| /* |
| * QEMU IDE Emulation: PCI cmd646 support. |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * Copyright (c) 2006 Openedhand Ltd. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include <hw/hw.h> |
| #include <hw/i386/pc.h> |
| #include <hw/pci/pci.h> |
| #include <hw/isa/isa.h> |
| #include "block/block.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/dma.h" |
| |
| #include <hw/ide/pci.h> |
| |
| /* CMD646 specific */ |
| #define MRDMODE 0x71 |
| #define MRDMODE_INTR_CH0 0x04 |
| #define MRDMODE_INTR_CH1 0x08 |
| #define MRDMODE_BLK_CH0 0x10 |
| #define MRDMODE_BLK_CH1 0x20 |
| #define UDIDETCR0 0x73 |
| #define UDIDETCR1 0x7B |
| |
| static void cmd646_update_irq(PCIIDEState *d); |
| |
| static uint64_t cmd646_cmd_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| CMD646BAR *cmd646bar = opaque; |
| |
| if (addr != 2 || size != 1) { |
| return ((uint64_t)1 << (size * 8)) - 1; |
| } |
| return ide_status_read(cmd646bar->bus, addr + 2); |
| } |
| |
| static void cmd646_cmd_write(void *opaque, hwaddr addr, |
| uint64_t data, unsigned size) |
| { |
| CMD646BAR *cmd646bar = opaque; |
| |
| if (addr != 2 || size != 1) { |
| return; |
| } |
| ide_cmd_write(cmd646bar->bus, addr + 2, data); |
| } |
| |
| static const MemoryRegionOps cmd646_cmd_ops = { |
| .read = cmd646_cmd_read, |
| .write = cmd646_cmd_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static uint64_t cmd646_data_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| CMD646BAR *cmd646bar = opaque; |
| |
| if (size == 1) { |
| return ide_ioport_read(cmd646bar->bus, addr); |
| } else if (addr == 0) { |
| if (size == 2) { |
| return ide_data_readw(cmd646bar->bus, addr); |
| } else { |
| return ide_data_readl(cmd646bar->bus, addr); |
| } |
| } |
| return ((uint64_t)1 << (size * 8)) - 1; |
| } |
| |
| static void cmd646_data_write(void *opaque, hwaddr addr, |
| uint64_t data, unsigned size) |
| { |
| CMD646BAR *cmd646bar = opaque; |
| |
| if (size == 1) { |
| ide_ioport_write(cmd646bar->bus, addr, data); |
| } else if (addr == 0) { |
| if (size == 2) { |
| ide_data_writew(cmd646bar->bus, addr, data); |
| } else { |
| ide_data_writel(cmd646bar->bus, addr, data); |
| } |
| } |
| } |
| |
| static const MemoryRegionOps cmd646_data_ops = { |
| .read = cmd646_data_read, |
| .write = cmd646_data_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static void setup_cmd646_bar(PCIIDEState *d, int bus_num) |
| { |
| IDEBus *bus = &d->bus[bus_num]; |
| CMD646BAR *bar = &d->cmd646_bar[bus_num]; |
| |
| bar->bus = bus; |
| bar->pci_dev = d; |
| memory_region_init_io(&bar->cmd, OBJECT(d), &cmd646_cmd_ops, bar, |
| "cmd646-cmd", 4); |
| memory_region_init_io(&bar->data, OBJECT(d), &cmd646_data_ops, bar, |
| "cmd646-data", 8); |
| } |
| |
| static uint64_t bmdma_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| BMDMAState *bm = opaque; |
| PCIDevice *pci_dev = PCI_DEVICE(bm->pci_dev); |
| uint32_t val; |
| |
| if (size != 1) { |
| return ((uint64_t)1 << (size * 8)) - 1; |
| } |
| |
| switch(addr & 3) { |
| case 0: |
| val = bm->cmd; |
| break; |
| case 1: |
| val = pci_dev->config[MRDMODE]; |
| break; |
| case 2: |
| val = bm->status; |
| break; |
| case 3: |
| if (bm == &bm->pci_dev->bmdma[0]) { |
| val = pci_dev->config[UDIDETCR0]; |
| } else { |
| val = pci_dev->config[UDIDETCR1]; |
| } |
| break; |
| default: |
| val = 0xff; |
| break; |
| } |
| #ifdef DEBUG_IDE |
| printf("bmdma: readb " TARGET_FMT_plx " : 0x%02x\n", addr, val); |
| #endif |
| return val; |
| } |
| |
| static void bmdma_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| BMDMAState *bm = opaque; |
| PCIDevice *pci_dev = PCI_DEVICE(bm->pci_dev); |
| |
| if (size != 1) { |
| return; |
| } |
| |
| #ifdef DEBUG_IDE |
| printf("bmdma: writeb " TARGET_FMT_plx " : 0x%" PRIx64 "\n", addr, val); |
| #endif |
| switch(addr & 3) { |
| case 0: |
| bmdma_cmd_writeb(bm, val); |
| break; |
| case 1: |
| pci_dev->config[MRDMODE] = |
| (pci_dev->config[MRDMODE] & ~0x30) | (val & 0x30); |
| cmd646_update_irq(bm->pci_dev); |
| break; |
| case 2: |
| bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06); |
| break; |
| case 3: |
| if (bm == &bm->pci_dev->bmdma[0]) { |
| pci_dev->config[UDIDETCR0] = val; |
| } else { |
| pci_dev->config[UDIDETCR1] = val; |
| } |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps cmd646_bmdma_ops = { |
| .read = bmdma_read, |
| .write = bmdma_write, |
| }; |
| |
| static void bmdma_setup_bar(PCIIDEState *d) |
| { |
| BMDMAState *bm; |
| int i; |
| |
| memory_region_init(&d->bmdma_bar, OBJECT(d), "cmd646-bmdma", 16); |
| for(i = 0;i < 2; i++) { |
| bm = &d->bmdma[i]; |
| memory_region_init_io(&bm->extra_io, OBJECT(d), &cmd646_bmdma_ops, bm, |
| "cmd646-bmdma-bus", 4); |
| memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io); |
| memory_region_init_io(&bm->addr_ioport, OBJECT(d), |
| &bmdma_addr_ioport_ops, bm, |
| "cmd646-bmdma-ioport", 4); |
| memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport); |
| } |
| } |
| |
| /* XXX: call it also when the MRDMODE is changed from the PCI config |
| registers */ |
| static void cmd646_update_irq(PCIIDEState *d) |
| { |
| PCIDevice *pd = PCI_DEVICE(d); |
| int pci_level; |
| |
| pci_level = ((pd->config[MRDMODE] & MRDMODE_INTR_CH0) && |
| !(pd->config[MRDMODE] & MRDMODE_BLK_CH0)) || |
| ((pd->config[MRDMODE] & MRDMODE_INTR_CH1) && |
| !(pd->config[MRDMODE] & MRDMODE_BLK_CH1)); |
| pci_set_irq(pd, pci_level); |
| } |
| |
| /* the PCI irq level is the logical OR of the two channels */ |
| static void cmd646_set_irq(void *opaque, int channel, int level) |
| { |
| PCIIDEState *d = opaque; |
| PCIDevice *pd = PCI_DEVICE(d); |
| int irq_mask; |
| |
| irq_mask = MRDMODE_INTR_CH0 << channel; |
| if (level) { |
| pd->config[MRDMODE] |= irq_mask; |
| } else { |
| pd->config[MRDMODE] &= ~irq_mask; |
| } |
| cmd646_update_irq(d); |
| } |
| |
| static void cmd646_reset(void *opaque) |
| { |
| PCIIDEState *d = opaque; |
| unsigned int i; |
| |
| for (i = 0; i < 2; i++) { |
| ide_bus_reset(&d->bus[i]); |
| } |
| } |
| |
| /* CMD646 PCI IDE controller */ |
| static int pci_cmd646_ide_initfn(PCIDevice *dev) |
| { |
| PCIIDEState *d = PCI_IDE(dev); |
| uint8_t *pci_conf = dev->config; |
| qemu_irq *irq; |
| int i; |
| |
| pci_conf[PCI_CLASS_PROG] = 0x8f; |
| |
| pci_conf[0x51] = 0x04; // enable IDE0 |
| if (d->secondary) { |
| /* XXX: if not enabled, really disable the seconday IDE controller */ |
| pci_conf[0x51] |= 0x08; /* enable IDE1 */ |
| } |
| |
| setup_cmd646_bar(d, 0); |
| setup_cmd646_bar(d, 1); |
| pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd646_bar[0].data); |
| pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd646_bar[0].cmd); |
| pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd646_bar[1].data); |
| pci_register_bar(dev, 3, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd646_bar[1].cmd); |
| bmdma_setup_bar(d); |
| pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar); |
| |
| /* TODO: RST# value should be 0 */ |
| pci_conf[PCI_INTERRUPT_PIN] = 0x01; // interrupt on pin 1 |
| |
| irq = qemu_allocate_irqs(cmd646_set_irq, d, 2); |
| for (i = 0; i < 2; i++) { |
| ide_bus_new(&d->bus[i], sizeof(d->bus[i]), DEVICE(dev), i, 2); |
| ide_init2(&d->bus[i], irq[i]); |
| |
| bmdma_init(&d->bus[i], &d->bmdma[i], d); |
| d->bmdma[i].bus = &d->bus[i]; |
| qemu_add_vm_change_state_handler(d->bus[i].dma->ops->restart_cb, |
| &d->bmdma[i].dma); |
| } |
| |
| vmstate_register(DEVICE(dev), 0, &vmstate_ide_pci, d); |
| qemu_register_reset(cmd646_reset, d); |
| return 0; |
| } |
| |
| static void pci_cmd646_ide_exitfn(PCIDevice *dev) |
| { |
| PCIIDEState *d = PCI_IDE(dev); |
| unsigned i; |
| |
| for (i = 0; i < 2; ++i) { |
| memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io); |
| memory_region_destroy(&d->bmdma[i].extra_io); |
| memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport); |
| memory_region_destroy(&d->bmdma[i].addr_ioport); |
| memory_region_destroy(&d->cmd646_bar[i].cmd); |
| memory_region_destroy(&d->cmd646_bar[i].data); |
| } |
| memory_region_destroy(&d->bmdma_bar); |
| } |
| |
| void pci_cmd646_ide_init(PCIBus *bus, DriveInfo **hd_table, |
| int secondary_ide_enabled) |
| { |
| PCIDevice *dev; |
| |
| dev = pci_create(bus, -1, "cmd646-ide"); |
| qdev_prop_set_uint32(&dev->qdev, "secondary", secondary_ide_enabled); |
| qdev_init_nofail(&dev->qdev); |
| |
| pci_ide_create_devs(dev, hd_table); |
| } |
| |
| static Property cmd646_ide_properties[] = { |
| DEFINE_PROP_UINT32("secondary", PCIIDEState, secondary, 0), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void cmd646_ide_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->init = pci_cmd646_ide_initfn; |
| k->exit = pci_cmd646_ide_exitfn; |
| k->vendor_id = PCI_VENDOR_ID_CMD; |
| k->device_id = PCI_DEVICE_ID_CMD_646; |
| k->revision = 0x07; |
| k->class_id = PCI_CLASS_STORAGE_IDE; |
| dc->props = cmd646_ide_properties; |
| } |
| |
| static const TypeInfo cmd646_ide_info = { |
| .name = "cmd646-ide", |
| .parent = TYPE_PCI_IDE, |
| .class_init = cmd646_ide_class_init, |
| }; |
| |
| static void cmd646_ide_register_types(void) |
| { |
| type_register_static(&cmd646_ide_info); |
| } |
| |
| type_init(cmd646_ide_register_types) |