| /* |
| * Raspberry Pi emulation (c) 2012 Gregory Estrade |
| * Refactoring for Pi2 Copyright (c) 2015, Microsoft. Written by Andrew Baumann. |
| * This code is licensed under the GNU GPLv2 and later. |
| * |
| * Heavily based on milkymist-vgafb.c, copyright terms below: |
| * QEMU model of the Milkymist VGA framebuffer. |
| * |
| * Copyright (c) 2010-2012 Michael Walle <michael@walle.cc> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| * |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "hw/display/bcm2835_fb.h" |
| #include "hw/display/framebuffer.h" |
| #include "ui/pixel_ops.h" |
| #include "hw/misc/bcm2835_mbox_defs.h" |
| #include "qemu/log.h" |
| |
| #define DEFAULT_VCRAM_SIZE 0x4000000 |
| #define BCM2835_FB_OFFSET 0x00100000 |
| |
| static void fb_invalidate_display(void *opaque) |
| { |
| BCM2835FBState *s = BCM2835_FB(opaque); |
| |
| s->invalidate = true; |
| } |
| |
| static void draw_line_src16(void *opaque, uint8_t *dst, const uint8_t *src, |
| int width, int deststep) |
| { |
| BCM2835FBState *s = opaque; |
| uint16_t rgb565; |
| uint32_t rgb888; |
| uint8_t r, g, b; |
| DisplaySurface *surface = qemu_console_surface(s->con); |
| int bpp = surface_bits_per_pixel(surface); |
| |
| while (width--) { |
| switch (s->bpp) { |
| case 8: |
| /* lookup palette starting at video ram base |
| * TODO: cache translation, rather than doing this each time! |
| */ |
| rgb888 = ldl_le_phys(&s->dma_as, s->vcram_base + (*src << 2)); |
| r = (rgb888 >> 0) & 0xff; |
| g = (rgb888 >> 8) & 0xff; |
| b = (rgb888 >> 16) & 0xff; |
| src++; |
| break; |
| case 16: |
| rgb565 = lduw_le_p(src); |
| r = ((rgb565 >> 11) & 0x1f) << 3; |
| g = ((rgb565 >> 5) & 0x3f) << 2; |
| b = ((rgb565 >> 0) & 0x1f) << 3; |
| src += 2; |
| break; |
| case 24: |
| rgb888 = ldl_le_p(src); |
| r = (rgb888 >> 0) & 0xff; |
| g = (rgb888 >> 8) & 0xff; |
| b = (rgb888 >> 16) & 0xff; |
| src += 3; |
| break; |
| case 32: |
| rgb888 = ldl_le_p(src); |
| r = (rgb888 >> 0) & 0xff; |
| g = (rgb888 >> 8) & 0xff; |
| b = (rgb888 >> 16) & 0xff; |
| src += 4; |
| break; |
| default: |
| r = 0; |
| g = 0; |
| b = 0; |
| break; |
| } |
| |
| if (s->pixo == 0) { |
| /* swap to BGR pixel format */ |
| uint8_t tmp = r; |
| r = b; |
| b = tmp; |
| } |
| |
| switch (bpp) { |
| case 8: |
| *dst++ = rgb_to_pixel8(r, g, b); |
| break; |
| case 15: |
| *(uint16_t *)dst = rgb_to_pixel15(r, g, b); |
| dst += 2; |
| break; |
| case 16: |
| *(uint16_t *)dst = rgb_to_pixel16(r, g, b); |
| dst += 2; |
| break; |
| case 24: |
| rgb888 = rgb_to_pixel24(r, g, b); |
| *dst++ = rgb888 & 0xff; |
| *dst++ = (rgb888 >> 8) & 0xff; |
| *dst++ = (rgb888 >> 16) & 0xff; |
| break; |
| case 32: |
| *(uint32_t *)dst = rgb_to_pixel32(r, g, b); |
| dst += 4; |
| break; |
| default: |
| return; |
| } |
| } |
| } |
| |
| static void fb_update_display(void *opaque) |
| { |
| BCM2835FBState *s = opaque; |
| DisplaySurface *surface = qemu_console_surface(s->con); |
| int first = 0; |
| int last = 0; |
| int src_width = 0; |
| int dest_width = 0; |
| |
| if (s->lock || !s->xres) { |
| return; |
| } |
| |
| src_width = s->xres * (s->bpp >> 3); |
| dest_width = s->xres; |
| |
| switch (surface_bits_per_pixel(surface)) { |
| case 0: |
| return; |
| case 8: |
| break; |
| case 15: |
| dest_width *= 2; |
| break; |
| case 16: |
| dest_width *= 2; |
| break; |
| case 24: |
| dest_width *= 3; |
| break; |
| case 32: |
| dest_width *= 4; |
| break; |
| default: |
| hw_error("bcm2835_fb: bad color depth\n"); |
| break; |
| } |
| |
| if (s->invalidate) { |
| framebuffer_update_memory_section(&s->fbsection, s->dma_mr, s->base, |
| s->yres, src_width); |
| } |
| |
| framebuffer_update_display(surface, &s->fbsection, s->xres, s->yres, |
| src_width, dest_width, 0, s->invalidate, |
| draw_line_src16, s, &first, &last); |
| |
| if (first >= 0) { |
| dpy_gfx_update(s->con, 0, first, s->xres, last - first + 1); |
| } |
| |
| s->invalidate = false; |
| } |
| |
| static void bcm2835_fb_mbox_push(BCM2835FBState *s, uint32_t value) |
| { |
| value &= ~0xf; |
| |
| s->lock = true; |
| |
| s->xres = ldl_le_phys(&s->dma_as, value); |
| s->yres = ldl_le_phys(&s->dma_as, value + 4); |
| s->xres_virtual = ldl_le_phys(&s->dma_as, value + 8); |
| s->yres_virtual = ldl_le_phys(&s->dma_as, value + 12); |
| s->bpp = ldl_le_phys(&s->dma_as, value + 20); |
| s->xoffset = ldl_le_phys(&s->dma_as, value + 24); |
| s->yoffset = ldl_le_phys(&s->dma_as, value + 28); |
| |
| s->base = s->vcram_base | (value & 0xc0000000); |
| s->base += BCM2835_FB_OFFSET; |
| |
| /* TODO - Manage properly virtual resolution */ |
| |
| s->pitch = s->xres * (s->bpp >> 3); |
| s->size = s->yres * s->pitch; |
| |
| stl_le_phys(&s->dma_as, value + 16, s->pitch); |
| stl_le_phys(&s->dma_as, value + 32, s->base); |
| stl_le_phys(&s->dma_as, value + 36, s->size); |
| |
| s->invalidate = true; |
| qemu_console_resize(s->con, s->xres, s->yres); |
| s->lock = false; |
| } |
| |
| void bcm2835_fb_reconfigure(BCM2835FBState *s, uint32_t *xres, uint32_t *yres, |
| uint32_t *xoffset, uint32_t *yoffset, uint32_t *bpp, |
| uint32_t *pixo, uint32_t *alpha) |
| { |
| s->lock = true; |
| |
| /* TODO: input validation! */ |
| if (xres) { |
| s->xres = *xres; |
| } |
| if (yres) { |
| s->yres = *yres; |
| } |
| if (xoffset) { |
| s->xoffset = *xoffset; |
| } |
| if (yoffset) { |
| s->yoffset = *yoffset; |
| } |
| if (bpp) { |
| s->bpp = *bpp; |
| } |
| if (pixo) { |
| s->pixo = *pixo; |
| } |
| if (alpha) { |
| s->alpha = *alpha; |
| } |
| |
| /* TODO - Manage properly virtual resolution */ |
| |
| s->pitch = s->xres * (s->bpp >> 3); |
| s->size = s->yres * s->pitch; |
| |
| s->invalidate = true; |
| qemu_console_resize(s->con, s->xres, s->yres); |
| s->lock = false; |
| } |
| |
| static uint64_t bcm2835_fb_read(void *opaque, hwaddr offset, unsigned size) |
| { |
| BCM2835FBState *s = opaque; |
| uint32_t res = 0; |
| |
| switch (offset) { |
| case MBOX_AS_DATA: |
| res = MBOX_CHAN_FB; |
| s->pending = false; |
| qemu_set_irq(s->mbox_irq, 0); |
| break; |
| |
| case MBOX_AS_PENDING: |
| res = s->pending; |
| break; |
| |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", |
| __func__, offset); |
| return 0; |
| } |
| |
| return res; |
| } |
| |
| static void bcm2835_fb_write(void *opaque, hwaddr offset, uint64_t value, |
| unsigned size) |
| { |
| BCM2835FBState *s = opaque; |
| |
| switch (offset) { |
| case MBOX_AS_DATA: |
| /* bcm2835_mbox should check our pending status before pushing */ |
| assert(!s->pending); |
| s->pending = true; |
| bcm2835_fb_mbox_push(s, value); |
| qemu_set_irq(s->mbox_irq, 1); |
| break; |
| |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", |
| __func__, offset); |
| return; |
| } |
| } |
| |
| static const MemoryRegionOps bcm2835_fb_ops = { |
| .read = bcm2835_fb_read, |
| .write = bcm2835_fb_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .valid.min_access_size = 4, |
| .valid.max_access_size = 4, |
| }; |
| |
| static const VMStateDescription vmstate_bcm2835_fb = { |
| .name = TYPE_BCM2835_FB, |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_BOOL(lock, BCM2835FBState), |
| VMSTATE_BOOL(invalidate, BCM2835FBState), |
| VMSTATE_BOOL(pending, BCM2835FBState), |
| VMSTATE_UINT32(xres, BCM2835FBState), |
| VMSTATE_UINT32(yres, BCM2835FBState), |
| VMSTATE_UINT32(xres_virtual, BCM2835FBState), |
| VMSTATE_UINT32(yres_virtual, BCM2835FBState), |
| VMSTATE_UINT32(xoffset, BCM2835FBState), |
| VMSTATE_UINT32(yoffset, BCM2835FBState), |
| VMSTATE_UINT32(bpp, BCM2835FBState), |
| VMSTATE_UINT32(base, BCM2835FBState), |
| VMSTATE_UINT32(pitch, BCM2835FBState), |
| VMSTATE_UINT32(size, BCM2835FBState), |
| VMSTATE_UINT32(pixo, BCM2835FBState), |
| VMSTATE_UINT32(alpha, BCM2835FBState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const GraphicHwOps vgafb_ops = { |
| .invalidate = fb_invalidate_display, |
| .gfx_update = fb_update_display, |
| }; |
| |
| static void bcm2835_fb_init(Object *obj) |
| { |
| BCM2835FBState *s = BCM2835_FB(obj); |
| |
| memory_region_init_io(&s->iomem, obj, &bcm2835_fb_ops, s, TYPE_BCM2835_FB, |
| 0x10); |
| sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem); |
| sysbus_init_irq(SYS_BUS_DEVICE(s), &s->mbox_irq); |
| } |
| |
| static void bcm2835_fb_reset(DeviceState *dev) |
| { |
| BCM2835FBState *s = BCM2835_FB(dev); |
| |
| s->pending = false; |
| |
| s->xres_virtual = s->xres; |
| s->yres_virtual = s->yres; |
| s->xoffset = 0; |
| s->yoffset = 0; |
| s->base = s->vcram_base + BCM2835_FB_OFFSET; |
| s->pitch = s->xres * (s->bpp >> 3); |
| s->size = s->yres * s->pitch; |
| |
| s->invalidate = true; |
| s->lock = false; |
| } |
| |
| static void bcm2835_fb_realize(DeviceState *dev, Error **errp) |
| { |
| BCM2835FBState *s = BCM2835_FB(dev); |
| Error *err = NULL; |
| Object *obj; |
| |
| if (s->vcram_base == 0) { |
| error_setg(errp, "%s: required vcram-base property not set", __func__); |
| return; |
| } |
| |
| obj = object_property_get_link(OBJECT(dev), "dma-mr", &err); |
| if (obj == NULL) { |
| error_setg(errp, "%s: required dma-mr link not found: %s", |
| __func__, error_get_pretty(err)); |
| return; |
| } |
| |
| s->dma_mr = MEMORY_REGION(obj); |
| address_space_init(&s->dma_as, s->dma_mr, NULL); |
| |
| bcm2835_fb_reset(dev); |
| |
| s->con = graphic_console_init(dev, 0, &vgafb_ops, s); |
| qemu_console_resize(s->con, s->xres, s->yres); |
| } |
| |
| static Property bcm2835_fb_props[] = { |
| DEFINE_PROP_UINT32("vcram-base", BCM2835FBState, vcram_base, 0),/*required*/ |
| DEFINE_PROP_UINT32("vcram-size", BCM2835FBState, vcram_size, |
| DEFAULT_VCRAM_SIZE), |
| DEFINE_PROP_UINT32("xres", BCM2835FBState, xres, 640), |
| DEFINE_PROP_UINT32("yres", BCM2835FBState, yres, 480), |
| DEFINE_PROP_UINT32("bpp", BCM2835FBState, bpp, 16), |
| DEFINE_PROP_UINT32("pixo", BCM2835FBState, pixo, 1), /* 1=RGB, 0=BGR */ |
| DEFINE_PROP_UINT32("alpha", BCM2835FBState, alpha, 2), /* alpha ignored */ |
| DEFINE_PROP_END_OF_LIST() |
| }; |
| |
| static void bcm2835_fb_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->props = bcm2835_fb_props; |
| dc->realize = bcm2835_fb_realize; |
| dc->reset = bcm2835_fb_reset; |
| dc->vmsd = &vmstate_bcm2835_fb; |
| } |
| |
| static TypeInfo bcm2835_fb_info = { |
| .name = TYPE_BCM2835_FB, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(BCM2835FBState), |
| .class_init = bcm2835_fb_class_init, |
| .instance_init = bcm2835_fb_init, |
| }; |
| |
| static void bcm2835_fb_register_types(void) |
| { |
| type_register_static(&bcm2835_fb_info); |
| } |
| |
| type_init(bcm2835_fb_register_types) |