| /* |
| * generic functions used by VFIO devices |
| * |
| * Copyright Red Hat, Inc. 2012 |
| * |
| * Authors: |
| * Alex Williamson <alex.williamson@redhat.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. See |
| * the COPYING file in the top-level directory. |
| * |
| * Based on qemu-kvm device-assignment: |
| * Adapted for KVM by Qumranet. |
| * Copyright (c) 2007, Neocleus, Alex Novik (alex@neocleus.com) |
| * Copyright (c) 2007, Neocleus, Guy Zana (guy@neocleus.com) |
| * Copyright (C) 2008, Qumranet, Amit Shah (amit.shah@qumranet.com) |
| * Copyright (C) 2008, Red Hat, Amit Shah (amit.shah@redhat.com) |
| * Copyright (C) 2008, IBM, Muli Ben-Yehuda (muli@il.ibm.com) |
| */ |
| |
| #include <sys/ioctl.h> |
| #include <sys/mman.h> |
| #include <linux/vfio.h> |
| |
| #include "hw/vfio/vfio-common.h" |
| #include "hw/vfio/vfio.h" |
| #include "exec/address-spaces.h" |
| #include "exec/memory.h" |
| #include "hw/hw.h" |
| #include "qemu/error-report.h" |
| #include "sysemu/kvm.h" |
| #include "trace.h" |
| |
| struct vfio_group_head vfio_group_list = |
| QLIST_HEAD_INITIALIZER(vfio_group_list); |
| struct vfio_as_head vfio_address_spaces = |
| QLIST_HEAD_INITIALIZER(vfio_address_spaces); |
| |
| #ifdef CONFIG_KVM |
| /* |
| * We have a single VFIO pseudo device per KVM VM. Once created it lives |
| * for the life of the VM. Closing the file descriptor only drops our |
| * reference to it and the device's reference to kvm. Therefore once |
| * initialized, this file descriptor is only released on QEMU exit and |
| * we'll re-use it should another vfio device be attached before then. |
| */ |
| static int vfio_kvm_device_fd = -1; |
| #endif |
| |
| /* |
| * Common VFIO interrupt disable |
| */ |
| void vfio_disable_irqindex(VFIODevice *vbasedev, int index) |
| { |
| struct vfio_irq_set irq_set = { |
| .argsz = sizeof(irq_set), |
| .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER, |
| .index = index, |
| .start = 0, |
| .count = 0, |
| }; |
| |
| ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set); |
| } |
| |
| void vfio_unmask_single_irqindex(VFIODevice *vbasedev, int index) |
| { |
| struct vfio_irq_set irq_set = { |
| .argsz = sizeof(irq_set), |
| .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_UNMASK, |
| .index = index, |
| .start = 0, |
| .count = 1, |
| }; |
| |
| ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set); |
| } |
| |
| void vfio_mask_single_irqindex(VFIODevice *vbasedev, int index) |
| { |
| struct vfio_irq_set irq_set = { |
| .argsz = sizeof(irq_set), |
| .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_MASK, |
| .index = index, |
| .start = 0, |
| .count = 1, |
| }; |
| |
| ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, &irq_set); |
| } |
| |
| /* |
| * IO Port/MMIO - Beware of the endians, VFIO is always little endian |
| */ |
| void vfio_region_write(void *opaque, hwaddr addr, |
| uint64_t data, unsigned size) |
| { |
| VFIORegion *region = opaque; |
| VFIODevice *vbasedev = region->vbasedev; |
| union { |
| uint8_t byte; |
| uint16_t word; |
| uint32_t dword; |
| uint64_t qword; |
| } buf; |
| |
| switch (size) { |
| case 1: |
| buf.byte = data; |
| break; |
| case 2: |
| buf.word = cpu_to_le16(data); |
| break; |
| case 4: |
| buf.dword = cpu_to_le32(data); |
| break; |
| default: |
| hw_error("vfio: unsupported write size, %d bytes", size); |
| break; |
| } |
| |
| if (pwrite(vbasedev->fd, &buf, size, region->fd_offset + addr) != size) { |
| error_report("%s(%s:region%d+0x%"HWADDR_PRIx", 0x%"PRIx64 |
| ",%d) failed: %m", |
| __func__, vbasedev->name, region->nr, |
| addr, data, size); |
| } |
| |
| trace_vfio_region_write(vbasedev->name, region->nr, addr, data, size); |
| |
| /* |
| * A read or write to a BAR always signals an INTx EOI. This will |
| * do nothing if not pending (including not in INTx mode). We assume |
| * that a BAR access is in response to an interrupt and that BAR |
| * accesses will service the interrupt. Unfortunately, we don't know |
| * which access will service the interrupt, so we're potentially |
| * getting quite a few host interrupts per guest interrupt. |
| */ |
| vbasedev->ops->vfio_eoi(vbasedev); |
| } |
| |
| uint64_t vfio_region_read(void *opaque, |
| hwaddr addr, unsigned size) |
| { |
| VFIORegion *region = opaque; |
| VFIODevice *vbasedev = region->vbasedev; |
| union { |
| uint8_t byte; |
| uint16_t word; |
| uint32_t dword; |
| uint64_t qword; |
| } buf; |
| uint64_t data = 0; |
| |
| if (pread(vbasedev->fd, &buf, size, region->fd_offset + addr) != size) { |
| error_report("%s(%s:region%d+0x%"HWADDR_PRIx", %d) failed: %m", |
| __func__, vbasedev->name, region->nr, |
| addr, size); |
| return (uint64_t)-1; |
| } |
| switch (size) { |
| case 1: |
| data = buf.byte; |
| break; |
| case 2: |
| data = le16_to_cpu(buf.word); |
| break; |
| case 4: |
| data = le32_to_cpu(buf.dword); |
| break; |
| default: |
| hw_error("vfio: unsupported read size, %d bytes", size); |
| break; |
| } |
| |
| trace_vfio_region_read(vbasedev->name, region->nr, addr, size, data); |
| |
| /* Same as write above */ |
| vbasedev->ops->vfio_eoi(vbasedev); |
| |
| return data; |
| } |
| |
| const MemoryRegionOps vfio_region_ops = { |
| .read = vfio_region_read, |
| .write = vfio_region_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| /* |
| * DMA - Mapping and unmapping for the "type1" IOMMU interface used on x86 |
| */ |
| static int vfio_dma_unmap(VFIOContainer *container, |
| hwaddr iova, ram_addr_t size) |
| { |
| struct vfio_iommu_type1_dma_unmap unmap = { |
| .argsz = sizeof(unmap), |
| .flags = 0, |
| .iova = iova, |
| .size = size, |
| }; |
| |
| if (ioctl(container->fd, VFIO_IOMMU_UNMAP_DMA, &unmap)) { |
| error_report("VFIO_UNMAP_DMA: %d", -errno); |
| return -errno; |
| } |
| |
| return 0; |
| } |
| |
| static int vfio_dma_map(VFIOContainer *container, hwaddr iova, |
| ram_addr_t size, void *vaddr, bool readonly) |
| { |
| struct vfio_iommu_type1_dma_map map = { |
| .argsz = sizeof(map), |
| .flags = VFIO_DMA_MAP_FLAG_READ, |
| .vaddr = (__u64)(uintptr_t)vaddr, |
| .iova = iova, |
| .size = size, |
| }; |
| |
| if (!readonly) { |
| map.flags |= VFIO_DMA_MAP_FLAG_WRITE; |
| } |
| |
| /* |
| * Try the mapping, if it fails with EBUSY, unmap the region and try |
| * again. This shouldn't be necessary, but we sometimes see it in |
| * the the VGA ROM space. |
| */ |
| if (ioctl(container->fd, VFIO_IOMMU_MAP_DMA, &map) == 0 || |
| (errno == EBUSY && vfio_dma_unmap(container, iova, size) == 0 && |
| ioctl(container->fd, VFIO_IOMMU_MAP_DMA, &map) == 0)) { |
| return 0; |
| } |
| |
| error_report("VFIO_MAP_DMA: %d", -errno); |
| return -errno; |
| } |
| |
| static bool vfio_listener_skipped_section(MemoryRegionSection *section) |
| { |
| return (!memory_region_is_ram(section->mr) && |
| !memory_region_is_iommu(section->mr)) || |
| /* |
| * Sizing an enabled 64-bit BAR can cause spurious mappings to |
| * addresses in the upper part of the 64-bit address space. These |
| * are never accessed by the CPU and beyond the address width of |
| * some IOMMU hardware. TODO: VFIO should tell us the IOMMU width. |
| */ |
| section->offset_within_address_space & (1ULL << 63); |
| } |
| |
| static void vfio_iommu_map_notify(Notifier *n, void *data) |
| { |
| VFIOGuestIOMMU *giommu = container_of(n, VFIOGuestIOMMU, n); |
| VFIOContainer *container = giommu->container; |
| IOMMUTLBEntry *iotlb = data; |
| MemoryRegion *mr; |
| hwaddr xlat; |
| hwaddr len = iotlb->addr_mask + 1; |
| void *vaddr; |
| int ret; |
| |
| trace_vfio_iommu_map_notify(iotlb->iova, |
| iotlb->iova + iotlb->addr_mask); |
| |
| /* |
| * The IOMMU TLB entry we have just covers translation through |
| * this IOMMU to its immediate target. We need to translate |
| * it the rest of the way through to memory. |
| */ |
| mr = address_space_translate(&address_space_memory, |
| iotlb->translated_addr, |
| &xlat, &len, iotlb->perm & IOMMU_WO); |
| if (!memory_region_is_ram(mr)) { |
| error_report("iommu map to non memory area %"HWADDR_PRIx"", |
| xlat); |
| return; |
| } |
| /* |
| * Translation truncates length to the IOMMU page size, |
| * check that it did not truncate too much. |
| */ |
| if (len & iotlb->addr_mask) { |
| error_report("iommu has granularity incompatible with target AS"); |
| return; |
| } |
| |
| if ((iotlb->perm & IOMMU_RW) != IOMMU_NONE) { |
| vaddr = memory_region_get_ram_ptr(mr) + xlat; |
| ret = vfio_dma_map(container, iotlb->iova, |
| iotlb->addr_mask + 1, vaddr, |
| !(iotlb->perm & IOMMU_WO) || mr->readonly); |
| if (ret) { |
| error_report("vfio_dma_map(%p, 0x%"HWADDR_PRIx", " |
| "0x%"HWADDR_PRIx", %p) = %d (%m)", |
| container, iotlb->iova, |
| iotlb->addr_mask + 1, vaddr, ret); |
| } |
| } else { |
| ret = vfio_dma_unmap(container, iotlb->iova, iotlb->addr_mask + 1); |
| if (ret) { |
| error_report("vfio_dma_unmap(%p, 0x%"HWADDR_PRIx", " |
| "0x%"HWADDR_PRIx") = %d (%m)", |
| container, iotlb->iova, |
| iotlb->addr_mask + 1, ret); |
| } |
| } |
| } |
| |
| static void vfio_listener_region_add(MemoryListener *listener, |
| MemoryRegionSection *section) |
| { |
| VFIOContainer *container = container_of(listener, VFIOContainer, |
| iommu_data.type1.listener); |
| hwaddr iova, end; |
| Int128 llend; |
| void *vaddr; |
| int ret; |
| |
| if (vfio_listener_skipped_section(section)) { |
| trace_vfio_listener_region_add_skip( |
| section->offset_within_address_space, |
| section->offset_within_address_space + |
| int128_get64(int128_sub(section->size, int128_one()))); |
| return; |
| } |
| |
| if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) != |
| (section->offset_within_region & ~TARGET_PAGE_MASK))) { |
| error_report("%s received unaligned region", __func__); |
| return; |
| } |
| |
| iova = TARGET_PAGE_ALIGN(section->offset_within_address_space); |
| llend = int128_make64(section->offset_within_address_space); |
| llend = int128_add(llend, section->size); |
| llend = int128_and(llend, int128_exts64(TARGET_PAGE_MASK)); |
| |
| if (int128_ge(int128_make64(iova), llend)) { |
| return; |
| } |
| |
| memory_region_ref(section->mr); |
| |
| if (memory_region_is_iommu(section->mr)) { |
| VFIOGuestIOMMU *giommu; |
| |
| trace_vfio_listener_region_add_iommu(iova, |
| int128_get64(int128_sub(llend, int128_one()))); |
| /* |
| * FIXME: We should do some checking to see if the |
| * capabilities of the host VFIO IOMMU are adequate to model |
| * the guest IOMMU |
| * |
| * FIXME: For VFIO iommu types which have KVM acceleration to |
| * avoid bouncing all map/unmaps through qemu this way, this |
| * would be the right place to wire that up (tell the KVM |
| * device emulation the VFIO iommu handles to use). |
| */ |
| /* |
| * This assumes that the guest IOMMU is empty of |
| * mappings at this point. |
| * |
| * One way of doing this is: |
| * 1. Avoid sharing IOMMUs between emulated devices or different |
| * IOMMU groups. |
| * 2. Implement VFIO_IOMMU_ENABLE in the host kernel to fail if |
| * there are some mappings in IOMMU. |
| * |
| * VFIO on SPAPR does that. Other IOMMU models may do that different, |
| * they must make sure there are no existing mappings or |
| * loop through existing mappings to map them into VFIO. |
| */ |
| giommu = g_malloc0(sizeof(*giommu)); |
| giommu->iommu = section->mr; |
| giommu->container = container; |
| giommu->n.notify = vfio_iommu_map_notify; |
| QLIST_INSERT_HEAD(&container->giommu_list, giommu, giommu_next); |
| memory_region_register_iommu_notifier(giommu->iommu, &giommu->n); |
| |
| return; |
| } |
| |
| /* Here we assume that memory_region_is_ram(section->mr)==true */ |
| |
| end = int128_get64(llend); |
| vaddr = memory_region_get_ram_ptr(section->mr) + |
| section->offset_within_region + |
| (iova - section->offset_within_address_space); |
| |
| trace_vfio_listener_region_add_ram(iova, end - 1, vaddr); |
| |
| ret = vfio_dma_map(container, iova, end - iova, vaddr, section->readonly); |
| if (ret) { |
| error_report("vfio_dma_map(%p, 0x%"HWADDR_PRIx", " |
| "0x%"HWADDR_PRIx", %p) = %d (%m)", |
| container, iova, end - iova, vaddr, ret); |
| |
| /* |
| * On the initfn path, store the first error in the container so we |
| * can gracefully fail. Runtime, there's not much we can do other |
| * than throw a hardware error. |
| */ |
| if (!container->iommu_data.type1.initialized) { |
| if (!container->iommu_data.type1.error) { |
| container->iommu_data.type1.error = ret; |
| } |
| } else { |
| hw_error("vfio: DMA mapping failed, unable to continue"); |
| } |
| } |
| } |
| |
| static void vfio_listener_region_del(MemoryListener *listener, |
| MemoryRegionSection *section) |
| { |
| VFIOContainer *container = container_of(listener, VFIOContainer, |
| iommu_data.type1.listener); |
| hwaddr iova, end; |
| int ret; |
| |
| if (vfio_listener_skipped_section(section)) { |
| trace_vfio_listener_region_del_skip( |
| section->offset_within_address_space, |
| section->offset_within_address_space + |
| int128_get64(int128_sub(section->size, int128_one()))); |
| return; |
| } |
| |
| if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) != |
| (section->offset_within_region & ~TARGET_PAGE_MASK))) { |
| error_report("%s received unaligned region", __func__); |
| return; |
| } |
| |
| if (memory_region_is_iommu(section->mr)) { |
| VFIOGuestIOMMU *giommu; |
| |
| QLIST_FOREACH(giommu, &container->giommu_list, giommu_next) { |
| if (giommu->iommu == section->mr) { |
| memory_region_unregister_iommu_notifier(&giommu->n); |
| QLIST_REMOVE(giommu, giommu_next); |
| g_free(giommu); |
| break; |
| } |
| } |
| |
| /* |
| * FIXME: We assume the one big unmap below is adequate to |
| * remove any individual page mappings in the IOMMU which |
| * might have been copied into VFIO. This works for a page table |
| * based IOMMU where a big unmap flattens a large range of IO-PTEs. |
| * That may not be true for all IOMMU types. |
| */ |
| } |
| |
| iova = TARGET_PAGE_ALIGN(section->offset_within_address_space); |
| end = (section->offset_within_address_space + int128_get64(section->size)) & |
| TARGET_PAGE_MASK; |
| |
| if (iova >= end) { |
| return; |
| } |
| |
| trace_vfio_listener_region_del(iova, end - 1); |
| |
| ret = vfio_dma_unmap(container, iova, end - iova); |
| memory_region_unref(section->mr); |
| if (ret) { |
| error_report("vfio_dma_unmap(%p, 0x%"HWADDR_PRIx", " |
| "0x%"HWADDR_PRIx") = %d (%m)", |
| container, iova, end - iova, ret); |
| } |
| } |
| |
| static const MemoryListener vfio_memory_listener = { |
| .region_add = vfio_listener_region_add, |
| .region_del = vfio_listener_region_del, |
| }; |
| |
| static void vfio_listener_release(VFIOContainer *container) |
| { |
| memory_listener_unregister(&container->iommu_data.type1.listener); |
| } |
| |
| int vfio_mmap_region(Object *obj, VFIORegion *region, |
| MemoryRegion *mem, MemoryRegion *submem, |
| void **map, size_t size, off_t offset, |
| const char *name) |
| { |
| int ret = 0; |
| VFIODevice *vbasedev = region->vbasedev; |
| |
| if (vbasedev->allow_mmap && size && region->flags & |
| VFIO_REGION_INFO_FLAG_MMAP) { |
| int prot = 0; |
| |
| if (region->flags & VFIO_REGION_INFO_FLAG_READ) { |
| prot |= PROT_READ; |
| } |
| |
| if (region->flags & VFIO_REGION_INFO_FLAG_WRITE) { |
| prot |= PROT_WRITE; |
| } |
| |
| *map = mmap(NULL, size, prot, MAP_SHARED, |
| vbasedev->fd, |
| region->fd_offset + offset); |
| if (*map == MAP_FAILED) { |
| *map = NULL; |
| ret = -errno; |
| goto empty_region; |
| } |
| |
| memory_region_init_ram_ptr(submem, obj, name, size, *map); |
| memory_region_set_skip_dump(submem); |
| } else { |
| empty_region: |
| /* Create a zero sized sub-region to make cleanup easy. */ |
| memory_region_init(submem, obj, name, 0); |
| } |
| |
| memory_region_add_subregion(mem, offset, submem); |
| |
| return ret; |
| } |
| |
| void vfio_reset_handler(void *opaque) |
| { |
| VFIOGroup *group; |
| VFIODevice *vbasedev; |
| |
| QLIST_FOREACH(group, &vfio_group_list, next) { |
| QLIST_FOREACH(vbasedev, &group->device_list, next) { |
| vbasedev->ops->vfio_compute_needs_reset(vbasedev); |
| } |
| } |
| |
| QLIST_FOREACH(group, &vfio_group_list, next) { |
| QLIST_FOREACH(vbasedev, &group->device_list, next) { |
| if (vbasedev->needs_reset) { |
| vbasedev->ops->vfio_hot_reset_multi(vbasedev); |
| } |
| } |
| } |
| } |
| |
| static void vfio_kvm_device_add_group(VFIOGroup *group) |
| { |
| #ifdef CONFIG_KVM |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_VFIO_GROUP, |
| .attr = KVM_DEV_VFIO_GROUP_ADD, |
| .addr = (uint64_t)(unsigned long)&group->fd, |
| }; |
| |
| if (!kvm_enabled()) { |
| return; |
| } |
| |
| if (vfio_kvm_device_fd < 0) { |
| struct kvm_create_device cd = { |
| .type = KVM_DEV_TYPE_VFIO, |
| }; |
| |
| if (kvm_vm_ioctl(kvm_state, KVM_CREATE_DEVICE, &cd)) { |
| error_report("Failed to create KVM VFIO device: %m"); |
| return; |
| } |
| |
| vfio_kvm_device_fd = cd.fd; |
| } |
| |
| if (ioctl(vfio_kvm_device_fd, KVM_SET_DEVICE_ATTR, &attr)) { |
| error_report("Failed to add group %d to KVM VFIO device: %m", |
| group->groupid); |
| } |
| #endif |
| } |
| |
| static void vfio_kvm_device_del_group(VFIOGroup *group) |
| { |
| #ifdef CONFIG_KVM |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_VFIO_GROUP, |
| .attr = KVM_DEV_VFIO_GROUP_DEL, |
| .addr = (uint64_t)(unsigned long)&group->fd, |
| }; |
| |
| if (vfio_kvm_device_fd < 0) { |
| return; |
| } |
| |
| if (ioctl(vfio_kvm_device_fd, KVM_SET_DEVICE_ATTR, &attr)) { |
| error_report("Failed to remove group %d from KVM VFIO device: %m", |
| group->groupid); |
| } |
| #endif |
| } |
| |
| static VFIOAddressSpace *vfio_get_address_space(AddressSpace *as) |
| { |
| VFIOAddressSpace *space; |
| |
| QLIST_FOREACH(space, &vfio_address_spaces, list) { |
| if (space->as == as) { |
| return space; |
| } |
| } |
| |
| /* No suitable VFIOAddressSpace, create a new one */ |
| space = g_malloc0(sizeof(*space)); |
| space->as = as; |
| QLIST_INIT(&space->containers); |
| |
| QLIST_INSERT_HEAD(&vfio_address_spaces, space, list); |
| |
| return space; |
| } |
| |
| static void vfio_put_address_space(VFIOAddressSpace *space) |
| { |
| if (QLIST_EMPTY(&space->containers)) { |
| QLIST_REMOVE(space, list); |
| g_free(space); |
| } |
| } |
| |
| static int vfio_connect_container(VFIOGroup *group, AddressSpace *as) |
| { |
| VFIOContainer *container; |
| int ret, fd; |
| VFIOAddressSpace *space; |
| |
| space = vfio_get_address_space(as); |
| |
| QLIST_FOREACH(container, &space->containers, next) { |
| if (!ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &container->fd)) { |
| group->container = container; |
| QLIST_INSERT_HEAD(&container->group_list, group, container_next); |
| return 0; |
| } |
| } |
| |
| fd = qemu_open("/dev/vfio/vfio", O_RDWR); |
| if (fd < 0) { |
| error_report("vfio: failed to open /dev/vfio/vfio: %m"); |
| ret = -errno; |
| goto put_space_exit; |
| } |
| |
| ret = ioctl(fd, VFIO_GET_API_VERSION); |
| if (ret != VFIO_API_VERSION) { |
| error_report("vfio: supported vfio version: %d, " |
| "reported version: %d", VFIO_API_VERSION, ret); |
| ret = -EINVAL; |
| goto close_fd_exit; |
| } |
| |
| container = g_malloc0(sizeof(*container)); |
| container->space = space; |
| container->fd = fd; |
| if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU) || |
| ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_TYPE1v2_IOMMU)) { |
| bool v2 = !!ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_TYPE1v2_IOMMU); |
| |
| ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd); |
| if (ret) { |
| error_report("vfio: failed to set group container: %m"); |
| ret = -errno; |
| goto free_container_exit; |
| } |
| |
| ret = ioctl(fd, VFIO_SET_IOMMU, |
| v2 ? VFIO_TYPE1v2_IOMMU : VFIO_TYPE1_IOMMU); |
| if (ret) { |
| error_report("vfio: failed to set iommu for container: %m"); |
| ret = -errno; |
| goto free_container_exit; |
| } |
| |
| container->iommu_data.type1.listener = vfio_memory_listener; |
| container->iommu_data.release = vfio_listener_release; |
| |
| memory_listener_register(&container->iommu_data.type1.listener, |
| container->space->as); |
| |
| if (container->iommu_data.type1.error) { |
| ret = container->iommu_data.type1.error; |
| error_report("vfio: memory listener initialization failed for container"); |
| goto listener_release_exit; |
| } |
| |
| container->iommu_data.type1.initialized = true; |
| |
| } else if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_SPAPR_TCE_IOMMU)) { |
| ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd); |
| if (ret) { |
| error_report("vfio: failed to set group container: %m"); |
| ret = -errno; |
| goto free_container_exit; |
| } |
| ret = ioctl(fd, VFIO_SET_IOMMU, VFIO_SPAPR_TCE_IOMMU); |
| if (ret) { |
| error_report("vfio: failed to set iommu for container: %m"); |
| ret = -errno; |
| goto free_container_exit; |
| } |
| |
| /* |
| * The host kernel code implementing VFIO_IOMMU_DISABLE is called |
| * when container fd is closed so we do not call it explicitly |
| * in this file. |
| */ |
| ret = ioctl(fd, VFIO_IOMMU_ENABLE); |
| if (ret) { |
| error_report("vfio: failed to enable container: %m"); |
| ret = -errno; |
| goto free_container_exit; |
| } |
| |
| container->iommu_data.type1.listener = vfio_memory_listener; |
| container->iommu_data.release = vfio_listener_release; |
| |
| memory_listener_register(&container->iommu_data.type1.listener, |
| container->space->as); |
| |
| } else { |
| error_report("vfio: No available IOMMU models"); |
| ret = -EINVAL; |
| goto free_container_exit; |
| } |
| |
| QLIST_INIT(&container->group_list); |
| QLIST_INSERT_HEAD(&space->containers, container, next); |
| |
| group->container = container; |
| QLIST_INSERT_HEAD(&container->group_list, group, container_next); |
| |
| return 0; |
| listener_release_exit: |
| vfio_listener_release(container); |
| |
| free_container_exit: |
| g_free(container); |
| |
| close_fd_exit: |
| close(fd); |
| |
| put_space_exit: |
| vfio_put_address_space(space); |
| |
| return ret; |
| } |
| |
| static void vfio_disconnect_container(VFIOGroup *group) |
| { |
| VFIOContainer *container = group->container; |
| |
| if (ioctl(group->fd, VFIO_GROUP_UNSET_CONTAINER, &container->fd)) { |
| error_report("vfio: error disconnecting group %d from container", |
| group->groupid); |
| } |
| |
| QLIST_REMOVE(group, container_next); |
| group->container = NULL; |
| |
| if (QLIST_EMPTY(&container->group_list)) { |
| VFIOAddressSpace *space = container->space; |
| |
| if (container->iommu_data.release) { |
| container->iommu_data.release(container); |
| } |
| QLIST_REMOVE(container, next); |
| trace_vfio_disconnect_container(container->fd); |
| close(container->fd); |
| g_free(container); |
| |
| vfio_put_address_space(space); |
| } |
| } |
| |
| VFIOGroup *vfio_get_group(int groupid, AddressSpace *as) |
| { |
| VFIOGroup *group; |
| char path[32]; |
| struct vfio_group_status status = { .argsz = sizeof(status) }; |
| |
| QLIST_FOREACH(group, &vfio_group_list, next) { |
| if (group->groupid == groupid) { |
| /* Found it. Now is it already in the right context? */ |
| if (group->container->space->as == as) { |
| return group; |
| } else { |
| error_report("vfio: group %d used in multiple address spaces", |
| group->groupid); |
| return NULL; |
| } |
| } |
| } |
| |
| group = g_malloc0(sizeof(*group)); |
| |
| snprintf(path, sizeof(path), "/dev/vfio/%d", groupid); |
| group->fd = qemu_open(path, O_RDWR); |
| if (group->fd < 0) { |
| error_report("vfio: error opening %s: %m", path); |
| goto free_group_exit; |
| } |
| |
| if (ioctl(group->fd, VFIO_GROUP_GET_STATUS, &status)) { |
| error_report("vfio: error getting group status: %m"); |
| goto close_fd_exit; |
| } |
| |
| if (!(status.flags & VFIO_GROUP_FLAGS_VIABLE)) { |
| error_report("vfio: error, group %d is not viable, please ensure " |
| "all devices within the iommu_group are bound to their " |
| "vfio bus driver.", groupid); |
| goto close_fd_exit; |
| } |
| |
| group->groupid = groupid; |
| QLIST_INIT(&group->device_list); |
| |
| if (vfio_connect_container(group, as)) { |
| error_report("vfio: failed to setup container for group %d", groupid); |
| goto close_fd_exit; |
| } |
| |
| if (QLIST_EMPTY(&vfio_group_list)) { |
| qemu_register_reset(vfio_reset_handler, NULL); |
| } |
| |
| QLIST_INSERT_HEAD(&vfio_group_list, group, next); |
| |
| vfio_kvm_device_add_group(group); |
| |
| return group; |
| |
| close_fd_exit: |
| close(group->fd); |
| |
| free_group_exit: |
| g_free(group); |
| |
| return NULL; |
| } |
| |
| void vfio_put_group(VFIOGroup *group) |
| { |
| if (!group || !QLIST_EMPTY(&group->device_list)) { |
| return; |
| } |
| |
| vfio_kvm_device_del_group(group); |
| vfio_disconnect_container(group); |
| QLIST_REMOVE(group, next); |
| trace_vfio_put_group(group->fd); |
| close(group->fd); |
| g_free(group); |
| |
| if (QLIST_EMPTY(&vfio_group_list)) { |
| qemu_unregister_reset(vfio_reset_handler, NULL); |
| } |
| } |
| |
| int vfio_get_device(VFIOGroup *group, const char *name, |
| VFIODevice *vbasedev) |
| { |
| struct vfio_device_info dev_info = { .argsz = sizeof(dev_info) }; |
| int ret, fd; |
| |
| fd = ioctl(group->fd, VFIO_GROUP_GET_DEVICE_FD, name); |
| if (fd < 0) { |
| error_report("vfio: error getting device %s from group %d: %m", |
| name, group->groupid); |
| error_printf("Verify all devices in group %d are bound to vfio-<bus> " |
| "or pci-stub and not already in use\n", group->groupid); |
| return fd; |
| } |
| |
| ret = ioctl(fd, VFIO_DEVICE_GET_INFO, &dev_info); |
| if (ret) { |
| error_report("vfio: error getting device info: %m"); |
| close(fd); |
| return ret; |
| } |
| |
| vbasedev->fd = fd; |
| vbasedev->group = group; |
| QLIST_INSERT_HEAD(&group->device_list, vbasedev, next); |
| |
| vbasedev->num_irqs = dev_info.num_irqs; |
| vbasedev->num_regions = dev_info.num_regions; |
| vbasedev->flags = dev_info.flags; |
| |
| trace_vfio_get_device(name, dev_info.flags, dev_info.num_regions, |
| dev_info.num_irqs); |
| |
| vbasedev->reset_works = !!(dev_info.flags & VFIO_DEVICE_FLAGS_RESET); |
| return 0; |
| } |
| |
| void vfio_put_base_device(VFIODevice *vbasedev) |
| { |
| if (!vbasedev->group) { |
| return; |
| } |
| QLIST_REMOVE(vbasedev, next); |
| vbasedev->group = NULL; |
| trace_vfio_put_base_device(vbasedev->fd); |
| close(vbasedev->fd); |
| } |
| |
| static int vfio_container_do_ioctl(AddressSpace *as, int32_t groupid, |
| int req, void *param) |
| { |
| VFIOGroup *group; |
| VFIOContainer *container; |
| int ret = -1; |
| |
| group = vfio_get_group(groupid, as); |
| if (!group) { |
| error_report("vfio: group %d not registered", groupid); |
| return ret; |
| } |
| |
| container = group->container; |
| if (group->container) { |
| ret = ioctl(container->fd, req, param); |
| if (ret < 0) { |
| error_report("vfio: failed to ioctl %d to container: ret=%d, %s", |
| _IOC_NR(req) - VFIO_BASE, ret, strerror(errno)); |
| } |
| } |
| |
| vfio_put_group(group); |
| |
| return ret; |
| } |
| |
| int vfio_container_ioctl(AddressSpace *as, int32_t groupid, |
| int req, void *param) |
| { |
| /* We allow only certain ioctls to the container */ |
| switch (req) { |
| case VFIO_CHECK_EXTENSION: |
| case VFIO_IOMMU_SPAPR_TCE_GET_INFO: |
| case VFIO_EEH_PE_OP: |
| break; |
| default: |
| /* Return an error on unknown requests */ |
| error_report("vfio: unsupported ioctl %X", req); |
| return -1; |
| } |
| |
| return vfio_container_do_ioctl(as, groupid, req, param); |
| } |