| /* |
| * S390 virtio-ccw loading program |
| * |
| * Copyright (c) 2013 Alexander Graf <agraf@suse.de> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or (at |
| * your option) any later version. See the COPYING file in the top-level |
| * directory. |
| */ |
| |
| #include "libc.h" |
| #include "s390-ccw.h" |
| #include "virtio.h" |
| |
| char stack[PAGE_SIZE * 8] __attribute__((__aligned__(PAGE_SIZE))); |
| static SubChannelId blk_schid = { .one = 1 }; |
| IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE))); |
| static char loadparm[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; |
| |
| /* |
| * Priniciples of Operations (SA22-7832-09) chapter 17 requires that |
| * a subsystem-identification is at 184-187 and bytes 188-191 are zero |
| * after list-directed-IPL and ccw-IPL. |
| */ |
| void write_subsystem_identification(void) |
| { |
| SubChannelId *schid = (SubChannelId *) 184; |
| uint32_t *zeroes = (uint32_t *) 188; |
| |
| *schid = blk_schid; |
| *zeroes = 0; |
| } |
| |
| void panic(const char *string) |
| { |
| sclp_print(string); |
| disabled_wait(); |
| while (1) { } |
| } |
| |
| unsigned int get_loadparm_index(void) |
| { |
| const char *lp = loadparm; |
| int i; |
| unsigned int idx = 0; |
| |
| for (i = 0; i < 8; i++) { |
| char c = lp[i]; |
| |
| if (c < '0' || c > '9') { |
| break; |
| } |
| |
| idx *= 10; |
| idx += c - '0'; |
| } |
| |
| return idx; |
| } |
| |
| static bool find_dev(Schib *schib, int dev_no) |
| { |
| int i, r; |
| |
| for (i = 0; i < 0x10000; i++) { |
| blk_schid.sch_no = i; |
| r = stsch_err(blk_schid, schib); |
| if ((r == 3) || (r == -EIO)) { |
| break; |
| } |
| if (!schib->pmcw.dnv) { |
| continue; |
| } |
| if (!virtio_is_supported(blk_schid)) { |
| continue; |
| } |
| /* Skip net devices since no IPLB is created and therefore no |
| * no network bootloader has been loaded |
| */ |
| if (virtio_get_device_type() == VIRTIO_ID_NET && dev_no < 0) { |
| continue; |
| } |
| if ((dev_no < 0) || (schib->pmcw.dev == dev_no)) { |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static void virtio_setup(void) |
| { |
| Schib schib; |
| int ssid; |
| bool found = false; |
| uint16_t dev_no; |
| char ldp[] = "LOADPARM=[________]\n"; |
| VDev *vdev = virtio_get_device(); |
| |
| /* |
| * We unconditionally enable mss support. In every sane configuration, |
| * this will succeed; and even if it doesn't, stsch_err() can deal |
| * with the consequences. |
| */ |
| enable_mss_facility(); |
| |
| sclp_get_loadparm_ascii(loadparm); |
| memcpy(ldp + 10, loadparm, 8); |
| sclp_print(ldp); |
| |
| if (store_iplb(&iplb)) { |
| switch (iplb.pbt) { |
| case S390_IPL_TYPE_CCW: |
| dev_no = iplb.ccw.devno; |
| debug_print_int("device no. ", dev_no); |
| blk_schid.ssid = iplb.ccw.ssid & 0x3; |
| debug_print_int("ssid ", blk_schid.ssid); |
| found = find_dev(&schib, dev_no); |
| break; |
| case S390_IPL_TYPE_QEMU_SCSI: |
| vdev->scsi_device_selected = true; |
| vdev->selected_scsi_device.channel = iplb.scsi.channel; |
| vdev->selected_scsi_device.target = iplb.scsi.target; |
| vdev->selected_scsi_device.lun = iplb.scsi.lun; |
| blk_schid.ssid = iplb.scsi.ssid & 0x3; |
| found = find_dev(&schib, iplb.scsi.devno); |
| break; |
| default: |
| panic("List-directed IPL not supported yet!\n"); |
| } |
| } else { |
| for (ssid = 0; ssid < 0x3; ssid++) { |
| blk_schid.ssid = ssid; |
| found = find_dev(&schib, -1); |
| if (found) { |
| break; |
| } |
| } |
| } |
| |
| IPL_assert(found, "No virtio device found"); |
| |
| if (virtio_get_device_type() == VIRTIO_ID_NET) { |
| sclp_print("Network boot device detected\n"); |
| vdev->netboot_start_addr = iplb.ccw.netboot_start_addr; |
| } else { |
| virtio_blk_setup_device(blk_schid); |
| |
| IPL_assert(virtio_ipl_disk_is_valid(), "No valid IPL device detected"); |
| } |
| } |
| |
| int main(void) |
| { |
| sclp_setup(); |
| virtio_setup(); |
| |
| zipl_load(); /* no return */ |
| |
| panic("Failed to load OS from hard disk\n"); |
| return 0; /* make compiler happy */ |
| } |