| /* |
| * QTest testcase for VirtIO Block Device |
| * |
| * Copyright (c) 2014 SUSE LINUX Products GmbH |
| * Copyright (c) 2014 Marc MarĂ |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "libqtest-single.h" |
| #include "qemu/bswap.h" |
| #include "qemu/module.h" |
| #include "standard-headers/linux/virtio_blk.h" |
| #include "standard-headers/linux/virtio_pci.h" |
| #include "libqos/qgraph.h" |
| #include "libqos/virtio-blk.h" |
| |
| /* TODO actually test the results and get rid of this */ |
| #define qmp_discard_response(...) qobject_unref(qmp(__VA_ARGS__)) |
| |
| #define TEST_IMAGE_SIZE (64 * 1024 * 1024) |
| #define QVIRTIO_BLK_TIMEOUT_US (30 * 1000 * 1000) |
| #define PCI_SLOT_HP 0x06 |
| |
| typedef struct QVirtioBlkReq { |
| uint32_t type; |
| uint32_t ioprio; |
| uint64_t sector; |
| char *data; |
| uint8_t status; |
| } QVirtioBlkReq; |
| |
| |
| #if HOST_BIG_ENDIAN |
| const bool host_is_big_endian = true; |
| #else |
| const bool host_is_big_endian; /* false */ |
| #endif |
| |
| static void drive_destroy(void *path) |
| { |
| unlink(path); |
| g_free(path); |
| qos_invalidate_command_line(); |
| } |
| |
| static char *drive_create(void) |
| { |
| int fd, ret; |
| char *t_path; |
| |
| /* Create a temporary raw image */ |
| fd = g_file_open_tmp("qtest.XXXXXX", &t_path, NULL); |
| g_assert_cmpint(fd, >=, 0); |
| ret = ftruncate(fd, TEST_IMAGE_SIZE); |
| g_assert_cmpint(ret, ==, 0); |
| close(fd); |
| |
| g_test_queue_destroy(drive_destroy, t_path); |
| return t_path; |
| } |
| |
| static inline void virtio_blk_fix_request(QVirtioDevice *d, QVirtioBlkReq *req) |
| { |
| if (qvirtio_is_big_endian(d) != host_is_big_endian) { |
| req->type = bswap32(req->type); |
| req->ioprio = bswap32(req->ioprio); |
| req->sector = bswap64(req->sector); |
| } |
| } |
| |
| |
| static inline void virtio_blk_fix_dwz_hdr(QVirtioDevice *d, |
| struct virtio_blk_discard_write_zeroes *dwz_hdr) |
| { |
| if (qvirtio_is_big_endian(d) != host_is_big_endian) { |
| dwz_hdr->sector = bswap64(dwz_hdr->sector); |
| dwz_hdr->num_sectors = bswap32(dwz_hdr->num_sectors); |
| dwz_hdr->flags = bswap32(dwz_hdr->flags); |
| } |
| } |
| |
| static uint64_t virtio_blk_request(QGuestAllocator *alloc, QVirtioDevice *d, |
| QVirtioBlkReq *req, uint64_t data_size) |
| { |
| uint64_t addr; |
| uint8_t status = 0xFF; |
| |
| switch (req->type) { |
| case VIRTIO_BLK_T_IN: |
| case VIRTIO_BLK_T_OUT: |
| g_assert_cmpuint(data_size % 512, ==, 0); |
| break; |
| case VIRTIO_BLK_T_DISCARD: |
| case VIRTIO_BLK_T_WRITE_ZEROES: |
| g_assert_cmpuint(data_size % |
| sizeof(struct virtio_blk_discard_write_zeroes), ==, 0); |
| break; |
| default: |
| g_assert_cmpuint(data_size, ==, 0); |
| } |
| |
| addr = guest_alloc(alloc, sizeof(*req) + data_size); |
| |
| virtio_blk_fix_request(d, req); |
| |
| memwrite(addr, req, 16); |
| memwrite(addr + 16, req->data, data_size); |
| memwrite(addr + 16 + data_size, &status, sizeof(status)); |
| |
| return addr; |
| } |
| |
| /* Returns the request virtqueue so the caller can perform further tests */ |
| static QVirtQueue *test_basic(QVirtioDevice *dev, QGuestAllocator *alloc) |
| { |
| QVirtioBlkReq req; |
| uint64_t req_addr; |
| uint64_t capacity; |
| uint64_t features; |
| uint32_t free_head; |
| uint8_t status; |
| char *data; |
| QTestState *qts = global_qtest; |
| QVirtQueue *vq; |
| |
| features = qvirtio_get_features(dev); |
| features = features & ~(QVIRTIO_F_BAD_FEATURE | |
| (1u << VIRTIO_RING_F_INDIRECT_DESC) | |
| (1u << VIRTIO_RING_F_EVENT_IDX) | |
| (1u << VIRTIO_BLK_F_SCSI)); |
| qvirtio_set_features(dev, features); |
| |
| capacity = qvirtio_config_readq(dev, 0); |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| vq = qvirtqueue_setup(dev, alloc, 0); |
| |
| qvirtio_set_driver_ok(dev); |
| |
| /* Write and read with 3 descriptor layout */ |
| /* Write request */ |
| req.type = VIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(qts, vq, req_addr, 16, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 16, 512, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 528, 1, true, false); |
| |
| qvirtqueue_kick(qts, dev, vq, free_head); |
| |
| qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL, |
| QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| guest_free(alloc, req_addr); |
| |
| /* Read request */ |
| req.type = VIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| |
| req_addr = virtio_blk_request(alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(qts, vq, req_addr, 16, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 16, 512, true, true); |
| qvirtqueue_add(qts, vq, req_addr + 528, 1, true, false); |
| |
| qvirtqueue_kick(qts, dev, vq, free_head); |
| |
| qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL, |
| QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| guest_free(alloc, req_addr); |
| |
| if (features & (1u << VIRTIO_BLK_F_WRITE_ZEROES)) { |
| struct virtio_blk_discard_write_zeroes dwz_hdr; |
| void *expected; |
| |
| /* |
| * WRITE_ZEROES request on the same sector of previous test where |
| * we wrote "TEST". |
| */ |
| req.type = VIRTIO_BLK_T_WRITE_ZEROES; |
| req.data = (char *) &dwz_hdr; |
| dwz_hdr.sector = 0; |
| dwz_hdr.num_sectors = 1; |
| dwz_hdr.flags = 0; |
| |
| virtio_blk_fix_dwz_hdr(dev, &dwz_hdr); |
| |
| req_addr = virtio_blk_request(alloc, dev, &req, sizeof(dwz_hdr)); |
| |
| free_head = qvirtqueue_add(qts, vq, req_addr, 16, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 16, sizeof(dwz_hdr), false, true); |
| qvirtqueue_add(qts, vq, req_addr + 16 + sizeof(dwz_hdr), 1, true, |
| false); |
| |
| qvirtqueue_kick(qts, dev, vq, free_head); |
| |
| qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL, |
| QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 16 + sizeof(dwz_hdr)); |
| g_assert_cmpint(status, ==, 0); |
| |
| guest_free(alloc, req_addr); |
| |
| /* Read request to check if the sector contains all zeroes */ |
| req.type = VIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| |
| req_addr = virtio_blk_request(alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(qts, vq, req_addr, 16, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 16, 512, true, true); |
| qvirtqueue_add(qts, vq, req_addr + 528, 1, true, false); |
| |
| qvirtqueue_kick(qts, dev, vq, free_head); |
| |
| qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL, |
| QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc(512); |
| expected = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpmem(data, 512, expected, 512); |
| g_free(expected); |
| g_free(data); |
| |
| guest_free(alloc, req_addr); |
| } |
| |
| if (features & (1u << VIRTIO_BLK_F_DISCARD)) { |
| struct virtio_blk_discard_write_zeroes dwz_hdr; |
| |
| req.type = VIRTIO_BLK_T_DISCARD; |
| req.data = (char *) &dwz_hdr; |
| dwz_hdr.sector = 0; |
| dwz_hdr.num_sectors = 1; |
| dwz_hdr.flags = 0; |
| |
| virtio_blk_fix_dwz_hdr(dev, &dwz_hdr); |
| |
| req_addr = virtio_blk_request(alloc, dev, &req, sizeof(dwz_hdr)); |
| |
| free_head = qvirtqueue_add(qts, vq, req_addr, 16, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 16, sizeof(dwz_hdr), false, true); |
| qvirtqueue_add(qts, vq, req_addr + 16 + sizeof(dwz_hdr), 1, true, false); |
| |
| qvirtqueue_kick(qts, dev, vq, free_head); |
| |
| qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL, |
| QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 16 + sizeof(dwz_hdr)); |
| g_assert_cmpint(status, ==, 0); |
| |
| guest_free(alloc, req_addr); |
| } |
| |
| if (features & (1u << VIRTIO_F_ANY_LAYOUT)) { |
| /* Write and read with 2 descriptor layout */ |
| /* Write request */ |
| req.type = VIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 1; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(qts, vq, req_addr, 528, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 528, 1, true, false); |
| qvirtqueue_kick(qts, dev, vq, free_head); |
| |
| qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL, |
| QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| guest_free(alloc, req_addr); |
| |
| /* Read request */ |
| req.type = VIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 1; |
| req.data = g_malloc0(512); |
| |
| req_addr = virtio_blk_request(alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(qts, vq, req_addr, 16, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 16, 513, true, false); |
| |
| qvirtqueue_kick(qts, dev, vq, free_head); |
| |
| qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL, |
| QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| guest_free(alloc, req_addr); |
| } |
| |
| return vq; |
| } |
| |
| static void basic(void *obj, void *data, QGuestAllocator *t_alloc) |
| { |
| QVirtioBlk *blk_if = obj; |
| QVirtQueue *vq; |
| |
| vq = test_basic(blk_if->vdev, t_alloc); |
| qvirtqueue_cleanup(blk_if->vdev->bus, vq, t_alloc); |
| |
| } |
| |
| static void indirect(void *obj, void *u_data, QGuestAllocator *t_alloc) |
| { |
| QVirtQueue *vq; |
| QVirtioBlk *blk_if = obj; |
| QVirtioDevice *dev = blk_if->vdev; |
| QVirtioBlkReq req; |
| QVRingIndirectDesc *indirect; |
| uint64_t req_addr; |
| uint64_t capacity; |
| uint64_t features; |
| uint32_t free_head; |
| uint8_t status; |
| char *data; |
| QTestState *qts = global_qtest; |
| |
| features = qvirtio_get_features(dev); |
| g_assert_cmphex(features & (1u << VIRTIO_RING_F_INDIRECT_DESC), !=, 0); |
| features = features & ~(QVIRTIO_F_BAD_FEATURE | |
| (1u << VIRTIO_RING_F_EVENT_IDX) | |
| (1u << VIRTIO_BLK_F_SCSI)); |
| qvirtio_set_features(dev, features); |
| |
| capacity = qvirtio_config_readq(dev, 0); |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| vq = qvirtqueue_setup(dev, t_alloc, 0); |
| qvirtio_set_driver_ok(dev); |
| |
| /* Write request */ |
| req.type = VIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(t_alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| indirect = qvring_indirect_desc_setup(qts, dev, t_alloc, 2); |
| qvring_indirect_desc_add(dev, qts, indirect, req_addr, 528, false); |
| qvring_indirect_desc_add(dev, qts, indirect, req_addr + 528, 1, true); |
| free_head = qvirtqueue_add_indirect(qts, vq, indirect); |
| qvirtqueue_kick(qts, dev, vq, free_head); |
| |
| qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL, |
| QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| g_free(indirect); |
| guest_free(t_alloc, req_addr); |
| |
| /* Read request */ |
| req.type = VIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(t_alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| indirect = qvring_indirect_desc_setup(qts, dev, t_alloc, 2); |
| qvring_indirect_desc_add(dev, qts, indirect, req_addr, 16, false); |
| qvring_indirect_desc_add(dev, qts, indirect, req_addr + 16, 513, true); |
| free_head = qvirtqueue_add_indirect(qts, vq, indirect); |
| qvirtqueue_kick(qts, dev, vq, free_head); |
| |
| qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL, |
| QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| g_free(indirect); |
| guest_free(t_alloc, req_addr); |
| qvirtqueue_cleanup(dev->bus, vq, t_alloc); |
| } |
| |
| static void config(void *obj, void *data, QGuestAllocator *t_alloc) |
| { |
| QVirtioBlk *blk_if = obj; |
| QVirtioDevice *dev = blk_if->vdev; |
| int n_size = TEST_IMAGE_SIZE / 2; |
| uint64_t features; |
| uint64_t capacity; |
| |
| features = qvirtio_get_features(dev); |
| features = features & ~(QVIRTIO_F_BAD_FEATURE | |
| (1u << VIRTIO_RING_F_INDIRECT_DESC) | |
| (1u << VIRTIO_RING_F_EVENT_IDX) | |
| (1u << VIRTIO_BLK_F_SCSI)); |
| qvirtio_set_features(dev, features); |
| |
| capacity = qvirtio_config_readq(dev, 0); |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| qvirtio_set_driver_ok(dev); |
| |
| qmp_discard_response("{ 'execute': 'block_resize', " |
| " 'arguments': { 'device': 'drive0', " |
| " 'size': %d } }", n_size); |
| qvirtio_wait_config_isr(dev, QVIRTIO_BLK_TIMEOUT_US); |
| |
| capacity = qvirtio_config_readq(dev, 0); |
| g_assert_cmpint(capacity, ==, n_size / 512); |
| } |
| |
| static void msix(void *obj, void *u_data, QGuestAllocator *t_alloc) |
| { |
| QVirtQueue *vq; |
| QVirtioBlkPCI *blk = obj; |
| QVirtioPCIDevice *pdev = &blk->pci_vdev; |
| QVirtioDevice *dev = &pdev->vdev; |
| QVirtioBlkReq req; |
| int n_size = TEST_IMAGE_SIZE / 2; |
| uint64_t req_addr; |
| uint64_t capacity; |
| uint64_t features; |
| uint32_t free_head; |
| uint8_t status; |
| char *data; |
| QOSGraphObject *blk_object = obj; |
| QPCIDevice *pci_dev = blk_object->get_driver(blk_object, "pci-device"); |
| QTestState *qts = global_qtest; |
| |
| if (qpci_check_buggy_msi(pci_dev)) { |
| return; |
| } |
| |
| qpci_msix_enable(pdev->pdev); |
| qvirtio_pci_set_msix_configuration_vector(pdev, t_alloc, 0); |
| |
| features = qvirtio_get_features(dev); |
| features = features & ~(QVIRTIO_F_BAD_FEATURE | |
| (1u << VIRTIO_RING_F_INDIRECT_DESC) | |
| (1u << VIRTIO_RING_F_EVENT_IDX) | |
| (1u << VIRTIO_BLK_F_SCSI)); |
| qvirtio_set_features(dev, features); |
| |
| capacity = qvirtio_config_readq(dev, 0); |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| vq = qvirtqueue_setup(dev, t_alloc, 0); |
| qvirtqueue_pci_msix_setup(pdev, (QVirtQueuePCI *)vq, t_alloc, 1); |
| |
| qvirtio_set_driver_ok(dev); |
| |
| qmp_discard_response("{ 'execute': 'block_resize', " |
| " 'arguments': { 'device': 'drive0', " |
| " 'size': %d } }", n_size); |
| |
| qvirtio_wait_config_isr(dev, QVIRTIO_BLK_TIMEOUT_US); |
| |
| capacity = qvirtio_config_readq(dev, 0); |
| g_assert_cmpint(capacity, ==, n_size / 512); |
| |
| /* Write request */ |
| req.type = VIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(t_alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(qts, vq, req_addr, 16, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 16, 512, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 528, 1, true, false); |
| qvirtqueue_kick(qts, dev, vq, free_head); |
| |
| qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL, |
| QVIRTIO_BLK_TIMEOUT_US); |
| |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| guest_free(t_alloc, req_addr); |
| |
| /* Read request */ |
| req.type = VIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| |
| req_addr = virtio_blk_request(t_alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(qts, vq, req_addr, 16, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 16, 512, true, true); |
| qvirtqueue_add(qts, vq, req_addr + 528, 1, true, false); |
| |
| qvirtqueue_kick(qts, dev, vq, free_head); |
| |
| |
| qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL, |
| QVIRTIO_BLK_TIMEOUT_US); |
| |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| guest_free(t_alloc, req_addr); |
| |
| /* End test */ |
| qpci_msix_disable(pdev->pdev); |
| qvirtqueue_cleanup(dev->bus, vq, t_alloc); |
| } |
| |
| static void idx(void *obj, void *u_data, QGuestAllocator *t_alloc) |
| { |
| QVirtQueue *vq; |
| QVirtioBlkPCI *blk = obj; |
| QVirtioPCIDevice *pdev = &blk->pci_vdev; |
| QVirtioDevice *dev = &pdev->vdev; |
| QVirtioBlkReq req; |
| uint64_t req_addr; |
| uint64_t capacity; |
| uint64_t features; |
| uint32_t free_head; |
| uint32_t write_head; |
| uint32_t desc_idx; |
| uint8_t status; |
| char *data; |
| QOSGraphObject *blk_object = obj; |
| QPCIDevice *pci_dev = blk_object->get_driver(blk_object, "pci-device"); |
| QTestState *qts = global_qtest; |
| |
| if (qpci_check_buggy_msi(pci_dev)) { |
| return; |
| } |
| |
| qpci_msix_enable(pdev->pdev); |
| qvirtio_pci_set_msix_configuration_vector(pdev, t_alloc, 0); |
| |
| features = qvirtio_get_features(dev); |
| features = features & ~(QVIRTIO_F_BAD_FEATURE | |
| (1u << VIRTIO_RING_F_INDIRECT_DESC) | |
| (1u << VIRTIO_F_NOTIFY_ON_EMPTY) | |
| (1u << VIRTIO_BLK_F_SCSI)); |
| qvirtio_set_features(dev, features); |
| |
| capacity = qvirtio_config_readq(dev, 0); |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| vq = qvirtqueue_setup(dev, t_alloc, 0); |
| qvirtqueue_pci_msix_setup(pdev, (QVirtQueuePCI *)vq, t_alloc, 1); |
| |
| qvirtio_set_driver_ok(dev); |
| |
| /* Write request */ |
| req.type = VIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(t_alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(qts, vq, req_addr, 16, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 16, 512, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 528, 1, true, false); |
| qvirtqueue_kick(qts, dev, vq, free_head); |
| |
| qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL, |
| QVIRTIO_BLK_TIMEOUT_US); |
| |
| /* Write request */ |
| req.type = VIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 1; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(t_alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| /* Notify after processing the third request */ |
| qvirtqueue_set_used_event(qts, vq, 2); |
| free_head = qvirtqueue_add(qts, vq, req_addr, 16, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 16, 512, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 528, 1, true, false); |
| qvirtqueue_kick(qts, dev, vq, free_head); |
| write_head = free_head; |
| |
| /* No notification expected */ |
| status = qvirtio_wait_status_byte_no_isr(qts, dev, |
| vq, req_addr + 528, |
| QVIRTIO_BLK_TIMEOUT_US); |
| g_assert_cmpint(status, ==, 0); |
| |
| guest_free(t_alloc, req_addr); |
| |
| /* Read request */ |
| req.type = VIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 1; |
| req.data = g_malloc0(512); |
| |
| req_addr = virtio_blk_request(t_alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(qts, vq, req_addr, 16, false, true); |
| qvirtqueue_add(qts, vq, req_addr + 16, 512, true, true); |
| qvirtqueue_add(qts, vq, req_addr + 528, 1, true, false); |
| |
| qvirtqueue_kick(qts, dev, vq, free_head); |
| |
| /* We get just one notification for both requests */ |
| qvirtio_wait_used_elem(qts, dev, vq, write_head, NULL, |
| QVIRTIO_BLK_TIMEOUT_US); |
| g_assert(qvirtqueue_get_buf(qts, vq, &desc_idx, NULL)); |
| g_assert_cmpint(desc_idx, ==, free_head); |
| |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| guest_free(t_alloc, req_addr); |
| |
| /* End test */ |
| qpci_msix_disable(pdev->pdev); |
| |
| qvirtqueue_cleanup(dev->bus, vq, t_alloc); |
| } |
| |
| static void pci_hotplug(void *obj, void *data, QGuestAllocator *t_alloc) |
| { |
| QVirtioPCIDevice *dev1 = obj; |
| QVirtioPCIDevice *dev; |
| QTestState *qts = dev1->pdev->bus->qts; |
| |
| if (dev1->pdev->bus->not_hotpluggable) { |
| g_test_skip("pci bus does not support hotplug"); |
| return; |
| } |
| |
| /* plug secondary disk */ |
| qtest_qmp_device_add(qts, "virtio-blk-pci", "drv1", |
| "{'addr': %s, 'drive': 'drive1'}", |
| stringify(PCI_SLOT_HP) ".0"); |
| |
| dev = virtio_pci_new(dev1->pdev->bus, |
| &(QPCIAddress) { .devfn = QPCI_DEVFN(PCI_SLOT_HP, 0) }); |
| g_assert_nonnull(dev); |
| g_assert_cmpint(dev->vdev.device_type, ==, VIRTIO_ID_BLOCK); |
| qvirtio_pci_device_disable(dev); |
| qos_object_destroy((QOSGraphObject *)dev); |
| |
| /* unplug secondary disk */ |
| qpci_unplug_acpi_device_test(qts, "drv1", PCI_SLOT_HP); |
| } |
| |
| /* |
| * Check that setting the vring addr on a non-existent virtqueue does |
| * not crash. |
| */ |
| static void test_nonexistent_virtqueue(void *obj, void *data, |
| QGuestAllocator *t_alloc) |
| { |
| QVirtioBlkPCI *blk = obj; |
| QVirtioPCIDevice *pdev = &blk->pci_vdev; |
| QPCIBar bar0; |
| QPCIDevice *dev; |
| |
| dev = qpci_device_find(pdev->pdev->bus, QPCI_DEVFN(4, 0)); |
| g_assert(dev != NULL); |
| qpci_device_enable(dev); |
| |
| bar0 = qpci_iomap(dev, 0, NULL); |
| |
| qpci_io_writeb(dev, bar0, VIRTIO_PCI_QUEUE_SEL, 2); |
| qpci_io_writel(dev, bar0, VIRTIO_PCI_QUEUE_PFN, 1); |
| |
| |
| g_free(dev); |
| } |
| |
| static void resize(void *obj, void *data, QGuestAllocator *t_alloc) |
| { |
| QVirtioBlk *blk_if = obj; |
| QVirtioDevice *dev = blk_if->vdev; |
| int n_size = TEST_IMAGE_SIZE / 2; |
| uint64_t capacity; |
| QVirtQueue *vq; |
| QTestState *qts = global_qtest; |
| |
| vq = test_basic(dev, t_alloc); |
| |
| qmp_discard_response("{ 'execute': 'block_resize', " |
| " 'arguments': { 'device': 'drive0', " |
| " 'size': %d } }", n_size); |
| |
| qvirtio_wait_queue_isr(qts, dev, vq, QVIRTIO_BLK_TIMEOUT_US); |
| |
| capacity = qvirtio_config_readq(dev, 0); |
| g_assert_cmpint(capacity, ==, n_size / 512); |
| |
| qvirtqueue_cleanup(dev->bus, vq, t_alloc); |
| |
| } |
| |
| static void *virtio_blk_test_setup(GString *cmd_line, void *arg) |
| { |
| char *tmp_path = drive_create(); |
| |
| g_string_append_printf(cmd_line, |
| " -drive if=none,id=drive0,file=%s," |
| "format=raw,auto-read-only=off " |
| "-drive if=none,id=drive1,file=null-co://," |
| "file.read-zeroes=on,format=raw ", |
| tmp_path); |
| |
| return arg; |
| } |
| |
| static void register_virtio_blk_test(void) |
| { |
| QOSGraphTestOptions opts = { |
| .before = virtio_blk_test_setup, |
| }; |
| |
| qos_add_test("indirect", "virtio-blk", indirect, &opts); |
| qos_add_test("config", "virtio-blk", config, &opts); |
| qos_add_test("basic", "virtio-blk", basic, &opts); |
| qos_add_test("resize", "virtio-blk", resize, &opts); |
| |
| /* tests just for virtio-blk-pci */ |
| qos_add_test("msix", "virtio-blk-pci", msix, &opts); |
| qos_add_test("idx", "virtio-blk-pci", idx, &opts); |
| qos_add_test("nxvirtq", "virtio-blk-pci", |
| test_nonexistent_virtqueue, &opts); |
| qos_add_test("hotplug", "virtio-blk-pci", pci_hotplug, &opts); |
| } |
| |
| libqos_init(register_virtio_blk_test); |