| /* |
| * QEMU VMware-SVGA "chipset". |
| * |
| * Copyright (c) 2007 Andrzej Zaborowski <balrog@zabor.org> |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "hw.h" |
| #include "console.h" |
| #include "pci.h" |
| |
| #define VERBOSE |
| #define EMBED_STDVGA |
| #undef DIRECT_VRAM |
| #define HW_RECT_ACCEL |
| #define HW_FILL_ACCEL |
| #define HW_MOUSE_ACCEL |
| |
| #ifdef EMBED_STDVGA |
| # include "vga_int.h" |
| #endif |
| |
| struct vmsvga_state_s { |
| #ifdef EMBED_STDVGA |
| VGA_STATE_COMMON |
| #endif |
| |
| int width; |
| int height; |
| int invalidated; |
| int depth; |
| int bypp; |
| int enable; |
| int config; |
| struct { |
| int id; |
| int x; |
| int y; |
| int on; |
| } cursor; |
| |
| #ifndef EMBED_STDVGA |
| DisplayState *ds; |
| int vram_size; |
| ram_addr_t vram_offset; |
| #endif |
| uint8_t *vram; |
| target_phys_addr_t vram_base; |
| |
| int index; |
| int scratch_size; |
| uint32_t *scratch; |
| int new_width; |
| int new_height; |
| uint32_t guest; |
| uint32_t svgaid; |
| uint32_t wred; |
| uint32_t wgreen; |
| uint32_t wblue; |
| int syncing; |
| int fb_size; |
| |
| union { |
| uint32_t *fifo; |
| struct __attribute__((__packed__)) { |
| uint32_t min; |
| uint32_t max; |
| uint32_t next_cmd; |
| uint32_t stop; |
| /* Add registers here when adding capabilities. */ |
| uint32_t fifo[0]; |
| } *cmd; |
| }; |
| |
| #define REDRAW_FIFO_LEN 512 |
| struct vmsvga_rect_s { |
| int x, y, w, h; |
| } redraw_fifo[REDRAW_FIFO_LEN]; |
| int redraw_fifo_first, redraw_fifo_last; |
| }; |
| |
| struct pci_vmsvga_state_s { |
| PCIDevice card; |
| struct vmsvga_state_s chip; |
| }; |
| |
| #define SVGA_MAGIC 0x900000UL |
| #define SVGA_MAKE_ID(ver) (SVGA_MAGIC << 8 | (ver)) |
| #define SVGA_ID_0 SVGA_MAKE_ID(0) |
| #define SVGA_ID_1 SVGA_MAKE_ID(1) |
| #define SVGA_ID_2 SVGA_MAKE_ID(2) |
| |
| #define SVGA_LEGACY_BASE_PORT 0x4560 |
| #define SVGA_INDEX_PORT 0x0 |
| #define SVGA_VALUE_PORT 0x1 |
| #define SVGA_BIOS_PORT 0x2 |
| |
| #define SVGA_VERSION_2 |
| |
| #ifdef SVGA_VERSION_2 |
| # define SVGA_ID SVGA_ID_2 |
| # define SVGA_IO_BASE SVGA_LEGACY_BASE_PORT |
| # define SVGA_IO_MUL 1 |
| # define SVGA_FIFO_SIZE 0x10000 |
| # define SVGA_MEM_BASE 0xe0000000 |
| # define SVGA_PCI_DEVICE_ID PCI_DEVICE_ID_VMWARE_SVGA2 |
| #else |
| # define SVGA_ID SVGA_ID_1 |
| # define SVGA_IO_BASE SVGA_LEGACY_BASE_PORT |
| # define SVGA_IO_MUL 4 |
| # define SVGA_FIFO_SIZE 0x10000 |
| # define SVGA_MEM_BASE 0xe0000000 |
| # define SVGA_PCI_DEVICE_ID PCI_DEVICE_ID_VMWARE_SVGA |
| #endif |
| |
| enum { |
| /* ID 0, 1 and 2 registers */ |
| SVGA_REG_ID = 0, |
| SVGA_REG_ENABLE = 1, |
| SVGA_REG_WIDTH = 2, |
| SVGA_REG_HEIGHT = 3, |
| SVGA_REG_MAX_WIDTH = 4, |
| SVGA_REG_MAX_HEIGHT = 5, |
| SVGA_REG_DEPTH = 6, |
| SVGA_REG_BITS_PER_PIXEL = 7, /* Current bpp in the guest */ |
| SVGA_REG_PSEUDOCOLOR = 8, |
| SVGA_REG_RED_MASK = 9, |
| SVGA_REG_GREEN_MASK = 10, |
| SVGA_REG_BLUE_MASK = 11, |
| SVGA_REG_BYTES_PER_LINE = 12, |
| SVGA_REG_FB_START = 13, |
| SVGA_REG_FB_OFFSET = 14, |
| SVGA_REG_VRAM_SIZE = 15, |
| SVGA_REG_FB_SIZE = 16, |
| |
| /* ID 1 and 2 registers */ |
| SVGA_REG_CAPABILITIES = 17, |
| SVGA_REG_MEM_START = 18, /* Memory for command FIFO */ |
| SVGA_REG_MEM_SIZE = 19, |
| SVGA_REG_CONFIG_DONE = 20, /* Set when memory area configured */ |
| SVGA_REG_SYNC = 21, /* Write to force synchronization */ |
| SVGA_REG_BUSY = 22, /* Read to check if sync is done */ |
| SVGA_REG_GUEST_ID = 23, /* Set guest OS identifier */ |
| SVGA_REG_CURSOR_ID = 24, /* ID of cursor */ |
| SVGA_REG_CURSOR_X = 25, /* Set cursor X position */ |
| SVGA_REG_CURSOR_Y = 26, /* Set cursor Y position */ |
| SVGA_REG_CURSOR_ON = 27, /* Turn cursor on/off */ |
| SVGA_REG_HOST_BITS_PER_PIXEL = 28, /* Current bpp in the host */ |
| SVGA_REG_SCRATCH_SIZE = 29, /* Number of scratch registers */ |
| SVGA_REG_MEM_REGS = 30, /* Number of FIFO registers */ |
| SVGA_REG_NUM_DISPLAYS = 31, /* Number of guest displays */ |
| SVGA_REG_PITCHLOCK = 32, /* Fixed pitch for all modes */ |
| |
| SVGA_PALETTE_BASE = 1024, /* Base of SVGA color map */ |
| SVGA_PALETTE_END = SVGA_PALETTE_BASE + 767, |
| SVGA_SCRATCH_BASE = SVGA_PALETTE_BASE + 768, |
| }; |
| |
| #define SVGA_CAP_NONE 0 |
| #define SVGA_CAP_RECT_FILL (1 << 0) |
| #define SVGA_CAP_RECT_COPY (1 << 1) |
| #define SVGA_CAP_RECT_PAT_FILL (1 << 2) |
| #define SVGA_CAP_LEGACY_OFFSCREEN (1 << 3) |
| #define SVGA_CAP_RASTER_OP (1 << 4) |
| #define SVGA_CAP_CURSOR (1 << 5) |
| #define SVGA_CAP_CURSOR_BYPASS (1 << 6) |
| #define SVGA_CAP_CURSOR_BYPASS_2 (1 << 7) |
| #define SVGA_CAP_8BIT_EMULATION (1 << 8) |
| #define SVGA_CAP_ALPHA_CURSOR (1 << 9) |
| #define SVGA_CAP_GLYPH (1 << 10) |
| #define SVGA_CAP_GLYPH_CLIPPING (1 << 11) |
| #define SVGA_CAP_OFFSCREEN_1 (1 << 12) |
| #define SVGA_CAP_ALPHA_BLEND (1 << 13) |
| #define SVGA_CAP_3D (1 << 14) |
| #define SVGA_CAP_EXTENDED_FIFO (1 << 15) |
| #define SVGA_CAP_MULTIMON (1 << 16) |
| #define SVGA_CAP_PITCHLOCK (1 << 17) |
| |
| /* |
| * FIFO offsets (seen as an array of 32-bit words) |
| */ |
| enum { |
| /* |
| * The original defined FIFO offsets |
| */ |
| SVGA_FIFO_MIN = 0, |
| SVGA_FIFO_MAX, /* The distance from MIN to MAX must be at least 10K */ |
| SVGA_FIFO_NEXT_CMD, |
| SVGA_FIFO_STOP, |
| |
| /* |
| * Additional offsets added as of SVGA_CAP_EXTENDED_FIFO |
| */ |
| SVGA_FIFO_CAPABILITIES = 4, |
| SVGA_FIFO_FLAGS, |
| SVGA_FIFO_FENCE, |
| SVGA_FIFO_3D_HWVERSION, |
| SVGA_FIFO_PITCHLOCK, |
| }; |
| |
| #define SVGA_FIFO_CAP_NONE 0 |
| #define SVGA_FIFO_CAP_FENCE (1 << 0) |
| #define SVGA_FIFO_CAP_ACCELFRONT (1 << 1) |
| #define SVGA_FIFO_CAP_PITCHLOCK (1 << 2) |
| |
| #define SVGA_FIFO_FLAG_NONE 0 |
| #define SVGA_FIFO_FLAG_ACCELFRONT (1 << 0) |
| |
| /* These values can probably be changed arbitrarily. */ |
| #define SVGA_SCRATCH_SIZE 0x8000 |
| #define SVGA_MAX_WIDTH 2360 |
| #define SVGA_MAX_HEIGHT 1770 |
| |
| #ifdef VERBOSE |
| # define GUEST_OS_BASE 0x5001 |
| static const char *vmsvga_guest_id[] = { |
| [0x00 ... 0x15] = "an unknown OS", |
| [0x00] = "Dos", |
| [0x01] = "Windows 3.1", |
| [0x02] = "Windows 95", |
| [0x03] = "Windows 98", |
| [0x04] = "Windows ME", |
| [0x05] = "Windows NT", |
| [0x06] = "Windows 2000", |
| [0x07] = "Linux", |
| [0x08] = "OS/2", |
| [0x0a] = "BSD", |
| [0x0b] = "Whistler", |
| [0x15] = "Windows 2003", |
| }; |
| #endif |
| |
| enum { |
| SVGA_CMD_INVALID_CMD = 0, |
| SVGA_CMD_UPDATE = 1, |
| SVGA_CMD_RECT_FILL = 2, |
| SVGA_CMD_RECT_COPY = 3, |
| SVGA_CMD_DEFINE_BITMAP = 4, |
| SVGA_CMD_DEFINE_BITMAP_SCANLINE = 5, |
| SVGA_CMD_DEFINE_PIXMAP = 6, |
| SVGA_CMD_DEFINE_PIXMAP_SCANLINE = 7, |
| SVGA_CMD_RECT_BITMAP_FILL = 8, |
| SVGA_CMD_RECT_PIXMAP_FILL = 9, |
| SVGA_CMD_RECT_BITMAP_COPY = 10, |
| SVGA_CMD_RECT_PIXMAP_COPY = 11, |
| SVGA_CMD_FREE_OBJECT = 12, |
| SVGA_CMD_RECT_ROP_FILL = 13, |
| SVGA_CMD_RECT_ROP_COPY = 14, |
| SVGA_CMD_RECT_ROP_BITMAP_FILL = 15, |
| SVGA_CMD_RECT_ROP_PIXMAP_FILL = 16, |
| SVGA_CMD_RECT_ROP_BITMAP_COPY = 17, |
| SVGA_CMD_RECT_ROP_PIXMAP_COPY = 18, |
| SVGA_CMD_DEFINE_CURSOR = 19, |
| SVGA_CMD_DISPLAY_CURSOR = 20, |
| SVGA_CMD_MOVE_CURSOR = 21, |
| SVGA_CMD_DEFINE_ALPHA_CURSOR = 22, |
| SVGA_CMD_DRAW_GLYPH = 23, |
| SVGA_CMD_DRAW_GLYPH_CLIPPED = 24, |
| SVGA_CMD_UPDATE_VERBOSE = 25, |
| SVGA_CMD_SURFACE_FILL = 26, |
| SVGA_CMD_SURFACE_COPY = 27, |
| SVGA_CMD_SURFACE_ALPHA_BLEND = 28, |
| SVGA_CMD_FRONT_ROP_FILL = 29, |
| SVGA_CMD_FENCE = 30, |
| }; |
| |
| /* Legal values for the SVGA_REG_CURSOR_ON register in cursor bypass mode */ |
| enum { |
| SVGA_CURSOR_ON_HIDE = 0, |
| SVGA_CURSOR_ON_SHOW = 1, |
| SVGA_CURSOR_ON_REMOVE_FROM_FB = 2, |
| SVGA_CURSOR_ON_RESTORE_TO_FB = 3, |
| }; |
| |
| static inline void vmsvga_update_rect(struct vmsvga_state_s *s, |
| int x, int y, int w, int h) |
| { |
| #ifndef DIRECT_VRAM |
| int line; |
| int bypl; |
| int width; |
| int start; |
| uint8_t *src; |
| uint8_t *dst; |
| |
| if (x + w > s->width) { |
| fprintf(stderr, "%s: update width too large x: %d, w: %d\n", |
| __FUNCTION__, x, w); |
| x = MIN(x, s->width); |
| w = s->width - x; |
| } |
| |
| if (y + h > s->height) { |
| fprintf(stderr, "%s: update height too large y: %d, h: %d\n", |
| __FUNCTION__, y, h); |
| y = MIN(y, s->height); |
| h = s->height - y; |
| } |
| |
| line = h; |
| bypl = s->bypp * s->width; |
| width = s->bypp * w; |
| start = s->bypp * x + bypl * y; |
| src = s->vram + start; |
| dst = ds_get_data(s->ds) + start; |
| |
| for (; line > 0; line --, src += bypl, dst += bypl) |
| memcpy(dst, src, width); |
| #endif |
| |
| dpy_update(s->ds, x, y, w, h); |
| } |
| |
| static inline void vmsvga_update_screen(struct vmsvga_state_s *s) |
| { |
| #ifndef DIRECT_VRAM |
| memcpy(ds_get_data(s->ds), s->vram, s->bypp * s->width * s->height); |
| #endif |
| |
| dpy_update(s->ds, 0, 0, s->width, s->height); |
| } |
| |
| #ifdef DIRECT_VRAM |
| # define vmsvga_update_rect_delayed vmsvga_update_rect |
| #else |
| static inline void vmsvga_update_rect_delayed(struct vmsvga_state_s *s, |
| int x, int y, int w, int h) |
| { |
| struct vmsvga_rect_s *rect = &s->redraw_fifo[s->redraw_fifo_last ++]; |
| s->redraw_fifo_last &= REDRAW_FIFO_LEN - 1; |
| rect->x = x; |
| rect->y = y; |
| rect->w = w; |
| rect->h = h; |
| } |
| #endif |
| |
| static inline void vmsvga_update_rect_flush(struct vmsvga_state_s *s) |
| { |
| struct vmsvga_rect_s *rect; |
| if (s->invalidated) { |
| s->redraw_fifo_first = s->redraw_fifo_last; |
| return; |
| } |
| /* Overlapping region updates can be optimised out here - if someone |
| * knows a smart algorithm to do that, please share. */ |
| while (s->redraw_fifo_first != s->redraw_fifo_last) { |
| rect = &s->redraw_fifo[s->redraw_fifo_first ++]; |
| s->redraw_fifo_first &= REDRAW_FIFO_LEN - 1; |
| vmsvga_update_rect(s, rect->x, rect->y, rect->w, rect->h); |
| } |
| } |
| |
| #ifdef HW_RECT_ACCEL |
| static inline void vmsvga_copy_rect(struct vmsvga_state_s *s, |
| int x0, int y0, int x1, int y1, int w, int h) |
| { |
| # ifdef DIRECT_VRAM |
| uint8_t *vram = ds_get_data(s->ds); |
| # else |
| uint8_t *vram = s->vram; |
| # endif |
| int bypl = s->bypp * s->width; |
| int width = s->bypp * w; |
| int line = h; |
| uint8_t *ptr[2]; |
| |
| # ifdef DIRECT_VRAM |
| if (s->ds->dpy_copy) |
| qemu_console_copy(s->ds, x0, y0, x1, y1, w, h); |
| else |
| # endif |
| { |
| if (y1 > y0) { |
| ptr[0] = vram + s->bypp * x0 + bypl * (y0 + h - 1); |
| ptr[1] = vram + s->bypp * x1 + bypl * (y1 + h - 1); |
| for (; line > 0; line --, ptr[0] -= bypl, ptr[1] -= bypl) |
| memmove(ptr[1], ptr[0], width); |
| } else { |
| ptr[0] = vram + s->bypp * x0 + bypl * y0; |
| ptr[1] = vram + s->bypp * x1 + bypl * y1; |
| for (; line > 0; line --, ptr[0] += bypl, ptr[1] += bypl) |
| memmove(ptr[1], ptr[0], width); |
| } |
| } |
| |
| vmsvga_update_rect_delayed(s, x1, y1, w, h); |
| } |
| #endif |
| |
| #ifdef HW_FILL_ACCEL |
| static inline void vmsvga_fill_rect(struct vmsvga_state_s *s, |
| uint32_t c, int x, int y, int w, int h) |
| { |
| # ifdef DIRECT_VRAM |
| uint8_t *vram = ds_get_data(s->ds); |
| # else |
| uint8_t *vram = s->vram; |
| # endif |
| int bypp = s->bypp; |
| int bypl = bypp * s->width; |
| int width = bypp * w; |
| int line = h; |
| int column; |
| uint8_t *fst = vram + bypp * x + bypl * y; |
| uint8_t *dst; |
| uint8_t *src; |
| uint8_t col[4]; |
| |
| # ifdef DIRECT_VRAM |
| if (s->ds->dpy_fill) |
| s->ds->dpy_fill(s->ds, x, y, w, h, c); |
| else |
| # endif |
| { |
| col[0] = c; |
| col[1] = c >> 8; |
| col[2] = c >> 16; |
| col[3] = c >> 24; |
| |
| if (line --) { |
| dst = fst; |
| src = col; |
| for (column = width; column > 0; column --) { |
| *(dst ++) = *(src ++); |
| if (src - col == bypp) |
| src = col; |
| } |
| dst = fst; |
| for (; line > 0; line --) { |
| dst += bypl; |
| memcpy(dst, fst, width); |
| } |
| } |
| } |
| |
| vmsvga_update_rect_delayed(s, x, y, w, h); |
| } |
| #endif |
| |
| struct vmsvga_cursor_definition_s { |
| int width; |
| int height; |
| int id; |
| int bpp; |
| int hot_x; |
| int hot_y; |
| uint32_t mask[1024]; |
| uint32_t image[1024]; |
| }; |
| |
| #define SVGA_BITMAP_SIZE(w, h) ((((w) + 31) >> 5) * (h)) |
| #define SVGA_PIXMAP_SIZE(w, h, bpp) (((((w) * (bpp)) + 31) >> 5) * (h)) |
| |
| #ifdef HW_MOUSE_ACCEL |
| static inline void vmsvga_cursor_define(struct vmsvga_state_s *s, |
| struct vmsvga_cursor_definition_s *c) |
| { |
| int i; |
| for (i = SVGA_BITMAP_SIZE(c->width, c->height) - 1; i >= 0; i --) |
| c->mask[i] = ~c->mask[i]; |
| |
| if (s->ds->cursor_define) |
| s->ds->cursor_define(c->width, c->height, c->bpp, c->hot_x, c->hot_y, |
| (uint8_t *) c->image, (uint8_t *) c->mask); |
| } |
| #endif |
| |
| #define CMD(f) le32_to_cpu(s->cmd->f) |
| |
| static inline int vmsvga_fifo_empty(struct vmsvga_state_s *s) |
| { |
| if (!s->config || !s->enable) |
| return 1; |
| return (s->cmd->next_cmd == s->cmd->stop); |
| } |
| |
| static inline uint32_t vmsvga_fifo_read_raw(struct vmsvga_state_s *s) |
| { |
| uint32_t cmd = s->fifo[CMD(stop) >> 2]; |
| s->cmd->stop = cpu_to_le32(CMD(stop) + 4); |
| if (CMD(stop) >= CMD(max)) |
| s->cmd->stop = s->cmd->min; |
| return cmd; |
| } |
| |
| static inline uint32_t vmsvga_fifo_read(struct vmsvga_state_s *s) |
| { |
| return le32_to_cpu(vmsvga_fifo_read_raw(s)); |
| } |
| |
| static void vmsvga_fifo_run(struct vmsvga_state_s *s) |
| { |
| uint32_t cmd, colour; |
| int args = 0; |
| int x, y, dx, dy, width, height; |
| struct vmsvga_cursor_definition_s cursor; |
| while (!vmsvga_fifo_empty(s)) |
| switch (cmd = vmsvga_fifo_read(s)) { |
| case SVGA_CMD_UPDATE: |
| case SVGA_CMD_UPDATE_VERBOSE: |
| x = vmsvga_fifo_read(s); |
| y = vmsvga_fifo_read(s); |
| width = vmsvga_fifo_read(s); |
| height = vmsvga_fifo_read(s); |
| vmsvga_update_rect_delayed(s, x, y, width, height); |
| break; |
| |
| case SVGA_CMD_RECT_FILL: |
| colour = vmsvga_fifo_read(s); |
| x = vmsvga_fifo_read(s); |
| y = vmsvga_fifo_read(s); |
| width = vmsvga_fifo_read(s); |
| height = vmsvga_fifo_read(s); |
| #ifdef HW_FILL_ACCEL |
| vmsvga_fill_rect(s, colour, x, y, width, height); |
| break; |
| #else |
| goto badcmd; |
| #endif |
| |
| case SVGA_CMD_RECT_COPY: |
| x = vmsvga_fifo_read(s); |
| y = vmsvga_fifo_read(s); |
| dx = vmsvga_fifo_read(s); |
| dy = vmsvga_fifo_read(s); |
| width = vmsvga_fifo_read(s); |
| height = vmsvga_fifo_read(s); |
| #ifdef HW_RECT_ACCEL |
| vmsvga_copy_rect(s, x, y, dx, dy, width, height); |
| break; |
| #else |
| goto badcmd; |
| #endif |
| |
| case SVGA_CMD_DEFINE_CURSOR: |
| cursor.id = vmsvga_fifo_read(s); |
| cursor.hot_x = vmsvga_fifo_read(s); |
| cursor.hot_y = vmsvga_fifo_read(s); |
| cursor.width = x = vmsvga_fifo_read(s); |
| cursor.height = y = vmsvga_fifo_read(s); |
| vmsvga_fifo_read(s); |
| cursor.bpp = vmsvga_fifo_read(s); |
| for (args = 0; args < SVGA_BITMAP_SIZE(x, y); args ++) |
| cursor.mask[args] = vmsvga_fifo_read_raw(s); |
| for (args = 0; args < SVGA_PIXMAP_SIZE(x, y, cursor.bpp); args ++) |
| cursor.image[args] = vmsvga_fifo_read_raw(s); |
| #ifdef HW_MOUSE_ACCEL |
| vmsvga_cursor_define(s, &cursor); |
| break; |
| #else |
| args = 0; |
| goto badcmd; |
| #endif |
| |
| /* |
| * Other commands that we at least know the number of arguments |
| * for so we can avoid FIFO desync if driver uses them illegally. |
| */ |
| case SVGA_CMD_DEFINE_ALPHA_CURSOR: |
| vmsvga_fifo_read(s); |
| vmsvga_fifo_read(s); |
| vmsvga_fifo_read(s); |
| x = vmsvga_fifo_read(s); |
| y = vmsvga_fifo_read(s); |
| args = x * y; |
| goto badcmd; |
| case SVGA_CMD_RECT_ROP_FILL: |
| args = 6; |
| goto badcmd; |
| case SVGA_CMD_RECT_ROP_COPY: |
| args = 7; |
| goto badcmd; |
| case SVGA_CMD_DRAW_GLYPH_CLIPPED: |
| vmsvga_fifo_read(s); |
| vmsvga_fifo_read(s); |
| args = 7 + (vmsvga_fifo_read(s) >> 2); |
| goto badcmd; |
| case SVGA_CMD_SURFACE_ALPHA_BLEND: |
| args = 12; |
| goto badcmd; |
| |
| /* |
| * Other commands that are not listed as depending on any |
| * CAPABILITIES bits, but are not described in the README either. |
| */ |
| case SVGA_CMD_SURFACE_FILL: |
| case SVGA_CMD_SURFACE_COPY: |
| case SVGA_CMD_FRONT_ROP_FILL: |
| case SVGA_CMD_FENCE: |
| case SVGA_CMD_INVALID_CMD: |
| break; /* Nop */ |
| |
| default: |
| badcmd: |
| while (args --) |
| vmsvga_fifo_read(s); |
| printf("%s: Unknown command 0x%02x in SVGA command FIFO\n", |
| __FUNCTION__, cmd); |
| break; |
| } |
| |
| s->syncing = 0; |
| } |
| |
| static uint32_t vmsvga_index_read(void *opaque, uint32_t address) |
| { |
| struct vmsvga_state_s *s = (struct vmsvga_state_s *) opaque; |
| return s->index; |
| } |
| |
| static void vmsvga_index_write(void *opaque, uint32_t address, uint32_t index) |
| { |
| struct vmsvga_state_s *s = (struct vmsvga_state_s *) opaque; |
| s->index = index; |
| } |
| |
| static uint32_t vmsvga_value_read(void *opaque, uint32_t address) |
| { |
| uint32_t caps; |
| struct vmsvga_state_s *s = (struct vmsvga_state_s *) opaque; |
| switch (s->index) { |
| case SVGA_REG_ID: |
| return s->svgaid; |
| |
| case SVGA_REG_ENABLE: |
| return s->enable; |
| |
| case SVGA_REG_WIDTH: |
| return s->width; |
| |
| case SVGA_REG_HEIGHT: |
| return s->height; |
| |
| case SVGA_REG_MAX_WIDTH: |
| return SVGA_MAX_WIDTH; |
| |
| case SVGA_REG_MAX_HEIGHT: |
| return SVGA_MAX_HEIGHT; |
| |
| case SVGA_REG_DEPTH: |
| return s->depth; |
| |
| case SVGA_REG_BITS_PER_PIXEL: |
| return (s->depth + 7) & ~7; |
| |
| case SVGA_REG_PSEUDOCOLOR: |
| return 0x0; |
| |
| case SVGA_REG_RED_MASK: |
| return s->wred; |
| case SVGA_REG_GREEN_MASK: |
| return s->wgreen; |
| case SVGA_REG_BLUE_MASK: |
| return s->wblue; |
| |
| case SVGA_REG_BYTES_PER_LINE: |
| return ((s->depth + 7) >> 3) * s->new_width; |
| |
| case SVGA_REG_FB_START: |
| return s->vram_base; |
| |
| case SVGA_REG_FB_OFFSET: |
| return 0x0; |
| |
| case SVGA_REG_VRAM_SIZE: |
| return s->vram_size - SVGA_FIFO_SIZE; |
| |
| case SVGA_REG_FB_SIZE: |
| return s->fb_size; |
| |
| case SVGA_REG_CAPABILITIES: |
| caps = SVGA_CAP_NONE; |
| #ifdef HW_RECT_ACCEL |
| caps |= SVGA_CAP_RECT_COPY; |
| #endif |
| #ifdef HW_FILL_ACCEL |
| caps |= SVGA_CAP_RECT_FILL; |
| #endif |
| #ifdef HW_MOUSE_ACCEL |
| if (s->ds->mouse_set) |
| caps |= SVGA_CAP_CURSOR | SVGA_CAP_CURSOR_BYPASS_2 | |
| SVGA_CAP_CURSOR_BYPASS; |
| #endif |
| return caps; |
| |
| case SVGA_REG_MEM_START: |
| return s->vram_base + s->vram_size - SVGA_FIFO_SIZE; |
| |
| case SVGA_REG_MEM_SIZE: |
| return SVGA_FIFO_SIZE; |
| |
| case SVGA_REG_CONFIG_DONE: |
| return s->config; |
| |
| case SVGA_REG_SYNC: |
| case SVGA_REG_BUSY: |
| return s->syncing; |
| |
| case SVGA_REG_GUEST_ID: |
| return s->guest; |
| |
| case SVGA_REG_CURSOR_ID: |
| return s->cursor.id; |
| |
| case SVGA_REG_CURSOR_X: |
| return s->cursor.x; |
| |
| case SVGA_REG_CURSOR_Y: |
| return s->cursor.x; |
| |
| case SVGA_REG_CURSOR_ON: |
| return s->cursor.on; |
| |
| case SVGA_REG_HOST_BITS_PER_PIXEL: |
| return (s->depth + 7) & ~7; |
| |
| case SVGA_REG_SCRATCH_SIZE: |
| return s->scratch_size; |
| |
| case SVGA_REG_MEM_REGS: |
| case SVGA_REG_NUM_DISPLAYS: |
| case SVGA_REG_PITCHLOCK: |
| case SVGA_PALETTE_BASE ... SVGA_PALETTE_END: |
| return 0; |
| |
| default: |
| if (s->index >= SVGA_SCRATCH_BASE && |
| s->index < SVGA_SCRATCH_BASE + s->scratch_size) |
| return s->scratch[s->index - SVGA_SCRATCH_BASE]; |
| printf("%s: Bad register %02x\n", __FUNCTION__, s->index); |
| } |
| |
| return 0; |
| } |
| |
| static void vmsvga_value_write(void *opaque, uint32_t address, uint32_t value) |
| { |
| struct vmsvga_state_s *s = (struct vmsvga_state_s *) opaque; |
| switch (s->index) { |
| case SVGA_REG_ID: |
| if (value == SVGA_ID_2 || value == SVGA_ID_1 || value == SVGA_ID_0) |
| s->svgaid = value; |
| break; |
| |
| case SVGA_REG_ENABLE: |
| s->enable = value; |
| s->config &= !!value; |
| s->width = -1; |
| s->height = -1; |
| s->invalidated = 1; |
| #ifdef EMBED_STDVGA |
| s->invalidate(opaque); |
| #endif |
| if (s->enable) |
| s->fb_size = ((s->depth + 7) >> 3) * s->new_width * s->new_height; |
| break; |
| |
| case SVGA_REG_WIDTH: |
| s->new_width = value; |
| s->invalidated = 1; |
| break; |
| |
| case SVGA_REG_HEIGHT: |
| s->new_height = value; |
| s->invalidated = 1; |
| break; |
| |
| case SVGA_REG_DEPTH: |
| case SVGA_REG_BITS_PER_PIXEL: |
| if (value != s->depth) { |
| printf("%s: Bad colour depth: %i bits\n", __FUNCTION__, value); |
| s->config = 0; |
| } |
| break; |
| |
| case SVGA_REG_CONFIG_DONE: |
| if (value) { |
| s->fifo = (uint32_t *) &s->vram[s->vram_size - SVGA_FIFO_SIZE]; |
| /* Check range and alignment. */ |
| if ((CMD(min) | CMD(max) | |
| CMD(next_cmd) | CMD(stop)) & 3) |
| break; |
| if (CMD(min) < (uint8_t *) s->cmd->fifo - (uint8_t *) s->fifo) |
| break; |
| if (CMD(max) > SVGA_FIFO_SIZE) |
| break; |
| if (CMD(max) < CMD(min) + 10 * 1024) |
| break; |
| } |
| s->config = !!value; |
| break; |
| |
| case SVGA_REG_SYNC: |
| s->syncing = 1; |
| vmsvga_fifo_run(s); /* Or should we just wait for update_display? */ |
| break; |
| |
| case SVGA_REG_GUEST_ID: |
| s->guest = value; |
| #ifdef VERBOSE |
| if (value >= GUEST_OS_BASE && value < GUEST_OS_BASE + |
| ARRAY_SIZE(vmsvga_guest_id)) |
| printf("%s: guest runs %s.\n", __FUNCTION__, |
| vmsvga_guest_id[value - GUEST_OS_BASE]); |
| #endif |
| break; |
| |
| case SVGA_REG_CURSOR_ID: |
| s->cursor.id = value; |
| break; |
| |
| case SVGA_REG_CURSOR_X: |
| s->cursor.x = value; |
| break; |
| |
| case SVGA_REG_CURSOR_Y: |
| s->cursor.y = value; |
| break; |
| |
| case SVGA_REG_CURSOR_ON: |
| s->cursor.on |= (value == SVGA_CURSOR_ON_SHOW); |
| s->cursor.on &= (value != SVGA_CURSOR_ON_HIDE); |
| #ifdef HW_MOUSE_ACCEL |
| if (s->ds->mouse_set && value <= SVGA_CURSOR_ON_SHOW) |
| s->ds->mouse_set(s->cursor.x, s->cursor.y, s->cursor.on); |
| #endif |
| break; |
| |
| case SVGA_REG_MEM_REGS: |
| case SVGA_REG_NUM_DISPLAYS: |
| case SVGA_REG_PITCHLOCK: |
| case SVGA_PALETTE_BASE ... SVGA_PALETTE_END: |
| break; |
| |
| default: |
| if (s->index >= SVGA_SCRATCH_BASE && |
| s->index < SVGA_SCRATCH_BASE + s->scratch_size) { |
| s->scratch[s->index - SVGA_SCRATCH_BASE] = value; |
| break; |
| } |
| printf("%s: Bad register %02x\n", __FUNCTION__, s->index); |
| } |
| } |
| |
| static uint32_t vmsvga_bios_read(void *opaque, uint32_t address) |
| { |
| printf("%s: what are we supposed to return?\n", __FUNCTION__); |
| return 0xcafe; |
| } |
| |
| static void vmsvga_bios_write(void *opaque, uint32_t address, uint32_t data) |
| { |
| printf("%s: what are we supposed to do with (%08x)?\n", |
| __FUNCTION__, data); |
| } |
| |
| static inline void vmsvga_size(struct vmsvga_state_s *s) |
| { |
| if (s->new_width != s->width || s->new_height != s->height) { |
| s->width = s->new_width; |
| s->height = s->new_height; |
| qemu_console_resize(s->ds, s->width, s->height); |
| s->invalidated = 1; |
| } |
| } |
| |
| static void vmsvga_update_display(void *opaque) |
| { |
| struct vmsvga_state_s *s = (struct vmsvga_state_s *) opaque; |
| if (!s->enable) { |
| #ifdef EMBED_STDVGA |
| s->update(opaque); |
| #endif |
| return; |
| } |
| |
| vmsvga_size(s); |
| |
| vmsvga_fifo_run(s); |
| vmsvga_update_rect_flush(s); |
| |
| /* |
| * Is it more efficient to look at vram VGA-dirty bits or wait |
| * for the driver to issue SVGA_CMD_UPDATE? |
| */ |
| if (s->invalidated) { |
| s->invalidated = 0; |
| vmsvga_update_screen(s); |
| } |
| } |
| |
| static void vmsvga_reset(struct vmsvga_state_s *s) |
| { |
| s->index = 0; |
| s->enable = 0; |
| s->config = 0; |
| s->width = -1; |
| s->height = -1; |
| s->svgaid = SVGA_ID; |
| s->depth = 24; |
| s->bypp = (s->depth + 7) >> 3; |
| s->cursor.on = 0; |
| s->redraw_fifo_first = 0; |
| s->redraw_fifo_last = 0; |
| switch (s->depth) { |
| case 8: |
| s->wred = 0x00000007; |
| s->wgreen = 0x00000038; |
| s->wblue = 0x000000c0; |
| break; |
| case 15: |
| s->wred = 0x0000001f; |
| s->wgreen = 0x000003e0; |
| s->wblue = 0x00007c00; |
| break; |
| case 16: |
| s->wred = 0x0000001f; |
| s->wgreen = 0x000007e0; |
| s->wblue = 0x0000f800; |
| break; |
| case 24: |
| s->wred = 0x00ff0000; |
| s->wgreen = 0x0000ff00; |
| s->wblue = 0x000000ff; |
| break; |
| case 32: |
| s->wred = 0x00ff0000; |
| s->wgreen = 0x0000ff00; |
| s->wblue = 0x000000ff; |
| break; |
| } |
| s->syncing = 0; |
| } |
| |
| static void vmsvga_invalidate_display(void *opaque) |
| { |
| struct vmsvga_state_s *s = (struct vmsvga_state_s *) opaque; |
| if (!s->enable) { |
| #ifdef EMBED_STDVGA |
| s->invalidate(opaque); |
| #endif |
| return; |
| } |
| |
| s->invalidated = 1; |
| } |
| |
| /* save the vga display in a PPM image even if no display is |
| available */ |
| static void vmsvga_screen_dump(void *opaque, const char *filename) |
| { |
| struct vmsvga_state_s *s = (struct vmsvga_state_s *) opaque; |
| if (!s->enable) { |
| #ifdef EMBED_STDVGA |
| s->screen_dump(opaque, filename); |
| #endif |
| return; |
| } |
| |
| if (s->depth == 32) { |
| DisplaySurface *ds = qemu_create_displaysurface_from(s->width, |
| s->height, 32, ds_get_linesize(s->ds), s->vram); |
| ppm_save(filename, ds); |
| qemu_free(ds); |
| } |
| } |
| |
| static void vmsvga_text_update(void *opaque, console_ch_t *chardata) |
| { |
| struct vmsvga_state_s *s = (struct vmsvga_state_s *) opaque; |
| |
| if (s->text_update) |
| s->text_update(opaque, chardata); |
| } |
| |
| #ifdef DIRECT_VRAM |
| static uint32_t vmsvga_vram_readb(void *opaque, target_phys_addr_t addr) |
| { |
| struct vmsvga_state_s *s = (struct vmsvga_state_s *) opaque; |
| if (addr < s->fb_size) |
| return *(uint8_t *) (ds_get_data(s->ds) + addr); |
| else |
| return *(uint8_t *) (s->vram + addr); |
| } |
| |
| static uint32_t vmsvga_vram_readw(void *opaque, target_phys_addr_t addr) |
| { |
| struct vmsvga_state_s *s = (struct vmsvga_state_s *) opaque; |
| if (addr < s->fb_size) |
| return *(uint16_t *) (ds_get_data(s->ds) + addr); |
| else |
| return *(uint16_t *) (s->vram + addr); |
| } |
| |
| static uint32_t vmsvga_vram_readl(void *opaque, target_phys_addr_t addr) |
| { |
| struct vmsvga_state_s *s = (struct vmsvga_state_s *) opaque; |
| if (addr < s->fb_size) |
| return *(uint32_t *) (ds_get_data(s->ds) + addr); |
| else |
| return *(uint32_t *) (s->vram + addr); |
| } |
| |
| static void vmsvga_vram_writeb(void *opaque, target_phys_addr_t addr, |
| uint32_t value) |
| { |
| struct vmsvga_state_s *s = (struct vmsvga_state_s *) opaque; |
| if (addr < s->fb_size) |
| *(uint8_t *) (ds_get_data(s->ds) + addr) = value; |
| else |
| *(uint8_t *) (s->vram + addr) = value; |
| } |
| |
| static void vmsvga_vram_writew(void *opaque, target_phys_addr_t addr, |
| uint32_t value) |
| { |
| struct vmsvga_state_s *s = (struct vmsvga_state_s *) opaque; |
| if (addr < s->fb_size) |
| *(uint16_t *) (ds_get_data(s->ds) + addr) = value; |
| else |
| *(uint16_t *) (s->vram + addr) = value; |
| } |
| |
| static void vmsvga_vram_writel(void *opaque, target_phys_addr_t addr, |
| uint32_t value) |
| { |
| struct vmsvga_state_s *s = (struct vmsvga_state_s *) opaque; |
| if (addr < s->fb_size) |
| *(uint32_t *) (ds_get_data(s->ds) + addr) = value; |
| else |
| *(uint32_t *) (s->vram + addr) = value; |
| } |
| |
| static CPUReadMemoryFunc *vmsvga_vram_read[] = { |
| vmsvga_vram_readb, |
| vmsvga_vram_readw, |
| vmsvga_vram_readl, |
| }; |
| |
| static CPUWriteMemoryFunc *vmsvga_vram_write[] = { |
| vmsvga_vram_writeb, |
| vmsvga_vram_writew, |
| vmsvga_vram_writel, |
| }; |
| #endif |
| |
| static void vmsvga_save(struct vmsvga_state_s *s, QEMUFile *f) |
| { |
| qemu_put_be32(f, s->depth); |
| qemu_put_be32(f, s->enable); |
| qemu_put_be32(f, s->config); |
| qemu_put_be32(f, s->cursor.id); |
| qemu_put_be32(f, s->cursor.x); |
| qemu_put_be32(f, s->cursor.y); |
| qemu_put_be32(f, s->cursor.on); |
| qemu_put_be32(f, s->index); |
| qemu_put_buffer(f, (uint8_t *) s->scratch, s->scratch_size * 4); |
| qemu_put_be32(f, s->new_width); |
| qemu_put_be32(f, s->new_height); |
| qemu_put_be32s(f, &s->guest); |
| qemu_put_be32s(f, &s->svgaid); |
| qemu_put_be32(f, s->syncing); |
| qemu_put_be32(f, s->fb_size); |
| } |
| |
| static int vmsvga_load(struct vmsvga_state_s *s, QEMUFile *f) |
| { |
| int depth; |
| depth=qemu_get_be32(f); |
| s->enable=qemu_get_be32(f); |
| s->config=qemu_get_be32(f); |
| s->cursor.id=qemu_get_be32(f); |
| s->cursor.x=qemu_get_be32(f); |
| s->cursor.y=qemu_get_be32(f); |
| s->cursor.on=qemu_get_be32(f); |
| s->index=qemu_get_be32(f); |
| qemu_get_buffer(f, (uint8_t *) s->scratch, s->scratch_size * 4); |
| s->new_width=qemu_get_be32(f); |
| s->new_height=qemu_get_be32(f); |
| qemu_get_be32s(f, &s->guest); |
| qemu_get_be32s(f, &s->svgaid); |
| s->syncing=qemu_get_be32(f); |
| s->fb_size=qemu_get_be32(f); |
| |
| if (s->enable && depth != s->depth) { |
| printf("%s: need colour depth of %i bits to resume operation.\n", |
| __FUNCTION__, depth); |
| return -EINVAL; |
| } |
| |
| s->invalidated = 1; |
| if (s->config) |
| s->fifo = (uint32_t *) &s->vram[s->vram_size - SVGA_FIFO_SIZE]; |
| |
| return 0; |
| } |
| |
| static void vmsvga_init(struct vmsvga_state_s *s, |
| uint8_t *vga_ram_base, unsigned long vga_ram_offset, |
| int vga_ram_size) |
| { |
| s->vram = vga_ram_base; |
| s->vram_size = vga_ram_size; |
| s->vram_offset = vga_ram_offset; |
| |
| s->scratch_size = SVGA_SCRATCH_SIZE; |
| s->scratch = (uint32_t *) qemu_malloc(s->scratch_size * 4); |
| |
| vmsvga_reset(s); |
| |
| #ifdef EMBED_STDVGA |
| vga_common_init((VGAState *) s, |
| vga_ram_base, vga_ram_offset, vga_ram_size); |
| vga_init((VGAState *) s); |
| #endif |
| |
| s->ds = graphic_console_init(vmsvga_update_display, |
| vmsvga_invalidate_display, |
| vmsvga_screen_dump, |
| vmsvga_text_update, s); |
| |
| #ifdef CONFIG_BOCHS_VBE |
| /* XXX: use optimized standard vga accesses */ |
| cpu_register_physical_memory(VBE_DISPI_LFB_PHYSICAL_ADDRESS, |
| vga_ram_size, vga_ram_offset); |
| #endif |
| } |
| |
| static void pci_vmsvga_save(QEMUFile *f, void *opaque) |
| { |
| struct pci_vmsvga_state_s *s = (struct pci_vmsvga_state_s *) opaque; |
| pci_device_save(&s->card, f); |
| vmsvga_save(&s->chip, f); |
| } |
| |
| static int pci_vmsvga_load(QEMUFile *f, void *opaque, int version_id) |
| { |
| struct pci_vmsvga_state_s *s = (struct pci_vmsvga_state_s *) opaque; |
| int ret; |
| |
| ret = pci_device_load(&s->card, f); |
| if (ret < 0) |
| return ret; |
| |
| ret = vmsvga_load(&s->chip, f); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void pci_vmsvga_map_ioport(PCIDevice *pci_dev, int region_num, |
| uint32_t addr, uint32_t size, int type) |
| { |
| struct pci_vmsvga_state_s *d = (struct pci_vmsvga_state_s *) pci_dev; |
| struct vmsvga_state_s *s = &d->chip; |
| |
| register_ioport_read(addr + SVGA_IO_MUL * SVGA_INDEX_PORT, |
| 1, 4, vmsvga_index_read, s); |
| register_ioport_write(addr + SVGA_IO_MUL * SVGA_INDEX_PORT, |
| 1, 4, vmsvga_index_write, s); |
| register_ioport_read(addr + SVGA_IO_MUL * SVGA_VALUE_PORT, |
| 1, 4, vmsvga_value_read, s); |
| register_ioport_write(addr + SVGA_IO_MUL * SVGA_VALUE_PORT, |
| 1, 4, vmsvga_value_write, s); |
| register_ioport_read(addr + SVGA_IO_MUL * SVGA_BIOS_PORT, |
| 1, 4, vmsvga_bios_read, s); |
| register_ioport_write(addr + SVGA_IO_MUL * SVGA_BIOS_PORT, |
| 1, 4, vmsvga_bios_write, s); |
| } |
| |
| static void pci_vmsvga_map_mem(PCIDevice *pci_dev, int region_num, |
| uint32_t addr, uint32_t size, int type) |
| { |
| struct pci_vmsvga_state_s *d = (struct pci_vmsvga_state_s *) pci_dev; |
| struct vmsvga_state_s *s = &d->chip; |
| ram_addr_t iomemtype; |
| |
| s->vram_base = addr; |
| #ifdef DIRECT_VRAM |
| iomemtype = cpu_register_io_memory(0, vmsvga_vram_read, |
| vmsvga_vram_write, s); |
| #else |
| iomemtype = s->vram_offset | IO_MEM_RAM; |
| #endif |
| cpu_register_physical_memory(s->vram_base, s->vram_size, |
| iomemtype); |
| } |
| |
| #define PCI_CLASS_HEADERTYPE_00h 0x00 |
| |
| void pci_vmsvga_init(PCIBus *bus, uint8_t *vga_ram_base, |
| unsigned long vga_ram_offset, int vga_ram_size) |
| { |
| struct pci_vmsvga_state_s *s; |
| |
| /* Setup PCI configuration */ |
| s = (struct pci_vmsvga_state_s *) |
| pci_register_device(bus, "QEMUware SVGA", |
| sizeof(struct pci_vmsvga_state_s), -1, 0, 0); |
| pci_config_set_vendor_id(s->card.config, PCI_VENDOR_ID_VMWARE); |
| pci_config_set_device_id(s->card.config, SVGA_PCI_DEVICE_ID); |
| s->card.config[PCI_COMMAND] = 0x07; /* I/O + Memory */ |
| pci_config_set_class(s->card.config, PCI_CLASS_DISPLAY_VGA); |
| s->card.config[0x0c] = 0x08; /* Cache line size */ |
| s->card.config[0x0d] = 0x40; /* Latency timer */ |
| s->card.config[0x0e] = PCI_CLASS_HEADERTYPE_00h; |
| s->card.config[0x2c] = PCI_VENDOR_ID_VMWARE & 0xff; |
| s->card.config[0x2d] = PCI_VENDOR_ID_VMWARE >> 8; |
| s->card.config[0x2e] = SVGA_PCI_DEVICE_ID & 0xff; |
| s->card.config[0x2f] = SVGA_PCI_DEVICE_ID >> 8; |
| s->card.config[0x3c] = 0xff; /* End */ |
| |
| pci_register_io_region(&s->card, 0, 0x10, |
| PCI_ADDRESS_SPACE_IO, pci_vmsvga_map_ioport); |
| pci_register_io_region(&s->card, 1, vga_ram_size, |
| PCI_ADDRESS_SPACE_MEM_PREFETCH, pci_vmsvga_map_mem); |
| |
| vmsvga_init(&s->chip, vga_ram_base, vga_ram_offset, vga_ram_size); |
| |
| register_savevm("vmware_vga", 0, 0, pci_vmsvga_save, pci_vmsvga_load, s); |
| } |