|  | /* | 
|  | * QTest testcase for e1000e NIC | 
|  | * | 
|  | * Copyright (c) 2015 Ravello Systems LTD (http://ravellosystems.com) | 
|  | * Developed by Daynix Computing LTD (http://www.daynix.com) | 
|  | * | 
|  | * Authors: | 
|  | * Dmitry Fleytman <dmitry@daynix.com> | 
|  | * Leonid Bloch <leonid@daynix.com> | 
|  | * Yan Vugenfirer <yan@daynix.com> | 
|  | * | 
|  | * This library is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU Lesser General Public | 
|  | * License as published by the Free Software Foundation; either | 
|  | * version 2.1 of the License, or (at your option) any later version. | 
|  | * | 
|  | * This library is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * Lesser General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU Lesser General Public | 
|  | * License along with this library; if not, see <http://www.gnu.org/licenses/>. | 
|  | */ | 
|  |  | 
|  |  | 
|  | #include "qemu/osdep.h" | 
|  | #include "libqtest-single.h" | 
|  | #include "libqos/pci-pc.h" | 
|  | #include "net/eth.h" | 
|  | #include "qemu/sockets.h" | 
|  | #include "qemu/iov.h" | 
|  | #include "qemu/module.h" | 
|  | #include "qemu/bitops.h" | 
|  | #include "libqos/libqos-malloc.h" | 
|  | #include "libqos/e1000e.h" | 
|  | #include "hw/net/e1000_regs.h" | 
|  |  | 
|  | static const struct eth_header packet = { | 
|  | .h_dest = E1000E_ADDRESS, | 
|  | .h_source = E1000E_ADDRESS, | 
|  | }; | 
|  |  | 
|  | static void e1000e_send_verify(QE1000E *d, int *test_sockets, QGuestAllocator *alloc) | 
|  | { | 
|  | struct e1000_tx_desc descr; | 
|  | char buffer[64]; | 
|  | int ret; | 
|  | uint32_t recv_len; | 
|  |  | 
|  | /* Prepare test data buffer */ | 
|  | uint64_t data = guest_alloc(alloc, sizeof(buffer)); | 
|  | memwrite(data, &packet, sizeof(packet)); | 
|  |  | 
|  | /* Prepare TX descriptor */ | 
|  | memset(&descr, 0, sizeof(descr)); | 
|  | descr.buffer_addr = cpu_to_le64(data); | 
|  | descr.lower.data = cpu_to_le32(E1000_TXD_CMD_RS   | | 
|  | E1000_TXD_CMD_EOP  | | 
|  | E1000_TXD_CMD_DEXT | | 
|  | E1000_TXD_DTYP_D   | | 
|  | sizeof(buffer)); | 
|  |  | 
|  | /* Put descriptor to the ring */ | 
|  | e1000e_tx_ring_push(d, &descr); | 
|  |  | 
|  | /* Wait for TX WB interrupt */ | 
|  | e1000e_wait_isr(d, E1000E_TX0_MSG_ID); | 
|  |  | 
|  | /* Check DD bit */ | 
|  | g_assert_cmphex(le32_to_cpu(descr.upper.data) & E1000_TXD_STAT_DD, ==, | 
|  | E1000_TXD_STAT_DD); | 
|  |  | 
|  | /* Check data sent to the backend */ | 
|  | ret = recv(test_sockets[0], &recv_len, sizeof(recv_len), 0); | 
|  | g_assert_cmpint(ret, == , sizeof(recv_len)); | 
|  | ret = recv(test_sockets[0], buffer, sizeof(buffer), 0); | 
|  | g_assert_cmpint(ret, ==, sizeof(buffer)); | 
|  | g_assert_false(memcmp(buffer, &packet, sizeof(packet))); | 
|  |  | 
|  | /* Free test data buffer */ | 
|  | guest_free(alloc, data); | 
|  | } | 
|  |  | 
|  | static void e1000e_receive_verify(QE1000E *d, int *test_sockets, QGuestAllocator *alloc) | 
|  | { | 
|  | union e1000_rx_desc_extended descr; | 
|  |  | 
|  | struct eth_header test_iov = packet; | 
|  | int len = htonl(sizeof(packet)); | 
|  | struct iovec iov[] = { | 
|  | { | 
|  | .iov_base = &len, | 
|  | .iov_len = sizeof(len), | 
|  | },{ | 
|  | .iov_base = &test_iov, | 
|  | .iov_len = sizeof(packet), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | char buffer[64]; | 
|  | int ret; | 
|  |  | 
|  | /* Send a dummy packet to device's socket*/ | 
|  | ret = iov_send(test_sockets[0], iov, 2, 0, sizeof(len) + sizeof(packet)); | 
|  | g_assert_cmpint(ret, == , sizeof(packet) + sizeof(len)); | 
|  |  | 
|  | /* Prepare test data buffer */ | 
|  | uint64_t data = guest_alloc(alloc, sizeof(buffer)); | 
|  |  | 
|  | /* Prepare RX descriptor */ | 
|  | memset(&descr, 0, sizeof(descr)); | 
|  | descr.read.buffer_addr = cpu_to_le64(data); | 
|  |  | 
|  | /* Put descriptor to the ring */ | 
|  | e1000e_rx_ring_push(d, &descr); | 
|  |  | 
|  | /* Wait for TX WB interrupt */ | 
|  | e1000e_wait_isr(d, E1000E_RX0_MSG_ID); | 
|  |  | 
|  | /* Check DD bit */ | 
|  | g_assert_cmphex(le32_to_cpu(descr.wb.upper.status_error) & | 
|  | E1000_RXD_STAT_DD, ==, E1000_RXD_STAT_DD); | 
|  |  | 
|  | /* Check data sent to the backend */ | 
|  | memread(data, buffer, sizeof(buffer)); | 
|  | g_assert_false(memcmp(buffer, &packet, sizeof(packet))); | 
|  |  | 
|  | /* Free test data buffer */ | 
|  | guest_free(alloc, data); | 
|  | } | 
|  |  | 
|  | static void test_e1000e_init(void *obj, void *data, QGuestAllocator * alloc) | 
|  | { | 
|  | /* init does nothing */ | 
|  | } | 
|  |  | 
|  | static void test_e1000e_tx(void *obj, void *data, QGuestAllocator * alloc) | 
|  | { | 
|  | QE1000E_PCI *e1000e = obj; | 
|  | QE1000E *d = &e1000e->e1000e; | 
|  | QOSGraphObject *e_object = obj; | 
|  | QPCIDevice *dev = e_object->get_driver(e_object, "pci-device"); | 
|  |  | 
|  | /* FIXME: add spapr support */ | 
|  | if (qpci_check_buggy_msi(dev)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | e1000e_send_verify(d, data, alloc); | 
|  | } | 
|  |  | 
|  | static void test_e1000e_rx(void *obj, void *data, QGuestAllocator * alloc) | 
|  | { | 
|  | QE1000E_PCI *e1000e = obj; | 
|  | QE1000E *d = &e1000e->e1000e; | 
|  | QOSGraphObject *e_object = obj; | 
|  | QPCIDevice *dev = e_object->get_driver(e_object, "pci-device"); | 
|  |  | 
|  | /* FIXME: add spapr support */ | 
|  | if (qpci_check_buggy_msi(dev)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | e1000e_receive_verify(d, data, alloc); | 
|  | } | 
|  |  | 
|  | static void test_e1000e_multiple_transfers(void *obj, void *data, | 
|  | QGuestAllocator *alloc) | 
|  | { | 
|  | static const long iterations = 4 * 1024; | 
|  | long i; | 
|  |  | 
|  | QE1000E_PCI *e1000e = obj; | 
|  | QE1000E *d = &e1000e->e1000e; | 
|  | QOSGraphObject *e_object = obj; | 
|  | QPCIDevice *dev = e_object->get_driver(e_object, "pci-device"); | 
|  |  | 
|  | /* FIXME: add spapr support */ | 
|  | if (qpci_check_buggy_msi(dev)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < iterations; i++) { | 
|  | e1000e_send_verify(d, data, alloc); | 
|  | e1000e_receive_verify(d, data, alloc); | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | static void test_e1000e_hotplug(void *obj, void *data, QGuestAllocator * alloc) | 
|  | { | 
|  | QTestState *qts = global_qtest;  /* TODO: get rid of global_qtest here */ | 
|  | QE1000E_PCI *dev = obj; | 
|  |  | 
|  | if (dev->pci_dev.bus->not_hotpluggable) { | 
|  | g_test_skip("pci bus does not support hotplug"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | qtest_qmp_device_add(qts, "e1000e", "e1000e_net", "{'addr': '0x06'}"); | 
|  | qpci_unplug_acpi_device_test(qts, "e1000e_net", 0x06); | 
|  | } | 
|  |  | 
|  | static void data_test_clear(void *sockets) | 
|  | { | 
|  | int *test_sockets = sockets; | 
|  |  | 
|  | close(test_sockets[0]); | 
|  | qos_invalidate_command_line(); | 
|  | close(test_sockets[1]); | 
|  | g_free(test_sockets); | 
|  | } | 
|  |  | 
|  | static void *data_test_init(GString *cmd_line, void *arg) | 
|  | { | 
|  | int *test_sockets = g_new(int, 2); | 
|  | int ret = socketpair(PF_UNIX, SOCK_STREAM, 0, test_sockets); | 
|  | g_assert_cmpint(ret, != , -1); | 
|  |  | 
|  | g_string_append_printf(cmd_line, " -netdev socket,fd=%d,id=hs0 ", | 
|  | test_sockets[1]); | 
|  |  | 
|  | g_test_queue_destroy(data_test_clear, test_sockets); | 
|  | return test_sockets; | 
|  | } | 
|  |  | 
|  | static void register_e1000e_test(void) | 
|  | { | 
|  | QOSGraphTestOptions opts = { | 
|  | .before = data_test_init, | 
|  | }; | 
|  |  | 
|  | qos_add_test("init", "e1000e", test_e1000e_init, &opts); | 
|  | qos_add_test("tx", "e1000e", test_e1000e_tx, &opts); | 
|  | qos_add_test("rx", "e1000e", test_e1000e_rx, &opts); | 
|  | qos_add_test("multiple_transfers", "e1000e", | 
|  | test_e1000e_multiple_transfers, &opts); | 
|  | qos_add_test("hotplug", "e1000e", test_e1000e_hotplug, &opts); | 
|  | } | 
|  |  | 
|  | libqos_init(register_e1000e_test); |