */ |
| for (dev = 0; dev < GPEX_NUM_IRQS; dev++) { |
| int devfn = dev * 0x8; |
| |
| for (pin = 0; pin < GPEX_NUM_IRQS; pin++) { |
| int irq_nr = PCIE_IRQ + ((pin + PCI_SLOT(devfn)) % GPEX_NUM_IRQS); |
| int i = 0; |
| |
| /* Fill PCI address cells */ |
| irq_map[i] = cpu_to_be32(devfn << 8); |
| i += FDT_PCI_ADDR_CELLS; |
| |
| /* Fill PCI Interrupt cells */ |
| irq_map[i] = cpu_to_be32(pin + 1); |
| i += FDT_PCI_INT_CELLS; |
| |
| /* Fill interrupt controller phandle and cells */ |
| irq_map[i++] = cpu_to_be32(irqchip_phandle); |
| irq_map[i++] = cpu_to_be32(irq_nr); |
| if (s->aia_type != VIRT_AIA_TYPE_NONE) { |
| irq_map[i++] = cpu_to_be32(0x4); |
| } |
| |
| if (!irq_map_stride) { |
| irq_map_stride = i; |
| } |
| irq_map += irq_map_stride; |
| } |
| } |
| |
| qemu_fdt_setprop(fdt, nodename, "interrupt-map", full_irq_map, |
| GPEX_NUM_IRQS * GPEX_NUM_IRQS * |
| irq_map_stride * sizeof(uint32_t)); |
| |
| qemu_fdt_setprop_cells(fdt, nodename, "interrupt-map-mask", |
| 0x1800, 0, 0, 0x7); |
| } |
| |
| static void create_fdt_socket_cpus(RISCVVirtState *s, int socket, |
| char *clust_name, uint32_t *phandle, |
| uint32_t *intc_phandles) |
| { |
| int cpu; |
| uint32_t cpu_phandle; |
| MachineState *ms = MACHINE(s); |
| bool is_32_bit = riscv_is_32bit(&s->soc[0]); |
| uint8_t satp_mode_max; |
| |
| for (cpu = s->soc[socket].num_harts - 1; cpu >= 0; cpu--) { |
| RISCVCPU *cpu_ptr = &s->soc[socket].harts[cpu]; |
| g_autofree char *cpu_name = NULL; |
| g_autofree char *core_name = NULL; |
| g_autofree char *intc_name = NULL; |
| g_autofree char *sv_name = NULL; |
| |
| cpu_phandle = (*phandle)++; |
| |
| cpu_name = g_strdup_printf("/cpus/cpu@%d", |
| s->soc[socket].hartid_base + cpu); |
| qemu_fdt_add_subnode(ms->fdt, cpu_name); |
| |
| if (cpu_ptr->cfg.satp_mode.supported != 0) { |
| satp_mode_max = satp_mode_max_from_map(cpu_ptr->cfg.satp_mode.map); |
| sv_name = g_strdup_printf("riscv,%s", |
| satp_mode_str(satp_mode_max, is_32_bit)); |
| qemu_fdt_setprop_string(ms->fdt, cpu_name, "mmu-type", sv_name); |
| } |
| |
| riscv_isa_write_fdt(cpu_ptr, ms->fdt, cpu_name); |
| |
| if (cpu_ptr->cfg.ext_zicbom) { |
| qemu_fdt_setprop_cell(ms->fdt, cpu_name, "riscv,cbom-block-size", |
| cpu_ptr->cfg.cbom_blocksize); |
| } |
| |
| if (cpu_ptr->cfg.ext_zicboz) { |
| qemu_fdt_setprop_cell(ms->fdt, cpu_name, "riscv,cboz-block-size", |
| cpu_ptr->cfg.cboz_blocksize); |
| } |
| |
| if (cpu_ptr->cfg.ext_zicbop) { |
| qemu_fdt_setprop_cell(ms->fdt, cpu_name, "riscv,cbop-block-size", |
| cpu_ptr->cfg.cbop_blocksize); |
| } |
| |
| qemu_fdt_setprop_string(ms->fdt, cpu_name, "compatible", "riscv"); |
| qemu_fdt_setprop_string(ms->fdt, cpu_name, "status", "okay"); |
| qemu_fdt_setprop_cell(ms->fdt, cpu_name, "reg", |
| s->soc[socket].hartid_base + cpu); |
| qemu_fdt_setprop_string(ms->fdt, cpu_name, "device_type", "cpu"); |
| riscv_socket_fdt_write_id(ms, cpu_name, socket); |
| qemu_fdt_setprop_cell(ms->fdt, cpu_name, "phandle", cpu_phandle); |
| |
| intc_phandles[cpu] = (*phandle)++; |
| |
| intc_name = g_strdup_printf("%s/interrupt-controller", cpu_name); |
| qemu_fdt_add_subnode(ms->fdt, intc_name); |
| qemu_fdt_setprop_cell(ms->fdt, intc_name, "phandle", |
| intc_phandles[cpu]); |
| qemu_fdt_setprop_string(ms->fdt, intc_name, "compatible", |
| "riscv,cpu-intc"); |
| qemu_fdt_setprop(ms->fdt, intc_name, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop_cell(ms->fdt, intc_name, "#interrupt-cells", 1); |
| |
| core_name = g_strdup_printf("%s/core%d", clust_name, cpu); |
| qemu_fdt_add_subnode(ms->fdt, core_name); |
| qemu_fdt_setprop_cell(ms->fdt, core_name, "cpu", cpu_phandle); |
| } |
| } |
| |
| static void create_fdt_socket_memory(RISCVVirtState *s, |
| const MemMapEntry *memmap, int socket) |
| { |
| g_autofree char *mem_name = NULL; |
| uint64_t addr, size; |
| MachineState *ms = MACHINE(s); |
| |
| addr = memmap[VIRT_DRAM].base + riscv_socket_mem_offset(ms, socket); |
| size = riscv_socket_mem_size(ms, socket); |
| mem_name = g_strdup_printf("/memory@%lx", (long)addr); |
| qemu_fdt_add_subnode(ms->fdt, mem_name); |
| qemu_fdt_setprop_cells(ms->fdt, mem_name, "reg", |
| addr >> 32, addr, size >> 32, size); |
| qemu_fdt_setprop_string(ms->fdt, mem_name, "device_type", "memory"); |
| riscv_socket_fdt_write_id(ms, mem_name, socket); |
| } |
| |
| static void create_fdt_socket_clint(RISCVVirtState *s, |
| const MemMapEntry *memmap, int socket, |
| uint32_t *intc_phandles) |
| { |
| int cpu; |
| g_autofree char *clint_name = NULL; |
| g_autofree uint32_t *clint_cells = NULL; |
| unsigned long clint_addr; |
| MachineState *ms = MACHINE(s); |
| static const char * const clint_compat[2] = { |
| "sifive,clint0", "riscv,clint0" |
| }; |
| |
| clint_cells = g_new0(uint32_t, s->soc[socket].num_harts * 4); |
| |
| for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) { |
| clint_cells[cpu * 4 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| clint_cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT); |
| clint_cells[cpu * 4 + 2] = cpu_to_be32(intc_phandles[cpu]); |
| clint_cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER); |
| } |
| |
| clint_addr = memmap[VIRT_CLINT].base + (memmap[VIRT_CLINT].size * socket); |
| clint_name = g_strdup_printf("/soc/clint@%lx", clint_addr); |
| qemu_fdt_add_subnode(ms->fdt, clint_name); |
| qemu_fdt_setprop_string_array(ms->fdt, clint_name, "compatible", |
| (char **)&clint_compat, |
| ARRAY_SIZE(clint_compat)); |
| qemu_fdt_setprop_cells(ms->fdt, clint_name, "reg", |
| 0x0, clint_addr, 0x0, memmap[VIRT_CLINT].size); |
| qemu_fdt_setprop(ms->fdt, clint_name, "interrupts-extended", |
| clint_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4); |
| riscv_socket_fdt_write_id(ms, clint_name, socket); |
| } |
| |
| static void create_fdt_socket_aclint(RISCVVirtState *s, |
| const MemMapEntry *memmap, int socket, |
| uint32_t *intc_phandles) |
| { |
| int cpu; |
| char *name; |
| unsigned long addr, size; |
| uint32_t aclint_cells_size; |
| g_autofree uint32_t *aclint_mswi_cells = NULL; |
| g_autofree uint32_t *aclint_sswi_cells = NULL; |
| g_autofree uint32_t *aclint_mtimer_cells = NULL; |
| MachineState *ms = MACHINE(s); |
| |
| aclint_mswi_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2); |
| aclint_mtimer_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2); |
| aclint_sswi_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2); |
| |
| for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) { |
| aclint_mswi_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| aclint_mswi_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_M_SOFT); |
| aclint_mtimer_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| aclint_mtimer_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_M_TIMER); |
| aclint_sswi_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| aclint_sswi_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_S_SOFT); |
| } |
| aclint_cells_size = s->soc[socket].num_harts * sizeof(uint32_t) * 2; |
| |
| if (s->aia_type != VIRT_AIA_TYPE_APLIC_IMSIC) { |
| addr = memmap[VIRT_CLINT].base + (memmap[VIRT_CLINT].size * socket); |
| name = g_strdup_printf("/soc/mswi@%lx", addr); |
| qemu_fdt_add_subnode(ms->fdt, name); |
| qemu_fdt_setprop_string(ms->fdt, name, "compatible", |
| "riscv,aclint-mswi"); |
| qemu_fdt_setprop_cells(ms->fdt, name, "reg", |
| 0x0, addr, 0x0, RISCV_ACLINT_SWI_SIZE); |
| qemu_fdt_setprop(ms->fdt, name, "interrupts-extended", |
| aclint_mswi_cells, aclint_cells_size); |
| qemu_fdt_setprop(ms->fdt, name, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop_cell(ms->fdt, name, "#interrupt-cells", 0); |
| riscv_socket_fdt_write_id(ms, name, socket); |
| g_free(name); |
| } |
| |
| if (s->aia_type == VIRT_AIA_TYPE_APLIC_IMSIC) { |
| addr = memmap[VIRT_CLINT].base + |
| (RISCV_ACLINT_DEFAULT_MTIMER_SIZE * socket); |
| size = RISCV_ACLINT_DEFAULT_MTIMER_SIZE; |
| } else { |
| addr = memmap[VIRT_CLINT].base + RISCV_ACLINT_SWI_SIZE + |
| (memmap[VIRT_CLINT].size * socket); |
| size = memmap[VIRT_CLINT].size - RISCV_ACLINT_SWI_SIZE; |
| } |
| name = g_strdup_printf("/soc/mtimer@%lx", addr); |
| qemu_fdt_add_subnode(ms->fdt, name); |
| qemu_fdt_setprop_string(ms->fdt, name, "compatible", |
| "riscv,aclint-mtimer"); |
| qemu_fdt_setprop_cells(ms->fdt, name, "reg", |
| 0x0, addr + RISCV_ACLINT_DEFAULT_MTIME, |
| 0x0, size - RISCV_ACLINT_DEFAULT_MTIME, |
| 0x0, addr + RISCV_ACLINT_DEFAULT_MTIMECMP, |
| 0x0, RISCV_ACLINT_DEFAULT_MTIME); |
| qemu_fdt_setprop(ms->fdt, name, "interrupts-extended", |
| aclint_mtimer_cells, aclint_cells_size); |
| riscv_socket_fdt_write_id(ms, name, socket); |
| g_free(name); |
| |
| if (s->aia_type != VIRT_AIA_TYPE_APLIC_IMSIC) { |
| addr = memmap[VIRT_ACLINT_SSWI].base + |
| (memmap[VIRT_ACLINT_SSWI].size * socket); |
| name = g_strdup_printf("/soc/sswi@%lx", addr); |
| qemu_fdt_add_subnode(ms->fdt, name); |
| qemu_fdt_setprop_string(ms->fdt, name, "compatible", |
| "riscv,aclint-sswi"); |
| qemu_fdt_setprop_cells(ms->fdt, name, "reg", |
| 0x0, addr, 0x0, memmap[VIRT_ACLINT_SSWI].size); |
| qemu_fdt_setprop(ms->fdt, name, "interrupts-extended", |
| aclint_sswi_cells, aclint_cells_size); |
| qemu_fdt_setprop(ms->fdt, name, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop_cell(ms->fdt, name, "#interrupt-cells", 0); |
| riscv_socket_fdt_write_id(ms, name, socket); |
| g_free(name); |
| } |
| } |
| |
| static void create_fdt_socket_plic(RISCVVirtState *s, |
| const MemMapEntry *memmap, int socket, |
| uint32_t *phandle, uint32_t *intc_phandles, |
| uint32_t *plic_phandles) |
| { |
| int cpu; |
| g_autofree char *plic_name = NULL; |
| g_autofree uint32_t *plic_cells; |
| unsigned long plic_addr; |
| MachineState *ms = MACHINE(s); |
| static const char * const plic_compat[2] = { |
| "sifive,plic-1.0.0", "riscv,plic0" |
| }; |
| |
| plic_phandles[socket] = (*phandle)++; |
| plic_addr = memmap[VIRT_PLIC].base + (memmap[VIRT_PLIC].size * socket); |
| plic_name = g_strdup_printf("/soc/plic@%lx", plic_addr); |
| qemu_fdt_add_subnode(ms->fdt, plic_name); |
| qemu_fdt_setprop_cell(ms->fdt, plic_name, |
| "#interrupt-cells", FDT_PLIC_INT_CELLS); |
| qemu_fdt_setprop_cell(ms->fdt, plic_name, |
| "#address-cells", FDT_PLIC_ADDR_CELLS); |
| qemu_fdt_setprop_string_array(ms->fdt, plic_name, "compatible", |
| (char **)&plic_compat, |
| ARRAY_SIZE(plic_compat)); |
| qemu_fdt_setprop(ms->fdt, plic_name, "interrupt-controller", NULL, 0); |
| |
| if (kvm_enabled()) { |
| plic_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2); |
| |
| for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) { |
| plic_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| plic_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_S_EXT); |
| } |
| |
| qemu_fdt_setprop(ms->fdt, plic_name, "interrupts-extended", |
| plic_cells, |
| s->soc[socket].num_harts * sizeof(uint32_t) * 2); |
| } else { |
| plic_cells = g_new0(uint32_t, s->soc[socket].num_harts * 4); |
| |
| for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) { |
| plic_cells[cpu * 4 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| plic_cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_EXT); |
| plic_cells[cpu * 4 + 2] = cpu_to_be32(intc_phandles[cpu]); |
| plic_cells[cpu * 4 + 3] = cpu_to_be32(IRQ_S_EXT); |
| } |
| |
| qemu_fdt_setprop(ms->fdt, plic_name, "interrupts-extended", |
| plic_cells, |
| s->soc[socket].num_harts * sizeof(uint32_t) * 4); |
| } |
| |
| qemu_fdt_setprop_cells(ms->fdt, plic_name, "reg", |
| 0x0, plic_addr, 0x0, memmap[VIRT_PLIC].size); |
| qemu_fdt_setprop_cell(ms->fdt, plic_name, "riscv,ndev", |
| VIRT_IRQCHIP_NUM_SOURCES - 1); |
| riscv_socket_fdt_write_id(ms, plic_name, socket); |
| qemu_fdt_setprop_cell(ms->fdt, plic_name, "phandle", |
| plic_phandles[socket]); |
| |
| if (!socket) { |
| platform_bus_add_all_fdt_nodes(ms->fdt, plic_name, |
| memmap[VIRT_PLATFORM_BUS].base, |
| memmap[VIRT_PLATFORM_BUS].size, |
| VIRT_PLATFORM_BUS_IRQ); |
| } |
| } |
| |
| uint32_t imsic_num_bits(uint32_t count) |
| { |
| uint32_t ret = 0; |
| |
| while (BIT(ret) < count) { |
| ret++; |
| } |
| |
| return ret; |
| } |
| |
| static void create_fdt_one_imsic(RISCVVirtState *s, hwaddr base_addr, |
| uint32_t *intc_phandles, uint32_t msi_phandle, |
| bool m_mode, uint32_t imsic_guest_bits) |
| { |
| int cpu, socket; |
| g_autofree char *imsic_name = NULL; |
| MachineState *ms = MACHINE(s); |
| int socket_count = riscv_socket_count(ms); |
| uint32_t imsic_max_hart_per_socket, imsic_addr, imsic_size; |
| g_autofree uint32_t *imsic_cells = NULL; |
| g_autofree uint32_t *imsic_regs = NULL; |
| static const char * const imsic_compat[2] = { |
| "qemu,imsics", "riscv,imsics" |
| }; |
| |
| imsic_cells = g_new0(uint32_t, ms->smp.cpus * 2); |
| imsic_regs = g_new0(uint32_t, socket_count * 4); |
| |
| for (cpu = 0; cpu < ms->smp.cpus; cpu++) { |
| imsic_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| imsic_cells[cpu * 2 + 1] = cpu_to_be32(m_mode ? IRQ_M_EXT : IRQ_S_EXT); |
| } |
| |
| imsic_max_hart_per_socket = 0; |
| for (socket = 0; socket < socket_count; socket++) { |
| imsic_addr = base_addr + socket * VIRT_IMSIC_GROUP_MAX_SIZE; |
| imsic_size = IMSIC_HART_SIZE(imsic_guest_bits) * |
| s->soc[socket].num_harts; |
| imsic_regs[socket * 4 + 0] = 0; |
| imsic_regs[socket * 4 + 1] = cpu_to_be32(imsic_addr); |
| imsic_regs[socket * 4 + 2] = 0; |
| imsic_regs[socket * 4 + 3] = cpu_to_be32(imsic_size); |
| if (imsic_max_hart_per_socket < s->soc[socket].num_harts) { |
| imsic_max_hart_per_socket = s->soc[socket].num_harts; |
| } |
| } |
| |
| imsic_name = g_strdup_printf("/soc/interrupt-controller@%lx", |
| (unsigned long)base_addr); |
| qemu_fdt_add_subnode(ms->fdt, imsic_name); |
| qemu_fdt_setprop_string_array(ms->fdt, imsic_name, "compatible", |
| (char **)&imsic_compat, |
| ARRAY_SIZE(imsic_compat)); |
| |
| qemu_fdt_setprop_cell(ms->fdt, imsic_name, "#interrupt-cells", |
| FDT_IMSIC_INT_CELLS); |
| qemu_fdt_setprop(ms->fdt, imsic_name, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop(ms->fdt, imsic_name, "msi-controller", NULL, 0); |
| qemu_fdt_setprop_cell(ms->fdt, imsic_name, "#msi-cells", 0); |
| qemu_fdt_setprop(ms->fdt, imsic_name, "interrupts-extended", |
| imsic_cells, ms->smp.cpus * sizeof(uint32_t) * 2); |
| qemu_fdt_setprop(ms->fdt, imsic_name, "reg", imsic_regs, |
| socket_count * sizeof(uint32_t) * 4); |
| qemu_fdt_setprop_cell(ms->fdt, imsic_name, "riscv,num-ids", |
| VIRT_IRQCHIP_NUM_MSIS); |
| |
| if (imsic_guest_bits) { |
| qemu_fdt_setprop_cell(ms->fdt, imsic_name, "riscv,guest-index-bits", |
| imsic_guest_bits); |
| } |
| |
| if (socket_count > 1) { |
| qemu_fdt_setprop_cell(ms->fdt, imsic_name, "riscv,hart-index-bits", |
| imsic_num_bits(imsic_max_hart_per_socket)); |
| qemu_fdt_setprop_cell(ms->fdt, imsic_name, "riscv,group-index-bits", |
| imsic_num_bits(socket_count)); |
| qemu_fdt_setprop_cell(ms->fdt, imsic_name, "riscv,group-index-shift", |
| IMSIC_MMIO_GROUP_MIN_SHIFT); |
| } |
| qemu_fdt_setprop_cell(ms->fdt, imsic_name, "phandle", msi_phandle); |
| } |
| |
| static void create_fdt_imsic(RISCVVirtState *s, const MemMapEntry *memmap, |
| uint32_t *phandle, uint32_t *intc_phandles, |
| uint32_t *msi_m_phandle, uint32_t *msi_s_phandle) |
| { |
| *msi_m_phandle = (*phandle)++; |
| *msi_s_phandle = (*phandle)++; |
| |
| if (!kvm_enabled()) { |
| /* M-level IMSIC node */ |
| create_fdt_one_imsic(s, memmap[VIRT_IMSIC_M].base, intc_phandles, |
| *msi_m_phandle, true, 0); |
| } |
| |
| /* S-level IMSIC node */ |
| create_fdt_one_imsic(s, memmap[VIRT_IMSIC_S].base, intc_phandles, |
| *msi_s_phandle, false, |
| imsic_num_bits(s->aia_guests + 1)); |
| |
| } |
| |
| /* Caller must free string after use */ |
| static char *fdt_get_aplic_nodename(unsigned long aplic_addr) |
| { |
| return g_strdup_printf("/soc/interrupt-controller@%lx", aplic_addr); |
| } |
| |
| static void create_fdt_one_aplic(RISCVVirtState *s, int socket, |
| unsigned long aplic_addr, uint32_t aplic_size, |
| uint32_t msi_phandle, |
| uint32_t *intc_phandles, |
| uint32_t aplic_phandle, |
| uint32_t aplic_child_phandle, |
| bool m_mode, int num_harts) |
| { |
| int cpu; |
| g_autofree char *aplic_name = fdt_get_aplic_nodename(aplic_addr); |
| g_autofree uint32_t *aplic_cells = g_new0(uint32_t, num_harts * 2); |
| MachineState *ms = MACHINE(s); |
| static const char * const aplic_compat[2] = { |
| "qemu,aplic", "riscv,aplic" |
| }; |
| |
| for (cpu = 0; cpu < num_harts; cpu++) { |
| aplic_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| aplic_cells[cpu * 2 + 1] = cpu_to_be32(m_mode ? IRQ_M_EXT : IRQ_S_EXT); |
| } |
| |
| qemu_fdt_add_subnode(ms->fdt, aplic_name); |
| qemu_fdt_setprop_string_array(ms->fdt, aplic_name, "compatible", |
| (char **)&aplic_compat, |
| ARRAY_SIZE(aplic_compat)); |
| qemu_fdt_setprop_cell(ms->fdt, aplic_name, "#address-cells", |
| FDT_APLIC_ADDR_CELLS); |
| qemu_fdt_setprop_cell(ms->fdt, aplic_name, |
| "#interrupt-cells", FDT_APLIC_INT_CELLS); |
| qemu_fdt_setprop(ms->fdt, aplic_name, "interrupt-controller", NULL, 0); |
| |
| if (s->aia_type == VIRT_AIA_TYPE_APLIC) { |
| qemu_fdt_setprop(ms->fdt, aplic_name, "interrupts-extended", |
| aplic_cells, num_harts * sizeof(uint32_t) * 2); |
| } else { |
| qemu_fdt_setprop_cell(ms->fdt, aplic_name, "msi-parent", msi_phandle); |
| } |
| |
| qemu_fdt_setprop_cells(ms->fdt, aplic_name, "reg", |
| 0x0, aplic_addr, 0x0, aplic_size); |
| qemu_fdt_setprop_cell(ms->fdt, aplic_name, "riscv,num-sources", |
| VIRT_IRQCHIP_NUM_SOURCES); |
| |
| if (aplic_child_phandle) { |
| qemu_fdt_setprop_cell(ms->fdt, aplic_name, "riscv,children", |
| aplic_child_phandle); |
| qemu_fdt_setprop_cells(ms->fdt, aplic_name, "riscv,delegation", |
| aplic_child_phandle, 0x1, |
| VIRT_IRQCHIP_NUM_SOURCES); |
| } |
| |
| riscv_socket_fdt_write_id(ms, aplic_name, socket); |
| qemu_fdt_setprop_cell(ms->fdt, aplic_name, "phandle", aplic_phandle); |
| } |
| |
| static void create_fdt_socket_aplic(RISCVVirtState *s, |
| const MemMapEntry *memmap, int socket, |
| uint32_t msi_m_phandle, |
| uint32_t msi_s_phandle, |
| uint32_t *phandle, |
| uint32_t *intc_phandles, |
| uint32_t *aplic_phandles, |
| int num_harts) |
| { |
| unsigned long aplic_addr; |
| MachineState *ms = MACHINE(s); |
| uint32_t aplic_m_phandle, aplic_s_phandle; |
| |
| aplic_m_phandle = (*phandle)++; |
| aplic_s_phandle = (*phandle)++; |
| |
| if (!kvm_enabled()) { |
| /* M-level APLIC node */ |
| aplic_addr = memmap[VIRT_APLIC_M].base + |
| (memmap[VIRT_APLIC_M].size * socket); |
| create_fdt_one_aplic(s, socket, aplic_addr, memmap[VIRT_APLIC_M].size, |
| msi_m_phandle, intc_phandles, |
| aplic_m_phandle, aplic_s_phandle, |
| true, num_harts); |
| } |
| |
| /* S-level APLIC node */ |
| aplic_addr = memmap[VIRT_APLIC_S].base + |
| (memmap[VIRT_APLIC_S].size * socket); |
| create_fdt_one_aplic(s, socket, aplic_addr, memmap[VIRT_APLIC_S].size, |
| msi_s_phandle, intc_phandles, |
| aplic_s_phandle, 0, |
| false, num_harts); |
| |
| if (!socket) { |
| g_autofree char *aplic_name = fdt_get_aplic_nodename(aplic_addr); |
| platform_bus_add_all_fdt_nodes(ms->fdt, aplic_name, |
| memmap[VIRT_PLATFORM_BUS].base, |
| memmap[VIRT_PLATFORM_BUS].size, |
| VIRT_PLATFORM_BUS_IRQ); |
| } |
| |
| aplic_phandles[socket] = aplic_s_phandle; |
| } |
| |
| static void create_fdt_pmu(RISCVVirtState *s) |
| { |
| g_autofree char *pmu_name = g_strdup_printf("/pmu"); |
| MachineState *ms = MACHINE(s); |
| RISCVCPU hart = s->soc[0].harts[0]; |
| |
| qemu_fdt_add_subnode(ms->fdt, pmu_name); |
| qemu_fdt_setprop_string(ms->fdt, pmu_name, "compatible", "riscv,pmu"); |
| riscv_pmu_generate_fdt_node(ms->fdt, hart.pmu_avail_ctrs, pmu_name); |
| } |
| |
| static void create_fdt_sockets(RISCVVirtState *s, const MemMapEntry *memmap, |
| uint32_t *phandle, |
| uint32_t *irq_mmio_phandle, |
| uint32_t *irq_pcie_phandle, |
| uint32_t *irq_virtio_phandle, |
| uint32_t *msi_pcie_phandle) |
| { |
| int socket, phandle_pos; |
| MachineState *ms = MACHINE(s); |
| uint32_t msi_m_phandle = 0, msi_s_phandle = 0; |
| uint32_t xplic_phandles[MAX_NODES]; |
| g_autofree uint32_t *intc_phandles = NULL; |
| int socket_count = riscv_socket_count(ms); |
| |
| qemu_fdt_add_subnode(ms->fdt, "/cpus"); |
| qemu_fdt_setprop_cell(ms->fdt, "/cpus", "timebase-frequency", |
| kvm_enabled() ? |
| kvm_riscv_get_timebase_frequency(first_cpu) : |
| RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ); |
| qemu_fdt_setprop_cell(ms->fdt, "/cpus", "#size-cells", 0x0); |
| qemu_fdt_setprop_cell(ms->fdt, "/cpus", "#address-cells", 0x1); |
| qemu_fdt_add_subnode(ms->fdt, "/cpus/cpu-map"); |
| |
| intc_phandles = g_new0(uint32_t, ms->smp.cpus); |
| |
| phandle_pos = ms->smp.cpus; |
| for (socket = (socket_count - 1); socket >= 0; socket--) { |
| g_autofree char *clust_name = NULL; |
| phandle_pos -= s->soc[socket].num_harts; |
| |
| clust_name = g_strdup_printf("/cpus/cpu-map/cluster%d", socket); |
| qemu_fdt_add_subnode(ms->fdt, clust_name); |
| |
| create_fdt_socket_cpus(s, socket, clust_name, phandle, |
| &intc_phandles[phandle_pos]); |
| |
| create_fdt_socket_memory(s, memmap, socket); |
| |
| if (virt_aclint_allowed() && s->have_aclint) { |
| create_fdt_socket_aclint(s, memmap, socket, |
| &intc_phandles[phandle_pos]); |
| } else if (tcg_enabled()) { |
| create_fdt_socket_clint(s, memmap, socket, |
| &intc_phandles[phandle_pos]); |
| } |
| } |
| |
| if (s->aia_type == VIRT_AIA_TYPE_APLIC_IMSIC) { |
| create_fdt_imsic(s, memmap, phandle, intc_phandles, |
| &msi_m_phandle, &msi_s_phandle); |
| *msi_pcie_phandle = msi_s_phandle; |
| } |
| |
| /* KVM AIA only has one APLIC instance */ |
| if (kvm_enabled() && virt_use_kvm_aia(s)) { |
| create_fdt_socket_aplic(s, memmap, 0, |
| msi_m_phandle, msi_s_phandle, phandle, |
| &intc_phandles[0], xplic_phandles, |
| ms->smp.cpus); |
| } else { |
| phandle_pos = ms->smp.cpus; |
| for (socket = (socket_count - 1); socket >= 0; socket--) { |
| phandle_pos -= s->soc[socket].num_harts; |
| |
| if (s->aia_type == VIRT_AIA_TYPE_NONE) { |
| create_fdt_socket_plic(s, memmap, socket, phandle, |
| &intc_phandles[phandle_pos], |
| xplic_phandles); |
| } else { |
| create_fdt_socket_aplic(s, memmap, socket, |
| msi_m_phandle, msi_s_phandle, phandle, |
| &intc_phandles[phandle_pos], |
| xplic_phandles, |
| s->soc[socket].num_harts); |
| } |
| } |
| } |
| |
| if (kvm_enabled() && virt_use_kvm_aia(s)) { |
| *irq_mmio_phandle = xplic_phandles[0]; |
| *irq_virtio_phandle = xplic_phandles[0]; |
| *irq_pcie_phandle = xplic_phandles[0]; |
| } else { |
| for (socket = 0; socket < socket_count; socket++) { |
| if (socket == 0) { |
| *irq_mmio_phandle = xplic_phandles[socket]; |
| *irq_virtio_phandle = xplic_phandles[socket]; |
| *irq_pcie_phandle = xplic_phandles[socket]; |
| } |
| if (socket == 1) { |
| *irq_virtio_phandle = xplic_phandles[socket]; |
| *irq_pcie_phandle = xplic_phandles[socket]; |
| } |
| if (socket == 2) { |
| *irq_pcie_phandle = xplic_phandles[socket]; |
| } |
| } |
| } |
| |
| riscv_socket_fdt_write_distance_matrix(ms); |
| } |
| |
| static void create_fdt_virtio(RISCVVirtState *s, const MemMapEntry *memmap, |
| uint32_t irq_virtio_phandle) |
| { |
| int i; |
| MachineState *ms = MACHINE(s); |
| |
| for (i = 0; i < VIRTIO_COUNT; i++) { |
| g_autofree char *name = g_strdup_printf("/soc/virtio_mmio@%lx", |
| (long)(memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size)); |
| |
| qemu_fdt_add_subnode(ms->fdt, name); |
| qemu_fdt_setprop_string(ms->fdt, name, "compatible", "virtio,mmio"); |
| qemu_fdt_setprop_cells(ms->fdt, name, "reg", |
| 0x0, memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size, |
| 0x0, memmap[VIRT_VIRTIO].size); |
| qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent", |
| irq_virtio_phandle); |
| if (s->aia_type == VIRT_AIA_TYPE_NONE) { |
| qemu_fdt_setprop_cell(ms->fdt, name, "interrupts", |
| VIRTIO_IRQ + i); |
| } else { |
| qemu_fdt_setprop_cells(ms->fdt, name, "interrupts", |
| VIRTIO_IRQ + i, 0x4); |
| } |
| } |
| } |
| |
| static void create_fdt_pcie(RISCVVirtState *s, const MemMapEntry *memmap, |
| uint32_t irq_pcie_phandle, |
| uint32_t msi_pcie_phandle) |
| { |
| g_autofree char *name = NULL; |
| MachineState *ms = MACHINE(s); |
| |
| name = g_strdup_printf("/soc/pci@%lx", |
| (long) memmap[VIRT_PCIE_ECAM].base); |
| qemu_fdt_setprop_cell(ms->fdt, name, "#address-cells", |
| FDT_PCI_ADDR_CELLS); |
| qemu_fdt_setprop_cell(ms->fdt, name, "#interrupt-cells", |
| FDT_PCI_INT_CELLS); |
| qemu_fdt_setprop_cell(ms->fdt, name, "#size-cells", 0x2); |
| qemu_fdt_setprop_string(ms->fdt, name, "compatible", |
| "pci-host-ecam-generic"); |
| qemu_fdt_setprop_string(ms->fdt, name, "device_type", "pci"); |
| qemu_fdt_setprop_cell(ms->fdt, name, "linux,pci-domain", 0); |
| qemu_fdt_setprop_cells(ms->fdt, name, "bus-range", 0, |
| memmap[VIRT_PCIE_ECAM].size / PCIE_MMCFG_SIZE_MIN - 1); |
| qemu_fdt_setprop(ms->fdt, name, "dma-coherent", NULL, 0); |
| if (s->aia_type == VIRT_AIA_TYPE_APLIC_IMSIC) { |
| qemu_fdt_setprop_cell(ms->fdt, name, "msi-parent", msi_pcie_phandle); |
| } |
| qemu_fdt_setprop_cells(ms->fdt, name, "reg", 0, |
| memmap[VIRT_PCIE_ECAM].base, 0, memmap[VIRT_PCIE_ECAM].size); |
| qemu_fdt_setprop_sized_cells(ms->fdt, name, "ranges", |
| 1, FDT_PCI_RANGE_IOPORT, 2, 0, |
| 2, memmap[VIRT_PCIE_PIO].base, 2, memmap[VIRT_PCIE_PIO].size, |
| 1, FDT_PCI_RANGE_MMIO, |
| 2, memmap[VIRT_PCIE_MMIO].base, |
| 2, memmap[VIRT_PCIE_MMIO].base, 2, memmap[VIRT_PCIE_MMIO].size, |
| 1, FDT_PCI_RANGE_MMIO_64BIT, |
| 2, virt_high_pcie_memmap.base, |
| 2, virt_high_pcie_memmap.base, 2, virt_high_pcie_memmap.size); |
| |
| create_pcie_irq_map(s, ms->fdt, name, irq_pcie_phandle); |
| } |
| |
| static void create_fdt_reset(RISCVVirtState *s, const MemMapEntry *memmap, |
| uint32_t *phandle) |
| { |
| char *name; |
| uint32_t test_phandle; |
| MachineState *ms = MACHINE(s); |
| |
| test_phandle = (*phandle)++; |
| name = g_strdup_printf("/soc/test@%lx", |
| (long)memmap[VIRT_TEST].base); |
| qemu_fdt_add_subnode(ms->fdt, name); |
| { |
| static const char * const compat[3] = { |
| "sifive,test1", "sifive,test0", "syscon" |
| }; |
| qemu_fdt_setprop_string_array(ms->fdt, name, "compatible", |
| (char **)&compat, ARRAY_SIZE(compat)); |
| } |
| qemu_fdt_setprop_cells(ms->fdt, name, "reg", |
| 0x0, memmap[VIRT_TEST].base, 0x0, memmap[VIRT_TEST].size); |
| qemu_fdt_setprop_cell(ms->fdt, name, "phandle", test_phandle); |
| test_phandle = qemu_fdt_get_phandle(ms->fdt, name); |
| g_free(name); |
| |
| name = g_strdup_printf("/reboot"); |
| qemu_fdt_add_subnode(ms->fdt, name); |
| qemu_fdt_setprop_string(ms->fdt, name, "compatible", "syscon-reboot"); |
| qemu_fdt_setprop_cell(ms->fdt, name, "regmap", test_phandle); |
| qemu_fdt_setprop_cell(ms->fdt, name, "offset", 0x0); |
| qemu_fdt_setprop_cell(ms->fdt, name, "value", FINISHER_RESET); |
| g_free(name); |
| |
| name = g_strdup_printf("/poweroff"); |
| qemu_fdt_add_subnode(ms->fdt, name); |
| qemu_fdt_setprop_string(ms->fdt, name, "compatible", "syscon-poweroff"); |
| qemu_fdt_setprop_cell(ms->fdt, name, "regmap", test_phandle); |
| qemu_fdt_setprop_cell(ms->fdt, name, "offset", 0x0); |
| qemu_fdt_setprop_cell(ms->fdt, name, "value", FINISHER_PASS); |
| g_free(name); |
| } |
| |
| static void create_fdt_uart(RISCVVirtState *s, const MemMapEntry *memmap, |
| uint32_t irq_mmio_phandle) |
| { |
| g_autofree char *name = NULL; |
| MachineState *ms = MACHINE(s); |
| |
| name = g_strdup_printf("/soc/serial@%lx", (long)memmap[VIRT_UART0].base); |
| qemu_fdt_add_subnode(ms->fdt, name); |
| qemu_fdt_setprop_string(ms->fdt, name, "compatible", "ns16550a"); |
| qemu_fdt_setprop_cells(ms->fdt, name, "reg", |
| 0x0, memmap[VIRT_UART0].base, |
| 0x0, memmap[VIRT_UART0].size); |
| qemu_fdt_setprop_cell(ms->fdt, name, "clock-frequency", 3686400); |
| qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent", irq_mmio_phandle); |
| if (s->aia_type == VIRT_AIA_TYPE_NONE) { |
| qemu_fdt_setprop_cell(ms->fdt, name, "interrupts", UART0_IRQ); |
| } else { |
| qemu_fdt_setprop_cells(ms->fdt, name, "interrupts", UART0_IRQ, 0x4); |
| } |
| |
| qemu_fdt_setprop_string(ms->fdt, "/chosen", "stdout-path", name); |
| } |
| |
| static void create_fdt_rtc(RISCVVirtState *s, const MemMapEntry *memmap, |
| uint32_t irq_mmio_phandle) |
| { |
| g_autofree char *name = NULL; |
| MachineState *ms = MACHINE(s); |
| |
| name = g_strdup_printf("/soc/rtc@%lx", (long)memmap[VIRT_RTC].base); |
| qemu_fdt_add_subnode(ms->fdt, name); |
| qemu_fdt_setprop_string(ms->fdt, name, "compatible", |
| "google,goldfish-rtc"); |
| qemu_fdt_setprop_cells(ms->fdt, name, "reg", |
| 0x0, memmap[VIRT_RTC].base, 0x0, memmap[VIRT_RTC].size); |
| qemu_fdt_setprop_cell(ms->fdt, name, "interrupt-parent", |
| irq_mmio_phandle); |
| if (s->aia_type == VIRT_AIA_TYPE_NONE) { |
| qemu_fdt_setprop_cell(ms->fdt, name, "interrupts", RTC_IRQ); |
| } else { |
| qemu_fdt_setprop_cells(ms->fdt, name, "interrupts", RTC_IRQ, 0x4); |
| } |
| } |
| |
| static void create_fdt_flash(RISCVVirtState *s, const MemMapEntry *memmap) |
| { |
| MachineState *ms = MACHINE(s); |
| hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2; |
| hwaddr flashbase = virt_memmap[VIRT_FLASH].base; |
| g_autofree char *name = g_strdup_printf("/flash@%" PRIx64, flashbase); |
| |
| qemu_fdt_add_subnode(ms->fdt, name); |
| qemu_fdt_setprop_string(ms->fdt, name, "compatible", "cfi-flash"); |
| qemu_fdt_setprop_sized_cells(ms->fdt, name, "reg", |
| 2, flashbase, 2, flashsize, |
| 2, flashbase + flashsize, 2, flashsize); |
| qemu_fdt_setprop_cell(ms->fdt, name, "bank-width", 4); |
| } |
| |
| static void create_fdt_fw_cfg(RISCVVirtState *s, const MemMapEntry *memmap) |
| { |
| MachineState *ms = MACHINE(s); |
| hwaddr base = memmap[VIRT_FW_CFG].base; |
| hwaddr size = memmap[VIRT_FW_CFG].size; |
| g_autofree char *nodename = g_strdup_printf("/fw-cfg@%" PRIx64, base); |
| |
| qemu_fdt_add_subnode(ms->fdt, nodename); |
| qemu_fdt_setprop_string(ms->fdt, nodename, |
| "compatible", "qemu,fw-cfg-mmio"); |
| qemu_fdt_setprop_sized_cells(ms->fdt, nodename, "reg", |
| 2, base, 2, size); |
| qemu_fdt_setprop(ms->fdt, nodename, "dma-coherent", NULL, 0); |
| } |
| |
| static void create_fdt_virtio_iommu(RISCVVirtState *s, uint16_t bdf) |
| { |
| const char compat[] = "virtio,pci-iommu\0pci1af4,1057"; |
| void *fdt = MACHINE(s)->fdt; |
| uint32_t iommu_phandle; |
| g_autofree char *iommu_node = NULL; |
| g_autofree char *pci_node = NULL; |
| |
| pci_node = g_strdup_printf("/soc/pci@%lx", |
| (long) virt_memmap[VIRT_PCIE_ECAM].base); |
| iommu_node = g_strdup_printf("%s/virtio_iommu@%x,%x", pci_node, |
| PCI_SLOT(bdf), PCI_FUNC(bdf)); |
| iommu_phandle = qemu_fdt_alloc_phandle(fdt); |
| |
| qemu_fdt_add_subnode(fdt, iommu_node); |
| |
| qemu_fdt_setprop(fdt, iommu_node, "compatible", compat, sizeof(compat)); |
| qemu_fdt_setprop_sized_cells(fdt, iommu_node, "reg", |
| 1, bdf << 8, 1, 0, 1, 0, |
| 1, 0, 1, 0); |
| qemu_fdt_setprop_cell(fdt, iommu_node, "#iommu-cells", 1); |
| qemu_fdt_setprop_cell(fdt, iommu_node, "phandle", iommu_phandle); |
| |
| qemu_fdt_setprop_cells(fdt, pci_node, "iommu-map", |
| 0, iommu_phandle, 0, bdf, |
| bdf + 1, iommu_phandle, bdf + 1, 0xffff - bdf); |
| } |
| |
| static void finalize_fdt(RISCVVirtState *s) |
| { |
| uint32_t phandle = 1, irq_mmio_phandle = 1, msi_pcie_phandle = 1; |
| uint32_t irq_pcie_phandle = 1, irq_virtio_phandle = 1; |
| |
| create_fdt_sockets(s, virt_memmap, &phandle, &irq_mmio_phandle, |
| &irq_pcie_phandle, &irq_virtio_phandle, |
| &msi_pcie_phandle); |
| |
| create_fdt_virtio(s, virt_memmap, irq_virtio_phandle); |
| |
| create_fdt_pcie(s, virt_memmap, irq_pcie_phandle, msi_pcie_phandle); |
| |
| create_fdt_reset(s, virt_memmap, &phandle); |
| |
| create_fdt_uart(s, virt_memmap, irq_mmio_phandle); |
| |
| create_fdt_rtc(s, virt_memmap, irq_mmio_phandle); |
| } |
| |
| static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap) |
| { |
| MachineState *ms = MACHINE(s); |
| uint8_t rng_seed[32]; |
| g_autofree char *name = NULL; |
| |
| ms->fdt = create_device_tree(&s->fdt_size); |
| if (!ms->fdt) { |
| error_report("create_device_tree() failed"); |
| exit(1); |
| } |
| |
| qemu_fdt_setprop_string(ms->fdt, "/", "model", "riscv-virtio,qemu"); |
| qemu_fdt_setprop_string(ms->fdt, "/", "compatible", "riscv-virtio"); |
| qemu_fdt_setprop_cell(ms->fdt, "/", "#size-cells", 0x2); |
| qemu_fdt_setprop_cell(ms->fdt, "/", "#address-cells", 0x2); |
| |
| qemu_fdt_add_subnode(ms->fdt, "/soc"); |
| qemu_fdt_setprop(ms->fdt, "/soc", "ranges", NULL, 0); |
| qemu_fdt_setprop_string(ms->fdt, "/soc", "compatible", "simple-bus"); |
| qemu_fdt_setprop_cell(ms->fdt, "/soc", "#size-cells", 0x2); |
| qemu_fdt_setprop_cell(ms->fdt, "/soc", "#address-cells", 0x2); |
| |
| /* |
| * The "/soc/pci@..." node is needed for PCIE hotplugs |
| * that might happen before finalize_fdt(). |
| */ |
| name = g_strdup_printf("/soc/pci@%lx", (long) memmap[VIRT_PCIE_ECAM].base); |
| qemu_fdt_add_subnode(ms->fdt, name); |
| |
| qemu_fdt_add_subnode(ms->fdt, "/chosen"); |
| |
| /* Pass seed to RNG */ |
| qemu_guest_getrandom_nofail(rng_seed, sizeof(rng_seed)); |
| qemu_fdt_setprop(ms->fdt, "/chosen", "rng-seed", |
| rng_seed, sizeof(rng_seed)); |
| |
| create_fdt_flash(s, memmap); |
| create_fdt_fw_cfg(s, memmap); |
| create_fdt_pmu(s); |
| } |
| |
| static inline DeviceState *gpex_pcie_init(MemoryRegion *sys_mem, |
| DeviceState *irqchip, |
| RISCVVirtState *s) |
| { |
| DeviceState *dev; |
| MemoryRegion *ecam_alias, *ecam_reg; |
| MemoryRegion *mmio_alias, *high_mmio_alias, *mmio_reg; |
| hwaddr ecam_base = s->memmap[VIRT_PCIE_ECAM].base; |
| hwaddr ecam_size = s->memmap[VIRT_PCIE_ECAM].size; |
| hwaddr mmio_base = s->memmap[VIRT_PCIE_MMIO].base; |
| hwaddr mmio_size = s->memmap[VIRT_PCIE_MMIO].size; |
| hwaddr high_mmio_base = virt_high_pcie_memmap.base; |
| hwaddr high_mmio_size = virt_high_pcie_memmap.size; |
| hwaddr pio_base = s->memmap[VIRT_PCIE_PIO].base; |
| hwaddr pio_size = s->memmap[VIRT_PCIE_PIO].size; |
| qemu_irq irq; |
| int i; |
| |
| dev = qdev_new(TYPE_GPEX_HOST); |
| |
| /* Set GPEX object properties for the virt machine */ |
| object_property_set_uint(OBJECT(GPEX_HOST(dev)), PCI_HOST_ECAM_BASE, |
| ecam_base, NULL); |
| object_property_set_int(OBJECT(GPEX_HOST(dev)), PCI_HOST_ECAM_SIZE, |
| ecam_size, NULL); |
| object_property_set_uint(OBJECT(GPEX_HOST(dev)), |
| PCI_HOST_BELOW_4G_MMIO_BASE, |
| mmio_base, NULL); |
| object_property_set_int(OBJECT(GPEX_HOST(dev)), PCI_HOST_BELOW_4G_MMIO_SIZE, |
| mmio_size, NULL); |
| object_property_set_uint(OBJECT(GPEX_HOST(dev)), |
| PCI_HOST_ABOVE_4G_MMIO_BASE, |
| high_mmio_base, NULL); |
| object_property_set_int(OBJECT(GPEX_HOST(dev)), PCI_HOST_ABOVE_4G_MMIO_SIZE, |
| high_mmio_size, NULL); |
| object_property_set_uint(OBJECT(GPEX_HOST(dev)), PCI_HOST_PIO_BASE, |
| pio_base, NULL); |
| object_property_set_int(OBJECT(GPEX_HOST(dev)), PCI_HOST_PIO_SIZE, |
| pio_size, NULL); |
| |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); |
| |
| ecam_alias = g_new0(MemoryRegion, 1); |
| ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0); |
| memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam", |
| ecam_reg, 0, ecam_size); |
| memory_region_add_subregion(get_system_memory(), ecam_base, ecam_alias); |
| |
| mmio_alias = g_new0(MemoryRegion, 1); |
| mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1); |
| memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio", |
| mmio_reg, mmio_base, mmio_size); |
| memory_region_add_subregion(get_system_memory(), mmio_base, mmio_alias); |
| |
| /* Map high MMIO space */ |
| high_mmio_alias = g_new0(MemoryRegion, 1); |
| memory_region_init_alias(high_mmio_alias, OBJECT(dev), "pcie-mmio-high", |
| mmio_reg, high_mmio_base, high_mmio_size); |
| memory_region_add_subregion(get_system_memory(), high_mmio_base, |
| high_mmio_alias); |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, pio_base); |
| |
| for (i = 0; i < GPEX_NUM_IRQS; i++) { |
| irq = qdev_get_gpio_in(irqchip, PCIE_IRQ + i); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq); |
| gpex_set_irq_num(GPEX_HOST(dev), i, PCIE_IRQ + i); |
| } |
| |
| GPEX_HOST(dev)->gpex_cfg.bus = PCI_HOST_BRIDGE(GPEX_HOST(dev))->bus; |
| return dev; |
| } |
| |
| static FWCfgState *create_fw_cfg(const MachineState *ms) |
| { |
| hwaddr base = virt_memmap[VIRT_FW_CFG].base; |
| FWCfgState *fw_cfg; |
| |
| fw_cfg = fw_cfg_init_mem_wide(base + 8, base, 8, base + 16, |
| &address_space_memory); |
| fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)ms->smp.cpus); |
| |
| return fw_cfg; |
| } |
| |
| static DeviceState *virt_create_plic(const MemMapEntry *memmap, int socket, |
| int base_hartid, int hart_count) |
| { |
| DeviceState *ret; |
| g_autofree char *plic_hart_config = NULL; |
| |
| /* Per-socket PLIC hart topology configuration string */ |
| plic_hart_config = riscv_plic_hart_config_string(hart_count); |
| |
| /* Per-socket PLIC */ |
| ret = sifive_plic_create( |
| memmap[VIRT_PLIC].base + socket * memmap[VIRT_PLIC].size, |
| plic_hart_config, hart_count, base_hartid, |
| VIRT_IRQCHIP_NUM_SOURCES, |
| ((1U << VIRT_IRQCHIP_NUM_PRIO_BITS) - 1), |
| VIRT_PLIC_PRIORITY_BASE, |
| VIRT_PLIC_PENDING_BASE, |
| VIRT_PLIC_ENABLE_BASE, |
| VIRT_PLIC_ENABLE_STRIDE, |
| VIRT_PLIC_CONTEXT_BASE, |
| VIRT_PLIC_CONTEXT_STRIDE, |
| memmap[VIRT_PLIC].size); |
| |
| return ret; |
| } |
| |
| static DeviceState *virt_create_aia(RISCVVirtAIAType aia_type, int aia_guests, |
| const MemMapEntry *memmap, int socket, |
| int base_hartid, int hart_count) |
| { |
| int i; |
| hwaddr addr; |
| uint32_t guest_bits; |
| DeviceState *aplic_s = NULL; |
| DeviceState *aplic_m = NULL; |
| bool msimode = aia_type == VIRT_AIA_TYPE_APLIC_IMSIC; |
| |
| if (msimode) { |
| if (!kvm_enabled()) { |
| /* Per-socket M-level IMSICs */ |
| addr = memmap[VIRT_IMSIC_M].base + |
| socket * VIRT_IMSIC_GROUP_MAX_SIZE; |
| for (i = 0; i < hart_count; i++) { |
| riscv_imsic_create(addr + i * IMSIC_HART_SIZE(0), |
| base_hartid + i, true, 1, |
| VIRT_IRQCHIP_NUM_MSIS); |
| } |
| } |
| |
| /* Per-socket S-level IMSICs */ |
| guest_bits = imsic_num_bits(aia_guests + 1); |
| addr = memmap[VIRT_IMSIC_S].base + socket * VIRT_IMSIC_GROUP_MAX_SIZE; |
| for (i = 0; i < hart_count; i++) { |
| riscv_imsic_create(addr + i * IMSIC_HART_SIZE(guest_bits), |
| base_hartid + i, false, 1 + aia_guests, |
| VIRT_IRQCHIP_NUM_MSIS); |
| } |
| } |
| |
| if (!kvm_enabled()) { |
| /* Per-socket M-level APLIC */ |
| aplic_m = riscv_aplic_create(memmap[VIRT_APLIC_M].base + |
| socket * memmap[VIRT_APLIC_M].size, |
| memmap[VIRT_APLIC_M].size, |
| (msimode) ? 0 : base_hartid, |
| (msimode) ? 0 : hart_count, |
| VIRT_IRQCHIP_NUM_SOURCES, |
| VIRT_IRQCHIP_NUM_PRIO_BITS, |
| msimode, true, NULL); |
| } |
| |
| /* Per-socket S-level APLIC */ |
| aplic_s = riscv_aplic_create(memmap[VIRT_APLIC_S].base + |
| socket * memmap[VIRT_APLIC_S].size, |
| memmap[VIRT_APLIC_S].size, |
| (msimode) ? 0 : base_hartid, |
| (msimode) ? 0 : hart_count, |
| VIRT_IRQCHIP_NUM_SOURCES, |
| VIRT_IRQCHIP_NUM_PRIO_BITS, |
| msimode, false, aplic_m); |
| |
| return kvm_enabled() ? aplic_s : aplic_m; |
| } |
| |
| static void create_platform_bus(RISCVVirtState *s, DeviceState *irqchip) |
| { |
| DeviceState *dev; |
| SysBusDevice *sysbus; |
| const MemMapEntry *memmap = virt_memmap; |
| int i; |
| MemoryRegion *sysmem = get_system_memory(); |
| |
| dev = qdev_new(TYPE_PLATFORM_BUS_DEVICE); |
| dev->id = g_strdup(TYPE_PLATFORM_BUS_DEVICE); |
| qdev_prop_set_uint32(dev, "num_irqs", VIRT_PLATFORM_BUS_NUM_IRQS); |
| qdev_prop_set_uint32(dev, "mmio_size", memmap[VIRT_PLATFORM_BUS].size); |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); |
| s->platform_bus_dev = dev; |
| |
| sysbus = SYS_BUS_DEVICE(dev); |
| for (i = 0; i < VIRT_PLATFORM_BUS_NUM_IRQS; i++) { |
| int irq = VIRT_PLATFORM_BUS_IRQ + i; |
| sysbus_connect_irq(sysbus, i, qdev_get_gpio_in(irqchip, irq)); |
| } |
| |
| memory_region_add_subregion(sysmem, |
| memmap[VIRT_PLATFORM_BUS].base, |
| sysbus_mmio_get_region(sysbus, 0)); |
| } |
| |
| static void virt_build_smbios(RISCVVirtState *s) |
| { |
| MachineClass *mc = MACHINE_GET_CLASS(s); |
| MachineState *ms = MACHINE(s); |
| uint8_t *smbios_tables, *smbios_anchor; |
| size_t smbios_tables_len, smbios_anchor_len; |
| struct smbios_phys_mem_area mem_array; |
| const char *product = "QEMU Virtual Machine"; |
| |
| if (kvm_enabled()) { |
| product = "KVM Virtual Machine"; |
| } |
| |
| smbios_set_defaults("QEMU", product, mc->name); |
| |
| if (riscv_is_32bit(&s->soc[0])) { |
| smbios_set_default_processor_family(0x200); |
| } else { |
| smbios_set_default_processor_family(0x201); |
| } |
| |
| /* build the array of physical mem area from base_memmap */ |
| mem_array.address = s->memmap[VIRT_DRAM].base; |
| mem_array.length = ms->ram_size; |
| |
| smbios_get_tables(ms, SMBIOS_ENTRY_POINT_TYPE_64, |
| &mem_array, 1, |
| &smbios_tables, &smbios_tables_len, |
| &smbios_anchor, &smbios_anchor_len, |
| &error_fatal); |
| |
| if (smbios_anchor) { |
| fw_cfg_add_file(s->fw_cfg, "etc/smbios/smbios-tables", |
| smbios_tables, smbios_tables_len); |
| fw_cfg_add_file(s->fw_cfg, "etc/smbios/smbios-anchor", |
| smbios_anchor, smbios_anchor_len); |
| } |
| } |
| |
| static void virt_machine_done(Notifier *notifier, void *data) |
| { |
| RISCVVirtState *s = container_of(notifier, RISCVVirtState, |
| machine_done); |
| const MemMapEntry *memmap = virt_memmap; |
| MachineState *machine = MACHINE(s); |
| target_ulong start_addr = memmap[VIRT_DRAM].base; |
| target_ulong firmware_end_addr, kernel_start_addr; |
| const char *firmware_name = riscv_default_firmware_name(&s->soc[0]); |
| uint64_t fdt_load_addr; |
| uint64_t kernel_entry = 0; |
| BlockBackend *pflash_blk0; |
| |
| /* |
| * An user provided dtb must include everything, including |
| * dynamic sysbus devices. Our FDT needs to be finalized. |
| */ |
| if (machine->dtb == NULL) { |
| finalize_fdt(s); |
| } |
| |
| /* |
| * Only direct boot kernel is currently supported for KVM VM, |
| * so the "-bios" parameter is not supported when KVM is enabled. |
| */ |
| if (kvm_enabled()) { |
| if (machine->firmware) { |
| if (strcmp(machine->firmware, "none")) { |
| error_report("Machine mode firmware is not supported in " |
| "combination with KVM."); |
| exit(1); |
| } |
| } else { |
| machine->firmware = g_strdup("none"); |
| } |
| } |
| |
| firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name, |
| start_addr, NULL); |
| |
| pflash_blk0 = pflash_cfi01_get_blk(s->flash[0]); |
| if (pflash_blk0) { |
| if (machine->firmware && !strcmp(machine->firmware, "none") && |
| !kvm_enabled()) { |
| /* |
| * Pflash was supplied but bios is none and not KVM guest, |
| * let's overwrite the address we jump to after reset to |
| * the base of the flash. |
| */ |
| start_addr = virt_memmap[VIRT_FLASH].base; |
| } else { |
| /* |
| * Pflash was supplied but either KVM guest or bios is not none. |
| * In this case, base of the flash would contain S-mode payload. |
| */ |
| riscv_setup_firmware_boot(machine); |
| kernel_entry = virt_memmap[VIRT_FLASH].base; |
| } |
| } |
| |
| if (machine->kernel_filename && !kernel_entry) { |
| kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc[0], |
| firmware_end_addr); |
| |
| kernel_entry = riscv_load_kernel(machine, &s->soc[0], |
| kernel_start_addr, true, NULL); |
| } |
| |
| fdt_load_addr = riscv_compute_fdt_addr(memmap[VIRT_DRAM].base, |
| memmap[VIRT_DRAM].size, |
| machine); |
| riscv_load_fdt(fdt_load_addr, machine->fdt); |
| |
| /* load the reset vector */ |
| riscv_setup_rom_reset_vec(machine, &s->soc[0], start_addr, |
| virt_memmap[VIRT_MROM].base, |
| virt_memmap[VIRT_MROM].size, kernel_entry, |
| fdt_load_addr); |
| |
| /* |
| * Only direct boot kernel is currently supported for KVM VM, |
| * So here setup kernel start address and fdt address. |
| * TODO:Support firmware loading and integrate to TCG start |
| */ |
| if (kvm_enabled()) { |
| riscv_setup_direct_kernel(kernel_entry, fdt_load_addr); |
| } |
| |
| virt_build_smbios(s); |
| |
| if (virt_is_acpi_enabled(s)) { |
| virt_acpi_setup(s); |
| } |
| } |
| |
| static void virt_machine_init(MachineState *machine) |
| { |
| const MemMapEntry *memmap = virt_memmap; |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(machine); |
| MemoryRegion *system_memory = get_system_memory(); |
| MemoryRegion *mask_rom = g_new(MemoryRegion, 1); |
| DeviceState *mmio_irqchip, *virtio_irqchip, *pcie_irqchip; |
| int i, base_hartid, hart_count; |
| int socket_count = riscv_socket_count(machine); |
| |
| /* Check socket count limit */ |
| if (VIRT_SOCKETS_MAX < socket_count) { |
| error_report("number of sockets/nodes should be less than %d", |
| VIRT_SOCKETS_MAX); |
| exit(1); |
| } |
| |
| if (!virt_aclint_allowed() && s->have_aclint) { |
| error_report("'aclint' is only available with TCG acceleration"); |
| exit(1); |
| } |
| |
| /* Initialize sockets */ |
| mmio_irqchip = virtio_irqchip = pcie_irqchip = NULL; |
| for (i = 0; i < socket_count; i++) { |
| g_autofree char *soc_name = g_strdup_printf("soc%d", i); |
| |
| if (!riscv_socket_check_hartids(machine, i)) { |
| error_report("discontinuous hartids in socket%d", i); |
| exit(1); |
| } |
| |
| base_hartid = riscv_socket_first_hartid(machine, i); |
| if (base_hartid < 0) { |
| error_report("can't find hartid base for socket%d", i); |
| exit(1); |
| } |
| |
| hart_count = riscv_socket_hart_count(machine, i); |
| if (hart_count < 0) { |
| error_report("can't find hart count for socket%d", i); |
| exit(1); |
| } |
| |
| object_initialize_child(OBJECT(machine), soc_name, &s->soc[i], |
| TYPE_RISCV_HART_ARRAY); |
| object_property_set_str(OBJECT(&s->soc[i]), "cpu-type", |
| machine->cpu_type, &error_abort); |
| object_property_set_int(OBJECT(&s->soc[i]), "hartid-base", |
| base_hartid, &error_abort); |
| object_property_set_int(OBJECT(&s->soc[i]), "num-harts", |
| hart_count, &error_abort); |
| sysbus_realize(SYS_BUS_DEVICE(&s->soc[i]), &error_fatal); |
| |
| if (virt_aclint_allowed() && s->have_aclint) { |
| if (s->aia_type == VIRT_AIA_TYPE_APLIC_IMSIC) { |
| /* Per-socket ACLINT MTIMER */ |
| riscv_aclint_mtimer_create(memmap[VIRT_CLINT].base + |
| i * RISCV_ACLINT_DEFAULT_MTIMER_SIZE, |
| RISCV_ACLINT_DEFAULT_MTIMER_SIZE, |
| base_hartid, hart_count, |
| RISCV_ACLINT_DEFAULT_MTIMECMP, |
| RISCV_ACLINT_DEFAULT_MTIME, |
| RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, true); |
| } else { |
| /* Per-socket ACLINT MSWI, MTIMER, and SSWI */ |
| riscv_aclint_swi_create(memmap[VIRT_CLINT].base + |
| i * memmap[VIRT_CLINT].size, |
| base_hartid, hart_count, false); |
| riscv_aclint_mtimer_create(memmap[VIRT_CLINT].base + |
| i * memmap[VIRT_CLINT].size + |
| RISCV_ACLINT_SWI_SIZE, |
| RISCV_ACLINT_DEFAULT_MTIMER_SIZE, |
| base_hartid, hart_count, |
| RISCV_ACLINT_DEFAULT_MTIMECMP, |
| RISCV_ACLINT_DEFAULT_MTIME, |
| RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, true); |
| riscv_aclint_swi_create(memmap[VIRT_ACLINT_SSWI].base + |
| i * memmap[VIRT_ACLINT_SSWI].size, |
| base_hartid, hart_count, true); |
| } |
| } else if (tcg_enabled()) { |
| /* Per-socket SiFive CLINT */ |
| riscv_aclint_swi_create( |
| memmap[VIRT_CLINT].base + i * memmap[VIRT_CLINT].size, |
| base_hartid, hart_count, false); |
| riscv_aclint_mtimer_create(memmap[VIRT_CLINT].base + |
| i * memmap[VIRT_CLINT].size + RISCV_ACLINT_SWI_SIZE, |
| RISCV_ACLINT_DEFAULT_MTIMER_SIZE, base_hartid, hart_count, |
| RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME, |
| RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, true); |
| } |
| |
| /* Per-socket interrupt controller */ |
| if (s->aia_type == VIRT_AIA_TYPE_NONE) { |
| s->irqchip[i] = virt_create_plic(memmap, i, |
| base_hartid, hart_count); |
| } else { |
| s->irqchip[i] = virt_create_aia(s->aia_type, s->aia_guests, |
| memmap, i, base_hartid, |
| hart_count); |
| } |
| |
| /* Try to use different IRQCHIP instance based device type */ |
| if (i == 0) { |
| mmio_irqchip = s->irqchip[i]; |
| virtio_irqchip = s->irqchip[i]; |
| pcie_irqchip = s->irqchip[i]; |
| } |
| if (i == 1) { |
| virtio_irqchip = s->irqchip[i]; |
| pcie_irqchip = s->irqchip[i]; |
| } |
| if (i == 2) { |
| pcie_irqchip = s->irqchip[i]; |
| } |
| } |
| |
| if (kvm_enabled() && virt_use_kvm_aia(s)) { |
| kvm_riscv_aia_create(machine, IMSIC_MMIO_GROUP_MIN_SHIFT, |
| VIRT_IRQCHIP_NUM_SOURCES, VIRT_IRQCHIP_NUM_MSIS, |
| memmap[VIRT_APLIC_S].base, |
| memmap[VIRT_IMSIC_S].base, |
| s->aia_guests); |
| } |
| |
| if (riscv_is_32bit(&s->soc[0])) { |
| #if HOST_LONG_BITS == 64 |
| /* limit RAM size in a 32-bit system */ |
| if (machine->ram_size > 10 * GiB) { |
| machine->ram_size = 10 * GiB; |
| error_report("Limiting RAM size to 10 GiB"); |
| } |
| #endif |
| virt_high_pcie_memmap.base = VIRT32_HIGH_PCIE_MMIO_BASE; |
| virt_high_pcie_memmap.size = VIRT32_HIGH_PCIE_MMIO_SIZE; |
| } else { |
| virt_high_pcie_memmap.size = VIRT64_HIGH_PCIE_MMIO_SIZE; |
| virt_high_pcie_memmap.base = memmap[VIRT_DRAM].base + machine->ram_size; |
| virt_high_pcie_memmap.base = |
| ROUND_UP(virt_high_pcie_memmap.base, virt_high_pcie_memmap.size); |
| } |
| |
| s->memmap = virt_memmap; |
| |
| /* register system main memory (actual RAM) */ |
| memory_region_add_subregion(system_memory, memmap[VIRT_DRAM].base, |
| machine->ram); |
| |
| /* boot rom */ |
| memory_region_init_rom(mask_rom, NULL, "riscv_virt_board.mrom", |
| memmap[VIRT_MROM].size, &error_fatal); |
| memory_region_add_subregion(system_memory, memmap[VIRT_MROM].base, |
| mask_rom); |
| |
| /* |
| * Init fw_cfg. Must be done before riscv_load_fdt, otherwise the |
| * device tree cannot be altered and we get FDT_ERR_NOSPACE. |
| */ |
| s->fw_cfg = create_fw_cfg(machine); |
| rom_set_fw(s->fw_cfg); |
| |
| /* SiFive Test MMIO device */ |
| sifive_test_create(memmap[VIRT_TEST].base); |
| |
| /* VirtIO MMIO devices */ |
| for (i = 0; i < VIRTIO_COUNT; i++) { |
| sysbus_create_simple("virtio-mmio", |
| memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size, |
| qdev_get_gpio_in(virtio_irqchip, VIRTIO_IRQ + i)); |
| } |
| |
| gpex_pcie_init(system_memory, pcie_irqchip, s); |
| |
| create_platform_bus(s, mmio_irqchip); |
| |
| serial_mm_init(system_memory, memmap[VIRT_UART0].base, |
| 0, qdev_get_gpio_in(mmio_irqchip, UART0_IRQ), 399193, |
| serial_hd(0), DEVICE_LITTLE_ENDIAN); |
| |
| sysbus_create_simple("goldfish_rtc", memmap[VIRT_RTC].base, |
| qdev_get_gpio_in(mmio_irqchip, RTC_IRQ)); |
| |
| for (i = 0; i < ARRAY_SIZE(s->flash); i++) { |
| /* Map legacy -drive if=pflash to machine properties */ |
| pflash_cfi01_legacy_drive(s->flash[i], |
| drive_get(IF_PFLASH, 0, i)); |
| } |
| virt_flash_map(s, system_memory); |
| |
| /* load/create device tree */ |
| if (machine->dtb) { |
| machine->fdt = load_device_tree(machine->dtb, &s->fdt_size); |
| if (!machine->fdt) { |
| error_report("load_device_tree() failed"); |
| exit(1); |
| } |
| } else { |
| create_fdt(s, memmap); |
| } |
| |
| s->machine_done.notify = virt_machine_done; |
| qemu_add_machine_init_done_notifier(&s->machine_done); |
| } |
| |
| static void virt_machine_instance_init(Object *obj) |
| { |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(obj); |
| |
| virt_flash_create(s); |
| |
| s->oem_id = g_strndup(ACPI_BUILD_APPNAME6, 6); |
| s->oem_table_id = g_strndup(ACPI_BUILD_APPNAME8, 8); |
| s->acpi = ON_OFF_AUTO_AUTO; |
| } |
| |
| static char *virt_get_aia_guests(Object *obj, Error **errp) |
| { |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(obj); |
| |
| return g_strdup_printf("%d", s->aia_guests); |
| } |
| |
| static void virt_set_aia_guests(Object *obj, const char *val, Error **errp) |
| { |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(obj); |
| |
| s->aia_guests = atoi(val); |
| if (s->aia_guests < 0 || s->aia_guests > VIRT_IRQCHIP_MAX_GUESTS) { |
| error_setg(errp, "Invalid number of AIA IMSIC guests"); |
| error_append_hint(errp, "Valid values be between 0 and %d.\n", |
| VIRT_IRQCHIP_MAX_GUESTS); |
| } |
| } |
| |
| static char *virt_get_aia(Object *obj, Error **errp) |
| { |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(obj); |
| const char *val; |
| |
| switch (s->aia_type) { |
| case VIRT_AIA_TYPE_APLIC: |
| val = "aplic"; |
| break; |
| case VIRT_AIA_TYPE_APLIC_IMSIC: |
| val = "aplic-imsic"; |
| break; |
| default: |
| val = "none"; |
| break; |
| }; |
| |
| return g_strdup(val); |
| } |
| |
| static void virt_set_aia(Object *obj, const char *val, Error **errp) |
| { |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(obj); |
| |
| if (!strcmp(val, "none")) { |
| s->aia_type = VIRT_AIA_TYPE_NONE; |
| } else if (!strcmp(val, "aplic")) { |
| s->aia_type = VIRT_AIA_TYPE_APLIC; |
| } else if (!strcmp(val, "aplic-imsic")) { |
| s->aia_type = VIRT_AIA_TYPE_APLIC_IMSIC; |
| } else { |
| error_setg(errp, "Invalid AIA interrupt controller type"); |
| error_append_hint(errp, "Valid values are none, aplic, and " |
| "aplic-imsic.\n"); |
| } |
| } |
| |
| static bool virt_get_aclint(Object *obj, Error **errp) |
| { |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(obj); |
| |
| return s->have_aclint; |
| } |
| |
| static void virt_set_aclint(Object *obj, bool value, Error **errp) |
| { |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(obj); |
| |
| s->have_aclint = value; |
| } |
| |
| bool virt_is_acpi_enabled(RISCVVirtState *s) |
| { |
| return s->acpi != ON_OFF_AUTO_OFF; |
| } |
| |
| static void virt_get_acpi(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(obj); |
| OnOffAuto acpi = s->acpi; |
| |
| visit_type_OnOffAuto(v, name, &acpi, errp); |
| } |
| |
| static void virt_set_acpi(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(obj); |
| |
| visit_type_OnOffAuto(v, name, &s->acpi, errp); |
| } |
| |
| static HotplugHandler *virt_machine_get_hotplug_handler(MachineState *machine, |
| DeviceState *dev) |
| { |
| MachineClass *mc = MACHINE_GET_CLASS(machine); |
| |
| if (device_is_dynamic_sysbus(mc, dev) || |
| object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { |
| return HOTPLUG_HANDLER(machine); |
| } |
| return NULL; |
| } |
| |
| static void virt_machine_device_plug_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(hotplug_dev); |
| |
| if (s->platform_bus_dev) { |
| MachineClass *mc = MACHINE_GET_CLASS(s); |
| |
| if (device_is_dynamic_sysbus(mc, dev)) { |
| platform_bus_link_device(PLATFORM_BUS_DEVICE(s->platform_bus_dev), |
| SYS_BUS_DEVICE(dev)); |
| } |
| } |
| |
| if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { |
| create_fdt_virtio_iommu(s, pci_get_bdf(PCI_DEVICE(dev))); |
| } |
| } |
| |
| static void virt_machine_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc); |
| |
| mc->desc = "RISC-V VirtIO board"; |
| mc->init = virt_machine_init; |
| mc->max_cpus = VIRT_CPUS_MAX; |
| mc->default_cpu_type = TYPE_RISCV_CPU_BASE; |
| mc->block_default_type = IF_VIRTIO; |
| mc->no_cdrom = 1; |
| mc->pci_allow_0_address = true; |
| mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids; |
| mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props; |
| mc->get_default_cpu_node_id = riscv_numa_get_default_cpu_node_id; |
| mc->numa_mem_supported = true; |
| /* platform instead of architectural choice */ |
| mc->cpu_cluster_has_numa_boundary = true; |
| mc->default_ram_id = "riscv_virt_board.ram"; |
| assert(!mc->get_hotplug_handler); |
| mc->get_hotplug_handler = virt_machine_get_hotplug_handler; |
| |
| hc->plug = virt_machine_device_plug_cb; |
| |
| machine_class_allow_dynamic_sysbus_dev(mc, TYPE_RAMFB_DEVICE); |
| #ifdef CONFIG_TPM |
| machine_class_allow_dynamic_sysbus_dev(mc, TYPE_TPM_TIS_SYSBUS); |
| #endif |
| |
| object_class_property_add_bool(oc, "aclint", virt_get_aclint, |
| virt_set_aclint); |
| object_class_property_set_description(oc, "aclint", |
| "(TCG only) Set on/off to " |
| "enable/disable emulating " |
| "ACLINT devices"); |
| |
| object_class_property_add_str(oc, "aia", virt_get_aia, |
| virt_set_aia); |
| object_class_property_set_description(oc, "aia", |
| "Set type of AIA interrupt " |
| "controller. Valid values are " |
| "none, aplic, and aplic-imsic."); |
| |
| object_class_property_add_str(oc, "aia-guests", |
| virt_get_aia_guests, |
| virt_set_aia_guests); |
| { |
| g_autofree char *str = |
| g_strdup_printf("Set number of guest MMIO pages for AIA IMSIC. " |
| "Valid value should be between 0 and %d.", |
| VIRT_IRQCHIP_MAX_GUESTS); |
| object_class_property_set_description(oc, "aia-guests", str); |
| } |
| |
| object_class_property_add(oc, "acpi", "OnOffAuto", |
| virt_get_acpi, virt_set_acpi, |
| NULL, NULL); |
| object_class_property_set_description(oc, "acpi", |
| "Enable ACPI"); |
| } |
| |
| static const TypeInfo virt_machine_typeinfo = { |
| .name = MACHINE_TYPE_NAME("virt"), |
| .parent = TYPE_MACHINE, |
| .class_init = virt_machine_class_init, |
| .instance_init = virt_machine_instance_init, |
| .instance_size = sizeof(RISCVVirtState), |
| .interfaces = (InterfaceInfo[]) { |
| { TYPE_HOTPLUG_HANDLER }, |
| { } |
| }, |
| }; |
| |
| static void virt_machine_init_register_types(void) |
| { |
| type_register_static(&virt_machine_typeinfo); |
| } |
| |
| type_init(virt_machine_init_register_types) |