| /* |
| * tpm_ioctl.h |
| * |
| * (c) Copyright IBM Corporation 2014, 2015. |
| * |
| * This file is licensed under the terms of the 3-clause BSD license |
| */ |
| #ifndef _TPM_IOCTL_H_ |
| #define _TPM_IOCTL_H_ |
| |
| #if defined(__CYGWIN__) |
| # define __USE_LINUX_IOCTL_DEFS |
| #endif |
| |
| #ifndef _WIN32 |
| #include <sys/uio.h> |
| #include <sys/ioctl.h> |
| #endif |
| |
| #ifdef HAVE_SYS_IOCCOM_H |
| #include <sys/ioccom.h> |
| #endif |
| |
| /* |
| * Every response from a command involving a TPM command execution must hold |
| * the ptm_res as the first element. |
| * ptm_res corresponds to the error code of a command executed by the TPM. |
| */ |
| |
| typedef uint32_t ptm_res; |
| |
| /* PTM_GET_CAPABILITY: Get supported capabilities (ioctl's) */ |
| struct ptm_cap_n { |
| union { |
| struct { |
| ptm_res tpm_result; /* will always be TPM_SUCCESS (0) */ |
| uint32_t caps; |
| } resp; /* response */ |
| } u; |
| }; |
| |
| /* PTM_GET_TPMESTABLISHED: get the establishment bit */ |
| struct ptm_est { |
| union { |
| struct { |
| ptm_res tpm_result; |
| unsigned char bit; /* TPM established bit */ |
| } resp; /* response */ |
| } u; |
| }; |
| |
| /* PTM_RESET_TPMESTABLISHED: reset establishment bit */ |
| struct ptm_reset_est { |
| union { |
| struct { |
| uint8_t loc; /* locality to use */ |
| } req; /* request */ |
| struct { |
| ptm_res tpm_result; |
| } resp; /* response */ |
| } u; |
| }; |
| |
| /* PTM_INIT */ |
| struct ptm_init { |
| union { |
| struct { |
| uint32_t init_flags; /* see definitions below */ |
| } req; /* request */ |
| struct { |
| ptm_res tpm_result; |
| } resp; /* response */ |
| } u; |
| }; |
| |
| /* above init_flags */ |
| #define PTM_INIT_FLAG_DELETE_VOLATILE (1 << 0) |
| /* delete volatile state file after reading it */ |
| |
| /* PTM_SET_LOCALITY */ |
| struct ptm_loc { |
| union { |
| struct { |
| uint8_t loc; /* locality to set */ |
| } req; /* request */ |
| struct { |
| ptm_res tpm_result; |
| } resp; /* response */ |
| } u; |
| }; |
| |
| /* PTM_HASH_DATA: hash given data */ |
| struct ptm_hdata { |
| union { |
| struct { |
| uint32_t length; |
| uint8_t data[4096]; |
| } req; /* request */ |
| struct { |
| ptm_res tpm_result; |
| } resp; /* response */ |
| } u; |
| }; |
| |
| /* |
| * size of the TPM state blob to transfer; x86_64 can handle 8k, |
| * ppc64le only ~7k; keep the response below a 4k page size |
| */ |
| #define PTM_STATE_BLOB_SIZE (3 * 1024) |
| |
| /* |
| * The following is the data structure to get state blobs from the TPM. |
| * If the size of the state blob exceeds the PTM_STATE_BLOB_SIZE, multiple reads |
| * with this ioctl and with adjusted offset are necessary. All bytes |
| * must be transferred and the transfer is done once the last byte has been |
| * returned. |
| * It is possible to use the read() interface for reading the data; however, the |
| * first bytes of the state blob will be part of the response to the ioctl(); a |
| * subsequent read() is only necessary if the total length (totlength) exceeds |
| * the number of received bytes. seek() is not supported. |
| */ |
| struct ptm_getstate { |
| union { |
| struct { |
| uint32_t state_flags; /* may be: PTM_STATE_FLAG_DECRYPTED */ |
| uint32_t type; /* which blob to pull */ |
| uint32_t offset; /* offset from where to read */ |
| } req; /* request */ |
| struct { |
| ptm_res tpm_result; |
| uint32_t state_flags; /* may be: PTM_STATE_FLAG_ENCRYPTED */ |
| uint32_t totlength; /* total length that will be transferred */ |
| uint32_t length; /* number of bytes in following buffer */ |
| uint8_t data[PTM_STATE_BLOB_SIZE]; |
| } resp; /* response */ |
| } u; |
| }; |
| |
| /* TPM state blob types */ |
| #define PTM_BLOB_TYPE_PERMANENT 1 |
| #define PTM_BLOB_TYPE_VOLATILE 2 |
| #define PTM_BLOB_TYPE_SAVESTATE 3 |
| |
| /* state_flags above : */ |
| #define PTM_STATE_FLAG_DECRYPTED 1 /* on input: get decrypted state */ |
| #define PTM_STATE_FLAG_ENCRYPTED 2 /* on output: state is encrypted */ |
| |
| /* |
| * The following is the data structure to set state blobs in the TPM. |
| * If the size of the state blob exceeds the PTM_STATE_BLOB_SIZE, multiple |
| * 'writes' using this ioctl are necessary. The last packet is indicated |
| * by the length being smaller than the PTM_STATE_BLOB_SIZE. |
| * The very first packet may have a length indicator of '0' enabling |
| * a write() with all the bytes from a buffer. If the write() interface |
| * is used, a final ioctl with a non-full buffer must be made to indicate |
| * that all data were transferred (a write with 0 bytes would not work). |
| */ |
| struct ptm_setstate { |
| union { |
| struct { |
| uint32_t state_flags; /* may be PTM_STATE_FLAG_ENCRYPTED */ |
| uint32_t type; /* which blob to set */ |
| uint32_t length; /* length of the data; |
| use 0 on the first packet to |
| transfer using write() */ |
| uint8_t data[PTM_STATE_BLOB_SIZE]; |
| } req; /* request */ |
| struct { |
| ptm_res tpm_result; |
| } resp; /* response */ |
| } u; |
| }; |
| |
| /* |
| * PTM_GET_CONFIG: Data structure to get runtime configuration information |
| * such as which keys are applied. |
| */ |
| struct ptm_getconfig { |
| union { |
| struct { |
| ptm_res tpm_result; |
| uint32_t flags; |
| } resp; /* response */ |
| } u; |
| }; |
| |
| #define PTM_CONFIG_FLAG_FILE_KEY 0x1 |
| #define PTM_CONFIG_FLAG_MIGRATION_KEY 0x2 |
| |
| /* |
| * PTM_SET_BUFFERSIZE: Set the buffer size to be used by the TPM. |
| * A 0 on input queries for the current buffer size. Any other |
| * number will try to set the buffer size. The returned number is |
| * the buffer size that will be used, which can be larger than the |
| * requested one, if it was below the minimum, or smaller than the |
| * requested one, if it was above the maximum. |
| */ |
| struct ptm_setbuffersize { |
| union { |
| struct { |
| uint32_t buffersize; /* 0 to query for current buffer size */ |
| } req; /* request */ |
| struct { |
| ptm_res tpm_result; |
| uint32_t buffersize; /* buffer size in use */ |
| uint32_t minsize; /* min. supported buffer size */ |
| uint32_t maxsize; /* max. supported buffer size */ |
| } resp; /* response */ |
| } u; |
| }; |
| |
| #define PTM_GETINFO_SIZE (3 * 1024) |
| /* |
| * PTM_GET_INFO: Get info about the TPM implementation (from libtpms) |
| * |
| * This request allows to indirectly call TPMLIB_GetInfo(flags) and |
| * retrieve information from libtpms. |
| * Only one transaction is currently necessary for returning results |
| * to a client. Therefore, totlength and length will be the same if |
| * offset is 0. |
| */ |
| struct ptm_getinfo { |
| union { |
| struct { |
| uint64_t flags; |
| uint32_t offset; /* offset from where to read */ |
| uint32_t pad; /* 32 bit arch */ |
| } req; /* request */ |
| struct { |
| ptm_res tpm_result; |
| uint32_t totlength; |
| uint32_t length; |
| char buffer[PTM_GETINFO_SIZE]; |
| } resp; /* response */ |
| } u; |
| }; |
| |
| #define SWTPM_INFO_TPMSPECIFICATION ((uint64_t)1 << 0) |
| #define SWTPM_INFO_TPMATTRIBUTES ((uint64_t)1 << 1) |
| |
| /* |
| * PTM_LOCK_STORAGE: Lock the storage and retry n times |
| */ |
| struct ptm_lockstorage { |
| union { |
| struct { |
| uint32_t retries; /* number of retries */ |
| } req; /* request */ |
| struct { |
| ptm_res tpm_result; |
| } resp; /* response */ |
| } u; |
| }; |
| |
| typedef uint64_t ptm_cap; /* CUSE-only; use ptm_cap_n otherwise */ |
| typedef struct ptm_cap_n ptm_cap_n; |
| typedef struct ptm_est ptm_est; |
| typedef struct ptm_reset_est ptm_reset_est; |
| typedef struct ptm_loc ptm_loc; |
| typedef struct ptm_hdata ptm_hdata; |
| typedef struct ptm_init ptm_init; |
| typedef struct ptm_getstate ptm_getstate; |
| typedef struct ptm_setstate ptm_setstate; |
| typedef struct ptm_getconfig ptm_getconfig; |
| typedef struct ptm_setbuffersize ptm_setbuffersize; |
| typedef struct ptm_getinfo ptm_getinfo; |
| typedef struct ptm_lockstorage ptm_lockstorage; |
| |
| /* capability flags returned by PTM_GET_CAPABILITY */ |
| #define PTM_CAP_INIT (1) |
| #define PTM_CAP_SHUTDOWN (1 << 1) |
| #define PTM_CAP_GET_TPMESTABLISHED (1 << 2) |
| #define PTM_CAP_SET_LOCALITY (1 << 3) |
| #define PTM_CAP_HASHING (1 << 4) |
| #define PTM_CAP_CANCEL_TPM_CMD (1 << 5) |
| #define PTM_CAP_STORE_VOLATILE (1 << 6) |
| #define PTM_CAP_RESET_TPMESTABLISHED (1 << 7) |
| #define PTM_CAP_GET_STATEBLOB (1 << 8) |
| #define PTM_CAP_SET_STATEBLOB (1 << 9) |
| #define PTM_CAP_STOP (1 << 10) |
| #define PTM_CAP_GET_CONFIG (1 << 11) |
| #define PTM_CAP_SET_DATAFD (1 << 12) |
| #define PTM_CAP_SET_BUFFERSIZE (1 << 13) |
| #define PTM_CAP_GET_INFO (1 << 14) |
| #define PTM_CAP_SEND_COMMAND_HEADER (1 << 15) |
| #define PTM_CAP_LOCK_STORAGE (1 << 16) |
| |
| #ifndef _WIN32 |
| enum { |
| PTM_GET_CAPABILITY = _IOR('P', 0, ptm_cap), |
| PTM_INIT = _IOWR('P', 1, ptm_init), |
| PTM_SHUTDOWN = _IOR('P', 2, ptm_res), |
| PTM_GET_TPMESTABLISHED = _IOR('P', 3, ptm_est), |
| PTM_SET_LOCALITY = _IOWR('P', 4, ptm_loc), |
| PTM_HASH_START = _IOR('P', 5, ptm_res), |
| PTM_HASH_DATA = _IOWR('P', 6, ptm_hdata), |
| PTM_HASH_END = _IOR('P', 7, ptm_res), |
| PTM_CANCEL_TPM_CMD = _IOR('P', 8, ptm_res), |
| PTM_STORE_VOLATILE = _IOR('P', 9, ptm_res), |
| PTM_RESET_TPMESTABLISHED = _IOWR('P', 10, ptm_reset_est), |
| PTM_GET_STATEBLOB = _IOWR('P', 11, ptm_getstate), |
| PTM_SET_STATEBLOB = _IOWR('P', 12, ptm_setstate), |
| PTM_STOP = _IOR('P', 13, ptm_res), |
| PTM_GET_CONFIG = _IOR('P', 14, ptm_getconfig), |
| PTM_SET_DATAFD = _IOR('P', 15, ptm_res), |
| PTM_SET_BUFFERSIZE = _IOWR('P', 16, ptm_setbuffersize), |
| PTM_GET_INFO = _IOWR('P', 17, ptm_getinfo), |
| PTM_LOCK_STORAGE = _IOWR('P', 18, ptm_lockstorage), |
| }; |
| #endif |
| |
| /* |
| * Commands used by the non-CUSE TPMs |
| * |
| * All messages container big-endian data. |
| * |
| * The return messages only contain the 'resp' part of the unions |
| * in the data structures above. Besides that the limits in the |
| * buffers above (ptm_hdata:u.req.data and ptm_get_state:u.resp.data |
| * and ptm_set_state:u.req.data) are 0xffffffff. |
| */ |
| enum { |
| CMD_GET_CAPABILITY = 1, /* 0x01 */ |
| CMD_INIT, /* 0x02 */ |
| CMD_SHUTDOWN, /* 0x03 */ |
| CMD_GET_TPMESTABLISHED, /* 0x04 */ |
| CMD_SET_LOCALITY, /* 0x05 */ |
| CMD_HASH_START, /* 0x06 */ |
| CMD_HASH_DATA, /* 0x07 */ |
| CMD_HASH_END, /* 0x08 */ |
| CMD_CANCEL_TPM_CMD, /* 0x09 */ |
| CMD_STORE_VOLATILE, /* 0x0a */ |
| CMD_RESET_TPMESTABLISHED, /* 0x0b */ |
| CMD_GET_STATEBLOB, /* 0x0c */ |
| CMD_SET_STATEBLOB, /* 0x0d */ |
| CMD_STOP, /* 0x0e */ |
| CMD_GET_CONFIG, /* 0x0f */ |
| CMD_SET_DATAFD, /* 0x10 */ |
| CMD_SET_BUFFERSIZE, /* 0x11 */ |
| CMD_GET_INFO, /* 0x12 */ |
| CMD_LOCK_STORAGE, /* 0x13 */ |
| }; |
| |
| #endif /* _TPM_IOCTL_H_ */ |