| /* |
| * Decode table flags, mostly based on Intel SDM. |
| * |
| * Copyright (c) 2022 Red Hat, Inc. |
| * |
| * Author: Paolo Bonzini <pbonzini@redhat.com> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| typedef enum X86OpType { |
| X86_TYPE_None, |
| |
| X86_TYPE_A, /* Implicit */ |
| X86_TYPE_B, /* VEX.vvvv selects a GPR */ |
| X86_TYPE_C, /* REG in the modrm byte selects a control register */ |
| X86_TYPE_D, /* REG in the modrm byte selects a debug register */ |
| X86_TYPE_E, /* ALU modrm operand */ |
| X86_TYPE_F, /* EFLAGS/RFLAGS */ |
| X86_TYPE_G, /* REG in the modrm byte selects a GPR */ |
| X86_TYPE_H, /* For AVX, VEX.vvvv selects an XMM/YMM register */ |
| X86_TYPE_I, /* Immediate */ |
| X86_TYPE_J, /* Relative offset for a jump */ |
| X86_TYPE_L, /* The upper 4 bits of the immediate select a 128-bit register */ |
| X86_TYPE_M, /* modrm byte selects a memory operand */ |
| X86_TYPE_N, /* R/M in the modrm byte selects an MMX register */ |
| X86_TYPE_O, /* Absolute address encoded in the instruction */ |
| X86_TYPE_P, /* reg in the modrm byte selects an MMX register */ |
| X86_TYPE_Q, /* MMX modrm operand */ |
| X86_TYPE_R, /* R/M in the modrm byte selects a register */ |
| X86_TYPE_S, /* reg selects a segment register */ |
| X86_TYPE_U, /* R/M in the modrm byte selects an XMM/YMM register */ |
| X86_TYPE_V, /* reg in the modrm byte selects an XMM/YMM register */ |
| X86_TYPE_W, /* XMM/YMM modrm operand */ |
| X86_TYPE_X, /* string source */ |
| X86_TYPE_Y, /* string destination */ |
| |
| /* Custom */ |
| X86_TYPE_EM, /* modrm byte selects an ALU memory operand */ |
| X86_TYPE_WM, /* modrm byte selects an XMM/YMM memory operand */ |
| X86_TYPE_I_unsigned, /* Immediate, zero-extended */ |
| X86_TYPE_nop, /* modrm operand decoded but not loaded into s->T{0,1} */ |
| X86_TYPE_2op, /* 2-operand RMW instruction */ |
| X86_TYPE_LoBits, /* encoded in bits 0-2 of the operand + REX.B */ |
| X86_TYPE_0, /* Hard-coded GPRs (RAX..RDI) */ |
| X86_TYPE_1, |
| X86_TYPE_2, |
| X86_TYPE_3, |
| X86_TYPE_4, |
| X86_TYPE_5, |
| X86_TYPE_6, |
| X86_TYPE_7, |
| X86_TYPE_ES, /* Hard-coded segment registers */ |
| X86_TYPE_CS, |
| X86_TYPE_SS, |
| X86_TYPE_DS, |
| X86_TYPE_FS, |
| X86_TYPE_GS, |
| } X86OpType; |
| |
| typedef enum X86OpSize { |
| X86_SIZE_None, |
| |
| X86_SIZE_a, /* BOUND operand */ |
| X86_SIZE_b, /* byte */ |
| X86_SIZE_d, /* 32-bit */ |
| X86_SIZE_dq, /* SSE/AVX 128-bit */ |
| X86_SIZE_p, /* Far pointer */ |
| X86_SIZE_pd, /* SSE/AVX packed double precision */ |
| X86_SIZE_pi, /* MMX */ |
| X86_SIZE_ps, /* SSE/AVX packed single precision */ |
| X86_SIZE_q, /* 64-bit */ |
| X86_SIZE_qq, /* AVX 256-bit */ |
| X86_SIZE_s, /* Descriptor */ |
| X86_SIZE_sd, /* SSE/AVX scalar double precision */ |
| X86_SIZE_ss, /* SSE/AVX scalar single precision */ |
| X86_SIZE_si, /* 32-bit GPR */ |
| X86_SIZE_v, /* 16/32/64-bit, based on operand size */ |
| X86_SIZE_w, /* 16-bit */ |
| X86_SIZE_x, /* 128/256-bit, based on operand size */ |
| X86_SIZE_y, /* 32/64-bit, based on operand size */ |
| X86_SIZE_y_d64, /* 32/64-bit, based on 64-bit mode */ |
| X86_SIZE_z, /* 16-bit for 16-bit operand size, else 32-bit */ |
| X86_SIZE_z_f64, /* 32-bit for 32-bit operand size or 64-bit mode, else 16-bit */ |
| |
| /* Custom */ |
| X86_SIZE_d64, |
| X86_SIZE_f64, |
| X86_SIZE_xh, /* SSE/AVX packed half register */ |
| } X86OpSize; |
| |
| typedef enum X86CPUIDFeature { |
| X86_FEAT_None, |
| X86_FEAT_3DNOW, |
| X86_FEAT_ADX, |
| X86_FEAT_AES, |
| X86_FEAT_AVX, |
| X86_FEAT_AVX2, |
| X86_FEAT_BMI1, |
| X86_FEAT_BMI2, |
| X86_FEAT_CLFLUSH, |
| X86_FEAT_CLFLUSHOPT, |
| X86_FEAT_CLWB, |
| X86_FEAT_CMOV, |
| X86_FEAT_CMPCCXADD, |
| X86_FEAT_F16C, |
| X86_FEAT_FMA, |
| X86_FEAT_FSGSBASE, |
| X86_FEAT_FXSR, |
| X86_FEAT_MOVBE, |
| X86_FEAT_PCLMULQDQ, |
| X86_FEAT_POPCNT, |
| X86_FEAT_SHA_NI, |
| X86_FEAT_SSE, |
| X86_FEAT_SSE2, |
| X86_FEAT_SSE3, |
| X86_FEAT_SSSE3, |
| X86_FEAT_SSE41, |
| X86_FEAT_SSE42, |
| X86_FEAT_SSE4A, |
| X86_FEAT_XSAVE, |
| X86_FEAT_XSAVEOPT, |
| } X86CPUIDFeature; |
| |
| /* Execution flags */ |
| |
| typedef enum X86OpUnit { |
| X86_OP_SKIP, /* not valid or managed by emission function */ |
| X86_OP_SEG, /* segment selector */ |
| X86_OP_CR, /* control register */ |
| X86_OP_DR, /* debug register */ |
| X86_OP_INT, /* loaded into/stored from s->T0/T1 */ |
| X86_OP_IMM, /* immediate */ |
| X86_OP_SSE, /* address in either s->ptrX or s->A0 depending on has_ea */ |
| X86_OP_MMX, /* address in either s->ptrX or s->A0 depending on has_ea */ |
| } X86OpUnit; |
| |
| typedef enum X86InsnCheck { |
| /* Illegal or exclusive to 64-bit mode */ |
| X86_CHECK_i64 = 1, |
| X86_CHECK_o64 = 2, |
| |
| /* Fault in vm86 mode */ |
| X86_CHECK_no_vm86 = 4, |
| |
| /* Privileged instruction checks */ |
| X86_CHECK_cpl0 = 8, |
| X86_CHECK_vm86_iopl = 16, |
| X86_CHECK_cpl_iopl = 32, |
| X86_CHECK_iopl = X86_CHECK_cpl_iopl | X86_CHECK_vm86_iopl, |
| |
| /* Fault if VEX.L=1 */ |
| X86_CHECK_VEX128 = 64, |
| |
| /* Fault if VEX.W=1 */ |
| X86_CHECK_W0 = 128, |
| |
| /* Fault if VEX.W=0 */ |
| X86_CHECK_W1 = 256, |
| |
| /* Fault outside protected mode, possibly including vm86 mode */ |
| X86_CHECK_prot_or_vm86 = 512, |
| X86_CHECK_prot = X86_CHECK_prot_or_vm86 | X86_CHECK_no_vm86, |
| |
| /* Fault outside SMM */ |
| X86_CHECK_smm = 1024, |
| |
| /* Vendor-specific checks for Intel/AMD differences */ |
| X86_CHECK_i64_amd = 2048, |
| X86_CHECK_o64_intel = 4096, |
| } X86InsnCheck; |
| |
| typedef enum X86InsnSpecial { |
| X86_SPECIAL_None, |
| |
| /* Accepts LOCK prefix; LOCKed operations do not load or writeback operand 0 */ |
| X86_SPECIAL_HasLock, |
| |
| /* Always locked if it has a memory operand (XCHG) */ |
| X86_SPECIAL_Locked, |
| |
| /* Like HasLock, but also operand 2 provides bit displacement into memory. */ |
| X86_SPECIAL_BitTest, |
| |
| /* Do not load effective address in s->A0 */ |
| X86_SPECIAL_NoLoadEA, |
| |
| /* |
| * Rd/Mb or Rd/Mw in the manual: register operand 0 is treated as 32 bits |
| * (and writeback zero-extends it to 64 bits if applicable). PREFIX_DATA |
| * does not trigger 16-bit writeback and, as a side effect, high-byte |
| * registers are never used. |
| */ |
| X86_SPECIAL_Op0_Rd, |
| |
| /* |
| * Ry/Mb in the manual (PINSRB). However, the high bits are never used by |
| * the instruction in either the register or memory cases; the *real* effect |
| * of this modifier is that high-byte registers are never used, even without |
| * a REX prefix. Therefore, PINSRW does not need it despite having Ry/Mw. |
| */ |
| X86_SPECIAL_Op2_Ry, |
| |
| /* |
| * Register operand 2 is extended to full width, while a memory operand |
| * is doubled in size if VEX.L=1. |
| */ |
| X86_SPECIAL_AVXExtMov, |
| |
| /* |
| * MMX instruction exists with no prefix; if there is no prefix, V/H/W/U operands |
| * become P/P/Q/N, and size "x" becomes "q". |
| */ |
| X86_SPECIAL_MMX, |
| |
| /* When loaded into s->T0, register operand 1 is zero/sign extended. */ |
| X86_SPECIAL_SExtT0, |
| X86_SPECIAL_ZExtT0, |
| |
| /* Memory operand size of MOV from segment register is MO_16 */ |
| X86_SPECIAL_Op0_Mw, |
| } X86InsnSpecial; |
| |
| /* |
| * Special cases for instructions that operate on XMM/YMM registers. Intel |
| * retconned all of them to have VEX exception classes other than 0 and 13, so |
| * all these only matter for instructions that have a VEX exception class. |
| * Based on tables in the "AVX and SSE Instruction Exception Specification" |
| * section of the manual. |
| */ |
| typedef enum X86VEXSpecial { |
| /* Legacy SSE instructions that allow unaligned operands */ |
| X86_VEX_SSEUnaligned, |
| |
| /* |
| * Used for instructions that distinguish the XMM operand type with an |
| * instruction prefix; legacy SSE encodings will allow unaligned operands |
| * for scalar operands only (identified by a REP prefix). In this case, |
| * the decoding table uses "x" for the vector operands instead of specifying |
| * pd/ps/sd/ss individually. |
| */ |
| X86_VEX_REPScalar, |
| |
| /* |
| * VEX instructions that only support 256-bit operands with AVX2 (Table 2-17 |
| * column 3). Columns 2 and 4 (instructions limited to 256- and 127-bit |
| * operands respectively) are implicit in the presence of dq and qq |
| * operands, and thus handled by decode_op_size. |
| */ |
| X86_VEX_AVX2_256, |
| } X86VEXSpecial; |
| |
| |
| typedef struct X86OpEntry X86OpEntry; |
| typedef struct X86DecodedInsn X86DecodedInsn; |
| struct DisasContext; |
| |
| /* Decode function for multibyte opcodes. */ |
| typedef void (*X86DecodeFunc)(struct DisasContext *s, CPUX86State *env, X86OpEntry *entry, uint8_t *b); |
| |
| /* Code generation function. */ |
| typedef void (*X86GenFunc)(struct DisasContext *s, X86DecodedInsn *decode); |
| |
| struct X86OpEntry { |
| /* Based on the is_decode flags. */ |
| union { |
| X86GenFunc gen; |
| X86DecodeFunc decode; |
| }; |
| /* op0 is always written, op1 and op2 are always read. */ |
| X86OpType op0:8; |
| X86OpSize s0:8; |
| X86OpType op1:8; |
| X86OpSize s1:8; |
| X86OpType op2:8; |
| X86OpSize s2:8; |
| /* Must be I and b respectively if present. */ |
| X86OpType op3:8; |
| X86OpSize s3:8; |
| |
| X86InsnSpecial special:8; |
| X86CPUIDFeature cpuid:8; |
| unsigned vex_class:8; |
| X86VEXSpecial vex_special:8; |
| unsigned valid_prefix:16; |
| unsigned check:16; |
| unsigned intercept:8; |
| bool has_intercept:1; |
| bool is_decode:1; |
| }; |
| |
| typedef struct X86DecodedOp { |
| int8_t n; |
| MemOp ot; /* For b/c/d/p/s/q/v/w/y/z */ |
| X86OpUnit unit; |
| bool has_ea; |
| int offset; /* For MMX and SSE */ |
| |
| union { |
| target_ulong imm; |
| /* |
| * This field is used internally by macros OP0_PTR/OP1_PTR/OP2_PTR, |
| * do not access directly! |
| */ |
| TCGv_ptr v_ptr; |
| }; |
| } X86DecodedOp; |
| |
| typedef struct AddressParts { |
| int def_seg; |
| int base; |
| int index; |
| int scale; |
| target_long disp; |
| } AddressParts; |
| |
| struct X86DecodedInsn { |
| X86OpEntry e; |
| X86DecodedOp op[3]; |
| /* |
| * Rightmost immediate, for convenience since most instructions have |
| * one (and also for 4-operand instructions). |
| */ |
| target_ulong immediate; |
| AddressParts mem; |
| |
| TCGv cc_dst, cc_src, cc_src2; |
| TCGv_i32 cc_op_dynamic; |
| int8_t cc_op; |
| |
| uint8_t b; |
| }; |
| |
| static void gen_lea_modrm(struct DisasContext *s, X86DecodedInsn *decode); |