| /* |
| * QEMU buffered QEMUFile |
| * |
| * Copyright IBM, Corp. 2008 |
| * |
| * Authors: |
| * Anthony Liguori <aliguori@us.ibm.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. See |
| * the COPYING file in the top-level directory. |
| * |
| */ |
| |
| #include "qemu-common.h" |
| #include "hw/hw.h" |
| #include "qemu-timer.h" |
| #include "sysemu.h" |
| #include "qemu-char.h" |
| #include "buffered_file.h" |
| |
| //#define DEBUG_BUFFERED_FILE |
| |
| typedef struct QEMUFileBuffered |
| { |
| BufferedPutFunc *put_buffer; |
| BufferedPutReadyFunc *put_ready; |
| BufferedWaitForUnfreezeFunc *wait_for_unfreeze; |
| BufferedCloseFunc *close; |
| void *opaque; |
| QEMUFile *file; |
| int has_error; |
| int freeze_output; |
| size_t bytes_xfer; |
| size_t xfer_limit; |
| uint8_t *buffer; |
| size_t buffer_size; |
| size_t buffer_capacity; |
| QEMUTimer *timer; |
| } QEMUFileBuffered; |
| |
| #ifdef DEBUG_BUFFERED_FILE |
| #define dprintf(fmt, ...) \ |
| do { printf("buffered-file: " fmt, ## __VA_ARGS__); } while (0) |
| #else |
| #define dprintf(fmt, ...) \ |
| do { } while (0) |
| #endif |
| |
| static void buffered_append(QEMUFileBuffered *s, |
| const uint8_t *buf, size_t size) |
| { |
| if (size > (s->buffer_capacity - s->buffer_size)) { |
| void *tmp; |
| |
| dprintf("increasing buffer capacity from %ld by %ld\n", |
| s->buffer_capacity, size + 1024); |
| |
| s->buffer_capacity += size + 1024; |
| |
| tmp = qemu_realloc(s->buffer, s->buffer_capacity); |
| if (tmp == NULL) { |
| fprintf(stderr, "qemu file buffer expansion failed\n"); |
| exit(1); |
| } |
| |
| s->buffer = tmp; |
| } |
| |
| memcpy(s->buffer + s->buffer_size, buf, size); |
| s->buffer_size += size; |
| } |
| |
| static void buffered_flush(QEMUFileBuffered *s) |
| { |
| size_t offset = 0; |
| |
| if (s->has_error) { |
| dprintf("flush when error, bailing\n"); |
| return; |
| } |
| |
| dprintf("flushing %ld byte(s) of data\n", s->buffer_size); |
| |
| while (offset < s->buffer_size) { |
| ssize_t ret; |
| |
| ret = s->put_buffer(s->opaque, s->buffer + offset, |
| s->buffer_size - offset); |
| if (ret == -EAGAIN) { |
| dprintf("backend not ready, freezing\n"); |
| s->freeze_output = 1; |
| break; |
| } |
| |
| if (ret <= 0) { |
| dprintf("error flushing data, %ld\n", ret); |
| s->has_error = 1; |
| break; |
| } else { |
| dprintf("flushed %ld byte(s)\n", ret); |
| offset += ret; |
| } |
| } |
| |
| dprintf("flushed %ld of %ld byte(s)\n", offset, s->buffer_size); |
| memmove(s->buffer, s->buffer + offset, s->buffer_size - offset); |
| s->buffer_size -= offset; |
| } |
| |
| static int buffered_put_buffer(void *opaque, const uint8_t *buf, int64_t pos, int size) |
| { |
| QEMUFileBuffered *s = opaque; |
| int offset = 0; |
| ssize_t ret; |
| |
| dprintf("putting %ld bytes at %Ld\n", size, pos); |
| |
| if (s->has_error) { |
| dprintf("flush when error, bailing\n"); |
| return -EINVAL; |
| } |
| |
| dprintf("unfreezing output\n"); |
| s->freeze_output = 0; |
| |
| buffered_flush(s); |
| |
| while (!s->freeze_output && offset < size) { |
| if (s->bytes_xfer > s->xfer_limit) { |
| dprintf("transfer limit exceeded when putting\n"); |
| break; |
| } |
| |
| ret = s->put_buffer(s->opaque, buf + offset, size - offset); |
| if (ret == -EAGAIN) { |
| dprintf("backend not ready, freezing\n"); |
| s->freeze_output = 1; |
| break; |
| } |
| |
| if (ret <= 0) { |
| dprintf("error putting\n"); |
| s->has_error = 1; |
| offset = -EINVAL; |
| break; |
| } |
| |
| dprintf("put %ld byte(s)\n", ret); |
| offset += ret; |
| s->bytes_xfer += ret; |
| } |
| |
| if (offset >= 0) { |
| dprintf("buffering %ld bytes\n", size - offset); |
| buffered_append(s, buf + offset, size - offset); |
| offset = size; |
| } |
| |
| return offset; |
| } |
| |
| static int buffered_close(void *opaque) |
| { |
| QEMUFileBuffered *s = opaque; |
| int ret; |
| |
| dprintf("closing\n"); |
| |
| while (!s->has_error && s->buffer_size) { |
| buffered_flush(s); |
| if (s->freeze_output) |
| s->wait_for_unfreeze(s); |
| } |
| |
| ret = s->close(s->opaque); |
| |
| qemu_del_timer(s->timer); |
| qemu_free_timer(s->timer); |
| qemu_free(s->buffer); |
| qemu_free(s); |
| |
| return ret; |
| } |
| |
| static int buffered_rate_limit(void *opaque) |
| { |
| QEMUFileBuffered *s = opaque; |
| |
| if (s->has_error) |
| return 0; |
| |
| if (s->freeze_output) |
| return 1; |
| |
| if (s->bytes_xfer > s->xfer_limit) |
| return 1; |
| |
| return 0; |
| } |
| |
| static void buffered_rate_tick(void *opaque) |
| { |
| QEMUFileBuffered *s = opaque; |
| |
| if (s->has_error) |
| return; |
| |
| qemu_mod_timer(s->timer, qemu_get_clock(rt_clock) + 100); |
| |
| if (s->freeze_output) |
| return; |
| |
| s->bytes_xfer = 0; |
| |
| buffered_flush(s); |
| |
| /* Add some checks around this */ |
| s->put_ready(s->opaque); |
| } |
| |
| QEMUFile *qemu_fopen_ops_buffered(void *opaque, |
| size_t bytes_per_sec, |
| BufferedPutFunc *put_buffer, |
| BufferedPutReadyFunc *put_ready, |
| BufferedWaitForUnfreezeFunc *wait_for_unfreeze, |
| BufferedCloseFunc *close) |
| { |
| QEMUFileBuffered *s; |
| |
| s = qemu_mallocz(sizeof(*s)); |
| |
| s->opaque = opaque; |
| s->xfer_limit = bytes_per_sec / 10; |
| s->put_buffer = put_buffer; |
| s->put_ready = put_ready; |
| s->wait_for_unfreeze = wait_for_unfreeze; |
| s->close = close; |
| |
| s->file = qemu_fopen_ops(s, buffered_put_buffer, NULL, |
| buffered_close, buffered_rate_limit); |
| |
| s->timer = qemu_new_timer(rt_clock, buffered_rate_tick, s); |
| |
| qemu_mod_timer(s->timer, qemu_get_clock(rt_clock) + 100); |
| |
| return s->file; |
| } |