| /* |
| * GICv2m extension for MSI/MSI-x support with a GICv2-based system |
| * |
| * Copyright (C) 2015 Linaro, All rights reserved. |
| * |
| * Author: Christoffer Dall <christoffer.dall@linaro.org> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| /* This file implements an emulated GICv2m widget as described in the ARM |
| * Server Base System Architecture (SBSA) specification Version 2.2 |
| * (ARM-DEN-0029 v2.2) pages 35-39 without any optional implementation defined |
| * identification registers and with a single non-secure MSI register frame. |
| */ |
| |
| #include "hw/sysbus.h" |
| #include "hw/pci/msi.h" |
| |
| #define TYPE_ARM_GICV2M "arm-gicv2m" |
| #define ARM_GICV2M(obj) OBJECT_CHECK(ARMGICv2mState, (obj), TYPE_ARM_GICV2M) |
| |
| #define GICV2M_NUM_SPI_MAX 128 |
| |
| #define V2M_MSI_TYPER 0x008 |
| #define V2M_MSI_SETSPI_NS 0x040 |
| #define V2M_MSI_IIDR 0xFCC |
| #define V2M_IIDR0 0xFD0 |
| #define V2M_IIDR11 0xFFC |
| |
| #define PRODUCT_ID_QEMU 0x51 /* ASCII code Q */ |
| |
| typedef struct ARMGICv2mState { |
| SysBusDevice parent_obj; |
| |
| MemoryRegion iomem; |
| qemu_irq spi[GICV2M_NUM_SPI_MAX]; |
| |
| uint32_t base_spi; |
| uint32_t num_spi; |
| } ARMGICv2mState; |
| |
| static void gicv2m_set_irq(void *opaque, int irq) |
| { |
| ARMGICv2mState *s = (ARMGICv2mState *)opaque; |
| |
| qemu_irq_pulse(s->spi[irq]); |
| } |
| |
| static uint64_t gicv2m_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| ARMGICv2mState *s = (ARMGICv2mState *)opaque; |
| uint32_t val; |
| |
| if (size != 4) { |
| qemu_log_mask(LOG_GUEST_ERROR, "gicv2m_read: bad size %u\n", size); |
| return 0; |
| } |
| |
| switch (offset) { |
| case V2M_MSI_TYPER: |
| val = (s->base_spi + 32) << 16; |
| val |= s->num_spi; |
| return val; |
| case V2M_MSI_IIDR: |
| /* We don't have any valid implementor so we leave that field as zero |
| * and we return 0 in the arch revision as per the spec. |
| */ |
| return (PRODUCT_ID_QEMU << 20); |
| case V2M_IIDR0 ... V2M_IIDR11: |
| /* We do not implement any optional identification registers and the |
| * mandatory MSI_PIDR2 register reads as 0x0, so we capture all |
| * implementation defined registers here. |
| */ |
| return 0; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "gicv2m_read: Bad offset %x\n", (int)offset); |
| return 0; |
| } |
| } |
| |
| static void gicv2m_write(void *opaque, hwaddr offset, |
| uint64_t value, unsigned size) |
| { |
| ARMGICv2mState *s = (ARMGICv2mState *)opaque; |
| |
| if (size != 2 && size != 4) { |
| qemu_log_mask(LOG_GUEST_ERROR, "gicv2m_write: bad size %u\n", size); |
| return; |
| } |
| |
| switch (offset) { |
| case V2M_MSI_SETSPI_NS: { |
| int spi; |
| |
| spi = (value & 0x3ff) - (s->base_spi + 32); |
| if (spi >= 0 && spi < s->num_spi) { |
| gicv2m_set_irq(s, spi); |
| } |
| return; |
| } |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "gicv2m_write: Bad offset %x\n", (int)offset); |
| } |
| } |
| |
| static const MemoryRegionOps gicv2m_ops = { |
| .read = gicv2m_read, |
| .write = gicv2m_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static void gicv2m_realize(DeviceState *dev, Error **errp) |
| { |
| ARMGICv2mState *s = ARM_GICV2M(dev); |
| int i; |
| |
| if (s->num_spi > GICV2M_NUM_SPI_MAX) { |
| error_setg(errp, |
| "requested %u SPIs exceeds GICv2m frame maximum %d", |
| s->num_spi, GICV2M_NUM_SPI_MAX); |
| return; |
| } |
| |
| if (s->base_spi + 32 > 1020 - s->num_spi) { |
| error_setg(errp, |
| "requested base SPI %u+%u exceeds max. number 1020", |
| s->base_spi + 32, s->num_spi); |
| return; |
| } |
| |
| for (i = 0; i < s->num_spi; i++) { |
| sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->spi[i]); |
| } |
| |
| msi_supported = true; |
| kvm_gsi_direct_mapping = true; |
| kvm_msi_via_irqfd_allowed = kvm_irqfds_enabled(); |
| } |
| |
| static void gicv2m_init(Object *obj) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(obj); |
| ARMGICv2mState *s = ARM_GICV2M(obj); |
| |
| memory_region_init_io(&s->iomem, OBJECT(s), &gicv2m_ops, s, |
| "gicv2m", 0x1000); |
| sysbus_init_mmio(sbd, &s->iomem); |
| } |
| |
| static Property gicv2m_properties[] = { |
| DEFINE_PROP_UINT32("base-spi", ARMGICv2mState, base_spi, 0), |
| DEFINE_PROP_UINT32("num-spi", ARMGICv2mState, num_spi, 64), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void gicv2m_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->props = gicv2m_properties; |
| dc->realize = gicv2m_realize; |
| } |
| |
| static const TypeInfo gicv2m_info = { |
| .name = TYPE_ARM_GICV2M, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(ARMGICv2mState), |
| .instance_init = gicv2m_init, |
| .class_init = gicv2m_class_init, |
| }; |
| |
| static void gicv2m_register_types(void) |
| { |
| type_register_static(&gicv2m_info); |
| } |
| |
| type_init(gicv2m_register_types) |