| /* |
| * QTest testcase for e1000e NIC |
| * |
| * Copyright (c) 2015 Ravello Systems LTD (http://ravellosystems.com) |
| * Developed by Daynix Computing LTD (http://www.daynix.com) |
| * |
| * Authors: |
| * Dmitry Fleytman <dmitry@daynix.com> |
| * Leonid Bloch <leonid@daynix.com> |
| * Yan Vugenfirer <yan@daynix.com> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| |
| #include "qemu/osdep.h" |
| #include "libqtest.h" |
| #include "qemu-common.h" |
| #include "libqos/pci-pc.h" |
| #include "qemu/sockets.h" |
| #include "qemu/iov.h" |
| #include "qemu/bitops.h" |
| #include "libqos/malloc.h" |
| #include "libqos/malloc-pc.h" |
| #include "libqos/malloc-generic.h" |
| |
| #define E1000E_IMS (0x00d0) |
| |
| #define E1000E_STATUS (0x0008) |
| #define E1000E_STATUS_LU BIT(1) |
| #define E1000E_STATUS_ASDV1000 BIT(9) |
| |
| #define E1000E_CTRL (0x0000) |
| #define E1000E_CTRL_RESET BIT(26) |
| |
| #define E1000E_RCTL (0x0100) |
| #define E1000E_RCTL_EN BIT(1) |
| #define E1000E_RCTL_UPE BIT(3) |
| #define E1000E_RCTL_MPE BIT(4) |
| |
| #define E1000E_RFCTL (0x5008) |
| #define E1000E_RFCTL_EXTEN BIT(15) |
| |
| #define E1000E_TCTL (0x0400) |
| #define E1000E_TCTL_EN BIT(1) |
| |
| #define E1000E_CTRL_EXT (0x0018) |
| #define E1000E_CTRL_EXT_DRV_LOAD BIT(28) |
| #define E1000E_CTRL_EXT_TXLSFLOW BIT(22) |
| |
| #define E1000E_RX0_MSG_ID (0) |
| #define E1000E_TX0_MSG_ID (1) |
| #define E1000E_OTHER_MSG_ID (2) |
| |
| #define E1000E_IVAR (0x00E4) |
| #define E1000E_IVAR_TEST_CFG ((E1000E_RX0_MSG_ID << 0) | BIT(3) | \ |
| (E1000E_TX0_MSG_ID << 8) | BIT(11) | \ |
| (E1000E_OTHER_MSG_ID << 16) | BIT(19) | \ |
| BIT(31)) |
| |
| #define E1000E_RING_LEN (0x1000) |
| #define E1000E_TXD_LEN (16) |
| #define E1000E_RXD_LEN (16) |
| |
| #define E1000E_TDBAL (0x3800) |
| #define E1000E_TDBAH (0x3804) |
| #define E1000E_TDLEN (0x3808) |
| #define E1000E_TDH (0x3810) |
| #define E1000E_TDT (0x3818) |
| |
| #define E1000E_RDBAL (0x2800) |
| #define E1000E_RDBAH (0x2804) |
| #define E1000E_RDLEN (0x2808) |
| #define E1000E_RDH (0x2810) |
| #define E1000E_RDT (0x2818) |
| |
| typedef struct e1000e_device { |
| QPCIDevice *pci_dev; |
| QPCIBar mac_regs; |
| |
| uint64_t tx_ring; |
| uint64_t rx_ring; |
| } e1000e_device; |
| |
| static int test_sockets[2]; |
| static QGuestAllocator *test_alloc; |
| static QPCIBus *test_bus; |
| |
| static void e1000e_pci_foreach_callback(QPCIDevice *dev, int devfn, void *data) |
| { |
| *(QPCIDevice **) data = dev; |
| } |
| |
| static QPCIDevice *e1000e_device_find(QPCIBus *bus) |
| { |
| static const int e1000e_vendor_id = 0x8086; |
| static const int e1000e_dev_id = 0x10D3; |
| |
| QPCIDevice *e1000e_dev = NULL; |
| |
| qpci_device_foreach(bus, e1000e_vendor_id, e1000e_dev_id, |
| e1000e_pci_foreach_callback, &e1000e_dev); |
| |
| g_assert_nonnull(e1000e_dev); |
| |
| return e1000e_dev; |
| } |
| |
| static void e1000e_macreg_write(e1000e_device *d, uint32_t reg, uint32_t val) |
| { |
| qpci_io_writel(d->pci_dev, d->mac_regs, reg, val); |
| } |
| |
| static uint32_t e1000e_macreg_read(e1000e_device *d, uint32_t reg) |
| { |
| return qpci_io_readl(d->pci_dev, d->mac_regs, reg); |
| } |
| |
| static void e1000e_device_init(QPCIBus *bus, e1000e_device *d) |
| { |
| uint32_t val; |
| |
| d->pci_dev = e1000e_device_find(bus); |
| |
| /* Enable the device */ |
| qpci_device_enable(d->pci_dev); |
| |
| /* Map BAR0 (mac registers) */ |
| d->mac_regs = qpci_iomap(d->pci_dev, 0, NULL); |
| |
| /* Reset the device */ |
| val = e1000e_macreg_read(d, E1000E_CTRL); |
| e1000e_macreg_write(d, E1000E_CTRL, val | E1000E_CTRL_RESET); |
| |
| /* Enable and configure MSI-X */ |
| qpci_msix_enable(d->pci_dev); |
| e1000e_macreg_write(d, E1000E_IVAR, E1000E_IVAR_TEST_CFG); |
| |
| /* Check the device status - link and speed */ |
| val = e1000e_macreg_read(d, E1000E_STATUS); |
| g_assert_cmphex(val & (E1000E_STATUS_LU | E1000E_STATUS_ASDV1000), |
| ==, E1000E_STATUS_LU | E1000E_STATUS_ASDV1000); |
| |
| /* Initialize TX/RX logic */ |
| e1000e_macreg_write(d, E1000E_RCTL, 0); |
| e1000e_macreg_write(d, E1000E_TCTL, 0); |
| |
| /* Notify the device that the driver is ready */ |
| val = e1000e_macreg_read(d, E1000E_CTRL_EXT); |
| e1000e_macreg_write(d, E1000E_CTRL_EXT, |
| val | E1000E_CTRL_EXT_DRV_LOAD | E1000E_CTRL_EXT_TXLSFLOW); |
| |
| /* Allocate and setup TX ring */ |
| d->tx_ring = guest_alloc(test_alloc, E1000E_RING_LEN); |
| g_assert(d->tx_ring != 0); |
| |
| e1000e_macreg_write(d, E1000E_TDBAL, (uint32_t) d->tx_ring); |
| e1000e_macreg_write(d, E1000E_TDBAH, (uint32_t) (d->tx_ring >> 32)); |
| e1000e_macreg_write(d, E1000E_TDLEN, E1000E_RING_LEN); |
| e1000e_macreg_write(d, E1000E_TDT, 0); |
| e1000e_macreg_write(d, E1000E_TDH, 0); |
| |
| /* Enable transmit */ |
| e1000e_macreg_write(d, E1000E_TCTL, E1000E_TCTL_EN); |
| |
| /* Allocate and setup RX ring */ |
| d->rx_ring = guest_alloc(test_alloc, E1000E_RING_LEN); |
| g_assert(d->rx_ring != 0); |
| |
| e1000e_macreg_write(d, E1000E_RDBAL, (uint32_t)d->rx_ring); |
| e1000e_macreg_write(d, E1000E_RDBAH, (uint32_t)(d->rx_ring >> 32)); |
| e1000e_macreg_write(d, E1000E_RDLEN, E1000E_RING_LEN); |
| e1000e_macreg_write(d, E1000E_RDT, 0); |
| e1000e_macreg_write(d, E1000E_RDH, 0); |
| |
| /* Enable receive */ |
| e1000e_macreg_write(d, E1000E_RFCTL, E1000E_RFCTL_EXTEN); |
| e1000e_macreg_write(d, E1000E_RCTL, E1000E_RCTL_EN | |
| E1000E_RCTL_UPE | |
| E1000E_RCTL_MPE); |
| |
| /* Enable all interrupts */ |
| e1000e_macreg_write(d, E1000E_IMS, 0xFFFFFFFF); |
| } |
| |
| static void e1000e_tx_ring_push(e1000e_device *d, void *descr) |
| { |
| uint32_t tail = e1000e_macreg_read(d, E1000E_TDT); |
| uint32_t len = e1000e_macreg_read(d, E1000E_TDLEN) / E1000E_TXD_LEN; |
| |
| memwrite(d->tx_ring + tail * E1000E_TXD_LEN, descr, E1000E_TXD_LEN); |
| e1000e_macreg_write(d, E1000E_TDT, (tail + 1) % len); |
| |
| /* Read WB data for the packet transmitted */ |
| memread(d->tx_ring + tail * E1000E_TXD_LEN, descr, E1000E_TXD_LEN); |
| } |
| |
| static void e1000e_rx_ring_push(e1000e_device *d, void *descr) |
| { |
| uint32_t tail = e1000e_macreg_read(d, E1000E_RDT); |
| uint32_t len = e1000e_macreg_read(d, E1000E_RDLEN) / E1000E_RXD_LEN; |
| |
| memwrite(d->rx_ring + tail * E1000E_RXD_LEN, descr, E1000E_RXD_LEN); |
| e1000e_macreg_write(d, E1000E_RDT, (tail + 1) % len); |
| |
| /* Read WB data for the packet received */ |
| memread(d->rx_ring + tail * E1000E_RXD_LEN, descr, E1000E_RXD_LEN); |
| } |
| |
| static void e1000e_wait_isr(e1000e_device *d, uint16_t msg_id) |
| { |
| guint64 end_time = g_get_monotonic_time() + 5 * G_TIME_SPAN_SECOND; |
| |
| do { |
| if (qpci_msix_pending(d->pci_dev, msg_id)) { |
| return; |
| } |
| clock_step(10000); |
| } while (g_get_monotonic_time() < end_time); |
| |
| g_error("Timeout expired"); |
| } |
| |
| static void e1000e_send_verify(e1000e_device *d) |
| { |
| struct { |
| uint64_t buffer_addr; |
| union { |
| uint32_t data; |
| struct { |
| uint16_t length; |
| uint8_t cso; |
| uint8_t cmd; |
| } flags; |
| } lower; |
| union { |
| uint32_t data; |
| struct { |
| uint8_t status; |
| uint8_t css; |
| uint16_t special; |
| } fields; |
| } upper; |
| } descr; |
| |
| static const uint32_t dtyp_data = BIT(20); |
| static const uint32_t dtyp_ext = BIT(29); |
| static const uint32_t dcmd_rs = BIT(27); |
| static const uint32_t dcmd_eop = BIT(24); |
| static const uint32_t dsta_dd = BIT(0); |
| static const int data_len = 64; |
| char buffer[64]; |
| int ret; |
| uint32_t recv_len; |
| |
| /* Prepare test data buffer */ |
| uint64_t data = guest_alloc(test_alloc, data_len); |
| memwrite(data, "TEST", 5); |
| |
| /* Prepare TX descriptor */ |
| memset(&descr, 0, sizeof(descr)); |
| descr.buffer_addr = cpu_to_le64(data); |
| descr.lower.data = cpu_to_le32(dcmd_rs | |
| dcmd_eop | |
| dtyp_ext | |
| dtyp_data | |
| data_len); |
| |
| /* Put descriptor to the ring */ |
| e1000e_tx_ring_push(d, &descr); |
| |
| /* Wait for TX WB interrupt */ |
| e1000e_wait_isr(d, E1000E_TX0_MSG_ID); |
| |
| /* Check DD bit */ |
| g_assert_cmphex(le32_to_cpu(descr.upper.data) & dsta_dd, ==, dsta_dd); |
| |
| /* Check data sent to the backend */ |
| ret = qemu_recv(test_sockets[0], &recv_len, sizeof(recv_len), 0); |
| g_assert_cmpint(ret, == , sizeof(recv_len)); |
| qemu_recv(test_sockets[0], buffer, 64, 0); |
| g_assert_cmpstr(buffer, == , "TEST"); |
| |
| /* Free test data buffer */ |
| guest_free(test_alloc, data); |
| } |
| |
| static void e1000e_receive_verify(e1000e_device *d) |
| { |
| union { |
| struct { |
| uint64_t buffer_addr; |
| uint64_t reserved; |
| } read; |
| struct { |
| struct { |
| uint32_t mrq; |
| union { |
| uint32_t rss; |
| struct { |
| uint16_t ip_id; |
| uint16_t csum; |
| } csum_ip; |
| } hi_dword; |
| } lower; |
| struct { |
| uint32_t status_error; |
| uint16_t length; |
| uint16_t vlan; |
| } upper; |
| } wb; |
| } descr; |
| |
| static const uint32_t esta_dd = BIT(0); |
| |
| char test[] = "TEST"; |
| int len = htonl(sizeof(test)); |
| struct iovec iov[] = { |
| { |
| .iov_base = &len, |
| .iov_len = sizeof(len), |
| },{ |
| .iov_base = test, |
| .iov_len = sizeof(test), |
| }, |
| }; |
| |
| static const int data_len = 64; |
| char buffer[64]; |
| int ret; |
| |
| /* Send a dummy packet to device's socket*/ |
| ret = iov_send(test_sockets[0], iov, 2, 0, sizeof(len) + sizeof(test)); |
| g_assert_cmpint(ret, == , sizeof(test) + sizeof(len)); |
| |
| /* Prepare test data buffer */ |
| uint64_t data = guest_alloc(test_alloc, data_len); |
| |
| /* Prepare RX descriptor */ |
| memset(&descr, 0, sizeof(descr)); |
| descr.read.buffer_addr = cpu_to_le64(data); |
| |
| /* Put descriptor to the ring */ |
| e1000e_rx_ring_push(d, &descr); |
| |
| /* Wait for TX WB interrupt */ |
| e1000e_wait_isr(d, E1000E_RX0_MSG_ID); |
| |
| /* Check DD bit */ |
| g_assert_cmphex(le32_to_cpu(descr.wb.upper.status_error) & |
| esta_dd, ==, esta_dd); |
| |
| /* Check data sent to the backend */ |
| memread(data, buffer, sizeof(buffer)); |
| g_assert_cmpstr(buffer, == , "TEST"); |
| |
| /* Free test data buffer */ |
| guest_free(test_alloc, data); |
| } |
| |
| static void e1000e_device_clear(QPCIBus *bus, e1000e_device *d) |
| { |
| qpci_iounmap(d->pci_dev, d->mac_regs); |
| qpci_msix_disable(d->pci_dev); |
| } |
| |
| static void data_test_init(e1000e_device *d) |
| { |
| char *cmdline; |
| |
| int ret = socketpair(PF_UNIX, SOCK_STREAM, 0, test_sockets); |
| g_assert_cmpint(ret, != , -1); |
| |
| cmdline = g_strdup_printf("-netdev socket,fd=%d,id=hs0 " |
| "-device e1000e,netdev=hs0", test_sockets[1]); |
| g_assert_nonnull(cmdline); |
| |
| qtest_start(cmdline); |
| g_free(cmdline); |
| |
| test_bus = qpci_init_pc(NULL); |
| g_assert_nonnull(test_bus); |
| |
| test_alloc = pc_alloc_init(); |
| g_assert_nonnull(test_alloc); |
| |
| e1000e_device_init(test_bus, d); |
| } |
| |
| static void data_test_clear(e1000e_device *d) |
| { |
| e1000e_device_clear(test_bus, d); |
| close(test_sockets[0]); |
| pc_alloc_uninit(test_alloc); |
| qpci_free_pc(test_bus); |
| qtest_end(); |
| } |
| |
| static void test_e1000e_init(gconstpointer data) |
| { |
| e1000e_device d; |
| |
| data_test_init(&d); |
| data_test_clear(&d); |
| } |
| |
| static void test_e1000e_tx(gconstpointer data) |
| { |
| e1000e_device d; |
| |
| data_test_init(&d); |
| e1000e_send_verify(&d); |
| data_test_clear(&d); |
| } |
| |
| static void test_e1000e_rx(gconstpointer data) |
| { |
| e1000e_device d; |
| |
| data_test_init(&d); |
| e1000e_receive_verify(&d); |
| data_test_clear(&d); |
| } |
| |
| static void test_e1000e_multiple_transfers(gconstpointer data) |
| { |
| static const long iterations = 4 * 1024; |
| long i; |
| |
| e1000e_device d; |
| |
| data_test_init(&d); |
| |
| for (i = 0; i < iterations; i++) { |
| e1000e_send_verify(&d); |
| e1000e_receive_verify(&d); |
| } |
| |
| data_test_clear(&d); |
| } |
| |
| static void test_e1000e_hotplug(gconstpointer data) |
| { |
| static const uint8_t slot = 0x06; |
| |
| qtest_start("-device e1000e"); |
| |
| qpci_plug_device_test("e1000e", "e1000e_net", slot, NULL); |
| qpci_unplug_acpi_device_test("e1000e_net", slot); |
| |
| qtest_end(); |
| } |
| |
| int main(int argc, char **argv) |
| { |
| g_test_init(&argc, &argv, NULL); |
| |
| qtest_add_data_func("e1000e/init", NULL, test_e1000e_init); |
| qtest_add_data_func("e1000e/tx", NULL, test_e1000e_tx); |
| qtest_add_data_func("e1000e/rx", NULL, test_e1000e_rx); |
| qtest_add_data_func("e1000e/multiple_transfers", NULL, |
| test_e1000e_multiple_transfers); |
| qtest_add_data_func("e1000e/hotplug", NULL, test_e1000e_hotplug); |
| |
| return g_test_run(); |
| } |