| /* |
| * vhost-vdpa.c |
| * |
| * Copyright(c) 2017-2018 Intel Corporation. |
| * Copyright(c) 2020 Red Hat, Inc. |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| * |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "clients.h" |
| #include "hw/virtio/virtio-net.h" |
| #include "net/vhost_net.h" |
| #include "net/vhost-vdpa.h" |
| #include "hw/virtio/vhost-vdpa.h" |
| #include "qemu/config-file.h" |
| #include "qemu/error-report.h" |
| #include "qemu/log.h" |
| #include "qemu/memalign.h" |
| #include "qemu/option.h" |
| #include "qapi/error.h" |
| #include <linux/vhost.h> |
| #include <sys/ioctl.h> |
| #include <err.h> |
| #include "standard-headers/linux/virtio_net.h" |
| #include "monitor/monitor.h" |
| #include "migration/misc.h" |
| #include "hw/virtio/vhost.h" |
| #include "trace.h" |
| |
| /* Todo:need to add the multiqueue support here */ |
| typedef struct VhostVDPAState { |
| NetClientState nc; |
| struct vhost_vdpa vhost_vdpa; |
| NotifierWithReturn migration_state; |
| VHostNetState *vhost_net; |
| |
| /* Control commands shadow buffers */ |
| void *cvq_cmd_out_buffer; |
| virtio_net_ctrl_ack *status; |
| |
| /* The device always have SVQ enabled */ |
| bool always_svq; |
| |
| /* The device can isolate CVQ in its own ASID */ |
| bool cvq_isolated; |
| |
| bool started; |
| } VhostVDPAState; |
| |
| /* |
| * The array is sorted alphabetically in ascending order, |
| * with the exception of VHOST_INVALID_FEATURE_BIT, |
| * which should always be the last entry. |
| */ |
| const int vdpa_feature_bits[] = { |
| VIRTIO_F_ANY_LAYOUT, |
| VIRTIO_F_IOMMU_PLATFORM, |
| VIRTIO_F_NOTIFY_ON_EMPTY, |
| VIRTIO_F_RING_PACKED, |
| VIRTIO_F_RING_RESET, |
| VIRTIO_F_VERSION_1, |
| VIRTIO_F_IN_ORDER, |
| VIRTIO_F_NOTIFICATION_DATA, |
| VIRTIO_NET_F_CSUM, |
| VIRTIO_NET_F_CTRL_GUEST_OFFLOADS, |
| VIRTIO_NET_F_CTRL_MAC_ADDR, |
| VIRTIO_NET_F_CTRL_RX, |
| VIRTIO_NET_F_CTRL_RX_EXTRA, |
| VIRTIO_NET_F_CTRL_VLAN, |
| VIRTIO_NET_F_CTRL_VQ, |
| VIRTIO_NET_F_GSO, |
| VIRTIO_NET_F_GUEST_CSUM, |
| VIRTIO_NET_F_GUEST_ECN, |
| VIRTIO_NET_F_GUEST_TSO4, |
| VIRTIO_NET_F_GUEST_TSO6, |
| VIRTIO_NET_F_GUEST_UFO, |
| VIRTIO_NET_F_GUEST_USO4, |
| VIRTIO_NET_F_GUEST_USO6, |
| VIRTIO_NET_F_HASH_REPORT, |
| VIRTIO_NET_F_HOST_ECN, |
| VIRTIO_NET_F_HOST_TSO4, |
| VIRTIO_NET_F_HOST_TSO6, |
| VIRTIO_NET_F_HOST_UFO, |
| VIRTIO_NET_F_HOST_USO, |
| VIRTIO_NET_F_MQ, |
| VIRTIO_NET_F_MRG_RXBUF, |
| VIRTIO_NET_F_MTU, |
| VIRTIO_NET_F_RSC_EXT, |
| VIRTIO_NET_F_RSS, |
| VIRTIO_NET_F_STATUS, |
| VIRTIO_RING_F_EVENT_IDX, |
| VIRTIO_RING_F_INDIRECT_DESC, |
| |
| /* VHOST_INVALID_FEATURE_BIT should always be the last entry */ |
| VHOST_INVALID_FEATURE_BIT |
| }; |
| |
| /** Supported device specific feature bits with SVQ */ |
| static const uint64_t vdpa_svq_device_features = |
| BIT_ULL(VIRTIO_NET_F_CSUM) | |
| BIT_ULL(VIRTIO_NET_F_GUEST_CSUM) | |
| BIT_ULL(VIRTIO_NET_F_CTRL_GUEST_OFFLOADS) | |
| BIT_ULL(VIRTIO_NET_F_MTU) | |
| BIT_ULL(VIRTIO_NET_F_MAC) | |
| BIT_ULL(VIRTIO_NET_F_GUEST_TSO4) | |
| BIT_ULL(VIRTIO_NET_F_GUEST_TSO6) | |
| BIT_ULL(VIRTIO_NET_F_GUEST_ECN) | |
| BIT_ULL(VIRTIO_NET_F_GUEST_UFO) | |
| BIT_ULL(VIRTIO_NET_F_HOST_TSO4) | |
| BIT_ULL(VIRTIO_NET_F_HOST_TSO6) | |
| BIT_ULL(VIRTIO_NET_F_HOST_ECN) | |
| BIT_ULL(VIRTIO_NET_F_HOST_UFO) | |
| BIT_ULL(VIRTIO_NET_F_MRG_RXBUF) | |
| BIT_ULL(VIRTIO_NET_F_STATUS) | |
| BIT_ULL(VIRTIO_NET_F_CTRL_VQ) | |
| BIT_ULL(VIRTIO_NET_F_CTRL_RX) | |
| BIT_ULL(VIRTIO_NET_F_CTRL_VLAN) | |
| BIT_ULL(VIRTIO_NET_F_CTRL_RX_EXTRA) | |
| BIT_ULL(VIRTIO_NET_F_MQ) | |
| BIT_ULL(VIRTIO_F_ANY_LAYOUT) | |
| BIT_ULL(VIRTIO_NET_F_CTRL_MAC_ADDR) | |
| /* VHOST_F_LOG_ALL is exposed by SVQ */ |
| BIT_ULL(VHOST_F_LOG_ALL) | |
| BIT_ULL(VIRTIO_NET_F_HASH_REPORT) | |
| BIT_ULL(VIRTIO_NET_F_RSS) | |
| BIT_ULL(VIRTIO_NET_F_RSC_EXT) | |
| BIT_ULL(VIRTIO_NET_F_STANDBY) | |
| BIT_ULL(VIRTIO_NET_F_SPEED_DUPLEX); |
| |
| #define VHOST_VDPA_NET_CVQ_ASID 1 |
| |
| VHostNetState *vhost_vdpa_get_vhost_net(NetClientState *nc) |
| { |
| VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc); |
| assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA); |
| return s->vhost_net; |
| } |
| |
| static size_t vhost_vdpa_net_cvq_cmd_len(void) |
| { |
| /* |
| * MAC_TABLE_SET is the ctrl command that produces the longer out buffer. |
| * In buffer is always 1 byte, so it should fit here |
| */ |
| return sizeof(struct virtio_net_ctrl_hdr) + |
| 2 * sizeof(struct virtio_net_ctrl_mac) + |
| MAC_TABLE_ENTRIES * ETH_ALEN; |
| } |
| |
| static size_t vhost_vdpa_net_cvq_cmd_page_len(void) |
| { |
| return ROUND_UP(vhost_vdpa_net_cvq_cmd_len(), qemu_real_host_page_size()); |
| } |
| |
| static bool vhost_vdpa_net_valid_svq_features(uint64_t features, Error **errp) |
| { |
| uint64_t invalid_dev_features = |
| features & ~vdpa_svq_device_features & |
| /* Transport are all accepted at this point */ |
| ~MAKE_64BIT_MASK(VIRTIO_TRANSPORT_F_START, |
| VIRTIO_TRANSPORT_F_END - VIRTIO_TRANSPORT_F_START); |
| |
| if (invalid_dev_features) { |
| error_setg(errp, "vdpa svq does not work with features 0x%" PRIx64, |
| invalid_dev_features); |
| return false; |
| } |
| |
| return vhost_svq_valid_features(features, errp); |
| } |
| |
| static int vhost_vdpa_net_check_device_id(struct vhost_net *net) |
| { |
| uint32_t device_id; |
| int ret; |
| struct vhost_dev *hdev; |
| |
| hdev = (struct vhost_dev *)&net->dev; |
| ret = hdev->vhost_ops->vhost_get_device_id(hdev, &device_id); |
| if (device_id != VIRTIO_ID_NET) { |
| return -ENOTSUP; |
| } |
| return ret; |
| } |
| |
| static int vhost_vdpa_add(NetClientState *ncs, void *be, |
| int queue_pair_index, int nvqs) |
| { |
| VhostNetOptions options; |
| struct vhost_net *net = NULL; |
| VhostVDPAState *s; |
| int ret; |
| |
| options.backend_type = VHOST_BACKEND_TYPE_VDPA; |
| assert(ncs->info->type == NET_CLIENT_DRIVER_VHOST_VDPA); |
| s = DO_UPCAST(VhostVDPAState, nc, ncs); |
| options.net_backend = ncs; |
| options.opaque = be; |
| options.busyloop_timeout = 0; |
| options.nvqs = nvqs; |
| |
| net = vhost_net_init(&options); |
| if (!net) { |
| error_report("failed to init vhost_net for queue"); |
| goto err_init; |
| } |
| s->vhost_net = net; |
| ret = vhost_vdpa_net_check_device_id(net); |
| if (ret) { |
| goto err_check; |
| } |
| return 0; |
| err_check: |
| vhost_net_cleanup(net); |
| g_free(net); |
| err_init: |
| return -1; |
| } |
| |
| static void vhost_vdpa_cleanup(NetClientState *nc) |
| { |
| VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc); |
| |
| /* |
| * If a peer NIC is attached, do not cleanup anything. |
| * Cleanup will happen as a part of qemu_cleanup() -> net_cleanup() |
| * when the guest is shutting down. |
| */ |
| if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_NIC) { |
| return; |
| } |
| munmap(s->cvq_cmd_out_buffer, vhost_vdpa_net_cvq_cmd_page_len()); |
| munmap(s->status, vhost_vdpa_net_cvq_cmd_page_len()); |
| if (s->vhost_net) { |
| vhost_net_cleanup(s->vhost_net); |
| g_free(s->vhost_net); |
| s->vhost_net = NULL; |
| } |
| if (s->vhost_vdpa.index != 0) { |
| return; |
| } |
| qemu_close(s->vhost_vdpa.shared->device_fd); |
| g_free(s->vhost_vdpa.shared); |
| } |
| |
| /** Dummy SetSteeringEBPF to support RSS for vhost-vdpa backend */ |
| static bool vhost_vdpa_set_steering_ebpf(NetClientState *nc, int prog_fd) |
| { |
| return true; |
| } |
| |
| static bool vhost_vdpa_has_vnet_hdr(NetClientState *nc) |
| { |
| assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA); |
| |
| return true; |
| } |
| |
| static bool vhost_vdpa_has_ufo(NetClientState *nc) |
| { |
| assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA); |
| VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc); |
| uint64_t features = 0; |
| features |= (1ULL << VIRTIO_NET_F_HOST_UFO); |
| features = vhost_net_get_features(s->vhost_net, features); |
| return !!(features & (1ULL << VIRTIO_NET_F_HOST_UFO)); |
| |
| } |
| |
| static bool vhost_vdpa_check_peer_type(NetClientState *nc, ObjectClass *oc, |
| Error **errp) |
| { |
| const char *driver = object_class_get_name(oc); |
| |
| if (!g_str_has_prefix(driver, "virtio-net-")) { |
| error_setg(errp, "vhost-vdpa requires frontend driver virtio-net-*"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /** Dummy receive in case qemu falls back to userland tap networking */ |
| static ssize_t vhost_vdpa_receive(NetClientState *nc, const uint8_t *buf, |
| size_t size) |
| { |
| return size; |
| } |
| |
| |
| /** From any vdpa net client, get the netclient of the i-th queue pair */ |
| static VhostVDPAState *vhost_vdpa_net_get_nc_vdpa(VhostVDPAState *s, int i) |
| { |
| NICState *nic = qemu_get_nic(s->nc.peer); |
| NetClientState *nc_i = qemu_get_peer(nic->ncs, i); |
| |
| return DO_UPCAST(VhostVDPAState, nc, nc_i); |
| } |
| |
| static VhostVDPAState *vhost_vdpa_net_first_nc_vdpa(VhostVDPAState *s) |
| { |
| return vhost_vdpa_net_get_nc_vdpa(s, 0); |
| } |
| |
| static void vhost_vdpa_net_log_global_enable(VhostVDPAState *s, bool enable) |
| { |
| struct vhost_vdpa *v = &s->vhost_vdpa; |
| VirtIONet *n; |
| VirtIODevice *vdev; |
| int data_queue_pairs, cvq, r; |
| |
| /* We are only called on the first data vqs and only if x-svq is not set */ |
| if (s->vhost_vdpa.shadow_vqs_enabled == enable) { |
| return; |
| } |
| |
| vdev = v->dev->vdev; |
| n = VIRTIO_NET(vdev); |
| if (!n->vhost_started) { |
| return; |
| } |
| |
| data_queue_pairs = n->multiqueue ? n->max_queue_pairs : 1; |
| cvq = virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ) ? |
| n->max_ncs - n->max_queue_pairs : 0; |
| v->shared->svq_switching = enable ? |
| SVQ_TSTATE_ENABLING : SVQ_TSTATE_DISABLING; |
| /* |
| * TODO: vhost_net_stop does suspend, get_base and reset. We can be smarter |
| * in the future and resume the device if read-only operations between |
| * suspend and reset goes wrong. |
| */ |
| vhost_net_stop(vdev, n->nic->ncs, data_queue_pairs, cvq); |
| |
| /* Start will check migration setup_or_active to configure or not SVQ */ |
| r = vhost_net_start(vdev, n->nic->ncs, data_queue_pairs, cvq); |
| if (unlikely(r < 0)) { |
| error_report("unable to start vhost net: %s(%d)", g_strerror(-r), -r); |
| } |
| v->shared->svq_switching = SVQ_TSTATE_DONE; |
| } |
| |
| static int vdpa_net_migration_state_notifier(NotifierWithReturn *notifier, |
| MigrationEvent *e, Error **errp) |
| { |
| VhostVDPAState *s = container_of(notifier, VhostVDPAState, migration_state); |
| |
| if (e->type == MIG_EVENT_PRECOPY_SETUP) { |
| vhost_vdpa_net_log_global_enable(s, true); |
| } else if (e->type == MIG_EVENT_PRECOPY_FAILED) { |
| vhost_vdpa_net_log_global_enable(s, false); |
| } |
| return 0; |
| } |
| |
| static void vhost_vdpa_net_data_start_first(VhostVDPAState *s) |
| { |
| struct vhost_vdpa *v = &s->vhost_vdpa; |
| |
| migration_add_notifier(&s->migration_state, |
| vdpa_net_migration_state_notifier); |
| if (v->shadow_vqs_enabled) { |
| v->shared->iova_tree = vhost_iova_tree_new(v->shared->iova_range.first, |
| v->shared->iova_range.last); |
| } |
| } |
| |
| static int vhost_vdpa_net_data_start(NetClientState *nc) |
| { |
| VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc); |
| struct vhost_vdpa *v = &s->vhost_vdpa; |
| |
| assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA); |
| |
| if (s->always_svq || |
| migration_is_setup_or_active()) { |
| v->shadow_vqs_enabled = true; |
| } else { |
| v->shadow_vqs_enabled = false; |
| } |
| |
| if (v->index == 0) { |
| v->shared->shadow_data = v->shadow_vqs_enabled; |
| vhost_vdpa_net_data_start_first(s); |
| return 0; |
| } |
| |
| return 0; |
| } |
| |
| static int vhost_vdpa_net_data_load(NetClientState *nc) |
| { |
| VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc); |
| struct vhost_vdpa *v = &s->vhost_vdpa; |
| bool has_cvq = v->dev->vq_index_end % 2; |
| |
| if (has_cvq) { |
| return 0; |
| } |
| |
| for (int i = 0; i < v->dev->nvqs; ++i) { |
| int ret = vhost_vdpa_set_vring_ready(v, i + v->dev->vq_index); |
| if (ret < 0) { |
| return ret; |
| } |
| } |
| return 0; |
| } |
| |
| static void vhost_vdpa_net_client_stop(NetClientState *nc) |
| { |
| VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc); |
| struct vhost_dev *dev; |
| |
| assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA); |
| |
| if (s->vhost_vdpa.index == 0) { |
| migration_remove_notifier(&s->migration_state); |
| } |
| |
| dev = s->vhost_vdpa.dev; |
| if (dev->vq_index + dev->nvqs == dev->vq_index_end) { |
| g_clear_pointer(&s->vhost_vdpa.shared->iova_tree, |
| vhost_iova_tree_delete); |
| } |
| } |
| |
| static NetClientInfo net_vhost_vdpa_info = { |
| .type = NET_CLIENT_DRIVER_VHOST_VDPA, |
| .size = sizeof(VhostVDPAState), |
| .receive = vhost_vdpa_receive, |
| .start = vhost_vdpa_net_data_start, |
| .load = vhost_vdpa_net_data_load, |
| .stop = vhost_vdpa_net_client_stop, |
| .cleanup = vhost_vdpa_cleanup, |
| .has_vnet_hdr = vhost_vdpa_has_vnet_hdr, |
| .has_ufo = vhost_vdpa_has_ufo, |
| .check_peer_type = vhost_vdpa_check_peer_type, |
| .set_steering_ebpf = vhost_vdpa_set_steering_ebpf, |
| }; |
| |
| static int64_t vhost_vdpa_get_vring_group(int device_fd, unsigned vq_index, |
| Error **errp) |
| { |
| struct vhost_vring_state state = { |
| .index = vq_index, |
| }; |
| int r = ioctl(device_fd, VHOST_VDPA_GET_VRING_GROUP, &state); |
| |
| if (unlikely(r < 0)) { |
| r = -errno; |
| error_setg_errno(errp, errno, "Cannot get VQ %u group", vq_index); |
| return r; |
| } |
| |
| return state.num; |
| } |
| |
| static int vhost_vdpa_set_address_space_id(struct vhost_vdpa *v, |
| unsigned vq_group, |
| unsigned asid_num) |
| { |
| struct vhost_vring_state asid = { |
| .index = vq_group, |
| .num = asid_num, |
| }; |
| int r; |
| |
| trace_vhost_vdpa_set_address_space_id(v, vq_group, asid_num); |
| |
| r = ioctl(v->shared->device_fd, VHOST_VDPA_SET_GROUP_ASID, &asid); |
| if (unlikely(r < 0)) { |
| error_report("Can't set vq group %u asid %u, errno=%d (%s)", |
| asid.index, asid.num, errno, g_strerror(errno)); |
| } |
| return r; |
| } |
| |
| static void vhost_vdpa_cvq_unmap_buf(struct vhost_vdpa *v, void *addr) |
| { |
| VhostIOVATree *tree = v->shared->iova_tree; |
| DMAMap needle = { |
| /* |
| * No need to specify size or to look for more translations since |
| * this contiguous chunk was allocated by us. |
| */ |
| .translated_addr = (hwaddr)(uintptr_t)addr, |
| }; |
| const DMAMap *map = vhost_iova_tree_find_iova(tree, &needle); |
| int r; |
| |
| if (unlikely(!map)) { |
| error_report("Cannot locate expected map"); |
| return; |
| } |
| |
| r = vhost_vdpa_dma_unmap(v->shared, v->address_space_id, map->iova, |
| map->size + 1); |
| if (unlikely(r != 0)) { |
| error_report("Device cannot unmap: %s(%d)", g_strerror(r), r); |
| } |
| |
| vhost_iova_tree_remove(tree, *map); |
| } |
| |
| /** Map CVQ buffer. */ |
| static int vhost_vdpa_cvq_map_buf(struct vhost_vdpa *v, void *buf, size_t size, |
| bool write) |
| { |
| DMAMap map = {}; |
| int r; |
| |
| map.translated_addr = (hwaddr)(uintptr_t)buf; |
| map.size = size - 1; |
| map.perm = write ? IOMMU_RW : IOMMU_RO, |
| r = vhost_iova_tree_map_alloc(v->shared->iova_tree, &map); |
| if (unlikely(r != IOVA_OK)) { |
| error_report("Cannot map injected element"); |
| return r; |
| } |
| |
| r = vhost_vdpa_dma_map(v->shared, v->address_space_id, map.iova, |
| vhost_vdpa_net_cvq_cmd_page_len(), buf, !write); |
| if (unlikely(r < 0)) { |
| goto dma_map_err; |
| } |
| |
| return 0; |
| |
| dma_map_err: |
| vhost_iova_tree_remove(v->shared->iova_tree, map); |
| return r; |
| } |
| |
| static int vhost_vdpa_net_cvq_start(NetClientState *nc) |
| { |
| VhostVDPAState *s, *s0; |
| struct vhost_vdpa *v; |
| int64_t cvq_group; |
| int r; |
| Error *err = NULL; |
| |
| assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA); |
| |
| s = DO_UPCAST(VhostVDPAState, nc, nc); |
| v = &s->vhost_vdpa; |
| |
| s0 = vhost_vdpa_net_first_nc_vdpa(s); |
| v->shadow_vqs_enabled = s0->vhost_vdpa.shadow_vqs_enabled; |
| s->vhost_vdpa.address_space_id = VHOST_VDPA_GUEST_PA_ASID; |
| |
| if (v->shared->shadow_data) { |
| /* SVQ is already configured for all virtqueues */ |
| goto out; |
| } |
| |
| /* |
| * If we early return in these cases SVQ will not be enabled. The migration |
| * will be blocked as long as vhost-vdpa backends will not offer _F_LOG. |
| */ |
| if (!vhost_vdpa_net_valid_svq_features(v->dev->features, NULL)) { |
| return 0; |
| } |
| |
| if (!s->cvq_isolated) { |
| return 0; |
| } |
| |
| cvq_group = vhost_vdpa_get_vring_group(v->shared->device_fd, |
| v->dev->vq_index_end - 1, |
| &err); |
| if (unlikely(cvq_group < 0)) { |
| error_report_err(err); |
| return cvq_group; |
| } |
| |
| r = vhost_vdpa_set_address_space_id(v, cvq_group, VHOST_VDPA_NET_CVQ_ASID); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| |
| v->shadow_vqs_enabled = true; |
| s->vhost_vdpa.address_space_id = VHOST_VDPA_NET_CVQ_ASID; |
| |
| out: |
| if (!s->vhost_vdpa.shadow_vqs_enabled) { |
| return 0; |
| } |
| |
| /* |
| * If other vhost_vdpa already have an iova_tree, reuse it for simplicity, |
| * whether CVQ shares ASID with guest or not, because: |
| * - Memory listener need access to guest's memory addresses allocated in |
| * the IOVA tree. |
| * - There should be plenty of IOVA address space for both ASID not to |
| * worry about collisions between them. Guest's translations are still |
| * validated with virtio virtqueue_pop so there is no risk for the guest |
| * to access memory that it shouldn't. |
| * |
| * To allocate a iova tree per ASID is doable but it complicates the code |
| * and it is not worth it for the moment. |
| */ |
| if (!v->shared->iova_tree) { |
| v->shared->iova_tree = vhost_iova_tree_new(v->shared->iova_range.first, |
| v->shared->iova_range.last); |
| } |
| |
| r = vhost_vdpa_cvq_map_buf(&s->vhost_vdpa, s->cvq_cmd_out_buffer, |
| vhost_vdpa_net_cvq_cmd_page_len(), false); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| |
| r = vhost_vdpa_cvq_map_buf(&s->vhost_vdpa, s->status, |
| vhost_vdpa_net_cvq_cmd_page_len(), true); |
| if (unlikely(r < 0)) { |
| vhost_vdpa_cvq_unmap_buf(&s->vhost_vdpa, s->cvq_cmd_out_buffer); |
| } |
| |
| return r; |
| } |
| |
| static void vhost_vdpa_net_cvq_stop(NetClientState *nc) |
| { |
| VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc); |
| |
| assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA); |
| |
| if (s->vhost_vdpa.shadow_vqs_enabled) { |
| vhost_vdpa_cvq_unmap_buf(&s->vhost_vdpa, s->cvq_cmd_out_buffer); |
| vhost_vdpa_cvq_unmap_buf(&s->vhost_vdpa, s->status); |
| } |
| |
| vhost_vdpa_net_client_stop(nc); |
| } |
| |
| static ssize_t vhost_vdpa_net_cvq_add(VhostVDPAState *s, |
| const struct iovec *out_sg, size_t out_num, |
| const struct iovec *in_sg, size_t in_num) |
| { |
| VhostShadowVirtqueue *svq = g_ptr_array_index(s->vhost_vdpa.shadow_vqs, 0); |
| int r; |
| |
| r = vhost_svq_add(svq, out_sg, out_num, in_sg, in_num, NULL); |
| if (unlikely(r != 0)) { |
| if (unlikely(r == -ENOSPC)) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: No space on device queue\n", |
| __func__); |
| } |
| } |
| |
| return r; |
| } |
| |
| /* |
| * Convenience wrapper to poll SVQ for multiple control commands. |
| * |
| * Caller should hold the BQL when invoking this function, and should take |
| * the answer before SVQ pulls by itself when BQL is released. |
| */ |
| static ssize_t vhost_vdpa_net_svq_poll(VhostVDPAState *s, size_t cmds_in_flight) |
| { |
| VhostShadowVirtqueue *svq = g_ptr_array_index(s->vhost_vdpa.shadow_vqs, 0); |
| return vhost_svq_poll(svq, cmds_in_flight); |
| } |
| |
| static void vhost_vdpa_net_load_cursor_reset(VhostVDPAState *s, |
| struct iovec *out_cursor, |
| struct iovec *in_cursor) |
| { |
| /* reset the cursor of the output buffer for the device */ |
| out_cursor->iov_base = s->cvq_cmd_out_buffer; |
| out_cursor->iov_len = vhost_vdpa_net_cvq_cmd_page_len(); |
| |
| /* reset the cursor of the in buffer for the device */ |
| in_cursor->iov_base = s->status; |
| in_cursor->iov_len = vhost_vdpa_net_cvq_cmd_page_len(); |
| } |
| |
| /* |
| * Poll SVQ for multiple pending control commands and check the device's ack. |
| * |
| * Caller should hold the BQL when invoking this function. |
| * |
| * @s: The VhostVDPAState |
| * @len: The length of the pending status shadow buffer |
| */ |
| static ssize_t vhost_vdpa_net_svq_flush(VhostVDPAState *s, size_t len) |
| { |
| /* device uses a one-byte length ack for each control command */ |
| ssize_t dev_written = vhost_vdpa_net_svq_poll(s, len); |
| if (unlikely(dev_written != len)) { |
| return -EIO; |
| } |
| |
| /* check the device's ack */ |
| for (int i = 0; i < len; ++i) { |
| if (s->status[i] != VIRTIO_NET_OK) { |
| return -EIO; |
| } |
| } |
| return 0; |
| } |
| |
| static ssize_t vhost_vdpa_net_load_cmd(VhostVDPAState *s, |
| struct iovec *out_cursor, |
| struct iovec *in_cursor, uint8_t class, |
| uint8_t cmd, const struct iovec *data_sg, |
| size_t data_num) |
| { |
| const struct virtio_net_ctrl_hdr ctrl = { |
| .class = class, |
| .cmd = cmd, |
| }; |
| size_t data_size = iov_size(data_sg, data_num), cmd_size; |
| struct iovec out, in; |
| ssize_t r; |
| unsigned dummy_cursor_iov_cnt; |
| VhostShadowVirtqueue *svq = g_ptr_array_index(s->vhost_vdpa.shadow_vqs, 0); |
| |
| assert(data_size < vhost_vdpa_net_cvq_cmd_page_len() - sizeof(ctrl)); |
| cmd_size = sizeof(ctrl) + data_size; |
| trace_vhost_vdpa_net_load_cmd(s, class, cmd, data_num, data_size); |
| if (vhost_svq_available_slots(svq) < 2 || |
| iov_size(out_cursor, 1) < cmd_size) { |
| /* |
| * It is time to flush all pending control commands if SVQ is full |
| * or control commands shadow buffers are full. |
| * |
| * We can poll here since we've had BQL from the time |
| * we sent the descriptor. |
| */ |
| r = vhost_vdpa_net_svq_flush(s, in_cursor->iov_base - |
| (void *)s->status); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| |
| vhost_vdpa_net_load_cursor_reset(s, out_cursor, in_cursor); |
| } |
| |
| /* pack the CVQ command header */ |
| iov_from_buf(out_cursor, 1, 0, &ctrl, sizeof(ctrl)); |
| /* pack the CVQ command command-specific-data */ |
| iov_to_buf(data_sg, data_num, 0, |
| out_cursor->iov_base + sizeof(ctrl), data_size); |
| |
| /* extract the required buffer from the cursor for output */ |
| iov_copy(&out, 1, out_cursor, 1, 0, cmd_size); |
| /* extract the required buffer from the cursor for input */ |
| iov_copy(&in, 1, in_cursor, 1, 0, sizeof(*s->status)); |
| |
| r = vhost_vdpa_net_cvq_add(s, &out, 1, &in, 1); |
| if (unlikely(r < 0)) { |
| trace_vhost_vdpa_net_load_cmd_retval(s, class, cmd, r); |
| return r; |
| } |
| |
| /* iterate the cursors */ |
| dummy_cursor_iov_cnt = 1; |
| iov_discard_front(&out_cursor, &dummy_cursor_iov_cnt, cmd_size); |
| dummy_cursor_iov_cnt = 1; |
| iov_discard_front(&in_cursor, &dummy_cursor_iov_cnt, sizeof(*s->status)); |
| |
| return 0; |
| } |
| |
| static int vhost_vdpa_net_load_mac(VhostVDPAState *s, const VirtIONet *n, |
| struct iovec *out_cursor, |
| struct iovec *in_cursor) |
| { |
| if (virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_MAC_ADDR)) { |
| const struct iovec data = { |
| .iov_base = (void *)n->mac, |
| .iov_len = sizeof(n->mac), |
| }; |
| ssize_t r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor, |
| VIRTIO_NET_CTRL_MAC, |
| VIRTIO_NET_CTRL_MAC_ADDR_SET, |
| &data, 1); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| } |
| |
| /* |
| * According to VirtIO standard, "The device MUST have an |
| * empty MAC filtering table on reset.". |
| * |
| * Therefore, there is no need to send this CVQ command if the |
| * driver also sets an empty MAC filter table, which aligns with |
| * the device's defaults. |
| * |
| * Note that the device's defaults can mismatch the driver's |
| * configuration only at live migration. |
| */ |
| if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_RX) || |
| n->mac_table.in_use == 0) { |
| return 0; |
| } |
| |
| uint32_t uni_entries = n->mac_table.first_multi, |
| uni_macs_size = uni_entries * ETH_ALEN, |
| mul_entries = n->mac_table.in_use - uni_entries, |
| mul_macs_size = mul_entries * ETH_ALEN; |
| struct virtio_net_ctrl_mac uni = { |
| .entries = cpu_to_le32(uni_entries), |
| }; |
| struct virtio_net_ctrl_mac mul = { |
| .entries = cpu_to_le32(mul_entries), |
| }; |
| const struct iovec data[] = { |
| { |
| .iov_base = &uni, |
| .iov_len = sizeof(uni), |
| }, { |
| .iov_base = n->mac_table.macs, |
| .iov_len = uni_macs_size, |
| }, { |
| .iov_base = &mul, |
| .iov_len = sizeof(mul), |
| }, { |
| .iov_base = &n->mac_table.macs[uni_macs_size], |
| .iov_len = mul_macs_size, |
| }, |
| }; |
| ssize_t r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor, |
| VIRTIO_NET_CTRL_MAC, |
| VIRTIO_NET_CTRL_MAC_TABLE_SET, |
| data, ARRAY_SIZE(data)); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int vhost_vdpa_net_load_rss(VhostVDPAState *s, const VirtIONet *n, |
| struct iovec *out_cursor, |
| struct iovec *in_cursor, bool do_rss) |
| { |
| struct virtio_net_rss_config cfg = {}; |
| ssize_t r; |
| g_autofree uint16_t *table = NULL; |
| |
| /* |
| * According to VirtIO standard, "Initially the device has all hash |
| * types disabled and reports only VIRTIO_NET_HASH_REPORT_NONE.". |
| * |
| * Therefore, there is no need to send this CVQ command if the |
| * driver disables the all hash types, which aligns with |
| * the device's defaults. |
| * |
| * Note that the device's defaults can mismatch the driver's |
| * configuration only at live migration. |
| */ |
| if (!n->rss_data.enabled || |
| n->rss_data.hash_types == VIRTIO_NET_HASH_REPORT_NONE) { |
| return 0; |
| } |
| |
| table = g_malloc_n(n->rss_data.indirections_len, |
| sizeof(n->rss_data.indirections_table[0])); |
| cfg.hash_types = cpu_to_le32(n->rss_data.hash_types); |
| |
| if (do_rss) { |
| /* |
| * According to VirtIO standard, "Number of entries in indirection_table |
| * is (indirection_table_mask + 1)". |
| */ |
| cfg.indirection_table_mask = cpu_to_le16(n->rss_data.indirections_len - |
| 1); |
| cfg.unclassified_queue = cpu_to_le16(n->rss_data.default_queue); |
| for (int i = 0; i < n->rss_data.indirections_len; ++i) { |
| table[i] = cpu_to_le16(n->rss_data.indirections_table[i]); |
| } |
| cfg.max_tx_vq = cpu_to_le16(n->curr_queue_pairs); |
| } else { |
| /* |
| * According to VirtIO standard, "Field reserved MUST contain zeroes. |
| * It is defined to make the structure to match the layout of |
| * virtio_net_rss_config structure, defined in 5.1.6.5.7.". |
| * |
| * Therefore, we need to zero the fields in |
| * struct virtio_net_rss_config, which corresponds to the |
| * `reserved` field in struct virtio_net_hash_config. |
| * |
| * Note that all other fields are zeroed at their definitions, |
| * except for the `indirection_table` field, where the actual data |
| * is stored in the `table` variable to ensure compatibility |
| * with RSS case. Therefore, we need to zero the `table` variable here. |
| */ |
| table[0] = 0; |
| } |
| |
| /* |
| * Considering that virtio_net_handle_rss() currently does not restore |
| * the hash key length parsed from the CVQ command sent from the guest |
| * into n->rss_data and uses the maximum key length in other code, so |
| * we also employ the maximum key length here. |
| */ |
| cfg.hash_key_length = sizeof(n->rss_data.key); |
| |
| const struct iovec data[] = { |
| { |
| .iov_base = &cfg, |
| .iov_len = offsetof(struct virtio_net_rss_config, |
| indirection_table), |
| }, { |
| .iov_base = table, |
| .iov_len = n->rss_data.indirections_len * |
| sizeof(n->rss_data.indirections_table[0]), |
| }, { |
| .iov_base = &cfg.max_tx_vq, |
| .iov_len = offsetof(struct virtio_net_rss_config, hash_key_data) - |
| offsetof(struct virtio_net_rss_config, max_tx_vq), |
| }, { |
| .iov_base = (void *)n->rss_data.key, |
| .iov_len = sizeof(n->rss_data.key), |
| } |
| }; |
| |
| r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor, |
| VIRTIO_NET_CTRL_MQ, |
| do_rss ? VIRTIO_NET_CTRL_MQ_RSS_CONFIG : |
| VIRTIO_NET_CTRL_MQ_HASH_CONFIG, |
| data, ARRAY_SIZE(data)); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int vhost_vdpa_net_load_mq(VhostVDPAState *s, |
| const VirtIONet *n, |
| struct iovec *out_cursor, |
| struct iovec *in_cursor) |
| { |
| struct virtio_net_ctrl_mq mq; |
| ssize_t r; |
| |
| if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_MQ)) { |
| return 0; |
| } |
| |
| trace_vhost_vdpa_net_load_mq(s, n->curr_queue_pairs); |
| |
| mq.virtqueue_pairs = cpu_to_le16(n->curr_queue_pairs); |
| const struct iovec data = { |
| .iov_base = &mq, |
| .iov_len = sizeof(mq), |
| }; |
| r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor, |
| VIRTIO_NET_CTRL_MQ, |
| VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET, |
| &data, 1); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| |
| if (virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_RSS)) { |
| /* load the receive-side scaling state */ |
| r = vhost_vdpa_net_load_rss(s, n, out_cursor, in_cursor, true); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| } else if (virtio_vdev_has_feature(&n->parent_obj, |
| VIRTIO_NET_F_HASH_REPORT)) { |
| /* load the hash calculation state */ |
| r = vhost_vdpa_net_load_rss(s, n, out_cursor, in_cursor, false); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int vhost_vdpa_net_load_offloads(VhostVDPAState *s, |
| const VirtIONet *n, |
| struct iovec *out_cursor, |
| struct iovec *in_cursor) |
| { |
| uint64_t offloads; |
| ssize_t r; |
| |
| if (!virtio_vdev_has_feature(&n->parent_obj, |
| VIRTIO_NET_F_CTRL_GUEST_OFFLOADS)) { |
| return 0; |
| } |
| |
| if (n->curr_guest_offloads == virtio_net_supported_guest_offloads(n)) { |
| /* |
| * According to VirtIO standard, "Upon feature negotiation |
| * corresponding offload gets enabled to preserve |
| * backward compatibility.". |
| * |
| * Therefore, there is no need to send this CVQ command if the |
| * driver also enables all supported offloads, which aligns with |
| * the device's defaults. |
| * |
| * Note that the device's defaults can mismatch the driver's |
| * configuration only at live migration. |
| */ |
| return 0; |
| } |
| |
| offloads = cpu_to_le64(n->curr_guest_offloads); |
| const struct iovec data = { |
| .iov_base = &offloads, |
| .iov_len = sizeof(offloads), |
| }; |
| r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor, |
| VIRTIO_NET_CTRL_GUEST_OFFLOADS, |
| VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET, |
| &data, 1); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int vhost_vdpa_net_load_rx_mode(VhostVDPAState *s, |
| struct iovec *out_cursor, |
| struct iovec *in_cursor, |
| uint8_t cmd, |
| uint8_t on) |
| { |
| const struct iovec data = { |
| .iov_base = &on, |
| .iov_len = sizeof(on), |
| }; |
| ssize_t r; |
| |
| r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor, |
| VIRTIO_NET_CTRL_RX, cmd, &data, 1); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int vhost_vdpa_net_load_rx(VhostVDPAState *s, |
| const VirtIONet *n, |
| struct iovec *out_cursor, |
| struct iovec *in_cursor) |
| { |
| ssize_t r; |
| |
| if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_RX)) { |
| return 0; |
| } |
| |
| /* |
| * According to virtio_net_reset(), device turns promiscuous mode |
| * on by default. |
| * |
| * Additionally, according to VirtIO standard, "Since there are |
| * no guarantees, it can use a hash filter or silently switch to |
| * allmulti or promiscuous mode if it is given too many addresses.". |
| * QEMU marks `n->mac_table.uni_overflow` if guest sets too many |
| * non-multicast MAC addresses, indicating that promiscuous mode |
| * should be enabled. |
| * |
| * Therefore, QEMU should only send this CVQ command if the |
| * `n->mac_table.uni_overflow` is not marked and `n->promisc` is off, |
| * which sets promiscuous mode on, different from the device's defaults. |
| * |
| * Note that the device's defaults can mismatch the driver's |
| * configuration only at live migration. |
| */ |
| if (!n->mac_table.uni_overflow && !n->promisc) { |
| r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor, |
| VIRTIO_NET_CTRL_RX_PROMISC, 0); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| } |
| |
| /* |
| * According to virtio_net_reset(), device turns all-multicast mode |
| * off by default. |
| * |
| * According to VirtIO standard, "Since there are no guarantees, |
| * it can use a hash filter or silently switch to allmulti or |
| * promiscuous mode if it is given too many addresses.". QEMU marks |
| * `n->mac_table.multi_overflow` if guest sets too many |
| * non-multicast MAC addresses. |
| * |
| * Therefore, QEMU should only send this CVQ command if the |
| * `n->mac_table.multi_overflow` is marked or `n->allmulti` is on, |
| * which sets all-multicast mode on, different from the device's defaults. |
| * |
| * Note that the device's defaults can mismatch the driver's |
| * configuration only at live migration. |
| */ |
| if (n->mac_table.multi_overflow || n->allmulti) { |
| r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor, |
| VIRTIO_NET_CTRL_RX_ALLMULTI, 1); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| } |
| |
| if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_RX_EXTRA)) { |
| return 0; |
| } |
| |
| /* |
| * According to virtio_net_reset(), device turns all-unicast mode |
| * off by default. |
| * |
| * Therefore, QEMU should only send this CVQ command if the driver |
| * sets all-unicast mode on, different from the device's defaults. |
| * |
| * Note that the device's defaults can mismatch the driver's |
| * configuration only at live migration. |
| */ |
| if (n->alluni) { |
| r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor, |
| VIRTIO_NET_CTRL_RX_ALLUNI, 1); |
| if (r < 0) { |
| return r; |
| } |
| } |
| |
| /* |
| * According to virtio_net_reset(), device turns non-multicast mode |
| * off by default. |
| * |
| * Therefore, QEMU should only send this CVQ command if the driver |
| * sets non-multicast mode on, different from the device's defaults. |
| * |
| * Note that the device's defaults can mismatch the driver's |
| * configuration only at live migration. |
| */ |
| if (n->nomulti) { |
| r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor, |
| VIRTIO_NET_CTRL_RX_NOMULTI, 1); |
| if (r < 0) { |
| return r; |
| } |
| } |
| |
| /* |
| * According to virtio_net_reset(), device turns non-unicast mode |
| * off by default. |
| * |
| * Therefore, QEMU should only send this CVQ command if the driver |
| * sets non-unicast mode on, different from the device's defaults. |
| * |
| * Note that the device's defaults can mismatch the driver's |
| * configuration only at live migration. |
| */ |
| if (n->nouni) { |
| r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor, |
| VIRTIO_NET_CTRL_RX_NOUNI, 1); |
| if (r < 0) { |
| return r; |
| } |
| } |
| |
| /* |
| * According to virtio_net_reset(), device turns non-broadcast mode |
| * off by default. |
| * |
| * Therefore, QEMU should only send this CVQ command if the driver |
| * sets non-broadcast mode on, different from the device's defaults. |
| * |
| * Note that the device's defaults can mismatch the driver's |
| * configuration only at live migration. |
| */ |
| if (n->nobcast) { |
| r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor, |
| VIRTIO_NET_CTRL_RX_NOBCAST, 1); |
| if (r < 0) { |
| return r; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int vhost_vdpa_net_load_single_vlan(VhostVDPAState *s, |
| const VirtIONet *n, |
| struct iovec *out_cursor, |
| struct iovec *in_cursor, |
| uint16_t vid) |
| { |
| const struct iovec data = { |
| .iov_base = &vid, |
| .iov_len = sizeof(vid), |
| }; |
| ssize_t r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor, |
| VIRTIO_NET_CTRL_VLAN, |
| VIRTIO_NET_CTRL_VLAN_ADD, |
| &data, 1); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int vhost_vdpa_net_load_vlan(VhostVDPAState *s, |
| const VirtIONet *n, |
| struct iovec *out_cursor, |
| struct iovec *in_cursor) |
| { |
| int r; |
| |
| if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_VLAN)) { |
| return 0; |
| } |
| |
| for (int i = 0; i < MAX_VLAN >> 5; i++) { |
| for (int j = 0; n->vlans[i] && j <= 0x1f; j++) { |
| if (n->vlans[i] & (1U << j)) { |
| r = vhost_vdpa_net_load_single_vlan(s, n, out_cursor, |
| in_cursor, (i << 5) + j); |
| if (unlikely(r != 0)) { |
| return r; |
| } |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int vhost_vdpa_net_cvq_load(NetClientState *nc) |
| { |
| VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc); |
| struct vhost_vdpa *v = &s->vhost_vdpa; |
| const VirtIONet *n; |
| int r; |
| struct iovec out_cursor, in_cursor; |
| |
| assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA); |
| |
| r = vhost_vdpa_set_vring_ready(v, v->dev->vq_index); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| |
| if (v->shadow_vqs_enabled) { |
| n = VIRTIO_NET(v->dev->vdev); |
| vhost_vdpa_net_load_cursor_reset(s, &out_cursor, &in_cursor); |
| r = vhost_vdpa_net_load_mac(s, n, &out_cursor, &in_cursor); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| r = vhost_vdpa_net_load_mq(s, n, &out_cursor, &in_cursor); |
| if (unlikely(r)) { |
| return r; |
| } |
| r = vhost_vdpa_net_load_offloads(s, n, &out_cursor, &in_cursor); |
| if (unlikely(r)) { |
| return r; |
| } |
| r = vhost_vdpa_net_load_rx(s, n, &out_cursor, &in_cursor); |
| if (unlikely(r)) { |
| return r; |
| } |
| r = vhost_vdpa_net_load_vlan(s, n, &out_cursor, &in_cursor); |
| if (unlikely(r)) { |
| return r; |
| } |
| |
| /* |
| * We need to poll and check all pending device's used buffers. |
| * |
| * We can poll here since we've had BQL from the time |
| * we sent the descriptor. |
| */ |
| r = vhost_vdpa_net_svq_flush(s, in_cursor.iov_base - (void *)s->status); |
| if (unlikely(r)) { |
| return r; |
| } |
| } |
| |
| for (int i = 0; i < v->dev->vq_index; ++i) { |
| r = vhost_vdpa_set_vring_ready(v, i); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static NetClientInfo net_vhost_vdpa_cvq_info = { |
| .type = NET_CLIENT_DRIVER_VHOST_VDPA, |
| .size = sizeof(VhostVDPAState), |
| .receive = vhost_vdpa_receive, |
| .start = vhost_vdpa_net_cvq_start, |
| .load = vhost_vdpa_net_cvq_load, |
| .stop = vhost_vdpa_net_cvq_stop, |
| .cleanup = vhost_vdpa_cleanup, |
| .has_vnet_hdr = vhost_vdpa_has_vnet_hdr, |
| .has_ufo = vhost_vdpa_has_ufo, |
| .check_peer_type = vhost_vdpa_check_peer_type, |
| .set_steering_ebpf = vhost_vdpa_set_steering_ebpf, |
| }; |
| |
| /* |
| * Forward the excessive VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command to |
| * vdpa device. |
| * |
| * Considering that QEMU cannot send the entire filter table to the |
| * vdpa device, it should send the VIRTIO_NET_CTRL_RX_PROMISC CVQ |
| * command to enable promiscuous mode to receive all packets, |
| * according to VirtIO standard, "Since there are no guarantees, |
| * it can use a hash filter or silently switch to allmulti or |
| * promiscuous mode if it is given too many addresses.". |
| * |
| * Since QEMU ignores MAC addresses beyond `MAC_TABLE_ENTRIES` and |
| * marks `n->mac_table.x_overflow` accordingly, it should have |
| * the same effect on the device model to receive |
| * (`MAC_TABLE_ENTRIES` + 1) or more non-multicast MAC addresses. |
| * The same applies to multicast MAC addresses. |
| * |
| * Therefore, QEMU can provide the device model with a fake |
| * VIRTIO_NET_CTRL_MAC_TABLE_SET command with (`MAC_TABLE_ENTRIES` + 1) |
| * non-multicast MAC addresses and (`MAC_TABLE_ENTRIES` + 1) multicast |
| * MAC addresses. This ensures that the device model marks |
| * `n->mac_table.uni_overflow` and `n->mac_table.multi_overflow`, |
| * allowing all packets to be received, which aligns with the |
| * state of the vdpa device. |
| */ |
| static int vhost_vdpa_net_excessive_mac_filter_cvq_add(VhostVDPAState *s, |
| VirtQueueElement *elem, |
| struct iovec *out, |
| const struct iovec *in) |
| { |
| struct virtio_net_ctrl_mac mac_data, *mac_ptr; |
| struct virtio_net_ctrl_hdr *hdr_ptr; |
| uint32_t cursor; |
| ssize_t r; |
| uint8_t on = 1; |
| |
| /* parse the non-multicast MAC address entries from CVQ command */ |
| cursor = sizeof(*hdr_ptr); |
| r = iov_to_buf(elem->out_sg, elem->out_num, cursor, |
| &mac_data, sizeof(mac_data)); |
| if (unlikely(r != sizeof(mac_data))) { |
| /* |
| * If the CVQ command is invalid, we should simulate the vdpa device |
| * to reject the VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command |
| */ |
| *s->status = VIRTIO_NET_ERR; |
| return sizeof(*s->status); |
| } |
| cursor += sizeof(mac_data) + le32_to_cpu(mac_data.entries) * ETH_ALEN; |
| |
| /* parse the multicast MAC address entries from CVQ command */ |
| r = iov_to_buf(elem->out_sg, elem->out_num, cursor, |
| &mac_data, sizeof(mac_data)); |
| if (r != sizeof(mac_data)) { |
| /* |
| * If the CVQ command is invalid, we should simulate the vdpa device |
| * to reject the VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command |
| */ |
| *s->status = VIRTIO_NET_ERR; |
| return sizeof(*s->status); |
| } |
| cursor += sizeof(mac_data) + le32_to_cpu(mac_data.entries) * ETH_ALEN; |
| |
| /* validate the CVQ command */ |
| if (iov_size(elem->out_sg, elem->out_num) != cursor) { |
| /* |
| * If the CVQ command is invalid, we should simulate the vdpa device |
| * to reject the VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command |
| */ |
| *s->status = VIRTIO_NET_ERR; |
| return sizeof(*s->status); |
| } |
| |
| /* |
| * According to VirtIO standard, "Since there are no guarantees, |
| * it can use a hash filter or silently switch to allmulti or |
| * promiscuous mode if it is given too many addresses.". |
| * |
| * Therefore, considering that QEMU is unable to send the entire |
| * filter table to the vdpa device, it should send the |
| * VIRTIO_NET_CTRL_RX_PROMISC CVQ command to enable promiscuous mode |
| */ |
| hdr_ptr = out->iov_base; |
| out->iov_len = sizeof(*hdr_ptr) + sizeof(on); |
| |
| hdr_ptr->class = VIRTIO_NET_CTRL_RX; |
| hdr_ptr->cmd = VIRTIO_NET_CTRL_RX_PROMISC; |
| iov_from_buf(out, 1, sizeof(*hdr_ptr), &on, sizeof(on)); |
| r = vhost_vdpa_net_cvq_add(s, out, 1, in, 1); |
| if (unlikely(r < 0)) { |
| return r; |
| } |
| |
| /* |
| * We can poll here since we've had BQL from the time |
| * we sent the descriptor. |
| */ |
| r = vhost_vdpa_net_svq_poll(s, 1); |
| if (unlikely(r < sizeof(*s->status))) { |
| return r; |
| } |
| if (*s->status != VIRTIO_NET_OK) { |
| return sizeof(*s->status); |
| } |
| |
| /* |
| * QEMU should also send a fake VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ |
| * command to the device model, including (`MAC_TABLE_ENTRIES` + 1) |
| * non-multicast MAC addresses and (`MAC_TABLE_ENTRIES` + 1) |
| * multicast MAC addresses. |
| * |
| * By doing so, the device model can mark `n->mac_table.uni_overflow` |
| * and `n->mac_table.multi_overflow`, enabling all packets to be |
| * received, which aligns with the state of the vdpa device. |
| */ |
| cursor = 0; |
| uint32_t fake_uni_entries = MAC_TABLE_ENTRIES + 1, |
| fake_mul_entries = MAC_TABLE_ENTRIES + 1, |
| fake_cvq_size = sizeof(struct virtio_net_ctrl_hdr) + |
| sizeof(mac_data) + fake_uni_entries * ETH_ALEN + |
| sizeof(mac_data) + fake_mul_entries * ETH_ALEN; |
| |
| assert(fake_cvq_size < vhost_vdpa_net_cvq_cmd_page_len()); |
| out->iov_len = fake_cvq_size; |
| |
| /* pack the header for fake CVQ command */ |
| hdr_ptr = out->iov_base + cursor; |
| hdr_ptr->class = VIRTIO_NET_CTRL_MAC; |
| hdr_ptr->cmd = VIRTIO_NET_CTRL_MAC_TABLE_SET; |
| cursor += sizeof(*hdr_ptr); |
| |
| /* |
| * Pack the non-multicast MAC addresses part for fake CVQ command. |
| * |
| * According to virtio_net_handle_mac(), QEMU doesn't verify the MAC |
| * addresses provided in CVQ command. Therefore, only the entries |
| * field need to be prepared in the CVQ command. |
| */ |
| mac_ptr = out->iov_base + cursor; |
| mac_ptr->entries = cpu_to_le32(fake_uni_entries); |
| cursor += sizeof(*mac_ptr) + fake_uni_entries * ETH_ALEN; |
| |
| /* |
| * Pack the multicast MAC addresses part for fake CVQ command. |
| * |
| * According to virtio_net_handle_mac(), QEMU doesn't verify the MAC |
| * addresses provided in CVQ command. Therefore, only the entries |
| * field need to be prepared in the CVQ command. |
| */ |
| mac_ptr = out->iov_base + cursor; |
| mac_ptr->entries = cpu_to_le32(fake_mul_entries); |
| |
| /* |
| * Simulating QEMU poll a vdpa device used buffer |
| * for VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command |
| */ |
| return sizeof(*s->status); |
| } |
| |
| /** |
| * Validate and copy control virtqueue commands. |
| * |
| * Following QEMU guidelines, we offer a copy of the buffers to the device to |
| * prevent TOCTOU bugs. |
| */ |
| static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq, |
| VirtQueueElement *elem, |
| void *opaque) |
| { |
| VhostVDPAState *s = opaque; |
| size_t in_len; |
| const struct virtio_net_ctrl_hdr *ctrl; |
| virtio_net_ctrl_ack status = VIRTIO_NET_ERR; |
| /* Out buffer sent to both the vdpa device and the device model */ |
| struct iovec out = { |
| .iov_base = s->cvq_cmd_out_buffer, |
| }; |
| /* in buffer used for device model */ |
| const struct iovec model_in = { |
| .iov_base = &status, |
| .iov_len = sizeof(status), |
| }; |
| /* in buffer used for vdpa device */ |
| const struct iovec vdpa_in = { |
| .iov_base = s->status, |
| .iov_len = sizeof(*s->status), |
| }; |
| ssize_t dev_written = -EINVAL; |
| |
| out.iov_len = iov_to_buf(elem->out_sg, elem->out_num, 0, |
| s->cvq_cmd_out_buffer, |
| vhost_vdpa_net_cvq_cmd_page_len()); |
| |
| ctrl = s->cvq_cmd_out_buffer; |
| if (ctrl->class == VIRTIO_NET_CTRL_ANNOUNCE) { |
| /* |
| * Guest announce capability is emulated by qemu, so don't forward to |
| * the device. |
| */ |
| dev_written = sizeof(status); |
| *s->status = VIRTIO_NET_OK; |
| } else if (unlikely(ctrl->class == VIRTIO_NET_CTRL_MAC && |
| ctrl->cmd == VIRTIO_NET_CTRL_MAC_TABLE_SET && |
| iov_size(elem->out_sg, elem->out_num) > out.iov_len)) { |
| /* |
| * Due to the size limitation of the out buffer sent to the vdpa device, |
| * which is determined by vhost_vdpa_net_cvq_cmd_page_len(), excessive |
| * MAC addresses set by the driver for the filter table can cause |
| * truncation of the CVQ command in QEMU. As a result, the vdpa device |
| * rejects the flawed CVQ command. |
| * |
| * Therefore, QEMU must handle this situation instead of sending |
| * the CVQ command directly. |
| */ |
| dev_written = vhost_vdpa_net_excessive_mac_filter_cvq_add(s, elem, |
| &out, &vdpa_in); |
| if (unlikely(dev_written < 0)) { |
| goto out; |
| } |
| } else { |
| ssize_t r; |
| r = vhost_vdpa_net_cvq_add(s, &out, 1, &vdpa_in, 1); |
| if (unlikely(r < 0)) { |
| dev_written = r; |
| goto out; |
| } |
| |
| /* |
| * We can poll here since we've had BQL from the time |
| * we sent the descriptor. |
| */ |
| dev_written = vhost_vdpa_net_svq_poll(s, 1); |
| } |
| |
| if (unlikely(dev_written < sizeof(status))) { |
| error_report("Insufficient written data (%zu)", dev_written); |
| goto out; |
| } |
| |
| if (*s->status != VIRTIO_NET_OK) { |
| goto out; |
| } |
| |
| status = VIRTIO_NET_ERR; |
| virtio_net_handle_ctrl_iov(svq->vdev, &model_in, 1, &out, 1); |
| if (status != VIRTIO_NET_OK) { |
| error_report("Bad CVQ processing in model"); |
| } |
| |
| out: |
| in_len = iov_from_buf(elem->in_sg, elem->in_num, 0, &status, |
| sizeof(status)); |
| if (unlikely(in_len < sizeof(status))) { |
| error_report("Bad device CVQ written length"); |
| } |
| vhost_svq_push_elem(svq, elem, MIN(in_len, sizeof(status))); |
| /* |
| * `elem` belongs to vhost_vdpa_net_handle_ctrl_avail() only when |
| * the function successfully forwards the CVQ command, indicated |
| * by a non-negative value of `dev_written`. Otherwise, it still |
| * belongs to SVQ. |
| * This function should only free the `elem` when it owns. |
| */ |
| if (dev_written >= 0) { |
| g_free(elem); |
| } |
| return dev_written < 0 ? dev_written : 0; |
| } |
| |
| static const VhostShadowVirtqueueOps vhost_vdpa_net_svq_ops = { |
| .avail_handler = vhost_vdpa_net_handle_ctrl_avail, |
| }; |
| |
| /** |
| * Probe if CVQ is isolated |
| * |
| * @device_fd The vdpa device fd |
| * @features Features offered by the device. |
| * @cvq_index The control vq pair index |
| * |
| * Returns <0 in case of failure, 0 if false and 1 if true. |
| */ |
| static int vhost_vdpa_probe_cvq_isolation(int device_fd, uint64_t features, |
| int cvq_index, Error **errp) |
| { |
| ERRP_GUARD(); |
| uint64_t backend_features; |
| int64_t cvq_group; |
| uint8_t status = VIRTIO_CONFIG_S_ACKNOWLEDGE | |
| VIRTIO_CONFIG_S_DRIVER; |
| int r; |
| |
| r = ioctl(device_fd, VHOST_GET_BACKEND_FEATURES, &backend_features); |
| if (unlikely(r < 0)) { |
| error_setg_errno(errp, errno, "Cannot get vdpa backend_features"); |
| return r; |
| } |
| |
| if (!(backend_features & BIT_ULL(VHOST_BACKEND_F_IOTLB_ASID))) { |
| return 0; |
| } |
| |
| r = ioctl(device_fd, VHOST_VDPA_SET_STATUS, &status); |
| if (unlikely(r)) { |
| error_setg_errno(errp, -r, "Cannot set device status"); |
| goto out; |
| } |
| |
| r = ioctl(device_fd, VHOST_SET_FEATURES, &features); |
| if (unlikely(r)) { |
| error_setg_errno(errp, -r, "Cannot set features"); |
| goto out; |
| } |
| |
| status |= VIRTIO_CONFIG_S_FEATURES_OK; |
| r = ioctl(device_fd, VHOST_VDPA_SET_STATUS, &status); |
| if (unlikely(r)) { |
| error_setg_errno(errp, -r, "Cannot set device status"); |
| goto out; |
| } |
| |
| cvq_group = vhost_vdpa_get_vring_group(device_fd, cvq_index, errp); |
| if (unlikely(cvq_group < 0)) { |
| if (cvq_group != -ENOTSUP) { |
| r = cvq_group; |
| goto out; |
| } |
| |
| /* |
| * The kernel report VHOST_BACKEND_F_IOTLB_ASID if the vdpa frontend |
| * support ASID even if the parent driver does not. The CVQ cannot be |
| * isolated in this case. |
| */ |
| error_free(*errp); |
| *errp = NULL; |
| r = 0; |
| goto out; |
| } |
| |
| for (int i = 0; i < cvq_index; ++i) { |
| int64_t group = vhost_vdpa_get_vring_group(device_fd, i, errp); |
| if (unlikely(group < 0)) { |
| r = group; |
| goto out; |
| } |
| |
| if (group == (int64_t)cvq_group) { |
| r = 0; |
| goto out; |
| } |
| } |
| |
| r = 1; |
| |
| out: |
| status = 0; |
| ioctl(device_fd, VHOST_VDPA_SET_STATUS, &status); |
| return r; |
| } |
| |
| static NetClientState *net_vhost_vdpa_init(NetClientState *peer, |
| const char *device, |
| const char *name, |
| int vdpa_device_fd, |
| int queue_pair_index, |
| int nvqs, |
| bool is_datapath, |
| bool svq, |
| struct vhost_vdpa_iova_range iova_range, |
| uint64_t features, |
| VhostVDPAShared *shared, |
| Error **errp) |
| { |
| NetClientState *nc = NULL; |
| VhostVDPAState *s; |
| int ret = 0; |
| assert(name); |
| int cvq_isolated = 0; |
| |
| if (is_datapath) { |
| nc = qemu_new_net_client(&net_vhost_vdpa_info, peer, device, |
| name); |
| } else { |
| cvq_isolated = vhost_vdpa_probe_cvq_isolation(vdpa_device_fd, features, |
| queue_pair_index * 2, |
| errp); |
| if (unlikely(cvq_isolated < 0)) { |
| return NULL; |
| } |
| |
| nc = qemu_new_net_control_client(&net_vhost_vdpa_cvq_info, peer, |
| device, name); |
| } |
| qemu_set_info_str(nc, TYPE_VHOST_VDPA); |
| s = DO_UPCAST(VhostVDPAState, nc, nc); |
| |
| s->vhost_vdpa.index = queue_pair_index; |
| s->always_svq = svq; |
| s->migration_state.notify = NULL; |
| s->vhost_vdpa.shadow_vqs_enabled = svq; |
| if (queue_pair_index == 0) { |
| vhost_vdpa_net_valid_svq_features(features, |
| &s->vhost_vdpa.migration_blocker); |
| s->vhost_vdpa.shared = g_new0(VhostVDPAShared, 1); |
| s->vhost_vdpa.shared->device_fd = vdpa_device_fd; |
| s->vhost_vdpa.shared->iova_range = iova_range; |
| s->vhost_vdpa.shared->shadow_data = svq; |
| } else if (!is_datapath) { |
| s->cvq_cmd_out_buffer = mmap(NULL, vhost_vdpa_net_cvq_cmd_page_len(), |
| PROT_READ | PROT_WRITE, |
| MAP_SHARED | MAP_ANONYMOUS, -1, 0); |
| s->status = mmap(NULL, vhost_vdpa_net_cvq_cmd_page_len(), |
| PROT_READ | PROT_WRITE, MAP_SHARED | MAP_ANONYMOUS, |
| -1, 0); |
| |
| s->vhost_vdpa.shadow_vq_ops = &vhost_vdpa_net_svq_ops; |
| s->vhost_vdpa.shadow_vq_ops_opaque = s; |
| s->cvq_isolated = cvq_isolated; |
| } |
| if (queue_pair_index != 0) { |
| s->vhost_vdpa.shared = shared; |
| } |
| |
| ret = vhost_vdpa_add(nc, (void *)&s->vhost_vdpa, queue_pair_index, nvqs); |
| if (ret) { |
| qemu_del_net_client(nc); |
| return NULL; |
| } |
| |
| return nc; |
| } |
| |
| static int vhost_vdpa_get_features(int fd, uint64_t *features, Error **errp) |
| { |
| int ret = ioctl(fd, VHOST_GET_FEATURES, features); |
| if (unlikely(ret < 0)) { |
| error_setg_errno(errp, errno, |
| "Fail to query features from vhost-vDPA device"); |
| } |
| return ret; |
| } |
| |
| static int vhost_vdpa_get_max_queue_pairs(int fd, uint64_t features, |
| int *has_cvq, Error **errp) |
| { |
| unsigned long config_size = offsetof(struct vhost_vdpa_config, buf); |
| g_autofree struct vhost_vdpa_config *config = NULL; |
| __virtio16 *max_queue_pairs; |
| int ret; |
| |
| if (features & (1 << VIRTIO_NET_F_CTRL_VQ)) { |
| *has_cvq = 1; |
| } else { |
| *has_cvq = 0; |
| } |
| |
| if (features & (1 << VIRTIO_NET_F_MQ)) { |
| config = g_malloc0(config_size + sizeof(*max_queue_pairs)); |
| config->off = offsetof(struct virtio_net_config, max_virtqueue_pairs); |
| config->len = sizeof(*max_queue_pairs); |
| |
| ret = ioctl(fd, VHOST_VDPA_GET_CONFIG, config); |
| if (ret) { |
| error_setg(errp, "Fail to get config from vhost-vDPA device"); |
| return -ret; |
| } |
| |
| max_queue_pairs = (__virtio16 *)&config->buf; |
| |
| return lduw_le_p(max_queue_pairs); |
| } |
| |
| return 1; |
| } |
| |
| int net_init_vhost_vdpa(const Netdev *netdev, const char *name, |
| NetClientState *peer, Error **errp) |
| { |
| ERRP_GUARD(); |
| const NetdevVhostVDPAOptions *opts; |
| uint64_t features; |
| int vdpa_device_fd; |
| g_autofree NetClientState **ncs = NULL; |
| struct vhost_vdpa_iova_range iova_range; |
| NetClientState *nc; |
| int queue_pairs, r, i = 0, has_cvq = 0; |
| |
| assert(netdev->type == NET_CLIENT_DRIVER_VHOST_VDPA); |
| opts = &netdev->u.vhost_vdpa; |
| if (!opts->vhostdev && !opts->vhostfd) { |
| error_setg(errp, |
| "vhost-vdpa: neither vhostdev= nor vhostfd= was specified"); |
| return -1; |
| } |
| |
| if (opts->vhostdev && opts->vhostfd) { |
| error_setg(errp, |
| "vhost-vdpa: vhostdev= and vhostfd= are mutually exclusive"); |
| return -1; |
| } |
| |
| if (opts->vhostdev) { |
| vdpa_device_fd = qemu_open(opts->vhostdev, O_RDWR, errp); |
| if (vdpa_device_fd == -1) { |
| return -errno; |
| } |
| } else { |
| /* has_vhostfd */ |
| vdpa_device_fd = monitor_fd_param(monitor_cur(), opts->vhostfd, errp); |
| if (vdpa_device_fd == -1) { |
| error_prepend(errp, "vhost-vdpa: unable to parse vhostfd: "); |
| return -1; |
| } |
| } |
| |
| r = vhost_vdpa_get_features(vdpa_device_fd, &features, errp); |
| if (unlikely(r < 0)) { |
| goto err; |
| } |
| |
| queue_pairs = vhost_vdpa_get_max_queue_pairs(vdpa_device_fd, features, |
| &has_cvq, errp); |
| if (queue_pairs < 0) { |
| qemu_close(vdpa_device_fd); |
| return queue_pairs; |
| } |
| |
| r = vhost_vdpa_get_iova_range(vdpa_device_fd, &iova_range); |
| if (unlikely(r < 0)) { |
| error_setg(errp, "vhost-vdpa: get iova range failed: %s", |
| strerror(-r)); |
| goto err; |
| } |
| |
| if (opts->x_svq && !vhost_vdpa_net_valid_svq_features(features, errp)) { |
| goto err; |
| } |
| |
| ncs = g_malloc0(sizeof(*ncs) * queue_pairs); |
| |
| for (i = 0; i < queue_pairs; i++) { |
| VhostVDPAShared *shared = NULL; |
| |
| if (i) { |
| shared = DO_UPCAST(VhostVDPAState, nc, ncs[0])->vhost_vdpa.shared; |
| } |
| ncs[i] = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name, |
| vdpa_device_fd, i, 2, true, opts->x_svq, |
| iova_range, features, shared, errp); |
| if (!ncs[i]) |
| goto err; |
| } |
| |
| if (has_cvq) { |
| VhostVDPAState *s0 = DO_UPCAST(VhostVDPAState, nc, ncs[0]); |
| VhostVDPAShared *shared = s0->vhost_vdpa.shared; |
| |
| nc = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name, |
| vdpa_device_fd, i, 1, false, |
| opts->x_svq, iova_range, features, shared, |
| errp); |
| if (!nc) |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| if (i) { |
| for (i--; i >= 0; i--) { |
| qemu_del_net_client(ncs[i]); |
| } |
| } |
| |
| qemu_close(vdpa_device_fd); |
| |
| return -1; |
| } |