| /* |
| * Vhost User library |
| * |
| * Copyright (c) 2016 Red Hat, Inc. |
| * |
| * Authors: |
| * Victor Kaplansky <victork@redhat.com> |
| * Marc-André Lureau <mlureau@redhat.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or |
| * later. See the COPYING file in the top-level directory. |
| */ |
| |
| #ifndef LIBVHOST_USER_H |
| #define LIBVHOST_USER_H |
| |
| #include <stdint.h> |
| #include <stdbool.h> |
| #include <stddef.h> |
| #include <sys/poll.h> |
| #include <linux/vhost.h> |
| #include <pthread.h> |
| #include "standard-headers/linux/virtio_ring.h" |
| |
| /* Based on qemu/hw/virtio/vhost-user.c */ |
| #define VHOST_USER_F_PROTOCOL_FEATURES 30 |
| #define VHOST_LOG_PAGE 4096 |
| |
| #define VIRTQUEUE_MAX_SIZE 1024 |
| |
| #define VHOST_MEMORY_BASELINE_NREGIONS 8 |
| |
| /* |
| * Set a reasonable maximum number of ram slots, which will be supported by |
| * any architecture. |
| */ |
| #define VHOST_USER_MAX_RAM_SLOTS 32 |
| |
| typedef enum VhostSetConfigType { |
| VHOST_SET_CONFIG_TYPE_MASTER = 0, |
| VHOST_SET_CONFIG_TYPE_MIGRATION = 1, |
| } VhostSetConfigType; |
| |
| /* |
| * Maximum size of virtio device config space |
| */ |
| #define VHOST_USER_MAX_CONFIG_SIZE 256 |
| |
| enum VhostUserProtocolFeature { |
| VHOST_USER_PROTOCOL_F_MQ = 0, |
| VHOST_USER_PROTOCOL_F_LOG_SHMFD = 1, |
| VHOST_USER_PROTOCOL_F_RARP = 2, |
| VHOST_USER_PROTOCOL_F_REPLY_ACK = 3, |
| VHOST_USER_PROTOCOL_F_NET_MTU = 4, |
| VHOST_USER_PROTOCOL_F_SLAVE_REQ = 5, |
| VHOST_USER_PROTOCOL_F_CROSS_ENDIAN = 6, |
| VHOST_USER_PROTOCOL_F_CRYPTO_SESSION = 7, |
| VHOST_USER_PROTOCOL_F_PAGEFAULT = 8, |
| VHOST_USER_PROTOCOL_F_CONFIG = 9, |
| VHOST_USER_PROTOCOL_F_SLAVE_SEND_FD = 10, |
| VHOST_USER_PROTOCOL_F_HOST_NOTIFIER = 11, |
| VHOST_USER_PROTOCOL_F_INFLIGHT_SHMFD = 12, |
| VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS = 14, |
| VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS = 15, |
| |
| VHOST_USER_PROTOCOL_F_MAX |
| }; |
| |
| #define VHOST_USER_PROTOCOL_FEATURE_MASK ((1 << VHOST_USER_PROTOCOL_F_MAX) - 1) |
| |
| typedef enum VhostUserRequest { |
| VHOST_USER_NONE = 0, |
| VHOST_USER_GET_FEATURES = 1, |
| VHOST_USER_SET_FEATURES = 2, |
| VHOST_USER_SET_OWNER = 3, |
| VHOST_USER_RESET_OWNER = 4, |
| VHOST_USER_SET_MEM_TABLE = 5, |
| VHOST_USER_SET_LOG_BASE = 6, |
| VHOST_USER_SET_LOG_FD = 7, |
| VHOST_USER_SET_VRING_NUM = 8, |
| VHOST_USER_SET_VRING_ADDR = 9, |
| VHOST_USER_SET_VRING_BASE = 10, |
| VHOST_USER_GET_VRING_BASE = 11, |
| VHOST_USER_SET_VRING_KICK = 12, |
| VHOST_USER_SET_VRING_CALL = 13, |
| VHOST_USER_SET_VRING_ERR = 14, |
| VHOST_USER_GET_PROTOCOL_FEATURES = 15, |
| VHOST_USER_SET_PROTOCOL_FEATURES = 16, |
| VHOST_USER_GET_QUEUE_NUM = 17, |
| VHOST_USER_SET_VRING_ENABLE = 18, |
| VHOST_USER_SEND_RARP = 19, |
| VHOST_USER_NET_SET_MTU = 20, |
| VHOST_USER_SET_SLAVE_REQ_FD = 21, |
| VHOST_USER_IOTLB_MSG = 22, |
| VHOST_USER_SET_VRING_ENDIAN = 23, |
| VHOST_USER_GET_CONFIG = 24, |
| VHOST_USER_SET_CONFIG = 25, |
| VHOST_USER_CREATE_CRYPTO_SESSION = 26, |
| VHOST_USER_CLOSE_CRYPTO_SESSION = 27, |
| VHOST_USER_POSTCOPY_ADVISE = 28, |
| VHOST_USER_POSTCOPY_LISTEN = 29, |
| VHOST_USER_POSTCOPY_END = 30, |
| VHOST_USER_GET_INFLIGHT_FD = 31, |
| VHOST_USER_SET_INFLIGHT_FD = 32, |
| VHOST_USER_GPU_SET_SOCKET = 33, |
| VHOST_USER_VRING_KICK = 35, |
| VHOST_USER_GET_MAX_MEM_SLOTS = 36, |
| VHOST_USER_ADD_MEM_REG = 37, |
| VHOST_USER_REM_MEM_REG = 38, |
| VHOST_USER_MAX |
| } VhostUserRequest; |
| |
| typedef enum VhostUserSlaveRequest { |
| VHOST_USER_SLAVE_NONE = 0, |
| VHOST_USER_SLAVE_IOTLB_MSG = 1, |
| VHOST_USER_SLAVE_CONFIG_CHANGE_MSG = 2, |
| VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG = 3, |
| VHOST_USER_SLAVE_VRING_CALL = 4, |
| VHOST_USER_SLAVE_VRING_ERR = 5, |
| VHOST_USER_SLAVE_MAX |
| } VhostUserSlaveRequest; |
| |
| typedef struct VhostUserMemoryRegion { |
| uint64_t guest_phys_addr; |
| uint64_t memory_size; |
| uint64_t userspace_addr; |
| uint64_t mmap_offset; |
| } VhostUserMemoryRegion; |
| |
| typedef struct VhostUserMemory { |
| uint32_t nregions; |
| uint32_t padding; |
| VhostUserMemoryRegion regions[VHOST_MEMORY_BASELINE_NREGIONS]; |
| } VhostUserMemory; |
| |
| typedef struct VhostUserMemRegMsg { |
| uint32_t padding; |
| VhostUserMemoryRegion region; |
| } VhostUserMemRegMsg; |
| |
| typedef struct VhostUserLog { |
| uint64_t mmap_size; |
| uint64_t mmap_offset; |
| } VhostUserLog; |
| |
| typedef struct VhostUserConfig { |
| uint32_t offset; |
| uint32_t size; |
| uint32_t flags; |
| uint8_t region[VHOST_USER_MAX_CONFIG_SIZE]; |
| } VhostUserConfig; |
| |
| static VhostUserConfig c __attribute__ ((unused)); |
| #define VHOST_USER_CONFIG_HDR_SIZE (sizeof(c.offset) \ |
| + sizeof(c.size) \ |
| + sizeof(c.flags)) |
| |
| typedef struct VhostUserVringArea { |
| uint64_t u64; |
| uint64_t size; |
| uint64_t offset; |
| } VhostUserVringArea; |
| |
| typedef struct VhostUserInflight { |
| uint64_t mmap_size; |
| uint64_t mmap_offset; |
| uint16_t num_queues; |
| uint16_t queue_size; |
| } VhostUserInflight; |
| |
| #if defined(_WIN32) && (defined(__x86_64__) || defined(__i386__)) |
| # define VU_PACKED __attribute__((gcc_struct, packed)) |
| #else |
| # define VU_PACKED __attribute__((packed)) |
| #endif |
| |
| typedef struct VhostUserMsg { |
| int request; |
| |
| #define VHOST_USER_VERSION_MASK (0x3) |
| #define VHOST_USER_REPLY_MASK (0x1 << 2) |
| #define VHOST_USER_NEED_REPLY_MASK (0x1 << 3) |
| uint32_t flags; |
| uint32_t size; /* the following payload size */ |
| |
| union { |
| #define VHOST_USER_VRING_IDX_MASK (0xff) |
| #define VHOST_USER_VRING_NOFD_MASK (0x1 << 8) |
| uint64_t u64; |
| struct vhost_vring_state state; |
| struct vhost_vring_addr addr; |
| VhostUserMemory memory; |
| VhostUserMemRegMsg memreg; |
| VhostUserLog log; |
| VhostUserConfig config; |
| VhostUserVringArea area; |
| VhostUserInflight inflight; |
| } payload; |
| |
| int fds[VHOST_MEMORY_BASELINE_NREGIONS]; |
| int fd_num; |
| uint8_t *data; |
| } VU_PACKED VhostUserMsg; |
| |
| typedef struct VuDevRegion { |
| /* Guest Physical address. */ |
| uint64_t gpa; |
| /* Memory region size. */ |
| uint64_t size; |
| /* QEMU virtual address (userspace). */ |
| uint64_t qva; |
| /* Starting offset in our mmaped space. */ |
| uint64_t mmap_offset; |
| /* Start address of mmaped space. */ |
| uint64_t mmap_addr; |
| } VuDevRegion; |
| |
| typedef struct VuDev VuDev; |
| |
| typedef uint64_t (*vu_get_features_cb) (VuDev *dev); |
| typedef void (*vu_set_features_cb) (VuDev *dev, uint64_t features); |
| typedef int (*vu_process_msg_cb) (VuDev *dev, VhostUserMsg *vmsg, |
| int *do_reply); |
| typedef void (*vu_queue_set_started_cb) (VuDev *dev, int qidx, bool started); |
| typedef bool (*vu_queue_is_processed_in_order_cb) (VuDev *dev, int qidx); |
| typedef int (*vu_get_config_cb) (VuDev *dev, uint8_t *config, uint32_t len); |
| typedef int (*vu_set_config_cb) (VuDev *dev, const uint8_t *data, |
| uint32_t offset, uint32_t size, |
| uint32_t flags); |
| |
| typedef struct VuDevIface { |
| /* called by VHOST_USER_GET_FEATURES to get the features bitmask */ |
| vu_get_features_cb get_features; |
| /* enable vhost implementation features */ |
| vu_set_features_cb set_features; |
| /* get the protocol feature bitmask from the underlying vhost |
| * implementation */ |
| vu_get_features_cb get_protocol_features; |
| /* enable protocol features in the underlying vhost implementation. */ |
| vu_set_features_cb set_protocol_features; |
| /* process_msg is called for each vhost-user message received */ |
| /* skip libvhost-user processing if return value != 0 */ |
| vu_process_msg_cb process_msg; |
| /* tells when queues can be processed */ |
| vu_queue_set_started_cb queue_set_started; |
| /* |
| * If the queue is processed in order, in which case it will be |
| * resumed to vring.used->idx. This can help to support resuming |
| * on unmanaged exit/crash. |
| */ |
| vu_queue_is_processed_in_order_cb queue_is_processed_in_order; |
| /* get the config space of the device */ |
| vu_get_config_cb get_config; |
| /* set the config space of the device */ |
| vu_set_config_cb set_config; |
| } VuDevIface; |
| |
| typedef void (*vu_queue_handler_cb) (VuDev *dev, int qidx); |
| |
| typedef struct VuRing { |
| unsigned int num; |
| struct vring_desc *desc; |
| struct vring_avail *avail; |
| struct vring_used *used; |
| uint64_t log_guest_addr; |
| uint32_t flags; |
| } VuRing; |
| |
| typedef struct VuDescStateSplit { |
| /* Indicate whether this descriptor is inflight or not. |
| * Only available for head-descriptor. */ |
| uint8_t inflight; |
| |
| /* Padding */ |
| uint8_t padding[5]; |
| |
| /* Maintain a list for the last batch of used descriptors. |
| * Only available when batching is used for submitting */ |
| uint16_t next; |
| |
| /* Used to preserve the order of fetching available descriptors. |
| * Only available for head-descriptor. */ |
| uint64_t counter; |
| } VuDescStateSplit; |
| |
| typedef struct VuVirtqInflight { |
| /* The feature flags of this region. Now it's initialized to 0. */ |
| uint64_t features; |
| |
| /* The version of this region. It's 1 currently. |
| * Zero value indicates a vm reset happened. */ |
| uint16_t version; |
| |
| /* The size of VuDescStateSplit array. It's equal to the virtqueue |
| * size. Slave could get it from queue size field of VhostUserInflight. */ |
| uint16_t desc_num; |
| |
| /* The head of list that track the last batch of used descriptors. */ |
| uint16_t last_batch_head; |
| |
| /* Storing the idx value of used ring */ |
| uint16_t used_idx; |
| |
| /* Used to track the state of each descriptor in descriptor table */ |
| VuDescStateSplit desc[]; |
| } VuVirtqInflight; |
| |
| typedef struct VuVirtqInflightDesc { |
| uint16_t index; |
| uint64_t counter; |
| } VuVirtqInflightDesc; |
| |
| typedef struct VuVirtq { |
| VuRing vring; |
| |
| VuVirtqInflight *inflight; |
| |
| VuVirtqInflightDesc *resubmit_list; |
| |
| uint16_t resubmit_num; |
| |
| uint64_t counter; |
| |
| /* Next head to pop */ |
| uint16_t last_avail_idx; |
| |
| /* Last avail_idx read from VQ. */ |
| uint16_t shadow_avail_idx; |
| |
| uint16_t used_idx; |
| |
| /* Last used index value we have signalled on */ |
| uint16_t signalled_used; |
| |
| /* Last used index value we have signalled on */ |
| bool signalled_used_valid; |
| |
| /* Notification enabled? */ |
| bool notification; |
| |
| int inuse; |
| |
| vu_queue_handler_cb handler; |
| |
| int call_fd; |
| int kick_fd; |
| int err_fd; |
| unsigned int enable; |
| bool started; |
| |
| /* Guest addresses of our ring */ |
| struct vhost_vring_addr vra; |
| } VuVirtq; |
| |
| enum VuWatchCondtion { |
| VU_WATCH_IN = POLLIN, |
| VU_WATCH_OUT = POLLOUT, |
| VU_WATCH_PRI = POLLPRI, |
| VU_WATCH_ERR = POLLERR, |
| VU_WATCH_HUP = POLLHUP, |
| }; |
| |
| typedef void (*vu_panic_cb) (VuDev *dev, const char *err); |
| typedef void (*vu_watch_cb) (VuDev *dev, int condition, void *data); |
| typedef void (*vu_set_watch_cb) (VuDev *dev, int fd, int condition, |
| vu_watch_cb cb, void *data); |
| typedef void (*vu_remove_watch_cb) (VuDev *dev, int fd); |
| |
| typedef struct VuDevInflightInfo { |
| int fd; |
| void *addr; |
| uint64_t size; |
| } VuDevInflightInfo; |
| |
| struct VuDev { |
| int sock; |
| uint32_t nregions; |
| VuDevRegion regions[VHOST_USER_MAX_RAM_SLOTS]; |
| VuVirtq *vq; |
| VuDevInflightInfo inflight_info; |
| int log_call_fd; |
| /* Must be held while using slave_fd */ |
| pthread_mutex_t slave_mutex; |
| int slave_fd; |
| uint64_t log_size; |
| uint8_t *log_table; |
| uint64_t features; |
| uint64_t protocol_features; |
| bool broken; |
| uint16_t max_queues; |
| |
| /* @set_watch: add or update the given fd to the watch set, |
| * call cb when condition is met */ |
| vu_set_watch_cb set_watch; |
| |
| /* @remove_watch: remove the given fd from the watch set */ |
| vu_remove_watch_cb remove_watch; |
| |
| /* @panic: encountered an unrecoverable error, you may try to |
| * re-initialize */ |
| vu_panic_cb panic; |
| const VuDevIface *iface; |
| |
| /* Postcopy data */ |
| int postcopy_ufd; |
| bool postcopy_listening; |
| }; |
| |
| typedef struct VuVirtqElement { |
| unsigned int index; |
| unsigned int out_num; |
| unsigned int in_num; |
| struct iovec *in_sg; |
| struct iovec *out_sg; |
| } VuVirtqElement; |
| |
| /** |
| * vu_init: |
| * @dev: a VuDev context |
| * @max_queues: maximum number of virtqueues |
| * @socket: the socket connected to vhost-user master |
| * @panic: a panic callback |
| * @set_watch: a set_watch callback |
| * @remove_watch: a remove_watch callback |
| * @iface: a VuDevIface structure with vhost-user device callbacks |
| * |
| * Initializes a VuDev vhost-user context. |
| * |
| * Returns: true on success, false on failure. |
| **/ |
| bool vu_init(VuDev *dev, |
| uint16_t max_queues, |
| int socket, |
| vu_panic_cb panic, |
| vu_set_watch_cb set_watch, |
| vu_remove_watch_cb remove_watch, |
| const VuDevIface *iface); |
| |
| |
| /** |
| * vu_deinit: |
| * @dev: a VuDev context |
| * |
| * Cleans up the VuDev context |
| */ |
| void vu_deinit(VuDev *dev); |
| |
| /** |
| * vu_dispatch: |
| * @dev: a VuDev context |
| * |
| * Process one vhost-user message. |
| * |
| * Returns: TRUE on success, FALSE on failure. |
| */ |
| bool vu_dispatch(VuDev *dev); |
| |
| /** |
| * vu_gpa_to_va: |
| * @dev: a VuDev context |
| * @plen: guest memory size |
| * @guest_addr: guest address |
| * |
| * Translate a guest address to a pointer. Returns NULL on failure. |
| */ |
| void *vu_gpa_to_va(VuDev *dev, uint64_t *plen, uint64_t guest_addr); |
| |
| /** |
| * vu_get_queue: |
| * @dev: a VuDev context |
| * @qidx: queue index |
| * |
| * Returns the queue number @qidx. |
| */ |
| VuVirtq *vu_get_queue(VuDev *dev, int qidx); |
| |
| /** |
| * vu_set_queue_handler: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * @handler: the queue handler callback |
| * |
| * Set the queue handler. This function may be called several times |
| * for the same queue. If called with NULL @handler, the handler is |
| * removed. |
| */ |
| void vu_set_queue_handler(VuDev *dev, VuVirtq *vq, |
| vu_queue_handler_cb handler); |
| |
| /** |
| * vu_set_queue_host_notifier: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * @fd: a file descriptor |
| * @size: host page size |
| * @offset: notifier offset in @fd file |
| * |
| * Set queue's host notifier. This function may be called several |
| * times for the same queue. If called with -1 @fd, the notifier |
| * is removed. |
| */ |
| bool vu_set_queue_host_notifier(VuDev *dev, VuVirtq *vq, int fd, |
| int size, int offset); |
| |
| /** |
| * vu_queue_set_notification: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * @enable: state |
| * |
| * Set whether the queue notifies (via event index or interrupt) |
| */ |
| void vu_queue_set_notification(VuDev *dev, VuVirtq *vq, int enable); |
| |
| /** |
| * vu_queue_enabled: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * |
| * Returns: whether the queue is enabled. |
| */ |
| bool vu_queue_enabled(VuDev *dev, VuVirtq *vq); |
| |
| /** |
| * vu_queue_started: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * |
| * Returns: whether the queue is started. |
| */ |
| bool vu_queue_started(const VuDev *dev, const VuVirtq *vq); |
| |
| /** |
| * vu_queue_empty: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * |
| * Returns: true if the queue is empty or not ready. |
| */ |
| bool vu_queue_empty(VuDev *dev, VuVirtq *vq); |
| |
| /** |
| * vu_queue_notify: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * |
| * Request to notify the queue via callfd (skipped if unnecessary) |
| */ |
| void vu_queue_notify(VuDev *dev, VuVirtq *vq); |
| |
| /** |
| * vu_queue_notify_sync: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * |
| * Request to notify the queue via callfd (skipped if unnecessary) |
| * or sync message if possible. |
| */ |
| void vu_queue_notify_sync(VuDev *dev, VuVirtq *vq); |
| |
| /** |
| * vu_queue_pop: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * @sz: the size of struct to return (must be >= VuVirtqElement) |
| * |
| * Returns: a VuVirtqElement filled from the queue or NULL. The |
| * returned element must be free()-d by the caller. |
| */ |
| void *vu_queue_pop(VuDev *dev, VuVirtq *vq, size_t sz); |
| |
| |
| /** |
| * vu_queue_unpop: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * @elem: The #VuVirtqElement |
| * @len: number of bytes written |
| * |
| * Pretend the most recent element wasn't popped from the virtqueue. The next |
| * call to vu_queue_pop() will refetch the element. |
| */ |
| void vu_queue_unpop(VuDev *dev, VuVirtq *vq, VuVirtqElement *elem, |
| size_t len); |
| |
| /** |
| * vu_queue_rewind: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * @num: number of elements to push back |
| * |
| * Pretend that elements weren't popped from the virtqueue. The next |
| * virtqueue_pop() will refetch the oldest element. |
| * |
| * Returns: true on success, false if @num is greater than the number of in use |
| * elements. |
| */ |
| bool vu_queue_rewind(VuDev *dev, VuVirtq *vq, unsigned int num); |
| |
| /** |
| * vu_queue_fill: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * @elem: a VuVirtqElement |
| * @len: length in bytes to write |
| * @idx: optional offset for the used ring index (0 in general) |
| * |
| * Fill the used ring with @elem element. |
| */ |
| void vu_queue_fill(VuDev *dev, VuVirtq *vq, |
| const VuVirtqElement *elem, |
| unsigned int len, unsigned int idx); |
| |
| /** |
| * vu_queue_push: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * @elem: a VuVirtqElement |
| * @len: length in bytes to write |
| * |
| * Helper that combines vu_queue_fill() with a vu_queue_flush(). |
| */ |
| void vu_queue_push(VuDev *dev, VuVirtq *vq, |
| const VuVirtqElement *elem, unsigned int len); |
| |
| /** |
| * vu_queue_flush: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * @num: number of elements to flush |
| * |
| * Mark the last number of elements as done (used.idx is updated by |
| * num elements). |
| */ |
| void vu_queue_flush(VuDev *dev, VuVirtq *vq, unsigned int num); |
| |
| /** |
| * vu_queue_get_avail_bytes: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * @in_bytes: in bytes |
| * @out_bytes: out bytes |
| * @max_in_bytes: stop counting after max_in_bytes |
| * @max_out_bytes: stop counting after max_out_bytes |
| * |
| * Count the number of available bytes, up to max_in_bytes/max_out_bytes. |
| */ |
| void vu_queue_get_avail_bytes(VuDev *vdev, VuVirtq *vq, unsigned int *in_bytes, |
| unsigned int *out_bytes, |
| unsigned max_in_bytes, unsigned max_out_bytes); |
| |
| /** |
| * vu_queue_avail_bytes: |
| * @dev: a VuDev context |
| * @vq: a VuVirtq queue |
| * @in_bytes: expected in bytes |
| * @out_bytes: expected out bytes |
| * |
| * Returns: true if in_bytes <= in_total && out_bytes <= out_total |
| */ |
| bool vu_queue_avail_bytes(VuDev *dev, VuVirtq *vq, unsigned int in_bytes, |
| unsigned int out_bytes); |
| |
| #endif /* LIBVHOST_USER_H */ |