| /* |
| * QEMU IPMI SMBus (SSIF) emulation |
| * |
| * Copyright (c) 2015,2016 Corey Minyard, MontaVista Software, LLC |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "qemu/osdep.h" |
| #include "migration/vmstate.h" |
| #include "hw/i2c/smbus_slave.h" |
| #include "qapi/error.h" |
| #include "qemu/error-report.h" |
| #include "hw/ipmi/ipmi.h" |
| #include "qom/object.h" |
| #include "hw/acpi/ipmi.h" |
| |
| #define TYPE_SMBUS_IPMI "smbus-ipmi" |
| OBJECT_DECLARE_SIMPLE_TYPE(SMBusIPMIDevice, SMBUS_IPMI) |
| |
| #define SSIF_IPMI_REQUEST 2 |
| #define SSIF_IPMI_MULTI_PART_REQUEST_START 6 |
| #define SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE 7 |
| #define SSIF_IPMI_MULTI_PART_REQUEST_END 8 |
| #define SSIF_IPMI_RESPONSE 3 |
| #define SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE 9 |
| #define SSIF_IPMI_MULTI_PART_RETRY 0xa |
| |
| #define MAX_SSIF_IPMI_MSG_SIZE 255 |
| #define MAX_SSIF_IPMI_MSG_CHUNK 32 |
| |
| #define IPMI_GET_SYS_INTF_CAP_CMD 0x57 |
| |
| struct SMBusIPMIDevice { |
| SMBusDevice parent; |
| |
| IPMIBmc *bmc; |
| |
| uint8_t outmsg[MAX_SSIF_IPMI_MSG_SIZE]; |
| uint32_t outlen; |
| uint32_t currblk; |
| |
| /* Holds the SMBUS message currently being sent to the host. */ |
| uint8_t outbuf[MAX_SSIF_IPMI_MSG_CHUNK + 1]; /* len + message. */ |
| uint32_t outpos; |
| |
| uint8_t inmsg[MAX_SSIF_IPMI_MSG_SIZE]; |
| uint32_t inlen; |
| |
| /* |
| * This is a response number that we send with the command to make |
| * sure that the response matches the command. |
| */ |
| uint8_t waiting_rsp; |
| |
| uint32_t uuid; |
| }; |
| |
| static void smbus_ipmi_handle_event(IPMIInterface *ii) |
| { |
| /* No interrupts, so nothing to do here. */ |
| } |
| |
| static void smbus_ipmi_handle_rsp(IPMIInterface *ii, uint8_t msg_id, |
| unsigned char *rsp, unsigned int rsp_len) |
| { |
| SMBusIPMIDevice *sid = SMBUS_IPMI(ii); |
| |
| if (sid->waiting_rsp == msg_id) { |
| sid->waiting_rsp++; |
| |
| if (rsp_len > MAX_SSIF_IPMI_MSG_SIZE) { |
| rsp[2] = IPMI_CC_REQUEST_DATA_TRUNCATED; |
| rsp_len = MAX_SSIF_IPMI_MSG_SIZE; |
| } |
| memcpy(sid->outmsg, rsp, rsp_len); |
| sid->outlen = rsp_len; |
| sid->outpos = 0; |
| sid->currblk = 0; |
| } |
| } |
| |
| static void smbus_ipmi_set_atn(IPMIInterface *ii, int val, int irq) |
| { |
| /* This is where PEC would go. */ |
| } |
| |
| static void smbus_ipmi_set_irq_enable(IPMIInterface *ii, int val) |
| { |
| } |
| |
| static void smbus_ipmi_send_msg(SMBusIPMIDevice *sid) |
| { |
| uint8_t *msg = sid->inmsg; |
| uint32_t len = sid->inlen; |
| IPMIBmcClass *bk = IPMI_BMC_GET_CLASS(sid->bmc); |
| |
| sid->outlen = 0; |
| sid->outpos = 0; |
| sid->currblk = 0; |
| |
| if (msg[0] == (IPMI_NETFN_APP << 2) && msg[1] == IPMI_GET_SYS_INTF_CAP_CMD) |
| { |
| /* We handle this ourself. */ |
| sid->outmsg[0] = (IPMI_NETFN_APP + 1) << 2; |
| sid->outmsg[1] = msg[1]; |
| if (len < 3) { |
| sid->outmsg[2] = IPMI_CC_REQUEST_DATA_LENGTH_INVALID; |
| sid->outlen = 3; |
| } else if ((msg[2] & 0x0f) != 0) { |
| sid->outmsg[2] = IPMI_CC_INVALID_DATA_FIELD; |
| sid->outlen = 3; |
| } else { |
| sid->outmsg[2] = 0; |
| sid->outmsg[3] = 0; |
| sid->outmsg[4] = (2 << 6); /* Multi-part supported. */ |
| sid->outmsg[5] = MAX_SSIF_IPMI_MSG_SIZE; |
| sid->outmsg[6] = MAX_SSIF_IPMI_MSG_SIZE; |
| sid->outlen = 7; |
| } |
| return; |
| } |
| |
| bk->handle_command(sid->bmc, sid->inmsg, sid->inlen, sizeof(sid->inmsg), |
| sid->waiting_rsp); |
| } |
| |
| static uint8_t ipmi_receive_byte(SMBusDevice *dev) |
| { |
| SMBusIPMIDevice *sid = SMBUS_IPMI(dev); |
| |
| if (sid->outpos >= sizeof(sid->outbuf)) { |
| return 0xff; |
| } |
| |
| return sid->outbuf[sid->outpos++]; |
| } |
| |
| static int ipmi_load_readbuf(SMBusIPMIDevice *sid) |
| { |
| unsigned int block = sid->currblk, pos, len; |
| |
| if (sid->outlen == 0) { |
| return -1; |
| } |
| |
| if (sid->outlen <= 32) { |
| if (block != 0) { |
| return -1; |
| } |
| sid->outbuf[0] = sid->outlen; |
| memcpy(sid->outbuf + 1, sid->outmsg, sid->outlen); |
| sid->outpos = 0; |
| return 0; |
| } |
| |
| if (block == 0) { |
| sid->outbuf[0] = 32; |
| sid->outbuf[1] = 0; |
| sid->outbuf[2] = 1; |
| memcpy(sid->outbuf + 3, sid->outmsg, 30); |
| sid->outpos = 0; |
| return 0; |
| } |
| |
| /* |
| * Calculate the position in outmsg. 30 for the first block, 31 |
| * for the rest of the blocks. |
| */ |
| pos = 30 + (block - 1) * 31; |
| |
| if (pos >= sid->outlen) { |
| return -1; |
| } |
| |
| len = sid->outlen - pos; |
| if (len > 31) { |
| /* More chunks after this. */ |
| len = 31; |
| /* Blocks start at 0 for the first middle transaction. */ |
| sid->outbuf[1] = block - 1; |
| } else { |
| sid->outbuf[1] = 0xff; /* End of message marker. */ |
| } |
| |
| sid->outbuf[0] = len + 1; |
| memcpy(sid->outbuf + 2, sid->outmsg + pos, len); |
| sid->outpos = 0; |
| return 0; |
| } |
| |
| static int ipmi_write_data(SMBusDevice *dev, uint8_t *buf, uint8_t len) |
| { |
| SMBusIPMIDevice *sid = SMBUS_IPMI(dev); |
| bool send = false; |
| uint8_t cmd; |
| int ret = 0; |
| |
| /* length is guaranteed to be >= 1. */ |
| cmd = *buf++; |
| len--; |
| |
| /* Handle read request, which don't have any data in the write part. */ |
| switch (cmd) { |
| case SSIF_IPMI_RESPONSE: |
| sid->currblk = 0; |
| ret = ipmi_load_readbuf(sid); |
| break; |
| |
| case SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE: |
| sid->currblk++; |
| ret = ipmi_load_readbuf(sid); |
| break; |
| |
| case SSIF_IPMI_MULTI_PART_RETRY: |
| if (len >= 1) { |
| sid->currblk = buf[0]; |
| ret = ipmi_load_readbuf(sid); |
| } else { |
| ret = -1; |
| } |
| break; |
| |
| default: |
| break; |
| } |
| |
| /* This should be a message write, make the length is there and correct. */ |
| if (len >= 1) { |
| if (*buf != len - 1 || *buf > MAX_SSIF_IPMI_MSG_CHUNK) { |
| return -1; /* Bogus message */ |
| } |
| buf++; |
| len--; |
| } |
| |
| switch (cmd) { |
| case SSIF_IPMI_REQUEST: |
| send = true; |
| /* FALLTHRU */ |
| case SSIF_IPMI_MULTI_PART_REQUEST_START: |
| if (len < 2) { |
| return -1; /* Bogus. */ |
| } |
| memcpy(sid->inmsg, buf, len); |
| sid->inlen = len; |
| break; |
| |
| case SSIF_IPMI_MULTI_PART_REQUEST_END: |
| send = true; |
| /* FALLTHRU */ |
| case SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE: |
| if (!sid->inlen) { |
| return -1; /* Bogus. */ |
| } |
| if (sid->inlen + len > MAX_SSIF_IPMI_MSG_SIZE) { |
| sid->inlen = 0; /* Discard the message. */ |
| return -1; /* Bogus. */ |
| } |
| if (len < 32) { |
| /* |
| * Special hack, a multi-part middle that is less than 32 bytes |
| * marks the end of a message. The specification is fairly |
| * confusing, so some systems to this, even sending a zero |
| * length end message to mark the end. |
| */ |
| send = true; |
| } |
| if (len > 0) { |
| memcpy(sid->inmsg + sid->inlen, buf, len); |
| } |
| sid->inlen += len; |
| break; |
| } |
| |
| if (send && sid->inlen) { |
| smbus_ipmi_send_msg(sid); |
| } |
| |
| return ret; |
| } |
| |
| static const VMStateDescription vmstate_smbus_ipmi = { |
| .name = TYPE_SMBUS_IPMI, |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_SMBUS_DEVICE(parent, SMBusIPMIDevice), |
| VMSTATE_UINT8(waiting_rsp, SMBusIPMIDevice), |
| VMSTATE_UINT32(outlen, SMBusIPMIDevice), |
| VMSTATE_UINT32(currblk, SMBusIPMIDevice), |
| VMSTATE_UINT8_ARRAY(outmsg, SMBusIPMIDevice, MAX_SSIF_IPMI_MSG_SIZE), |
| VMSTATE_UINT32(outpos, SMBusIPMIDevice), |
| VMSTATE_UINT8_ARRAY(outbuf, SMBusIPMIDevice, |
| MAX_SSIF_IPMI_MSG_CHUNK + 1), |
| VMSTATE_UINT32(inlen, SMBusIPMIDevice), |
| VMSTATE_UINT8_ARRAY(inmsg, SMBusIPMIDevice, MAX_SSIF_IPMI_MSG_SIZE), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void smbus_ipmi_realize(DeviceState *dev, Error **errp) |
| { |
| SMBusIPMIDevice *sid = SMBUS_IPMI(dev); |
| IPMIInterface *ii = IPMI_INTERFACE(dev); |
| |
| if (!sid->bmc) { |
| error_setg(errp, "IPMI device requires a bmc attribute to be set"); |
| return; |
| } |
| |
| sid->uuid = ipmi_next_uuid(); |
| |
| sid->bmc->intf = ii; |
| } |
| |
| static void smbus_ipmi_init(Object *obj) |
| { |
| SMBusIPMIDevice *sid = SMBUS_IPMI(obj); |
| |
| ipmi_bmc_find_and_link(obj, (Object **) &sid->bmc); |
| } |
| |
| static void smbus_ipmi_get_fwinfo(struct IPMIInterface *ii, IPMIFwInfo *info) |
| { |
| SMBusIPMIDevice *sid = SMBUS_IPMI(ii); |
| |
| info->interface_name = "smbus"; |
| info->interface_type = IPMI_SMBIOS_SSIF; |
| info->ipmi_spec_major_revision = 2; |
| info->ipmi_spec_minor_revision = 0; |
| info->i2c_slave_address = sid->bmc->slave_addr; |
| info->base_address = sid->parent.i2c.address; |
| info->memspace = IPMI_MEMSPACE_SMBUS; |
| info->register_spacing = 1; |
| info->uuid = sid->uuid; |
| } |
| |
| static void smbus_ipmi_class_init(ObjectClass *oc, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(oc); |
| IPMIInterfaceClass *iic = IPMI_INTERFACE_CLASS(oc); |
| SMBusDeviceClass *sc = SMBUS_DEVICE_CLASS(oc); |
| AcpiDevAmlIfClass *adevc = ACPI_DEV_AML_IF_CLASS(oc); |
| |
| sc->receive_byte = ipmi_receive_byte; |
| sc->write_data = ipmi_write_data; |
| dc->vmsd = &vmstate_smbus_ipmi; |
| dc->realize = smbus_ipmi_realize; |
| iic->set_atn = smbus_ipmi_set_atn; |
| iic->handle_rsp = smbus_ipmi_handle_rsp; |
| iic->handle_if_event = smbus_ipmi_handle_event; |
| iic->set_irq_enable = smbus_ipmi_set_irq_enable; |
| iic->get_fwinfo = smbus_ipmi_get_fwinfo; |
| adevc->build_dev_aml = build_ipmi_dev_aml; |
| } |
| |
| static const TypeInfo smbus_ipmi_info = { |
| .name = TYPE_SMBUS_IPMI, |
| .parent = TYPE_SMBUS_DEVICE, |
| .instance_size = sizeof(SMBusIPMIDevice), |
| .instance_init = smbus_ipmi_init, |
| .class_init = smbus_ipmi_class_init, |
| .interfaces = (InterfaceInfo[]) { |
| { TYPE_IPMI_INTERFACE }, |
| { TYPE_ACPI_DEV_AML_IF }, |
| { } |
| } |
| }; |
| |
| static void smbus_ipmi_register_types(void) |
| { |
| type_register_static(&smbus_ipmi_info); |
| } |
| |
| type_init(smbus_ipmi_register_types) |
