| /* |
| * QEMU PC System Emulator |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include <stdarg.h> |
| #include <string.h> |
| #include <getopt.h> |
| #include <inttypes.h> |
| #include <unistd.h> |
| #include <sys/mman.h> |
| #include <fcntl.h> |
| #include <signal.h> |
| #include <time.h> |
| #include <sys/time.h> |
| #include <malloc.h> |
| #include <termios.h> |
| #include <sys/poll.h> |
| #include <errno.h> |
| #include <sys/wait.h> |
| |
| #include <sys/ioctl.h> |
| #include <sys/socket.h> |
| #include <linux/if.h> |
| #include <linux/if_tun.h> |
| |
| #include "cpu-i386.h" |
| #include "disas.h" |
| |
| #define DEBUG_LOGFILE "/tmp/vl.log" |
| #define DEFAULT_NETWORK_SCRIPT "/etc/vl-ifup" |
| |
| //#define DEBUG_UNUSED_IOPORT |
| |
| #define PHYS_RAM_BASE 0xa8000000 |
| #define KERNEL_LOAD_ADDR 0x00100000 |
| #define INITRD_LOAD_ADDR 0x00400000 |
| #define KERNEL_PARAMS_ADDR 0x00090000 |
| |
| /* from plex86 (BSD license) */ |
| struct __attribute__ ((packed)) linux_params { |
| // For 0x00..0x3f, see 'struct screen_info' in linux/include/linux/tty.h. |
| // I just padded out the VESA parts, rather than define them. |
| |
| /* 0x000 */ uint8_t orig_x; |
| /* 0x001 */ uint8_t orig_y; |
| /* 0x002 */ uint16_t ext_mem_k; |
| /* 0x004 */ uint16_t orig_video_page; |
| /* 0x006 */ uint8_t orig_video_mode; |
| /* 0x007 */ uint8_t orig_video_cols; |
| /* 0x008 */ uint16_t unused1; |
| /* 0x00a */ uint16_t orig_video_ega_bx; |
| /* 0x00c */ uint16_t unused2; |
| /* 0x00e */ uint8_t orig_video_lines; |
| /* 0x00f */ uint8_t orig_video_isVGA; |
| /* 0x010 */ uint16_t orig_video_points; |
| /* 0x012 */ uint8_t pad0[0x20 - 0x12]; // VESA info. |
| /* 0x020 */ uint16_t cl_magic; // Commandline magic number (0xA33F) |
| /* 0x022 */ uint16_t cl_offset; // Commandline offset. Address of commandline |
| // is calculated as 0x90000 + cl_offset, bu |
| // only if cl_magic == 0xA33F. |
| /* 0x024 */ uint8_t pad1[0x40 - 0x24]; // VESA info. |
| |
| /* 0x040 */ uint8_t apm_bios_info[20]; // struct apm_bios_info |
| /* 0x054 */ uint8_t pad2[0x80 - 0x54]; |
| |
| // Following 2 from 'struct drive_info_struct' in drivers/block/cciss.h. |
| // Might be truncated? |
| /* 0x080 */ uint8_t hd0_info[16]; // hd0-disk-parameter from intvector 0x41 |
| /* 0x090 */ uint8_t hd1_info[16]; // hd1-disk-parameter from intvector 0x46 |
| |
| // System description table truncated to 16 bytes |
| // From 'struct sys_desc_table_struct' in linux/arch/i386/kernel/setup.c. |
| /* 0x0a0 */ uint16_t sys_description_len; |
| /* 0x0a2 */ uint8_t sys_description_table[14]; |
| // [0] machine id |
| // [1] machine submodel id |
| // [2] BIOS revision |
| // [3] bit1: MCA bus |
| |
| /* 0x0b0 */ uint8_t pad3[0x1e0 - 0xb0]; |
| /* 0x1e0 */ uint32_t alt_mem_k; |
| /* 0x1e4 */ uint8_t pad4[4]; |
| /* 0x1e8 */ uint8_t e820map_entries; |
| /* 0x1e9 */ uint8_t eddbuf_entries; // EDD_NR |
| /* 0x1ea */ uint8_t pad5[0x1f1 - 0x1ea]; |
| /* 0x1f1 */ uint8_t setup_sects; // size of setup.S, number of sectors |
| /* 0x1f2 */ uint16_t mount_root_rdonly; // MOUNT_ROOT_RDONLY (if !=0) |
| /* 0x1f4 */ uint16_t sys_size; // size of compressed kernel-part in the |
| // (b)zImage-file (in 16 byte units, rounded up) |
| /* 0x1f6 */ uint16_t swap_dev; // (unused AFAIK) |
| /* 0x1f8 */ uint16_t ramdisk_flags; |
| /* 0x1fa */ uint16_t vga_mode; // (old one) |
| /* 0x1fc */ uint16_t orig_root_dev; // (high=Major, low=minor) |
| /* 0x1fe */ uint8_t pad6[1]; |
| /* 0x1ff */ uint8_t aux_device_info; |
| /* 0x200 */ uint16_t jump_setup; // Jump to start of setup code, |
| // aka "reserved" field. |
| /* 0x202 */ uint8_t setup_signature[4]; // Signature for SETUP-header, ="HdrS" |
| /* 0x206 */ uint16_t header_format_version; // Version number of header format; |
| /* 0x208 */ uint8_t setup_S_temp0[8]; // Used by setup.S for communication with |
| // boot loaders, look there. |
| /* 0x210 */ uint8_t loader_type; |
| // 0 for old one. |
| // else 0xTV: |
| // T=0: LILO |
| // T=1: Loadlin |
| // T=2: bootsect-loader |
| // T=3: SYSLINUX |
| // T=4: ETHERBOOT |
| // V=version |
| /* 0x211 */ uint8_t loadflags; |
| // bit0 = 1: kernel is loaded high (bzImage) |
| // bit7 = 1: Heap and pointer (see below) set by boot |
| // loader. |
| /* 0x212 */ uint16_t setup_S_temp1; |
| /* 0x214 */ uint32_t kernel_start; |
| /* 0x218 */ uint32_t initrd_start; |
| /* 0x21c */ uint32_t initrd_size; |
| /* 0x220 */ uint8_t setup_S_temp2[4]; |
| /* 0x224 */ uint16_t setup_S_heap_end_pointer; |
| /* 0x226 */ uint8_t pad7[0x2d0 - 0x226]; |
| |
| /* 0x2d0 : Int 15, ax=e820 memory map. */ |
| // (linux/include/asm-i386/e820.h, 'struct e820entry') |
| #define E820MAX 32 |
| #define E820_RAM 1 |
| #define E820_RESERVED 2 |
| #define E820_ACPI 3 /* usable as RAM once ACPI tables have been read */ |
| #define E820_NVS 4 |
| struct { |
| uint64_t addr; |
| uint64_t size; |
| uint32_t type; |
| } e820map[E820MAX]; |
| |
| /* 0x550 */ uint8_t pad8[0x600 - 0x550]; |
| |
| // BIOS Enhanced Disk Drive Services. |
| // (From linux/include/asm-i386/edd.h, 'struct edd_info') |
| // Each 'struct edd_info is 78 bytes, times a max of 6 structs in array. |
| /* 0x600 */ uint8_t eddbuf[0x7d4 - 0x600]; |
| |
| /* 0x7d4 */ uint8_t pad9[0x800 - 0x7d4]; |
| /* 0x800 */ uint8_t commandline[0x800]; |
| |
| /* 0x1000 */ |
| uint64_t gdt_table[256]; |
| uint64_t idt_table[48]; |
| }; |
| |
| #define KERNEL_CS 0x10 |
| #define KERNEL_DS 0x18 |
| |
| typedef void (IOPortWriteFunc)(CPUX86State *env, uint32_t address, uint32_t data); |
| typedef uint32_t (IOPortReadFunc)(CPUX86State *env, uint32_t address); |
| |
| #define MAX_IOPORTS 1024 |
| |
| char phys_ram_file[1024]; |
| CPUX86State *global_env; |
| CPUX86State *cpu_single_env; |
| FILE *logfile = NULL; |
| int loglevel; |
| IOPortReadFunc *ioport_readb_table[MAX_IOPORTS]; |
| IOPortWriteFunc *ioport_writeb_table[MAX_IOPORTS]; |
| IOPortReadFunc *ioport_readw_table[MAX_IOPORTS]; |
| IOPortWriteFunc *ioport_writew_table[MAX_IOPORTS]; |
| |
| /***********************************************************/ |
| /* x86 io ports */ |
| |
| uint32_t default_ioport_readb(CPUX86State *env, uint32_t address) |
| { |
| #ifdef DEBUG_UNUSED_IOPORT |
| fprintf(stderr, "inb: port=0x%04x\n", address); |
| #endif |
| return 0; |
| } |
| |
| void default_ioport_writeb(CPUX86State *env, uint32_t address, uint32_t data) |
| { |
| #ifdef DEBUG_UNUSED_IOPORT |
| fprintf(stderr, "outb: port=0x%04x data=0x%02x\n", address, data); |
| #endif |
| } |
| |
| /* default is to make two byte accesses */ |
| uint32_t default_ioport_readw(CPUX86State *env, uint32_t address) |
| { |
| uint32_t data; |
| data = ioport_readb_table[address](env, address); |
| data |= ioport_readb_table[address + 1](env, address + 1) << 8; |
| return data; |
| } |
| |
| void default_ioport_writew(CPUX86State *env, uint32_t address, uint32_t data) |
| { |
| ioport_writeb_table[address](env, address, data & 0xff); |
| ioport_writeb_table[address + 1](env, address + 1, (data >> 8) & 0xff); |
| } |
| |
| void init_ioports(void) |
| { |
| int i; |
| |
| for(i = 0; i < MAX_IOPORTS; i++) { |
| ioport_readb_table[i] = default_ioport_readb; |
| ioport_writeb_table[i] = default_ioport_writeb; |
| ioport_readw_table[i] = default_ioport_readw; |
| ioport_writew_table[i] = default_ioport_writew; |
| } |
| } |
| |
| int register_ioport_readb(int start, int length, IOPortReadFunc *func) |
| { |
| int i; |
| |
| for(i = start; i < start + length; i++) |
| ioport_readb_table[i] = func; |
| return 0; |
| } |
| |
| int register_ioport_writeb(int start, int length, IOPortWriteFunc *func) |
| { |
| int i; |
| |
| for(i = start; i < start + length; i++) |
| ioport_writeb_table[i] = func; |
| return 0; |
| } |
| |
| int register_ioport_readw(int start, int length, IOPortReadFunc *func) |
| { |
| int i; |
| |
| for(i = start; i < start + length; i += 2) |
| ioport_readw_table[i] = func; |
| return 0; |
| } |
| |
| int register_ioport_writew(int start, int length, IOPortWriteFunc *func) |
| { |
| int i; |
| |
| for(i = start; i < start + length; i += 2) |
| ioport_writew_table[i] = func; |
| return 0; |
| } |
| |
| void pstrcpy(char *buf, int buf_size, const char *str) |
| { |
| int c; |
| char *q = buf; |
| |
| if (buf_size <= 0) |
| return; |
| |
| for(;;) { |
| c = *str++; |
| if (c == 0 || q >= buf + buf_size - 1) |
| break; |
| *q++ = c; |
| } |
| *q = '\0'; |
| } |
| |
| /* strcat and truncate. */ |
| char *pstrcat(char *buf, int buf_size, const char *s) |
| { |
| int len; |
| len = strlen(buf); |
| if (len < buf_size) |
| pstrcpy(buf + len, buf_size - len, s); |
| return buf; |
| } |
| |
| int load_kernel(const char *filename, uint8_t *addr) |
| { |
| int fd, size, setup_sects; |
| uint8_t bootsect[512]; |
| |
| fd = open(filename, O_RDONLY); |
| if (fd < 0) |
| return -1; |
| if (read(fd, bootsect, 512) != 512) |
| goto fail; |
| setup_sects = bootsect[0x1F1]; |
| if (!setup_sects) |
| setup_sects = 4; |
| /* skip 16 bit setup code */ |
| lseek(fd, (setup_sects + 1) * 512, SEEK_SET); |
| size = read(fd, addr, 16 * 1024 * 1024); |
| if (size < 0) |
| goto fail; |
| close(fd); |
| return size; |
| fail: |
| close(fd); |
| return -1; |
| } |
| |
| /* return the size or -1 if error */ |
| int load_image(const char *filename, uint8_t *addr) |
| { |
| int fd, size; |
| fd = open(filename, O_RDONLY); |
| if (fd < 0) |
| return -1; |
| size = lseek(fd, 0, SEEK_END); |
| lseek(fd, 0, SEEK_SET); |
| if (read(fd, addr, size) != size) { |
| close(fd); |
| return -1; |
| } |
| close(fd); |
| return size; |
| } |
| |
| void cpu_x86_outb(CPUX86State *env, int addr, int val) |
| { |
| ioport_writeb_table[addr & (MAX_IOPORTS - 1)](env, addr, val); |
| } |
| |
| void cpu_x86_outw(CPUX86State *env, int addr, int val) |
| { |
| ioport_writew_table[addr & (MAX_IOPORTS - 1)](env, addr, val); |
| } |
| |
| void cpu_x86_outl(CPUX86State *env, int addr, int val) |
| { |
| fprintf(stderr, "outl: port=0x%04x, data=%08x\n", addr, val); |
| } |
| |
| int cpu_x86_inb(CPUX86State *env, int addr) |
| { |
| return ioport_readb_table[addr & (MAX_IOPORTS - 1)](env, addr); |
| } |
| |
| int cpu_x86_inw(CPUX86State *env, int addr) |
| { |
| return ioport_readw_table[addr & (MAX_IOPORTS - 1)](env, addr); |
| } |
| |
| int cpu_x86_inl(CPUX86State *env, int addr) |
| { |
| fprintf(stderr, "inl: port=0x%04x\n", addr); |
| return 0; |
| } |
| |
| /***********************************************************/ |
| void ioport80_write(CPUX86State *env, uint32_t addr, uint32_t data) |
| { |
| } |
| |
| void hw_error(const char *fmt, ...) |
| { |
| va_list ap; |
| |
| va_start(ap, fmt); |
| fprintf(stderr, "qemu: hardware error: "); |
| vfprintf(stderr, fmt, ap); |
| fprintf(stderr, "\n"); |
| #ifdef TARGET_I386 |
| cpu_x86_dump_state(global_env, stderr, X86_DUMP_FPU | X86_DUMP_CCOP); |
| #endif |
| va_end(ap); |
| abort(); |
| } |
| |
| /***********************************************************/ |
| /* vga emulation */ |
| static uint8_t vga_index; |
| static uint8_t vga_regs[256]; |
| static int last_cursor_pos; |
| |
| void update_console_messages(void) |
| { |
| int c, i, cursor_pos, eol; |
| |
| cursor_pos = vga_regs[0x0f] | (vga_regs[0x0e] << 8); |
| eol = 0; |
| for(i = last_cursor_pos; i < cursor_pos; i++) { |
| c = phys_ram_base[0xb8000 + (i) * 2]; |
| if (c >= ' ') { |
| putchar(c); |
| eol = 0; |
| } else { |
| if (!eol) |
| putchar('\n'); |
| eol = 1; |
| } |
| } |
| fflush(stdout); |
| last_cursor_pos = cursor_pos; |
| } |
| |
| /* just to see first Linux console messages, we intercept cursor position */ |
| void vga_ioport_write(CPUX86State *env, uint32_t addr, uint32_t data) |
| { |
| switch(addr) { |
| case 0x3d4: |
| vga_index = data; |
| break; |
| case 0x3d5: |
| vga_regs[vga_index] = data; |
| if (vga_index == 0x0f) |
| update_console_messages(); |
| break; |
| } |
| |
| } |
| |
| /***********************************************************/ |
| /* cmos emulation */ |
| |
| #define RTC_SECONDS 0 |
| #define RTC_SECONDS_ALARM 1 |
| #define RTC_MINUTES 2 |
| #define RTC_MINUTES_ALARM 3 |
| #define RTC_HOURS 4 |
| #define RTC_HOURS_ALARM 5 |
| #define RTC_ALARM_DONT_CARE 0xC0 |
| |
| #define RTC_DAY_OF_WEEK 6 |
| #define RTC_DAY_OF_MONTH 7 |
| #define RTC_MONTH 8 |
| #define RTC_YEAR 9 |
| |
| #define RTC_REG_A 10 |
| #define RTC_REG_B 11 |
| #define RTC_REG_C 12 |
| #define RTC_REG_D 13 |
| |
| /* PC cmos mappings */ |
| #define REG_EQUIPMENT_BYTE 0x14 |
| |
| uint8_t cmos_data[128]; |
| uint8_t cmos_index; |
| |
| void cmos_ioport_write(CPUX86State *env, uint32_t addr, uint32_t data) |
| { |
| if (addr == 0x70) { |
| cmos_index = data & 0x7f; |
| } |
| } |
| |
| uint32_t cmos_ioport_read(CPUX86State *env, uint32_t addr) |
| { |
| int ret; |
| |
| if (addr == 0x70) { |
| return 0xff; |
| } else { |
| /* toggle update-in-progress bit for Linux (same hack as |
| plex86) */ |
| ret = cmos_data[cmos_index]; |
| if (cmos_index == RTC_REG_A) |
| cmos_data[RTC_REG_A] ^= 0x80; |
| else if (cmos_index == RTC_REG_C) |
| cmos_data[RTC_REG_C] = 0x00; |
| return ret; |
| } |
| } |
| |
| |
| static inline int to_bcd(int a) |
| { |
| return ((a / 10) << 4) | (a % 10); |
| } |
| |
| void cmos_init(void) |
| { |
| struct tm *tm; |
| time_t ti; |
| |
| ti = time(NULL); |
| tm = gmtime(&ti); |
| cmos_data[RTC_SECONDS] = to_bcd(tm->tm_sec); |
| cmos_data[RTC_MINUTES] = to_bcd(tm->tm_min); |
| cmos_data[RTC_HOURS] = to_bcd(tm->tm_hour); |
| cmos_data[RTC_DAY_OF_WEEK] = to_bcd(tm->tm_wday); |
| cmos_data[RTC_DAY_OF_MONTH] = to_bcd(tm->tm_mday); |
| cmos_data[RTC_MONTH] = to_bcd(tm->tm_mon); |
| cmos_data[RTC_YEAR] = to_bcd(tm->tm_year % 100); |
| |
| cmos_data[RTC_REG_A] = 0x26; |
| cmos_data[RTC_REG_B] = 0x02; |
| cmos_data[RTC_REG_C] = 0x00; |
| cmos_data[RTC_REG_D] = 0x80; |
| |
| cmos_data[REG_EQUIPMENT_BYTE] = 0x02; /* FPU is there */ |
| |
| register_ioport_writeb(0x70, 2, cmos_ioport_write); |
| register_ioport_readb(0x70, 2, cmos_ioport_read); |
| } |
| |
| /***********************************************************/ |
| /* 8259 pic emulation */ |
| |
| typedef struct PicState { |
| uint8_t last_irr; /* edge detection */ |
| uint8_t irr; /* interrupt request register */ |
| uint8_t imr; /* interrupt mask register */ |
| uint8_t isr; /* interrupt service register */ |
| uint8_t priority_add; /* used to compute irq priority */ |
| uint8_t irq_base; |
| uint8_t read_reg_select; |
| uint8_t special_mask; |
| uint8_t init_state; |
| uint8_t auto_eoi; |
| uint8_t rotate_on_autoeoi; |
| uint8_t init4; /* true if 4 byte init */ |
| } PicState; |
| |
| /* 0 is master pic, 1 is slave pic */ |
| PicState pics[2]; |
| int pic_irq_requested; |
| |
| /* set irq level. If an edge is detected, then the IRR is set to 1 */ |
| static inline void pic_set_irq1(PicState *s, int irq, int level) |
| { |
| int mask; |
| mask = 1 << irq; |
| if (level) { |
| if ((s->last_irr & mask) == 0) |
| s->irr |= mask; |
| s->last_irr |= mask; |
| } else { |
| s->last_irr &= ~mask; |
| } |
| } |
| |
| static inline int get_priority(PicState *s, int mask) |
| { |
| int priority; |
| if (mask == 0) |
| return -1; |
| priority = 7; |
| while ((mask & (1 << ((priority + s->priority_add) & 7))) == 0) |
| priority--; |
| return priority; |
| } |
| |
| /* return the pic wanted interrupt. return -1 if none */ |
| static int pic_get_irq(PicState *s) |
| { |
| int mask, cur_priority, priority; |
| |
| mask = s->irr & ~s->imr; |
| priority = get_priority(s, mask); |
| if (priority < 0) |
| return -1; |
| /* compute current priority */ |
| cur_priority = get_priority(s, s->isr); |
| if (priority > cur_priority) { |
| /* higher priority found: an irq should be generated */ |
| return priority; |
| } else { |
| return -1; |
| } |
| } |
| |
| void pic_set_irq(int irq, int level) |
| { |
| pic_set_irq1(&pics[irq >> 3], irq & 7, level); |
| } |
| |
| /* can be called at any time outside cpu_exec() to raise irqs if |
| necessary */ |
| void pic_handle_irq(void) |
| { |
| int irq2, irq; |
| |
| /* first look at slave pic */ |
| irq2 = pic_get_irq(&pics[1]); |
| if (irq2 >= 0) { |
| /* if irq request by slave pic, signal master PIC */ |
| pic_set_irq1(&pics[0], 2, 1); |
| pic_set_irq1(&pics[0], 2, 0); |
| } |
| /* look at requested irq */ |
| irq = pic_get_irq(&pics[0]); |
| if (irq >= 0) { |
| if (irq == 2) { |
| /* from slave pic */ |
| pic_irq_requested = 8 + irq2; |
| } else { |
| /* from master pic */ |
| pic_irq_requested = irq; |
| } |
| global_env->hard_interrupt_request = 1; |
| } |
| } |
| |
| int cpu_x86_get_pic_interrupt(CPUX86State *env) |
| { |
| int irq, irq2, intno; |
| |
| /* signal the pic that the irq was acked by the CPU */ |
| irq = pic_irq_requested; |
| if (irq >= 8) { |
| irq2 = irq & 7; |
| pics[1].isr |= (1 << irq2); |
| pics[1].irr &= ~(1 << irq2); |
| irq = 2; |
| intno = pics[1].irq_base + irq2; |
| } else { |
| intno = pics[0].irq_base + irq; |
| } |
| pics[0].isr |= (1 << irq); |
| pics[0].irr &= ~(1 << irq); |
| return intno; |
| } |
| |
| void pic_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val) |
| { |
| PicState *s; |
| int priority; |
| |
| s = &pics[addr >> 7]; |
| addr &= 1; |
| if (addr == 0) { |
| if (val & 0x10) { |
| /* init */ |
| memset(s, 0, sizeof(PicState)); |
| s->init_state = 1; |
| s->init4 = val & 1; |
| if (val & 0x02) |
| hw_error("single mode not supported"); |
| if (val & 0x08) |
| hw_error("level sensitive irq not supported"); |
| } else if (val & 0x08) { |
| if (val & 0x02) |
| s->read_reg_select = val & 1; |
| if (val & 0x40) |
| s->special_mask = (val >> 5) & 1; |
| } else { |
| switch(val) { |
| case 0x00: |
| case 0x80: |
| s->rotate_on_autoeoi = val >> 7; |
| break; |
| case 0x20: /* end of interrupt */ |
| case 0xa0: |
| priority = get_priority(s, s->isr); |
| if (priority >= 0) { |
| s->isr &= ~(1 << ((priority + s->priority_add) & 7)); |
| } |
| if (val == 0xa0) |
| s->priority_add = (s->priority_add + 1) & 7; |
| break; |
| case 0x60 ... 0x67: |
| priority = val & 7; |
| s->isr &= ~(1 << priority); |
| break; |
| case 0xc0 ... 0xc7: |
| s->priority_add = (val + 1) & 7; |
| break; |
| case 0xe0 ... 0xe7: |
| priority = val & 7; |
| s->isr &= ~(1 << priority); |
| s->priority_add = (priority + 1) & 7; |
| break; |
| } |
| } |
| } else { |
| switch(s->init_state) { |
| case 0: |
| /* normal mode */ |
| s->imr = val; |
| break; |
| case 1: |
| s->irq_base = val & 0xf8; |
| s->init_state = 2; |
| break; |
| case 2: |
| if (s->init4) { |
| s->init_state = 3; |
| } else { |
| s->init_state = 0; |
| } |
| break; |
| case 3: |
| s->auto_eoi = (val >> 1) & 1; |
| s->init_state = 0; |
| break; |
| } |
| } |
| } |
| |
| uint32_t pic_ioport_read(CPUX86State *env, uint32_t addr) |
| { |
| PicState *s; |
| s = &pics[addr >> 7]; |
| addr &= 1; |
| if (addr == 0) { |
| if (s->read_reg_select) |
| return s->isr; |
| else |
| return s->irr; |
| } else { |
| return s->imr; |
| } |
| } |
| |
| void pic_init(void) |
| { |
| register_ioport_writeb(0x20, 2, pic_ioport_write); |
| register_ioport_readb(0x20, 2, pic_ioport_read); |
| register_ioport_writeb(0xa0, 2, pic_ioport_write); |
| register_ioport_readb(0xa0, 2, pic_ioport_read); |
| } |
| |
| /***********************************************************/ |
| /* 8253 PIT emulation */ |
| |
| #define PIT_FREQ 1193182 |
| |
| #define RW_STATE_LSB 0 |
| #define RW_STATE_MSB 1 |
| #define RW_STATE_WORD0 2 |
| #define RW_STATE_WORD1 3 |
| #define RW_STATE_LATCHED_WORD0 4 |
| #define RW_STATE_LATCHED_WORD1 5 |
| |
| typedef struct PITChannelState { |
| uint16_t count; |
| uint16_t latched_count; |
| uint8_t rw_state; |
| uint8_t mode; |
| uint8_t bcd; /* not supported */ |
| uint8_t gate; /* timer start */ |
| int64_t count_load_time; |
| } PITChannelState; |
| |
| PITChannelState pit_channels[3]; |
| int speaker_data_on; |
| |
| int64_t ticks_per_sec; |
| |
| int64_t get_clock(void) |
| { |
| struct timeval tv; |
| gettimeofday(&tv, NULL); |
| return tv.tv_sec * 1000000LL + tv.tv_usec; |
| } |
| |
| int64_t cpu_get_ticks(void) |
| { |
| int64_t val; |
| asm("rdtsc" : "=A" (val)); |
| return val; |
| } |
| |
| void cpu_calibrate_ticks(void) |
| { |
| int64_t usec, ticks; |
| |
| usec = get_clock(); |
| ticks = cpu_get_ticks(); |
| usleep(50 * 1000); |
| usec = get_clock() - usec; |
| ticks = cpu_get_ticks() - ticks; |
| ticks_per_sec = (ticks * 1000000LL + (usec >> 1)) / usec; |
| } |
| |
| static int pit_get_count(PITChannelState *s) |
| { |
| int64_t d; |
| int counter; |
| |
| d = ((cpu_get_ticks() - s->count_load_time) * PIT_FREQ) / |
| ticks_per_sec; |
| switch(s->mode) { |
| case 0: |
| case 1: |
| case 4: |
| case 5: |
| counter = (s->count - d) & 0xffff; |
| break; |
| default: |
| counter = s->count - (d % s->count); |
| break; |
| } |
| return counter; |
| } |
| |
| /* get pit output bit */ |
| static int pit_get_out(PITChannelState *s) |
| { |
| int64_t d; |
| int out; |
| |
| d = ((cpu_get_ticks() - s->count_load_time) * PIT_FREQ) / |
| ticks_per_sec; |
| switch(s->mode) { |
| default: |
| case 0: |
| out = (d >= s->count); |
| break; |
| case 1: |
| out = (d < s->count); |
| break; |
| case 2: |
| if ((d % s->count) == 0 && d != 0) |
| out = 1; |
| else |
| out = 0; |
| break; |
| case 3: |
| out = (d % s->count) < (s->count >> 1); |
| break; |
| case 4: |
| case 5: |
| out = (d == s->count); |
| break; |
| } |
| return out; |
| } |
| |
| void pit_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val) |
| { |
| int channel, access; |
| PITChannelState *s; |
| |
| addr &= 3; |
| if (addr == 3) { |
| channel = val >> 6; |
| if (channel == 3) |
| return; |
| s = &pit_channels[channel]; |
| access = (val >> 4) & 3; |
| switch(access) { |
| case 0: |
| s->latched_count = pit_get_count(s); |
| s->rw_state = RW_STATE_LATCHED_WORD0; |
| break; |
| default: |
| s->rw_state = access - 1 + RW_STATE_LSB; |
| break; |
| } |
| s->mode = (val >> 1) & 7; |
| s->bcd = val & 1; |
| } else { |
| s = &pit_channels[addr]; |
| switch(s->rw_state) { |
| case RW_STATE_LSB: |
| s->count_load_time = cpu_get_ticks(); |
| s->count = val; |
| break; |
| case RW_STATE_MSB: |
| s->count_load_time = cpu_get_ticks(); |
| s->count = (val << 8); |
| break; |
| case RW_STATE_WORD0: |
| case RW_STATE_WORD1: |
| if (s->rw_state & 1) { |
| s->count_load_time = cpu_get_ticks(); |
| s->count = (s->latched_count & 0xff) | (val << 8); |
| } else { |
| s->latched_count = val; |
| } |
| s->rw_state ^= 1; |
| break; |
| } |
| } |
| } |
| |
| uint32_t pit_ioport_read(CPUX86State *env, uint32_t addr) |
| { |
| int ret, count; |
| PITChannelState *s; |
| |
| addr &= 3; |
| s = &pit_channels[addr]; |
| switch(s->rw_state) { |
| case RW_STATE_LSB: |
| case RW_STATE_MSB: |
| case RW_STATE_WORD0: |
| case RW_STATE_WORD1: |
| count = pit_get_count(s); |
| if (s->rw_state & 1) |
| ret = (count >> 8) & 0xff; |
| else |
| ret = count & 0xff; |
| if (s->rw_state & 2) |
| s->rw_state ^= 1; |
| break; |
| default: |
| case RW_STATE_LATCHED_WORD0: |
| case RW_STATE_LATCHED_WORD1: |
| if (s->rw_state & 1) |
| ret = s->latched_count >> 8; |
| else |
| ret = s->latched_count & 0xff; |
| s->rw_state ^= 1; |
| break; |
| } |
| return ret; |
| } |
| |
| void speaker_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val) |
| { |
| speaker_data_on = (val >> 1) & 1; |
| pit_channels[2].gate = val & 1; |
| } |
| |
| uint32_t speaker_ioport_read(CPUX86State *env, uint32_t addr) |
| { |
| int out; |
| out = pit_get_out(&pit_channels[2]); |
| return (speaker_data_on << 1) | pit_channels[2].gate | (out << 5); |
| } |
| |
| void pit_init(void) |
| { |
| pit_channels[0].gate = 1; |
| pit_channels[1].gate = 1; |
| pit_channels[2].gate = 0; |
| |
| register_ioport_writeb(0x40, 4, pit_ioport_write); |
| register_ioport_readb(0x40, 3, pit_ioport_read); |
| |
| register_ioport_readb(0x61, 1, speaker_ioport_read); |
| register_ioport_writeb(0x61, 1, speaker_ioport_write); |
| cpu_calibrate_ticks(); |
| } |
| |
| /***********************************************************/ |
| /* serial port emulation */ |
| |
| #define UART_IRQ 4 |
| |
| #define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ |
| |
| #define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ |
| #define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ |
| #define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ |
| #define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ |
| |
| #define UART_IIR_NO_INT 0x01 /* No interrupts pending */ |
| #define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ |
| |
| #define UART_IIR_MSI 0x00 /* Modem status interrupt */ |
| #define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ |
| #define UART_IIR_RDI 0x04 /* Receiver data interrupt */ |
| #define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ |
| |
| #define UART_LSR_TEMT 0x40 /* Transmitter empty */ |
| #define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ |
| #define UART_LSR_BI 0x10 /* Break interrupt indicator */ |
| #define UART_LSR_FE 0x08 /* Frame error indicator */ |
| #define UART_LSR_PE 0x04 /* Parity error indicator */ |
| #define UART_LSR_OE 0x02 /* Overrun error indicator */ |
| #define UART_LSR_DR 0x01 /* Receiver data ready */ |
| |
| typedef struct SerialState { |
| uint8_t divider; |
| uint8_t rbr; /* receive register */ |
| uint8_t ier; |
| uint8_t iir; /* read only */ |
| uint8_t lcr; |
| uint8_t mcr; |
| uint8_t lsr; /* read only */ |
| uint8_t msr; |
| uint8_t scr; |
| } SerialState; |
| |
| SerialState serial_ports[1]; |
| |
| void serial_update_irq(void) |
| { |
| SerialState *s = &serial_ports[0]; |
| |
| if ((s->lsr & UART_LSR_DR) && (s->ier & UART_IER_RDI)) { |
| s->iir = UART_IIR_RDI; |
| } else if ((s->lsr & UART_LSR_THRE) && (s->ier & UART_IER_THRI)) { |
| s->iir = UART_IIR_THRI; |
| } else { |
| s->iir = UART_IIR_NO_INT; |
| } |
| if (s->iir != UART_IIR_NO_INT) { |
| pic_set_irq(UART_IRQ, 1); |
| } else { |
| pic_set_irq(UART_IRQ, 0); |
| } |
| } |
| |
| void serial_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val) |
| { |
| SerialState *s = &serial_ports[0]; |
| unsigned char ch; |
| int ret; |
| |
| addr &= 7; |
| switch(addr) { |
| default: |
| case 0: |
| if (s->lcr & UART_LCR_DLAB) { |
| s->divider = (s->divider & 0xff00) | val; |
| } else { |
| s->lsr &= ~UART_LSR_THRE; |
| serial_update_irq(); |
| |
| ch = val; |
| do { |
| ret = write(1, &ch, 1); |
| } while (ret != 1); |
| s->lsr |= UART_LSR_THRE; |
| s->lsr |= UART_LSR_TEMT; |
| serial_update_irq(); |
| } |
| break; |
| case 1: |
| if (s->lcr & UART_LCR_DLAB) { |
| s->divider = (s->divider & 0x00ff) | (val << 8); |
| } else { |
| s->ier = val; |
| serial_update_irq(); |
| } |
| break; |
| case 2: |
| break; |
| case 3: |
| s->lcr = val; |
| break; |
| case 4: |
| s->mcr = val; |
| break; |
| case 5: |
| break; |
| case 6: |
| s->msr = val; |
| break; |
| case 7: |
| s->scr = val; |
| break; |
| } |
| } |
| |
| uint32_t serial_ioport_read(CPUX86State *env, uint32_t addr) |
| { |
| SerialState *s = &serial_ports[0]; |
| uint32_t ret; |
| |
| addr &= 7; |
| switch(addr) { |
| default: |
| case 0: |
| if (s->lcr & UART_LCR_DLAB) { |
| ret = s->divider & 0xff; |
| } else { |
| ret = s->rbr; |
| s->lsr &= ~(UART_LSR_DR | UART_LSR_BI); |
| serial_update_irq(); |
| } |
| break; |
| case 1: |
| if (s->lcr & UART_LCR_DLAB) { |
| ret = (s->divider >> 8) & 0xff; |
| } else { |
| ret = s->ier; |
| } |
| break; |
| case 2: |
| ret = s->iir; |
| break; |
| case 3: |
| ret = s->lcr; |
| break; |
| case 4: |
| ret = s->mcr; |
| break; |
| case 5: |
| ret = s->lsr; |
| break; |
| case 6: |
| ret = s->msr; |
| break; |
| case 7: |
| ret = s->scr; |
| break; |
| } |
| return ret; |
| } |
| |
| #define TERM_ESCAPE 0x01 /* ctrl-a is used for escape */ |
| static int term_got_escape; |
| |
| void term_print_help(void) |
| { |
| printf("\n" |
| "C-a h print this help\n" |
| "C-a x exit emulatior\n" |
| "C-a b send break (magic sysrq)\n" |
| "C-a C-a send C-a\n" |
| ); |
| } |
| |
| /* called when a char is received */ |
| void serial_received_byte(SerialState *s, int ch) |
| { |
| if (term_got_escape) { |
| term_got_escape = 0; |
| switch(ch) { |
| case 'h': |
| term_print_help(); |
| break; |
| case 'x': |
| exit(0); |
| break; |
| case 'b': |
| /* send break */ |
| s->rbr = 0; |
| s->lsr |= UART_LSR_BI | UART_LSR_DR; |
| serial_update_irq(); |
| break; |
| case TERM_ESCAPE: |
| goto send_char; |
| } |
| } else if (ch == TERM_ESCAPE) { |
| term_got_escape = 1; |
| } else { |
| send_char: |
| s->rbr = ch; |
| s->lsr |= UART_LSR_DR; |
| serial_update_irq(); |
| } |
| } |
| |
| /* init terminal so that we can grab keys */ |
| static struct termios oldtty; |
| |
| static void term_exit(void) |
| { |
| tcsetattr (0, TCSANOW, &oldtty); |
| } |
| |
| static void term_init(void) |
| { |
| struct termios tty; |
| |
| tcgetattr (0, &tty); |
| oldtty = tty; |
| |
| tty.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP |
| |INLCR|IGNCR|ICRNL|IXON); |
| tty.c_oflag |= OPOST; |
| tty.c_lflag &= ~(ECHO|ECHONL|ICANON|IEXTEN|ISIG); |
| tty.c_cflag &= ~(CSIZE|PARENB); |
| tty.c_cflag |= CS8; |
| tty.c_cc[VMIN] = 1; |
| tty.c_cc[VTIME] = 0; |
| |
| tcsetattr (0, TCSANOW, &tty); |
| |
| atexit(term_exit); |
| |
| fcntl(0, F_SETFL, O_NONBLOCK); |
| } |
| |
| void serial_init(void) |
| { |
| SerialState *s = &serial_ports[0]; |
| |
| s->lsr = UART_LSR_TEMT | UART_LSR_THRE; |
| |
| register_ioport_writeb(0x3f8, 8, serial_ioport_write); |
| register_ioport_readb(0x3f8, 8, serial_ioport_read); |
| |
| term_init(); |
| } |
| |
| /***********************************************************/ |
| /* ne2000 emulation */ |
| |
| //#define DEBUG_NE2000 |
| |
| #define NE2000_IOPORT 0x300 |
| #define NE2000_IRQ 9 |
| |
| #define MAX_ETH_FRAME_SIZE 1514 |
| |
| #define E8390_CMD 0x00 /* The command register (for all pages) */ |
| /* Page 0 register offsets. */ |
| #define EN0_CLDALO 0x01 /* Low byte of current local dma addr RD */ |
| #define EN0_STARTPG 0x01 /* Starting page of ring bfr WR */ |
| #define EN0_CLDAHI 0x02 /* High byte of current local dma addr RD */ |
| #define EN0_STOPPG 0x02 /* Ending page +1 of ring bfr WR */ |
| #define EN0_BOUNDARY 0x03 /* Boundary page of ring bfr RD WR */ |
| #define EN0_TSR 0x04 /* Transmit status reg RD */ |
| #define EN0_TPSR 0x04 /* Transmit starting page WR */ |
| #define EN0_NCR 0x05 /* Number of collision reg RD */ |
| #define EN0_TCNTLO 0x05 /* Low byte of tx byte count WR */ |
| #define EN0_FIFO 0x06 /* FIFO RD */ |
| #define EN0_TCNTHI 0x06 /* High byte of tx byte count WR */ |
| #define EN0_ISR 0x07 /* Interrupt status reg RD WR */ |
| #define EN0_CRDALO 0x08 /* low byte of current remote dma address RD */ |
| #define EN0_RSARLO 0x08 /* Remote start address reg 0 */ |
| #define EN0_CRDAHI 0x09 /* high byte, current remote dma address RD */ |
| #define EN0_RSARHI 0x09 /* Remote start address reg 1 */ |
| #define EN0_RCNTLO 0x0a /* Remote byte count reg WR */ |
| #define EN0_RCNTHI 0x0b /* Remote byte count reg WR */ |
| #define EN0_RSR 0x0c /* rx status reg RD */ |
| #define EN0_RXCR 0x0c /* RX configuration reg WR */ |
| #define EN0_TXCR 0x0d /* TX configuration reg WR */ |
| #define EN0_COUNTER0 0x0d /* Rcv alignment error counter RD */ |
| #define EN0_DCFG 0x0e /* Data configuration reg WR */ |
| #define EN0_COUNTER1 0x0e /* Rcv CRC error counter RD */ |
| #define EN0_IMR 0x0f /* Interrupt mask reg WR */ |
| #define EN0_COUNTER2 0x0f /* Rcv missed frame error counter RD */ |
| |
| #define EN1_PHYS 0x11 |
| #define EN1_CURPAG 0x17 |
| #define EN1_MULT 0x18 |
| |
| /* Register accessed at EN_CMD, the 8390 base addr. */ |
| #define E8390_STOP 0x01 /* Stop and reset the chip */ |
| #define E8390_START 0x02 /* Start the chip, clear reset */ |
| #define E8390_TRANS 0x04 /* Transmit a frame */ |
| #define E8390_RREAD 0x08 /* Remote read */ |
| #define E8390_RWRITE 0x10 /* Remote write */ |
| #define E8390_NODMA 0x20 /* Remote DMA */ |
| #define E8390_PAGE0 0x00 /* Select page chip registers */ |
| #define E8390_PAGE1 0x40 /* using the two high-order bits */ |
| #define E8390_PAGE2 0x80 /* Page 3 is invalid. */ |
| |
| /* Bits in EN0_ISR - Interrupt status register */ |
| #define ENISR_RX 0x01 /* Receiver, no error */ |
| #define ENISR_TX 0x02 /* Transmitter, no error */ |
| #define ENISR_RX_ERR 0x04 /* Receiver, with error */ |
| #define ENISR_TX_ERR 0x08 /* Transmitter, with error */ |
| #define ENISR_OVER 0x10 /* Receiver overwrote the ring */ |
| #define ENISR_COUNTERS 0x20 /* Counters need emptying */ |
| #define ENISR_RDC 0x40 /* remote dma complete */ |
| #define ENISR_RESET 0x80 /* Reset completed */ |
| #define ENISR_ALL 0x3f /* Interrupts we will enable */ |
| |
| /* Bits in received packet status byte and EN0_RSR*/ |
| #define ENRSR_RXOK 0x01 /* Received a good packet */ |
| #define ENRSR_CRC 0x02 /* CRC error */ |
| #define ENRSR_FAE 0x04 /* frame alignment error */ |
| #define ENRSR_FO 0x08 /* FIFO overrun */ |
| #define ENRSR_MPA 0x10 /* missed pkt */ |
| #define ENRSR_PHY 0x20 /* physical/multicast address */ |
| #define ENRSR_DIS 0x40 /* receiver disable. set in monitor mode */ |
| #define ENRSR_DEF 0x80 /* deferring */ |
| |
| /* Transmitted packet status, EN0_TSR. */ |
| #define ENTSR_PTX 0x01 /* Packet transmitted without error */ |
| #define ENTSR_ND 0x02 /* The transmit wasn't deferred. */ |
| #define ENTSR_COL 0x04 /* The transmit collided at least once. */ |
| #define ENTSR_ABT 0x08 /* The transmit collided 16 times, and was deferred. */ |
| #define ENTSR_CRS 0x10 /* The carrier sense was lost. */ |
| #define ENTSR_FU 0x20 /* A "FIFO underrun" occurred during transmit. */ |
| #define ENTSR_CDH 0x40 /* The collision detect "heartbeat" signal was lost. */ |
| #define ENTSR_OWC 0x80 /* There was an out-of-window collision. */ |
| |
| #define NE2000_MEM_SIZE 32768 |
| |
| typedef struct NE2000State { |
| uint8_t cmd; |
| uint32_t start; |
| uint32_t stop; |
| uint8_t boundary; |
| uint8_t tsr; |
| uint8_t tpsr; |
| uint16_t tcnt; |
| uint16_t rcnt; |
| uint32_t rsar; |
| uint8_t isr; |
| uint8_t dcfg; |
| uint8_t imr; |
| uint8_t phys[6]; /* mac address */ |
| uint8_t curpag; |
| uint8_t mult[8]; /* multicast mask array */ |
| uint8_t mem[NE2000_MEM_SIZE]; |
| } NE2000State; |
| |
| NE2000State ne2000_state; |
| int net_fd = -1; |
| char network_script[1024]; |
| |
| void ne2000_reset(void) |
| { |
| NE2000State *s = &ne2000_state; |
| int i; |
| |
| s->isr = ENISR_RESET; |
| s->mem[0] = 0x52; |
| s->mem[1] = 0x54; |
| s->mem[2] = 0x00; |
| s->mem[3] = 0x12; |
| s->mem[4] = 0x34; |
| s->mem[5] = 0x56; |
| s->mem[14] = 0x57; |
| s->mem[15] = 0x57; |
| |
| /* duplicate prom data */ |
| for(i = 15;i >= 0; i--) { |
| s->mem[2 * i] = s->mem[i]; |
| s->mem[2 * i + 1] = s->mem[i]; |
| } |
| } |
| |
| void ne2000_update_irq(NE2000State *s) |
| { |
| int isr; |
| isr = s->isr & s->imr; |
| if (isr) |
| pic_set_irq(NE2000_IRQ, 1); |
| else |
| pic_set_irq(NE2000_IRQ, 0); |
| } |
| |
| int net_init(void) |
| { |
| struct ifreq ifr; |
| int fd, ret, pid, status; |
| |
| fd = open("/dev/net/tun", O_RDWR); |
| if (fd < 0) { |
| fprintf(stderr, "warning: could not open /dev/net/tun: no virtual network emulation\n"); |
| return -1; |
| } |
| memset(&ifr, 0, sizeof(ifr)); |
| ifr.ifr_flags = IFF_TAP | IFF_NO_PI; |
| pstrcpy(ifr.ifr_name, IFNAMSIZ, "tun%d"); |
| ret = ioctl(fd, TUNSETIFF, (void *) &ifr); |
| if (ret != 0) { |
| fprintf(stderr, "warning: could not configure /dev/net/tun: no virtual network emulation\n"); |
| close(fd); |
| return -1; |
| } |
| printf("connected to host network interface: %s\n", ifr.ifr_name); |
| fcntl(fd, F_SETFL, O_NONBLOCK); |
| net_fd = fd; |
| |
| /* try to launch network init script */ |
| pid = fork(); |
| if (pid >= 0) { |
| if (pid == 0) { |
| execl(network_script, network_script, ifr.ifr_name, NULL); |
| exit(1); |
| } |
| while (waitpid(pid, &status, 0) != pid); |
| if (!WIFEXITED(status) || |
| WEXITSTATUS(status) != 0) { |
| fprintf(stderr, "%s: could not launch network script for '%s'\n", |
| network_script, ifr.ifr_name); |
| } |
| } |
| return 0; |
| } |
| |
| void net_send_packet(NE2000State *s, const uint8_t *buf, int size) |
| { |
| #ifdef DEBUG_NE2000 |
| printf("NE2000: sending packet size=%d\n", size); |
| #endif |
| write(net_fd, buf, size); |
| } |
| |
| /* return true if the NE2000 can receive more data */ |
| int ne2000_can_receive(NE2000State *s) |
| { |
| int avail, index, boundary; |
| |
| if (s->cmd & E8390_STOP) |
| return 0; |
| index = s->curpag << 8; |
| boundary = s->boundary << 8; |
| if (index < boundary) |
| avail = boundary - index; |
| else |
| avail = (s->stop - s->start) - (index - boundary); |
| if (avail < (MAX_ETH_FRAME_SIZE + 4)) |
| return 0; |
| return 1; |
| } |
| |
| void ne2000_receive(NE2000State *s, uint8_t *buf, int size) |
| { |
| uint8_t *p; |
| int total_len, next, avail, len, index; |
| |
| #if defined(DEBUG_NE2000) |
| printf("NE2000: received len=%d\n", size); |
| #endif |
| |
| index = s->curpag << 8; |
| /* 4 bytes for header */ |
| total_len = size + 4; |
| /* address for next packet (4 bytes for CRC) */ |
| next = index + ((total_len + 4 + 255) & ~0xff); |
| if (next >= s->stop) |
| next -= (s->stop - s->start); |
| /* prepare packet header */ |
| p = s->mem + index; |
| p[0] = ENRSR_RXOK; /* receive status */ |
| p[1] = next >> 8; |
| p[2] = total_len; |
| p[3] = total_len >> 8; |
| index += 4; |
| |
| /* write packet data */ |
| while (size > 0) { |
| avail = s->stop - index; |
| len = size; |
| if (len > avail) |
| len = avail; |
| memcpy(s->mem + index, buf, len); |
| buf += len; |
| index += len; |
| if (index == s->stop) |
| index = s->start; |
| size -= len; |
| } |
| s->curpag = next >> 8; |
| |
| /* now we can signal we have receive something */ |
| s->isr |= ENISR_RX; |
| ne2000_update_irq(s); |
| } |
| |
| void ne2000_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val) |
| { |
| NE2000State *s = &ne2000_state; |
| int offset, page; |
| |
| addr &= 0xf; |
| #ifdef DEBUG_NE2000 |
| printf("NE2000: write addr=0x%x val=0x%02x\n", addr, val); |
| #endif |
| if (addr == E8390_CMD) { |
| /* control register */ |
| s->cmd = val; |
| if (val & E8390_START) { |
| /* test specific case: zero length transfert */ |
| if ((val & (E8390_RREAD | E8390_RWRITE)) && |
| s->rcnt == 0) { |
| s->isr |= ENISR_RDC; |
| ne2000_update_irq(s); |
| } |
| if (val & E8390_TRANS) { |
| net_send_packet(s, s->mem + (s->tpsr << 8), s->tcnt); |
| /* signal end of transfert */ |
| s->tsr = ENTSR_PTX; |
| s->isr |= ENISR_TX; |
| ne2000_update_irq(s); |
| } |
| } |
| } else { |
| page = s->cmd >> 6; |
| offset = addr | (page << 4); |
| switch(offset) { |
| case EN0_STARTPG: |
| s->start = val << 8; |
| break; |
| case EN0_STOPPG: |
| s->stop = val << 8; |
| break; |
| case EN0_BOUNDARY: |
| s->boundary = val; |
| break; |
| case EN0_IMR: |
| s->imr = val; |
| ne2000_update_irq(s); |
| break; |
| case EN0_TPSR: |
| s->tpsr = val; |
| break; |
| case EN0_TCNTLO: |
| s->tcnt = (s->tcnt & 0xff00) | val; |
| break; |
| case EN0_TCNTHI: |
| s->tcnt = (s->tcnt & 0x00ff) | (val << 8); |
| break; |
| case EN0_RSARLO: |
| s->rsar = (s->rsar & 0xff00) | val; |
| break; |
| case EN0_RSARHI: |
| s->rsar = (s->rsar & 0x00ff) | (val << 8); |
| break; |
| case EN0_RCNTLO: |
| s->rcnt = (s->rcnt & 0xff00) | val; |
| break; |
| case EN0_RCNTHI: |
| s->rcnt = (s->rcnt & 0x00ff) | (val << 8); |
| break; |
| case EN0_DCFG: |
| s->dcfg = val; |
| break; |
| case EN0_ISR: |
| s->isr &= ~val; |
| ne2000_update_irq(s); |
| break; |
| case EN1_PHYS ... EN1_PHYS + 5: |
| s->phys[offset - EN1_PHYS] = val; |
| break; |
| case EN1_CURPAG: |
| s->curpag = val; |
| break; |
| case EN1_MULT ... EN1_MULT + 7: |
| s->mult[offset - EN1_MULT] = val; |
| break; |
| } |
| } |
| } |
| |
| uint32_t ne2000_ioport_read(CPUX86State *env, uint32_t addr) |
| { |
| NE2000State *s = &ne2000_state; |
| int offset, page, ret; |
| |
| addr &= 0xf; |
| if (addr == E8390_CMD) { |
| ret = s->cmd; |
| } else { |
| page = s->cmd >> 6; |
| offset = addr | (page << 4); |
| switch(offset) { |
| case EN0_TSR: |
| ret = s->tsr; |
| break; |
| case EN0_BOUNDARY: |
| ret = s->boundary; |
| break; |
| case EN0_ISR: |
| ret = s->isr; |
| break; |
| case EN1_PHYS ... EN1_PHYS + 5: |
| ret = s->phys[offset - EN1_PHYS]; |
| break; |
| case EN1_CURPAG: |
| ret = s->curpag; |
| break; |
| case EN1_MULT ... EN1_MULT + 7: |
| ret = s->mult[offset - EN1_MULT]; |
| break; |
| default: |
| ret = 0x00; |
| break; |
| } |
| } |
| #ifdef DEBUG_NE2000 |
| printf("NE2000: read addr=0x%x val=%02x\n", addr, ret); |
| #endif |
| return ret; |
| } |
| |
| void ne2000_asic_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val) |
| { |
| NE2000State *s = &ne2000_state; |
| uint8_t *p; |
| |
| #ifdef DEBUG_NE2000 |
| printf("NE2000: asic write val=0x%04x\n", val); |
| #endif |
| p = s->mem + s->rsar; |
| if (s->dcfg & 0x01) { |
| /* 16 bit access */ |
| p[0] = val; |
| p[1] = val >> 8; |
| s->rsar += 2; |
| s->rcnt -= 2; |
| } else { |
| /* 8 bit access */ |
| p[0] = val; |
| s->rsar++; |
| s->rcnt--; |
| } |
| /* wrap */ |
| if (s->rsar == s->stop) |
| s->rsar = s->start; |
| if (s->rcnt == 0) { |
| /* signal end of transfert */ |
| s->isr |= ENISR_RDC; |
| ne2000_update_irq(s); |
| } |
| } |
| |
| uint32_t ne2000_asic_ioport_read(CPUX86State *env, uint32_t addr) |
| { |
| NE2000State *s = &ne2000_state; |
| uint8_t *p; |
| int ret; |
| |
| p = s->mem + s->rsar; |
| if (s->dcfg & 0x01) { |
| /* 16 bit access */ |
| ret = p[0] | (p[1] << 8); |
| s->rsar += 2; |
| s->rcnt -= 2; |
| } else { |
| /* 8 bit access */ |
| ret = p[0]; |
| s->rsar++; |
| s->rcnt--; |
| } |
| /* wrap */ |
| if (s->rsar == s->stop) |
| s->rsar = s->start; |
| if (s->rcnt == 0) { |
| /* signal end of transfert */ |
| s->isr |= ENISR_RDC; |
| ne2000_update_irq(s); |
| } |
| #ifdef DEBUG_NE2000 |
| printf("NE2000: asic read val=0x%04x\n", ret); |
| #endif |
| return ret; |
| } |
| |
| void ne2000_reset_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val) |
| { |
| /* nothing to do (end of reset pulse) */ |
| } |
| |
| uint32_t ne2000_reset_ioport_read(CPUX86State *env, uint32_t addr) |
| { |
| ne2000_reset(); |
| return 0; |
| } |
| |
| void ne2000_init(void) |
| { |
| register_ioport_writeb(NE2000_IOPORT, 16, ne2000_ioport_write); |
| register_ioport_readb(NE2000_IOPORT, 16, ne2000_ioport_read); |
| |
| register_ioport_writeb(NE2000_IOPORT + 0x10, 1, ne2000_asic_ioport_write); |
| register_ioport_readb(NE2000_IOPORT + 0x10, 1, ne2000_asic_ioport_read); |
| register_ioport_writew(NE2000_IOPORT + 0x10, 2, ne2000_asic_ioport_write); |
| register_ioport_readw(NE2000_IOPORT + 0x10, 2, ne2000_asic_ioport_read); |
| |
| register_ioport_writeb(NE2000_IOPORT + 0x1f, 1, ne2000_reset_ioport_write); |
| register_ioport_readb(NE2000_IOPORT + 0x1f, 1, ne2000_reset_ioport_read); |
| ne2000_reset(); |
| } |
| |
| /***********************************************************/ |
| /* cpu signal handler */ |
| static void host_segv_handler(int host_signum, siginfo_t *info, |
| void *puc) |
| { |
| if (cpu_signal_handler(host_signum, info, puc)) |
| return; |
| term_exit(); |
| abort(); |
| } |
| |
| static int timer_irq_pending; |
| |
| static void host_alarm_handler(int host_signum, siginfo_t *info, |
| void *puc) |
| { |
| /* just exit from the cpu to have a chance to handle timers */ |
| cpu_x86_interrupt(global_env); |
| timer_irq_pending = 1; |
| } |
| |
| void help(void) |
| { |
| printf("Virtual Linux version " QEMU_VERSION ", Copyright (c) 2003 Fabrice Bellard\n" |
| "usage: vl [-h] bzImage initrd [kernel parameters...]\n" |
| "\n" |
| "'bzImage' is a Linux kernel image (PAGE_OFFSET must be defined\n" |
| "to 0x90000000 in asm/page.h and arch/i386/vmlinux.lds)\n" |
| "'initrd' is an initrd image\n" |
| "-m megs set virtual RAM size to megs MB\n" |
| "-n script set network init script [default=%s]\n" |
| "-d output log in /tmp/vl.log\n" |
| "\n" |
| "During emulation, use C-a h to get terminal commands:\n", |
| DEFAULT_NETWORK_SCRIPT); |
| term_print_help(); |
| exit(1); |
| } |
| |
| int main(int argc, char **argv) |
| { |
| int c, ret, initrd_size, i; |
| struct linux_params *params; |
| struct sigaction act; |
| struct itimerval itv; |
| CPUX86State *env; |
| |
| /* we never want that malloc() uses mmap() */ |
| mallopt(M_MMAP_THRESHOLD, 4096 * 1024); |
| |
| phys_ram_size = 32 * 1024 * 1024; |
| pstrcpy(network_script, sizeof(network_script), DEFAULT_NETWORK_SCRIPT); |
| for(;;) { |
| c = getopt(argc, argv, "hm:dn:"); |
| if (c == -1) |
| break; |
| switch(c) { |
| case 'h': |
| help(); |
| break; |
| case 'm': |
| phys_ram_size = atoi(optarg) * 1024 * 1024; |
| if (phys_ram_size <= 0) |
| help(); |
| break; |
| case 'd': |
| loglevel = 1; |
| break; |
| case 'n': |
| pstrcpy(network_script, sizeof(network_script), optarg); |
| break; |
| } |
| } |
| if (optind + 1 >= argc) |
| help(); |
| |
| /* init debug */ |
| if (loglevel) { |
| logfile = fopen(DEBUG_LOGFILE, "w"); |
| if (!logfile) { |
| perror(DEBUG_LOGFILE); |
| _exit(1); |
| } |
| setvbuf(logfile, NULL, _IOLBF, 0); |
| } |
| |
| /* init network tun interface */ |
| net_init(); |
| |
| /* init the memory */ |
| strcpy(phys_ram_file, "/tmp/vlXXXXXX"); |
| if (mkstemp(phys_ram_file) < 0) { |
| fprintf(stderr, "Could not create temporary memory file\n"); |
| exit(1); |
| } |
| phys_ram_fd = open(phys_ram_file, O_CREAT | O_TRUNC | O_RDWR, 0600); |
| if (phys_ram_fd < 0) { |
| fprintf(stderr, "Could not open temporary memory file\n"); |
| exit(1); |
| } |
| ftruncate(phys_ram_fd, phys_ram_size); |
| unlink(phys_ram_file); |
| phys_ram_base = mmap((void *)PHYS_RAM_BASE, phys_ram_size, |
| PROT_WRITE | PROT_READ, MAP_SHARED | MAP_FIXED, |
| phys_ram_fd, 0); |
| if (phys_ram_base == MAP_FAILED) { |
| fprintf(stderr, "Could not map physical memory\n"); |
| exit(1); |
| } |
| |
| /* now we can load the kernel */ |
| ret = load_kernel(argv[optind], phys_ram_base + KERNEL_LOAD_ADDR); |
| if (ret < 0) { |
| fprintf(stderr, "%s: could not load kernel\n", argv[optind]); |
| exit(1); |
| } |
| |
| /* load initrd */ |
| initrd_size = load_image(argv[optind + 1], phys_ram_base + INITRD_LOAD_ADDR); |
| if (initrd_size < 0) { |
| fprintf(stderr, "%s: could not load initrd\n", argv[optind + 1]); |
| exit(1); |
| } |
| |
| /* init kernel params */ |
| params = (void *)(phys_ram_base + KERNEL_PARAMS_ADDR); |
| memset(params, 0, sizeof(struct linux_params)); |
| params->mount_root_rdonly = 0; |
| params->cl_magic = 0xA33F; |
| params->cl_offset = params->commandline - (uint8_t *)params; |
| params->ext_mem_k = (phys_ram_size / 1024) - 1024; |
| for(i = optind + 2; i < argc; i++) { |
| if (i != optind + 2) |
| pstrcat(params->commandline, sizeof(params->commandline), " "); |
| pstrcat(params->commandline, sizeof(params->commandline), argv[i]); |
| } |
| params->loader_type = 0x01; |
| if (initrd_size > 0) { |
| params->initrd_start = INITRD_LOAD_ADDR; |
| params->initrd_size = initrd_size; |
| } |
| params->orig_video_lines = 25; |
| params->orig_video_cols = 80; |
| |
| /* init basic PC hardware */ |
| init_ioports(); |
| register_ioport_writeb(0x80, 1, ioport80_write); |
| |
| register_ioport_writeb(0x3d4, 2, vga_ioport_write); |
| |
| cmos_init(); |
| pic_init(); |
| pit_init(); |
| serial_init(); |
| ne2000_init(); |
| |
| /* setup cpu signal handlers for MMU / self modifying code handling */ |
| sigfillset(&act.sa_mask); |
| act.sa_flags = SA_SIGINFO; |
| act.sa_sigaction = host_segv_handler; |
| sigaction(SIGSEGV, &act, NULL); |
| sigaction(SIGBUS, &act, NULL); |
| |
| act.sa_sigaction = host_alarm_handler; |
| sigaction(SIGALRM, &act, NULL); |
| |
| /* init CPU state */ |
| env = cpu_init(); |
| global_env = env; |
| cpu_single_env = env; |
| |
| /* setup basic memory access */ |
| env->cr[0] = 0x00000033; |
| cpu_x86_init_mmu(env); |
| |
| memset(params->idt_table, 0, sizeof(params->idt_table)); |
| |
| params->gdt_table[2] = 0x00cf9a000000ffffLL; /* KERNEL_CS */ |
| params->gdt_table[3] = 0x00cf92000000ffffLL; /* KERNEL_DS */ |
| |
| env->idt.base = (void *)params->idt_table; |
| env->idt.limit = sizeof(params->idt_table) - 1; |
| env->gdt.base = (void *)params->gdt_table; |
| env->gdt.limit = sizeof(params->gdt_table) - 1; |
| |
| cpu_x86_load_seg(env, R_CS, KERNEL_CS); |
| cpu_x86_load_seg(env, R_DS, KERNEL_DS); |
| cpu_x86_load_seg(env, R_ES, KERNEL_DS); |
| cpu_x86_load_seg(env, R_SS, KERNEL_DS); |
| cpu_x86_load_seg(env, R_FS, KERNEL_DS); |
| cpu_x86_load_seg(env, R_GS, KERNEL_DS); |
| |
| env->eip = KERNEL_LOAD_ADDR; |
| env->regs[R_ESI] = KERNEL_PARAMS_ADDR; |
| env->eflags = 0x2; |
| |
| itv.it_interval.tv_sec = 0; |
| itv.it_interval.tv_usec = 10 * 1000; |
| itv.it_value.tv_sec = 0; |
| itv.it_value.tv_usec = 10 * 1000; |
| setitimer(ITIMER_REAL, &itv, NULL); |
| |
| for(;;) { |
| struct pollfd ufds[2], *pf, *serial_ufd, *net_ufd; |
| int ret, n, timeout; |
| uint8_t ch; |
| |
| ret = cpu_x86_exec(env); |
| |
| /* if hlt instruction, we wait until the next IRQ */ |
| if (ret == EXCP_HLT) |
| timeout = 10; |
| else |
| timeout = 0; |
| /* poll any events */ |
| serial_ufd = NULL; |
| net_ufd = NULL; |
| pf = ufds; |
| if (!(serial_ports[0].lsr & UART_LSR_DR)) { |
| serial_ufd = pf; |
| pf->fd = 0; |
| pf->events = POLLIN; |
| pf++; |
| } |
| if (net_fd > 0 && ne2000_can_receive(&ne2000_state)) { |
| net_ufd = pf; |
| pf->fd = net_fd; |
| pf->events = POLLIN; |
| pf++; |
| } |
| ret = poll(ufds, pf - ufds, timeout); |
| if (ret > 0) { |
| if (serial_ufd && (serial_ufd->revents & POLLIN)) { |
| n = read(0, &ch, 1); |
| if (n == 1) { |
| serial_received_byte(&serial_ports[0], ch); |
| } |
| } |
| if (net_ufd && (net_ufd->revents & POLLIN)) { |
| uint8_t buf[MAX_ETH_FRAME_SIZE]; |
| |
| n = read(net_fd, buf, MAX_ETH_FRAME_SIZE); |
| if (n > 0) { |
| if (n < 60) { |
| memset(buf + n, 0, 60 - n); |
| n = 60; |
| } |
| ne2000_receive(&ne2000_state, buf, n); |
| } |
| } |
| } |
| |
| /* timer IRQ */ |
| if (timer_irq_pending) { |
| pic_set_irq(0, 1); |
| pic_set_irq(0, 0); |
| timer_irq_pending = 0; |
| } |
| |
| pic_handle_irq(); |
| } |
| |
| return 0; |
| } |