| /* |
| * ARM Versatile Platform/Application Baseboard System emulation. |
| * |
| * Copyright (c) 2005-2007 CodeSourcery. |
| * Written by Paul Brook |
| * |
| * This code is licensed under the GPL. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "hw/sysbus.h" |
| #include "migration/vmstate.h" |
| #include "hw/arm/boot.h" |
| #include "hw/net/smc91c111.h" |
| #include "net/net.h" |
| #include "sysemu/sysemu.h" |
| #include "hw/pci/pci.h" |
| #include "hw/i2c/i2c.h" |
| #include "hw/i2c/arm_sbcon_i2c.h" |
| #include "hw/irq.h" |
| #include "hw/boards.h" |
| #include "hw/block/flash.h" |
| #include "qemu/error-report.h" |
| #include "hw/char/pl011.h" |
| #include "hw/sd/sd.h" |
| #include "qom/object.h" |
| #include "audio/audio.h" |
| #include "target/arm/cpu-qom.h" |
| |
| #define VERSATILE_FLASH_ADDR 0x34000000 |
| #define VERSATILE_FLASH_SIZE (64 * 1024 * 1024) |
| #define VERSATILE_FLASH_SECT_SIZE (256 * 1024) |
| |
| /* Primary interrupt controller. */ |
| |
| #define TYPE_VERSATILE_PB_SIC "versatilepb_sic" |
| OBJECT_DECLARE_SIMPLE_TYPE(vpb_sic_state, VERSATILE_PB_SIC) |
| |
| struct vpb_sic_state { |
| SysBusDevice parent_obj; |
| |
| MemoryRegion iomem; |
| uint32_t level; |
| uint32_t mask; |
| uint32_t pic_enable; |
| qemu_irq parent[32]; |
| int irq; |
| }; |
| |
| static const VMStateDescription vmstate_vpb_sic = { |
| .name = "versatilepb_sic", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_UINT32(level, vpb_sic_state), |
| VMSTATE_UINT32(mask, vpb_sic_state), |
| VMSTATE_UINT32(pic_enable, vpb_sic_state), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void vpb_sic_update(vpb_sic_state *s) |
| { |
| uint32_t flags; |
| |
| flags = s->level & s->mask; |
| qemu_set_irq(s->parent[s->irq], flags != 0); |
| } |
| |
| static void vpb_sic_update_pic(vpb_sic_state *s) |
| { |
| int i; |
| uint32_t mask; |
| |
| for (i = 21; i <= 30; i++) { |
| mask = 1u << i; |
| if (!(s->pic_enable & mask)) |
| continue; |
| qemu_set_irq(s->parent[i], (s->level & mask) != 0); |
| } |
| } |
| |
| static void vpb_sic_set_irq(void *opaque, int irq, int level) |
| { |
| vpb_sic_state *s = (vpb_sic_state *)opaque; |
| if (level) |
| s->level |= 1u << irq; |
| else |
| s->level &= ~(1u << irq); |
| if (s->pic_enable & (1u << irq)) |
| qemu_set_irq(s->parent[irq], level); |
| vpb_sic_update(s); |
| } |
| |
| static uint64_t vpb_sic_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| vpb_sic_state *s = (vpb_sic_state *)opaque; |
| |
| switch (offset >> 2) { |
| case 0: /* STATUS */ |
| return s->level & s->mask; |
| case 1: /* RAWSTAT */ |
| return s->level; |
| case 2: /* ENABLE */ |
| return s->mask; |
| case 4: /* SOFTINT */ |
| return s->level & 1; |
| case 8: /* PICENABLE */ |
| return s->pic_enable; |
| default: |
| printf ("vpb_sic_read: Bad register offset 0x%x\n", (int)offset); |
| return 0; |
| } |
| } |
| |
| static void vpb_sic_write(void *opaque, hwaddr offset, |
| uint64_t value, unsigned size) |
| { |
| vpb_sic_state *s = (vpb_sic_state *)opaque; |
| |
| switch (offset >> 2) { |
| case 2: /* ENSET */ |
| s->mask |= value; |
| break; |
| case 3: /* ENCLR */ |
| s->mask &= ~value; |
| break; |
| case 4: /* SOFTINTSET */ |
| if (value) |
| s->mask |= 1; |
| break; |
| case 5: /* SOFTINTCLR */ |
| if (value) |
| s->mask &= ~1u; |
| break; |
| case 8: /* PICENSET */ |
| s->pic_enable |= (value & 0x7fe00000); |
| vpb_sic_update_pic(s); |
| break; |
| case 9: /* PICENCLR */ |
| s->pic_enable &= ~value; |
| vpb_sic_update_pic(s); |
| break; |
| default: |
| printf ("vpb_sic_write: Bad register offset 0x%x\n", (int)offset); |
| return; |
| } |
| vpb_sic_update(s); |
| } |
| |
| static const MemoryRegionOps vpb_sic_ops = { |
| .read = vpb_sic_read, |
| .write = vpb_sic_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void vpb_sic_init(Object *obj) |
| { |
| DeviceState *dev = DEVICE(obj); |
| vpb_sic_state *s = VERSATILE_PB_SIC(obj); |
| SysBusDevice *sbd = SYS_BUS_DEVICE(obj); |
| int i; |
| |
| qdev_init_gpio_in(dev, vpb_sic_set_irq, 32); |
| for (i = 0; i < 32; i++) { |
| sysbus_init_irq(sbd, &s->parent[i]); |
| } |
| s->irq = 31; |
| memory_region_init_io(&s->iomem, obj, &vpb_sic_ops, s, |
| "vpb-sic", 0x1000); |
| sysbus_init_mmio(sbd, &s->iomem); |
| } |
| |
| /* Board init. */ |
| |
| /* The AB and PB boards both use the same core, just with different |
| peripherals and expansion busses. For now we emulate a subset of the |
| PB peripherals and just change the board ID. */ |
| |
| static struct arm_boot_info versatile_binfo; |
| |
| static void versatile_init(MachineState *machine, int board_id) |
| { |
| Object *cpuobj; |
| ARMCPU *cpu; |
| MemoryRegion *sysmem = get_system_memory(); |
| qemu_irq pic[32]; |
| qemu_irq sic[32]; |
| DeviceState *dev, *sysctl; |
| SysBusDevice *busdev; |
| DeviceState *pl041; |
| PCIBus *pci_bus; |
| NICInfo *nd; |
| I2CBus *i2c; |
| int n; |
| int done_smc = 0; |
| DriveInfo *dinfo; |
| |
| if (machine->ram_size > 0x10000000) { |
| /* Device starting at address 0x10000000, |
| * and memory cannot overlap with devices. |
| * Refuse to run rather than behaving very confusingly. |
| */ |
| error_report("versatilepb: memory size must not exceed 256MB"); |
| exit(1); |
| } |
| |
| cpuobj = object_new(machine->cpu_type); |
| |
| /* By default ARM1176 CPUs have EL3 enabled. This board does not |
| * currently support EL3 so the CPU EL3 property is disabled before |
| * realization. |
| */ |
| if (object_property_find(cpuobj, "has_el3")) { |
| object_property_set_bool(cpuobj, "has_el3", false, &error_fatal); |
| } |
| |
| qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); |
| |
| cpu = ARM_CPU(cpuobj); |
| |
| /* ??? RAM should repeat to fill physical memory space. */ |
| /* SDRAM at address zero. */ |
| memory_region_add_subregion(sysmem, 0, machine->ram); |
| |
| sysctl = qdev_new("realview_sysctl"); |
| qdev_prop_set_uint32(sysctl, "sys_id", 0x41007004); |
| qdev_prop_set_uint32(sysctl, "proc_id", 0x02000000); |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(sysctl), &error_fatal); |
| sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000); |
| |
| dev = sysbus_create_varargs("pl190", 0x10140000, |
| qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ), |
| qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ), |
| NULL); |
| for (n = 0; n < 32; n++) { |
| pic[n] = qdev_get_gpio_in(dev, n); |
| } |
| dev = sysbus_create_simple(TYPE_VERSATILE_PB_SIC, 0x10003000, NULL); |
| for (n = 0; n < 32; n++) { |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), n, pic[n]); |
| sic[n] = qdev_get_gpio_in(dev, n); |
| } |
| |
| sysbus_create_simple("pl050_keyboard", 0x10006000, sic[3]); |
| sysbus_create_simple("pl050_mouse", 0x10007000, sic[4]); |
| |
| dev = qdev_new("versatile_pci"); |
| busdev = SYS_BUS_DEVICE(dev); |
| sysbus_realize_and_unref(busdev, &error_fatal); |
| sysbus_mmio_map(busdev, 0, 0x10001000); /* PCI controller regs */ |
| sysbus_mmio_map(busdev, 1, 0x41000000); /* PCI self-config */ |
| sysbus_mmio_map(busdev, 2, 0x42000000); /* PCI config */ |
| sysbus_mmio_map(busdev, 3, 0x43000000); /* PCI I/O */ |
| sysbus_mmio_map(busdev, 4, 0x44000000); /* PCI memory window 1 */ |
| sysbus_mmio_map(busdev, 5, 0x50000000); /* PCI memory window 2 */ |
| sysbus_mmio_map(busdev, 6, 0x60000000); /* PCI memory window 3 */ |
| sysbus_connect_irq(busdev, 0, sic[27]); |
| sysbus_connect_irq(busdev, 1, sic[28]); |
| sysbus_connect_irq(busdev, 2, sic[29]); |
| sysbus_connect_irq(busdev, 3, sic[30]); |
| pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci"); |
| |
| for(n = 0; n < nb_nics; n++) { |
| nd = &nd_table[n]; |
| |
| if (!done_smc && (!nd->model || strcmp(nd->model, "smc91c111") == 0)) { |
| smc91c111_init(nd, 0x10010000, sic[25]); |
| done_smc = 1; |
| } else { |
| pci_nic_init_nofail(nd, pci_bus, "rtl8139", NULL); |
| } |
| } |
| if (machine_usb(machine)) { |
| pci_create_simple(pci_bus, -1, "pci-ohci"); |
| } |
| n = drive_get_max_bus(IF_SCSI); |
| while (n >= 0) { |
| dev = DEVICE(pci_create_simple(pci_bus, -1, "lsi53c895a")); |
| lsi53c8xx_handle_legacy_cmdline(dev); |
| n--; |
| } |
| |
| pl011_create(0x101f1000, pic[12], serial_hd(0)); |
| pl011_create(0x101f2000, pic[13], serial_hd(1)); |
| pl011_create(0x101f3000, pic[14], serial_hd(2)); |
| pl011_create(0x10009000, sic[6], serial_hd(3)); |
| |
| dev = qdev_new("pl080"); |
| object_property_set_link(OBJECT(dev), "downstream", OBJECT(sysmem), |
| &error_fatal); |
| busdev = SYS_BUS_DEVICE(dev); |
| sysbus_realize_and_unref(busdev, &error_fatal); |
| sysbus_mmio_map(busdev, 0, 0x10130000); |
| sysbus_connect_irq(busdev, 0, pic[17]); |
| |
| sysbus_create_simple("sp804", 0x101e2000, pic[4]); |
| sysbus_create_simple("sp804", 0x101e3000, pic[5]); |
| |
| sysbus_create_simple("pl061", 0x101e4000, pic[6]); |
| sysbus_create_simple("pl061", 0x101e5000, pic[7]); |
| sysbus_create_simple("pl061", 0x101e6000, pic[8]); |
| sysbus_create_simple("pl061", 0x101e7000, pic[9]); |
| |
| /* The versatile/PB actually has a modified Color LCD controller |
| that includes hardware cursor support from the PL111. */ |
| dev = sysbus_create_simple("pl110_versatile", 0x10120000, pic[16]); |
| /* Wire up the mux control signals from the SYS_CLCD register */ |
| qdev_connect_gpio_out(sysctl, 0, qdev_get_gpio_in(dev, 0)); |
| |
| dev = sysbus_create_varargs("pl181", 0x10005000, sic[22], sic[1], NULL); |
| dinfo = drive_get(IF_SD, 0, 0); |
| if (dinfo) { |
| DeviceState *card; |
| |
| card = qdev_new(TYPE_SD_CARD); |
| qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), |
| &error_fatal); |
| qdev_realize_and_unref(card, qdev_get_child_bus(dev, "sd-bus"), |
| &error_fatal); |
| } |
| |
| dev = sysbus_create_varargs("pl181", 0x1000b000, sic[23], sic[2], NULL); |
| dinfo = drive_get(IF_SD, 0, 1); |
| if (dinfo) { |
| DeviceState *card; |
| |
| card = qdev_new(TYPE_SD_CARD); |
| qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), |
| &error_fatal); |
| qdev_realize_and_unref(card, qdev_get_child_bus(dev, "sd-bus"), |
| &error_fatal); |
| } |
| |
| /* Add PL031 Real Time Clock. */ |
| sysbus_create_simple("pl031", 0x101e8000, pic[10]); |
| |
| dev = sysbus_create_simple(TYPE_ARM_SBCON_I2C, 0x10002000, NULL); |
| i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); |
| i2c_slave_create_simple(i2c, "ds1338", 0x68); |
| |
| /* Add PL041 AACI Interface to the LM4549 codec */ |
| pl041 = qdev_new("pl041"); |
| qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512); |
| if (machine->audiodev) { |
| qdev_prop_set_string(pl041, "audiodev", machine->audiodev); |
| } |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(pl041), &error_fatal); |
| sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, 0x10004000); |
| sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, sic[24]); |
| |
| /* Memory map for Versatile/PB: */ |
| /* 0x10000000 System registers. */ |
| /* 0x10001000 PCI controller config registers. */ |
| /* 0x10002000 Serial bus interface. */ |
| /* 0x10003000 Secondary interrupt controller. */ |
| /* 0x10004000 AACI (audio). */ |
| /* 0x10005000 MMCI0. */ |
| /* 0x10006000 KMI0 (keyboard). */ |
| /* 0x10007000 KMI1 (mouse). */ |
| /* 0x10008000 Character LCD Interface. */ |
| /* 0x10009000 UART3. */ |
| /* 0x1000a000 Smart card 1. */ |
| /* 0x1000b000 MMCI1. */ |
| /* 0x10010000 Ethernet. */ |
| /* 0x10020000 USB. */ |
| /* 0x10100000 SSMC. */ |
| /* 0x10110000 MPMC. */ |
| /* 0x10120000 CLCD Controller. */ |
| /* 0x10130000 DMA Controller. */ |
| /* 0x10140000 Vectored interrupt controller. */ |
| /* 0x101d0000 AHB Monitor Interface. */ |
| /* 0x101e0000 System Controller. */ |
| /* 0x101e1000 Watchdog Interface. */ |
| /* 0x101e2000 Timer 0/1. */ |
| /* 0x101e3000 Timer 2/3. */ |
| /* 0x101e4000 GPIO port 0. */ |
| /* 0x101e5000 GPIO port 1. */ |
| /* 0x101e6000 GPIO port 2. */ |
| /* 0x101e7000 GPIO port 3. */ |
| /* 0x101e8000 RTC. */ |
| /* 0x101f0000 Smart card 0. */ |
| /* 0x101f1000 UART0. */ |
| /* 0x101f2000 UART1. */ |
| /* 0x101f3000 UART2. */ |
| /* 0x101f4000 SSPI. */ |
| /* 0x34000000 NOR Flash */ |
| |
| dinfo = drive_get(IF_PFLASH, 0, 0); |
| pflash_cfi01_register(VERSATILE_FLASH_ADDR, "versatile.flash", |
| VERSATILE_FLASH_SIZE, |
| dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, |
| VERSATILE_FLASH_SECT_SIZE, |
| 4, 0x0089, 0x0018, 0x0000, 0x0, 0); |
| |
| versatile_binfo.ram_size = machine->ram_size; |
| versatile_binfo.board_id = board_id; |
| arm_load_kernel(cpu, machine, &versatile_binfo); |
| } |
| |
| static void vpb_init(MachineState *machine) |
| { |
| versatile_init(machine, 0x183); |
| } |
| |
| static void vab_init(MachineState *machine) |
| { |
| versatile_init(machine, 0x25e); |
| } |
| |
| static void versatilepb_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| |
| mc->desc = "ARM Versatile/PB (ARM926EJ-S)"; |
| mc->init = vpb_init; |
| mc->block_default_type = IF_SCSI; |
| mc->ignore_memory_transaction_failures = true; |
| mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm926"); |
| mc->default_ram_id = "versatile.ram"; |
| |
| machine_add_audiodev_property(mc); |
| } |
| |
| static const TypeInfo versatilepb_type = { |
| .name = MACHINE_TYPE_NAME("versatilepb"), |
| .parent = TYPE_MACHINE, |
| .class_init = versatilepb_class_init, |
| }; |
| |
| static void versatileab_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| |
| mc->desc = "ARM Versatile/AB (ARM926EJ-S)"; |
| mc->init = vab_init; |
| mc->block_default_type = IF_SCSI; |
| mc->ignore_memory_transaction_failures = true; |
| mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm926"); |
| mc->default_ram_id = "versatile.ram"; |
| |
| machine_add_audiodev_property(mc); |
| } |
| |
| static const TypeInfo versatileab_type = { |
| .name = MACHINE_TYPE_NAME("versatileab"), |
| .parent = TYPE_MACHINE, |
| .class_init = versatileab_class_init, |
| }; |
| |
| static void versatile_machine_init(void) |
| { |
| type_register_static(&versatilepb_type); |
| type_register_static(&versatileab_type); |
| } |
| |
| type_init(versatile_machine_init) |
| |
| static void vpb_sic_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->vmsd = &vmstate_vpb_sic; |
| } |
| |
| static const TypeInfo vpb_sic_info = { |
| .name = TYPE_VERSATILE_PB_SIC, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(vpb_sic_state), |
| .instance_init = vpb_sic_init, |
| .class_init = vpb_sic_class_init, |
| }; |
| |
| static void versatilepb_register_types(void) |
| { |
| type_register_static(&vpb_sic_info); |
| } |
| |
| type_init(versatilepb_register_types) |
