| /* |
| * Texas Instruments TMP105 temperature sensor. |
| * |
| * Copyright (C) 2008 Nokia Corporation |
| * Written by Andrzej Zaborowski <andrew@openedhand.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 or |
| * (at your option) version 3 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "hw/hw.h" |
| #include "hw/i2c.h" |
| #include "hw/tmp105.h" |
| #include "qapi/visitor.h" |
| |
| static void tmp105_interrupt_update(TMP105State *s) |
| { |
| qemu_set_irq(s->pin, s->alarm ^ ((~s->config >> 2) & 1)); /* POL */ |
| } |
| |
| static void tmp105_alarm_update(TMP105State *s) |
| { |
| if ((s->config >> 0) & 1) { /* SD */ |
| if ((s->config >> 7) & 1) /* OS */ |
| s->config &= ~(1 << 7); /* OS */ |
| else |
| return; |
| } |
| |
| if ((s->config >> 1) & 1) { /* TM */ |
| if (s->temperature >= s->limit[1]) |
| s->alarm = 1; |
| else if (s->temperature < s->limit[0]) |
| s->alarm = 1; |
| } else { |
| if (s->temperature >= s->limit[1]) |
| s->alarm = 1; |
| else if (s->temperature < s->limit[0]) |
| s->alarm = 0; |
| } |
| |
| tmp105_interrupt_update(s); |
| } |
| |
| static void tmp105_get_temperature(Object *obj, Visitor *v, void *opaque, |
| const char *name, Error **errp) |
| { |
| TMP105State *s = TMP105(obj); |
| int64_t value = s->temperature; |
| |
| visit_type_int(v, &value, name, errp); |
| } |
| |
| /* Units are 0.001 centigrades relative to 0 C. */ |
| static void tmp105_set_temperature(Object *obj, Visitor *v, void *opaque, |
| const char *name, Error **errp) |
| { |
| TMP105State *s = TMP105(obj); |
| int64_t temp; |
| |
| visit_type_int(v, &temp, name, errp); |
| if (error_is_set(errp)) { |
| return; |
| } |
| if (temp >= 128000 || temp < -128000) { |
| error_setg(errp, "value %" PRId64 ".%03" PRIu64 " °C is out of range", |
| temp / 1000, temp % 1000); |
| return; |
| } |
| |
| s->temperature = ((int16_t) (temp * 0x800 / 128000)) << 4; |
| |
| tmp105_alarm_update(s); |
| } |
| |
| static const int tmp105_faultq[4] = { 1, 2, 4, 6 }; |
| |
| static void tmp105_read(TMP105State *s) |
| { |
| s->len = 0; |
| |
| if ((s->config >> 1) & 1) { /* TM */ |
| s->alarm = 0; |
| tmp105_interrupt_update(s); |
| } |
| |
| switch (s->pointer & 3) { |
| case TMP105_REG_TEMPERATURE: |
| s->buf[s->len ++] = (((uint16_t) s->temperature) >> 8); |
| s->buf[s->len ++] = (((uint16_t) s->temperature) >> 0) & |
| (0xf0 << ((~s->config >> 5) & 3)); /* R */ |
| break; |
| |
| case TMP105_REG_CONFIG: |
| s->buf[s->len ++] = s->config; |
| break; |
| |
| case TMP105_REG_T_LOW: |
| s->buf[s->len ++] = ((uint16_t) s->limit[0]) >> 8; |
| s->buf[s->len ++] = ((uint16_t) s->limit[0]) >> 0; |
| break; |
| |
| case TMP105_REG_T_HIGH: |
| s->buf[s->len ++] = ((uint16_t) s->limit[1]) >> 8; |
| s->buf[s->len ++] = ((uint16_t) s->limit[1]) >> 0; |
| break; |
| } |
| } |
| |
| static void tmp105_write(TMP105State *s) |
| { |
| switch (s->pointer & 3) { |
| case TMP105_REG_TEMPERATURE: |
| break; |
| |
| case TMP105_REG_CONFIG: |
| if (s->buf[0] & ~s->config & (1 << 0)) /* SD */ |
| printf("%s: TMP105 shutdown\n", __FUNCTION__); |
| s->config = s->buf[0]; |
| s->faults = tmp105_faultq[(s->config >> 3) & 3]; /* F */ |
| tmp105_alarm_update(s); |
| break; |
| |
| case TMP105_REG_T_LOW: |
| case TMP105_REG_T_HIGH: |
| if (s->len >= 3) |
| s->limit[s->pointer & 1] = (int16_t) |
| ((((uint16_t) s->buf[0]) << 8) | s->buf[1]); |
| tmp105_alarm_update(s); |
| break; |
| } |
| } |
| |
| static int tmp105_rx(I2CSlave *i2c) |
| { |
| TMP105State *s = TMP105(i2c); |
| |
| if (s->len < 2) { |
| return s->buf[s->len ++]; |
| } else { |
| return 0xff; |
| } |
| } |
| |
| static int tmp105_tx(I2CSlave *i2c, uint8_t data) |
| { |
| TMP105State *s = TMP105(i2c); |
| |
| if (s->len == 0) { |
| s->pointer = data; |
| s->len++; |
| } else { |
| if (s->len <= 2) { |
| s->buf[s->len - 1] = data; |
| } |
| s->len++; |
| tmp105_write(s); |
| } |
| |
| return 0; |
| } |
| |
| static void tmp105_event(I2CSlave *i2c, enum i2c_event event) |
| { |
| TMP105State *s = TMP105(i2c); |
| |
| if (event == I2C_START_RECV) { |
| tmp105_read(s); |
| } |
| |
| s->len = 0; |
| } |
| |
| static int tmp105_post_load(void *opaque, int version_id) |
| { |
| TMP105State *s = opaque; |
| |
| s->faults = tmp105_faultq[(s->config >> 3) & 3]; /* F */ |
| |
| tmp105_interrupt_update(s); |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_tmp105 = { |
| .name = "TMP105", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .minimum_version_id_old = 0, |
| .post_load = tmp105_post_load, |
| .fields = (VMStateField []) { |
| VMSTATE_UINT8(len, TMP105State), |
| VMSTATE_UINT8_ARRAY(buf, TMP105State, 2), |
| VMSTATE_UINT8(pointer, TMP105State), |
| VMSTATE_UINT8(config, TMP105State), |
| VMSTATE_INT16(temperature, TMP105State), |
| VMSTATE_INT16_ARRAY(limit, TMP105State, 2), |
| VMSTATE_UINT8(alarm, TMP105State), |
| VMSTATE_I2C_SLAVE(i2c, TMP105State), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void tmp105_reset(I2CSlave *i2c) |
| { |
| TMP105State *s = TMP105(i2c); |
| |
| s->temperature = 0; |
| s->pointer = 0; |
| s->config = 0; |
| s->faults = tmp105_faultq[(s->config >> 3) & 3]; |
| s->alarm = 0; |
| |
| tmp105_interrupt_update(s); |
| } |
| |
| static int tmp105_init(I2CSlave *i2c) |
| { |
| TMP105State *s = TMP105(i2c); |
| |
| qdev_init_gpio_out(&i2c->qdev, &s->pin, 1); |
| |
| tmp105_reset(&s->i2c); |
| |
| return 0; |
| } |
| |
| static void tmp105_initfn(Object *obj) |
| { |
| object_property_add(obj, "temperature", "int", |
| tmp105_get_temperature, |
| tmp105_set_temperature, NULL, NULL, NULL); |
| } |
| |
| static void tmp105_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); |
| |
| k->init = tmp105_init; |
| k->event = tmp105_event; |
| k->recv = tmp105_rx; |
| k->send = tmp105_tx; |
| dc->vmsd = &vmstate_tmp105; |
| } |
| |
| static const TypeInfo tmp105_info = { |
| .name = TYPE_TMP105, |
| .parent = TYPE_I2C_SLAVE, |
| .instance_size = sizeof(TMP105State), |
| .instance_init = tmp105_initfn, |
| .class_init = tmp105_class_init, |
| }; |
| |
| static void tmp105_register_types(void) |
| { |
| type_register_static(&tmp105_info); |
| } |
| |
| type_init(tmp105_register_types) |