| /* | 
 |  * MAXIM DS1338 I2C RTC+NVRAM | 
 |  * | 
 |  * Copyright (c) 2009 CodeSourcery. | 
 |  * Written by Paul Brook | 
 |  * | 
 |  * This code is licensed under the GNU GPL v2. | 
 |  * | 
 |  * Contributions after 2012-01-13 are licensed under the terms of the | 
 |  * GNU GPL, version 2 or (at your option) any later version. | 
 |  */ | 
 |  | 
 | #include "qemu/osdep.h" | 
 | #include "hw/i2c/i2c.h" | 
 | #include "migration/vmstate.h" | 
 | #include "qemu/bcd.h" | 
 | #include "qemu/module.h" | 
 | #include "qom/object.h" | 
 | #include "sysemu/rtc.h" | 
 |  | 
 | /* Size of NVRAM including both the user-accessible area and the | 
 |  * secondary register area. | 
 |  */ | 
 | #define NVRAM_SIZE 64 | 
 |  | 
 | /* Flags definitions */ | 
 | #define SECONDS_CH 0x80 | 
 | #define HOURS_12   0x40 | 
 | #define HOURS_PM   0x20 | 
 | #define CTRL_OSF   0x20 | 
 |  | 
 | #define TYPE_DS1338 "ds1338" | 
 | OBJECT_DECLARE_SIMPLE_TYPE(DS1338State, DS1338) | 
 |  | 
 | struct DS1338State { | 
 |     I2CSlave parent_obj; | 
 |  | 
 |     int64_t offset; | 
 |     uint8_t wday_offset; | 
 |     uint8_t nvram[NVRAM_SIZE]; | 
 |     int32_t ptr; | 
 |     bool addr_byte; | 
 | }; | 
 |  | 
 | static const VMStateDescription vmstate_ds1338 = { | 
 |     .name = "ds1338", | 
 |     .version_id = 2, | 
 |     .minimum_version_id = 1, | 
 |     .fields = (VMStateField[]) { | 
 |         VMSTATE_I2C_SLAVE(parent_obj, DS1338State), | 
 |         VMSTATE_INT64(offset, DS1338State), | 
 |         VMSTATE_UINT8_V(wday_offset, DS1338State, 2), | 
 |         VMSTATE_UINT8_ARRAY(nvram, DS1338State, NVRAM_SIZE), | 
 |         VMSTATE_INT32(ptr, DS1338State), | 
 |         VMSTATE_BOOL(addr_byte, DS1338State), | 
 |         VMSTATE_END_OF_LIST() | 
 |     } | 
 | }; | 
 |  | 
 | static void capture_current_time(DS1338State *s) | 
 | { | 
 |     /* Capture the current time into the secondary registers | 
 |      * which will be actually read by the data transfer operation. | 
 |      */ | 
 |     struct tm now; | 
 |     qemu_get_timedate(&now, s->offset); | 
 |     s->nvram[0] = to_bcd(now.tm_sec); | 
 |     s->nvram[1] = to_bcd(now.tm_min); | 
 |     if (s->nvram[2] & HOURS_12) { | 
 |         int tmp = now.tm_hour; | 
 |         if (tmp % 12 == 0) { | 
 |             tmp += 12; | 
 |         } | 
 |         if (tmp <= 12) { | 
 |             s->nvram[2] = HOURS_12 | to_bcd(tmp); | 
 |         } else { | 
 |             s->nvram[2] = HOURS_12 | HOURS_PM | to_bcd(tmp - 12); | 
 |         } | 
 |     } else { | 
 |         s->nvram[2] = to_bcd(now.tm_hour); | 
 |     } | 
 |     s->nvram[3] = (now.tm_wday + s->wday_offset) % 7 + 1; | 
 |     s->nvram[4] = to_bcd(now.tm_mday); | 
 |     s->nvram[5] = to_bcd(now.tm_mon + 1); | 
 |     s->nvram[6] = to_bcd(now.tm_year - 100); | 
 | } | 
 |  | 
 | static void inc_regptr(DS1338State *s) | 
 | { | 
 |     /* The register pointer wraps around after 0x3F; wraparound | 
 |      * causes the current time/date to be retransferred into | 
 |      * the secondary registers. | 
 |      */ | 
 |     s->ptr = (s->ptr + 1) & (NVRAM_SIZE - 1); | 
 |     if (!s->ptr) { | 
 |         capture_current_time(s); | 
 |     } | 
 | } | 
 |  | 
 | static int ds1338_event(I2CSlave *i2c, enum i2c_event event) | 
 | { | 
 |     DS1338State *s = DS1338(i2c); | 
 |  | 
 |     switch (event) { | 
 |     case I2C_START_RECV: | 
 |         /* In h/w, capture happens on any START condition, not just a | 
 |          * START_RECV, but there is no need to actually capture on | 
 |          * START_SEND, because the guest can't get at that data | 
 |          * without going through a START_RECV which would overwrite it. | 
 |          */ | 
 |         capture_current_time(s); | 
 |         break; | 
 |     case I2C_START_SEND: | 
 |         s->addr_byte = true; | 
 |         break; | 
 |     default: | 
 |         break; | 
 |     } | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | static uint8_t ds1338_recv(I2CSlave *i2c) | 
 | { | 
 |     DS1338State *s = DS1338(i2c); | 
 |     uint8_t res; | 
 |  | 
 |     res  = s->nvram[s->ptr]; | 
 |     inc_regptr(s); | 
 |     return res; | 
 | } | 
 |  | 
 | static int ds1338_send(I2CSlave *i2c, uint8_t data) | 
 | { | 
 |     DS1338State *s = DS1338(i2c); | 
 |  | 
 |     if (s->addr_byte) { | 
 |         s->ptr = data & (NVRAM_SIZE - 1); | 
 |         s->addr_byte = false; | 
 |         return 0; | 
 |     } | 
 |     if (s->ptr < 7) { | 
 |         /* Time register. */ | 
 |         struct tm now; | 
 |         qemu_get_timedate(&now, s->offset); | 
 |         switch(s->ptr) { | 
 |         case 0: | 
 |             /* TODO: Implement CH (stop) bit.  */ | 
 |             now.tm_sec = from_bcd(data & 0x7f); | 
 |             break; | 
 |         case 1: | 
 |             now.tm_min = from_bcd(data & 0x7f); | 
 |             break; | 
 |         case 2: | 
 |             if (data & HOURS_12) { | 
 |                 int tmp = from_bcd(data & (HOURS_PM - 1)); | 
 |                 if (data & HOURS_PM) { | 
 |                     tmp += 12; | 
 |                 } | 
 |                 if (tmp % 12 == 0) { | 
 |                     tmp -= 12; | 
 |                 } | 
 |                 now.tm_hour = tmp; | 
 |             } else { | 
 |                 now.tm_hour = from_bcd(data & (HOURS_12 - 1)); | 
 |             } | 
 |             break; | 
 |         case 3: | 
 |             { | 
 |                 /* The day field is supposed to contain a value in | 
 |                    the range 1-7. Otherwise behavior is undefined. | 
 |                  */ | 
 |                 int user_wday = (data & 7) - 1; | 
 |                 s->wday_offset = (user_wday - now.tm_wday + 7) % 7; | 
 |             } | 
 |             break; | 
 |         case 4: | 
 |             now.tm_mday = from_bcd(data & 0x3f); | 
 |             break; | 
 |         case 5: | 
 |             now.tm_mon = from_bcd(data & 0x1f) - 1; | 
 |             break; | 
 |         case 6: | 
 |             now.tm_year = from_bcd(data) + 100; | 
 |             break; | 
 |         } | 
 |         s->offset = qemu_timedate_diff(&now); | 
 |     } else if (s->ptr == 7) { | 
 |         /* Control register. */ | 
 |  | 
 |         /* Ensure bits 2, 3 and 6 will read back as zero. */ | 
 |         data &= 0xB3; | 
 |  | 
 |         /* Attempting to write the OSF flag to logic 1 leaves the | 
 |            value unchanged. */ | 
 |         data = (data & ~CTRL_OSF) | (data & s->nvram[s->ptr] & CTRL_OSF); | 
 |  | 
 |         s->nvram[s->ptr] = data; | 
 |     } else { | 
 |         s->nvram[s->ptr] = data; | 
 |     } | 
 |     inc_regptr(s); | 
 |     return 0; | 
 | } | 
 |  | 
 | static void ds1338_reset(DeviceState *dev) | 
 | { | 
 |     DS1338State *s = DS1338(dev); | 
 |  | 
 |     /* The clock is running and synchronized with the host */ | 
 |     s->offset = 0; | 
 |     s->wday_offset = 0; | 
 |     memset(s->nvram, 0, NVRAM_SIZE); | 
 |     s->ptr = 0; | 
 |     s->addr_byte = false; | 
 | } | 
 |  | 
 | static void ds1338_class_init(ObjectClass *klass, void *data) | 
 | { | 
 |     DeviceClass *dc = DEVICE_CLASS(klass); | 
 |     I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); | 
 |  | 
 |     k->event = ds1338_event; | 
 |     k->recv = ds1338_recv; | 
 |     k->send = ds1338_send; | 
 |     dc->reset = ds1338_reset; | 
 |     dc->vmsd = &vmstate_ds1338; | 
 | } | 
 |  | 
 | static const TypeInfo ds1338_info = { | 
 |     .name          = TYPE_DS1338, | 
 |     .parent        = TYPE_I2C_SLAVE, | 
 |     .instance_size = sizeof(DS1338State), | 
 |     .class_init    = ds1338_class_init, | 
 | }; | 
 |  | 
 | static void ds1338_register_types(void) | 
 | { | 
 |     type_register_static(&ds1338_info); | 
 | } | 
 |  | 
 | type_init(ds1338_register_types) |