| /* |
| * virtio-scmi nodes for testing |
| * |
| * SPDX-FileCopyrightText: Linaro Ltd |
| * SPDX-FileCopyrightText: Red Hat, Inc. |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| * |
| * Based on virtio-gpio.c, doing basically the same thing. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "standard-headers/linux/virtio_config.h" |
| #include "../libqtest.h" |
| #include "qemu/module.h" |
| #include "qgraph.h" |
| #include "virtio-scmi.h" |
| |
| static QGuestAllocator *alloc; |
| |
| static void virtio_scmi_cleanup(QVhostUserSCMI *scmi) |
| { |
| QVirtioDevice *vdev = scmi->vdev; |
| int i; |
| |
| for (i = 0; i < 2; i++) { |
| qvirtqueue_cleanup(vdev->bus, scmi->queues[i], alloc); |
| } |
| g_free(scmi->queues); |
| } |
| |
| /* |
| * This handles the VirtIO setup from the point of view of the driver |
| * frontend and therefore doesn't present any vhost specific features |
| * and in fact masks of the re-used bit. |
| */ |
| static void virtio_scmi_setup(QVhostUserSCMI *scmi) |
| { |
| QVirtioDevice *vdev = scmi->vdev; |
| uint64_t features; |
| int i; |
| |
| features = qvirtio_get_features(vdev); |
| features &= ~QVIRTIO_F_BAD_FEATURE; |
| qvirtio_set_features(vdev, features); |
| |
| scmi->queues = g_new(QVirtQueue *, 2); |
| for (i = 0; i < 2; i++) { |
| scmi->queues[i] = qvirtqueue_setup(vdev, alloc, i); |
| } |
| qvirtio_set_driver_ok(vdev); |
| } |
| |
| static void *qvirtio_scmi_get_driver(QVhostUserSCMI *v_scmi, |
| const char *interface) |
| { |
| if (!g_strcmp0(interface, "vhost-user-scmi")) { |
| return v_scmi; |
| } |
| if (!g_strcmp0(interface, "virtio")) { |
| return v_scmi->vdev; |
| } |
| |
| g_assert_not_reached(); |
| } |
| |
| static void *qvirtio_scmi_device_get_driver(void *object, |
| const char *interface) |
| { |
| QVhostUserSCMIDevice *v_scmi = object; |
| return qvirtio_scmi_get_driver(&v_scmi->scmi, interface); |
| } |
| |
| /* virtio-scmi (mmio) */ |
| static void qvirtio_scmi_device_destructor(QOSGraphObject *obj) |
| { |
| QVhostUserSCMIDevice *scmi_dev = (QVhostUserSCMIDevice *) obj; |
| virtio_scmi_cleanup(&scmi_dev->scmi); |
| } |
| |
| static void qvirtio_scmi_device_start_hw(QOSGraphObject *obj) |
| { |
| QVhostUserSCMIDevice *scmi_dev = (QVhostUserSCMIDevice *) obj; |
| virtio_scmi_setup(&scmi_dev->scmi); |
| } |
| |
| static void *virtio_scmi_device_create(void *virtio_dev, |
| QGuestAllocator *t_alloc, |
| void *addr) |
| { |
| QVhostUserSCMIDevice *virtio_device = g_new0(QVhostUserSCMIDevice, 1); |
| QVhostUserSCMI *interface = &virtio_device->scmi; |
| |
| interface->vdev = virtio_dev; |
| alloc = t_alloc; |
| |
| virtio_device->obj.get_driver = qvirtio_scmi_device_get_driver; |
| virtio_device->obj.start_hw = qvirtio_scmi_device_start_hw; |
| virtio_device->obj.destructor = qvirtio_scmi_device_destructor; |
| |
| return &virtio_device->obj; |
| } |
| |
| /* virtio-scmi-pci */ |
| static void qvirtio_scmi_pci_destructor(QOSGraphObject *obj) |
| { |
| QVhostUserSCMIPCI *scmi_pci = (QVhostUserSCMIPCI *) obj; |
| QOSGraphObject *pci_vobj = &scmi_pci->pci_vdev.obj; |
| |
| virtio_scmi_cleanup(&scmi_pci->scmi); |
| qvirtio_pci_destructor(pci_vobj); |
| } |
| |
| static void qvirtio_scmi_pci_start_hw(QOSGraphObject *obj) |
| { |
| QVhostUserSCMIPCI *scmi_pci = (QVhostUserSCMIPCI *) obj; |
| QOSGraphObject *pci_vobj = &scmi_pci->pci_vdev.obj; |
| |
| qvirtio_pci_start_hw(pci_vobj); |
| virtio_scmi_setup(&scmi_pci->scmi); |
| } |
| |
| static void *qvirtio_scmi_pci_get_driver(void *object, const char *interface) |
| { |
| QVhostUserSCMIPCI *v_scmi = object; |
| |
| if (!g_strcmp0(interface, "pci-device")) { |
| return v_scmi->pci_vdev.pdev; |
| } |
| return qvirtio_scmi_get_driver(&v_scmi->scmi, interface); |
| } |
| |
| static void *virtio_scmi_pci_create(void *pci_bus, QGuestAllocator *t_alloc, |
| void *addr) |
| { |
| QVhostUserSCMIPCI *virtio_spci = g_new0(QVhostUserSCMIPCI, 1); |
| QVhostUserSCMI *interface = &virtio_spci->scmi; |
| QOSGraphObject *obj = &virtio_spci->pci_vdev.obj; |
| |
| virtio_pci_init(&virtio_spci->pci_vdev, pci_bus, addr); |
| interface->vdev = &virtio_spci->pci_vdev.vdev; |
| alloc = t_alloc; |
| |
| obj->get_driver = qvirtio_scmi_pci_get_driver; |
| obj->start_hw = qvirtio_scmi_pci_start_hw; |
| obj->destructor = qvirtio_scmi_pci_destructor; |
| |
| return obj; |
| } |
| |
| static void virtio_scmi_register_nodes(void) |
| { |
| QPCIAddress addr = { |
| .devfn = QPCI_DEVFN(4, 0), |
| }; |
| |
| QOSGraphEdgeOptions edge_opts = { }; |
| |
| /* vhost-user-scmi-device */ |
| edge_opts.extra_device_opts = "id=scmi,chardev=chr-vhost-user-test " |
| "-global virtio-mmio.force-legacy=false"; |
| qos_node_create_driver("vhost-user-scmi-device", |
| virtio_scmi_device_create); |
| qos_node_consumes("vhost-user-scmi-device", "virtio-bus", &edge_opts); |
| qos_node_produces("vhost-user-scmi-device", "vhost-user-scmi"); |
| |
| /* virtio-scmi-pci */ |
| edge_opts.extra_device_opts = "id=scmi,addr=04.0,chardev=chr-vhost-user-test"; |
| add_qpci_address(&edge_opts, &addr); |
| qos_node_create_driver("vhost-user-scmi-pci", virtio_scmi_pci_create); |
| qos_node_consumes("vhost-user-scmi-pci", "pci-bus", &edge_opts); |
| qos_node_produces("vhost-user-scmi-pci", "vhost-user-scmi"); |
| } |
| |
| libqos_init(virtio_scmi_register_nodes); |