| /* |
| * QEMU IDE Emulation: PCI PIIX3/4 support. |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * Copyright (c) 2006 Openedhand Ltd. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/pci/pci.h" |
| #include "migration/vmstate.h" |
| #include "qemu/module.h" |
| #include "sysemu/block-backend.h" |
| #include "sysemu/blockdev.h" |
| #include "sysemu/dma.h" |
| |
| #include "hw/ide/pci.h" |
| #include "trace.h" |
| |
| static uint64_t bmdma_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| BMDMAState *bm = opaque; |
| uint32_t val; |
| |
| if (size != 1) { |
| return ((uint64_t)1 << (size * 8)) - 1; |
| } |
| |
| switch(addr & 3) { |
| case 0: |
| val = bm->cmd; |
| break; |
| case 2: |
| val = bm->status; |
| break; |
| default: |
| val = 0xff; |
| break; |
| } |
| |
| trace_bmdma_read(addr, val); |
| return val; |
| } |
| |
| static void bmdma_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| BMDMAState *bm = opaque; |
| |
| if (size != 1) { |
| return; |
| } |
| |
| trace_bmdma_write(addr, val); |
| |
| switch(addr & 3) { |
| case 0: |
| bmdma_cmd_writeb(bm, val); |
| break; |
| case 2: |
| bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06); |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps piix_bmdma_ops = { |
| .read = bmdma_read, |
| .write = bmdma_write, |
| }; |
| |
| static void bmdma_setup_bar(PCIIDEState *d) |
| { |
| int i; |
| |
| memory_region_init(&d->bmdma_bar, OBJECT(d), "piix-bmdma-container", 16); |
| for(i = 0;i < 2; i++) { |
| BMDMAState *bm = &d->bmdma[i]; |
| |
| memory_region_init_io(&bm->extra_io, OBJECT(d), &piix_bmdma_ops, bm, |
| "piix-bmdma", 4); |
| memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io); |
| memory_region_init_io(&bm->addr_ioport, OBJECT(d), |
| &bmdma_addr_ioport_ops, bm, "bmdma", 4); |
| memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport); |
| } |
| } |
| |
| static void piix_ide_reset(DeviceState *dev) |
| { |
| PCIIDEState *d = PCI_IDE(dev); |
| PCIDevice *pd = PCI_DEVICE(d); |
| uint8_t *pci_conf = pd->config; |
| int i; |
| |
| for (i = 0; i < 2; i++) { |
| ide_bus_reset(&d->bus[i]); |
| } |
| |
| /* TODO: this is the default. do not override. */ |
| pci_conf[PCI_COMMAND] = 0x00; |
| /* TODO: this is the default. do not override. */ |
| pci_conf[PCI_COMMAND + 1] = 0x00; |
| /* TODO: use pci_set_word */ |
| pci_conf[PCI_STATUS] = PCI_STATUS_FAST_BACK; |
| pci_conf[PCI_STATUS + 1] = PCI_STATUS_DEVSEL_MEDIUM >> 8; |
| pci_conf[0x20] = 0x01; /* BMIBA: 20-23h */ |
| } |
| |
| static void pci_piix_init_ports(PCIIDEState *d) { |
| static const struct { |
| int iobase; |
| int iobase2; |
| int isairq; |
| } port_info[] = { |
| {0x1f0, 0x3f6, 14}, |
| {0x170, 0x376, 15}, |
| }; |
| int i; |
| |
| for (i = 0; i < 2; i++) { |
| ide_bus_new(&d->bus[i], sizeof(d->bus[i]), DEVICE(d), i, 2); |
| ide_init_ioport(&d->bus[i], NULL, port_info[i].iobase, |
| port_info[i].iobase2); |
| ide_init2(&d->bus[i], isa_get_irq(NULL, port_info[i].isairq)); |
| |
| bmdma_init(&d->bus[i], &d->bmdma[i], d); |
| d->bmdma[i].bus = &d->bus[i]; |
| ide_register_restart_cb(&d->bus[i]); |
| } |
| } |
| |
| static void pci_piix_ide_realize(PCIDevice *dev, Error **errp) |
| { |
| PCIIDEState *d = PCI_IDE(dev); |
| uint8_t *pci_conf = dev->config; |
| |
| pci_conf[PCI_CLASS_PROG] = 0x80; // legacy ATA mode |
| |
| bmdma_setup_bar(d); |
| pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar); |
| |
| vmstate_register(VMSTATE_IF(dev), 0, &vmstate_ide_pci, d); |
| |
| pci_piix_init_ports(d); |
| } |
| |
| int pci_piix3_xen_ide_unplug(DeviceState *dev, bool aux) |
| { |
| PCIIDEState *pci_ide; |
| int i; |
| IDEDevice *idedev; |
| IDEBus *idebus; |
| BlockBackend *blk; |
| |
| pci_ide = PCI_IDE(dev); |
| |
| for (i = aux ? 1 : 0; i < 4; i++) { |
| idebus = &pci_ide->bus[i / 2]; |
| blk = idebus->ifs[i % 2].blk; |
| |
| if (blk && idebus->ifs[i % 2].drive_kind != IDE_CD) { |
| if (!(i % 2)) { |
| idedev = idebus->master; |
| } else { |
| idedev = idebus->slave; |
| } |
| |
| blk_drain(blk); |
| blk_flush(blk); |
| |
| blk_detach_dev(blk, DEVICE(idedev)); |
| idebus->ifs[i % 2].blk = NULL; |
| idedev->conf.blk = NULL; |
| monitor_remove_blk(blk); |
| blk_unref(blk); |
| } |
| } |
| qdev_reset_all(dev); |
| return 0; |
| } |
| |
| static void pci_piix_ide_exitfn(PCIDevice *dev) |
| { |
| PCIIDEState *d = PCI_IDE(dev); |
| unsigned i; |
| |
| for (i = 0; i < 2; ++i) { |
| memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io); |
| memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport); |
| } |
| } |
| |
| /* NOTE: for the PIIX3, the IRQs and IOports are hardcoded */ |
| static void piix3_ide_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| dc->reset = piix_ide_reset; |
| k->realize = pci_piix_ide_realize; |
| k->exit = pci_piix_ide_exitfn; |
| k->vendor_id = PCI_VENDOR_ID_INTEL; |
| k->device_id = PCI_DEVICE_ID_INTEL_82371SB_1; |
| k->class_id = PCI_CLASS_STORAGE_IDE; |
| set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); |
| dc->hotpluggable = false; |
| } |
| |
| static const TypeInfo piix3_ide_info = { |
| .name = "piix3-ide", |
| .parent = TYPE_PCI_IDE, |
| .class_init = piix3_ide_class_init, |
| }; |
| |
| static const TypeInfo piix3_ide_xen_info = { |
| .name = "piix3-ide-xen", |
| .parent = TYPE_PCI_IDE, |
| .class_init = piix3_ide_class_init, |
| }; |
| |
| /* NOTE: for the PIIX4, the IRQs and IOports are hardcoded */ |
| static void piix4_ide_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| dc->reset = piix_ide_reset; |
| k->realize = pci_piix_ide_realize; |
| k->exit = pci_piix_ide_exitfn; |
| k->vendor_id = PCI_VENDOR_ID_INTEL; |
| k->device_id = PCI_DEVICE_ID_INTEL_82371AB; |
| k->class_id = PCI_CLASS_STORAGE_IDE; |
| set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); |
| dc->hotpluggable = false; |
| } |
| |
| static const TypeInfo piix4_ide_info = { |
| .name = "piix4-ide", |
| .parent = TYPE_PCI_IDE, |
| .class_init = piix4_ide_class_init, |
| }; |
| |
| static void piix_ide_register_types(void) |
| { |
| type_register_static(&piix3_ide_info); |
| type_register_static(&piix3_ide_xen_info); |
| type_register_static(&piix4_ide_info); |
| } |
| |
| type_init(piix_ide_register_types) |