| /* |
| * QEMU Motorla 680x0 Macintosh hardware System Emulator |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/units.h" |
| #include "qemu/datadir.h" |
| #include "qemu/guest-random.h" |
| #include "sysemu/sysemu.h" |
| #include "cpu.h" |
| #include "hw/boards.h" |
| #include "hw/or-irq.h" |
| #include "hw/nmi.h" |
| #include "elf.h" |
| #include "hw/loader.h" |
| #include "ui/console.h" |
| #include "hw/char/escc.h" |
| #include "hw/sysbus.h" |
| #include "hw/scsi/esp.h" |
| #include "standard-headers/asm-m68k/bootinfo.h" |
| #include "standard-headers/asm-m68k/bootinfo-mac.h" |
| #include "bootinfo.h" |
| #include "hw/misc/mac_via.h" |
| #include "hw/input/adb.h" |
| #include "hw/nubus/mac-nubus-bridge.h" |
| #include "hw/display/macfb.h" |
| #include "hw/block/swim.h" |
| #include "net/net.h" |
| #include "qapi/error.h" |
| #include "qemu/error-report.h" |
| #include "sysemu/qtest.h" |
| #include "sysemu/runstate.h" |
| #include "sysemu/reset.h" |
| #include "migration/vmstate.h" |
| |
| #define MACROM_ADDR 0x40800000 |
| #define MACROM_SIZE 0x00100000 |
| |
| #define MACROM_FILENAME "MacROM.bin" |
| |
| #define IO_BASE 0x50000000 |
| #define IO_SLICE 0x00040000 |
| #define IO_SIZE 0x04000000 |
| |
| #define VIA_BASE (IO_BASE + 0x00000) |
| #define SONIC_PROM_BASE (IO_BASE + 0x08000) |
| #define SONIC_BASE (IO_BASE + 0x0a000) |
| #define SCC_BASE (IO_BASE + 0x0c020) |
| #define ESP_BASE (IO_BASE + 0x10000) |
| #define ESP_PDMA (IO_BASE + 0x10100) |
| #define ASC_BASE (IO_BASE + 0x14000) |
| #define SWIM_BASE (IO_BASE + 0x1E000) |
| |
| #define SONIC_PROM_SIZE 0x1000 |
| |
| /* |
| * the video base, whereas it a Nubus address, |
| * is needed by the kernel to have early display and |
| * thus provided by the bootloader |
| */ |
| #define VIDEO_BASE 0xf9000000 |
| |
| #define MAC_CLOCK 3686418 |
| |
| /* |
| * Slot 0x9 is reserved for use by the in-built framebuffer whilst only |
| * slots 0xc, 0xd and 0xe physically exist on the Quadra 800 |
| */ |
| #define Q800_NUBUS_SLOTS_AVAILABLE (BIT(0x9) | BIT(0xc) | BIT(0xd) | \ |
| BIT(0xe)) |
| |
| /* |
| * The GLUE (General Logic Unit) is an Apple custom integrated circuit chip |
| * that performs a variety of functions (RAM management, clock generation, ...). |
| * The GLUE chip receives interrupt requests from various devices, |
| * assign priority to each, and asserts one or more interrupt line to the |
| * CPU. |
| */ |
| |
| #define TYPE_GLUE "q800-glue" |
| OBJECT_DECLARE_SIMPLE_TYPE(GLUEState, GLUE) |
| |
| struct GLUEState { |
| SysBusDevice parent_obj; |
| M68kCPU *cpu; |
| uint8_t ipr; |
| uint8_t auxmode; |
| qemu_irq irqs[1]; |
| QEMUTimer *nmi_release; |
| }; |
| |
| #define GLUE_IRQ_IN_VIA1 0 |
| #define GLUE_IRQ_IN_VIA2 1 |
| #define GLUE_IRQ_IN_SONIC 2 |
| #define GLUE_IRQ_IN_ESCC 3 |
| #define GLUE_IRQ_IN_NMI 4 |
| |
| #define GLUE_IRQ_NUBUS_9 0 |
| |
| /* |
| * The GLUE logic on the Quadra 800 supports 2 different IRQ routing modes |
| * controlled from the VIA1 auxmode GPIO (port B bit 6) which are documented |
| * in NetBSD as follows: |
| * |
| * A/UX mode (Linux, NetBSD, auxmode GPIO low) |
| * |
| * Level 0: Spurious: ignored |
| * Level 1: Software |
| * Level 2: VIA2 (except ethernet, sound) |
| * Level 3: Ethernet |
| * Level 4: Serial (SCC) |
| * Level 5: Sound |
| * Level 6: VIA1 |
| * Level 7: NMIs: parity errors, RESET button, YANCC error |
| * |
| * Classic mode (default: used by MacOS, A/UX 3.0.1, auxmode GPIO high) |
| * |
| * Level 0: Spurious: ignored |
| * Level 1: VIA1 (clock, ADB) |
| * Level 2: VIA2 (NuBus, SCSI) |
| * Level 3: |
| * Level 4: Serial (SCC) |
| * Level 5: |
| * Level 6: |
| * Level 7: Non-maskable: parity errors, RESET button |
| * |
| * Note that despite references to A/UX mode in Linux and NetBSD, at least |
| * A/UX 3.0.1 still uses Classic mode. |
| */ |
| |
| static void GLUE_set_irq(void *opaque, int irq, int level) |
| { |
| GLUEState *s = opaque; |
| int i; |
| |
| if (s->auxmode) { |
| /* Classic mode */ |
| switch (irq) { |
| case GLUE_IRQ_IN_VIA1: |
| irq = 0; |
| break; |
| |
| case GLUE_IRQ_IN_VIA2: |
| irq = 1; |
| break; |
| |
| case GLUE_IRQ_IN_SONIC: |
| /* Route to VIA2 instead */ |
| qemu_set_irq(s->irqs[GLUE_IRQ_NUBUS_9], level); |
| return; |
| |
| case GLUE_IRQ_IN_ESCC: |
| irq = 3; |
| break; |
| |
| case GLUE_IRQ_IN_NMI: |
| irq = 6; |
| break; |
| |
| default: |
| g_assert_not_reached(); |
| } |
| } else { |
| /* A/UX mode */ |
| switch (irq) { |
| case GLUE_IRQ_IN_VIA1: |
| irq = 5; |
| break; |
| |
| case GLUE_IRQ_IN_VIA2: |
| irq = 1; |
| break; |
| |
| case GLUE_IRQ_IN_SONIC: |
| irq = 2; |
| break; |
| |
| case GLUE_IRQ_IN_ESCC: |
| irq = 3; |
| break; |
| |
| case GLUE_IRQ_IN_NMI: |
| irq = 6; |
| break; |
| |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| if (level) { |
| s->ipr |= 1 << irq; |
| } else { |
| s->ipr &= ~(1 << irq); |
| } |
| |
| for (i = 7; i >= 0; i--) { |
| if ((s->ipr >> i) & 1) { |
| m68k_set_irq_level(s->cpu, i + 1, i + 25); |
| return; |
| } |
| } |
| m68k_set_irq_level(s->cpu, 0, 0); |
| } |
| |
| static void glue_auxmode_set_irq(void *opaque, int irq, int level) |
| { |
| GLUEState *s = GLUE(opaque); |
| |
| s->auxmode = level; |
| } |
| |
| static void glue_nmi(NMIState *n, int cpu_index, Error **errp) |
| { |
| GLUEState *s = GLUE(n); |
| |
| /* Hold NMI active for 100ms */ |
| GLUE_set_irq(s, GLUE_IRQ_IN_NMI, 1); |
| timer_mod(s->nmi_release, qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + 100); |
| } |
| |
| static void glue_nmi_release(void *opaque) |
| { |
| GLUEState *s = GLUE(opaque); |
| |
| GLUE_set_irq(s, GLUE_IRQ_IN_NMI, 0); |
| } |
| |
| static void glue_reset(DeviceState *dev) |
| { |
| GLUEState *s = GLUE(dev); |
| |
| s->ipr = 0; |
| s->auxmode = 0; |
| |
| timer_del(s->nmi_release); |
| } |
| |
| static const VMStateDescription vmstate_glue = { |
| .name = "q800-glue", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT8(ipr, GLUEState), |
| VMSTATE_UINT8(auxmode, GLUEState), |
| VMSTATE_TIMER_PTR(nmi_release, GLUEState), |
| VMSTATE_END_OF_LIST(), |
| }, |
| }; |
| |
| /* |
| * If the m68k CPU implemented its inbound irq lines as GPIO lines |
| * rather than via the m68k_set_irq_level() function we would not need |
| * this cpu link property and could instead provide outbound IRQ lines |
| * that the board could wire up to the CPU. |
| */ |
| static Property glue_properties[] = { |
| DEFINE_PROP_LINK("cpu", GLUEState, cpu, TYPE_M68K_CPU, M68kCPU *), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void glue_finalize(Object *obj) |
| { |
| GLUEState *s = GLUE(obj); |
| |
| timer_free(s->nmi_release); |
| } |
| |
| static void glue_init(Object *obj) |
| { |
| DeviceState *dev = DEVICE(obj); |
| GLUEState *s = GLUE(dev); |
| |
| qdev_init_gpio_in(dev, GLUE_set_irq, 8); |
| qdev_init_gpio_in_named(dev, glue_auxmode_set_irq, "auxmode", 1); |
| |
| qdev_init_gpio_out(dev, s->irqs, 1); |
| |
| /* NMI release timer */ |
| s->nmi_release = timer_new_ms(QEMU_CLOCK_VIRTUAL, glue_nmi_release, s); |
| } |
| |
| static void glue_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| NMIClass *nc = NMI_CLASS(klass); |
| |
| dc->vmsd = &vmstate_glue; |
| dc->reset = glue_reset; |
| device_class_set_props(dc, glue_properties); |
| nc->nmi_monitor_handler = glue_nmi; |
| } |
| |
| static const TypeInfo glue_info = { |
| .name = TYPE_GLUE, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(GLUEState), |
| .instance_init = glue_init, |
| .instance_finalize = glue_finalize, |
| .class_init = glue_class_init, |
| .interfaces = (InterfaceInfo[]) { |
| { TYPE_NMI }, |
| { } |
| }, |
| }; |
| |
| static void main_cpu_reset(void *opaque) |
| { |
| M68kCPU *cpu = opaque; |
| CPUState *cs = CPU(cpu); |
| |
| cpu_reset(cs); |
| cpu->env.aregs[7] = ldl_phys(cs->as, 0); |
| cpu->env.pc = ldl_phys(cs->as, 4); |
| } |
| |
| static void rerandomize_rng_seed(void *opaque) |
| { |
| struct bi_record *rng_seed = opaque; |
| qemu_guest_getrandom_nofail((void *)rng_seed->data + 2, |
| be16_to_cpu(*(uint16_t *)rng_seed->data)); |
| } |
| |
| static uint8_t fake_mac_rom[] = { |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| |
| /* offset: 0xa - mac_reset */ |
| |
| /* via2[vDirB] |= VIA2B_vPower */ |
| 0x20, 0x7C, 0x50, 0xF0, 0x24, 0x00, /* moveal VIA2_BASE+vDirB,%a0 */ |
| 0x10, 0x10, /* moveb %a0@,%d0 */ |
| 0x00, 0x00, 0x00, 0x04, /* orib #4,%d0 */ |
| 0x10, 0x80, /* moveb %d0,%a0@ */ |
| |
| /* via2[vBufB] &= ~VIA2B_vPower */ |
| 0x20, 0x7C, 0x50, 0xF0, 0x20, 0x00, /* moveal VIA2_BASE+vBufB,%a0 */ |
| 0x10, 0x10, /* moveb %a0@,%d0 */ |
| 0x02, 0x00, 0xFF, 0xFB, /* andib #-5,%d0 */ |
| 0x10, 0x80, /* moveb %d0,%a0@ */ |
| |
| /* while (true) ; */ |
| 0x60, 0xFE /* bras [self] */ |
| }; |
| |
| static void q800_init(MachineState *machine) |
| { |
| M68kCPU *cpu = NULL; |
| int linux_boot; |
| int32_t kernel_size; |
| uint64_t elf_entry; |
| char *filename; |
| int bios_size; |
| ram_addr_t initrd_base; |
| int32_t initrd_size; |
| MemoryRegion *rom; |
| MemoryRegion *io; |
| MemoryRegion *dp8393x_prom = g_new(MemoryRegion, 1); |
| uint8_t *prom; |
| const int io_slice_nb = (IO_SIZE / IO_SLICE) - 1; |
| int i, checksum; |
| MacFbMode *macfb_mode; |
| ram_addr_t ram_size = machine->ram_size; |
| const char *kernel_filename = machine->kernel_filename; |
| const char *initrd_filename = machine->initrd_filename; |
| const char *kernel_cmdline = machine->kernel_cmdline; |
| const char *bios_name = machine->firmware ?: MACROM_FILENAME; |
| hwaddr parameters_base; |
| CPUState *cs; |
| DeviceState *dev; |
| DeviceState *via1_dev, *via2_dev; |
| DeviceState *escc_orgate; |
| SysBusESPState *sysbus_esp; |
| ESPState *esp; |
| SysBusDevice *sysbus; |
| BusState *adb_bus; |
| NubusBus *nubus; |
| DeviceState *glue; |
| DriveInfo *dinfo; |
| uint8_t rng_seed[32]; |
| |
| linux_boot = (kernel_filename != NULL); |
| |
| if (ram_size > 1 * GiB) { |
| error_report("Too much memory for this machine: %" PRId64 " MiB, " |
| "maximum 1024 MiB", ram_size / MiB); |
| exit(1); |
| } |
| |
| /* init CPUs */ |
| cpu = M68K_CPU(cpu_create(machine->cpu_type)); |
| qemu_register_reset(main_cpu_reset, cpu); |
| |
| /* RAM */ |
| memory_region_add_subregion(get_system_memory(), 0, machine->ram); |
| |
| /* |
| * Memory from IO_BASE to IO_BASE + IO_SLICE is repeated |
| * from IO_BASE + IO_SLICE to IO_BASE + IO_SIZE |
| */ |
| io = g_new(MemoryRegion, io_slice_nb); |
| for (i = 0; i < io_slice_nb; i++) { |
| char *name = g_strdup_printf("mac_m68k.io[%d]", i + 1); |
| |
| memory_region_init_alias(&io[i], NULL, name, get_system_memory(), |
| IO_BASE, IO_SLICE); |
| memory_region_add_subregion(get_system_memory(), |
| IO_BASE + (i + 1) * IO_SLICE, &io[i]); |
| g_free(name); |
| } |
| |
| /* IRQ Glue */ |
| glue = qdev_new(TYPE_GLUE); |
| object_property_set_link(OBJECT(glue), "cpu", OBJECT(cpu), &error_abort); |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(glue), &error_fatal); |
| |
| /* VIA 1 */ |
| via1_dev = qdev_new(TYPE_MOS6522_Q800_VIA1); |
| dinfo = drive_get(IF_MTD, 0, 0); |
| if (dinfo) { |
| qdev_prop_set_drive(via1_dev, "drive", blk_by_legacy_dinfo(dinfo)); |
| } |
| sysbus = SYS_BUS_DEVICE(via1_dev); |
| sysbus_realize_and_unref(sysbus, &error_fatal); |
| sysbus_mmio_map(sysbus, 1, VIA_BASE); |
| sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, GLUE_IRQ_IN_VIA1)); |
| /* A/UX mode */ |
| qdev_connect_gpio_out(via1_dev, 0, |
| qdev_get_gpio_in_named(glue, "auxmode", 0)); |
| |
| adb_bus = qdev_get_child_bus(via1_dev, "adb.0"); |
| dev = qdev_new(TYPE_ADB_KEYBOARD); |
| qdev_realize_and_unref(dev, adb_bus, &error_fatal); |
| dev = qdev_new(TYPE_ADB_MOUSE); |
| qdev_realize_and_unref(dev, adb_bus, &error_fatal); |
| |
| /* VIA 2 */ |
| via2_dev = qdev_new(TYPE_MOS6522_Q800_VIA2); |
| sysbus = SYS_BUS_DEVICE(via2_dev); |
| sysbus_realize_and_unref(sysbus, &error_fatal); |
| sysbus_mmio_map(sysbus, 1, VIA_BASE + VIA_SIZE); |
| sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, GLUE_IRQ_IN_VIA2)); |
| |
| /* MACSONIC */ |
| |
| if (nb_nics > 1) { |
| error_report("q800 can only have one ethernet interface"); |
| exit(1); |
| } |
| |
| qemu_check_nic_model(&nd_table[0], "dp83932"); |
| |
| /* |
| * MacSonic driver needs an Apple MAC address |
| * Valid prefix are: |
| * 00:05:02 Apple |
| * 00:80:19 Dayna Communications, Inc. |
| * 00:A0:40 Apple |
| * 08:00:07 Apple |
| * (Q800 use the last one) |
| */ |
| nd_table[0].macaddr.a[0] = 0x08; |
| nd_table[0].macaddr.a[1] = 0x00; |
| nd_table[0].macaddr.a[2] = 0x07; |
| |
| dev = qdev_new("dp8393x"); |
| qdev_set_nic_properties(dev, &nd_table[0]); |
| qdev_prop_set_uint8(dev, "it_shift", 2); |
| qdev_prop_set_bit(dev, "big_endian", true); |
| object_property_set_link(OBJECT(dev), "dma_mr", |
| OBJECT(get_system_memory()), &error_abort); |
| sysbus = SYS_BUS_DEVICE(dev); |
| sysbus_realize_and_unref(sysbus, &error_fatal); |
| sysbus_mmio_map(sysbus, 0, SONIC_BASE); |
| sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(glue, GLUE_IRQ_IN_SONIC)); |
| |
| memory_region_init_rom(dp8393x_prom, NULL, "dp8393x-q800.prom", |
| SONIC_PROM_SIZE, &error_fatal); |
| memory_region_add_subregion(get_system_memory(), SONIC_PROM_BASE, |
| dp8393x_prom); |
| |
| /* Add MAC address with valid checksum to PROM */ |
| prom = memory_region_get_ram_ptr(dp8393x_prom); |
| checksum = 0; |
| for (i = 0; i < 6; i++) { |
| prom[i] = revbit8(nd_table[0].macaddr.a[i]); |
| checksum ^= prom[i]; |
| } |
| prom[7] = 0xff - checksum; |
| |
| /* SCC */ |
| |
| dev = qdev_new(TYPE_ESCC); |
| qdev_prop_set_uint32(dev, "disabled", 0); |
| qdev_prop_set_uint32(dev, "frequency", MAC_CLOCK); |
| qdev_prop_set_uint32(dev, "it_shift", 1); |
| qdev_prop_set_bit(dev, "bit_swap", true); |
| qdev_prop_set_chr(dev, "chrA", serial_hd(0)); |
| qdev_prop_set_chr(dev, "chrB", serial_hd(1)); |
| qdev_prop_set_uint32(dev, "chnBtype", 0); |
| qdev_prop_set_uint32(dev, "chnAtype", 0); |
| sysbus = SYS_BUS_DEVICE(dev); |
| sysbus_realize_and_unref(sysbus, &error_fatal); |
| |
| /* Logically OR both its IRQs together */ |
| escc_orgate = DEVICE(object_new(TYPE_OR_IRQ)); |
| object_property_set_int(OBJECT(escc_orgate), "num-lines", 2, &error_fatal); |
| qdev_realize_and_unref(escc_orgate, NULL, &error_fatal); |
| sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(escc_orgate, 0)); |
| sysbus_connect_irq(sysbus, 1, qdev_get_gpio_in(escc_orgate, 1)); |
| qdev_connect_gpio_out(escc_orgate, 0, |
| qdev_get_gpio_in(glue, GLUE_IRQ_IN_ESCC)); |
| sysbus_mmio_map(sysbus, 0, SCC_BASE); |
| |
| /* SCSI */ |
| |
| dev = qdev_new(TYPE_SYSBUS_ESP); |
| sysbus_esp = SYSBUS_ESP(dev); |
| esp = &sysbus_esp->esp; |
| esp->dma_memory_read = NULL; |
| esp->dma_memory_write = NULL; |
| esp->dma_opaque = NULL; |
| sysbus_esp->it_shift = 4; |
| esp->dma_enabled = 1; |
| |
| sysbus = SYS_BUS_DEVICE(dev); |
| sysbus_realize_and_unref(sysbus, &error_fatal); |
| /* SCSI and SCSI data IRQs are negative edge triggered */ |
| sysbus_connect_irq(sysbus, 0, qemu_irq_invert(qdev_get_gpio_in(via2_dev, |
| VIA2_IRQ_SCSI_BIT))); |
| sysbus_connect_irq(sysbus, 1, qemu_irq_invert(qdev_get_gpio_in(via2_dev, |
| VIA2_IRQ_SCSI_DATA_BIT))); |
| sysbus_mmio_map(sysbus, 0, ESP_BASE); |
| sysbus_mmio_map(sysbus, 1, ESP_PDMA); |
| |
| scsi_bus_legacy_handle_cmdline(&esp->bus); |
| |
| /* SWIM floppy controller */ |
| |
| dev = qdev_new(TYPE_SWIM); |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, SWIM_BASE); |
| |
| /* NuBus */ |
| |
| dev = qdev_new(TYPE_MAC_NUBUS_BRIDGE); |
| qdev_prop_set_uint32(dev, "slot-available-mask", |
| Q800_NUBUS_SLOTS_AVAILABLE); |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, |
| MAC_NUBUS_FIRST_SLOT * NUBUS_SUPER_SLOT_SIZE); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, NUBUS_SLOT_BASE + |
| MAC_NUBUS_FIRST_SLOT * NUBUS_SLOT_SIZE); |
| qdev_connect_gpio_out(dev, 9, |
| qdev_get_gpio_in_named(via2_dev, "nubus-irq", |
| VIA2_NUBUS_IRQ_INTVIDEO)); |
| for (i = 1; i < VIA2_NUBUS_IRQ_NB; i++) { |
| qdev_connect_gpio_out(dev, 9 + i, |
| qdev_get_gpio_in_named(via2_dev, "nubus-irq", |
| VIA2_NUBUS_IRQ_9 + i)); |
| } |
| |
| /* |
| * Since the framebuffer in slot 0x9 uses a separate IRQ, wire the unused |
| * IRQ via GLUE for use by SONIC Ethernet in classic mode |
| */ |
| qdev_connect_gpio_out(glue, GLUE_IRQ_NUBUS_9, |
| qdev_get_gpio_in_named(via2_dev, "nubus-irq", |
| VIA2_NUBUS_IRQ_9)); |
| |
| nubus = &NUBUS_BRIDGE(dev)->bus; |
| |
| /* framebuffer in nubus slot #9 */ |
| |
| dev = qdev_new(TYPE_NUBUS_MACFB); |
| qdev_prop_set_uint32(dev, "slot", 9); |
| qdev_prop_set_uint32(dev, "width", graphic_width); |
| qdev_prop_set_uint32(dev, "height", graphic_height); |
| qdev_prop_set_uint8(dev, "depth", graphic_depth); |
| if (graphic_width == 1152 && graphic_height == 870) { |
| qdev_prop_set_uint8(dev, "display", MACFB_DISPLAY_APPLE_21_COLOR); |
| } else { |
| qdev_prop_set_uint8(dev, "display", MACFB_DISPLAY_VGA); |
| } |
| qdev_realize_and_unref(dev, BUS(nubus), &error_fatal); |
| |
| macfb_mode = (NUBUS_MACFB(dev)->macfb).mode; |
| |
| cs = CPU(cpu); |
| if (linux_boot) { |
| uint64_t high; |
| void *param_blob, *param_ptr, *param_rng_seed; |
| |
| if (kernel_cmdline) { |
| param_blob = g_malloc(strlen(kernel_cmdline) + 1024); |
| } else { |
| param_blob = g_malloc(1024); |
| } |
| |
| kernel_size = load_elf(kernel_filename, NULL, NULL, NULL, |
| &elf_entry, NULL, &high, NULL, 1, |
| EM_68K, 0, 0); |
| if (kernel_size < 0) { |
| error_report("could not load kernel '%s'", kernel_filename); |
| exit(1); |
| } |
| stl_phys(cs->as, 4, elf_entry); /* reset initial PC */ |
| parameters_base = (high + 1) & ~1; |
| param_ptr = param_blob; |
| |
| BOOTINFO1(param_ptr, BI_MACHTYPE, MACH_MAC); |
| BOOTINFO1(param_ptr, BI_FPUTYPE, FPU_68040); |
| BOOTINFO1(param_ptr, BI_MMUTYPE, MMU_68040); |
| BOOTINFO1(param_ptr, BI_CPUTYPE, CPU_68040); |
| BOOTINFO1(param_ptr, BI_MAC_CPUID, CPUB_68040); |
| BOOTINFO1(param_ptr, BI_MAC_MODEL, MAC_MODEL_Q800); |
| BOOTINFO1(param_ptr, |
| BI_MAC_MEMSIZE, ram_size >> 20); /* in MB */ |
| BOOTINFO2(param_ptr, BI_MEMCHUNK, 0, ram_size); |
| BOOTINFO1(param_ptr, BI_MAC_VADDR, |
| VIDEO_BASE + macfb_mode->offset); |
| BOOTINFO1(param_ptr, BI_MAC_VDEPTH, graphic_depth); |
| BOOTINFO1(param_ptr, BI_MAC_VDIM, |
| (graphic_height << 16) | graphic_width); |
| BOOTINFO1(param_ptr, BI_MAC_VROW, macfb_mode->stride); |
| BOOTINFO1(param_ptr, BI_MAC_SCCBASE, SCC_BASE); |
| |
| rom = g_malloc(sizeof(*rom)); |
| memory_region_init_ram_ptr(rom, NULL, "m68k_fake_mac.rom", |
| sizeof(fake_mac_rom), fake_mac_rom); |
| memory_region_set_readonly(rom, true); |
| memory_region_add_subregion(get_system_memory(), MACROM_ADDR, rom); |
| |
| if (kernel_cmdline) { |
| BOOTINFOSTR(param_ptr, BI_COMMAND_LINE, |
| kernel_cmdline); |
| } |
| |
| /* Pass seed to RNG. */ |
| param_rng_seed = param_ptr; |
| qemu_guest_getrandom_nofail(rng_seed, sizeof(rng_seed)); |
| BOOTINFODATA(param_ptr, BI_RNG_SEED, |
| rng_seed, sizeof(rng_seed)); |
| |
| /* load initrd */ |
| if (initrd_filename) { |
| initrd_size = get_image_size(initrd_filename); |
| if (initrd_size < 0) { |
| error_report("could not load initial ram disk '%s'", |
| initrd_filename); |
| exit(1); |
| } |
| |
| initrd_base = (ram_size - initrd_size) & TARGET_PAGE_MASK; |
| load_image_targphys(initrd_filename, initrd_base, |
| ram_size - initrd_base); |
| BOOTINFO2(param_ptr, BI_RAMDISK, initrd_base, |
| initrd_size); |
| } else { |
| initrd_base = 0; |
| initrd_size = 0; |
| } |
| BOOTINFO0(param_ptr, BI_LAST); |
| rom_add_blob_fixed_as("bootinfo", param_blob, param_ptr - param_blob, |
| parameters_base, cs->as); |
| qemu_register_reset_nosnapshotload(rerandomize_rng_seed, |
| rom_ptr_for_as(cs->as, parameters_base, |
| param_ptr - param_blob) + |
| (param_rng_seed - param_blob)); |
| g_free(param_blob); |
| } else { |
| uint8_t *ptr; |
| /* allocate and load BIOS */ |
| rom = g_malloc(sizeof(*rom)); |
| memory_region_init_rom(rom, NULL, "m68k_mac.rom", MACROM_SIZE, |
| &error_abort); |
| filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); |
| memory_region_add_subregion(get_system_memory(), MACROM_ADDR, rom); |
| |
| /* Load MacROM binary */ |
| if (filename) { |
| bios_size = load_image_targphys(filename, MACROM_ADDR, MACROM_SIZE); |
| g_free(filename); |
| } else { |
| bios_size = -1; |
| } |
| |
| /* Remove qtest_enabled() check once firmware files are in the tree */ |
| if (!qtest_enabled()) { |
| if (bios_size <= 0 || bios_size > MACROM_SIZE) { |
| error_report("could not load MacROM '%s'", bios_name); |
| exit(1); |
| } |
| |
| ptr = rom_ptr(MACROM_ADDR, bios_size); |
| assert(ptr != NULL); |
| stl_phys(cs->as, 0, ldl_p(ptr)); /* reset initial SP */ |
| stl_phys(cs->as, 4, |
| MACROM_ADDR + ldl_p(ptr + 4)); /* reset initial PC */ |
| } |
| } |
| } |
| |
| static GlobalProperty hw_compat_q800[] = { |
| { "scsi-hd", "quirk_mode_page_vendor_specific_apple", "on"}, |
| { "scsi-hd", "vendor", " SEAGATE" }, |
| { "scsi-hd", "product", " ST225N" }, |
| { "scsi-hd", "ver", "1.0 " }, |
| { "scsi-cd", "quirk_mode_page_apple_vendor", "on"}, |
| { "scsi-cd", "quirk_mode_sense_rom_use_dbd", "on"}, |
| { "scsi-cd", "quirk_mode_page_vendor_specific_apple", "on"}, |
| { "scsi-cd", "quirk_mode_page_truncated", "on"}, |
| { "scsi-cd", "vendor", "MATSHITA" }, |
| { "scsi-cd", "product", "CD-ROM CR-8005" }, |
| { "scsi-cd", "ver", "1.0k" }, |
| }; |
| static const size_t hw_compat_q800_len = G_N_ELEMENTS(hw_compat_q800); |
| |
| static void q800_machine_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| mc->desc = "Macintosh Quadra 800"; |
| mc->init = q800_init; |
| mc->default_cpu_type = M68K_CPU_TYPE_NAME("m68040"); |
| mc->max_cpus = 1; |
| mc->block_default_type = IF_SCSI; |
| mc->default_ram_id = "m68k_mac.ram"; |
| compat_props_add(mc->compat_props, hw_compat_q800, hw_compat_q800_len); |
| } |
| |
| static const TypeInfo q800_machine_typeinfo = { |
| .name = MACHINE_TYPE_NAME("q800"), |
| .parent = TYPE_MACHINE, |
| .class_init = q800_machine_class_init, |
| }; |
| |
| static void q800_machine_register_types(void) |
| { |
| type_register_static(&q800_machine_typeinfo); |
| type_register_static(&glue_info); |
| } |
| |
| type_init(q800_machine_register_types) |
