| /* |
| * TI OMAP processors UART emulation. |
| * |
| * Copyright (C) 2006-2008 Andrzej Zaborowski <balrog@zabor.org> |
| * Copyright (C) 2007-2009 Nokia Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 or |
| * (at your option) version 3 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| #include "qemu/osdep.h" |
| #include "chardev/char.h" |
| #include "hw/arm/omap.h" |
| #include "hw/char/serial.h" |
| #include "exec/address-spaces.h" |
| |
| /* UARTs */ |
| struct omap_uart_s { |
| MemoryRegion iomem; |
| hwaddr base; |
| SerialMM *serial; /* TODO */ |
| struct omap_target_agent_s *ta; |
| omap_clk fclk; |
| qemu_irq irq; |
| |
| uint8_t eblr; |
| uint8_t syscontrol; |
| uint8_t wkup; |
| uint8_t cfps; |
| uint8_t mdr[2]; |
| uint8_t scr; |
| uint8_t clksel; |
| }; |
| |
| void omap_uart_reset(struct omap_uart_s *s) |
| { |
| s->eblr = 0x00; |
| s->syscontrol = 0; |
| s->wkup = 0x3f; |
| s->cfps = 0x69; |
| s->clksel = 0; |
| } |
| |
| struct omap_uart_s *omap_uart_init(hwaddr base, |
| qemu_irq irq, omap_clk fclk, omap_clk iclk, |
| qemu_irq txdma, qemu_irq rxdma, |
| const char *label, Chardev *chr) |
| { |
| struct omap_uart_s *s = g_new0(struct omap_uart_s, 1); |
| |
| s->base = base; |
| s->fclk = fclk; |
| s->irq = irq; |
| s->serial = serial_mm_init(get_system_memory(), base, 2, irq, |
| omap_clk_getrate(fclk)/16, |
| chr ?: qemu_chr_new(label, "null", NULL), |
| DEVICE_NATIVE_ENDIAN); |
| return s; |
| } |
| |
| static uint64_t omap_uart_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_uart_s *s = (struct omap_uart_s *) opaque; |
| |
| if (size == 4) { |
| return omap_badwidth_read8(opaque, addr); |
| } |
| |
| switch (addr) { |
| case 0x20: /* MDR1 */ |
| return s->mdr[0]; |
| case 0x24: /* MDR2 */ |
| return s->mdr[1]; |
| case 0x40: /* SCR */ |
| return s->scr; |
| case 0x44: /* SSR */ |
| return 0x0; |
| case 0x48: /* EBLR (OMAP2) */ |
| return s->eblr; |
| case 0x4C: /* OSC_12M_SEL (OMAP1) */ |
| return s->clksel; |
| case 0x50: /* MVR */ |
| return 0x30; |
| case 0x54: /* SYSC (OMAP2) */ |
| return s->syscontrol; |
| case 0x58: /* SYSS (OMAP2) */ |
| return 1; |
| case 0x5c: /* WER (OMAP2) */ |
| return s->wkup; |
| case 0x60: /* CFPS (OMAP2) */ |
| return s->cfps; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_uart_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_uart_s *s = (struct omap_uart_s *) opaque; |
| |
| if (size == 4) { |
| omap_badwidth_write8(opaque, addr, value); |
| return; |
| } |
| |
| switch (addr) { |
| case 0x20: /* MDR1 */ |
| s->mdr[0] = value & 0x7f; |
| break; |
| case 0x24: /* MDR2 */ |
| s->mdr[1] = value & 0xff; |
| break; |
| case 0x40: /* SCR */ |
| s->scr = value & 0xff; |
| break; |
| case 0x48: /* EBLR (OMAP2) */ |
| s->eblr = value & 0xff; |
| break; |
| case 0x4C: /* OSC_12M_SEL (OMAP1) */ |
| s->clksel = value & 1; |
| break; |
| case 0x44: /* SSR */ |
| case 0x50: /* MVR */ |
| case 0x58: /* SYSS (OMAP2) */ |
| OMAP_RO_REG(addr); |
| break; |
| case 0x54: /* SYSC (OMAP2) */ |
| s->syscontrol = value & 0x1d; |
| if (value & 2) |
| omap_uart_reset(s); |
| break; |
| case 0x5c: /* WER (OMAP2) */ |
| s->wkup = value & 0x7f; |
| break; |
| case 0x60: /* CFPS (OMAP2) */ |
| s->cfps = value & 0xff; |
| break; |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static const MemoryRegionOps omap_uart_ops = { |
| .read = omap_uart_read, |
| .write = omap_uart_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| struct omap_uart_s *omap2_uart_init(MemoryRegion *sysmem, |
| struct omap_target_agent_s *ta, |
| qemu_irq irq, omap_clk fclk, omap_clk iclk, |
| qemu_irq txdma, qemu_irq rxdma, |
| const char *label, Chardev *chr) |
| { |
| hwaddr base = omap_l4_attach(ta, 0, NULL); |
| struct omap_uart_s *s = omap_uart_init(base, irq, |
| fclk, iclk, txdma, rxdma, label, chr); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_uart_ops, s, "omap.uart", 0x100); |
| |
| s->ta = ta; |
| |
| memory_region_add_subregion(sysmem, base + 0x20, &s->iomem); |
| |
| return s; |
| } |
| |
| void omap_uart_attach(struct omap_uart_s *s, Chardev *chr) |
| { |
| /* TODO: Should reuse or destroy current s->serial */ |
| s->serial = serial_mm_init(get_system_memory(), s->base, 2, s->irq, |
| omap_clk_getrate(s->fclk) / 16, |
| chr ?: qemu_chr_new("null", "null", NULL), |
| DEVICE_NATIVE_ENDIAN); |
| } |