| /* |
| * Copyright (c) 2005 Cisco Systems. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| * |
| */ |
| |
| #ifndef SCSI_SRP_H |
| #define SCSI_SRP_H |
| |
| /* |
| * Structures and constants for the SCSI RDMA Protocol (SRP) as |
| * defined by the INCITS T10 committee. This file was written using |
| * draft Revision 16a of the SRP standard. |
| */ |
| |
| enum { |
| |
| SRP_LOGIN_REQ = 0x00, |
| SRP_TSK_MGMT = 0x01, |
| SRP_CMD = 0x02, |
| SRP_I_LOGOUT = 0x03, |
| SRP_LOGIN_RSP = 0xc0, |
| SRP_RSP = 0xc1, |
| SRP_LOGIN_REJ = 0xc2, |
| SRP_T_LOGOUT = 0x80, |
| SRP_CRED_REQ = 0x81, |
| SRP_AER_REQ = 0x82, |
| SRP_CRED_RSP = 0x41, |
| SRP_AER_RSP = 0x42 |
| }; |
| |
| enum { |
| SRP_BUF_FORMAT_DIRECT = 1 << 1, |
| SRP_BUF_FORMAT_INDIRECT = 1 << 2 |
| }; |
| |
| enum { |
| SRP_NO_DATA_DESC = 0, |
| SRP_DATA_DESC_DIRECT = 1, |
| SRP_DATA_DESC_INDIRECT = 2 |
| }; |
| |
| enum { |
| SRP_TSK_ABORT_TASK = 0x01, |
| SRP_TSK_ABORT_TASK_SET = 0x02, |
| SRP_TSK_CLEAR_TASK_SET = 0x04, |
| SRP_TSK_LUN_RESET = 0x08, |
| SRP_TSK_CLEAR_ACA = 0x40 |
| }; |
| |
| enum srp_login_rej_reason { |
| SRP_LOGIN_REJ_UNABLE_ESTABLISH_CHANNEL = 0x00010000, |
| SRP_LOGIN_REJ_INSUFFICIENT_RESOURCES = 0x00010001, |
| SRP_LOGIN_REJ_REQ_IT_IU_LENGTH_TOO_LARGE = 0x00010002, |
| SRP_LOGIN_REJ_UNABLE_ASSOCIATE_CHANNEL = 0x00010003, |
| SRP_LOGIN_REJ_UNSUPPORTED_DESCRIPTOR_FMT = 0x00010004, |
| SRP_LOGIN_REJ_MULTI_CHANNEL_UNSUPPORTED = 0x00010005, |
| SRP_LOGIN_REJ_CHANNEL_LIMIT_REACHED = 0x00010006 |
| }; |
| |
| enum { |
| SRP_REV10_IB_IO_CLASS = 0xff00, |
| SRP_REV16A_IB_IO_CLASS = 0x0100 |
| }; |
| |
| enum { |
| SRP_TSK_MGMT_COMPLETE = 0x00, |
| SRP_TSK_MGMT_FIELDS_INVALID = 0x02, |
| SRP_TSK_MGMT_NOT_SUPPORTED = 0x04, |
| SRP_TSK_MGMT_FAILED = 0x05 |
| }; |
| |
| struct srp_direct_buf { |
| uint64_t va; |
| uint32_t key; |
| uint32_t len; |
| }; |
| |
| /* |
| * We need the packed attribute because the SRP spec puts the list of |
| * descriptors at an offset of 20, which is not aligned to the size of |
| * struct srp_direct_buf. The whole structure must be packed to avoid |
| * having the 20-byte structure padded to 24 bytes on 64-bit architectures. |
| */ |
| struct srp_indirect_buf { |
| struct srp_direct_buf table_desc; |
| uint32_t len; |
| struct srp_direct_buf desc_list[0]; |
| } QEMU_PACKED; |
| |
| enum { |
| SRP_MULTICHAN_SINGLE = 0, |
| SRP_MULTICHAN_MULTI = 1 |
| }; |
| |
| struct srp_login_req { |
| uint8_t opcode; |
| uint8_t reserved1[7]; |
| uint64_t tag; |
| uint32_t req_it_iu_len; |
| uint8_t reserved2[4]; |
| uint16_t req_buf_fmt; |
| uint8_t req_flags; |
| uint8_t reserved3[5]; |
| uint8_t initiator_port_id[16]; |
| uint8_t target_port_id[16]; |
| }; |
| |
| /* |
| * The SRP spec defines the size of the LOGIN_RSP structure to be 52 |
| * bytes, so it needs to be packed to avoid having it padded to 56 |
| * bytes on 64-bit architectures. |
| */ |
| struct srp_login_rsp { |
| uint8_t opcode; |
| uint8_t reserved1[3]; |
| uint32_t req_lim_delta; |
| uint64_t tag; |
| uint32_t max_it_iu_len; |
| uint32_t max_ti_iu_len; |
| uint16_t buf_fmt; |
| uint8_t rsp_flags; |
| uint8_t reserved2[25]; |
| } QEMU_PACKED; |
| |
| struct srp_login_rej { |
| uint8_t opcode; |
| uint8_t reserved1[3]; |
| uint32_t reason; |
| uint64_t tag; |
| uint8_t reserved2[8]; |
| uint16_t buf_fmt; |
| uint8_t reserved3[6]; |
| }; |
| |
| struct srp_i_logout { |
| uint8_t opcode; |
| uint8_t reserved[7]; |
| uint64_t tag; |
| }; |
| |
| struct srp_t_logout { |
| uint8_t opcode; |
| uint8_t sol_not; |
| uint8_t reserved[2]; |
| uint32_t reason; |
| uint64_t tag; |
| }; |
| |
| /* |
| * We need the packed attribute because the SRP spec only aligns the |
| * 8-byte LUN field to 4 bytes. |
| */ |
| struct srp_tsk_mgmt { |
| uint8_t opcode; |
| uint8_t sol_not; |
| uint8_t reserved1[6]; |
| uint64_t tag; |
| uint8_t reserved2[4]; |
| uint64_t lun; |
| uint8_t reserved3[2]; |
| uint8_t tsk_mgmt_func; |
| uint8_t reserved4; |
| uint64_t task_tag; |
| uint8_t reserved5[8]; |
| } QEMU_PACKED; |
| |
| /* |
| * We need the packed attribute because the SRP spec only aligns the |
| * 8-byte LUN field to 4 bytes. |
| */ |
| struct srp_cmd { |
| uint8_t opcode; |
| uint8_t sol_not; |
| uint8_t reserved1[3]; |
| uint8_t buf_fmt; |
| uint8_t data_out_desc_cnt; |
| uint8_t data_in_desc_cnt; |
| uint64_t tag; |
| uint8_t reserved2[4]; |
| uint64_t lun; |
| uint8_t reserved3; |
| uint8_t task_attr; |
| uint8_t reserved4; |
| uint8_t add_cdb_len; |
| uint8_t cdb[16]; |
| uint8_t add_data[0]; |
| } QEMU_PACKED; |
| |
| enum { |
| SRP_RSP_FLAG_RSPVALID = 1 << 0, |
| SRP_RSP_FLAG_SNSVALID = 1 << 1, |
| SRP_RSP_FLAG_DOOVER = 1 << 2, |
| SRP_RSP_FLAG_DOUNDER = 1 << 3, |
| SRP_RSP_FLAG_DIOVER = 1 << 4, |
| SRP_RSP_FLAG_DIUNDER = 1 << 5 |
| }; |
| |
| /* |
| * The SRP spec defines the size of the RSP structure to be 36 bytes, |
| * so it needs to be packed to avoid having it padded to 40 bytes on |
| * 64-bit architectures. |
| */ |
| struct srp_rsp { |
| uint8_t opcode; |
| uint8_t sol_not; |
| uint8_t reserved1[2]; |
| uint32_t req_lim_delta; |
| uint64_t tag; |
| uint8_t reserved2[2]; |
| uint8_t flags; |
| uint8_t status; |
| uint32_t data_out_res_cnt; |
| uint32_t data_in_res_cnt; |
| uint32_t sense_data_len; |
| uint32_t resp_data_len; |
| uint8_t data[0]; |
| } QEMU_PACKED; |
| |
| #endif /* SCSI_SRP_H */ |