| /* |
| * CXL Utility library for mailbox interface |
| * |
| * Copyright(C) 2020 Intel Corporation. |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. See the |
| * COPYING file in the top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/pci/msi.h" |
| #include "hw/pci/msix.h" |
| #include "hw/cxl/cxl.h" |
| #include "hw/cxl/cxl_events.h" |
| #include "hw/cxl/cxl_mailbox.h" |
| #include "hw/pci/pci.h" |
| #include "hw/pci-bridge/cxl_upstream_port.h" |
| #include "qemu/cutils.h" |
| #include "qemu/log.h" |
| #include "qemu/units.h" |
| #include "qemu/uuid.h" |
| #include "sysemu/hostmem.h" |
| #include "qemu/range.h" |
| |
| #define CXL_CAPACITY_MULTIPLIER (256 * MiB) |
| #define CXL_DC_EVENT_LOG_SIZE 8 |
| #define CXL_NUM_EXTENTS_SUPPORTED 512 |
| #define CXL_NUM_TAGS_SUPPORTED 0 |
| |
| /* |
| * How to add a new command, example. The command set FOO, with cmd BAR. |
| * 1. Add the command set and cmd to the enum. |
| * FOO = 0x7f, |
| * #define BAR 0 |
| * 2. Implement the handler |
| * static CXLRetCode cmd_foo_bar(struct cxl_cmd *cmd, |
| * CXLDeviceState *cxl_dstate, uint16_t *len) |
| * 3. Add the command to the cxl_cmd_set[][] |
| * [FOO][BAR] = { "FOO_BAR", cmd_foo_bar, x, y }, |
| * 4. Implement your handler |
| * define_mailbox_handler(FOO_BAR) { ... return CXL_MBOX_SUCCESS; } |
| * |
| * |
| * Writing the handler: |
| * The handler will provide the &struct cxl_cmd, the &CXLDeviceState, and the |
| * in/out length of the payload. The handler is responsible for consuming the |
| * payload from cmd->payload and operating upon it as necessary. It must then |
| * fill the output data into cmd->payload (overwriting what was there), |
| * setting the length, and returning a valid return code. |
| * |
| * XXX: The handler need not worry about endianness. The payload is read out of |
| * a register interface that already deals with it. |
| */ |
| |
| enum { |
| INFOSTAT = 0x00, |
| #define IS_IDENTIFY 0x1 |
| #define BACKGROUND_OPERATION_STATUS 0x2 |
| EVENTS = 0x01, |
| #define GET_RECORDS 0x0 |
| #define CLEAR_RECORDS 0x1 |
| #define GET_INTERRUPT_POLICY 0x2 |
| #define SET_INTERRUPT_POLICY 0x3 |
| FIRMWARE_UPDATE = 0x02, |
| #define GET_INFO 0x0 |
| #define TRANSFER 0x1 |
| #define ACTIVATE 0x2 |
| TIMESTAMP = 0x03, |
| #define GET 0x0 |
| #define SET 0x1 |
| LOGS = 0x04, |
| #define GET_SUPPORTED 0x0 |
| #define GET_LOG 0x1 |
| FEATURES = 0x05, |
| #define GET_SUPPORTED 0x0 |
| #define GET_FEATURE 0x1 |
| #define SET_FEATURE 0x2 |
| IDENTIFY = 0x40, |
| #define MEMORY_DEVICE 0x0 |
| CCLS = 0x41, |
| #define GET_PARTITION_INFO 0x0 |
| #define GET_LSA 0x2 |
| #define SET_LSA 0x3 |
| SANITIZE = 0x44, |
| #define OVERWRITE 0x0 |
| #define SECURE_ERASE 0x1 |
| PERSISTENT_MEM = 0x45, |
| #define GET_SECURITY_STATE 0x0 |
| MEDIA_AND_POISON = 0x43, |
| #define GET_POISON_LIST 0x0 |
| #define INJECT_POISON 0x1 |
| #define CLEAR_POISON 0x2 |
| #define GET_SCAN_MEDIA_CAPABILITIES 0x3 |
| #define SCAN_MEDIA 0x4 |
| #define GET_SCAN_MEDIA_RESULTS 0x5 |
| DCD_CONFIG = 0x48, |
| #define GET_DC_CONFIG 0x0 |
| #define GET_DYN_CAP_EXT_LIST 0x1 |
| #define ADD_DYN_CAP_RSP 0x2 |
| #define RELEASE_DYN_CAP 0x3 |
| PHYSICAL_SWITCH = 0x51, |
| #define IDENTIFY_SWITCH_DEVICE 0x0 |
| #define GET_PHYSICAL_PORT_STATE 0x1 |
| TUNNEL = 0x53, |
| #define MANAGEMENT_COMMAND 0x0 |
| }; |
| |
| /* CCI Message Format CXL r3.1 Figure 7-19 */ |
| typedef struct CXLCCIMessage { |
| uint8_t category; |
| #define CXL_CCI_CAT_REQ 0 |
| #define CXL_CCI_CAT_RSP 1 |
| uint8_t tag; |
| uint8_t resv1; |
| uint8_t command; |
| uint8_t command_set; |
| uint8_t pl_length[3]; |
| uint16_t rc; |
| uint16_t vendor_specific; |
| uint8_t payload[]; |
| } QEMU_PACKED CXLCCIMessage; |
| |
| /* This command is only defined to an MLD FM Owned LD or an MHD */ |
| static CXLRetCode cmd_tunnel_management_cmd(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| PCIDevice *tunnel_target; |
| CXLCCI *target_cci; |
| struct { |
| uint8_t port_or_ld_id; |
| uint8_t target_type; |
| uint16_t size; |
| CXLCCIMessage ccimessage; |
| } QEMU_PACKED *in; |
| struct { |
| uint16_t resp_len; |
| uint8_t resv[2]; |
| CXLCCIMessage ccimessage; |
| } QEMU_PACKED *out; |
| size_t pl_length, length_out; |
| bool bg_started; |
| int rc; |
| |
| if (cmd->in < sizeof(*in)) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| in = (void *)payload_in; |
| out = (void *)payload_out; |
| |
| /* Enough room for minimum sized message - no payload */ |
| if (in->size < sizeof(in->ccimessage)) { |
| return CXL_MBOX_INVALID_PAYLOAD_LENGTH; |
| } |
| /* Length of input payload should be in->size + a wrapping tunnel header */ |
| if (in->size != len_in - offsetof(typeof(*out), ccimessage)) { |
| return CXL_MBOX_INVALID_PAYLOAD_LENGTH; |
| } |
| if (in->ccimessage.category != CXL_CCI_CAT_REQ) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| if (in->target_type != 0) { |
| qemu_log_mask(LOG_UNIMP, |
| "Tunneled Command sent to non existent FM-LD"); |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| /* |
| * Target of a tunnel unfortunately depends on type of CCI readint |
| * the message. |
| * If in a switch, then it's the port number. |
| * If in an MLD it is the ld number. |
| * If in an MHD target type indicate where we are going. |
| */ |
| if (object_dynamic_cast(OBJECT(cci->d), TYPE_CXL_TYPE3)) { |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| if (in->port_or_ld_id != 0) { |
| /* Only pretending to have one for now! */ |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| target_cci = &ct3d->ld0_cci; |
| } else if (object_dynamic_cast(OBJECT(cci->d), TYPE_CXL_USP)) { |
| CXLUpstreamPort *usp = CXL_USP(cci->d); |
| |
| tunnel_target = pcie_find_port_by_pn(&PCI_BRIDGE(usp)->sec_bus, |
| in->port_or_ld_id); |
| if (!tunnel_target) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| tunnel_target = |
| pci_bridge_get_sec_bus(PCI_BRIDGE(tunnel_target))->devices[0]; |
| if (!tunnel_target) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| if (object_dynamic_cast(OBJECT(tunnel_target), TYPE_CXL_TYPE3)) { |
| CXLType3Dev *ct3d = CXL_TYPE3(tunnel_target); |
| /* Tunneled VDMs always land on FM Owned LD */ |
| target_cci = &ct3d->vdm_fm_owned_ld_mctp_cci; |
| } else { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| } else { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| pl_length = in->ccimessage.pl_length[2] << 16 | |
| in->ccimessage.pl_length[1] << 8 | in->ccimessage.pl_length[0]; |
| rc = cxl_process_cci_message(target_cci, |
| in->ccimessage.command_set, |
| in->ccimessage.command, |
| pl_length, in->ccimessage.payload, |
| &length_out, out->ccimessage.payload, |
| &bg_started); |
| /* Payload should be in place. Rest of CCI header and needs filling */ |
| out->resp_len = length_out + sizeof(CXLCCIMessage); |
| st24_le_p(out->ccimessage.pl_length, length_out); |
| out->ccimessage.rc = rc; |
| out->ccimessage.category = CXL_CCI_CAT_RSP; |
| out->ccimessage.command = in->ccimessage.command; |
| out->ccimessage.command_set = in->ccimessage.command_set; |
| out->ccimessage.tag = in->ccimessage.tag; |
| *len_out = length_out + sizeof(*out); |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| static CXLRetCode cmd_events_get_records(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, size_t len_in, |
| uint8_t *payload_out, size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLDeviceState *cxlds = &CXL_TYPE3(cci->d)->cxl_dstate; |
| CXLGetEventPayload *pl; |
| uint8_t log_type; |
| int max_recs; |
| |
| if (cmd->in < sizeof(log_type)) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| log_type = payload_in[0]; |
| |
| pl = (CXLGetEventPayload *)payload_out; |
| |
| max_recs = (cxlds->payload_size - CXL_EVENT_PAYLOAD_HDR_SIZE) / |
| CXL_EVENT_RECORD_SIZE; |
| if (max_recs > 0xFFFF) { |
| max_recs = 0xFFFF; |
| } |
| |
| return cxl_event_get_records(cxlds, pl, log_type, max_recs, len_out); |
| } |
| |
| static CXLRetCode cmd_events_clear_records(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLDeviceState *cxlds = &CXL_TYPE3(cci->d)->cxl_dstate; |
| CXLClearEventPayload *pl; |
| |
| pl = (CXLClearEventPayload *)payload_in; |
| |
| if (len_in < sizeof(*pl) || |
| len_in < sizeof(*pl) + sizeof(*pl->handle) * pl->nr_recs) { |
| return CXL_MBOX_INVALID_PAYLOAD_LENGTH; |
| } |
| |
| *len_out = 0; |
| return cxl_event_clear_records(cxlds, pl); |
| } |
| |
| static CXLRetCode cmd_events_get_interrupt_policy(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLDeviceState *cxlds = &CXL_TYPE3(cci->d)->cxl_dstate; |
| CXLEventInterruptPolicy *policy; |
| CXLEventLog *log; |
| |
| policy = (CXLEventInterruptPolicy *)payload_out; |
| |
| log = &cxlds->event_logs[CXL_EVENT_TYPE_INFO]; |
| if (log->irq_enabled) { |
| policy->info_settings = CXL_EVENT_INT_SETTING(log->irq_vec); |
| } |
| |
| log = &cxlds->event_logs[CXL_EVENT_TYPE_WARN]; |
| if (log->irq_enabled) { |
| policy->warn_settings = CXL_EVENT_INT_SETTING(log->irq_vec); |
| } |
| |
| log = &cxlds->event_logs[CXL_EVENT_TYPE_FAIL]; |
| if (log->irq_enabled) { |
| policy->failure_settings = CXL_EVENT_INT_SETTING(log->irq_vec); |
| } |
| |
| log = &cxlds->event_logs[CXL_EVENT_TYPE_FATAL]; |
| if (log->irq_enabled) { |
| policy->fatal_settings = CXL_EVENT_INT_SETTING(log->irq_vec); |
| } |
| |
| log = &cxlds->event_logs[CXL_EVENT_TYPE_DYNAMIC_CAP]; |
| if (log->irq_enabled) { |
| /* Dynamic Capacity borrows the same vector as info */ |
| policy->dyn_cap_settings = CXL_INT_MSI_MSIX; |
| } |
| |
| *len_out = sizeof(*policy); |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| static CXLRetCode cmd_events_set_interrupt_policy(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLDeviceState *cxlds = &CXL_TYPE3(cci->d)->cxl_dstate; |
| CXLEventInterruptPolicy *policy; |
| CXLEventLog *log; |
| |
| if (len_in < CXL_EVENT_INT_SETTING_MIN_LEN) { |
| return CXL_MBOX_INVALID_PAYLOAD_LENGTH; |
| } |
| |
| policy = (CXLEventInterruptPolicy *)payload_in; |
| |
| log = &cxlds->event_logs[CXL_EVENT_TYPE_INFO]; |
| log->irq_enabled = (policy->info_settings & CXL_EVENT_INT_MODE_MASK) == |
| CXL_INT_MSI_MSIX; |
| |
| log = &cxlds->event_logs[CXL_EVENT_TYPE_WARN]; |
| log->irq_enabled = (policy->warn_settings & CXL_EVENT_INT_MODE_MASK) == |
| CXL_INT_MSI_MSIX; |
| |
| log = &cxlds->event_logs[CXL_EVENT_TYPE_FAIL]; |
| log->irq_enabled = (policy->failure_settings & CXL_EVENT_INT_MODE_MASK) == |
| CXL_INT_MSI_MSIX; |
| |
| log = &cxlds->event_logs[CXL_EVENT_TYPE_FATAL]; |
| log->irq_enabled = (policy->fatal_settings & CXL_EVENT_INT_MODE_MASK) == |
| CXL_INT_MSI_MSIX; |
| |
| /* DCD is optional */ |
| if (len_in < sizeof(*policy)) { |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| log = &cxlds->event_logs[CXL_EVENT_TYPE_DYNAMIC_CAP]; |
| log->irq_enabled = (policy->dyn_cap_settings & CXL_EVENT_INT_MODE_MASK) == |
| CXL_INT_MSI_MSIX; |
| |
| *len_out = 0; |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 section 8.2.9.1.1: Identify (Opcode 0001h) */ |
| static CXLRetCode cmd_infostat_identify(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| PCIDeviceClass *class = PCI_DEVICE_GET_CLASS(cci->d); |
| struct { |
| uint16_t pcie_vid; |
| uint16_t pcie_did; |
| uint16_t pcie_subsys_vid; |
| uint16_t pcie_subsys_id; |
| uint64_t sn; |
| uint8_t max_message_size; |
| uint8_t component_type; |
| } QEMU_PACKED *is_identify; |
| QEMU_BUILD_BUG_ON(sizeof(*is_identify) != 18); |
| |
| is_identify = (void *)payload_out; |
| is_identify->pcie_vid = class->vendor_id; |
| is_identify->pcie_did = class->device_id; |
| if (object_dynamic_cast(OBJECT(cci->d), TYPE_CXL_USP)) { |
| is_identify->sn = CXL_USP(cci->d)->sn; |
| /* Subsystem info not defined for a USP */ |
| is_identify->pcie_subsys_vid = 0; |
| is_identify->pcie_subsys_id = 0; |
| is_identify->component_type = 0x0; /* Switch */ |
| } else if (object_dynamic_cast(OBJECT(cci->d), TYPE_CXL_TYPE3)) { |
| PCIDevice *pci_dev = PCI_DEVICE(cci->d); |
| |
| is_identify->sn = CXL_TYPE3(cci->d)->sn; |
| /* |
| * We can't always use class->subsystem_vendor_id as |
| * it is not set if the defaults are used. |
| */ |
| is_identify->pcie_subsys_vid = |
| pci_get_word(pci_dev->config + PCI_SUBSYSTEM_VENDOR_ID); |
| is_identify->pcie_subsys_id = |
| pci_get_word(pci_dev->config + PCI_SUBSYSTEM_ID); |
| is_identify->component_type = 0x3; /* Type 3 */ |
| } |
| |
| /* TODO: Allow this to vary across different CCIs */ |
| is_identify->max_message_size = 9; /* 512 bytes - MCTP_CXL_MAILBOX_BYTES */ |
| *len_out = sizeof(*is_identify); |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| static void cxl_set_dsp_active_bm(PCIBus *b, PCIDevice *d, |
| void *private) |
| { |
| uint8_t *bm = private; |
| if (object_dynamic_cast(OBJECT(d), TYPE_CXL_DSP)) { |
| uint8_t port = PCIE_PORT(d)->port; |
| bm[port / 8] |= 1 << (port % 8); |
| } |
| } |
| |
| /* CXL r3.1 Section 7.6.7.1.1: Identify Switch Device (Opcode 5100h) */ |
| static CXLRetCode cmd_identify_switch_device(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| PCIEPort *usp = PCIE_PORT(cci->d); |
| PCIBus *bus = &PCI_BRIDGE(cci->d)->sec_bus; |
| int num_phys_ports = pcie_count_ds_ports(bus); |
| |
| struct cxl_fmapi_ident_switch_dev_resp_pl { |
| uint8_t ingress_port_id; |
| uint8_t rsvd; |
| uint8_t num_physical_ports; |
| uint8_t num_vcss; |
| uint8_t active_port_bitmask[0x20]; |
| uint8_t active_vcs_bitmask[0x20]; |
| uint16_t total_vppbs; |
| uint16_t bound_vppbs; |
| uint8_t num_hdm_decoders_per_usp; |
| } QEMU_PACKED *out; |
| QEMU_BUILD_BUG_ON(sizeof(*out) != 0x49); |
| |
| out = (struct cxl_fmapi_ident_switch_dev_resp_pl *)payload_out; |
| *out = (struct cxl_fmapi_ident_switch_dev_resp_pl) { |
| .num_physical_ports = num_phys_ports + 1, /* 1 USP */ |
| .num_vcss = 1, /* Not yet support multiple VCS - potentially tricky */ |
| .active_vcs_bitmask[0] = 0x1, |
| .total_vppbs = num_phys_ports + 1, |
| .bound_vppbs = num_phys_ports + 1, |
| .num_hdm_decoders_per_usp = 4, |
| }; |
| |
| /* Depends on the CCI type */ |
| if (object_dynamic_cast(OBJECT(cci->intf), TYPE_PCIE_PORT)) { |
| out->ingress_port_id = PCIE_PORT(cci->intf)->port; |
| } else { |
| /* MCTP? */ |
| out->ingress_port_id = 0; |
| } |
| |
| pci_for_each_device_under_bus(bus, cxl_set_dsp_active_bm, |
| out->active_port_bitmask); |
| out->active_port_bitmask[usp->port / 8] |= (1 << usp->port % 8); |
| |
| *len_out = sizeof(*out); |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 Section 7.6.7.1.2: Get Physical Port State (Opcode 5101h) */ |
| static CXLRetCode cmd_get_physical_port_state(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| /* CXL r3.1 Table 7-17: Get Physical Port State Request Payload */ |
| struct cxl_fmapi_get_phys_port_state_req_pl { |
| uint8_t num_ports; |
| uint8_t ports[]; |
| } QEMU_PACKED *in; |
| |
| /* |
| * CXL r3.1 Table 7-19: Get Physical Port State Port Information Block |
| * Format |
| */ |
| struct cxl_fmapi_port_state_info_block { |
| uint8_t port_id; |
| uint8_t config_state; |
| uint8_t connected_device_cxl_version; |
| uint8_t rsv1; |
| uint8_t connected_device_type; |
| uint8_t port_cxl_version_bitmask; |
| uint8_t max_link_width; |
| uint8_t negotiated_link_width; |
| uint8_t supported_link_speeds_vector; |
| uint8_t max_link_speed; |
| uint8_t current_link_speed; |
| uint8_t ltssm_state; |
| uint8_t first_lane_num; |
| uint16_t link_state; |
| uint8_t supported_ld_count; |
| } QEMU_PACKED; |
| |
| /* CXL r3.1 Table 7-18: Get Physical Port State Response Payload */ |
| struct cxl_fmapi_get_phys_port_state_resp_pl { |
| uint8_t num_ports; |
| uint8_t rsv1[3]; |
| struct cxl_fmapi_port_state_info_block ports[]; |
| } QEMU_PACKED *out; |
| PCIBus *bus = &PCI_BRIDGE(cci->d)->sec_bus; |
| PCIEPort *usp = PCIE_PORT(cci->d); |
| size_t pl_size; |
| int i; |
| |
| in = (struct cxl_fmapi_get_phys_port_state_req_pl *)payload_in; |
| out = (struct cxl_fmapi_get_phys_port_state_resp_pl *)payload_out; |
| |
| /* Check if what was requested can fit */ |
| if (sizeof(*out) + sizeof(*out->ports) * in->num_ports > cci->payload_max) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| /* For success there should be a match for each requested */ |
| out->num_ports = in->num_ports; |
| |
| for (i = 0; i < in->num_ports; i++) { |
| struct cxl_fmapi_port_state_info_block *port; |
| /* First try to match on downstream port */ |
| PCIDevice *port_dev; |
| uint16_t lnkcap, lnkcap2, lnksta; |
| |
| port = &out->ports[i]; |
| |
| port_dev = pcie_find_port_by_pn(bus, in->ports[i]); |
| if (port_dev) { /* DSP */ |
| PCIDevice *ds_dev = pci_bridge_get_sec_bus(PCI_BRIDGE(port_dev)) |
| ->devices[0]; |
| port->config_state = 3; |
| if (ds_dev) { |
| if (object_dynamic_cast(OBJECT(ds_dev), TYPE_CXL_TYPE3)) { |
| port->connected_device_type = 5; /* Assume MLD for now */ |
| } else { |
| port->connected_device_type = 1; |
| } |
| } else { |
| port->connected_device_type = 0; |
| } |
| port->supported_ld_count = 3; |
| } else if (usp->port == in->ports[i]) { /* USP */ |
| port_dev = PCI_DEVICE(usp); |
| port->config_state = 4; |
| port->connected_device_type = 0; |
| } else { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| port->port_id = in->ports[i]; |
| /* Information on status of this port in lnksta, lnkcap */ |
| if (!port_dev->exp.exp_cap) { |
| return CXL_MBOX_INTERNAL_ERROR; |
| } |
| lnksta = port_dev->config_read(port_dev, |
| port_dev->exp.exp_cap + PCI_EXP_LNKSTA, |
| sizeof(lnksta)); |
| lnkcap = port_dev->config_read(port_dev, |
| port_dev->exp.exp_cap + PCI_EXP_LNKCAP, |
| sizeof(lnkcap)); |
| lnkcap2 = port_dev->config_read(port_dev, |
| port_dev->exp.exp_cap + PCI_EXP_LNKCAP2, |
| sizeof(lnkcap2)); |
| |
| port->max_link_width = (lnkcap & PCI_EXP_LNKCAP_MLW) >> 4; |
| port->negotiated_link_width = (lnksta & PCI_EXP_LNKSTA_NLW) >> 4; |
| /* No definition for SLS field in linux/pci_regs.h */ |
| port->supported_link_speeds_vector = (lnkcap2 & 0xFE) >> 1; |
| port->max_link_speed = lnkcap & PCI_EXP_LNKCAP_SLS; |
| port->current_link_speed = lnksta & PCI_EXP_LNKSTA_CLS; |
| /* TODO: Track down if we can get the rest of the info */ |
| port->ltssm_state = 0x7; |
| port->first_lane_num = 0; |
| port->link_state = 0; |
| port->port_cxl_version_bitmask = 0x2; |
| port->connected_device_cxl_version = 0x2; |
| } |
| |
| pl_size = sizeof(*out) + sizeof(*out->ports) * in->num_ports; |
| *len_out = pl_size; |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 Section 8.2.9.1.2: Background Operation Status (Opcode 0002h) */ |
| static CXLRetCode cmd_infostat_bg_op_sts(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| struct { |
| uint8_t status; |
| uint8_t rsvd; |
| uint16_t opcode; |
| uint16_t returncode; |
| uint16_t vendor_ext_status; |
| } QEMU_PACKED *bg_op_status; |
| QEMU_BUILD_BUG_ON(sizeof(*bg_op_status) != 8); |
| |
| bg_op_status = (void *)payload_out; |
| bg_op_status->status = cci->bg.complete_pct << 1; |
| if (cci->bg.runtime > 0) { |
| bg_op_status->status |= 1U << 0; |
| } |
| bg_op_status->opcode = cci->bg.opcode; |
| bg_op_status->returncode = cci->bg.ret_code; |
| *len_out = sizeof(*bg_op_status); |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| #define CXL_FW_SLOTS 2 |
| #define CXL_FW_SIZE 0x02000000 /* 32 mb */ |
| |
| /* CXL r3.1 Section 8.2.9.3.1: Get FW Info (Opcode 0200h) */ |
| static CXLRetCode cmd_firmware_update_get_info(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| CXLDeviceState *cxl_dstate = &ct3d->cxl_dstate; |
| struct { |
| uint8_t slots_supported; |
| uint8_t slot_info; |
| uint8_t caps; |
| uint8_t rsvd[0xd]; |
| char fw_rev1[0x10]; |
| char fw_rev2[0x10]; |
| char fw_rev3[0x10]; |
| char fw_rev4[0x10]; |
| } QEMU_PACKED *fw_info; |
| QEMU_BUILD_BUG_ON(sizeof(*fw_info) != 0x50); |
| |
| if (!QEMU_IS_ALIGNED(cxl_dstate->vmem_size, CXL_CAPACITY_MULTIPLIER) || |
| !QEMU_IS_ALIGNED(cxl_dstate->pmem_size, CXL_CAPACITY_MULTIPLIER) || |
| !QEMU_IS_ALIGNED(ct3d->dc.total_capacity, CXL_CAPACITY_MULTIPLIER)) { |
| return CXL_MBOX_INTERNAL_ERROR; |
| } |
| |
| fw_info = (void *)payload_out; |
| |
| fw_info->slots_supported = CXL_FW_SLOTS; |
| fw_info->slot_info = (cci->fw.active_slot & 0x7) | |
| ((cci->fw.staged_slot & 0x7) << 3); |
| fw_info->caps = BIT(0); /* online update supported */ |
| |
| if (cci->fw.slot[0]) { |
| pstrcpy(fw_info->fw_rev1, sizeof(fw_info->fw_rev1), "BWFW VERSION 0"); |
| } |
| if (cci->fw.slot[1]) { |
| pstrcpy(fw_info->fw_rev2, sizeof(fw_info->fw_rev2), "BWFW VERSION 1"); |
| } |
| |
| *len_out = sizeof(*fw_info); |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 section 8.2.9.3.2: Transfer FW (Opcode 0201h) */ |
| #define CXL_FW_XFER_ALIGNMENT 128 |
| |
| #define CXL_FW_XFER_ACTION_FULL 0x0 |
| #define CXL_FW_XFER_ACTION_INIT 0x1 |
| #define CXL_FW_XFER_ACTION_CONTINUE 0x2 |
| #define CXL_FW_XFER_ACTION_END 0x3 |
| #define CXL_FW_XFER_ACTION_ABORT 0x4 |
| |
| static CXLRetCode cmd_firmware_update_transfer(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| struct { |
| uint8_t action; |
| uint8_t slot; |
| uint8_t rsvd1[2]; |
| uint32_t offset; |
| uint8_t rsvd2[0x78]; |
| uint8_t data[]; |
| } QEMU_PACKED *fw_transfer = (void *)payload_in; |
| size_t offset, length; |
| |
| if (len < sizeof(*fw_transfer)) { |
| return CXL_MBOX_INVALID_PAYLOAD_LENGTH; |
| } |
| |
| if (fw_transfer->action == CXL_FW_XFER_ACTION_ABORT) { |
| /* |
| * At this point there aren't any on-going transfers |
| * running in the bg - this is serialized before this |
| * call altogether. Just mark the state machine and |
| * disregard any other input. |
| */ |
| cci->fw.transferring = false; |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| offset = fw_transfer->offset * CXL_FW_XFER_ALIGNMENT; |
| length = len - sizeof(*fw_transfer); |
| if (offset + length > CXL_FW_SIZE) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| if (cci->fw.transferring) { |
| if (fw_transfer->action == CXL_FW_XFER_ACTION_FULL || |
| fw_transfer->action == CXL_FW_XFER_ACTION_INIT) { |
| return CXL_MBOX_FW_XFER_IN_PROGRESS; |
| } |
| /* |
| * Abort partitioned package transfer if over 30 secs |
| * between parts. As opposed to the explicit ABORT action, |
| * semantically treat this condition as an error - as |
| * if a part action were passed without a previous INIT. |
| */ |
| if (difftime(time(NULL), cci->fw.last_partxfer) > 30.0) { |
| cci->fw.transferring = false; |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| } else if (fw_transfer->action == CXL_FW_XFER_ACTION_CONTINUE || |
| fw_transfer->action == CXL_FW_XFER_ACTION_END) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| /* allow back-to-back retransmission */ |
| if ((offset != cci->fw.prev_offset || length != cci->fw.prev_len) && |
| (fw_transfer->action == CXL_FW_XFER_ACTION_CONTINUE || |
| fw_transfer->action == CXL_FW_XFER_ACTION_END)) { |
| /* verify no overlaps */ |
| if (offset < cci->fw.prev_offset + cci->fw.prev_len) { |
| return CXL_MBOX_FW_XFER_OUT_OF_ORDER; |
| } |
| } |
| |
| switch (fw_transfer->action) { |
| case CXL_FW_XFER_ACTION_FULL: /* ignores offset */ |
| case CXL_FW_XFER_ACTION_END: |
| if (fw_transfer->slot == 0 || |
| fw_transfer->slot == cci->fw.active_slot || |
| fw_transfer->slot > CXL_FW_SLOTS) { |
| return CXL_MBOX_FW_INVALID_SLOT; |
| } |
| |
| /* mark the slot used upon bg completion */ |
| break; |
| case CXL_FW_XFER_ACTION_INIT: |
| if (offset != 0) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| cci->fw.transferring = true; |
| cci->fw.prev_offset = offset; |
| cci->fw.prev_len = length; |
| break; |
| case CXL_FW_XFER_ACTION_CONTINUE: |
| cci->fw.prev_offset = offset; |
| cci->fw.prev_len = length; |
| break; |
| default: |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| if (fw_transfer->action == CXL_FW_XFER_ACTION_FULL) { |
| cci->bg.runtime = 10 * 1000UL; |
| } else { |
| cci->bg.runtime = 2 * 1000UL; |
| } |
| /* keep relevant context for bg completion */ |
| cci->fw.curr_action = fw_transfer->action; |
| cci->fw.curr_slot = fw_transfer->slot; |
| *len_out = 0; |
| |
| return CXL_MBOX_BG_STARTED; |
| } |
| |
| static void __do_firmware_xfer(CXLCCI *cci) |
| { |
| switch (cci->fw.curr_action) { |
| case CXL_FW_XFER_ACTION_FULL: |
| case CXL_FW_XFER_ACTION_END: |
| cci->fw.slot[cci->fw.curr_slot - 1] = true; |
| cci->fw.transferring = false; |
| break; |
| case CXL_FW_XFER_ACTION_INIT: |
| case CXL_FW_XFER_ACTION_CONTINUE: |
| time(&cci->fw.last_partxfer); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /* CXL r3.1 section 8.2.9.3.3: Activate FW (Opcode 0202h) */ |
| static CXLRetCode cmd_firmware_update_activate(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| struct { |
| uint8_t action; |
| uint8_t slot; |
| } QEMU_PACKED *fw_activate = (void *)payload_in; |
| QEMU_BUILD_BUG_ON(sizeof(*fw_activate) != 0x2); |
| |
| if (fw_activate->slot == 0 || |
| fw_activate->slot == cci->fw.active_slot || |
| fw_activate->slot > CXL_FW_SLOTS) { |
| return CXL_MBOX_FW_INVALID_SLOT; |
| } |
| |
| /* ensure that an actual fw package is there */ |
| if (!cci->fw.slot[fw_activate->slot - 1]) { |
| return CXL_MBOX_FW_INVALID_SLOT; |
| } |
| |
| switch (fw_activate->action) { |
| case 0: /* online */ |
| cci->fw.active_slot = fw_activate->slot; |
| break; |
| case 1: /* reset */ |
| cci->fw.staged_slot = fw_activate->slot; |
| break; |
| default: |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 Section 8.2.9.4.1: Get Timestamp (Opcode 0300h) */ |
| static CXLRetCode cmd_timestamp_get(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLDeviceState *cxl_dstate = &CXL_TYPE3(cci->d)->cxl_dstate; |
| uint64_t final_time = cxl_device_get_timestamp(cxl_dstate); |
| |
| stq_le_p(payload_out, final_time); |
| *len_out = 8; |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 Section 8.2.9.4.2: Set Timestamp (Opcode 0301h) */ |
| static CXLRetCode cmd_timestamp_set(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLDeviceState *cxl_dstate = &CXL_TYPE3(cci->d)->cxl_dstate; |
| |
| cxl_dstate->timestamp.set = true; |
| cxl_dstate->timestamp.last_set = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); |
| |
| cxl_dstate->timestamp.host_set = le64_to_cpu(*(uint64_t *)payload_in); |
| |
| *len_out = 0; |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 Section 8.2.9.5.2.1: Command Effects Log (CEL) */ |
| static const QemuUUID cel_uuid = { |
| .data = UUID(0x0da9c0b5, 0xbf41, 0x4b78, 0x8f, 0x79, |
| 0x96, 0xb1, 0x62, 0x3b, 0x3f, 0x17) |
| }; |
| |
| /* CXL r3.1 Section 8.2.9.5.1: Get Supported Logs (Opcode 0400h) */ |
| static CXLRetCode cmd_logs_get_supported(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| struct { |
| uint16_t entries; |
| uint8_t rsvd[6]; |
| struct { |
| QemuUUID uuid; |
| uint32_t size; |
| } log_entries[1]; |
| } QEMU_PACKED *supported_logs = (void *)payload_out; |
| QEMU_BUILD_BUG_ON(sizeof(*supported_logs) != 0x1c); |
| |
| supported_logs->entries = 1; |
| supported_logs->log_entries[0].uuid = cel_uuid; |
| supported_logs->log_entries[0].size = 4 * cci->cel_size; |
| |
| *len_out = sizeof(*supported_logs); |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 Section 8.2.9.5.2: Get Log (Opcode 0401h) */ |
| static CXLRetCode cmd_logs_get_log(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| struct { |
| QemuUUID uuid; |
| uint32_t offset; |
| uint32_t length; |
| } QEMU_PACKED QEMU_ALIGNED(16) *get_log; |
| |
| get_log = (void *)payload_in; |
| |
| /* |
| * CXL r3.1 Section 8.2.9.5.2: Get Log (Opcode 0401h) |
| * The device shall return Invalid Input if the Offset or Length |
| * fields attempt to access beyond the size of the log as reported by Get |
| * Supported Logs. |
| * |
| * The CEL buffer is large enough to fit all commands in the emulation, so |
| * the only possible failure would be if the mailbox itself isn't big |
| * enough. |
| */ |
| if (get_log->offset + get_log->length > cci->payload_max) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| if (!qemu_uuid_is_equal(&get_log->uuid, &cel_uuid)) { |
| return CXL_MBOX_INVALID_LOG; |
| } |
| |
| /* Store off everything to local variables so we can wipe out the payload */ |
| *len_out = get_log->length; |
| |
| memmove(payload_out, cci->cel_log + get_log->offset, get_log->length); |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 section 8.2.9.6: Features */ |
| /* |
| * Get Supported Features output payload |
| * CXL r3.1 section 8.2.9.6.1 Table 8-96 |
| */ |
| typedef struct CXLSupportedFeatureHeader { |
| uint16_t entries; |
| uint16_t nsuppfeats_dev; |
| uint32_t reserved; |
| } QEMU_PACKED CXLSupportedFeatureHeader; |
| |
| /* |
| * Get Supported Features Supported Feature Entry |
| * CXL r3.1 section 8.2.9.6.1 Table 8-97 |
| */ |
| typedef struct CXLSupportedFeatureEntry { |
| QemuUUID uuid; |
| uint16_t feat_index; |
| uint16_t get_feat_size; |
| uint16_t set_feat_size; |
| uint32_t attr_flags; |
| uint8_t get_feat_version; |
| uint8_t set_feat_version; |
| uint16_t set_feat_effects; |
| uint8_t rsvd[18]; |
| } QEMU_PACKED CXLSupportedFeatureEntry; |
| |
| /* |
| * Get Supported Features Supported Feature Entry |
| * CXL rev 3.1 section 8.2.9.6.1 Table 8-97 |
| */ |
| /* Supported Feature Entry : attribute flags */ |
| #define CXL_FEAT_ENTRY_ATTR_FLAG_CHANGABLE BIT(0) |
| #define CXL_FEAT_ENTRY_ATTR_FLAG_DEEPEST_RESET_PERSISTENCE_MASK GENMASK(3, 1) |
| #define CXL_FEAT_ENTRY_ATTR_FLAG_PERSIST_ACROSS_FIRMWARE_UPDATE BIT(4) |
| #define CXL_FEAT_ENTRY_ATTR_FLAG_SUPPORT_DEFAULT_SELECTION BIT(5) |
| #define CXL_FEAT_ENTRY_ATTR_FLAG_SUPPORT_SAVED_SELECTION BIT(6) |
| |
| /* Supported Feature Entry : set feature effects */ |
| #define CXL_FEAT_ENTRY_SFE_CONFIG_CHANGE_COLD_RESET BIT(0) |
| #define CXL_FEAT_ENTRY_SFE_IMMEDIATE_CONFIG_CHANGE BIT(1) |
| #define CXL_FEAT_ENTRY_SFE_IMMEDIATE_DATA_CHANGE BIT(2) |
| #define CXL_FEAT_ENTRY_SFE_IMMEDIATE_POLICY_CHANGE BIT(3) |
| #define CXL_FEAT_ENTRY_SFE_IMMEDIATE_LOG_CHANGE BIT(4) |
| #define CXL_FEAT_ENTRY_SFE_SECURITY_STATE_CHANGE BIT(5) |
| #define CXL_FEAT_ENTRY_SFE_BACKGROUND_OPERATION BIT(6) |
| #define CXL_FEAT_ENTRY_SFE_SUPPORT_SECONDARY_MAILBOX BIT(7) |
| #define CXL_FEAT_ENTRY_SFE_SUPPORT_ABORT_BACKGROUND_OPERATION BIT(8) |
| #define CXL_FEAT_ENTRY_SFE_CEL_VALID BIT(9) |
| #define CXL_FEAT_ENTRY_SFE_CONFIG_CHANGE_CONV_RESET BIT(10) |
| #define CXL_FEAT_ENTRY_SFE_CONFIG_CHANGE_CXL_RESET BIT(11) |
| |
| enum CXL_SUPPORTED_FEATURES_LIST { |
| CXL_FEATURE_PATROL_SCRUB = 0, |
| CXL_FEATURE_ECS, |
| CXL_FEATURE_MAX |
| }; |
| |
| /* Get Feature CXL 3.1 Spec 8.2.9.6.2 */ |
| /* |
| * Get Feature input payload |
| * CXL r3.1 section 8.2.9.6.2 Table 8-99 |
| */ |
| /* Get Feature : Payload in selection */ |
| enum CXL_GET_FEATURE_SELECTION { |
| CXL_GET_FEATURE_SEL_CURRENT_VALUE, |
| CXL_GET_FEATURE_SEL_DEFAULT_VALUE, |
| CXL_GET_FEATURE_SEL_SAVED_VALUE, |
| CXL_GET_FEATURE_SEL_MAX |
| }; |
| |
| /* Set Feature CXL 3.1 Spec 8.2.9.6.3 */ |
| /* |
| * Set Feature input payload |
| * CXL r3.1 section 8.2.9.6.3 Table 8-101 |
| */ |
| typedef struct CXLSetFeatureInHeader { |
| QemuUUID uuid; |
| uint32_t flags; |
| uint16_t offset; |
| uint8_t version; |
| uint8_t rsvd[9]; |
| } QEMU_PACKED QEMU_ALIGNED(16) CXLSetFeatureInHeader; |
| |
| /* Set Feature : Payload in flags */ |
| #define CXL_SET_FEATURE_FLAG_DATA_TRANSFER_MASK 0x7 |
| enum CXL_SET_FEATURE_FLAG_DATA_TRANSFER { |
| CXL_SET_FEATURE_FLAG_FULL_DATA_TRANSFER, |
| CXL_SET_FEATURE_FLAG_INITIATE_DATA_TRANSFER, |
| CXL_SET_FEATURE_FLAG_CONTINUE_DATA_TRANSFER, |
| CXL_SET_FEATURE_FLAG_FINISH_DATA_TRANSFER, |
| CXL_SET_FEATURE_FLAG_ABORT_DATA_TRANSFER, |
| CXL_SET_FEATURE_FLAG_DATA_TRANSFER_MAX |
| }; |
| #define CXL_SET_FEAT_DATA_SAVED_ACROSS_RESET BIT(3) |
| |
| /* CXL r3.1 section 8.2.9.9.11.1: Device Patrol Scrub Control Feature */ |
| static const QemuUUID patrol_scrub_uuid = { |
| .data = UUID(0x96dad7d6, 0xfde8, 0x482b, 0xa7, 0x33, |
| 0x75, 0x77, 0x4e, 0x06, 0xdb, 0x8a) |
| }; |
| |
| typedef struct CXLMemPatrolScrubSetFeature { |
| CXLSetFeatureInHeader hdr; |
| CXLMemPatrolScrubWriteAttrs feat_data; |
| } QEMU_PACKED QEMU_ALIGNED(16) CXLMemPatrolScrubSetFeature; |
| |
| /* |
| * CXL r3.1 section 8.2.9.9.11.2: |
| * DDR5 Error Check Scrub (ECS) Control Feature |
| */ |
| static const QemuUUID ecs_uuid = { |
| .data = UUID(0xe5b13f22, 0x2328, 0x4a14, 0xb8, 0xba, |
| 0xb9, 0x69, 0x1e, 0x89, 0x33, 0x86) |
| }; |
| |
| typedef struct CXLMemECSSetFeature { |
| CXLSetFeatureInHeader hdr; |
| CXLMemECSWriteAttrs feat_data[]; |
| } QEMU_PACKED QEMU_ALIGNED(16) CXLMemECSSetFeature; |
| |
| /* CXL r3.1 section 8.2.9.6.1: Get Supported Features (Opcode 0500h) */ |
| static CXLRetCode cmd_features_get_supported(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| struct { |
| uint32_t count; |
| uint16_t start_index; |
| uint16_t reserved; |
| } QEMU_PACKED QEMU_ALIGNED(16) * get_feats_in = (void *)payload_in; |
| |
| struct { |
| CXLSupportedFeatureHeader hdr; |
| CXLSupportedFeatureEntry feat_entries[]; |
| } QEMU_PACKED QEMU_ALIGNED(16) * get_feats_out = (void *)payload_out; |
| uint16_t index, req_entries; |
| uint16_t entry; |
| |
| if (!object_dynamic_cast(OBJECT(cci->d), TYPE_CXL_TYPE3)) { |
| return CXL_MBOX_UNSUPPORTED; |
| } |
| if (get_feats_in->count < sizeof(CXLSupportedFeatureHeader) || |
| get_feats_in->start_index >= CXL_FEATURE_MAX) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| req_entries = (get_feats_in->count - |
| sizeof(CXLSupportedFeatureHeader)) / |
| sizeof(CXLSupportedFeatureEntry); |
| req_entries = MIN(req_entries, |
| (CXL_FEATURE_MAX - get_feats_in->start_index)); |
| |
| for (entry = 0, index = get_feats_in->start_index; |
| entry < req_entries; index++) { |
| switch (index) { |
| case CXL_FEATURE_PATROL_SCRUB: |
| /* Fill supported feature entry for device patrol scrub control */ |
| get_feats_out->feat_entries[entry++] = |
| (struct CXLSupportedFeatureEntry) { |
| .uuid = patrol_scrub_uuid, |
| .feat_index = index, |
| .get_feat_size = sizeof(CXLMemPatrolScrubReadAttrs), |
| .set_feat_size = sizeof(CXLMemPatrolScrubWriteAttrs), |
| .attr_flags = CXL_FEAT_ENTRY_ATTR_FLAG_CHANGABLE, |
| .get_feat_version = CXL_MEMDEV_PS_GET_FEATURE_VERSION, |
| .set_feat_version = CXL_MEMDEV_PS_SET_FEATURE_VERSION, |
| .set_feat_effects = CXL_FEAT_ENTRY_SFE_IMMEDIATE_CONFIG_CHANGE | |
| CXL_FEAT_ENTRY_SFE_CEL_VALID, |
| }; |
| break; |
| case CXL_FEATURE_ECS: |
| /* Fill supported feature entry for device DDR5 ECS control */ |
| get_feats_out->feat_entries[entry++] = |
| (struct CXLSupportedFeatureEntry) { |
| .uuid = ecs_uuid, |
| .feat_index = index, |
| .get_feat_size = sizeof(CXLMemECSReadAttrs), |
| .set_feat_size = sizeof(CXLMemECSWriteAttrs), |
| .attr_flags = CXL_FEAT_ENTRY_ATTR_FLAG_CHANGABLE, |
| .get_feat_version = CXL_ECS_GET_FEATURE_VERSION, |
| .set_feat_version = CXL_ECS_SET_FEATURE_VERSION, |
| .set_feat_effects = CXL_FEAT_ENTRY_SFE_IMMEDIATE_CONFIG_CHANGE | |
| CXL_FEAT_ENTRY_SFE_CEL_VALID, |
| }; |
| break; |
| default: |
| __builtin_unreachable(); |
| } |
| } |
| get_feats_out->hdr.nsuppfeats_dev = CXL_FEATURE_MAX; |
| get_feats_out->hdr.entries = req_entries; |
| *len_out = sizeof(CXLSupportedFeatureHeader) + |
| req_entries * sizeof(CXLSupportedFeatureEntry); |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 section 8.2.9.6.2: Get Feature (Opcode 0501h) */ |
| static CXLRetCode cmd_features_get_feature(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| struct { |
| QemuUUID uuid; |
| uint16_t offset; |
| uint16_t count; |
| uint8_t selection; |
| } QEMU_PACKED QEMU_ALIGNED(16) * get_feature; |
| uint16_t bytes_to_copy = 0; |
| CXLType3Dev *ct3d; |
| CXLSetFeatureInfo *set_feat_info; |
| |
| if (!object_dynamic_cast(OBJECT(cci->d), TYPE_CXL_TYPE3)) { |
| return CXL_MBOX_UNSUPPORTED; |
| } |
| |
| ct3d = CXL_TYPE3(cci->d); |
| get_feature = (void *)payload_in; |
| |
| set_feat_info = &ct3d->set_feat_info; |
| if (qemu_uuid_is_equal(&get_feature->uuid, &set_feat_info->uuid)) { |
| return CXL_MBOX_FEATURE_TRANSFER_IN_PROGRESS; |
| } |
| |
| if (get_feature->selection != CXL_GET_FEATURE_SEL_CURRENT_VALUE) { |
| return CXL_MBOX_UNSUPPORTED; |
| } |
| if (get_feature->offset + get_feature->count > cci->payload_max) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| if (qemu_uuid_is_equal(&get_feature->uuid, &patrol_scrub_uuid)) { |
| if (get_feature->offset >= sizeof(CXLMemPatrolScrubReadAttrs)) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| bytes_to_copy = sizeof(CXLMemPatrolScrubReadAttrs) - |
| get_feature->offset; |
| bytes_to_copy = MIN(bytes_to_copy, get_feature->count); |
| memcpy(payload_out, |
| (uint8_t *)&ct3d->patrol_scrub_attrs + get_feature->offset, |
| bytes_to_copy); |
| } else if (qemu_uuid_is_equal(&get_feature->uuid, &ecs_uuid)) { |
| if (get_feature->offset >= sizeof(CXLMemECSReadAttrs)) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| bytes_to_copy = sizeof(CXLMemECSReadAttrs) - get_feature->offset; |
| bytes_to_copy = MIN(bytes_to_copy, get_feature->count); |
| memcpy(payload_out, |
| (uint8_t *)&ct3d->ecs_attrs + get_feature->offset, |
| bytes_to_copy); |
| } else { |
| return CXL_MBOX_UNSUPPORTED; |
| } |
| |
| *len_out = bytes_to_copy; |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 section 8.2.9.6.3: Set Feature (Opcode 0502h) */ |
| static CXLRetCode cmd_features_set_feature(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLSetFeatureInHeader *hdr = (void *)payload_in; |
| CXLMemPatrolScrubWriteAttrs *ps_write_attrs; |
| CXLMemPatrolScrubSetFeature *ps_set_feature; |
| CXLMemECSWriteAttrs *ecs_write_attrs; |
| CXLMemECSSetFeature *ecs_set_feature; |
| CXLSetFeatureInfo *set_feat_info; |
| uint16_t bytes_to_copy = 0; |
| uint8_t data_transfer_flag; |
| CXLType3Dev *ct3d; |
| uint16_t count; |
| |
| if (len_in < sizeof(*hdr)) { |
| return CXL_MBOX_INVALID_PAYLOAD_LENGTH; |
| } |
| |
| if (!object_dynamic_cast(OBJECT(cci->d), TYPE_CXL_TYPE3)) { |
| return CXL_MBOX_UNSUPPORTED; |
| } |
| ct3d = CXL_TYPE3(cci->d); |
| set_feat_info = &ct3d->set_feat_info; |
| |
| if (!qemu_uuid_is_null(&set_feat_info->uuid) && |
| !qemu_uuid_is_equal(&hdr->uuid, &set_feat_info->uuid)) { |
| return CXL_MBOX_FEATURE_TRANSFER_IN_PROGRESS; |
| } |
| if (hdr->flags & CXL_SET_FEAT_DATA_SAVED_ACROSS_RESET) { |
| set_feat_info->data_saved_across_reset = true; |
| } else { |
| set_feat_info->data_saved_across_reset = false; |
| } |
| |
| data_transfer_flag = |
| hdr->flags & CXL_SET_FEATURE_FLAG_DATA_TRANSFER_MASK; |
| if (data_transfer_flag == CXL_SET_FEATURE_FLAG_INITIATE_DATA_TRANSFER) { |
| set_feat_info->uuid = hdr->uuid; |
| set_feat_info->data_size = 0; |
| } |
| set_feat_info->data_transfer_flag = data_transfer_flag; |
| set_feat_info->data_offset = hdr->offset; |
| bytes_to_copy = len_in - sizeof(CXLSetFeatureInHeader); |
| |
| if (qemu_uuid_is_equal(&hdr->uuid, &patrol_scrub_uuid)) { |
| if (hdr->version != CXL_MEMDEV_PS_SET_FEATURE_VERSION) { |
| return CXL_MBOX_UNSUPPORTED; |
| } |
| |
| ps_set_feature = (void *)payload_in; |
| ps_write_attrs = &ps_set_feature->feat_data; |
| memcpy((uint8_t *)&ct3d->patrol_scrub_wr_attrs + hdr->offset, |
| ps_write_attrs, |
| bytes_to_copy); |
| set_feat_info->data_size += bytes_to_copy; |
| |
| if (data_transfer_flag == CXL_SET_FEATURE_FLAG_FULL_DATA_TRANSFER || |
| data_transfer_flag == CXL_SET_FEATURE_FLAG_FINISH_DATA_TRANSFER) { |
| ct3d->patrol_scrub_attrs.scrub_cycle &= ~0xFF; |
| ct3d->patrol_scrub_attrs.scrub_cycle |= |
| ct3d->patrol_scrub_wr_attrs.scrub_cycle_hr & 0xFF; |
| ct3d->patrol_scrub_attrs.scrub_flags &= ~0x1; |
| ct3d->patrol_scrub_attrs.scrub_flags |= |
| ct3d->patrol_scrub_wr_attrs.scrub_flags & 0x1; |
| } |
| } else if (qemu_uuid_is_equal(&hdr->uuid, |
| &ecs_uuid)) { |
| if (hdr->version != CXL_ECS_SET_FEATURE_VERSION) { |
| return CXL_MBOX_UNSUPPORTED; |
| } |
| |
| ecs_set_feature = (void *)payload_in; |
| ecs_write_attrs = ecs_set_feature->feat_data; |
| memcpy((uint8_t *)&ct3d->ecs_wr_attrs + hdr->offset, |
| ecs_write_attrs, |
| bytes_to_copy); |
| set_feat_info->data_size += bytes_to_copy; |
| |
| if (data_transfer_flag == CXL_SET_FEATURE_FLAG_FULL_DATA_TRANSFER || |
| data_transfer_flag == CXL_SET_FEATURE_FLAG_FINISH_DATA_TRANSFER) { |
| ct3d->ecs_attrs.ecs_log_cap = ct3d->ecs_wr_attrs.ecs_log_cap; |
| for (count = 0; count < CXL_ECS_NUM_MEDIA_FRUS; count++) { |
| ct3d->ecs_attrs.fru_attrs[count].ecs_config = |
| ct3d->ecs_wr_attrs.fru_attrs[count].ecs_config & 0x1F; |
| } |
| } |
| } else { |
| return CXL_MBOX_UNSUPPORTED; |
| } |
| |
| if (data_transfer_flag == CXL_SET_FEATURE_FLAG_FULL_DATA_TRANSFER || |
| data_transfer_flag == CXL_SET_FEATURE_FLAG_FINISH_DATA_TRANSFER || |
| data_transfer_flag == CXL_SET_FEATURE_FLAG_ABORT_DATA_TRANSFER) { |
| memset(&set_feat_info->uuid, 0, sizeof(QemuUUID)); |
| if (qemu_uuid_is_equal(&hdr->uuid, &patrol_scrub_uuid)) { |
| memset(&ct3d->patrol_scrub_wr_attrs, 0, set_feat_info->data_size); |
| } else if (qemu_uuid_is_equal(&hdr->uuid, &ecs_uuid)) { |
| memset(&ct3d->ecs_wr_attrs, 0, set_feat_info->data_size); |
| } |
| set_feat_info->data_transfer_flag = 0; |
| set_feat_info->data_saved_across_reset = false; |
| set_feat_info->data_offset = 0; |
| set_feat_info->data_size = 0; |
| } |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 Section 8.2.9.9.1.1: Identify Memory Device (Opcode 4000h) */ |
| static CXLRetCode cmd_identify_memory_device(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| struct { |
| char fw_revision[0x10]; |
| uint64_t total_capacity; |
| uint64_t volatile_capacity; |
| uint64_t persistent_capacity; |
| uint64_t partition_align; |
| uint16_t info_event_log_size; |
| uint16_t warning_event_log_size; |
| uint16_t failure_event_log_size; |
| uint16_t fatal_event_log_size; |
| uint32_t lsa_size; |
| uint8_t poison_list_max_mer[3]; |
| uint16_t inject_poison_limit; |
| uint8_t poison_caps; |
| uint8_t qos_telemetry_caps; |
| uint16_t dc_event_log_size; |
| } QEMU_PACKED *id; |
| QEMU_BUILD_BUG_ON(sizeof(*id) != 0x45); |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| CXLType3Class *cvc = CXL_TYPE3_GET_CLASS(ct3d); |
| CXLDeviceState *cxl_dstate = &ct3d->cxl_dstate; |
| |
| if ((!QEMU_IS_ALIGNED(cxl_dstate->vmem_size, CXL_CAPACITY_MULTIPLIER)) || |
| (!QEMU_IS_ALIGNED(cxl_dstate->pmem_size, CXL_CAPACITY_MULTIPLIER)) || |
| (!QEMU_IS_ALIGNED(ct3d->dc.total_capacity, CXL_CAPACITY_MULTIPLIER))) { |
| return CXL_MBOX_INTERNAL_ERROR; |
| } |
| |
| id = (void *)payload_out; |
| |
| snprintf(id->fw_revision, 0x10, "BWFW VERSION %02d", 0); |
| |
| stq_le_p(&id->total_capacity, |
| cxl_dstate->static_mem_size / CXL_CAPACITY_MULTIPLIER); |
| stq_le_p(&id->persistent_capacity, |
| cxl_dstate->pmem_size / CXL_CAPACITY_MULTIPLIER); |
| stq_le_p(&id->volatile_capacity, |
| cxl_dstate->vmem_size / CXL_CAPACITY_MULTIPLIER); |
| stl_le_p(&id->lsa_size, cvc->get_lsa_size(ct3d)); |
| /* 256 poison records */ |
| st24_le_p(id->poison_list_max_mer, 256); |
| /* No limit - so limited by main poison record limit */ |
| stw_le_p(&id->inject_poison_limit, 0); |
| stw_le_p(&id->dc_event_log_size, CXL_DC_EVENT_LOG_SIZE); |
| |
| *len_out = sizeof(*id); |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 Section 8.2.9.9.2.1: Get Partition Info (Opcode 4100h) */ |
| static CXLRetCode cmd_ccls_get_partition_info(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLDeviceState *cxl_dstate = &CXL_TYPE3(cci->d)->cxl_dstate; |
| struct { |
| uint64_t active_vmem; |
| uint64_t active_pmem; |
| uint64_t next_vmem; |
| uint64_t next_pmem; |
| } QEMU_PACKED *part_info = (void *)payload_out; |
| QEMU_BUILD_BUG_ON(sizeof(*part_info) != 0x20); |
| CXLType3Dev *ct3d = container_of(cxl_dstate, CXLType3Dev, cxl_dstate); |
| |
| if ((!QEMU_IS_ALIGNED(cxl_dstate->vmem_size, CXL_CAPACITY_MULTIPLIER)) || |
| (!QEMU_IS_ALIGNED(cxl_dstate->pmem_size, CXL_CAPACITY_MULTIPLIER)) || |
| (!QEMU_IS_ALIGNED(ct3d->dc.total_capacity, CXL_CAPACITY_MULTIPLIER))) { |
| return CXL_MBOX_INTERNAL_ERROR; |
| } |
| |
| stq_le_p(&part_info->active_vmem, |
| cxl_dstate->vmem_size / CXL_CAPACITY_MULTIPLIER); |
| /* |
| * When both next_vmem and next_pmem are 0, there is no pending change to |
| * partitioning. |
| */ |
| stq_le_p(&part_info->next_vmem, 0); |
| stq_le_p(&part_info->active_pmem, |
| cxl_dstate->pmem_size / CXL_CAPACITY_MULTIPLIER); |
| stq_le_p(&part_info->next_pmem, 0); |
| |
| *len_out = sizeof(*part_info); |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 Section 8.2.9.9.2.3: Get LSA (Opcode 4102h) */ |
| static CXLRetCode cmd_ccls_get_lsa(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| struct { |
| uint32_t offset; |
| uint32_t length; |
| } QEMU_PACKED *get_lsa; |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| CXLType3Class *cvc = CXL_TYPE3_GET_CLASS(ct3d); |
| uint64_t offset, length; |
| |
| get_lsa = (void *)payload_in; |
| offset = get_lsa->offset; |
| length = get_lsa->length; |
| |
| if (offset + length > cvc->get_lsa_size(ct3d)) { |
| *len_out = 0; |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| *len_out = cvc->get_lsa(ct3d, payload_out, length, offset); |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 Section 8.2.9.9.2.4: Set LSA (Opcode 4103h) */ |
| static CXLRetCode cmd_ccls_set_lsa(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| struct set_lsa_pl { |
| uint32_t offset; |
| uint32_t rsvd; |
| uint8_t data[]; |
| } QEMU_PACKED; |
| struct set_lsa_pl *set_lsa_payload = (void *)payload_in; |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| CXLType3Class *cvc = CXL_TYPE3_GET_CLASS(ct3d); |
| const size_t hdr_len = offsetof(struct set_lsa_pl, data); |
| |
| *len_out = 0; |
| if (!len_in) { |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| if (set_lsa_payload->offset + len_in > cvc->get_lsa_size(ct3d) + hdr_len) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| len_in -= hdr_len; |
| |
| cvc->set_lsa(ct3d, set_lsa_payload->data, len_in, set_lsa_payload->offset); |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* Perform the actual device zeroing */ |
| static void __do_sanitization(CXLType3Dev *ct3d) |
| { |
| MemoryRegion *mr; |
| |
| if (ct3d->hostvmem) { |
| mr = host_memory_backend_get_memory(ct3d->hostvmem); |
| if (mr) { |
| void *hostmem = memory_region_get_ram_ptr(mr); |
| memset(hostmem, 0, memory_region_size(mr)); |
| } |
| } |
| |
| if (ct3d->hostpmem) { |
| mr = host_memory_backend_get_memory(ct3d->hostpmem); |
| if (mr) { |
| void *hostmem = memory_region_get_ram_ptr(mr); |
| memset(hostmem, 0, memory_region_size(mr)); |
| } |
| } |
| if (ct3d->lsa) { |
| mr = host_memory_backend_get_memory(ct3d->lsa); |
| if (mr) { |
| void *lsa = memory_region_get_ram_ptr(mr); |
| memset(lsa, 0, memory_region_size(mr)); |
| } |
| } |
| cxl_discard_all_event_records(&ct3d->cxl_dstate); |
| } |
| |
| /* |
| * CXL r3.1 Section 8.2.9.9.5.1: Sanitize (Opcode 4400h) |
| * |
| * Once the Sanitize command has started successfully, the device shall be |
| * placed in the media disabled state. If the command fails or is interrupted |
| * by a reset or power failure, it shall remain in the media disabled state |
| * until a successful Sanitize command has been completed. During this state: |
| * |
| * 1. Memory writes to the device will have no effect, and all memory reads |
| * will return random values (no user data returned, even for locations that |
| * the failed Sanitize operation didn’t sanitize yet). |
| * |
| * 2. Mailbox commands shall still be processed in the disabled state, except |
| * that commands that access Sanitized areas shall fail with the Media Disabled |
| * error code. |
| */ |
| static CXLRetCode cmd_sanitize_overwrite(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| uint64_t total_mem; /* in Mb */ |
| int secs; |
| |
| total_mem = (ct3d->cxl_dstate.vmem_size + ct3d->cxl_dstate.pmem_size) >> 20; |
| if (total_mem <= 512) { |
| secs = 4; |
| } else if (total_mem <= 1024) { |
| secs = 8; |
| } else if (total_mem <= 2 * 1024) { |
| secs = 15; |
| } else if (total_mem <= 4 * 1024) { |
| secs = 30; |
| } else if (total_mem <= 8 * 1024) { |
| secs = 60; |
| } else if (total_mem <= 16 * 1024) { |
| secs = 2 * 60; |
| } else if (total_mem <= 32 * 1024) { |
| secs = 4 * 60; |
| } else if (total_mem <= 64 * 1024) { |
| secs = 8 * 60; |
| } else if (total_mem <= 128 * 1024) { |
| secs = 15 * 60; |
| } else if (total_mem <= 256 * 1024) { |
| secs = 30 * 60; |
| } else if (total_mem <= 512 * 1024) { |
| secs = 60 * 60; |
| } else if (total_mem <= 1024 * 1024) { |
| secs = 120 * 60; |
| } else { |
| secs = 240 * 60; /* max 4 hrs */ |
| } |
| |
| /* EBUSY other bg cmds as of now */ |
| cci->bg.runtime = secs * 1000UL; |
| *len_out = 0; |
| |
| cxl_dev_disable_media(&ct3d->cxl_dstate); |
| |
| /* sanitize when done */ |
| return CXL_MBOX_BG_STARTED; |
| } |
| |
| static CXLRetCode cmd_get_security_state(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| uint32_t *state = (uint32_t *)payload_out; |
| |
| *state = 0; |
| *len_out = 4; |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* |
| * CXL r3.1 Section 8.2.9.9.4.1: Get Poison List (Opcode 4300h) |
| * |
| * This is very inefficient, but good enough for now! |
| * Also the payload will always fit, so no need to handle the MORE flag and |
| * make this stateful. We may want to allow longer poison lists to aid |
| * testing that kernel functionality. |
| */ |
| static CXLRetCode cmd_media_get_poison_list(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| struct get_poison_list_pl { |
| uint64_t pa; |
| uint64_t length; |
| } QEMU_PACKED; |
| |
| struct get_poison_list_out_pl { |
| uint8_t flags; |
| uint8_t rsvd1; |
| uint64_t overflow_timestamp; |
| uint16_t count; |
| uint8_t rsvd2[0x14]; |
| struct { |
| uint64_t addr; |
| uint32_t length; |
| uint32_t resv; |
| } QEMU_PACKED records[]; |
| } QEMU_PACKED; |
| |
| struct get_poison_list_pl *in = (void *)payload_in; |
| struct get_poison_list_out_pl *out = (void *)payload_out; |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| uint16_t record_count = 0, i = 0; |
| uint64_t query_start, query_length; |
| CXLPoisonList *poison_list = &ct3d->poison_list; |
| CXLPoison *ent; |
| uint16_t out_pl_len; |
| |
| query_start = ldq_le_p(&in->pa); |
| /* 64 byte alignment required */ |
| if (query_start & 0x3f) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| query_length = ldq_le_p(&in->length) * CXL_CACHE_LINE_SIZE; |
| |
| QLIST_FOREACH(ent, poison_list, node) { |
| /* Check for no overlap */ |
| if (!ranges_overlap(ent->start, ent->length, |
| query_start, query_length)) { |
| continue; |
| } |
| record_count++; |
| } |
| out_pl_len = sizeof(*out) + record_count * sizeof(out->records[0]); |
| assert(out_pl_len <= CXL_MAILBOX_MAX_PAYLOAD_SIZE); |
| |
| QLIST_FOREACH(ent, poison_list, node) { |
| uint64_t start, stop; |
| |
| /* Check for no overlap */ |
| if (!ranges_overlap(ent->start, ent->length, |
| query_start, query_length)) { |
| continue; |
| } |
| |
| /* Deal with overlap */ |
| start = MAX(ROUND_DOWN(ent->start, 64ull), query_start); |
| stop = MIN(ROUND_DOWN(ent->start, 64ull) + ent->length, |
| query_start + query_length); |
| stq_le_p(&out->records[i].addr, start | (ent->type & 0x7)); |
| stl_le_p(&out->records[i].length, (stop - start) / CXL_CACHE_LINE_SIZE); |
| i++; |
| } |
| if (ct3d->poison_list_overflowed) { |
| out->flags = (1 << 1); |
| stq_le_p(&out->overflow_timestamp, ct3d->poison_list_overflow_ts); |
| } |
| if (scan_media_running(cci)) { |
| out->flags |= (1 << 2); |
| } |
| |
| stw_le_p(&out->count, record_count); |
| *len_out = out_pl_len; |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 Section 8.2.9.9.4.2: Inject Poison (Opcode 4301h) */ |
| static CXLRetCode cmd_media_inject_poison(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| CXLPoisonList *poison_list = &ct3d->poison_list; |
| CXLPoison *ent; |
| struct inject_poison_pl { |
| uint64_t dpa; |
| }; |
| struct inject_poison_pl *in = (void *)payload_in; |
| uint64_t dpa = ldq_le_p(&in->dpa); |
| CXLPoison *p; |
| |
| QLIST_FOREACH(ent, poison_list, node) { |
| if (dpa >= ent->start && |
| dpa + CXL_CACHE_LINE_SIZE <= ent->start + ent->length) { |
| return CXL_MBOX_SUCCESS; |
| } |
| } |
| /* |
| * Freeze the list if there is an on-going scan media operation. |
| */ |
| if (scan_media_running(cci)) { |
| /* |
| * XXX: Spec is ambiguous - is this case considered |
| * a successful return despite not adding to the list? |
| */ |
| goto success; |
| } |
| |
| if (ct3d->poison_list_cnt == CXL_POISON_LIST_LIMIT) { |
| return CXL_MBOX_INJECT_POISON_LIMIT; |
| } |
| p = g_new0(CXLPoison, 1); |
| |
| p->length = CXL_CACHE_LINE_SIZE; |
| p->start = dpa; |
| p->type = CXL_POISON_TYPE_INJECTED; |
| |
| /* |
| * Possible todo: Merge with existing entry if next to it and if same type |
| */ |
| QLIST_INSERT_HEAD(poison_list, p, node); |
| ct3d->poison_list_cnt++; |
| success: |
| *len_out = 0; |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* CXL r3.1 Section 8.2.9.9.4.3: Clear Poison (Opcode 4302h */ |
| static CXLRetCode cmd_media_clear_poison(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| CXLDeviceState *cxl_dstate = &ct3d->cxl_dstate; |
| CXLPoisonList *poison_list = &ct3d->poison_list; |
| CXLType3Class *cvc = CXL_TYPE3_GET_CLASS(ct3d); |
| struct clear_poison_pl { |
| uint64_t dpa; |
| uint8_t data[64]; |
| }; |
| CXLPoison *ent; |
| uint64_t dpa; |
| |
| struct clear_poison_pl *in = (void *)payload_in; |
| |
| dpa = ldq_le_p(&in->dpa); |
| if (dpa + CXL_CACHE_LINE_SIZE > cxl_dstate->static_mem_size + |
| ct3d->dc.total_capacity) { |
| return CXL_MBOX_INVALID_PA; |
| } |
| |
| /* Clearing a region with no poison is not an error so always do so */ |
| if (cvc->set_cacheline) { |
| if (!cvc->set_cacheline(ct3d, dpa, in->data)) { |
| return CXL_MBOX_INTERNAL_ERROR; |
| } |
| } |
| |
| /* |
| * Freeze the list if there is an on-going scan media operation. |
| */ |
| if (scan_media_running(cci)) { |
| /* |
| * XXX: Spec is ambiguous - is this case considered |
| * a successful return despite not removing from the list? |
| */ |
| goto success; |
| } |
| |
| QLIST_FOREACH(ent, poison_list, node) { |
| /* |
| * Test for contained in entry. Simpler than general case |
| * as clearing 64 bytes and entries 64 byte aligned |
| */ |
| if ((dpa >= ent->start) && (dpa < ent->start + ent->length)) { |
| break; |
| } |
| } |
| if (!ent) { |
| goto success; |
| } |
| |
| QLIST_REMOVE(ent, node); |
| ct3d->poison_list_cnt--; |
| |
| if (dpa > ent->start) { |
| CXLPoison *frag; |
| /* Cannot overflow as replacing existing entry */ |
| |
| frag = g_new0(CXLPoison, 1); |
| |
| frag->start = ent->start; |
| frag->length = dpa - ent->start; |
| frag->type = ent->type; |
| |
| QLIST_INSERT_HEAD(poison_list, frag, node); |
| ct3d->poison_list_cnt++; |
| } |
| |
| if (dpa + CXL_CACHE_LINE_SIZE < ent->start + ent->length) { |
| CXLPoison *frag; |
| |
| if (ct3d->poison_list_cnt == CXL_POISON_LIST_LIMIT) { |
| cxl_set_poison_list_overflowed(ct3d); |
| } else { |
| frag = g_new0(CXLPoison, 1); |
| |
| frag->start = dpa + CXL_CACHE_LINE_SIZE; |
| frag->length = ent->start + ent->length - frag->start; |
| frag->type = ent->type; |
| QLIST_INSERT_HEAD(poison_list, frag, node); |
| ct3d->poison_list_cnt++; |
| } |
| } |
| /* Any fragments have been added, free original entry */ |
| g_free(ent); |
| success: |
| *len_out = 0; |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* |
| * CXL r3.1 section 8.2.9.9.4.4: Get Scan Media Capabilities |
| */ |
| static CXLRetCode |
| cmd_media_get_scan_media_capabilities(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| struct get_scan_media_capabilities_pl { |
| uint64_t pa; |
| uint64_t length; |
| } QEMU_PACKED; |
| |
| struct get_scan_media_capabilities_out_pl { |
| uint32_t estimated_runtime_ms; |
| }; |
| |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| CXLDeviceState *cxl_dstate = &ct3d->cxl_dstate; |
| struct get_scan_media_capabilities_pl *in = (void *)payload_in; |
| struct get_scan_media_capabilities_out_pl *out = (void *)payload_out; |
| uint64_t query_start; |
| uint64_t query_length; |
| |
| query_start = ldq_le_p(&in->pa); |
| /* 64 byte alignment required */ |
| if (query_start & 0x3f) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| query_length = ldq_le_p(&in->length) * CXL_CACHE_LINE_SIZE; |
| |
| if (query_start + query_length > cxl_dstate->static_mem_size) { |
| return CXL_MBOX_INVALID_PA; |
| } |
| |
| /* |
| * Just use 400 nanosecond access/read latency + 100 ns for |
| * the cost of updating the poison list. For small enough |
| * chunks return at least 1 ms. |
| */ |
| stl_le_p(&out->estimated_runtime_ms, |
| MAX(1, query_length * (0.0005L / 64))); |
| |
| *len_out = sizeof(*out); |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| static void __do_scan_media(CXLType3Dev *ct3d) |
| { |
| CXLPoison *ent; |
| unsigned int results_cnt = 0; |
| |
| QLIST_FOREACH(ent, &ct3d->scan_media_results, node) { |
| results_cnt++; |
| } |
| |
| /* only scan media may clear the overflow */ |
| if (ct3d->poison_list_overflowed && |
| ct3d->poison_list_cnt == results_cnt) { |
| cxl_clear_poison_list_overflowed(ct3d); |
| } |
| /* scan media has run since last conventional reset */ |
| ct3d->scan_media_hasrun = true; |
| } |
| |
| /* |
| * CXL r3.1 section 8.2.9.9.4.5: Scan Media |
| */ |
| static CXLRetCode cmd_media_scan_media(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| struct scan_media_pl { |
| uint64_t pa; |
| uint64_t length; |
| uint8_t flags; |
| } QEMU_PACKED; |
| |
| struct scan_media_pl *in = (void *)payload_in; |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| CXLDeviceState *cxl_dstate = &ct3d->cxl_dstate; |
| uint64_t query_start; |
| uint64_t query_length; |
| CXLPoison *ent, *next; |
| |
| query_start = ldq_le_p(&in->pa); |
| /* 64 byte alignment required */ |
| if (query_start & 0x3f) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| query_length = ldq_le_p(&in->length) * CXL_CACHE_LINE_SIZE; |
| |
| if (query_start + query_length > cxl_dstate->static_mem_size) { |
| return CXL_MBOX_INVALID_PA; |
| } |
| if (ct3d->dc.num_regions && query_start + query_length >= |
| cxl_dstate->static_mem_size + ct3d->dc.total_capacity) { |
| return CXL_MBOX_INVALID_PA; |
| } |
| |
| if (in->flags == 0) { /* TODO */ |
| qemu_log_mask(LOG_UNIMP, |
| "Scan Media Event Log is unsupported\n"); |
| } |
| |
| /* any previous results are discarded upon a new Scan Media */ |
| QLIST_FOREACH_SAFE(ent, &ct3d->scan_media_results, node, next) { |
| QLIST_REMOVE(ent, node); |
| g_free(ent); |
| } |
| |
| /* kill the poison list - it will be recreated */ |
| if (ct3d->poison_list_overflowed) { |
| QLIST_FOREACH_SAFE(ent, &ct3d->poison_list, node, next) { |
| QLIST_REMOVE(ent, node); |
| g_free(ent); |
| ct3d->poison_list_cnt--; |
| } |
| } |
| |
| /* |
| * Scan the backup list and move corresponding entries |
| * into the results list, updating the poison list |
| * when possible. |
| */ |
| QLIST_FOREACH_SAFE(ent, &ct3d->poison_list_bkp, node, next) { |
| CXLPoison *res; |
| |
| if (ent->start >= query_start + query_length || |
| ent->start + ent->length <= query_start) { |
| continue; |
| } |
| |
| /* |
| * If a Get Poison List cmd comes in while this |
| * scan is being done, it will see the new complete |
| * list, while setting the respective flag. |
| */ |
| if (ct3d->poison_list_cnt < CXL_POISON_LIST_LIMIT) { |
| CXLPoison *p = g_new0(CXLPoison, 1); |
| |
| p->start = ent->start; |
| p->length = ent->length; |
| p->type = ent->type; |
| QLIST_INSERT_HEAD(&ct3d->poison_list, p, node); |
| ct3d->poison_list_cnt++; |
| } |
| |
| res = g_new0(CXLPoison, 1); |
| res->start = ent->start; |
| res->length = ent->length; |
| res->type = ent->type; |
| QLIST_INSERT_HEAD(&ct3d->scan_media_results, res, node); |
| |
| QLIST_REMOVE(ent, node); |
| g_free(ent); |
| } |
| |
| cci->bg.runtime = MAX(1, query_length * (0.0005L / 64)); |
| *len_out = 0; |
| |
| return CXL_MBOX_BG_STARTED; |
| } |
| |
| /* |
| * CXL r3.1 section 8.2.9.9.4.6: Get Scan Media Results |
| */ |
| static CXLRetCode cmd_media_get_scan_media_results(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| struct get_scan_media_results_out_pl { |
| uint64_t dpa_restart; |
| uint64_t length; |
| uint8_t flags; |
| uint8_t rsvd1; |
| uint16_t count; |
| uint8_t rsvd2[0xc]; |
| struct { |
| uint64_t addr; |
| uint32_t length; |
| uint32_t resv; |
| } QEMU_PACKED records[]; |
| } QEMU_PACKED; |
| |
| struct get_scan_media_results_out_pl *out = (void *)payload_out; |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| CXLPoisonList *scan_media_results = &ct3d->scan_media_results; |
| CXLPoison *ent, *next; |
| uint16_t total_count = 0, record_count = 0, i = 0; |
| uint16_t out_pl_len; |
| |
| if (!ct3d->scan_media_hasrun) { |
| return CXL_MBOX_UNSUPPORTED; |
| } |
| |
| /* |
| * Calculate limits, all entries are within the same address range of the |
| * last scan media call. |
| */ |
| QLIST_FOREACH(ent, scan_media_results, node) { |
| size_t rec_size = record_count * sizeof(out->records[0]); |
| |
| if (sizeof(*out) + rec_size < CXL_MAILBOX_MAX_PAYLOAD_SIZE) { |
| record_count++; |
| } |
| total_count++; |
| } |
| |
| out_pl_len = sizeof(*out) + record_count * sizeof(out->records[0]); |
| assert(out_pl_len <= CXL_MAILBOX_MAX_PAYLOAD_SIZE); |
| |
| memset(out, 0, out_pl_len); |
| QLIST_FOREACH_SAFE(ent, scan_media_results, node, next) { |
| uint64_t start, stop; |
| |
| if (i == record_count) { |
| break; |
| } |
| |
| start = ROUND_DOWN(ent->start, 64ull); |
| stop = ROUND_DOWN(ent->start, 64ull) + ent->length; |
| stq_le_p(&out->records[i].addr, start); |
| stl_le_p(&out->records[i].length, (stop - start) / CXL_CACHE_LINE_SIZE); |
| i++; |
| |
| /* consume the returning entry */ |
| QLIST_REMOVE(ent, node); |
| g_free(ent); |
| } |
| |
| stw_le_p(&out->count, record_count); |
| if (total_count > record_count) { |
| out->flags = (1 << 0); /* More Media Error Records */ |
| } |
| |
| *len_out = out_pl_len; |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* |
| * CXL r3.1 section 8.2.9.9.9.1: Get Dynamic Capacity Configuration |
| * (Opcode: 4800h) |
| */ |
| static CXLRetCode cmd_dcd_get_dyn_cap_config(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| struct { |
| uint8_t region_cnt; |
| uint8_t start_rid; |
| } QEMU_PACKED *in = (void *)payload_in; |
| struct { |
| uint8_t num_regions; |
| uint8_t regions_returned; |
| uint8_t rsvd1[6]; |
| struct { |
| uint64_t base; |
| uint64_t decode_len; |
| uint64_t region_len; |
| uint64_t block_size; |
| uint32_t dsmadhandle; |
| uint8_t flags; |
| uint8_t rsvd2[3]; |
| } QEMU_PACKED records[]; |
| } QEMU_PACKED *out = (void *)payload_out; |
| struct { |
| uint32_t num_extents_supported; |
| uint32_t num_extents_available; |
| uint32_t num_tags_supported; |
| uint32_t num_tags_available; |
| } QEMU_PACKED *extra_out; |
| uint16_t record_count; |
| uint16_t i; |
| uint16_t out_pl_len; |
| uint8_t start_rid; |
| |
| start_rid = in->start_rid; |
| if (start_rid >= ct3d->dc.num_regions) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| record_count = MIN(ct3d->dc.num_regions - in->start_rid, in->region_cnt); |
| |
| out_pl_len = sizeof(*out) + record_count * sizeof(out->records[0]); |
| extra_out = (void *)(payload_out + out_pl_len); |
| out_pl_len += sizeof(*extra_out); |
| assert(out_pl_len <= CXL_MAILBOX_MAX_PAYLOAD_SIZE); |
| |
| out->num_regions = ct3d->dc.num_regions; |
| out->regions_returned = record_count; |
| for (i = 0; i < record_count; i++) { |
| stq_le_p(&out->records[i].base, |
| ct3d->dc.regions[start_rid + i].base); |
| stq_le_p(&out->records[i].decode_len, |
| ct3d->dc.regions[start_rid + i].decode_len / |
| CXL_CAPACITY_MULTIPLIER); |
| stq_le_p(&out->records[i].region_len, |
| ct3d->dc.regions[start_rid + i].len); |
| stq_le_p(&out->records[i].block_size, |
| ct3d->dc.regions[start_rid + i].block_size); |
| stl_le_p(&out->records[i].dsmadhandle, |
| ct3d->dc.regions[start_rid + i].dsmadhandle); |
| out->records[i].flags = ct3d->dc.regions[start_rid + i].flags; |
| } |
| /* |
| * TODO: Assign values once extents and tags are introduced |
| * to use. |
| */ |
| stl_le_p(&extra_out->num_extents_supported, CXL_NUM_EXTENTS_SUPPORTED); |
| stl_le_p(&extra_out->num_extents_available, CXL_NUM_EXTENTS_SUPPORTED - |
| ct3d->dc.total_extent_count); |
| stl_le_p(&extra_out->num_tags_supported, CXL_NUM_TAGS_SUPPORTED); |
| stl_le_p(&extra_out->num_tags_available, CXL_NUM_TAGS_SUPPORTED); |
| |
| *len_out = out_pl_len; |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* |
| * CXL r3.1 section 8.2.9.9.9.2: |
| * Get Dynamic Capacity Extent List (Opcode 4801h) |
| */ |
| static CXLRetCode cmd_dcd_get_dyn_cap_ext_list(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| struct { |
| uint32_t extent_cnt; |
| uint32_t start_extent_id; |
| } QEMU_PACKED *in = (void *)payload_in; |
| struct { |
| uint32_t count; |
| uint32_t total_extents; |
| uint32_t generation_num; |
| uint8_t rsvd[4]; |
| CXLDCExtentRaw records[]; |
| } QEMU_PACKED *out = (void *)payload_out; |
| uint32_t start_extent_id = in->start_extent_id; |
| CXLDCExtentList *extent_list = &ct3d->dc.extents; |
| uint16_t record_count = 0, i = 0, record_done = 0; |
| uint16_t out_pl_len, size; |
| CXLDCExtent *ent; |
| |
| if (start_extent_id > ct3d->dc.total_extent_count) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| record_count = MIN(in->extent_cnt, |
| ct3d->dc.total_extent_count - start_extent_id); |
| size = CXL_MAILBOX_MAX_PAYLOAD_SIZE - sizeof(*out); |
| record_count = MIN(record_count, size / sizeof(out->records[0])); |
| out_pl_len = sizeof(*out) + record_count * sizeof(out->records[0]); |
| |
| stl_le_p(&out->count, record_count); |
| stl_le_p(&out->total_extents, ct3d->dc.total_extent_count); |
| stl_le_p(&out->generation_num, ct3d->dc.ext_list_gen_seq); |
| |
| if (record_count > 0) { |
| CXLDCExtentRaw *out_rec = &out->records[record_done]; |
| |
| QTAILQ_FOREACH(ent, extent_list, node) { |
| if (i++ < start_extent_id) { |
| continue; |
| } |
| stq_le_p(&out_rec->start_dpa, ent->start_dpa); |
| stq_le_p(&out_rec->len, ent->len); |
| memcpy(&out_rec->tag, ent->tag, 0x10); |
| stw_le_p(&out_rec->shared_seq, ent->shared_seq); |
| |
| record_done++; |
| out_rec++; |
| if (record_done == record_count) { |
| break; |
| } |
| } |
| } |
| |
| *len_out = out_pl_len; |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* |
| * Check whether any bit between addr[nr, nr+size) is set, |
| * return true if any bit is set, otherwise return false |
| */ |
| bool test_any_bits_set(const unsigned long *addr, unsigned long nr, |
| unsigned long size) |
| { |
| unsigned long res = find_next_bit(addr, size + nr, nr); |
| |
| return res < nr + size; |
| } |
| |
| CXLDCRegion *cxl_find_dc_region(CXLType3Dev *ct3d, uint64_t dpa, uint64_t len) |
| { |
| int i; |
| CXLDCRegion *region = &ct3d->dc.regions[0]; |
| |
| if (dpa < region->base || |
| dpa >= region->base + ct3d->dc.total_capacity) { |
| return NULL; |
| } |
| |
| /* |
| * CXL r3.1 section 9.13.3: Dynamic Capacity Device (DCD) |
| * |
| * Regions are used in increasing-DPA order, with Region 0 being used for |
| * the lowest DPA of Dynamic Capacity and Region 7 for the highest DPA. |
| * So check from the last region to find where the dpa belongs. Extents that |
| * cross multiple regions are not allowed. |
| */ |
| for (i = ct3d->dc.num_regions - 1; i >= 0; i--) { |
| region = &ct3d->dc.regions[i]; |
| if (dpa >= region->base) { |
| if (dpa + len > region->base + region->len) { |
| return NULL; |
| } |
| return region; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| void cxl_insert_extent_to_extent_list(CXLDCExtentList *list, |
| uint64_t dpa, |
| uint64_t len, |
| uint8_t *tag, |
| uint16_t shared_seq) |
| { |
| CXLDCExtent *extent; |
| |
| extent = g_new0(CXLDCExtent, 1); |
| extent->start_dpa = dpa; |
| extent->len = len; |
| if (tag) { |
| memcpy(extent->tag, tag, 0x10); |
| } |
| extent->shared_seq = shared_seq; |
| |
| QTAILQ_INSERT_TAIL(list, extent, node); |
| } |
| |
| void cxl_remove_extent_from_extent_list(CXLDCExtentList *list, |
| CXLDCExtent *extent) |
| { |
| QTAILQ_REMOVE(list, extent, node); |
| g_free(extent); |
| } |
| |
| /* |
| * Add a new extent to the extent "group" if group exists; |
| * otherwise, create a new group |
| * Return value: the extent group where the extent is inserted. |
| */ |
| CXLDCExtentGroup *cxl_insert_extent_to_extent_group(CXLDCExtentGroup *group, |
| uint64_t dpa, |
| uint64_t len, |
| uint8_t *tag, |
| uint16_t shared_seq) |
| { |
| if (!group) { |
| group = g_new0(CXLDCExtentGroup, 1); |
| QTAILQ_INIT(&group->list); |
| } |
| cxl_insert_extent_to_extent_list(&group->list, dpa, len, |
| tag, shared_seq); |
| return group; |
| } |
| |
| void cxl_extent_group_list_insert_tail(CXLDCExtentGroupList *list, |
| CXLDCExtentGroup *group) |
| { |
| QTAILQ_INSERT_TAIL(list, group, node); |
| } |
| |
| void cxl_extent_group_list_delete_front(CXLDCExtentGroupList *list) |
| { |
| CXLDCExtent *ent, *ent_next; |
| CXLDCExtentGroup *group = QTAILQ_FIRST(list); |
| |
| QTAILQ_REMOVE(list, group, node); |
| QTAILQ_FOREACH_SAFE(ent, &group->list, node, ent_next) { |
| cxl_remove_extent_from_extent_list(&group->list, ent); |
| } |
| g_free(group); |
| } |
| |
| /* |
| * CXL r3.1 Table 8-168: Add Dynamic Capacity Response Input Payload |
| * CXL r3.1 Table 8-170: Release Dynamic Capacity Input Payload |
| */ |
| typedef struct CXLUpdateDCExtentListInPl { |
| uint32_t num_entries_updated; |
| uint8_t flags; |
| uint8_t rsvd[3]; |
| /* CXL r3.1 Table 8-169: Updated Extent */ |
| struct { |
| uint64_t start_dpa; |
| uint64_t len; |
| uint8_t rsvd[8]; |
| } QEMU_PACKED updated_entries[]; |
| } QEMU_PACKED CXLUpdateDCExtentListInPl; |
| |
| /* |
| * For the extents in the extent list to operate, check whether they are valid |
| * 1. The extent should be in the range of a valid DC region; |
| * 2. The extent should not cross multiple regions; |
| * 3. The start DPA and the length of the extent should align with the block |
| * size of the region; |
| * 4. The address range of multiple extents in the list should not overlap. |
| */ |
| static CXLRetCode cxl_detect_malformed_extent_list(CXLType3Dev *ct3d, |
| const CXLUpdateDCExtentListInPl *in) |
| { |
| uint64_t min_block_size = UINT64_MAX; |
| CXLDCRegion *region; |
| CXLDCRegion *lastregion = &ct3d->dc.regions[ct3d->dc.num_regions - 1]; |
| g_autofree unsigned long *blk_bitmap = NULL; |
| uint64_t dpa, len; |
| uint32_t i; |
| |
| for (i = 0; i < ct3d->dc.num_regions; i++) { |
| region = &ct3d->dc.regions[i]; |
| min_block_size = MIN(min_block_size, region->block_size); |
| } |
| |
| blk_bitmap = bitmap_new((lastregion->base + lastregion->len - |
| ct3d->dc.regions[0].base) / min_block_size); |
| |
| for (i = 0; i < in->num_entries_updated; i++) { |
| dpa = in->updated_entries[i].start_dpa; |
| len = in->updated_entries[i].len; |
| |
| region = cxl_find_dc_region(ct3d, dpa, len); |
| if (!region) { |
| return CXL_MBOX_INVALID_PA; |
| } |
| |
| dpa -= ct3d->dc.regions[0].base; |
| if (dpa % region->block_size || len % region->block_size) { |
| return CXL_MBOX_INVALID_EXTENT_LIST; |
| } |
| /* the dpa range already covered by some other extents in the list */ |
| if (test_any_bits_set(blk_bitmap, dpa / min_block_size, |
| len / min_block_size)) { |
| return CXL_MBOX_INVALID_EXTENT_LIST; |
| } |
| bitmap_set(blk_bitmap, dpa / min_block_size, len / min_block_size); |
| } |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| static CXLRetCode cxl_dcd_add_dyn_cap_rsp_dry_run(CXLType3Dev *ct3d, |
| const CXLUpdateDCExtentListInPl *in) |
| { |
| uint32_t i; |
| CXLDCExtent *ent; |
| CXLDCExtentGroup *ext_group; |
| uint64_t dpa, len; |
| Range range1, range2; |
| |
| for (i = 0; i < in->num_entries_updated; i++) { |
| dpa = in->updated_entries[i].start_dpa; |
| len = in->updated_entries[i].len; |
| |
| range_init_nofail(&range1, dpa, len); |
| |
| /* |
| * The host-accepted DPA range must be contained by the first extent |
| * group in the pending list |
| */ |
| ext_group = QTAILQ_FIRST(&ct3d->dc.extents_pending); |
| if (!cxl_extents_contains_dpa_range(&ext_group->list, dpa, len)) { |
| return CXL_MBOX_INVALID_PA; |
| } |
| |
| /* to-be-added range should not overlap with range already accepted */ |
| QTAILQ_FOREACH(ent, &ct3d->dc.extents, node) { |
| range_init_nofail(&range2, ent->start_dpa, ent->len); |
| if (range_overlaps_range(&range1, &range2)) { |
| return CXL_MBOX_INVALID_PA; |
| } |
| } |
| } |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* |
| * CXL r3.1 section 8.2.9.9.9.3: Add Dynamic Capacity Response (Opcode 4802h) |
| * An extent is added to the extent list and becomes usable only after the |
| * response is processed successfully. |
| */ |
| static CXLRetCode cmd_dcd_add_dyn_cap_rsp(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLUpdateDCExtentListInPl *in = (void *)payload_in; |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| CXLDCExtentList *extent_list = &ct3d->dc.extents; |
| uint32_t i; |
| uint64_t dpa, len; |
| CXLRetCode ret; |
| |
| if (len_in < sizeof(*in)) { |
| return CXL_MBOX_INVALID_PAYLOAD_LENGTH; |
| } |
| |
| if (in->num_entries_updated == 0) { |
| cxl_extent_group_list_delete_front(&ct3d->dc.extents_pending); |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| if (len_in < |
| sizeof(*in) + sizeof(*in->updated_entries) * in->num_entries_updated) { |
| return CXL_MBOX_INVALID_PAYLOAD_LENGTH; |
| } |
| |
| /* Adding extents causes exceeding device's extent tracking ability. */ |
| if (in->num_entries_updated + ct3d->dc.total_extent_count > |
| CXL_NUM_EXTENTS_SUPPORTED) { |
| return CXL_MBOX_RESOURCES_EXHAUSTED; |
| } |
| |
| ret = cxl_detect_malformed_extent_list(ct3d, in); |
| if (ret != CXL_MBOX_SUCCESS) { |
| return ret; |
| } |
| |
| ret = cxl_dcd_add_dyn_cap_rsp_dry_run(ct3d, in); |
| if (ret != CXL_MBOX_SUCCESS) { |
| return ret; |
| } |
| |
| for (i = 0; i < in->num_entries_updated; i++) { |
| dpa = in->updated_entries[i].start_dpa; |
| len = in->updated_entries[i].len; |
| |
| cxl_insert_extent_to_extent_list(extent_list, dpa, len, NULL, 0); |
| ct3d->dc.total_extent_count += 1; |
| ct3_set_region_block_backed(ct3d, dpa, len); |
| } |
| /* Remove the first extent group in the pending list */ |
| cxl_extent_group_list_delete_front(&ct3d->dc.extents_pending); |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| /* |
| * Copy extent list from src to dst |
| * Return value: number of extents copied |
| */ |
| static uint32_t copy_extent_list(CXLDCExtentList *dst, |
| const CXLDCExtentList *src) |
| { |
| uint32_t cnt = 0; |
| CXLDCExtent *ent; |
| |
| if (!dst || !src) { |
| return 0; |
| } |
| |
| QTAILQ_FOREACH(ent, src, node) { |
| cxl_insert_extent_to_extent_list(dst, ent->start_dpa, ent->len, |
| ent->tag, ent->shared_seq); |
| cnt++; |
| } |
| return cnt; |
| } |
| |
| static CXLRetCode cxl_dc_extent_release_dry_run(CXLType3Dev *ct3d, |
| const CXLUpdateDCExtentListInPl *in, CXLDCExtentList *updated_list, |
| uint32_t *updated_list_size) |
| { |
| CXLDCExtent *ent, *ent_next; |
| uint64_t dpa, len; |
| uint32_t i; |
| int cnt_delta = 0; |
| CXLRetCode ret = CXL_MBOX_SUCCESS; |
| |
| QTAILQ_INIT(updated_list); |
| copy_extent_list(updated_list, &ct3d->dc.extents); |
| |
| for (i = 0; i < in->num_entries_updated; i++) { |
| Range range; |
| |
| dpa = in->updated_entries[i].start_dpa; |
| len = in->updated_entries[i].len; |
| |
| /* Check if the DPA range is not fully backed with valid extents */ |
| if (!ct3_test_region_block_backed(ct3d, dpa, len)) { |
| ret = CXL_MBOX_INVALID_PA; |
| goto free_and_exit; |
| } |
| |
| /* After this point, extent overflow is the only error can happen */ |
| while (len > 0) { |
| QTAILQ_FOREACH(ent, updated_list, node) { |
| range_init_nofail(&range, ent->start_dpa, ent->len); |
| |
| if (range_contains(&range, dpa)) { |
| uint64_t len1, len2 = 0, len_done = 0; |
| uint64_t ent_start_dpa = ent->start_dpa; |
| uint64_t ent_len = ent->len; |
| |
| len1 = dpa - ent->start_dpa; |
| /* Found the extent or the subset of an existing extent */ |
| if (range_contains(&range, dpa + len - 1)) { |
| len2 = ent_start_dpa + ent_len - dpa - len; |
| } else { |
| dpa = ent_start_dpa + ent_len; |
| } |
| len_done = ent_len - len1 - len2; |
| |
| cxl_remove_extent_from_extent_list(updated_list, ent); |
| cnt_delta--; |
| |
| if (len1) { |
| cxl_insert_extent_to_extent_list(updated_list, |
| ent_start_dpa, |
| len1, NULL, 0); |
| cnt_delta++; |
| } |
| if (len2) { |
| cxl_insert_extent_to_extent_list(updated_list, |
| dpa + len, |
| len2, NULL, 0); |
| cnt_delta++; |
| } |
| |
| if (cnt_delta + ct3d->dc.total_extent_count > |
| CXL_NUM_EXTENTS_SUPPORTED) { |
| ret = CXL_MBOX_RESOURCES_EXHAUSTED; |
| goto free_and_exit; |
| } |
| |
| len -= len_done; |
| break; |
| } |
| } |
| } |
| } |
| free_and_exit: |
| if (ret != CXL_MBOX_SUCCESS) { |
| QTAILQ_FOREACH_SAFE(ent, updated_list, node, ent_next) { |
| cxl_remove_extent_from_extent_list(updated_list, ent); |
| } |
| *updated_list_size = 0; |
| } else { |
| *updated_list_size = ct3d->dc.total_extent_count + cnt_delta; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * CXL r3.1 section 8.2.9.9.9.4: Release Dynamic Capacity (Opcode 4803h) |
| */ |
| static CXLRetCode cmd_dcd_release_dyn_cap(const struct cxl_cmd *cmd, |
| uint8_t *payload_in, |
| size_t len_in, |
| uint8_t *payload_out, |
| size_t *len_out, |
| CXLCCI *cci) |
| { |
| CXLUpdateDCExtentListInPl *in = (void *)payload_in; |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| CXLDCExtentList updated_list; |
| CXLDCExtent *ent, *ent_next; |
| uint32_t updated_list_size; |
| CXLRetCode ret; |
| |
| if (len_in < sizeof(*in)) { |
| return CXL_MBOX_INVALID_PAYLOAD_LENGTH; |
| } |
| |
| if (in->num_entries_updated == 0) { |
| return CXL_MBOX_INVALID_INPUT; |
| } |
| |
| if (len_in < |
| sizeof(*in) + sizeof(*in->updated_entries) * in->num_entries_updated) { |
| return CXL_MBOX_INVALID_PAYLOAD_LENGTH; |
| } |
| |
| ret = cxl_detect_malformed_extent_list(ct3d, in); |
| if (ret != CXL_MBOX_SUCCESS) { |
| return ret; |
| } |
| |
| ret = cxl_dc_extent_release_dry_run(ct3d, in, &updated_list, |
| &updated_list_size); |
| if (ret != CXL_MBOX_SUCCESS) { |
| return ret; |
| } |
| |
| /* |
| * If the dry run release passes, the returned updated_list will |
| * be the updated extent list and we just need to clear the extents |
| * in the accepted list and copy extents in the updated_list to accepted |
| * list and update the extent count; |
| */ |
| QTAILQ_FOREACH_SAFE(ent, &ct3d->dc.extents, node, ent_next) { |
| ct3_clear_region_block_backed(ct3d, ent->start_dpa, ent->len); |
| cxl_remove_extent_from_extent_list(&ct3d->dc.extents, ent); |
| } |
| copy_extent_list(&ct3d->dc.extents, &updated_list); |
| QTAILQ_FOREACH_SAFE(ent, &updated_list, node, ent_next) { |
| ct3_set_region_block_backed(ct3d, ent->start_dpa, ent->len); |
| cxl_remove_extent_from_extent_list(&updated_list, ent); |
| } |
| ct3d->dc.total_extent_count = updated_list_size; |
| |
| return CXL_MBOX_SUCCESS; |
| } |
| |
| static const struct cxl_cmd cxl_cmd_set[256][256] = { |
| [EVENTS][GET_RECORDS] = { "EVENTS_GET_RECORDS", |
| cmd_events_get_records, 1, 0 }, |
| [EVENTS][CLEAR_RECORDS] = { "EVENTS_CLEAR_RECORDS", |
| cmd_events_clear_records, ~0, CXL_MBOX_IMMEDIATE_LOG_CHANGE }, |
| [EVENTS][GET_INTERRUPT_POLICY] = { "EVENTS_GET_INTERRUPT_POLICY", |
| cmd_events_get_interrupt_policy, 0, 0 }, |
| [EVENTS][SET_INTERRUPT_POLICY] = { "EVENTS_SET_INTERRUPT_POLICY", |
| cmd_events_set_interrupt_policy, |
| ~0, CXL_MBOX_IMMEDIATE_CONFIG_CHANGE }, |
| [FIRMWARE_UPDATE][GET_INFO] = { "FIRMWARE_UPDATE_GET_INFO", |
| cmd_firmware_update_get_info, 0, 0 }, |
| [FIRMWARE_UPDATE][TRANSFER] = { "FIRMWARE_UPDATE_TRANSFER", |
| cmd_firmware_update_transfer, ~0, CXL_MBOX_BACKGROUND_OPERATION }, |
| [FIRMWARE_UPDATE][ACTIVATE] = { "FIRMWARE_UPDATE_ACTIVATE", |
| cmd_firmware_update_activate, 2, CXL_MBOX_BACKGROUND_OPERATION }, |
| [TIMESTAMP][GET] = { "TIMESTAMP_GET", cmd_timestamp_get, 0, 0 }, |
| [TIMESTAMP][SET] = { "TIMESTAMP_SET", cmd_timestamp_set, |
| 8, CXL_MBOX_IMMEDIATE_POLICY_CHANGE }, |
| [LOGS][GET_SUPPORTED] = { "LOGS_GET_SUPPORTED", cmd_logs_get_supported, |
| 0, 0 }, |
| [LOGS][GET_LOG] = { "LOGS_GET_LOG", cmd_logs_get_log, 0x18, 0 }, |
| [FEATURES][GET_SUPPORTED] = { "FEATURES_GET_SUPPORTED", |
| cmd_features_get_supported, 0x8, 0 }, |
| [FEATURES][GET_FEATURE] = { "FEATURES_GET_FEATURE", |
| cmd_features_get_feature, 0x15, 0 }, |
| [FEATURES][SET_FEATURE] = { "FEATURES_SET_FEATURE", |
| cmd_features_set_feature, |
| ~0, |
| (CXL_MBOX_IMMEDIATE_CONFIG_CHANGE | |
| CXL_MBOX_IMMEDIATE_DATA_CHANGE | |
| CXL_MBOX_IMMEDIATE_POLICY_CHANGE | |
| CXL_MBOX_IMMEDIATE_LOG_CHANGE | |
| CXL_MBOX_SECURITY_STATE_CHANGE)}, |
| [IDENTIFY][MEMORY_DEVICE] = { "IDENTIFY_MEMORY_DEVICE", |
| cmd_identify_memory_device, 0, 0 }, |
| [CCLS][GET_PARTITION_INFO] = { "CCLS_GET_PARTITION_INFO", |
| cmd_ccls_get_partition_info, 0, 0 }, |
| [CCLS][GET_LSA] = { "CCLS_GET_LSA", cmd_ccls_get_lsa, 8, 0 }, |
| [CCLS][SET_LSA] = { "CCLS_SET_LSA", cmd_ccls_set_lsa, |
| ~0, CXL_MBOX_IMMEDIATE_CONFIG_CHANGE | CXL_MBOX_IMMEDIATE_DATA_CHANGE }, |
| [SANITIZE][OVERWRITE] = { "SANITIZE_OVERWRITE", cmd_sanitize_overwrite, 0, |
| (CXL_MBOX_IMMEDIATE_DATA_CHANGE | |
| CXL_MBOX_SECURITY_STATE_CHANGE | |
| CXL_MBOX_BACKGROUND_OPERATION)}, |
| [PERSISTENT_MEM][GET_SECURITY_STATE] = { "GET_SECURITY_STATE", |
| cmd_get_security_state, 0, 0 }, |
| [MEDIA_AND_POISON][GET_POISON_LIST] = { "MEDIA_AND_POISON_GET_POISON_LIST", |
| cmd_media_get_poison_list, 16, 0 }, |
| [MEDIA_AND_POISON][INJECT_POISON] = { "MEDIA_AND_POISON_INJECT_POISON", |
| cmd_media_inject_poison, 8, 0 }, |
| [MEDIA_AND_POISON][CLEAR_POISON] = { "MEDIA_AND_POISON_CLEAR_POISON", |
| cmd_media_clear_poison, 72, 0 }, |
| [MEDIA_AND_POISON][GET_SCAN_MEDIA_CAPABILITIES] = { |
| "MEDIA_AND_POISON_GET_SCAN_MEDIA_CAPABILITIES", |
| cmd_media_get_scan_media_capabilities, 16, 0 }, |
| [MEDIA_AND_POISON][SCAN_MEDIA] = { "MEDIA_AND_POISON_SCAN_MEDIA", |
| cmd_media_scan_media, 17, CXL_MBOX_BACKGROUND_OPERATION }, |
| [MEDIA_AND_POISON][GET_SCAN_MEDIA_RESULTS] = { |
| "MEDIA_AND_POISON_GET_SCAN_MEDIA_RESULTS", |
| cmd_media_get_scan_media_results, 0, 0 }, |
| }; |
| |
| static const struct cxl_cmd cxl_cmd_set_dcd[256][256] = { |
| [DCD_CONFIG][GET_DC_CONFIG] = { "DCD_GET_DC_CONFIG", |
| cmd_dcd_get_dyn_cap_config, 2, 0 }, |
| [DCD_CONFIG][GET_DYN_CAP_EXT_LIST] = { |
| "DCD_GET_DYNAMIC_CAPACITY_EXTENT_LIST", cmd_dcd_get_dyn_cap_ext_list, |
| 8, 0 }, |
| [DCD_CONFIG][ADD_DYN_CAP_RSP] = { |
| "DCD_ADD_DYNAMIC_CAPACITY_RESPONSE", cmd_dcd_add_dyn_cap_rsp, |
| ~0, CXL_MBOX_IMMEDIATE_DATA_CHANGE }, |
| [DCD_CONFIG][RELEASE_DYN_CAP] = { |
| "DCD_RELEASE_DYNAMIC_CAPACITY", cmd_dcd_release_dyn_cap, |
| ~0, CXL_MBOX_IMMEDIATE_DATA_CHANGE }, |
| }; |
| |
| static const struct cxl_cmd cxl_cmd_set_sw[256][256] = { |
| [INFOSTAT][IS_IDENTIFY] = { "IDENTIFY", cmd_infostat_identify, 0, 0 }, |
| [INFOSTAT][BACKGROUND_OPERATION_STATUS] = { "BACKGROUND_OPERATION_STATUS", |
| cmd_infostat_bg_op_sts, 0, 0 }, |
| [TIMESTAMP][GET] = { "TIMESTAMP_GET", cmd_timestamp_get, 0, 0 }, |
| [TIMESTAMP][SET] = { "TIMESTAMP_SET", cmd_timestamp_set, 8, |
| CXL_MBOX_IMMEDIATE_POLICY_CHANGE }, |
| [LOGS][GET_SUPPORTED] = { "LOGS_GET_SUPPORTED", cmd_logs_get_supported, 0, |
| 0 }, |
| [LOGS][GET_LOG] = { "LOGS_GET_LOG", cmd_logs_get_log, 0x18, 0 }, |
| [PHYSICAL_SWITCH][IDENTIFY_SWITCH_DEVICE] = { "IDENTIFY_SWITCH_DEVICE", |
| cmd_identify_switch_device, 0, 0 }, |
| [PHYSICAL_SWITCH][GET_PHYSICAL_PORT_STATE] = { "SWITCH_PHYSICAL_PORT_STATS", |
| cmd_get_physical_port_state, ~0, 0 }, |
| [TUNNEL][MANAGEMENT_COMMAND] = { "TUNNEL_MANAGEMENT_COMMAND", |
| cmd_tunnel_management_cmd, ~0, 0 }, |
| }; |
| |
| /* |
| * While the command is executing in the background, the device should |
| * update the percentage complete in the Background Command Status Register |
| * at least once per second. |
| */ |
| |
| #define CXL_MBOX_BG_UPDATE_FREQ 1000UL |
| |
| int cxl_process_cci_message(CXLCCI *cci, uint8_t set, uint8_t cmd, |
| size_t len_in, uint8_t *pl_in, size_t *len_out, |
| uint8_t *pl_out, bool *bg_started) |
| { |
| int ret; |
| const struct cxl_cmd *cxl_cmd; |
| opcode_handler h; |
| CXLDeviceState *cxl_dstate; |
| |
| *len_out = 0; |
| cxl_cmd = &cci->cxl_cmd_set[set][cmd]; |
| h = cxl_cmd->handler; |
| if (!h) { |
| qemu_log_mask(LOG_UNIMP, "Command %04xh not implemented\n", |
| set << 8 | cmd); |
| return CXL_MBOX_UNSUPPORTED; |
| } |
| |
| if (len_in != cxl_cmd->in && cxl_cmd->in != ~0) { |
| return CXL_MBOX_INVALID_PAYLOAD_LENGTH; |
| } |
| |
| /* Only one bg command at a time */ |
| if ((cxl_cmd->effect & CXL_MBOX_BACKGROUND_OPERATION) && |
| cci->bg.runtime > 0) { |
| return CXL_MBOX_BUSY; |
| } |
| |
| /* forbid any selected commands while the media is disabled */ |
| if (object_dynamic_cast(OBJECT(cci->d), TYPE_CXL_TYPE3)) { |
| cxl_dstate = &CXL_TYPE3(cci->d)->cxl_dstate; |
| |
| if (cxl_dev_media_disabled(cxl_dstate)) { |
| if (h == cmd_events_get_records || |
| h == cmd_ccls_get_partition_info || |
| h == cmd_ccls_set_lsa || |
| h == cmd_ccls_get_lsa || |
| h == cmd_logs_get_log || |
| h == cmd_media_get_poison_list || |
| h == cmd_media_inject_poison || |
| h == cmd_media_clear_poison || |
| h == cmd_sanitize_overwrite || |
| h == cmd_firmware_update_transfer || |
| h == cmd_firmware_update_activate) { |
| return CXL_MBOX_MEDIA_DISABLED; |
| } |
| } |
| } |
| |
| ret = (*h)(cxl_cmd, pl_in, len_in, pl_out, len_out, cci); |
| if ((cxl_cmd->effect & CXL_MBOX_BACKGROUND_OPERATION) && |
| ret == CXL_MBOX_BG_STARTED) { |
| *bg_started = true; |
| } else { |
| *bg_started = false; |
| } |
| |
| /* Set bg and the return code */ |
| if (*bg_started) { |
| uint64_t now; |
| |
| cci->bg.opcode = (set << 8) | cmd; |
| |
| cci->bg.complete_pct = 0; |
| cci->bg.ret_code = 0; |
| |
| now = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL); |
| cci->bg.starttime = now; |
| timer_mod(cci->bg.timer, now + CXL_MBOX_BG_UPDATE_FREQ); |
| } |
| |
| return ret; |
| } |
| |
| static void bg_timercb(void *opaque) |
| { |
| CXLCCI *cci = opaque; |
| uint64_t now = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL); |
| uint64_t total_time = cci->bg.starttime + cci->bg.runtime; |
| |
| assert(cci->bg.runtime > 0); |
| |
| if (now >= total_time) { /* we are done */ |
| uint16_t ret = CXL_MBOX_SUCCESS; |
| |
| cci->bg.complete_pct = 100; |
| cci->bg.ret_code = ret; |
| switch (cci->bg.opcode) { |
| case 0x0201: /* fw transfer */ |
| __do_firmware_xfer(cci); |
| break; |
| case 0x4400: /* sanitize */ |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| |
| __do_sanitization(ct3d); |
| cxl_dev_enable_media(&ct3d->cxl_dstate); |
| } |
| break; |
| case 0x4304: /* scan media */ |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| |
| __do_scan_media(ct3d); |
| break; |
| } |
| default: |
| __builtin_unreachable(); |
| break; |
| } |
| } else { |
| /* estimate only */ |
| cci->bg.complete_pct = |
| 100 * (now - cci->bg.starttime) / cci->bg.runtime; |
| timer_mod(cci->bg.timer, now + CXL_MBOX_BG_UPDATE_FREQ); |
| } |
| |
| if (cci->bg.complete_pct == 100) { |
| /* TODO: generalize to switch CCI */ |
| CXLType3Dev *ct3d = CXL_TYPE3(cci->d); |
| CXLDeviceState *cxl_dstate = &ct3d->cxl_dstate; |
| PCIDevice *pdev = PCI_DEVICE(cci->d); |
| |
| cci->bg.starttime = 0; |
| /* registers are updated, allow new bg-capable cmds */ |
| cci->bg.runtime = 0; |
| |
| if (msix_enabled(pdev)) { |
| msix_notify(pdev, cxl_dstate->mbox_msi_n); |
| } else if (msi_enabled(pdev)) { |
| msi_notify(pdev, cxl_dstate->mbox_msi_n); |
| } |
| } |
| } |
| |
| static void cxl_rebuild_cel(CXLCCI *cci) |
| { |
| cci->cel_size = 0; /* Reset for a fresh build */ |
| for (int set = 0; set < 256; set++) { |
| for (int cmd = 0; cmd < 256; cmd++) { |
| if (cci->cxl_cmd_set[set][cmd].handler) { |
| const struct cxl_cmd *c = &cci->cxl_cmd_set[set][cmd]; |
| struct cel_log *log = |
| &cci->cel_log[cci->cel_size]; |
| |
| log->opcode = (set << 8) | cmd; |
| log->effect = c->effect; |
| cci->cel_size++; |
| } |
| } |
| } |
| } |
| |
| void cxl_init_cci(CXLCCI *cci, size_t payload_max) |
| { |
| cci->payload_max = payload_max; |
| cxl_rebuild_cel(cci); |
| |
| cci->bg.complete_pct = 0; |
| cci->bg.starttime = 0; |
| cci->bg.runtime = 0; |
| cci->bg.timer = timer_new_ms(QEMU_CLOCK_VIRTUAL, |
| bg_timercb, cci); |
| |
| memset(&cci->fw, 0, sizeof(cci->fw)); |
| cci->fw.active_slot = 1; |
| cci->fw.slot[cci->fw.active_slot - 1] = true; |
| } |
| |
| static void cxl_copy_cci_commands(CXLCCI *cci, const struct cxl_cmd (*cxl_cmds)[256]) |
| { |
| for (int set = 0; set < 256; set++) { |
| for (int cmd = 0; cmd < 256; cmd++) { |
| if (cxl_cmds[set][cmd].handler) { |
| cci->cxl_cmd_set[set][cmd] = cxl_cmds[set][cmd]; |
| } |
| } |
| } |
| } |
| |
| void cxl_add_cci_commands(CXLCCI *cci, const struct cxl_cmd (*cxl_cmd_set)[256], |
| size_t payload_max) |
| { |
| cci->payload_max = MAX(payload_max, cci->payload_max); |
| cxl_copy_cci_commands(cci, cxl_cmd_set); |
| cxl_rebuild_cel(cci); |
| } |
| |
| void cxl_initialize_mailbox_swcci(CXLCCI *cci, DeviceState *intf, |
| DeviceState *d, size_t payload_max) |
| { |
| cxl_copy_cci_commands(cci, cxl_cmd_set_sw); |
| cci->d = d; |
| cci->intf = intf; |
| cxl_init_cci(cci, payload_max); |
| } |
| |
| void cxl_initialize_mailbox_t3(CXLCCI *cci, DeviceState *d, size_t payload_max) |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(d); |
| |
| cxl_copy_cci_commands(cci, cxl_cmd_set); |
| if (ct3d->dc.num_regions) { |
| cxl_copy_cci_commands(cci, cxl_cmd_set_dcd); |
| } |
| cci->d = d; |
| |
| /* No separation for PCI MB as protocol handled in PCI device */ |
| cci->intf = d; |
| cxl_init_cci(cci, payload_max); |
| } |
| |
| static const struct cxl_cmd cxl_cmd_set_t3_ld[256][256] = { |
| [INFOSTAT][IS_IDENTIFY] = { "IDENTIFY", cmd_infostat_identify, 0, 0 }, |
| [LOGS][GET_SUPPORTED] = { "LOGS_GET_SUPPORTED", cmd_logs_get_supported, 0, |
| 0 }, |
| [LOGS][GET_LOG] = { "LOGS_GET_LOG", cmd_logs_get_log, 0x18, 0 }, |
| }; |
| |
| void cxl_initialize_t3_ld_cci(CXLCCI *cci, DeviceState *d, DeviceState *intf, |
| size_t payload_max) |
| { |
| cxl_copy_cci_commands(cci, cxl_cmd_set_t3_ld); |
| cci->d = d; |
| cci->intf = intf; |
| cxl_init_cci(cci, payload_max); |
| } |
| |
| static const struct cxl_cmd cxl_cmd_set_t3_fm_owned_ld_mctp[256][256] = { |
| [INFOSTAT][IS_IDENTIFY] = { "IDENTIFY", cmd_infostat_identify, 0, 0}, |
| [LOGS][GET_SUPPORTED] = { "LOGS_GET_SUPPORTED", cmd_logs_get_supported, 0, |
| 0 }, |
| [LOGS][GET_LOG] = { "LOGS_GET_LOG", cmd_logs_get_log, 0x18, 0 }, |
| [TIMESTAMP][GET] = { "TIMESTAMP_GET", cmd_timestamp_get, 0, 0 }, |
| [TUNNEL][MANAGEMENT_COMMAND] = { "TUNNEL_MANAGEMENT_COMMAND", |
| cmd_tunnel_management_cmd, ~0, 0 }, |
| }; |
| |
| void cxl_initialize_t3_fm_owned_ld_mctpcci(CXLCCI *cci, DeviceState *d, |
| DeviceState *intf, |
| size_t payload_max) |
| { |
| cxl_copy_cci_commands(cci, cxl_cmd_set_t3_fm_owned_ld_mctp); |
| cci->d = d; |
| cci->intf = intf; |
| cxl_init_cci(cci, payload_max); |
| } |