| #include "hw.h" |
| #include "qemu-error.h" |
| #include "scsi.h" |
| #include "scsi-defs.h" |
| #include "qdev.h" |
| |
| static struct BusInfo scsi_bus_info = { |
| .name = "SCSI", |
| .size = sizeof(SCSIBus), |
| .props = (Property[]) { |
| DEFINE_PROP_UINT32("scsi-id", SCSIDevice, id, -1), |
| DEFINE_PROP_END_OF_LIST(), |
| }, |
| }; |
| static int next_scsi_bus; |
| |
| /* Create a scsi bus, and attach devices to it. */ |
| void scsi_bus_new(SCSIBus *bus, DeviceState *host, int tcq, int ndev, |
| scsi_completionfn complete) |
| { |
| qbus_create_inplace(&bus->qbus, &scsi_bus_info, host, NULL); |
| bus->busnr = next_scsi_bus++; |
| bus->tcq = tcq; |
| bus->ndev = ndev; |
| bus->complete = complete; |
| bus->qbus.allow_hotplug = 1; |
| } |
| |
| static int scsi_qdev_init(DeviceState *qdev, DeviceInfo *base) |
| { |
| SCSIDevice *dev = DO_UPCAST(SCSIDevice, qdev, qdev); |
| SCSIDeviceInfo *info = DO_UPCAST(SCSIDeviceInfo, qdev, base); |
| SCSIBus *bus = DO_UPCAST(SCSIBus, qbus, dev->qdev.parent_bus); |
| int rc = -1; |
| |
| if (dev->id == -1) { |
| for (dev->id = 0; dev->id < bus->ndev; dev->id++) { |
| if (bus->devs[dev->id] == NULL) |
| break; |
| } |
| } |
| if (dev->id >= bus->ndev) { |
| error_report("bad scsi device id: %d", dev->id); |
| goto err; |
| } |
| |
| if (bus->devs[dev->id]) { |
| qdev_free(&bus->devs[dev->id]->qdev); |
| } |
| bus->devs[dev->id] = dev; |
| |
| dev->info = info; |
| QTAILQ_INIT(&dev->requests); |
| rc = dev->info->init(dev); |
| if (rc != 0) { |
| bus->devs[dev->id] = NULL; |
| } |
| |
| err: |
| return rc; |
| } |
| |
| static int scsi_qdev_exit(DeviceState *qdev) |
| { |
| SCSIDevice *dev = DO_UPCAST(SCSIDevice, qdev, qdev); |
| SCSIBus *bus = DO_UPCAST(SCSIBus, qbus, dev->qdev.parent_bus); |
| |
| assert(bus->devs[dev->id] != NULL); |
| if (bus->devs[dev->id]->info->destroy) { |
| bus->devs[dev->id]->info->destroy(bus->devs[dev->id]); |
| } |
| bus->devs[dev->id] = NULL; |
| return 0; |
| } |
| |
| void scsi_qdev_register(SCSIDeviceInfo *info) |
| { |
| info->qdev.bus_info = &scsi_bus_info; |
| info->qdev.init = scsi_qdev_init; |
| info->qdev.unplug = qdev_simple_unplug_cb; |
| info->qdev.exit = scsi_qdev_exit; |
| qdev_register(&info->qdev); |
| } |
| |
| /* handle legacy '-drive if=scsi,...' cmd line args */ |
| SCSIDevice *scsi_bus_legacy_add_drive(SCSIBus *bus, BlockDriverState *bdrv, int unit) |
| { |
| const char *driver; |
| DeviceState *dev; |
| |
| driver = bdrv_is_sg(bdrv) ? "scsi-generic" : "scsi-disk"; |
| dev = qdev_create(&bus->qbus, driver); |
| qdev_prop_set_uint32(dev, "scsi-id", unit); |
| if (qdev_prop_set_drive(dev, "drive", bdrv) < 0) { |
| qdev_free(dev); |
| return NULL; |
| } |
| if (qdev_init(dev) < 0) |
| return NULL; |
| return DO_UPCAST(SCSIDevice, qdev, dev); |
| } |
| |
| int scsi_bus_legacy_handle_cmdline(SCSIBus *bus) |
| { |
| Location loc; |
| DriveInfo *dinfo; |
| int res = 0, unit; |
| |
| loc_push_none(&loc); |
| for (unit = 0; unit < MAX_SCSI_DEVS; unit++) { |
| dinfo = drive_get(IF_SCSI, bus->busnr, unit); |
| if (dinfo == NULL) { |
| continue; |
| } |
| qemu_opts_loc_restore(dinfo->opts); |
| if (!scsi_bus_legacy_add_drive(bus, dinfo->bdrv, unit)) { |
| res = -1; |
| break; |
| } |
| } |
| loc_pop(&loc); |
| return res; |
| } |
| |
| void scsi_dev_clear_sense(SCSIDevice *dev) |
| { |
| memset(&dev->sense, 0, sizeof(dev->sense)); |
| } |
| |
| void scsi_dev_set_sense(SCSIDevice *dev, uint8_t key) |
| { |
| dev->sense.key = key; |
| } |
| |
| SCSIRequest *scsi_req_alloc(size_t size, SCSIDevice *d, uint32_t tag, uint32_t lun) |
| { |
| SCSIRequest *req; |
| |
| req = qemu_mallocz(size); |
| req->bus = scsi_bus_from_device(d); |
| req->dev = d; |
| req->tag = tag; |
| req->lun = lun; |
| req->status = -1; |
| req->enqueued = true; |
| QTAILQ_INSERT_TAIL(&d->requests, req, next); |
| return req; |
| } |
| |
| SCSIRequest *scsi_req_find(SCSIDevice *d, uint32_t tag) |
| { |
| SCSIRequest *req; |
| |
| QTAILQ_FOREACH(req, &d->requests, next) { |
| if (req->tag == tag) { |
| return req; |
| } |
| } |
| return NULL; |
| } |
| |
| static void scsi_req_dequeue(SCSIRequest *req) |
| { |
| if (req->enqueued) { |
| QTAILQ_REMOVE(&req->dev->requests, req, next); |
| req->enqueued = false; |
| } |
| } |
| |
| void scsi_req_free(SCSIRequest *req) |
| { |
| scsi_req_dequeue(req); |
| qemu_free(req); |
| } |
| |
| static int scsi_req_length(SCSIRequest *req, uint8_t *cmd) |
| { |
| switch (cmd[0] >> 5) { |
| case 0: |
| req->cmd.xfer = cmd[4]; |
| req->cmd.len = 6; |
| /* length 0 means 256 blocks */ |
| if (req->cmd.xfer == 0) |
| req->cmd.xfer = 256; |
| break; |
| case 1: |
| case 2: |
| req->cmd.xfer = cmd[8] | (cmd[7] << 8); |
| req->cmd.len = 10; |
| break; |
| case 4: |
| req->cmd.xfer = cmd[13] | (cmd[12] << 8) | (cmd[11] << 16) | (cmd[10] << 24); |
| req->cmd.len = 16; |
| break; |
| case 5: |
| req->cmd.xfer = cmd[9] | (cmd[8] << 8) | (cmd[7] << 16) | (cmd[6] << 24); |
| req->cmd.len = 12; |
| break; |
| default: |
| return -1; |
| } |
| |
| switch(cmd[0]) { |
| case TEST_UNIT_READY: |
| case REZERO_UNIT: |
| case START_STOP: |
| case SEEK_6: |
| case WRITE_FILEMARKS: |
| case SPACE: |
| case ERASE: |
| case ALLOW_MEDIUM_REMOVAL: |
| case VERIFY: |
| case SEEK_10: |
| case SYNCHRONIZE_CACHE: |
| case LOCK_UNLOCK_CACHE: |
| case LOAD_UNLOAD: |
| case SET_CD_SPEED: |
| case SET_LIMITS: |
| case WRITE_LONG: |
| case MOVE_MEDIUM: |
| case UPDATE_BLOCK: |
| req->cmd.xfer = 0; |
| break; |
| case MODE_SENSE: |
| break; |
| case WRITE_SAME: |
| req->cmd.xfer = 1; |
| break; |
| case READ_CAPACITY: |
| req->cmd.xfer = 8; |
| break; |
| case READ_BLOCK_LIMITS: |
| req->cmd.xfer = 6; |
| break; |
| case READ_POSITION: |
| req->cmd.xfer = 20; |
| break; |
| case SEND_VOLUME_TAG: |
| req->cmd.xfer *= 40; |
| break; |
| case MEDIUM_SCAN: |
| req->cmd.xfer *= 8; |
| break; |
| case WRITE_10: |
| case WRITE_VERIFY: |
| case WRITE_6: |
| case WRITE_12: |
| case WRITE_VERIFY_12: |
| case WRITE_16: |
| case WRITE_VERIFY_16: |
| req->cmd.xfer *= req->dev->blocksize; |
| break; |
| case READ_10: |
| case READ_6: |
| case READ_REVERSE: |
| case RECOVER_BUFFERED_DATA: |
| case READ_12: |
| case READ_16: |
| req->cmd.xfer *= req->dev->blocksize; |
| break; |
| case INQUIRY: |
| req->cmd.xfer = cmd[4] | (cmd[3] << 8); |
| break; |
| case MAINTENANCE_OUT: |
| case MAINTENANCE_IN: |
| if (req->dev->type == TYPE_ROM) { |
| /* GPCMD_REPORT_KEY and GPCMD_SEND_KEY from multi media commands */ |
| req->cmd.xfer = cmd[9] | (cmd[8] << 8); |
| } |
| break; |
| } |
| return 0; |
| } |
| |
| static int scsi_req_stream_length(SCSIRequest *req, uint8_t *cmd) |
| { |
| switch(cmd[0]) { |
| /* stream commands */ |
| case READ_6: |
| case READ_REVERSE: |
| case RECOVER_BUFFERED_DATA: |
| case WRITE_6: |
| req->cmd.len = 6; |
| req->cmd.xfer = cmd[4] | (cmd[3] << 8) | (cmd[2] << 16); |
| if (cmd[1] & 0x01) /* fixed */ |
| req->cmd.xfer *= req->dev->blocksize; |
| break; |
| case REWIND: |
| case START_STOP: |
| req->cmd.len = 6; |
| req->cmd.xfer = 0; |
| break; |
| /* generic commands */ |
| default: |
| return scsi_req_length(req, cmd); |
| } |
| return 0; |
| } |
| |
| static void scsi_req_xfer_mode(SCSIRequest *req) |
| { |
| switch (req->cmd.buf[0]) { |
| case WRITE_6: |
| case WRITE_10: |
| case WRITE_VERIFY: |
| case WRITE_12: |
| case WRITE_VERIFY_12: |
| case WRITE_16: |
| case WRITE_VERIFY_16: |
| case COPY: |
| case COPY_VERIFY: |
| case COMPARE: |
| case CHANGE_DEFINITION: |
| case LOG_SELECT: |
| case MODE_SELECT: |
| case MODE_SELECT_10: |
| case SEND_DIAGNOSTIC: |
| case WRITE_BUFFER: |
| case FORMAT_UNIT: |
| case REASSIGN_BLOCKS: |
| case RESERVE: |
| case SEARCH_EQUAL: |
| case SEARCH_HIGH: |
| case SEARCH_LOW: |
| case UPDATE_BLOCK: |
| case WRITE_LONG: |
| case WRITE_SAME: |
| case SEARCH_HIGH_12: |
| case SEARCH_EQUAL_12: |
| case SEARCH_LOW_12: |
| case SET_WINDOW: |
| case MEDIUM_SCAN: |
| case SEND_VOLUME_TAG: |
| case WRITE_LONG_2: |
| case PERSISTENT_RESERVE_OUT: |
| case MAINTENANCE_OUT: |
| req->cmd.mode = SCSI_XFER_TO_DEV; |
| break; |
| default: |
| if (req->cmd.xfer) |
| req->cmd.mode = SCSI_XFER_FROM_DEV; |
| else { |
| req->cmd.mode = SCSI_XFER_NONE; |
| } |
| break; |
| } |
| } |
| |
| static uint64_t scsi_req_lba(SCSIRequest *req) |
| { |
| uint8_t *buf = req->cmd.buf; |
| uint64_t lba; |
| |
| switch (buf[0] >> 5) { |
| case 0: |
| lba = (uint64_t) buf[3] | ((uint64_t) buf[2] << 8) | |
| (((uint64_t) buf[1] & 0x1f) << 16); |
| break; |
| case 1: |
| case 2: |
| lba = (uint64_t) buf[5] | ((uint64_t) buf[4] << 8) | |
| ((uint64_t) buf[3] << 16) | ((uint64_t) buf[2] << 24); |
| break; |
| case 4: |
| lba = (uint64_t) buf[9] | ((uint64_t) buf[8] << 8) | |
| ((uint64_t) buf[7] << 16) | ((uint64_t) buf[6] << 24) | |
| ((uint64_t) buf[5] << 32) | ((uint64_t) buf[4] << 40) | |
| ((uint64_t) buf[3] << 48) | ((uint64_t) buf[2] << 56); |
| break; |
| case 5: |
| lba = (uint64_t) buf[5] | ((uint64_t) buf[4] << 8) | |
| ((uint64_t) buf[3] << 16) | ((uint64_t) buf[2] << 24); |
| break; |
| default: |
| lba = -1; |
| |
| } |
| return lba; |
| } |
| |
| int scsi_req_parse(SCSIRequest *req, uint8_t *buf) |
| { |
| int rc; |
| |
| if (req->dev->type == TYPE_TAPE) { |
| rc = scsi_req_stream_length(req, buf); |
| } else { |
| rc = scsi_req_length(req, buf); |
| } |
| if (rc != 0) |
| return rc; |
| |
| memcpy(req->cmd.buf, buf, req->cmd.len); |
| scsi_req_xfer_mode(req); |
| req->cmd.lba = scsi_req_lba(req); |
| return 0; |
| } |
| |
| static const char *scsi_command_name(uint8_t cmd) |
| { |
| static const char *names[] = { |
| [ TEST_UNIT_READY ] = "TEST_UNIT_READY", |
| [ REZERO_UNIT ] = "REZERO_UNIT", |
| /* REWIND and REZERO_UNIT use the same operation code */ |
| [ REQUEST_SENSE ] = "REQUEST_SENSE", |
| [ FORMAT_UNIT ] = "FORMAT_UNIT", |
| [ READ_BLOCK_LIMITS ] = "READ_BLOCK_LIMITS", |
| [ REASSIGN_BLOCKS ] = "REASSIGN_BLOCKS", |
| [ READ_6 ] = "READ_6", |
| [ WRITE_6 ] = "WRITE_6", |
| [ SEEK_6 ] = "SEEK_6", |
| [ READ_REVERSE ] = "READ_REVERSE", |
| [ WRITE_FILEMARKS ] = "WRITE_FILEMARKS", |
| [ SPACE ] = "SPACE", |
| [ INQUIRY ] = "INQUIRY", |
| [ RECOVER_BUFFERED_DATA ] = "RECOVER_BUFFERED_DATA", |
| [ MAINTENANCE_IN ] = "MAINTENANCE_IN", |
| [ MAINTENANCE_OUT ] = "MAINTENANCE_OUT", |
| [ MODE_SELECT ] = "MODE_SELECT", |
| [ RESERVE ] = "RESERVE", |
| [ RELEASE ] = "RELEASE", |
| [ COPY ] = "COPY", |
| [ ERASE ] = "ERASE", |
| [ MODE_SENSE ] = "MODE_SENSE", |
| [ START_STOP ] = "START_STOP", |
| [ RECEIVE_DIAGNOSTIC ] = "RECEIVE_DIAGNOSTIC", |
| [ SEND_DIAGNOSTIC ] = "SEND_DIAGNOSTIC", |
| [ ALLOW_MEDIUM_REMOVAL ] = "ALLOW_MEDIUM_REMOVAL", |
| |
| [ SET_WINDOW ] = "SET_WINDOW", |
| [ READ_CAPACITY ] = "READ_CAPACITY", |
| [ READ_10 ] = "READ_10", |
| [ WRITE_10 ] = "WRITE_10", |
| [ SEEK_10 ] = "SEEK_10", |
| [ WRITE_VERIFY ] = "WRITE_VERIFY", |
| [ VERIFY ] = "VERIFY", |
| [ SEARCH_HIGH ] = "SEARCH_HIGH", |
| [ SEARCH_EQUAL ] = "SEARCH_EQUAL", |
| [ SEARCH_LOW ] = "SEARCH_LOW", |
| [ SET_LIMITS ] = "SET_LIMITS", |
| [ PRE_FETCH ] = "PRE_FETCH", |
| /* READ_POSITION and PRE_FETCH use the same operation code */ |
| [ SYNCHRONIZE_CACHE ] = "SYNCHRONIZE_CACHE", |
| [ LOCK_UNLOCK_CACHE ] = "LOCK_UNLOCK_CACHE", |
| [ READ_DEFECT_DATA ] = "READ_DEFECT_DATA", |
| [ MEDIUM_SCAN ] = "MEDIUM_SCAN", |
| [ COMPARE ] = "COMPARE", |
| [ COPY_VERIFY ] = "COPY_VERIFY", |
| [ WRITE_BUFFER ] = "WRITE_BUFFER", |
| [ READ_BUFFER ] = "READ_BUFFER", |
| [ UPDATE_BLOCK ] = "UPDATE_BLOCK", |
| [ READ_LONG ] = "READ_LONG", |
| [ WRITE_LONG ] = "WRITE_LONG", |
| [ CHANGE_DEFINITION ] = "CHANGE_DEFINITION", |
| [ WRITE_SAME ] = "WRITE_SAME", |
| [ READ_TOC ] = "READ_TOC", |
| [ LOG_SELECT ] = "LOG_SELECT", |
| [ LOG_SENSE ] = "LOG_SENSE", |
| [ MODE_SELECT_10 ] = "MODE_SELECT_10", |
| [ RESERVE_10 ] = "RESERVE_10", |
| [ RELEASE_10 ] = "RELEASE_10", |
| [ MODE_SENSE_10 ] = "MODE_SENSE_10", |
| [ PERSISTENT_RESERVE_IN ] = "PERSISTENT_RESERVE_IN", |
| [ PERSISTENT_RESERVE_OUT ] = "PERSISTENT_RESERVE_OUT", |
| [ MOVE_MEDIUM ] = "MOVE_MEDIUM", |
| [ READ_12 ] = "READ_12", |
| [ WRITE_12 ] = "WRITE_12", |
| [ WRITE_VERIFY_12 ] = "WRITE_VERIFY_12", |
| [ SEARCH_HIGH_12 ] = "SEARCH_HIGH_12", |
| [ SEARCH_EQUAL_12 ] = "SEARCH_EQUAL_12", |
| [ SEARCH_LOW_12 ] = "SEARCH_LOW_12", |
| [ READ_ELEMENT_STATUS ] = "READ_ELEMENT_STATUS", |
| [ SEND_VOLUME_TAG ] = "SEND_VOLUME_TAG", |
| [ WRITE_LONG_2 ] = "WRITE_LONG_2", |
| |
| [ REPORT_DENSITY_SUPPORT ] = "REPORT_DENSITY_SUPPORT", |
| [ GET_CONFIGURATION ] = "GET_CONFIGURATION", |
| [ READ_16 ] = "READ_16", |
| [ WRITE_16 ] = "WRITE_16", |
| [ WRITE_VERIFY_16 ] = "WRITE_VERIFY_16", |
| [ SERVICE_ACTION_IN ] = "SERVICE_ACTION_IN", |
| [ REPORT_LUNS ] = "REPORT_LUNS", |
| [ LOAD_UNLOAD ] = "LOAD_UNLOAD", |
| [ SET_CD_SPEED ] = "SET_CD_SPEED", |
| [ BLANK ] = "BLANK", |
| }; |
| |
| if (cmd >= ARRAY_SIZE(names) || names[cmd] == NULL) |
| return "*UNKNOWN*"; |
| return names[cmd]; |
| } |
| |
| void scsi_req_print(SCSIRequest *req) |
| { |
| FILE *fp = stderr; |
| int i; |
| |
| fprintf(fp, "[%s id=%d] %s", |
| req->dev->qdev.parent_bus->name, |
| req->dev->id, |
| scsi_command_name(req->cmd.buf[0])); |
| for (i = 1; i < req->cmd.len; i++) { |
| fprintf(fp, " 0x%02x", req->cmd.buf[i]); |
| } |
| switch (req->cmd.mode) { |
| case SCSI_XFER_NONE: |
| fprintf(fp, " - none\n"); |
| break; |
| case SCSI_XFER_FROM_DEV: |
| fprintf(fp, " - from-dev len=%zd\n", req->cmd.xfer); |
| break; |
| case SCSI_XFER_TO_DEV: |
| fprintf(fp, " - to-dev len=%zd\n", req->cmd.xfer); |
| break; |
| default: |
| fprintf(fp, " - Oops\n"); |
| break; |
| } |
| } |
| |
| void scsi_req_complete(SCSIRequest *req) |
| { |
| assert(req->status != -1); |
| scsi_req_dequeue(req); |
| req->bus->complete(req->bus, SCSI_REASON_DONE, |
| req->tag, |
| req->status); |
| } |