| /* |
| * QEMU model of the Xilinx Zynq SPI controller |
| * |
| * Copyright (c) 2012 Peter A. G. Crosthwaite |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/sysbus.h" |
| #include "sysemu/sysemu.h" |
| #include "hw/ptimer.h" |
| #include "qemu/log.h" |
| #include "qemu/fifo8.h" |
| #include "hw/ssi/ssi.h" |
| #include "qemu/bitops.h" |
| #include "hw/ssi/xilinx_spips.h" |
| |
| #ifndef XILINX_SPIPS_ERR_DEBUG |
| #define XILINX_SPIPS_ERR_DEBUG 0 |
| #endif |
| |
| #define DB_PRINT_L(level, ...) do { \ |
| if (XILINX_SPIPS_ERR_DEBUG > (level)) { \ |
| fprintf(stderr, ": %s: ", __func__); \ |
| fprintf(stderr, ## __VA_ARGS__); \ |
| } \ |
| } while (0); |
| |
| /* config register */ |
| #define R_CONFIG (0x00 / 4) |
| #define IFMODE (1U << 31) |
| #define ENDIAN (1 << 26) |
| #define MODEFAIL_GEN_EN (1 << 17) |
| #define MAN_START_COM (1 << 16) |
| #define MAN_START_EN (1 << 15) |
| #define MANUAL_CS (1 << 14) |
| #define CS (0xF << 10) |
| #define CS_SHIFT (10) |
| #define PERI_SEL (1 << 9) |
| #define REF_CLK (1 << 8) |
| #define FIFO_WIDTH (3 << 6) |
| #define BAUD_RATE_DIV (7 << 3) |
| #define CLK_PH (1 << 2) |
| #define CLK_POL (1 << 1) |
| #define MODE_SEL (1 << 0) |
| #define R_CONFIG_RSVD (0x7bf40000) |
| |
| /* interrupt mechanism */ |
| #define R_INTR_STATUS (0x04 / 4) |
| #define R_INTR_EN (0x08 / 4) |
| #define R_INTR_DIS (0x0C / 4) |
| #define R_INTR_MASK (0x10 / 4) |
| #define IXR_TX_FIFO_UNDERFLOW (1 << 6) |
| #define IXR_RX_FIFO_FULL (1 << 5) |
| #define IXR_RX_FIFO_NOT_EMPTY (1 << 4) |
| #define IXR_TX_FIFO_FULL (1 << 3) |
| #define IXR_TX_FIFO_NOT_FULL (1 << 2) |
| #define IXR_TX_FIFO_MODE_FAIL (1 << 1) |
| #define IXR_RX_FIFO_OVERFLOW (1 << 0) |
| #define IXR_ALL ((IXR_TX_FIFO_UNDERFLOW<<1)-1) |
| |
| #define R_EN (0x14 / 4) |
| #define R_DELAY (0x18 / 4) |
| #define R_TX_DATA (0x1C / 4) |
| #define R_RX_DATA (0x20 / 4) |
| #define R_SLAVE_IDLE_COUNT (0x24 / 4) |
| #define R_TX_THRES (0x28 / 4) |
| #define R_RX_THRES (0x2C / 4) |
| #define R_TXD1 (0x80 / 4) |
| #define R_TXD2 (0x84 / 4) |
| #define R_TXD3 (0x88 / 4) |
| |
| #define R_LQSPI_CFG (0xa0 / 4) |
| #define R_LQSPI_CFG_RESET 0x03A002EB |
| #define LQSPI_CFG_LQ_MODE (1U << 31) |
| #define LQSPI_CFG_TWO_MEM (1 << 30) |
| #define LQSPI_CFG_SEP_BUS (1 << 30) |
| #define LQSPI_CFG_U_PAGE (1 << 28) |
| #define LQSPI_CFG_MODE_EN (1 << 25) |
| #define LQSPI_CFG_MODE_WIDTH 8 |
| #define LQSPI_CFG_MODE_SHIFT 16 |
| #define LQSPI_CFG_DUMMY_WIDTH 3 |
| #define LQSPI_CFG_DUMMY_SHIFT 8 |
| #define LQSPI_CFG_INST_CODE 0xFF |
| |
| #define R_LQSPI_STS (0xA4 / 4) |
| #define LQSPI_STS_WR_RECVD (1 << 1) |
| |
| #define R_MOD_ID (0xFC / 4) |
| |
| /* size of TXRX FIFOs */ |
| #define RXFF_A 32 |
| #define TXFF_A 32 |
| |
| #define RXFF_A_Q (64 * 4) |
| #define TXFF_A_Q (64 * 4) |
| |
| /* 16MB per linear region */ |
| #define LQSPI_ADDRESS_BITS 24 |
| /* Bite off 4k chunks at a time */ |
| #define LQSPI_CACHE_SIZE 1024 |
| |
| #define SNOOP_CHECKING 0xFF |
| #define SNOOP_NONE 0xFE |
| #define SNOOP_STRIPING 0 |
| |
| typedef enum { |
| READ = 0x3, |
| FAST_READ = 0xb, |
| DOR = 0x3b, |
| QOR = 0x6b, |
| DIOR = 0xbb, |
| QIOR = 0xeb, |
| |
| PP = 0x2, |
| DPP = 0xa2, |
| QPP = 0x32, |
| } FlashCMD; |
| |
| typedef struct { |
| XilinxSPIPS parent_obj; |
| |
| uint8_t lqspi_buf[LQSPI_CACHE_SIZE]; |
| hwaddr lqspi_cached_addr; |
| } XilinxQSPIPS; |
| |
| typedef struct XilinxSPIPSClass { |
| SysBusDeviceClass parent_class; |
| |
| const MemoryRegionOps *reg_ops; |
| |
| uint32_t rx_fifo_size; |
| uint32_t tx_fifo_size; |
| } XilinxSPIPSClass; |
| |
| static inline int num_effective_busses(XilinxSPIPS *s) |
| { |
| return (s->regs[R_LQSPI_CFG] & LQSPI_CFG_SEP_BUS && |
| s->regs[R_LQSPI_CFG] & LQSPI_CFG_TWO_MEM) ? s->num_busses : 1; |
| } |
| |
| static inline bool xilinx_spips_cs_is_set(XilinxSPIPS *s, int i, int field) |
| { |
| return ~field & (1 << i) && (s->regs[R_CONFIG] & MANUAL_CS |
| || !fifo8_is_empty(&s->tx_fifo)); |
| } |
| |
| static void xilinx_spips_update_cs_lines(XilinxSPIPS *s) |
| { |
| int i, j; |
| bool found = false; |
| int field = s->regs[R_CONFIG] >> CS_SHIFT; |
| |
| for (i = 0; i < s->num_cs; i++) { |
| for (j = 0; j < num_effective_busses(s); j++) { |
| int upage = !!(s->regs[R_LQSPI_STS] & LQSPI_CFG_U_PAGE); |
| int cs_to_set = (j * s->num_cs + i + upage) % |
| (s->num_cs * s->num_busses); |
| |
| if (xilinx_spips_cs_is_set(s, i, field) && !found) { |
| DB_PRINT_L(0, "selecting slave %d\n", i); |
| qemu_set_irq(s->cs_lines[cs_to_set], 0); |
| } else { |
| DB_PRINT_L(0, "deselecting slave %d\n", i); |
| qemu_set_irq(s->cs_lines[cs_to_set], 1); |
| } |
| } |
| if (xilinx_spips_cs_is_set(s, i, field)) { |
| found = true; |
| } |
| } |
| if (!found) { |
| s->snoop_state = SNOOP_CHECKING; |
| DB_PRINT_L(1, "moving to snoop check state\n"); |
| } |
| } |
| |
| static void xilinx_spips_update_ixr(XilinxSPIPS *s) |
| { |
| if (s->regs[R_LQSPI_CFG] & LQSPI_CFG_LQ_MODE) { |
| return; |
| } |
| /* These are set/cleared as they occur */ |
| s->regs[R_INTR_STATUS] &= (IXR_TX_FIFO_UNDERFLOW | IXR_RX_FIFO_OVERFLOW | |
| IXR_TX_FIFO_MODE_FAIL); |
| /* these are pure functions of fifo state, set them here */ |
| s->regs[R_INTR_STATUS] |= |
| (fifo8_is_full(&s->rx_fifo) ? IXR_RX_FIFO_FULL : 0) | |
| (s->rx_fifo.num >= s->regs[R_RX_THRES] ? IXR_RX_FIFO_NOT_EMPTY : 0) | |
| (fifo8_is_full(&s->tx_fifo) ? IXR_TX_FIFO_FULL : 0) | |
| (s->tx_fifo.num < s->regs[R_TX_THRES] ? IXR_TX_FIFO_NOT_FULL : 0); |
| /* drive external interrupt pin */ |
| int new_irqline = !!(s->regs[R_INTR_MASK] & s->regs[R_INTR_STATUS] & |
| IXR_ALL); |
| if (new_irqline != s->irqline) { |
| s->irqline = new_irqline; |
| qemu_set_irq(s->irq, s->irqline); |
| } |
| } |
| |
| static void xilinx_spips_reset(DeviceState *d) |
| { |
| XilinxSPIPS *s = XILINX_SPIPS(d); |
| |
| int i; |
| for (i = 0; i < XLNX_SPIPS_R_MAX; i++) { |
| s->regs[i] = 0; |
| } |
| |
| fifo8_reset(&s->rx_fifo); |
| fifo8_reset(&s->rx_fifo); |
| /* non zero resets */ |
| s->regs[R_CONFIG] |= MODEFAIL_GEN_EN; |
| s->regs[R_SLAVE_IDLE_COUNT] = 0xFF; |
| s->regs[R_TX_THRES] = 1; |
| s->regs[R_RX_THRES] = 1; |
| /* FIXME: move magic number definition somewhere sensible */ |
| s->regs[R_MOD_ID] = 0x01090106; |
| s->regs[R_LQSPI_CFG] = R_LQSPI_CFG_RESET; |
| s->snoop_state = SNOOP_CHECKING; |
| xilinx_spips_update_ixr(s); |
| xilinx_spips_update_cs_lines(s); |
| } |
| |
| /* N way (num) in place bit striper. Lay out row wise bits (LSB to MSB) |
| * column wise (from element 0 to N-1). num is the length of x, and dir |
| * reverses the direction of the transform. Best illustrated by example: |
| * Each digit in the below array is a single bit (num == 3): |
| * |
| * {{ 76543210, } ----- stripe (dir == false) -----> {{ FCheb630, } |
| * { hgfedcba, } { GDAfc741, } |
| * { HGFEDCBA, }} <---- upstripe (dir == true) ----- { HEBgda52, }} |
| */ |
| |
| static inline void stripe8(uint8_t *x, int num, bool dir) |
| { |
| uint8_t r[num]; |
| memset(r, 0, sizeof(uint8_t) * num); |
| int idx[2] = {0, 0}; |
| int bit[2] = {0, 0}; |
| int d = dir; |
| |
| for (idx[0] = 0; idx[0] < num; ++idx[0]) { |
| for (bit[0] = 0; bit[0] < 8; ++bit[0]) { |
| r[idx[d]] |= x[idx[!d]] & 1 << bit[!d] ? 1 << bit[d] : 0; |
| idx[1] = (idx[1] + 1) % num; |
| if (!idx[1]) { |
| bit[1]++; |
| } |
| } |
| } |
| memcpy(x, r, sizeof(uint8_t) * num); |
| } |
| |
| static void xilinx_spips_flush_txfifo(XilinxSPIPS *s) |
| { |
| int debug_level = 0; |
| |
| for (;;) { |
| int i; |
| uint8_t tx = 0; |
| uint8_t tx_rx[num_effective_busses(s)]; |
| |
| if (fifo8_is_empty(&s->tx_fifo)) { |
| if (!(s->regs[R_LQSPI_CFG] & LQSPI_CFG_LQ_MODE)) { |
| s->regs[R_INTR_STATUS] |= IXR_TX_FIFO_UNDERFLOW; |
| } |
| xilinx_spips_update_ixr(s); |
| return; |
| } else if (s->snoop_state == SNOOP_STRIPING) { |
| for (i = 0; i < num_effective_busses(s); ++i) { |
| tx_rx[i] = fifo8_pop(&s->tx_fifo); |
| } |
| stripe8(tx_rx, num_effective_busses(s), false); |
| } else { |
| tx = fifo8_pop(&s->tx_fifo); |
| for (i = 0; i < num_effective_busses(s); ++i) { |
| tx_rx[i] = tx; |
| } |
| } |
| |
| for (i = 0; i < num_effective_busses(s); ++i) { |
| DB_PRINT_L(debug_level, "tx = %02x\n", tx_rx[i]); |
| tx_rx[i] = ssi_transfer(s->spi[i], (uint32_t)tx_rx[i]); |
| DB_PRINT_L(debug_level, "rx = %02x\n", tx_rx[i]); |
| } |
| |
| if (fifo8_is_full(&s->rx_fifo)) { |
| s->regs[R_INTR_STATUS] |= IXR_RX_FIFO_OVERFLOW; |
| DB_PRINT_L(0, "rx FIFO overflow"); |
| } else if (s->snoop_state == SNOOP_STRIPING) { |
| stripe8(tx_rx, num_effective_busses(s), true); |
| for (i = 0; i < num_effective_busses(s); ++i) { |
| fifo8_push(&s->rx_fifo, (uint8_t)tx_rx[i]); |
| } |
| } else { |
| fifo8_push(&s->rx_fifo, (uint8_t)tx_rx[0]); |
| } |
| |
| DB_PRINT_L(debug_level, "initial snoop state: %x\n", |
| (unsigned)s->snoop_state); |
| switch (s->snoop_state) { |
| case (SNOOP_CHECKING): |
| switch (tx) { /* new instruction code */ |
| case READ: /* 3 address bytes, no dummy bytes/cycles */ |
| case PP: |
| case DPP: |
| case QPP: |
| s->snoop_state = 3; |
| break; |
| case FAST_READ: /* 3 address bytes, 1 dummy byte */ |
| case DOR: |
| case QOR: |
| case DIOR: /* FIXME: these vary between vendor - set to spansion */ |
| s->snoop_state = 4; |
| break; |
| case QIOR: /* 3 address bytes, 2 dummy bytes */ |
| s->snoop_state = 6; |
| break; |
| default: |
| s->snoop_state = SNOOP_NONE; |
| } |
| break; |
| case (SNOOP_STRIPING): |
| case (SNOOP_NONE): |
| /* Once we hit the boring stuff - squelch debug noise */ |
| if (!debug_level) { |
| DB_PRINT_L(0, "squelching debug info ....\n"); |
| debug_level = 1; |
| } |
| break; |
| default: |
| s->snoop_state--; |
| } |
| DB_PRINT_L(debug_level, "final snoop state: %x\n", |
| (unsigned)s->snoop_state); |
| } |
| } |
| |
| static inline void rx_data_bytes(XilinxSPIPS *s, uint8_t *value, int max) |
| { |
| int i; |
| |
| for (i = 0; i < max && !fifo8_is_empty(&s->rx_fifo); ++i) { |
| value[i] = fifo8_pop(&s->rx_fifo); |
| } |
| } |
| |
| static uint64_t xilinx_spips_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| XilinxSPIPS *s = opaque; |
| uint32_t mask = ~0; |
| uint32_t ret; |
| uint8_t rx_buf[4]; |
| |
| addr >>= 2; |
| switch (addr) { |
| case R_CONFIG: |
| mask = ~(R_CONFIG_RSVD | MAN_START_COM); |
| break; |
| case R_INTR_STATUS: |
| ret = s->regs[addr] & IXR_ALL; |
| s->regs[addr] = 0; |
| DB_PRINT_L(0, "addr=" TARGET_FMT_plx " = %x\n", addr * 4, ret); |
| return ret; |
| case R_INTR_MASK: |
| mask = IXR_ALL; |
| break; |
| case R_EN: |
| mask = 0x1; |
| break; |
| case R_SLAVE_IDLE_COUNT: |
| mask = 0xFF; |
| break; |
| case R_MOD_ID: |
| mask = 0x01FFFFFF; |
| break; |
| case R_INTR_EN: |
| case R_INTR_DIS: |
| case R_TX_DATA: |
| mask = 0; |
| break; |
| case R_RX_DATA: |
| memset(rx_buf, 0, sizeof(rx_buf)); |
| rx_data_bytes(s, rx_buf, s->num_txrx_bytes); |
| ret = s->regs[R_CONFIG] & ENDIAN ? cpu_to_be32(*(uint32_t *)rx_buf) |
| : cpu_to_le32(*(uint32_t *)rx_buf); |
| DB_PRINT_L(0, "addr=" TARGET_FMT_plx " = %x\n", addr * 4, ret); |
| xilinx_spips_update_ixr(s); |
| return ret; |
| } |
| DB_PRINT_L(0, "addr=" TARGET_FMT_plx " = %x\n", addr * 4, |
| s->regs[addr] & mask); |
| return s->regs[addr] & mask; |
| |
| } |
| |
| static inline void tx_data_bytes(XilinxSPIPS *s, uint32_t value, int num) |
| { |
| int i; |
| for (i = 0; i < num && !fifo8_is_full(&s->tx_fifo); ++i) { |
| if (s->regs[R_CONFIG] & ENDIAN) { |
| fifo8_push(&s->tx_fifo, (uint8_t)(value >> 24)); |
| value <<= 8; |
| } else { |
| fifo8_push(&s->tx_fifo, (uint8_t)value); |
| value >>= 8; |
| } |
| } |
| } |
| |
| static void xilinx_spips_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| int mask = ~0; |
| int man_start_com = 0; |
| XilinxSPIPS *s = opaque; |
| |
| DB_PRINT_L(0, "addr=" TARGET_FMT_plx " = %x\n", addr, (unsigned)value); |
| addr >>= 2; |
| switch (addr) { |
| case R_CONFIG: |
| mask = ~(R_CONFIG_RSVD | MAN_START_COM); |
| if (value & MAN_START_COM) { |
| man_start_com = 1; |
| } |
| break; |
| case R_INTR_STATUS: |
| mask = IXR_ALL; |
| s->regs[R_INTR_STATUS] &= ~(mask & value); |
| goto no_reg_update; |
| case R_INTR_DIS: |
| mask = IXR_ALL; |
| s->regs[R_INTR_MASK] &= ~(mask & value); |
| goto no_reg_update; |
| case R_INTR_EN: |
| mask = IXR_ALL; |
| s->regs[R_INTR_MASK] |= mask & value; |
| goto no_reg_update; |
| case R_EN: |
| mask = 0x1; |
| break; |
| case R_SLAVE_IDLE_COUNT: |
| mask = 0xFF; |
| break; |
| case R_RX_DATA: |
| case R_INTR_MASK: |
| case R_MOD_ID: |
| mask = 0; |
| break; |
| case R_TX_DATA: |
| tx_data_bytes(s, (uint32_t)value, s->num_txrx_bytes); |
| goto no_reg_update; |
| case R_TXD1: |
| tx_data_bytes(s, (uint32_t)value, 1); |
| goto no_reg_update; |
| case R_TXD2: |
| tx_data_bytes(s, (uint32_t)value, 2); |
| goto no_reg_update; |
| case R_TXD3: |
| tx_data_bytes(s, (uint32_t)value, 3); |
| goto no_reg_update; |
| } |
| s->regs[addr] = (s->regs[addr] & ~mask) | (value & mask); |
| no_reg_update: |
| xilinx_spips_update_cs_lines(s); |
| if ((man_start_com && s->regs[R_CONFIG] & MAN_START_EN) || |
| (fifo8_is_empty(&s->tx_fifo) && s->regs[R_CONFIG] & MAN_START_EN)) { |
| xilinx_spips_flush_txfifo(s); |
| } |
| xilinx_spips_update_cs_lines(s); |
| xilinx_spips_update_ixr(s); |
| } |
| |
| static const MemoryRegionOps spips_ops = { |
| .read = xilinx_spips_read, |
| .write = xilinx_spips_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static void xilinx_qspips_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| XilinxQSPIPS *q = XILINX_QSPIPS(opaque); |
| |
| xilinx_spips_write(opaque, addr, value, size); |
| addr >>= 2; |
| |
| if (addr == R_LQSPI_CFG) { |
| q->lqspi_cached_addr = ~0ULL; |
| } |
| } |
| |
| static const MemoryRegionOps qspips_ops = { |
| .read = xilinx_spips_read, |
| .write = xilinx_qspips_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| #define LQSPI_CACHE_SIZE 1024 |
| |
| static uint64_t |
| lqspi_read(void *opaque, hwaddr addr, unsigned int size) |
| { |
| int i; |
| XilinxQSPIPS *q = opaque; |
| XilinxSPIPS *s = opaque; |
| uint32_t ret; |
| |
| if (addr >= q->lqspi_cached_addr && |
| addr <= q->lqspi_cached_addr + LQSPI_CACHE_SIZE - 4) { |
| uint8_t *retp = &q->lqspi_buf[addr - q->lqspi_cached_addr]; |
| ret = cpu_to_le32(*(uint32_t *)retp); |
| DB_PRINT_L(1, "addr: %08x, data: %08x\n", (unsigned)addr, |
| (unsigned)ret); |
| return ret; |
| } else { |
| int flash_addr = (addr / num_effective_busses(s)); |
| int slave = flash_addr >> LQSPI_ADDRESS_BITS; |
| int cache_entry = 0; |
| uint32_t u_page_save = s->regs[R_LQSPI_STS] & ~LQSPI_CFG_U_PAGE; |
| |
| s->regs[R_LQSPI_STS] &= ~LQSPI_CFG_U_PAGE; |
| s->regs[R_LQSPI_STS] |= slave ? LQSPI_CFG_U_PAGE : 0; |
| |
| DB_PRINT_L(0, "config reg status: %08x\n", s->regs[R_LQSPI_CFG]); |
| |
| fifo8_reset(&s->tx_fifo); |
| fifo8_reset(&s->rx_fifo); |
| |
| /* instruction */ |
| DB_PRINT_L(0, "pushing read instruction: %02x\n", |
| (unsigned)(uint8_t)(s->regs[R_LQSPI_CFG] & |
| LQSPI_CFG_INST_CODE)); |
| fifo8_push(&s->tx_fifo, s->regs[R_LQSPI_CFG] & LQSPI_CFG_INST_CODE); |
| /* read address */ |
| DB_PRINT_L(0, "pushing read address %06x\n", flash_addr); |
| fifo8_push(&s->tx_fifo, (uint8_t)(flash_addr >> 16)); |
| fifo8_push(&s->tx_fifo, (uint8_t)(flash_addr >> 8)); |
| fifo8_push(&s->tx_fifo, (uint8_t)flash_addr); |
| /* mode bits */ |
| if (s->regs[R_LQSPI_CFG] & LQSPI_CFG_MODE_EN) { |
| fifo8_push(&s->tx_fifo, extract32(s->regs[R_LQSPI_CFG], |
| LQSPI_CFG_MODE_SHIFT, |
| LQSPI_CFG_MODE_WIDTH)); |
| } |
| /* dummy bytes */ |
| for (i = 0; i < (extract32(s->regs[R_LQSPI_CFG], LQSPI_CFG_DUMMY_SHIFT, |
| LQSPI_CFG_DUMMY_WIDTH)); ++i) { |
| DB_PRINT_L(0, "pushing dummy byte\n"); |
| fifo8_push(&s->tx_fifo, 0); |
| } |
| xilinx_spips_update_cs_lines(s); |
| xilinx_spips_flush_txfifo(s); |
| fifo8_reset(&s->rx_fifo); |
| |
| DB_PRINT_L(0, "starting QSPI data read\n"); |
| |
| while (cache_entry < LQSPI_CACHE_SIZE) { |
| for (i = 0; i < 64; ++i) { |
| tx_data_bytes(s, 0, 1); |
| } |
| xilinx_spips_flush_txfifo(s); |
| for (i = 0; i < 64; ++i) { |
| rx_data_bytes(s, &q->lqspi_buf[cache_entry++], 1); |
| } |
| } |
| |
| s->regs[R_LQSPI_STS] &= ~LQSPI_CFG_U_PAGE; |
| s->regs[R_LQSPI_STS] |= u_page_save; |
| xilinx_spips_update_cs_lines(s); |
| |
| q->lqspi_cached_addr = flash_addr * num_effective_busses(s); |
| return lqspi_read(opaque, addr, size); |
| } |
| } |
| |
| static const MemoryRegionOps lqspi_ops = { |
| .read = lqspi_read, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .valid = { |
| .min_access_size = 1, |
| .max_access_size = 4 |
| } |
| }; |
| |
| static void xilinx_spips_realize(DeviceState *dev, Error **errp) |
| { |
| XilinxSPIPS *s = XILINX_SPIPS(dev); |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| XilinxSPIPSClass *xsc = XILINX_SPIPS_GET_CLASS(s); |
| qemu_irq *cs; |
| int i; |
| |
| DB_PRINT_L(0, "realized spips\n"); |
| |
| s->spi = g_new(SSIBus *, s->num_busses); |
| for (i = 0; i < s->num_busses; ++i) { |
| char bus_name[16]; |
| snprintf(bus_name, 16, "spi%d", i); |
| s->spi[i] = ssi_create_bus(dev, bus_name); |
| } |
| |
| s->cs_lines = g_new0(qemu_irq, s->num_cs * s->num_busses); |
| for (i = 0, cs = s->cs_lines; i < s->num_busses; ++i, cs += s->num_cs) { |
| ssi_auto_connect_slaves(DEVICE(s), cs, s->spi[i]); |
| } |
| |
| sysbus_init_irq(sbd, &s->irq); |
| for (i = 0; i < s->num_cs * s->num_busses; ++i) { |
| sysbus_init_irq(sbd, &s->cs_lines[i]); |
| } |
| |
| memory_region_init_io(&s->iomem, OBJECT(s), xsc->reg_ops, s, |
| "spi", XLNX_SPIPS_R_MAX * 4); |
| sysbus_init_mmio(sbd, &s->iomem); |
| |
| s->irqline = -1; |
| |
| fifo8_create(&s->rx_fifo, xsc->rx_fifo_size); |
| fifo8_create(&s->tx_fifo, xsc->tx_fifo_size); |
| } |
| |
| static void xilinx_qspips_realize(DeviceState *dev, Error **errp) |
| { |
| XilinxSPIPS *s = XILINX_SPIPS(dev); |
| XilinxQSPIPS *q = XILINX_QSPIPS(dev); |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| |
| DB_PRINT_L(0, "realized qspips\n"); |
| |
| s->num_busses = 2; |
| s->num_cs = 2; |
| s->num_txrx_bytes = 4; |
| |
| xilinx_spips_realize(dev, errp); |
| memory_region_init_io(&s->mmlqspi, OBJECT(s), &lqspi_ops, s, "lqspi", |
| (1 << LQSPI_ADDRESS_BITS) * 2); |
| sysbus_init_mmio(sbd, &s->mmlqspi); |
| |
| q->lqspi_cached_addr = ~0ULL; |
| } |
| |
| static int xilinx_spips_post_load(void *opaque, int version_id) |
| { |
| xilinx_spips_update_ixr((XilinxSPIPS *)opaque); |
| xilinx_spips_update_cs_lines((XilinxSPIPS *)opaque); |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_xilinx_spips = { |
| .name = "xilinx_spips", |
| .version_id = 2, |
| .minimum_version_id = 2, |
| .post_load = xilinx_spips_post_load, |
| .fields = (VMStateField[]) { |
| VMSTATE_FIFO8(tx_fifo, XilinxSPIPS), |
| VMSTATE_FIFO8(rx_fifo, XilinxSPIPS), |
| VMSTATE_UINT32_ARRAY(regs, XilinxSPIPS, XLNX_SPIPS_R_MAX), |
| VMSTATE_UINT8(snoop_state, XilinxSPIPS), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static Property xilinx_spips_properties[] = { |
| DEFINE_PROP_UINT8("num-busses", XilinxSPIPS, num_busses, 1), |
| DEFINE_PROP_UINT8("num-ss-bits", XilinxSPIPS, num_cs, 4), |
| DEFINE_PROP_UINT8("num-txrx-bytes", XilinxSPIPS, num_txrx_bytes, 1), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void xilinx_qspips_class_init(ObjectClass *klass, void * data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| XilinxSPIPSClass *xsc = XILINX_SPIPS_CLASS(klass); |
| |
| dc->realize = xilinx_qspips_realize; |
| xsc->reg_ops = &qspips_ops; |
| xsc->rx_fifo_size = RXFF_A_Q; |
| xsc->tx_fifo_size = TXFF_A_Q; |
| } |
| |
| static void xilinx_spips_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| XilinxSPIPSClass *xsc = XILINX_SPIPS_CLASS(klass); |
| |
| dc->realize = xilinx_spips_realize; |
| dc->reset = xilinx_spips_reset; |
| dc->props = xilinx_spips_properties; |
| dc->vmsd = &vmstate_xilinx_spips; |
| |
| xsc->reg_ops = &spips_ops; |
| xsc->rx_fifo_size = RXFF_A; |
| xsc->tx_fifo_size = TXFF_A; |
| } |
| |
| static const TypeInfo xilinx_spips_info = { |
| .name = TYPE_XILINX_SPIPS, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(XilinxSPIPS), |
| .class_init = xilinx_spips_class_init, |
| .class_size = sizeof(XilinxSPIPSClass), |
| }; |
| |
| static const TypeInfo xilinx_qspips_info = { |
| .name = TYPE_XILINX_QSPIPS, |
| .parent = TYPE_XILINX_SPIPS, |
| .instance_size = sizeof(XilinxQSPIPS), |
| .class_init = xilinx_qspips_class_init, |
| }; |
| |
| static void xilinx_spips_register_types(void) |
| { |
| type_register_static(&xilinx_spips_info); |
| type_register_static(&xilinx_qspips_info); |
| } |
| |
| type_init(xilinx_spips_register_types) |