| # See docs/devel/tracing.txt for syntax documentation. |
| |
| # slavio_timer.c |
| slavio_timer_get_out(uint64_t limit, uint32_t counthigh, uint32_t count) "limit 0x%"PRIx64" count 0x%x0x%08x" |
| slavio_timer_irq(uint32_t counthigh, uint32_t count) "callback: count 0x%x0x%08x" |
| slavio_timer_mem_readl_invalid(uint64_t addr) "invalid read address 0x%"PRIx64 |
| slavio_timer_mem_readl(uint64_t addr, uint32_t ret) "read 0x%"PRIx64" = 0x%08x" |
| slavio_timer_mem_writel(uint64_t addr, uint32_t val) "write 0x%"PRIx64" = 0x%08x" |
| slavio_timer_mem_writel_limit(unsigned int timer_index, uint64_t count) "processor %d user timer set to 0x%016"PRIx64 |
| slavio_timer_mem_writel_counter_invalid(void) "not user timer" |
| slavio_timer_mem_writel_status_start(unsigned int timer_index) "processor %d user timer started" |
| slavio_timer_mem_writel_status_stop(unsigned int timer_index) "processor %d user timer stopped" |
| slavio_timer_mem_writel_mode_user(unsigned int timer_index) "processor %d changed from counter to user timer" |
| slavio_timer_mem_writel_mode_counter(unsigned int timer_index) "processor %d changed from user timer to counter" |
| slavio_timer_mem_writel_mode_invalid(void) "not system timer" |
| slavio_timer_mem_writel_invalid(uint64_t addr) "invalid write address 0x%"PRIx64 |
| |
| # grlib_gptimer.c |
| grlib_gptimer_enable(int id, uint32_t count) "timer:%d set count 0x%x and run" |
| grlib_gptimer_disabled(int id, uint32_t config) "timer:%d Timer disable config 0x%x" |
| grlib_gptimer_restart(int id, uint32_t reload) "timer:%d reload val: 0x%x" |
| grlib_gptimer_set_scaler(uint32_t scaler, uint32_t freq) "scaler:0x%x freq: 0x%x" |
| grlib_gptimer_hit(int id) "timer:%d HIT" |
| grlib_gptimer_readl(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x" |
| grlib_gptimer_writel(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x" |
| |
| # lm32_timer.c |
| lm32_timer_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" |
| lm32_timer_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" |
| lm32_timer_hit(void) "timer hit" |
| lm32_timer_irq_state(int level) "irq state %d" |
| |
| # milkymist-sysctl.c |
| milkymist_sysctl_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" |
| milkymist_sysctl_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" |
| milkymist_sysctl_icap_write(uint32_t value) "value 0x%08x" |
| milkymist_sysctl_start_timer0(void) "Start timer0" |
| milkymist_sysctl_stop_timer0(void) "Stop timer0" |
| milkymist_sysctl_start_timer1(void) "Start timer1" |
| milkymist_sysctl_stop_timer1(void) "Stop timer1" |
| milkymist_sysctl_pulse_irq_timer0(void) "Pulse IRQ Timer0" |
| milkymist_sysctl_pulse_irq_timer1(void) "Pulse IRQ Timer1" |
| |
| # aspeed_timer.c |
| aspeed_timer_ctrl_enable(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" |
| aspeed_timer_ctrl_external_clock(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" |
| aspeed_timer_ctrl_overflow_interrupt(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" |
| aspeed_timer_ctrl_pulse_enable(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" |
| aspeed_timer_set_ctrl2(uint32_t value) "Value: 0x%" PRIx32 |
| aspeed_timer_set_value(int timer, int reg, uint32_t value) "Timer %d register %d: 0x%" PRIx32 |
| aspeed_timer_read(uint64_t offset, unsigned size, uint64_t value) "From 0x%" PRIx64 ": of size %u: 0x%" PRIx64 |
| |
| # armv7m_systick.c |
| systick_reload(void) "systick reload" |
| systick_timer_tick(void) "systick reload" |
| systick_read(uint64_t addr, uint32_t value, unsigned size) "systick read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" |
| systick_write(uint64_t addr, uint32_t value, unsigned size) "systick write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" |
| |
| # cmsdk-apb-timer.c |
| cmsdk_apb_timer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" |
| cmsdk_apb_timer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" |
| cmsdk_apb_timer_reset(void) "CMSDK APB timer: reset" |
| |
| # cmsdk-apb-dualtimer.c |
| cmsdk_apb_dualtimer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB dualtimer read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" |
| cmsdk_apb_dualtimer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB dualtimer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" |
| cmsdk_apb_dualtimer_reset(void) "CMSDK APB dualtimer: reset" |
| |
| # sun4v-rtc.c |
| sun4v_rtc_read(uint64_t addr, uint64_t value) "read: addr 0x%" PRIx64 " value 0x%" PRIx64 |
| sun4v_rtc_write(uint64_t addr, uint64_t value) "write: addr 0x%" PRIx64 " value 0x%" PRIx64 |
| |
| # xlnx-zynqmp-rtc.c |
| xlnx_zynqmp_rtc_gettime(int year, int month, int day, int hour, int min, int sec) "Get time from host: %d-%d-%d %2d:%02d:%02d" |
| |
| # nrf51_timer.c |
| nrf51_timer_read(uint64_t addr, uint32_t value, unsigned size) "read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" |
| nrf51_timer_write(uint64_t addr, uint32_t value, unsigned size) "write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" |
| |
| # pl031.c |
| pl031_irq_state(int level) "irq state %d" |
| pl031_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" |
| pl031_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" |
| pl031_alarm_raised(void) "alarm raised" |
| pl031_set_alarm(uint32_t ticks) "alarm set for %u ticks" |
