| /* |
| * QEMU model of the LatticeMico32 timer block. |
| * |
| * Copyright (c) 2010 Michael Walle <michael@walle.cc> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * |
| * Specification available at: |
| * http://www.latticesemi.com/documents/mico32timer.pdf |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/hw.h" |
| #include "hw/sysbus.h" |
| #include "trace.h" |
| #include "qemu/timer.h" |
| #include "hw/ptimer.h" |
| #include "qemu/error-report.h" |
| #include "qemu/main-loop.h" |
| |
| #define DEFAULT_FREQUENCY (50*1000000) |
| |
| enum { |
| R_SR = 0, |
| R_CR, |
| R_PERIOD, |
| R_SNAPSHOT, |
| R_MAX |
| }; |
| |
| enum { |
| SR_TO = (1 << 0), |
| SR_RUN = (1 << 1), |
| }; |
| |
| enum { |
| CR_ITO = (1 << 0), |
| CR_CONT = (1 << 1), |
| CR_START = (1 << 2), |
| CR_STOP = (1 << 3), |
| }; |
| |
| #define TYPE_LM32_TIMER "lm32-timer" |
| #define LM32_TIMER(obj) OBJECT_CHECK(LM32TimerState, (obj), TYPE_LM32_TIMER) |
| |
| struct LM32TimerState { |
| SysBusDevice parent_obj; |
| |
| MemoryRegion iomem; |
| |
| QEMUBH *bh; |
| ptimer_state *ptimer; |
| |
| qemu_irq irq; |
| uint32_t freq_hz; |
| |
| uint32_t regs[R_MAX]; |
| }; |
| typedef struct LM32TimerState LM32TimerState; |
| |
| static void timer_update_irq(LM32TimerState *s) |
| { |
| int state = (s->regs[R_SR] & SR_TO) && (s->regs[R_CR] & CR_ITO); |
| |
| trace_lm32_timer_irq_state(state); |
| qemu_set_irq(s->irq, state); |
| } |
| |
| static uint64_t timer_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| LM32TimerState *s = opaque; |
| uint32_t r = 0; |
| |
| addr >>= 2; |
| switch (addr) { |
| case R_SR: |
| case R_CR: |
| case R_PERIOD: |
| r = s->regs[addr]; |
| break; |
| case R_SNAPSHOT: |
| r = (uint32_t)ptimer_get_count(s->ptimer); |
| break; |
| default: |
| error_report("lm32_timer: read access to unknown register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| } |
| |
| trace_lm32_timer_memory_read(addr << 2, r); |
| return r; |
| } |
| |
| static void timer_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| LM32TimerState *s = opaque; |
| |
| trace_lm32_timer_memory_write(addr, value); |
| |
| addr >>= 2; |
| switch (addr) { |
| case R_SR: |
| s->regs[R_SR] &= ~SR_TO; |
| break; |
| case R_CR: |
| s->regs[R_CR] = value; |
| if (s->regs[R_CR] & CR_START) { |
| ptimer_run(s->ptimer, 1); |
| } |
| if (s->regs[R_CR] & CR_STOP) { |
| ptimer_stop(s->ptimer); |
| } |
| break; |
| case R_PERIOD: |
| s->regs[R_PERIOD] = value; |
| ptimer_set_count(s->ptimer, value); |
| break; |
| case R_SNAPSHOT: |
| error_report("lm32_timer: write access to read only register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| default: |
| error_report("lm32_timer: write access to unknown register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| } |
| timer_update_irq(s); |
| } |
| |
| static const MemoryRegionOps timer_ops = { |
| .read = timer_read, |
| .write = timer_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| }; |
| |
| static void timer_hit(void *opaque) |
| { |
| LM32TimerState *s = opaque; |
| |
| trace_lm32_timer_hit(); |
| |
| s->regs[R_SR] |= SR_TO; |
| |
| if (s->regs[R_CR] & CR_CONT) { |
| ptimer_set_count(s->ptimer, s->regs[R_PERIOD]); |
| ptimer_run(s->ptimer, 1); |
| } |
| timer_update_irq(s); |
| } |
| |
| static void timer_reset(DeviceState *d) |
| { |
| LM32TimerState *s = LM32_TIMER(d); |
| int i; |
| |
| for (i = 0; i < R_MAX; i++) { |
| s->regs[i] = 0; |
| } |
| ptimer_stop(s->ptimer); |
| } |
| |
| static void lm32_timer_init(Object *obj) |
| { |
| LM32TimerState *s = LM32_TIMER(obj); |
| SysBusDevice *dev = SYS_BUS_DEVICE(obj); |
| |
| sysbus_init_irq(dev, &s->irq); |
| |
| s->bh = qemu_bh_new(timer_hit, s); |
| s->ptimer = ptimer_init(s->bh, PTIMER_POLICY_DEFAULT); |
| |
| memory_region_init_io(&s->iomem, obj, &timer_ops, s, |
| "timer", R_MAX * 4); |
| sysbus_init_mmio(dev, &s->iomem); |
| } |
| |
| static void lm32_timer_realize(DeviceState *dev, Error **errp) |
| { |
| LM32TimerState *s = LM32_TIMER(dev); |
| |
| ptimer_set_freq(s->ptimer, s->freq_hz); |
| } |
| |
| static const VMStateDescription vmstate_lm32_timer = { |
| .name = "lm32-timer", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_PTIMER(ptimer, LM32TimerState), |
| VMSTATE_UINT32(freq_hz, LM32TimerState), |
| VMSTATE_UINT32_ARRAY(regs, LM32TimerState, R_MAX), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static Property lm32_timer_properties[] = { |
| DEFINE_PROP_UINT32("frequency", LM32TimerState, freq_hz, DEFAULT_FREQUENCY), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void lm32_timer_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = lm32_timer_realize; |
| dc->reset = timer_reset; |
| dc->vmsd = &vmstate_lm32_timer; |
| dc->props = lm32_timer_properties; |
| } |
| |
| static const TypeInfo lm32_timer_info = { |
| .name = TYPE_LM32_TIMER, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(LM32TimerState), |
| .instance_init = lm32_timer_init, |
| .class_init = lm32_timer_class_init, |
| }; |
| |
| static void lm32_timer_register_types(void) |
| { |
| type_register_static(&lm32_timer_info); |
| } |
| |
| type_init(lm32_timer_register_types) |