| /* |
| * Block model of System timer present in |
| * Microsemi's SmartFusion2 and SmartFusion SoCs. |
| * |
| * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com>. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/main-loop.h" |
| #include "qemu/module.h" |
| #include "qemu/log.h" |
| #include "hw/timer/mss-timer.h" |
| |
| #ifndef MSS_TIMER_ERR_DEBUG |
| #define MSS_TIMER_ERR_DEBUG 0 |
| #endif |
| |
| #define DB_PRINT_L(lvl, fmt, args...) do { \ |
| if (MSS_TIMER_ERR_DEBUG >= lvl) { \ |
| qemu_log("%s: " fmt "\n", __func__, ## args); \ |
| } \ |
| } while (0) |
| |
| #define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args) |
| |
| #define R_TIM_VAL 0 |
| #define R_TIM_LOADVAL 1 |
| #define R_TIM_BGLOADVAL 2 |
| #define R_TIM_CTRL 3 |
| #define R_TIM_RIS 4 |
| #define R_TIM_MIS 5 |
| |
| #define TIMER_CTRL_ENBL (1 << 0) |
| #define TIMER_CTRL_ONESHOT (1 << 1) |
| #define TIMER_CTRL_INTR (1 << 2) |
| #define TIMER_RIS_ACK (1 << 0) |
| #define TIMER_RST_CLR (1 << 6) |
| #define TIMER_MODE (1 << 0) |
| |
| static void timer_update_irq(struct Msf2Timer *st) |
| { |
| bool isr, ier; |
| |
| isr = !!(st->regs[R_TIM_RIS] & TIMER_RIS_ACK); |
| ier = !!(st->regs[R_TIM_CTRL] & TIMER_CTRL_INTR); |
| qemu_set_irq(st->irq, (ier && isr)); |
| } |
| |
| static void timer_update(struct Msf2Timer *st) |
| { |
| uint64_t count; |
| |
| if (!(st->regs[R_TIM_CTRL] & TIMER_CTRL_ENBL)) { |
| ptimer_stop(st->ptimer); |
| return; |
| } |
| |
| count = st->regs[R_TIM_LOADVAL]; |
| ptimer_set_limit(st->ptimer, count, 1); |
| ptimer_run(st->ptimer, 1); |
| } |
| |
| static uint64_t |
| timer_read(void *opaque, hwaddr offset, unsigned int size) |
| { |
| MSSTimerState *t = opaque; |
| hwaddr addr; |
| struct Msf2Timer *st; |
| uint32_t ret = 0; |
| int timer = 0; |
| int isr; |
| int ier; |
| |
| addr = offset >> 2; |
| /* |
| * Two independent timers has same base address. |
| * Based on address passed figure out which timer is being used. |
| */ |
| if ((addr >= R_TIM1_MAX) && (addr < NUM_TIMERS * R_TIM1_MAX)) { |
| timer = 1; |
| addr -= R_TIM1_MAX; |
| } |
| |
| st = &t->timers[timer]; |
| |
| switch (addr) { |
| case R_TIM_VAL: |
| ret = ptimer_get_count(st->ptimer); |
| break; |
| |
| case R_TIM_MIS: |
| isr = !!(st->regs[R_TIM_RIS] & TIMER_RIS_ACK); |
| ier = !!(st->regs[R_TIM_CTRL] & TIMER_CTRL_INTR); |
| ret = ier & isr; |
| break; |
| |
| default: |
| if (addr < R_TIM1_MAX) { |
| ret = st->regs[addr]; |
| } else { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| TYPE_MSS_TIMER": 64-bit mode not supported\n"); |
| return ret; |
| } |
| break; |
| } |
| |
| DB_PRINT("timer=%d 0x%" HWADDR_PRIx "=0x%" PRIx32, timer, offset, |
| ret); |
| return ret; |
| } |
| |
| static void |
| timer_write(void *opaque, hwaddr offset, |
| uint64_t val64, unsigned int size) |
| { |
| MSSTimerState *t = opaque; |
| hwaddr addr; |
| struct Msf2Timer *st; |
| int timer = 0; |
| uint32_t value = val64; |
| |
| addr = offset >> 2; |
| /* |
| * Two independent timers has same base address. |
| * Based on addr passed figure out which timer is being used. |
| */ |
| if ((addr >= R_TIM1_MAX) && (addr < NUM_TIMERS * R_TIM1_MAX)) { |
| timer = 1; |
| addr -= R_TIM1_MAX; |
| } |
| |
| st = &t->timers[timer]; |
| |
| DB_PRINT("addr=0x%" HWADDR_PRIx " val=0x%" PRIx32 " (timer=%d)", offset, |
| value, timer); |
| |
| switch (addr) { |
| case R_TIM_CTRL: |
| st->regs[R_TIM_CTRL] = value; |
| timer_update(st); |
| break; |
| |
| case R_TIM_RIS: |
| if (value & TIMER_RIS_ACK) { |
| st->regs[R_TIM_RIS] &= ~TIMER_RIS_ACK; |
| } |
| break; |
| |
| case R_TIM_LOADVAL: |
| st->regs[R_TIM_LOADVAL] = value; |
| if (st->regs[R_TIM_CTRL] & TIMER_CTRL_ENBL) { |
| timer_update(st); |
| } |
| break; |
| |
| case R_TIM_BGLOADVAL: |
| st->regs[R_TIM_BGLOADVAL] = value; |
| st->regs[R_TIM_LOADVAL] = value; |
| break; |
| |
| case R_TIM_VAL: |
| case R_TIM_MIS: |
| break; |
| |
| default: |
| if (addr < R_TIM1_MAX) { |
| st->regs[addr] = value; |
| } else { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| TYPE_MSS_TIMER": 64-bit mode not supported\n"); |
| return; |
| } |
| break; |
| } |
| timer_update_irq(st); |
| } |
| |
| static const MemoryRegionOps timer_ops = { |
| .read = timer_read, |
| .write = timer_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .valid = { |
| .min_access_size = 1, |
| .max_access_size = 4 |
| } |
| }; |
| |
| static void timer_hit(void *opaque) |
| { |
| struct Msf2Timer *st = opaque; |
| |
| st->regs[R_TIM_RIS] |= TIMER_RIS_ACK; |
| |
| if (!(st->regs[R_TIM_CTRL] & TIMER_CTRL_ONESHOT)) { |
| timer_update(st); |
| } |
| timer_update_irq(st); |
| } |
| |
| static void mss_timer_init(Object *obj) |
| { |
| MSSTimerState *t = MSS_TIMER(obj); |
| int i; |
| |
| /* Init all the ptimers. */ |
| for (i = 0; i < NUM_TIMERS; i++) { |
| struct Msf2Timer *st = &t->timers[i]; |
| |
| st->bh = qemu_bh_new(timer_hit, st); |
| st->ptimer = ptimer_init(st->bh, PTIMER_POLICY_DEFAULT); |
| ptimer_set_freq(st->ptimer, t->freq_hz); |
| sysbus_init_irq(SYS_BUS_DEVICE(obj), &st->irq); |
| } |
| |
| memory_region_init_io(&t->mmio, OBJECT(t), &timer_ops, t, TYPE_MSS_TIMER, |
| NUM_TIMERS * R_TIM1_MAX * 4); |
| sysbus_init_mmio(SYS_BUS_DEVICE(obj), &t->mmio); |
| } |
| |
| static const VMStateDescription vmstate_timers = { |
| .name = "mss-timer-block", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_PTIMER(ptimer, struct Msf2Timer), |
| VMSTATE_UINT32_ARRAY(regs, struct Msf2Timer, R_TIM1_MAX), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_mss_timer = { |
| .name = TYPE_MSS_TIMER, |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(freq_hz, MSSTimerState), |
| VMSTATE_STRUCT_ARRAY(timers, MSSTimerState, NUM_TIMERS, 0, |
| vmstate_timers, struct Msf2Timer), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static Property mss_timer_properties[] = { |
| /* Libero GUI shows 100Mhz as default for clocks */ |
| DEFINE_PROP_UINT32("clock-frequency", MSSTimerState, freq_hz, |
| 100 * 1000000), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void mss_timer_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->props = mss_timer_properties; |
| dc->vmsd = &vmstate_mss_timer; |
| } |
| |
| static const TypeInfo mss_timer_info = { |
| .name = TYPE_MSS_TIMER, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(MSSTimerState), |
| .instance_init = mss_timer_init, |
| .class_init = mss_timer_class_init, |
| }; |
| |
| static void mss_timer_register_types(void) |
| { |
| type_register_static(&mss_timer_info); |
| } |
| |
| type_init(mss_timer_register_types) |