| /* |
| * QEMU IDE Emulation: PCI VIA82C686B support. |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * Copyright (c) 2006 Openedhand Ltd. |
| * Copyright (c) 2010 Huacai Chen <zltjiangshi@gmail.com> |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "qemu/osdep.h" |
| #include "hw/hw.h" |
| #include "hw/i386/pc.h" |
| #include "hw/pci/pci.h" |
| #include "hw/isa/isa.h" |
| #include "sysemu/block-backend.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/dma.h" |
| |
| #include "hw/ide/pci.h" |
| |
| static uint64_t bmdma_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| BMDMAState *bm = opaque; |
| uint32_t val; |
| |
| if (size != 1) { |
| return ((uint64_t)1 << (size * 8)) - 1; |
| } |
| |
| switch (addr & 3) { |
| case 0: |
| val = bm->cmd; |
| break; |
| case 2: |
| val = bm->status; |
| break; |
| default: |
| val = 0xff; |
| break; |
| } |
| #ifdef DEBUG_IDE |
| printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val); |
| #endif |
| return val; |
| } |
| |
| static void bmdma_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| BMDMAState *bm = opaque; |
| |
| if (size != 1) { |
| return; |
| } |
| |
| #ifdef DEBUG_IDE |
| printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val); |
| #endif |
| switch (addr & 3) { |
| case 0: |
| bmdma_cmd_writeb(bm, val); |
| break; |
| case 2: |
| bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06); |
| break; |
| default:; |
| } |
| } |
| |
| static const MemoryRegionOps via_bmdma_ops = { |
| .read = bmdma_read, |
| .write = bmdma_write, |
| }; |
| |
| static void bmdma_setup_bar(PCIIDEState *d) |
| { |
| int i; |
| |
| memory_region_init(&d->bmdma_bar, OBJECT(d), "via-bmdma-container", 16); |
| for(i = 0;i < 2; i++) { |
| BMDMAState *bm = &d->bmdma[i]; |
| |
| memory_region_init_io(&bm->extra_io, OBJECT(d), &via_bmdma_ops, bm, |
| "via-bmdma", 4); |
| memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io); |
| memory_region_init_io(&bm->addr_ioport, OBJECT(d), |
| &bmdma_addr_ioport_ops, bm, "bmdma", 4); |
| memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport); |
| } |
| } |
| |
| static void via_reset(void *opaque) |
| { |
| PCIIDEState *d = opaque; |
| PCIDevice *pd = PCI_DEVICE(d); |
| uint8_t *pci_conf = pd->config; |
| int i; |
| |
| for (i = 0; i < 2; i++) { |
| ide_bus_reset(&d->bus[i]); |
| } |
| |
| pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_WAIT); |
| pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK | |
| PCI_STATUS_DEVSEL_MEDIUM); |
| |
| pci_set_long(pci_conf + PCI_BASE_ADDRESS_0, 0x000001f0); |
| pci_set_long(pci_conf + PCI_BASE_ADDRESS_1, 0x000003f4); |
| pci_set_long(pci_conf + PCI_BASE_ADDRESS_2, 0x00000170); |
| pci_set_long(pci_conf + PCI_BASE_ADDRESS_3, 0x00000374); |
| pci_set_long(pci_conf + PCI_BASE_ADDRESS_4, 0x0000cc01); /* BMIBA: 20-23h */ |
| pci_set_long(pci_conf + PCI_INTERRUPT_LINE, 0x0000010e); |
| |
| /* IDE chip enable, IDE configuration 1/2, IDE FIFO Configuration*/ |
| pci_set_long(pci_conf + 0x40, 0x0a090600); |
| /* IDE misc configuration 1/2/3 */ |
| pci_set_long(pci_conf + 0x44, 0x00c00068); |
| /* IDE Timing control */ |
| pci_set_long(pci_conf + 0x48, 0xa8a8a8a8); |
| /* IDE Address Setup Time */ |
| pci_set_long(pci_conf + 0x4c, 0x000000ff); |
| /* UltraDMA Extended Timing Control*/ |
| pci_set_long(pci_conf + 0x50, 0x07070707); |
| /* UltraDMA FIFO Control */ |
| pci_set_long(pci_conf + 0x54, 0x00000004); |
| /* IDE primary sector size */ |
| pci_set_long(pci_conf + 0x60, 0x00000200); |
| /* IDE secondary sector size */ |
| pci_set_long(pci_conf + 0x68, 0x00000200); |
| /* PCI PM Block */ |
| pci_set_long(pci_conf + 0xc0, 0x00020001); |
| } |
| |
| static void vt82c686b_init_ports(PCIIDEState *d) { |
| static const struct { |
| int iobase; |
| int iobase2; |
| int isairq; |
| } port_info[] = { |
| {0x1f0, 0x3f6, 14}, |
| {0x170, 0x376, 15}, |
| }; |
| int i; |
| |
| for (i = 0; i < 2; i++) { |
| ide_bus_new(&d->bus[i], sizeof(d->bus[i]), DEVICE(d), i, 2); |
| ide_init_ioport(&d->bus[i], NULL, port_info[i].iobase, |
| port_info[i].iobase2); |
| ide_init2(&d->bus[i], isa_get_irq(NULL, port_info[i].isairq)); |
| |
| bmdma_init(&d->bus[i], &d->bmdma[i], d); |
| d->bmdma[i].bus = &d->bus[i]; |
| ide_register_restart_cb(&d->bus[i]); |
| } |
| } |
| |
| /* via ide func */ |
| static void vt82c686b_ide_realize(PCIDevice *dev, Error **errp) |
| { |
| PCIIDEState *d = PCI_IDE(dev); |
| uint8_t *pci_conf = dev->config; |
| |
| pci_config_set_prog_interface(pci_conf, 0x8a); /* legacy ATA mode */ |
| pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0); |
| |
| qemu_register_reset(via_reset, d); |
| bmdma_setup_bar(d); |
| pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar); |
| |
| vmstate_register(DEVICE(dev), 0, &vmstate_ide_pci, d); |
| |
| vt82c686b_init_ports(d); |
| } |
| |
| static void vt82c686b_ide_exitfn(PCIDevice *dev) |
| { |
| PCIIDEState *d = PCI_IDE(dev); |
| unsigned i; |
| |
| for (i = 0; i < 2; ++i) { |
| memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io); |
| memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport); |
| } |
| } |
| |
| void vt82c686b_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn) |
| { |
| PCIDevice *dev; |
| |
| dev = pci_create_simple(bus, devfn, "via-ide"); |
| pci_ide_create_devs(dev, hd_table); |
| } |
| |
| static void via_ide_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->realize = vt82c686b_ide_realize; |
| k->exit = vt82c686b_ide_exitfn; |
| k->vendor_id = PCI_VENDOR_ID_VIA; |
| k->device_id = PCI_DEVICE_ID_VIA_IDE; |
| k->revision = 0x06; |
| k->class_id = PCI_CLASS_STORAGE_IDE; |
| set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); |
| } |
| |
| static const TypeInfo via_ide_info = { |
| .name = "via-ide", |
| .parent = TYPE_PCI_IDE, |
| .class_init = via_ide_class_init, |
| }; |
| |
| static void via_ide_register_types(void) |
| { |
| type_register_static(&via_ide_info); |
| } |
| |
| type_init(via_ide_register_types) |