| /* |
| * S390 virtio-ccw loading program |
| * |
| * Copyright (c) 2013 Alexander Graf <agraf@suse.de> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or (at |
| * your option) any later version. See the COPYING file in the top-level |
| * directory. |
| */ |
| |
| #include "libc.h" |
| #include "helper.h" |
| #include "s390-arch.h" |
| #include "s390-ccw.h" |
| #include "cio.h" |
| #include "virtio.h" |
| #include "virtio-scsi.h" |
| #include "dasd-ipl.h" |
| |
| char stack[PAGE_SIZE * 8] __attribute__((__aligned__(PAGE_SIZE))); |
| static SubChannelId blk_schid = { .one = 1 }; |
| static char loadparm_str[LOADPARM_LEN + 1]; |
| QemuIplParameters qipl; |
| IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE))); |
| static bool have_iplb; |
| static uint16_t cutype; |
| LowCore *lowcore; /* Yes, this *is* a pointer to address 0 */ |
| |
| #define LOADPARM_PROMPT "PROMPT " |
| #define LOADPARM_EMPTY " " |
| #define BOOT_MENU_FLAG_MASK (QIPL_FLAG_BM_OPTS_CMD | QIPL_FLAG_BM_OPTS_ZIPL) |
| |
| /* |
| * Principles of Operations (SA22-7832-09) chapter 17 requires that |
| * a subsystem-identification is at 184-187 and bytes 188-191 are zero |
| * after list-directed-IPL and ccw-IPL. |
| */ |
| void write_subsystem_identification(void) |
| { |
| lowcore->subchannel_id = blk_schid.sch_id; |
| lowcore->subchannel_nr = blk_schid.sch_no; |
| lowcore->io_int_parm = 0; |
| } |
| |
| void write_iplb_location(void) |
| { |
| if (cutype == CU_TYPE_VIRTIO && virtio_get_device_type() != VIRTIO_ID_NET) { |
| lowcore->ptr_iplb = ptr2u32(&iplb); |
| } |
| } |
| |
| unsigned int get_loadparm_index(void) |
| { |
| return atoui(loadparm_str); |
| } |
| |
| static int is_dev_possibly_bootable(int dev_no, int sch_no) |
| { |
| bool is_virtio; |
| Schib schib; |
| int r; |
| |
| blk_schid.sch_no = sch_no; |
| r = stsch_err(blk_schid, &schib); |
| if (r == 3 || r == -EIO) { |
| return -ENODEV; |
| } |
| if (!schib.pmcw.dnv) { |
| return false; |
| } |
| |
| enable_subchannel(blk_schid); |
| cutype = cu_type(blk_schid); |
| |
| /* |
| * Note: we always have to run virtio_is_supported() here to make |
| * sure that the vdev.senseid data gets pre-initialized correctly |
| */ |
| is_virtio = virtio_is_supported(blk_schid); |
| |
| /* No specific devno given, just return whether the device is possibly bootable */ |
| if (dev_no < 0) { |
| switch (cutype) { |
| case CU_TYPE_VIRTIO: |
| if (is_virtio) { |
| /* |
| * Skip net devices since no IPLB is created and therefore |
| * no network bootloader has been loaded |
| */ |
| if (virtio_get_device_type() != VIRTIO_ID_NET) { |
| return true; |
| } |
| } |
| return false; |
| case CU_TYPE_DASD_3990: |
| case CU_TYPE_DASD_2107: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| /* Caller asked for a specific devno */ |
| if (schib.pmcw.dev == dev_no) { |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /* |
| * Find the subchannel connected to the given device (dev_no) and fill in the |
| * subchannel information block (schib) with the connected subchannel's info. |
| * NOTE: The global variable blk_schid is updated to contain the subchannel |
| * information. |
| * |
| * If the caller gives dev_no=-1 then the user did not specify a boot device. |
| * In this case we'll just use the first potentially bootable device we find. |
| */ |
| static bool find_subch(int dev_no) |
| { |
| int i, r; |
| |
| for (i = 0; i < 0x10000; i++) { |
| r = is_dev_possibly_bootable(dev_no, i); |
| if (r < 0) { |
| break; |
| } |
| if (r == true) { |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static void menu_setup(void) |
| { |
| if (memcmp(loadparm_str, LOADPARM_PROMPT, LOADPARM_LEN) == 0) { |
| menu_set_parms(QIPL_FLAG_BM_OPTS_CMD, 0); |
| return; |
| } |
| |
| /* If loadparm was set to any other value, then do not enable menu */ |
| if (memcmp(loadparm_str, LOADPARM_EMPTY, LOADPARM_LEN) != 0) { |
| return; |
| } |
| |
| switch (iplb.pbt) { |
| case S390_IPL_TYPE_CCW: |
| case S390_IPL_TYPE_QEMU_SCSI: |
| menu_set_parms(qipl.qipl_flags & BOOT_MENU_FLAG_MASK, |
| qipl.boot_menu_timeout); |
| return; |
| } |
| } |
| |
| /* |
| * Initialize the channel I/O subsystem so we can talk to our ipl/boot device. |
| */ |
| static void css_setup(void) |
| { |
| /* |
| * Unconditionally enable mss support. In every sane configuration this |
| * will succeed; and even if it doesn't, stsch_err() can handle it. |
| */ |
| enable_mss_facility(); |
| } |
| |
| /* |
| * Collect various pieces of information from the hypervisor/hardware that |
| * we'll use to determine exactly how we'll boot. |
| */ |
| static void boot_setup(void) |
| { |
| char lpmsg[] = "LOADPARM=[________]\n"; |
| |
| sclp_get_loadparm_ascii(loadparm_str); |
| memcpy(lpmsg + 10, loadparm_str, 8); |
| sclp_print(lpmsg); |
| |
| /* |
| * Clear out any potential S390EP magic (see jump_to_low_kernel()), |
| * so we don't taint our decision-making process during a reboot. |
| */ |
| memset((char *)S390EP, 0, 6); |
| |
| have_iplb = store_iplb(&iplb); |
| } |
| |
| static void find_boot_device(void) |
| { |
| VDev *vdev = virtio_get_device(); |
| bool found; |
| |
| switch (iplb.pbt) { |
| case S390_IPL_TYPE_CCW: |
| debug_print_int("device no. ", iplb.ccw.devno); |
| blk_schid.ssid = iplb.ccw.ssid & 0x3; |
| debug_print_int("ssid ", blk_schid.ssid); |
| found = find_subch(iplb.ccw.devno); |
| break; |
| case S390_IPL_TYPE_QEMU_SCSI: |
| vdev->scsi_device_selected = true; |
| vdev->selected_scsi_device.channel = iplb.scsi.channel; |
| vdev->selected_scsi_device.target = iplb.scsi.target; |
| vdev->selected_scsi_device.lun = iplb.scsi.lun; |
| blk_schid.ssid = iplb.scsi.ssid & 0x3; |
| found = find_subch(iplb.scsi.devno); |
| break; |
| default: |
| panic("List-directed IPL not supported yet!\n"); |
| } |
| |
| IPL_assert(found, "Boot device not found\n"); |
| } |
| |
| static int virtio_setup(void) |
| { |
| VDev *vdev = virtio_get_device(); |
| QemuIplParameters *early_qipl = (QemuIplParameters *)QIPL_ADDRESS; |
| int ret; |
| |
| memcpy(&qipl, early_qipl, sizeof(QemuIplParameters)); |
| |
| if (have_iplb) { |
| menu_setup(); |
| } |
| |
| switch (vdev->senseid.cu_model) { |
| case VIRTIO_ID_NET: |
| sclp_print("Network boot device detected\n"); |
| vdev->netboot_start_addr = qipl.netboot_start_addr; |
| return 0; |
| case VIRTIO_ID_BLOCK: |
| ret = virtio_blk_setup_device(blk_schid); |
| break; |
| case VIRTIO_ID_SCSI: |
| ret = virtio_scsi_setup_device(blk_schid); |
| break; |
| default: |
| panic("\n! No IPL device available !\n"); |
| } |
| |
| if (!ret) { |
| IPL_assert(virtio_ipl_disk_is_valid(), "No valid IPL device detected"); |
| } |
| |
| return ret; |
| } |
| |
| static void ipl_boot_device(void) |
| { |
| switch (cutype) { |
| case CU_TYPE_DASD_3990: |
| case CU_TYPE_DASD_2107: |
| dasd_ipl(blk_schid, cutype); /* no return */ |
| break; |
| case CU_TYPE_VIRTIO: |
| if (virtio_setup() == 0) { |
| zipl_load(); /* Only returns in case of errors */ |
| } |
| break; |
| default: |
| print_int("Attempting to boot from unexpected device type", cutype); |
| panic("\nBoot failed.\n"); |
| } |
| } |
| |
| /* |
| * No boot device has been specified, so we have to scan through the |
| * channels to find one. |
| */ |
| static void probe_boot_device(void) |
| { |
| int ssid, sch_no, ret; |
| |
| for (ssid = 0; ssid < 0x3; ssid++) { |
| blk_schid.ssid = ssid; |
| for (sch_no = 0; sch_no < 0x10000; sch_no++) { |
| ret = is_dev_possibly_bootable(-1, sch_no); |
| if (ret < 0) { |
| break; |
| } |
| if (ret == true) { |
| ipl_boot_device(); /* Only returns if unsuccessful */ |
| } |
| } |
| } |
| |
| sclp_print("Could not find a suitable boot device (none specified)\n"); |
| } |
| |
| void main(void) |
| { |
| sclp_setup(); |
| css_setup(); |
| boot_setup(); |
| if (have_iplb) { |
| find_boot_device(); |
| ipl_boot_device(); |
| } else { |
| probe_boot_device(); |
| } |
| |
| panic("Failed to load OS from hard disk\n"); |
| } |
