blob: 7fc6787f690ae6c840398bc508d4d24d1ccb06f2 [file] [log] [blame]
/*
* QEMU model of the UART on the SiFive E300 and U500 series SOCs.
*
* Copyright (c) 2016 Stefan O'Rear
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/log.h"
#include "migration/vmstate.h"
#include "chardev/char.h"
#include "chardev/char-fe.h"
#include "hw/irq.h"
#include "hw/char/sifive_uart.h"
#include "hw/qdev-properties-system.h"
/*
* Not yet implemented:
*
* Transmit FIFO using "qemu/fifo8.h"
*/
/* Returns the state of the IP (interrupt pending) register */
static uint64_t sifive_uart_ip(SiFiveUARTState *s)
{
uint64_t ret = 0;
uint64_t txcnt = SIFIVE_UART_GET_TXCNT(s->txctrl);
uint64_t rxcnt = SIFIVE_UART_GET_RXCNT(s->rxctrl);
if (txcnt != 0) {
ret |= SIFIVE_UART_IP_TXWM;
}
if (s->rx_fifo_len > rxcnt) {
ret |= SIFIVE_UART_IP_RXWM;
}
return ret;
}
static void sifive_uart_update_irq(SiFiveUARTState *s)
{
int cond = 0;
if ((s->ie & SIFIVE_UART_IE_TXWM) ||
((s->ie & SIFIVE_UART_IE_RXWM) && s->rx_fifo_len)) {
cond = 1;
}
if (cond) {
qemu_irq_raise(s->irq);
} else {
qemu_irq_lower(s->irq);
}
}
static uint64_t
sifive_uart_read(void *opaque, hwaddr addr, unsigned int size)
{
SiFiveUARTState *s = opaque;
unsigned char r;
switch (addr) {
case SIFIVE_UART_RXFIFO:
if (s->rx_fifo_len) {
r = s->rx_fifo[0];
memmove(s->rx_fifo, s->rx_fifo + 1, s->rx_fifo_len - 1);
s->rx_fifo_len--;
qemu_chr_fe_accept_input(&s->chr);
sifive_uart_update_irq(s);
return r;
}
return 0x80000000;
case SIFIVE_UART_TXFIFO:
return 0; /* Should check tx fifo */
case SIFIVE_UART_IE:
return s->ie;
case SIFIVE_UART_IP:
return sifive_uart_ip(s);
case SIFIVE_UART_TXCTRL:
return s->txctrl;
case SIFIVE_UART_RXCTRL:
return s->rxctrl;
case SIFIVE_UART_DIV:
return s->div;
}
qemu_log_mask(LOG_GUEST_ERROR, "%s: bad read: addr=0x%x\n",
__func__, (int)addr);
return 0;
}
static void
sifive_uart_write(void *opaque, hwaddr addr,
uint64_t val64, unsigned int size)
{
SiFiveUARTState *s = opaque;
uint32_t value = val64;
unsigned char ch = value;
switch (addr) {
case SIFIVE_UART_TXFIFO:
qemu_chr_fe_write(&s->chr, &ch, 1);
sifive_uart_update_irq(s);
return;
case SIFIVE_UART_IE:
s->ie = val64;
sifive_uart_update_irq(s);
return;
case SIFIVE_UART_TXCTRL:
s->txctrl = val64;
return;
case SIFIVE_UART_RXCTRL:
s->rxctrl = val64;
return;
case SIFIVE_UART_DIV:
s->div = val64;
return;
}
qemu_log_mask(LOG_GUEST_ERROR, "%s: bad write: addr=0x%x v=0x%x\n",
__func__, (int)addr, (int)value);
}
static const MemoryRegionOps sifive_uart_ops = {
.read = sifive_uart_read,
.write = sifive_uart_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4
}
};
static void sifive_uart_rx(void *opaque, const uint8_t *buf, int size)
{
SiFiveUARTState *s = opaque;
/* Got a byte. */
if (s->rx_fifo_len >= sizeof(s->rx_fifo)) {
printf("WARNING: UART dropped char.\n");
return;
}
s->rx_fifo[s->rx_fifo_len++] = *buf;
sifive_uart_update_irq(s);
}
static int sifive_uart_can_rx(void *opaque)
{
SiFiveUARTState *s = opaque;
return s->rx_fifo_len < sizeof(s->rx_fifo);
}
static void sifive_uart_event(void *opaque, QEMUChrEvent event)
{
}
static int sifive_uart_be_change(void *opaque)
{
SiFiveUARTState *s = opaque;
qemu_chr_fe_set_handlers(&s->chr, sifive_uart_can_rx, sifive_uart_rx,
sifive_uart_event, sifive_uart_be_change, s,
NULL, true);
return 0;
}
static Property sifive_uart_properties[] = {
DEFINE_PROP_CHR("chardev", SiFiveUARTState, chr),
DEFINE_PROP_END_OF_LIST(),
};
static void sifive_uart_init(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
SiFiveUARTState *s = SIFIVE_UART(obj);
memory_region_init_io(&s->mmio, OBJECT(s), &sifive_uart_ops, s,
TYPE_SIFIVE_UART, SIFIVE_UART_MAX);
sysbus_init_mmio(sbd, &s->mmio);
sysbus_init_irq(sbd, &s->irq);
}
static void sifive_uart_realize(DeviceState *dev, Error **errp)
{
SiFiveUARTState *s = SIFIVE_UART(dev);
qemu_chr_fe_set_handlers(&s->chr, sifive_uart_can_rx, sifive_uart_rx,
sifive_uart_event, sifive_uart_be_change, s,
NULL, true);
}
static void sifive_uart_reset_enter(Object *obj, ResetType type)
{
SiFiveUARTState *s = SIFIVE_UART(obj);
s->ie = 0;
s->ip = 0;
s->txctrl = 0;
s->rxctrl = 0;
s->div = 0;
s->rx_fifo_len = 0;
}
static void sifive_uart_reset_hold(Object *obj, ResetType type)
{
SiFiveUARTState *s = SIFIVE_UART(obj);
qemu_irq_lower(s->irq);
}
static const VMStateDescription vmstate_sifive_uart = {
.name = TYPE_SIFIVE_UART,
.version_id = 1,
.minimum_version_id = 1,
.fields = (const VMStateField[]) {
VMSTATE_UINT8_ARRAY(rx_fifo, SiFiveUARTState,
SIFIVE_UART_RX_FIFO_SIZE),
VMSTATE_UINT8(rx_fifo_len, SiFiveUARTState),
VMSTATE_UINT32(ie, SiFiveUARTState),
VMSTATE_UINT32(ip, SiFiveUARTState),
VMSTATE_UINT32(txctrl, SiFiveUARTState),
VMSTATE_UINT32(rxctrl, SiFiveUARTState),
VMSTATE_UINT32(div, SiFiveUARTState),
VMSTATE_END_OF_LIST()
},
};
static void sifive_uart_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
ResettableClass *rc = RESETTABLE_CLASS(oc);
dc->realize = sifive_uart_realize;
dc->vmsd = &vmstate_sifive_uart;
rc->phases.enter = sifive_uart_reset_enter;
rc->phases.hold = sifive_uart_reset_hold;
device_class_set_props(dc, sifive_uart_properties);
set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
}
static const TypeInfo sifive_uart_info = {
.name = TYPE_SIFIVE_UART,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(SiFiveUARTState),
.instance_init = sifive_uart_init,
.class_init = sifive_uart_class_init,
};
static void sifive_uart_register_types(void)
{
type_register_static(&sifive_uart_info);
}
type_init(sifive_uart_register_types)
/*
* Create UART device.
*/
SiFiveUARTState *sifive_uart_create(MemoryRegion *address_space, hwaddr base,
Chardev *chr, qemu_irq irq)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_new("riscv.sifive.uart");
s = SYS_BUS_DEVICE(dev);
qdev_prop_set_chr(dev, "chardev", chr);
sysbus_realize_and_unref(s, &error_fatal);
memory_region_add_subregion(address_space, base,
sysbus_mmio_get_region(s, 0));
sysbus_connect_irq(s, 0, irq);
return SIFIVE_UART(dev);
}