| /* |
| * ARM generic helpers. |
| * |
| * This code is licensed under the GNU GPL v2 or later. |
| * |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "cpu.h" |
| #include "internals.h" |
| #include "gdbstub/helpers.h" |
| #include "exec/helper-proto.h" |
| #include "qemu/main-loop.h" |
| #include "qemu/bitops.h" |
| #include "qemu/log.h" |
| #include "exec/exec-all.h" |
| #ifdef CONFIG_TCG |
| #include "exec/cpu_ldst.h" |
| #include "semihosting/common-semi.h" |
| #endif |
| #if !defined(CONFIG_USER_ONLY) |
| #include "hw/intc/armv7m_nvic.h" |
| #endif |
| |
| static void v7m_msr_xpsr(CPUARMState *env, uint32_t mask, |
| uint32_t reg, uint32_t val) |
| { |
| /* Only APSR is actually writable */ |
| if (!(reg & 4)) { |
| uint32_t apsrmask = 0; |
| |
| if (mask & 8) { |
| apsrmask |= XPSR_NZCV | XPSR_Q; |
| } |
| if ((mask & 4) && arm_feature(env, ARM_FEATURE_THUMB_DSP)) { |
| apsrmask |= XPSR_GE; |
| } |
| xpsr_write(env, val, apsrmask); |
| } |
| } |
| |
| static uint32_t v7m_mrs_xpsr(CPUARMState *env, uint32_t reg, unsigned el) |
| { |
| uint32_t mask = 0; |
| |
| if ((reg & 1) && el) { |
| mask |= XPSR_EXCP; /* IPSR (unpriv. reads as zero) */ |
| } |
| if (!(reg & 4)) { |
| mask |= XPSR_NZCV | XPSR_Q; /* APSR */ |
| if (arm_feature(env, ARM_FEATURE_THUMB_DSP)) { |
| mask |= XPSR_GE; |
| } |
| } |
| /* EPSR reads as zero */ |
| return xpsr_read(env) & mask; |
| } |
| |
| uint32_t arm_v7m_mrs_control(CPUARMState *env, uint32_t secure) |
| { |
| uint32_t value = env->v7m.control[secure]; |
| |
| if (!secure) { |
| /* SFPA is RAZ/WI from NS; FPCA is stored in the M_REG_S bank */ |
| value |= env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK; |
| } |
| return value; |
| } |
| |
| #ifdef CONFIG_USER_ONLY |
| |
| void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) |
| { |
| uint32_t mask = extract32(maskreg, 8, 4); |
| uint32_t reg = extract32(maskreg, 0, 8); |
| |
| switch (reg) { |
| case 0 ... 7: /* xPSR sub-fields */ |
| v7m_msr_xpsr(env, mask, reg, val); |
| break; |
| case 20: /* CONTROL */ |
| /* There are no sub-fields that are actually writable from EL0. */ |
| break; |
| default: |
| /* Unprivileged writes to other registers are ignored */ |
| break; |
| } |
| } |
| |
| uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) |
| { |
| switch (reg) { |
| case 0 ... 7: /* xPSR sub-fields */ |
| return v7m_mrs_xpsr(env, reg, 0); |
| case 20: /* CONTROL */ |
| return arm_v7m_mrs_control(env, 0); |
| default: |
| /* Unprivileged reads others as zero. */ |
| return 0; |
| } |
| } |
| |
| void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) |
| { |
| /* translate.c should never generate calls here in user-only mode */ |
| g_assert_not_reached(); |
| } |
| |
| void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) |
| { |
| /* translate.c should never generate calls here in user-only mode */ |
| g_assert_not_reached(); |
| } |
| |
| void HELPER(v7m_preserve_fp_state)(CPUARMState *env) |
| { |
| /* translate.c should never generate calls here in user-only mode */ |
| g_assert_not_reached(); |
| } |
| |
| void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) |
| { |
| /* translate.c should never generate calls here in user-only mode */ |
| g_assert_not_reached(); |
| } |
| |
| void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) |
| { |
| /* translate.c should never generate calls here in user-only mode */ |
| g_assert_not_reached(); |
| } |
| |
| uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) |
| { |
| /* |
| * The TT instructions can be used by unprivileged code, but in |
| * user-only emulation we don't have the MPU. |
| * Luckily since we know we are NonSecure unprivileged (and that in |
| * turn means that the A flag wasn't specified), all the bits in the |
| * register must be zero: |
| * IREGION: 0 because IRVALID is 0 |
| * IRVALID: 0 because NS |
| * S: 0 because NS |
| * NSRW: 0 because NS |
| * NSR: 0 because NS |
| * RW: 0 because unpriv and A flag not set |
| * R: 0 because unpriv and A flag not set |
| * SRVALID: 0 because NS |
| * MRVALID: 0 because unpriv and A flag not set |
| * SREGION: 0 because SRVALID is 0 |
| * MREGION: 0 because MRVALID is 0 |
| */ |
| return 0; |
| } |
| |
| ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) |
| { |
| return ARMMMUIdx_MUser; |
| } |
| |
| #else /* !CONFIG_USER_ONLY */ |
| |
| static ARMMMUIdx arm_v7m_mmu_idx_all(CPUARMState *env, |
| bool secstate, bool priv, bool negpri) |
| { |
| ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; |
| |
| if (priv) { |
| mmu_idx |= ARM_MMU_IDX_M_PRIV; |
| } |
| |
| if (negpri) { |
| mmu_idx |= ARM_MMU_IDX_M_NEGPRI; |
| } |
| |
| if (secstate) { |
| mmu_idx |= ARM_MMU_IDX_M_S; |
| } |
| |
| return mmu_idx; |
| } |
| |
| static ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, |
| bool secstate, bool priv) |
| { |
| bool negpri = armv7m_nvic_neg_prio_requested(env->nvic, secstate); |
| |
| return arm_v7m_mmu_idx_all(env, secstate, priv, negpri); |
| } |
| |
| /* Return the MMU index for a v7M CPU in the specified security state */ |
| ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) |
| { |
| bool priv = arm_v7m_is_handler_mode(env) || |
| !(env->v7m.control[secstate] & 1); |
| |
| return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); |
| } |
| |
| /* |
| * What kind of stack write are we doing? This affects how exceptions |
| * generated during the stacking are treated. |
| */ |
| typedef enum StackingMode { |
| STACK_NORMAL, |
| STACK_IGNFAULTS, |
| STACK_LAZYFP, |
| } StackingMode; |
| |
| static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, |
| ARMMMUIdx mmu_idx, StackingMode mode) |
| { |
| CPUState *cs = CPU(cpu); |
| CPUARMState *env = &cpu->env; |
| MemTxResult txres; |
| GetPhysAddrResult res = {}; |
| ARMMMUFaultInfo fi = {}; |
| bool secure = mmu_idx & ARM_MMU_IDX_M_S; |
| int exc; |
| bool exc_secure; |
| |
| if (get_phys_addr(env, addr, MMU_DATA_STORE, mmu_idx, &res, &fi)) { |
| /* MPU/SAU lookup failed */ |
| if (fi.type == ARMFault_QEMU_SFault) { |
| if (mode == STACK_LAZYFP) { |
| qemu_log_mask(CPU_LOG_INT, |
| "...SecureFault with SFSR.LSPERR " |
| "during lazy stacking\n"); |
| env->v7m.sfsr |= R_V7M_SFSR_LSPERR_MASK; |
| } else { |
| qemu_log_mask(CPU_LOG_INT, |
| "...SecureFault with SFSR.AUVIOL " |
| "during stacking\n"); |
| env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK; |
| } |
| env->v7m.sfsr |= R_V7M_SFSR_SFARVALID_MASK; |
| env->v7m.sfar = addr; |
| exc = ARMV7M_EXCP_SECURE; |
| exc_secure = false; |
| } else { |
| if (mode == STACK_LAZYFP) { |
| qemu_log_mask(CPU_LOG_INT, |
| "...MemManageFault with CFSR.MLSPERR\n"); |
| env->v7m.cfsr[secure] |= R_V7M_CFSR_MLSPERR_MASK; |
| } else { |
| qemu_log_mask(CPU_LOG_INT, |
| "...MemManageFault with CFSR.MSTKERR\n"); |
| env->v7m.cfsr[secure] |= R_V7M_CFSR_MSTKERR_MASK; |
| } |
| exc = ARMV7M_EXCP_MEM; |
| exc_secure = secure; |
| } |
| goto pend_fault; |
| } |
| address_space_stl_le(arm_addressspace(cs, res.f.attrs), res.f.phys_addr, |
| value, res.f.attrs, &txres); |
| if (txres != MEMTX_OK) { |
| /* BusFault trying to write the data */ |
| if (mode == STACK_LAZYFP) { |
| qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.LSPERR\n"); |
| env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_LSPERR_MASK; |
| } else { |
| qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.STKERR\n"); |
| env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_STKERR_MASK; |
| } |
| exc = ARMV7M_EXCP_BUS; |
| exc_secure = false; |
| goto pend_fault; |
| } |
| return true; |
| |
| pend_fault: |
| /* |
| * By pending the exception at this point we are making |
| * the IMPDEF choice "overridden exceptions pended" (see the |
| * MergeExcInfo() pseudocode). The other choice would be to not |
| * pend them now and then make a choice about which to throw away |
| * later if we have two derived exceptions. |
| * The only case when we must not pend the exception but instead |
| * throw it away is if we are doing the push of the callee registers |
| * and we've already generated a derived exception (this is indicated |
| * by the caller passing STACK_IGNFAULTS). Even in this case we will |
| * still update the fault status registers. |
| */ |
| switch (mode) { |
| case STACK_NORMAL: |
| armv7m_nvic_set_pending_derived(env->nvic, exc, exc_secure); |
| break; |
| case STACK_LAZYFP: |
| armv7m_nvic_set_pending_lazyfp(env->nvic, exc, exc_secure); |
| break; |
| case STACK_IGNFAULTS: |
| break; |
| } |
| return false; |
| } |
| |
| static bool v7m_stack_read(ARMCPU *cpu, uint32_t *dest, uint32_t addr, |
| ARMMMUIdx mmu_idx) |
| { |
| CPUState *cs = CPU(cpu); |
| CPUARMState *env = &cpu->env; |
| MemTxResult txres; |
| GetPhysAddrResult res = {}; |
| ARMMMUFaultInfo fi = {}; |
| bool secure = mmu_idx & ARM_MMU_IDX_M_S; |
| int exc; |
| bool exc_secure; |
| uint32_t value; |
| |
| if (get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &res, &fi)) { |
| /* MPU/SAU lookup failed */ |
| if (fi.type == ARMFault_QEMU_SFault) { |
| qemu_log_mask(CPU_LOG_INT, |
| "...SecureFault with SFSR.AUVIOL during unstack\n"); |
| env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; |
| env->v7m.sfar = addr; |
| exc = ARMV7M_EXCP_SECURE; |
| exc_secure = false; |
| } else { |
| qemu_log_mask(CPU_LOG_INT, |
| "...MemManageFault with CFSR.MUNSTKERR\n"); |
| env->v7m.cfsr[secure] |= R_V7M_CFSR_MUNSTKERR_MASK; |
| exc = ARMV7M_EXCP_MEM; |
| exc_secure = secure; |
| } |
| goto pend_fault; |
| } |
| |
| value = address_space_ldl(arm_addressspace(cs, res.f.attrs), |
| res.f.phys_addr, res.f.attrs, &txres); |
| if (txres != MEMTX_OK) { |
| /* BusFault trying to read the data */ |
| qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.UNSTKERR\n"); |
| env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_UNSTKERR_MASK; |
| exc = ARMV7M_EXCP_BUS; |
| exc_secure = false; |
| goto pend_fault; |
| } |
| |
| *dest = value; |
| return true; |
| |
| pend_fault: |
| /* |
| * By pending the exception at this point we are making |
| * the IMPDEF choice "overridden exceptions pended" (see the |
| * MergeExcInfo() pseudocode). The other choice would be to not |
| * pend them now and then make a choice about which to throw away |
| * later if we have two derived exceptions. |
| */ |
| armv7m_nvic_set_pending(env->nvic, exc, exc_secure); |
| return false; |
| } |
| |
| void HELPER(v7m_preserve_fp_state)(CPUARMState *env) |
| { |
| /* |
| * Preserve FP state (because LSPACT was set and we are about |
| * to execute an FP instruction). This corresponds to the |
| * PreserveFPState() pseudocode. |
| * We may throw an exception if the stacking fails. |
| */ |
| ARMCPU *cpu = env_archcpu(env); |
| bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; |
| bool negpri = !(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_HFRDY_MASK); |
| bool is_priv = !(env->v7m.fpccr[is_secure] & R_V7M_FPCCR_USER_MASK); |
| bool splimviol = env->v7m.fpccr[is_secure] & R_V7M_FPCCR_SPLIMVIOL_MASK; |
| uint32_t fpcar = env->v7m.fpcar[is_secure]; |
| bool stacked_ok = true; |
| bool ts = is_secure && (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); |
| bool take_exception; |
| |
| /* Take the iothread lock as we are going to touch the NVIC */ |
| qemu_mutex_lock_iothread(); |
| |
| /* Check the background context had access to the FPU */ |
| if (!v7m_cpacr_pass(env, is_secure, is_priv)) { |
| armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, is_secure); |
| env->v7m.cfsr[is_secure] |= R_V7M_CFSR_NOCP_MASK; |
| stacked_ok = false; |
| } else if (!is_secure && !extract32(env->v7m.nsacr, 10, 1)) { |
| armv7m_nvic_set_pending_lazyfp(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); |
| env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; |
| stacked_ok = false; |
| } |
| |
| if (!splimviol && stacked_ok) { |
| /* We only stack if the stack limit wasn't violated */ |
| int i; |
| ARMMMUIdx mmu_idx; |
| |
| mmu_idx = arm_v7m_mmu_idx_all(env, is_secure, is_priv, negpri); |
| for (i = 0; i < (ts ? 32 : 16); i += 2) { |
| uint64_t dn = *aa32_vfp_dreg(env, i / 2); |
| uint32_t faddr = fpcar + 4 * i; |
| uint32_t slo = extract64(dn, 0, 32); |
| uint32_t shi = extract64(dn, 32, 32); |
| |
| if (i >= 16) { |
| faddr += 8; /* skip the slot for the FPSCR/VPR */ |
| } |
| stacked_ok = stacked_ok && |
| v7m_stack_write(cpu, faddr, slo, mmu_idx, STACK_LAZYFP) && |
| v7m_stack_write(cpu, faddr + 4, shi, mmu_idx, STACK_LAZYFP); |
| } |
| |
| stacked_ok = stacked_ok && |
| v7m_stack_write(cpu, fpcar + 0x40, |
| vfp_get_fpscr(env), mmu_idx, STACK_LAZYFP); |
| if (cpu_isar_feature(aa32_mve, cpu)) { |
| stacked_ok = stacked_ok && |
| v7m_stack_write(cpu, fpcar + 0x44, |
| env->v7m.vpr, mmu_idx, STACK_LAZYFP); |
| } |
| } |
| |
| /* |
| * We definitely pended an exception, but it's possible that it |
| * might not be able to be taken now. If its priority permits us |
| * to take it now, then we must not update the LSPACT or FP regs, |
| * but instead jump out to take the exception immediately. |
| * If it's just pending and won't be taken until the current |
| * handler exits, then we do update LSPACT and the FP regs. |
| */ |
| take_exception = !stacked_ok && |
| armv7m_nvic_can_take_pending_exception(env->nvic); |
| |
| qemu_mutex_unlock_iothread(); |
| |
| if (take_exception) { |
| raise_exception_ra(env, EXCP_LAZYFP, 0, 1, GETPC()); |
| } |
| |
| env->v7m.fpccr[is_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; |
| |
| if (ts) { |
| /* Clear s0 to s31 and the FPSCR and VPR */ |
| int i; |
| |
| for (i = 0; i < 32; i += 2) { |
| *aa32_vfp_dreg(env, i / 2) = 0; |
| } |
| vfp_set_fpscr(env, 0); |
| if (cpu_isar_feature(aa32_mve, cpu)) { |
| env->v7m.vpr = 0; |
| } |
| } |
| /* |
| * Otherwise s0 to s15, FPSCR and VPR are UNKNOWN; we choose to leave them |
| * unchanged. |
| */ |
| } |
| |
| /* |
| * Write to v7M CONTROL.SPSEL bit for the specified security bank. |
| * This may change the current stack pointer between Main and Process |
| * stack pointers if it is done for the CONTROL register for the current |
| * security state. |
| */ |
| static void write_v7m_control_spsel_for_secstate(CPUARMState *env, |
| bool new_spsel, |
| bool secstate) |
| { |
| bool old_is_psp = v7m_using_psp(env); |
| |
| env->v7m.control[secstate] = |
| deposit32(env->v7m.control[secstate], |
| R_V7M_CONTROL_SPSEL_SHIFT, |
| R_V7M_CONTROL_SPSEL_LENGTH, new_spsel); |
| |
| if (secstate == env->v7m.secure) { |
| bool new_is_psp = v7m_using_psp(env); |
| uint32_t tmp; |
| |
| if (old_is_psp != new_is_psp) { |
| tmp = env->v7m.other_sp; |
| env->v7m.other_sp = env->regs[13]; |
| env->regs[13] = tmp; |
| } |
| } |
| } |
| |
| /* |
| * Write to v7M CONTROL.SPSEL bit. This may change the current |
| * stack pointer between Main and Process stack pointers. |
| */ |
| static void write_v7m_control_spsel(CPUARMState *env, bool new_spsel) |
| { |
| write_v7m_control_spsel_for_secstate(env, new_spsel, env->v7m.secure); |
| } |
| |
| void write_v7m_exception(CPUARMState *env, uint32_t new_exc) |
| { |
| /* |
| * Write a new value to v7m.exception, thus transitioning into or out |
| * of Handler mode; this may result in a change of active stack pointer. |
| */ |
| bool new_is_psp, old_is_psp = v7m_using_psp(env); |
| uint32_t tmp; |
| |
| env->v7m.exception = new_exc; |
| |
| new_is_psp = v7m_using_psp(env); |
| |
| if (old_is_psp != new_is_psp) { |
| tmp = env->v7m.other_sp; |
| env->v7m.other_sp = env->regs[13]; |
| env->regs[13] = tmp; |
| } |
| } |
| |
| /* Switch M profile security state between NS and S */ |
| static void switch_v7m_security_state(CPUARMState *env, bool new_secstate) |
| { |
| uint32_t new_ss_msp, new_ss_psp; |
| |
| if (env->v7m.secure == new_secstate) { |
| return; |
| } |
| |
| /* |
| * All the banked state is accessed by looking at env->v7m.secure |
| * except for the stack pointer; rearrange the SP appropriately. |
| */ |
| new_ss_msp = env->v7m.other_ss_msp; |
| new_ss_psp = env->v7m.other_ss_psp; |
| |
| if (v7m_using_psp(env)) { |
| env->v7m.other_ss_psp = env->regs[13]; |
| env->v7m.other_ss_msp = env->v7m.other_sp; |
| } else { |
| env->v7m.other_ss_msp = env->regs[13]; |
| env->v7m.other_ss_psp = env->v7m.other_sp; |
| } |
| |
| env->v7m.secure = new_secstate; |
| |
| if (v7m_using_psp(env)) { |
| env->regs[13] = new_ss_psp; |
| env->v7m.other_sp = new_ss_msp; |
| } else { |
| env->regs[13] = new_ss_msp; |
| env->v7m.other_sp = new_ss_psp; |
| } |
| } |
| |
| void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) |
| { |
| /* |
| * Handle v7M BXNS: |
| * - if the return value is a magic value, do exception return (like BX) |
| * - otherwise bit 0 of the return value is the target security state |
| */ |
| uint32_t min_magic; |
| |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| /* Covers FNC_RETURN and EXC_RETURN magic */ |
| min_magic = FNC_RETURN_MIN_MAGIC; |
| } else { |
| /* EXC_RETURN magic only */ |
| min_magic = EXC_RETURN_MIN_MAGIC; |
| } |
| |
| if (dest >= min_magic) { |
| /* |
| * This is an exception return magic value; put it where |
| * do_v7m_exception_exit() expects and raise EXCEPTION_EXIT. |
| * Note that if we ever add gen_ss_advance() singlestep support to |
| * M profile this should count as an "instruction execution complete" |
| * event (compare gen_bx_excret_final_code()). |
| */ |
| env->regs[15] = dest & ~1; |
| env->thumb = dest & 1; |
| HELPER(exception_internal)(env, EXCP_EXCEPTION_EXIT); |
| /* notreached */ |
| } |
| |
| /* translate.c should have made BXNS UNDEF unless we're secure */ |
| assert(env->v7m.secure); |
| |
| if (!(dest & 1)) { |
| env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; |
| } |
| switch_v7m_security_state(env, dest & 1); |
| env->thumb = true; |
| env->regs[15] = dest & ~1; |
| arm_rebuild_hflags(env); |
| } |
| |
| void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) |
| { |
| /* |
| * Handle v7M BLXNS: |
| * - bit 0 of the destination address is the target security state |
| */ |
| |
| /* At this point regs[15] is the address just after the BLXNS */ |
| uint32_t nextinst = env->regs[15] | 1; |
| uint32_t sp = env->regs[13] - 8; |
| uint32_t saved_psr; |
| |
| /* translate.c will have made BLXNS UNDEF unless we're secure */ |
| assert(env->v7m.secure); |
| |
| if (dest & 1) { |
| /* |
| * Target is Secure, so this is just a normal BLX, |
| * except that the low bit doesn't indicate Thumb/not. |
| */ |
| env->regs[14] = nextinst; |
| env->thumb = true; |
| env->regs[15] = dest & ~1; |
| return; |
| } |
| |
| /* Target is non-secure: first push a stack frame */ |
| if (!QEMU_IS_ALIGNED(sp, 8)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "BLXNS with misaligned SP is UNPREDICTABLE\n"); |
| } |
| |
| if (sp < v7m_sp_limit(env)) { |
| raise_exception(env, EXCP_STKOF, 0, 1); |
| } |
| |
| saved_psr = env->v7m.exception; |
| if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK) { |
| saved_psr |= XPSR_SFPA; |
| } |
| |
| /* Note that these stores can throw exceptions on MPU faults */ |
| cpu_stl_data_ra(env, sp, nextinst, GETPC()); |
| cpu_stl_data_ra(env, sp + 4, saved_psr, GETPC()); |
| |
| env->regs[13] = sp; |
| env->regs[14] = 0xfeffffff; |
| if (arm_v7m_is_handler_mode(env)) { |
| /* |
| * Write a dummy value to IPSR, to avoid leaking the current secure |
| * exception number to non-secure code. This is guaranteed not |
| * to cause write_v7m_exception() to actually change stacks. |
| */ |
| write_v7m_exception(env, 1); |
| } |
| env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; |
| switch_v7m_security_state(env, 0); |
| env->thumb = true; |
| env->regs[15] = dest; |
| arm_rebuild_hflags(env); |
| } |
| |
| static bool arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure, |
| uint32_t *pvec) |
| { |
| CPUState *cs = CPU(cpu); |
| CPUARMState *env = &cpu->env; |
| MemTxResult result; |
| uint32_t addr = env->v7m.vecbase[targets_secure] + exc * 4; |
| uint32_t vector_entry; |
| MemTxAttrs attrs = {}; |
| ARMMMUIdx mmu_idx; |
| bool exc_secure; |
| |
| qemu_log_mask(CPU_LOG_INT, |
| "...loading from element %d of %s vector table at 0x%x\n", |
| exc, targets_secure ? "secure" : "non-secure", addr); |
| |
| mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, targets_secure, true); |
| |
| /* |
| * We don't do a get_phys_addr() here because the rules for vector |
| * loads are special: they always use the default memory map, and |
| * the default memory map permits reads from all addresses. |
| * Since there's no easy way to pass through to pmsav8_mpu_lookup() |
| * that we want this special case which would always say "yes", |
| * we just do the SAU lookup here followed by a direct physical load. |
| */ |
| attrs.secure = targets_secure; |
| attrs.user = false; |
| |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| V8M_SAttributes sattrs = {}; |
| |
| v8m_security_lookup(env, addr, MMU_DATA_LOAD, mmu_idx, |
| targets_secure, &sattrs); |
| if (sattrs.ns) { |
| attrs.secure = false; |
| } else if (!targets_secure) { |
| /* |
| * NS access to S memory: the underlying exception which we escalate |
| * to HardFault is SecureFault, which always targets Secure. |
| */ |
| exc_secure = true; |
| goto load_fail; |
| } |
| } |
| |
| vector_entry = address_space_ldl(arm_addressspace(cs, attrs), addr, |
| attrs, &result); |
| if (result != MEMTX_OK) { |
| /* |
| * Underlying exception is BusFault: its target security state |
| * depends on BFHFNMINS. |
| */ |
| exc_secure = !(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK); |
| goto load_fail; |
| } |
| *pvec = vector_entry; |
| qemu_log_mask(CPU_LOG_INT, "...loaded new PC 0x%x\n", *pvec); |
| return true; |
| |
| load_fail: |
| /* |
| * All vector table fetch fails are reported as HardFault, with |
| * HFSR.VECTTBL and .FORCED set. (FORCED is set because |
| * technically the underlying exception is a SecureFault or BusFault |
| * that is escalated to HardFault.) This is a terminal exception, |
| * so we will either take the HardFault immediately or else enter |
| * lockup (the latter case is handled in armv7m_nvic_set_pending_derived()). |
| * The HardFault is Secure if BFHFNMINS is 0 (meaning that all HFs are |
| * secure); otherwise it targets the same security state as the |
| * underlying exception. |
| * In v8.1M HardFaults from vector table fetch fails don't set FORCED. |
| */ |
| if (!(cpu->env.v7m.aircr & R_V7M_AIRCR_BFHFNMINS_MASK)) { |
| exc_secure = true; |
| } |
| env->v7m.hfsr |= R_V7M_HFSR_VECTTBL_MASK; |
| if (!arm_feature(env, ARM_FEATURE_V8_1M)) { |
| env->v7m.hfsr |= R_V7M_HFSR_FORCED_MASK; |
| } |
| armv7m_nvic_set_pending_derived(env->nvic, ARMV7M_EXCP_HARD, exc_secure); |
| return false; |
| } |
| |
| static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr) |
| { |
| /* |
| * Return the integrity signature value for the callee-saves |
| * stack frame section. @lr is the exception return payload/LR value |
| * whose FType bit forms bit 0 of the signature if FP is present. |
| */ |
| uint32_t sig = 0xfefa125a; |
| |
| if (!cpu_isar_feature(aa32_vfp_simd, env_archcpu(env)) |
| || (lr & R_V7M_EXCRET_FTYPE_MASK)) { |
| sig |= 1; |
| } |
| return sig; |
| } |
| |
| static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, |
| bool ignore_faults) |
| { |
| /* |
| * For v8M, push the callee-saves register part of the stack frame. |
| * Compare the v8M pseudocode PushCalleeStack(). |
| * In the tailchaining case this may not be the current stack. |
| */ |
| CPUARMState *env = &cpu->env; |
| uint32_t *frame_sp_p; |
| uint32_t frameptr; |
| ARMMMUIdx mmu_idx; |
| bool stacked_ok; |
| uint32_t limit; |
| bool want_psp; |
| uint32_t sig; |
| StackingMode smode = ignore_faults ? STACK_IGNFAULTS : STACK_NORMAL; |
| |
| if (dotailchain) { |
| bool mode = lr & R_V7M_EXCRET_MODE_MASK; |
| bool priv = !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_NPRIV_MASK) || |
| !mode; |
| |
| mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, M_REG_S, priv); |
| frame_sp_p = arm_v7m_get_sp_ptr(env, M_REG_S, mode, |
| lr & R_V7M_EXCRET_SPSEL_MASK); |
| want_psp = mode && (lr & R_V7M_EXCRET_SPSEL_MASK); |
| if (want_psp) { |
| limit = env->v7m.psplim[M_REG_S]; |
| } else { |
| limit = env->v7m.msplim[M_REG_S]; |
| } |
| } else { |
| mmu_idx = arm_mmu_idx(env); |
| frame_sp_p = &env->regs[13]; |
| limit = v7m_sp_limit(env); |
| } |
| |
| frameptr = *frame_sp_p - 0x28; |
| if (frameptr < limit) { |
| /* |
| * Stack limit failure: set SP to the limit value, and generate |
| * STKOF UsageFault. Stack pushes below the limit must not be |
| * performed. It is IMPDEF whether pushes above the limit are |
| * performed; we choose not to. |
| */ |
| qemu_log_mask(CPU_LOG_INT, |
| "...STKOF during callee-saves register stacking\n"); |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_STKOF_MASK; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, |
| env->v7m.secure); |
| *frame_sp_p = limit; |
| return true; |
| } |
| |
| /* |
| * Write as much of the stack frame as we can. A write failure may |
| * cause us to pend a derived exception. |
| */ |
| sig = v7m_integrity_sig(env, lr); |
| stacked_ok = |
| v7m_stack_write(cpu, frameptr, sig, mmu_idx, smode) && |
| v7m_stack_write(cpu, frameptr + 0x8, env->regs[4], mmu_idx, smode) && |
| v7m_stack_write(cpu, frameptr + 0xc, env->regs[5], mmu_idx, smode) && |
| v7m_stack_write(cpu, frameptr + 0x10, env->regs[6], mmu_idx, smode) && |
| v7m_stack_write(cpu, frameptr + 0x14, env->regs[7], mmu_idx, smode) && |
| v7m_stack_write(cpu, frameptr + 0x18, env->regs[8], mmu_idx, smode) && |
| v7m_stack_write(cpu, frameptr + 0x1c, env->regs[9], mmu_idx, smode) && |
| v7m_stack_write(cpu, frameptr + 0x20, env->regs[10], mmu_idx, smode) && |
| v7m_stack_write(cpu, frameptr + 0x24, env->regs[11], mmu_idx, smode); |
| |
| /* Update SP regardless of whether any of the stack accesses failed. */ |
| *frame_sp_p = frameptr; |
| |
| return !stacked_ok; |
| } |
| |
| static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, |
| bool ignore_stackfaults) |
| { |
| /* |
| * Do the "take the exception" parts of exception entry, |
| * but not the pushing of state to the stack. This is |
| * similar to the pseudocode ExceptionTaken() function. |
| */ |
| CPUARMState *env = &cpu->env; |
| uint32_t addr; |
| bool targets_secure; |
| int exc; |
| bool push_failed = false; |
| |
| armv7m_nvic_get_pending_irq_info(env->nvic, &exc, &targets_secure); |
| qemu_log_mask(CPU_LOG_INT, "...taking pending %s exception %d\n", |
| targets_secure ? "secure" : "nonsecure", exc); |
| |
| if (dotailchain) { |
| /* Sanitize LR FType and PREFIX bits */ |
| if (!cpu_isar_feature(aa32_vfp_simd, cpu)) { |
| lr |= R_V7M_EXCRET_FTYPE_MASK; |
| } |
| lr = deposit32(lr, 24, 8, 0xff); |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY) && |
| (lr & R_V7M_EXCRET_S_MASK)) { |
| /* |
| * The background code (the owner of the registers in the |
| * exception frame) is Secure. This means it may either already |
| * have or now needs to push callee-saves registers. |
| */ |
| if (targets_secure) { |
| if (dotailchain && !(lr & R_V7M_EXCRET_ES_MASK)) { |
| /* |
| * We took an exception from Secure to NonSecure |
| * (which means the callee-saved registers got stacked) |
| * and are now tailchaining to a Secure exception. |
| * Clear DCRS so eventual return from this Secure |
| * exception unstacks the callee-saved registers. |
| */ |
| lr &= ~R_V7M_EXCRET_DCRS_MASK; |
| } |
| } else { |
| /* |
| * We're going to a non-secure exception; push the |
| * callee-saves registers to the stack now, if they're |
| * not already saved. |
| */ |
| if (lr & R_V7M_EXCRET_DCRS_MASK && |
| !(dotailchain && !(lr & R_V7M_EXCRET_ES_MASK))) { |
| push_failed = v7m_push_callee_stack(cpu, lr, dotailchain, |
| ignore_stackfaults); |
| } |
| lr |= R_V7M_EXCRET_DCRS_MASK; |
| } |
| } |
| |
| lr &= ~R_V7M_EXCRET_ES_MASK; |
| if (targets_secure) { |
| lr |= R_V7M_EXCRET_ES_MASK; |
| } |
| lr &= ~R_V7M_EXCRET_SPSEL_MASK; |
| if (env->v7m.control[targets_secure] & R_V7M_CONTROL_SPSEL_MASK) { |
| lr |= R_V7M_EXCRET_SPSEL_MASK; |
| } |
| |
| /* |
| * Clear registers if necessary to prevent non-secure exception |
| * code being able to see register values from secure code. |
| * Where register values become architecturally UNKNOWN we leave |
| * them with their previous values. v8.1M is tighter than v8.0M |
| * here and always zeroes the caller-saved registers regardless |
| * of the security state the exception is targeting. |
| */ |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| if (!targets_secure || arm_feature(env, ARM_FEATURE_V8_1M)) { |
| /* |
| * Always clear the caller-saved registers (they have been |
| * pushed to the stack earlier in v7m_push_stack()). |
| * Clear callee-saved registers if the background code is |
| * Secure (in which case these regs were saved in |
| * v7m_push_callee_stack()). |
| */ |
| int i; |
| /* |
| * r4..r11 are callee-saves, zero only if background |
| * state was Secure (EXCRET.S == 1) and exception |
| * targets Non-secure state |
| */ |
| bool zero_callee_saves = !targets_secure && |
| (lr & R_V7M_EXCRET_S_MASK); |
| |
| for (i = 0; i < 13; i++) { |
| if (i < 4 || i > 11 || zero_callee_saves) { |
| env->regs[i] = 0; |
| } |
| } |
| /* Clear EAPSR */ |
| xpsr_write(env, 0, XPSR_NZCV | XPSR_Q | XPSR_GE | XPSR_IT); |
| } |
| } |
| } |
| |
| if (push_failed && !ignore_stackfaults) { |
| /* |
| * Derived exception on callee-saves register stacking: |
| * we might now want to take a different exception which |
| * targets a different security state, so try again from the top. |
| */ |
| qemu_log_mask(CPU_LOG_INT, |
| "...derived exception on callee-saves register stacking"); |
| v7m_exception_taken(cpu, lr, true, true); |
| return; |
| } |
| |
| if (!arm_v7m_load_vector(cpu, exc, targets_secure, &addr)) { |
| /* Vector load failed: derived exception */ |
| qemu_log_mask(CPU_LOG_INT, "...derived exception on vector table load"); |
| v7m_exception_taken(cpu, lr, true, true); |
| return; |
| } |
| |
| /* |
| * Now we've done everything that might cause a derived exception |
| * we can go ahead and activate whichever exception we're going to |
| * take (which might now be the derived exception). |
| */ |
| armv7m_nvic_acknowledge_irq(env->nvic); |
| |
| /* Switch to target security state -- must do this before writing SPSEL */ |
| switch_v7m_security_state(env, targets_secure); |
| write_v7m_control_spsel(env, 0); |
| arm_clear_exclusive(env); |
| /* Clear SFPA and FPCA (has no effect if no FPU) */ |
| env->v7m.control[M_REG_S] &= |
| ~(R_V7M_CONTROL_FPCA_MASK | R_V7M_CONTROL_SFPA_MASK); |
| /* Clear IT bits */ |
| env->condexec_bits = 0; |
| env->regs[14] = lr; |
| env->regs[15] = addr & 0xfffffffe; |
| env->thumb = addr & 1; |
| arm_rebuild_hflags(env); |
| } |
| |
| static void v7m_update_fpccr(CPUARMState *env, uint32_t frameptr, |
| bool apply_splim) |
| { |
| /* |
| * Like the pseudocode UpdateFPCCR: save state in FPCAR and FPCCR |
| * that we will need later in order to do lazy FP reg stacking. |
| */ |
| bool is_secure = env->v7m.secure; |
| NVICState *nvic = env->nvic; |
| /* |
| * Some bits are unbanked and live always in fpccr[M_REG_S]; some bits |
| * are banked and we want to update the bit in the bank for the |
| * current security state; and in one case we want to specifically |
| * update the NS banked version of a bit even if we are secure. |
| */ |
| uint32_t *fpccr_s = &env->v7m.fpccr[M_REG_S]; |
| uint32_t *fpccr_ns = &env->v7m.fpccr[M_REG_NS]; |
| uint32_t *fpccr = &env->v7m.fpccr[is_secure]; |
| bool hfrdy, bfrdy, mmrdy, ns_ufrdy, s_ufrdy, sfrdy, monrdy; |
| |
| env->v7m.fpcar[is_secure] = frameptr & ~0x7; |
| |
| if (apply_splim && arm_feature(env, ARM_FEATURE_V8)) { |
| bool splimviol; |
| uint32_t splim = v7m_sp_limit(env); |
| bool ign = armv7m_nvic_neg_prio_requested(nvic, is_secure) && |
| (env->v7m.ccr[is_secure] & R_V7M_CCR_STKOFHFNMIGN_MASK); |
| |
| splimviol = !ign && frameptr < splim; |
| *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, SPLIMVIOL, splimviol); |
| } |
| |
| *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, LSPACT, 1); |
| |
| *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, S, is_secure); |
| |
| *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, USER, arm_current_el(env) == 0); |
| |
| *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, THREAD, |
| !arm_v7m_is_handler_mode(env)); |
| |
| hfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_HARD, false); |
| *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, HFRDY, hfrdy); |
| |
| bfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_BUS, false); |
| *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, BFRDY, bfrdy); |
| |
| mmrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_MEM, is_secure); |
| *fpccr = FIELD_DP32(*fpccr, V7M_FPCCR, MMRDY, mmrdy); |
| |
| ns_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, false); |
| *fpccr_ns = FIELD_DP32(*fpccr_ns, V7M_FPCCR, UFRDY, ns_ufrdy); |
| |
| monrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_DEBUG, false); |
| *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, MONRDY, monrdy); |
| |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| s_ufrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_USAGE, true); |
| *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, UFRDY, s_ufrdy); |
| |
| sfrdy = armv7m_nvic_get_ready_status(nvic, ARMV7M_EXCP_SECURE, false); |
| *fpccr_s = FIELD_DP32(*fpccr_s, V7M_FPCCR, SFRDY, sfrdy); |
| } |
| } |
| |
| void HELPER(v7m_vlstm)(CPUARMState *env, uint32_t fptr) |
| { |
| /* fptr is the value of Rn, the frame pointer we store the FP regs to */ |
| ARMCPU *cpu = env_archcpu(env); |
| bool s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; |
| bool lspact = env->v7m.fpccr[s] & R_V7M_FPCCR_LSPACT_MASK; |
| uintptr_t ra = GETPC(); |
| |
| assert(env->v7m.secure); |
| |
| if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { |
| return; |
| } |
| |
| /* Check access to the coprocessor is permitted */ |
| if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { |
| raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); |
| } |
| |
| if (lspact) { |
| /* LSPACT should not be active when there is active FP state */ |
| raise_exception_ra(env, EXCP_LSERR, 0, 1, GETPC()); |
| } |
| |
| if (fptr & 7) { |
| raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); |
| } |
| |
| /* |
| * Note that we do not use v7m_stack_write() here, because the |
| * accesses should not set the FSR bits for stacking errors if they |
| * fail. (In pseudocode terms, they are AccType_NORMAL, not AccType_STACK |
| * or AccType_LAZYFP). Faults in cpu_stl_data_ra() will throw exceptions |
| * and longjmp out. |
| */ |
| if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { |
| bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; |
| int i; |
| |
| for (i = 0; i < (ts ? 32 : 16); i += 2) { |
| uint64_t dn = *aa32_vfp_dreg(env, i / 2); |
| uint32_t faddr = fptr + 4 * i; |
| uint32_t slo = extract64(dn, 0, 32); |
| uint32_t shi = extract64(dn, 32, 32); |
| |
| if (i >= 16) { |
| faddr += 8; /* skip the slot for the FPSCR */ |
| } |
| cpu_stl_data_ra(env, faddr, slo, ra); |
| cpu_stl_data_ra(env, faddr + 4, shi, ra); |
| } |
| cpu_stl_data_ra(env, fptr + 0x40, vfp_get_fpscr(env), ra); |
| if (cpu_isar_feature(aa32_mve, cpu)) { |
| cpu_stl_data_ra(env, fptr + 0x44, env->v7m.vpr, ra); |
| } |
| |
| /* |
| * If TS is 0 then s0 to s15, FPSCR and VPR are UNKNOWN; we choose to |
| * leave them unchanged, matching our choice in v7m_preserve_fp_state. |
| */ |
| if (ts) { |
| for (i = 0; i < 32; i += 2) { |
| *aa32_vfp_dreg(env, i / 2) = 0; |
| } |
| vfp_set_fpscr(env, 0); |
| if (cpu_isar_feature(aa32_mve, cpu)) { |
| env->v7m.vpr = 0; |
| } |
| } |
| } else { |
| v7m_update_fpccr(env, fptr, false); |
| } |
| |
| env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; |
| } |
| |
| void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uintptr_t ra = GETPC(); |
| |
| /* fptr is the value of Rn, the frame pointer we load the FP regs from */ |
| assert(env->v7m.secure); |
| |
| if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { |
| return; |
| } |
| |
| /* Check access to the coprocessor is permitted */ |
| if (!v7m_cpacr_pass(env, true, arm_current_el(env) != 0)) { |
| raise_exception_ra(env, EXCP_NOCP, 0, 1, GETPC()); |
| } |
| |
| if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { |
| /* State in FP is still valid */ |
| env->v7m.fpccr[M_REG_S] &= ~R_V7M_FPCCR_LSPACT_MASK; |
| } else { |
| bool ts = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK; |
| int i; |
| uint32_t fpscr; |
| |
| if (fptr & 7) { |
| raise_exception_ra(env, EXCP_UNALIGNED, 0, 1, GETPC()); |
| } |
| |
| for (i = 0; i < (ts ? 32 : 16); i += 2) { |
| uint32_t slo, shi; |
| uint64_t dn; |
| uint32_t faddr = fptr + 4 * i; |
| |
| if (i >= 16) { |
| faddr += 8; /* skip the slot for the FPSCR and VPR */ |
| } |
| |
| slo = cpu_ldl_data_ra(env, faddr, ra); |
| shi = cpu_ldl_data_ra(env, faddr + 4, ra); |
| |
| dn = (uint64_t) shi << 32 | slo; |
| *aa32_vfp_dreg(env, i / 2) = dn; |
| } |
| fpscr = cpu_ldl_data_ra(env, fptr + 0x40, ra); |
| vfp_set_fpscr(env, fpscr); |
| if (cpu_isar_feature(aa32_mve, cpu)) { |
| env->v7m.vpr = cpu_ldl_data_ra(env, fptr + 0x44, ra); |
| } |
| } |
| |
| env->v7m.control[M_REG_S] |= R_V7M_CONTROL_FPCA_MASK; |
| } |
| |
| static bool v7m_push_stack(ARMCPU *cpu) |
| { |
| /* |
| * Do the "set up stack frame" part of exception entry, |
| * similar to pseudocode PushStack(). |
| * Return true if we generate a derived exception (and so |
| * should ignore further stack faults trying to process |
| * that derived exception.) |
| */ |
| bool stacked_ok = true, limitviol = false; |
| CPUARMState *env = &cpu->env; |
| uint32_t xpsr = xpsr_read(env); |
| uint32_t frameptr = env->regs[13]; |
| ARMMMUIdx mmu_idx = arm_mmu_idx(env); |
| uint32_t framesize; |
| bool nsacr_cp10 = extract32(env->v7m.nsacr, 10, 1); |
| |
| if ((env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) && |
| (env->v7m.secure || nsacr_cp10)) { |
| if (env->v7m.secure && |
| env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK) { |
| framesize = 0xa8; |
| } else { |
| framesize = 0x68; |
| } |
| } else { |
| framesize = 0x20; |
| } |
| |
| /* Align stack pointer if the guest wants that */ |
| if ((frameptr & 4) && |
| (env->v7m.ccr[env->v7m.secure] & R_V7M_CCR_STKALIGN_MASK)) { |
| frameptr -= 4; |
| xpsr |= XPSR_SPREALIGN; |
| } |
| |
| xpsr &= ~XPSR_SFPA; |
| if (env->v7m.secure && |
| (env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)) { |
| xpsr |= XPSR_SFPA; |
| } |
| |
| frameptr -= framesize; |
| |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| uint32_t limit = v7m_sp_limit(env); |
| |
| if (frameptr < limit) { |
| /* |
| * Stack limit failure: set SP to the limit value, and generate |
| * STKOF UsageFault. Stack pushes below the limit must not be |
| * performed. It is IMPDEF whether pushes above the limit are |
| * performed; we choose not to. |
| */ |
| qemu_log_mask(CPU_LOG_INT, |
| "...STKOF during stacking\n"); |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_STKOF_MASK; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, |
| env->v7m.secure); |
| env->regs[13] = limit; |
| /* |
| * We won't try to perform any further memory accesses but |
| * we must continue through the following code to check for |
| * permission faults during FPU state preservation, and we |
| * must update FPCCR if lazy stacking is enabled. |
| */ |
| limitviol = true; |
| stacked_ok = false; |
| } |
| } |
| |
| /* |
| * Write as much of the stack frame as we can. If we fail a stack |
| * write this will result in a derived exception being pended |
| * (which may be taken in preference to the one we started with |
| * if it has higher priority). |
| */ |
| stacked_ok = stacked_ok && |
| v7m_stack_write(cpu, frameptr, env->regs[0], mmu_idx, STACK_NORMAL) && |
| v7m_stack_write(cpu, frameptr + 4, env->regs[1], |
| mmu_idx, STACK_NORMAL) && |
| v7m_stack_write(cpu, frameptr + 8, env->regs[2], |
| mmu_idx, STACK_NORMAL) && |
| v7m_stack_write(cpu, frameptr + 12, env->regs[3], |
| mmu_idx, STACK_NORMAL) && |
| v7m_stack_write(cpu, frameptr + 16, env->regs[12], |
| mmu_idx, STACK_NORMAL) && |
| v7m_stack_write(cpu, frameptr + 20, env->regs[14], |
| mmu_idx, STACK_NORMAL) && |
| v7m_stack_write(cpu, frameptr + 24, env->regs[15], |
| mmu_idx, STACK_NORMAL) && |
| v7m_stack_write(cpu, frameptr + 28, xpsr, mmu_idx, STACK_NORMAL); |
| |
| if (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) { |
| /* FPU is active, try to save its registers */ |
| bool fpccr_s = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; |
| bool lspact = env->v7m.fpccr[fpccr_s] & R_V7M_FPCCR_LSPACT_MASK; |
| |
| if (lspact && arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| qemu_log_mask(CPU_LOG_INT, |
| "...SecureFault because LSPACT and FPCA both set\n"); |
| env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); |
| } else if (!env->v7m.secure && !nsacr_cp10) { |
| qemu_log_mask(CPU_LOG_INT, |
| "...Secure UsageFault with CFSR.NOCP because " |
| "NSACR.CP10 prevents stacking FP regs\n"); |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, M_REG_S); |
| env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; |
| } else { |
| if (!(env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPEN_MASK)) { |
| /* Lazy stacking disabled, save registers now */ |
| int i; |
| bool cpacr_pass = v7m_cpacr_pass(env, env->v7m.secure, |
| arm_current_el(env) != 0); |
| |
| if (stacked_ok && !cpacr_pass) { |
| /* |
| * Take UsageFault if CPACR forbids access. The pseudocode |
| * here does a full CheckCPEnabled() but we know the NSACR |
| * check can never fail as we have already handled that. |
| */ |
| qemu_log_mask(CPU_LOG_INT, |
| "...UsageFault with CFSR.NOCP because " |
| "CPACR.CP10 prevents stacking FP regs\n"); |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, |
| env->v7m.secure); |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_NOCP_MASK; |
| stacked_ok = false; |
| } |
| |
| for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { |
| uint64_t dn = *aa32_vfp_dreg(env, i / 2); |
| uint32_t faddr = frameptr + 0x20 + 4 * i; |
| uint32_t slo = extract64(dn, 0, 32); |
| uint32_t shi = extract64(dn, 32, 32); |
| |
| if (i >= 16) { |
| faddr += 8; /* skip the slot for the FPSCR and VPR */ |
| } |
| stacked_ok = stacked_ok && |
| v7m_stack_write(cpu, faddr, slo, |
| mmu_idx, STACK_NORMAL) && |
| v7m_stack_write(cpu, faddr + 4, shi, |
| mmu_idx, STACK_NORMAL); |
| } |
| stacked_ok = stacked_ok && |
| v7m_stack_write(cpu, frameptr + 0x60, |
| vfp_get_fpscr(env), mmu_idx, STACK_NORMAL); |
| if (cpu_isar_feature(aa32_mve, cpu)) { |
| stacked_ok = stacked_ok && |
| v7m_stack_write(cpu, frameptr + 0x64, |
| env->v7m.vpr, mmu_idx, STACK_NORMAL); |
| } |
| if (cpacr_pass) { |
| for (i = 0; i < ((framesize == 0xa8) ? 32 : 16); i += 2) { |
| *aa32_vfp_dreg(env, i / 2) = 0; |
| } |
| vfp_set_fpscr(env, 0); |
| if (cpu_isar_feature(aa32_mve, cpu)) { |
| env->v7m.vpr = 0; |
| } |
| } |
| } else { |
| /* Lazy stacking enabled, save necessary info to stack later */ |
| v7m_update_fpccr(env, frameptr + 0x20, true); |
| } |
| } |
| } |
| |
| /* |
| * If we broke a stack limit then SP was already updated earlier; |
| * otherwise we update SP regardless of whether any of the stack |
| * accesses failed or we took some other kind of fault. |
| */ |
| if (!limitviol) { |
| env->regs[13] = frameptr; |
| } |
| |
| return !stacked_ok; |
| } |
| |
| static void do_v7m_exception_exit(ARMCPU *cpu) |
| { |
| CPUARMState *env = &cpu->env; |
| uint32_t excret; |
| uint32_t xpsr, xpsr_mask; |
| bool ufault = false; |
| bool sfault = false; |
| bool return_to_sp_process; |
| bool return_to_handler; |
| bool rettobase = false; |
| bool exc_secure = false; |
| bool return_to_secure; |
| bool ftype; |
| bool restore_s16_s31 = false; |
| |
| /* |
| * If we're not in Handler mode then jumps to magic exception-exit |
| * addresses don't have magic behaviour. However for the v8M |
| * security extensions the magic secure-function-return has to |
| * work in thread mode too, so to avoid doing an extra check in |
| * the generated code we allow exception-exit magic to also cause the |
| * internal exception and bring us here in thread mode. Correct code |
| * will never try to do this (the following insn fetch will always |
| * fault) so we the overhead of having taken an unnecessary exception |
| * doesn't matter. |
| */ |
| if (!arm_v7m_is_handler_mode(env)) { |
| return; |
| } |
| |
| /* |
| * In the spec pseudocode ExceptionReturn() is called directly |
| * from BXWritePC() and gets the full target PC value including |
| * bit zero. In QEMU's implementation we treat it as a normal |
| * jump-to-register (which is then caught later on), and so split |
| * the target value up between env->regs[15] and env->thumb in |
| * gen_bx(). Reconstitute it. |
| */ |
| excret = env->regs[15]; |
| if (env->thumb) { |
| excret |= 1; |
| } |
| |
| qemu_log_mask(CPU_LOG_INT, "Exception return: magic PC %" PRIx32 |
| " previous exception %d\n", |
| excret, env->v7m.exception); |
| |
| if ((excret & R_V7M_EXCRET_RES1_MASK) != R_V7M_EXCRET_RES1_MASK) { |
| qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero high bits in exception " |
| "exit PC value 0x%" PRIx32 " are UNPREDICTABLE\n", |
| excret); |
| } |
| |
| ftype = excret & R_V7M_EXCRET_FTYPE_MASK; |
| |
| if (!ftype && !cpu_isar_feature(aa32_vfp_simd, cpu)) { |
| qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero FTYPE in exception " |
| "exit PC value 0x%" PRIx32 " is UNPREDICTABLE " |
| "if FPU not present\n", |
| excret); |
| ftype = true; |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| /* |
| * EXC_RETURN.ES validation check (R_SMFL). We must do this before |
| * we pick which FAULTMASK to clear. |
| */ |
| if (!env->v7m.secure && |
| ((excret & R_V7M_EXCRET_ES_MASK) || |
| !(excret & R_V7M_EXCRET_DCRS_MASK))) { |
| sfault = 1; |
| /* For all other purposes, treat ES as 0 (R_HXSR) */ |
| excret &= ~R_V7M_EXCRET_ES_MASK; |
| } |
| exc_secure = excret & R_V7M_EXCRET_ES_MASK; |
| } |
| |
| if (env->v7m.exception != ARMV7M_EXCP_NMI) { |
| /* |
| * Auto-clear FAULTMASK on return from other than NMI. |
| * If the security extension is implemented then this only |
| * happens if the raw execution priority is >= 0; the |
| * value of the ES bit in the exception return value indicates |
| * which security state's faultmask to clear. (v8M ARM ARM R_KBNF.) |
| */ |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| if (armv7m_nvic_raw_execution_priority(env->nvic) >= 0) { |
| env->v7m.faultmask[exc_secure] = 0; |
| } |
| } else { |
| env->v7m.faultmask[M_REG_NS] = 0; |
| } |
| } |
| |
| switch (armv7m_nvic_complete_irq(env->nvic, env->v7m.exception, |
| exc_secure)) { |
| case -1: |
| /* attempt to exit an exception that isn't active */ |
| ufault = true; |
| break; |
| case 0: |
| /* still an irq active now */ |
| break; |
| case 1: |
| /* |
| * We returned to base exception level, no nesting. |
| * (In the pseudocode this is written using "NestedActivation != 1" |
| * where we have 'rettobase == false'.) |
| */ |
| rettobase = true; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| return_to_handler = !(excret & R_V7M_EXCRET_MODE_MASK); |
| return_to_sp_process = excret & R_V7M_EXCRET_SPSEL_MASK; |
| return_to_secure = arm_feature(env, ARM_FEATURE_M_SECURITY) && |
| (excret & R_V7M_EXCRET_S_MASK); |
| |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| if (!arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| /* |
| * UNPREDICTABLE if S == 1 or DCRS == 0 or ES == 1 (R_XLCP); |
| * we choose to take the UsageFault. |
| */ |
| if ((excret & R_V7M_EXCRET_S_MASK) || |
| (excret & R_V7M_EXCRET_ES_MASK) || |
| !(excret & R_V7M_EXCRET_DCRS_MASK)) { |
| ufault = true; |
| } |
| } |
| if (excret & R_V7M_EXCRET_RES0_MASK) { |
| ufault = true; |
| } |
| } else { |
| /* For v7M we only recognize certain combinations of the low bits */ |
| switch (excret & 0xf) { |
| case 1: /* Return to Handler */ |
| break; |
| case 13: /* Return to Thread using Process stack */ |
| case 9: /* Return to Thread using Main stack */ |
| /* |
| * We only need to check NONBASETHRDENA for v7M, because in |
| * v8M this bit does not exist (it is RES1). |
| */ |
| if (!rettobase && |
| !(env->v7m.ccr[env->v7m.secure] & |
| R_V7M_CCR_NONBASETHRDENA_MASK)) { |
| ufault = true; |
| } |
| break; |
| default: |
| ufault = true; |
| } |
| } |
| |
| /* |
| * Set CONTROL.SPSEL from excret.SPSEL. Since we're still in |
| * Handler mode (and will be until we write the new XPSR.Interrupt |
| * field) this does not switch around the current stack pointer. |
| * We must do this before we do any kind of tailchaining, including |
| * for the derived exceptions on integrity check failures, or we will |
| * give the guest an incorrect EXCRET.SPSEL value on exception entry. |
| */ |
| write_v7m_control_spsel_for_secstate(env, return_to_sp_process, exc_secure); |
| |
| /* |
| * Clear scratch FP values left in caller saved registers; this |
| * must happen before any kind of tail chaining. |
| */ |
| if ((env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_CLRONRET_MASK) && |
| (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { |
| if (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK) { |
| env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); |
| qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " |
| "stackframe: error during lazy state deactivation\n"); |
| v7m_exception_taken(cpu, excret, true, false); |
| return; |
| } else { |
| if (arm_feature(env, ARM_FEATURE_V8_1M)) { |
| /* v8.1M adds this NOCP check */ |
| bool nsacr_pass = exc_secure || |
| extract32(env->v7m.nsacr, 10, 1); |
| bool cpacr_pass = v7m_cpacr_pass(env, exc_secure, true); |
| if (!nsacr_pass) { |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, true); |
| env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_NOCP_MASK; |
| qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " |
| "stackframe: NSACR prevents clearing FPU registers\n"); |
| v7m_exception_taken(cpu, excret, true, false); |
| return; |
| } else if (!cpacr_pass) { |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, |
| exc_secure); |
| env->v7m.cfsr[exc_secure] |= R_V7M_CFSR_NOCP_MASK; |
| qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " |
| "stackframe: CPACR prevents clearing FPU registers\n"); |
| v7m_exception_taken(cpu, excret, true, false); |
| return; |
| } |
| } |
| /* Clear s0..s15, FPSCR and VPR */ |
| int i; |
| |
| for (i = 0; i < 16; i += 2) { |
| *aa32_vfp_dreg(env, i / 2) = 0; |
| } |
| vfp_set_fpscr(env, 0); |
| if (cpu_isar_feature(aa32_mve, cpu)) { |
| env->v7m.vpr = 0; |
| } |
| } |
| } |
| |
| if (sfault) { |
| env->v7m.sfsr |= R_V7M_SFSR_INVER_MASK; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); |
| qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " |
| "stackframe: failed EXC_RETURN.ES validity check\n"); |
| v7m_exception_taken(cpu, excret, true, false); |
| return; |
| } |
| |
| if (ufault) { |
| /* |
| * Bad exception return: instead of popping the exception |
| * stack, directly take a usage fault on the current stack. |
| */ |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); |
| qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " |
| "stackframe: failed exception return integrity check\n"); |
| v7m_exception_taken(cpu, excret, true, false); |
| return; |
| } |
| |
| /* |
| * Tailchaining: if there is currently a pending exception that |
| * is high enough priority to preempt execution at the level we're |
| * about to return to, then just directly take that exception now, |
| * avoiding an unstack-and-then-stack. Note that now we have |
| * deactivated the previous exception by calling armv7m_nvic_complete_irq() |
| * our current execution priority is already the execution priority we are |
| * returning to -- none of the state we would unstack or set based on |
| * the EXCRET value affects it. |
| */ |
| if (armv7m_nvic_can_take_pending_exception(env->nvic)) { |
| qemu_log_mask(CPU_LOG_INT, "...tailchaining to pending exception\n"); |
| v7m_exception_taken(cpu, excret, true, false); |
| return; |
| } |
| |
| switch_v7m_security_state(env, return_to_secure); |
| |
| { |
| /* |
| * The stack pointer we should be reading the exception frame from |
| * depends on bits in the magic exception return type value (and |
| * for v8M isn't necessarily the stack pointer we will eventually |
| * end up resuming execution with). Get a pointer to the location |
| * in the CPU state struct where the SP we need is currently being |
| * stored; we will use and modify it in place. |
| * We use this limited C variable scope so we don't accidentally |
| * use 'frame_sp_p' after we do something that makes it invalid. |
| */ |
| bool spsel = env->v7m.control[return_to_secure] & R_V7M_CONTROL_SPSEL_MASK; |
| uint32_t *frame_sp_p = arm_v7m_get_sp_ptr(env, return_to_secure, |
| !return_to_handler, spsel); |
| uint32_t frameptr = *frame_sp_p; |
| bool pop_ok = true; |
| ARMMMUIdx mmu_idx; |
| bool return_to_priv = return_to_handler || |
| !(env->v7m.control[return_to_secure] & R_V7M_CONTROL_NPRIV_MASK); |
| |
| mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, return_to_secure, |
| return_to_priv); |
| |
| if (!QEMU_IS_ALIGNED(frameptr, 8) && |
| arm_feature(env, ARM_FEATURE_V8)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "M profile exception return with non-8-aligned SP " |
| "for destination state is UNPREDICTABLE\n"); |
| } |
| |
| /* Do we need to pop callee-saved registers? */ |
| if (return_to_secure && |
| ((excret & R_V7M_EXCRET_ES_MASK) == 0 || |
| (excret & R_V7M_EXCRET_DCRS_MASK) == 0)) { |
| uint32_t actual_sig; |
| |
| pop_ok = v7m_stack_read(cpu, &actual_sig, frameptr, mmu_idx); |
| |
| if (pop_ok && v7m_integrity_sig(env, excret) != actual_sig) { |
| /* Take a SecureFault on the current stack */ |
| env->v7m.sfsr |= R_V7M_SFSR_INVIS_MASK; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); |
| qemu_log_mask(CPU_LOG_INT, "...taking SecureFault on existing " |
| "stackframe: failed exception return integrity " |
| "signature check\n"); |
| v7m_exception_taken(cpu, excret, true, false); |
| return; |
| } |
| |
| pop_ok = pop_ok && |
| v7m_stack_read(cpu, &env->regs[4], frameptr + 0x8, mmu_idx) && |
| v7m_stack_read(cpu, &env->regs[5], frameptr + 0xc, mmu_idx) && |
| v7m_stack_read(cpu, &env->regs[6], frameptr + 0x10, mmu_idx) && |
| v7m_stack_read(cpu, &env->regs[7], frameptr + 0x14, mmu_idx) && |
| v7m_stack_read(cpu, &env->regs[8], frameptr + 0x18, mmu_idx) && |
| v7m_stack_read(cpu, &env->regs[9], frameptr + 0x1c, mmu_idx) && |
| v7m_stack_read(cpu, &env->regs[10], frameptr + 0x20, mmu_idx) && |
| v7m_stack_read(cpu, &env->regs[11], frameptr + 0x24, mmu_idx); |
| |
| frameptr += 0x28; |
| } |
| |
| /* Pop registers */ |
| pop_ok = pop_ok && |
| v7m_stack_read(cpu, &env->regs[0], frameptr, mmu_idx) && |
| v7m_stack_read(cpu, &env->regs[1], frameptr + 0x4, mmu_idx) && |
| v7m_stack_read(cpu, &env->regs[2], frameptr + 0x8, mmu_idx) && |
| v7m_stack_read(cpu, &env->regs[3], frameptr + 0xc, mmu_idx) && |
| v7m_stack_read(cpu, &env->regs[12], frameptr + 0x10, mmu_idx) && |
| v7m_stack_read(cpu, &env->regs[14], frameptr + 0x14, mmu_idx) && |
| v7m_stack_read(cpu, &env->regs[15], frameptr + 0x18, mmu_idx) && |
| v7m_stack_read(cpu, &xpsr, frameptr + 0x1c, mmu_idx); |
| |
| if (!pop_ok) { |
| /* |
| * v7m_stack_read() pended a fault, so take it (as a tail |
| * chained exception on the same stack frame) |
| */ |
| qemu_log_mask(CPU_LOG_INT, "...derived exception on unstacking\n"); |
| v7m_exception_taken(cpu, excret, true, false); |
| return; |
| } |
| |
| /* |
| * Returning from an exception with a PC with bit 0 set is defined |
| * behaviour on v8M (bit 0 is ignored), but for v7M it was specified |
| * to be UNPREDICTABLE. In practice actual v7M hardware seems to ignore |
| * the lsbit, and there are several RTOSes out there which incorrectly |
| * assume the r15 in the stack frame should be a Thumb-style "lsbit |
| * indicates ARM/Thumb" value, so ignore the bit on v7M as well, but |
| * complain about the badly behaved guest. |
| */ |
| if (env->regs[15] & 1) { |
| env->regs[15] &= ~1U; |
| if (!arm_feature(env, ARM_FEATURE_V8)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "M profile return from interrupt with misaligned " |
| "PC is UNPREDICTABLE on v7M\n"); |
| } |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| /* |
| * For v8M we have to check whether the xPSR exception field |
| * matches the EXCRET value for return to handler/thread |
| * before we commit to changing the SP and xPSR. |
| */ |
| bool will_be_handler = (xpsr & XPSR_EXCP) != 0; |
| if (return_to_handler != will_be_handler) { |
| /* |
| * Take an INVPC UsageFault on the current stack. |
| * By this point we will have switched to the security state |
| * for the background state, so this UsageFault will target |
| * that state. |
| */ |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, |
| env->v7m.secure); |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; |
| qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " |
| "stackframe: failed exception return integrity " |
| "check\n"); |
| v7m_exception_taken(cpu, excret, true, false); |
| return; |
| } |
| } |
| |
| if (!ftype) { |
| /* FP present and we need to handle it */ |
| if (!return_to_secure && |
| (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_LSPACT_MASK)) { |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); |
| env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; |
| qemu_log_mask(CPU_LOG_INT, |
| "...taking SecureFault on existing stackframe: " |
| "Secure LSPACT set but exception return is " |
| "not to secure state\n"); |
| v7m_exception_taken(cpu, excret, true, false); |
| return; |
| } |
| |
| restore_s16_s31 = return_to_secure && |
| (env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_TS_MASK); |
| |
| if (env->v7m.fpccr[return_to_secure] & R_V7M_FPCCR_LSPACT_MASK) { |
| /* State in FPU is still valid, just clear LSPACT */ |
| env->v7m.fpccr[return_to_secure] &= ~R_V7M_FPCCR_LSPACT_MASK; |
| } else { |
| int i; |
| uint32_t fpscr; |
| bool cpacr_pass, nsacr_pass; |
| |
| cpacr_pass = v7m_cpacr_pass(env, return_to_secure, |
| return_to_priv); |
| nsacr_pass = return_to_secure || |
| extract32(env->v7m.nsacr, 10, 1); |
| |
| if (!cpacr_pass) { |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, |
| return_to_secure); |
| env->v7m.cfsr[return_to_secure] |= R_V7M_CFSR_NOCP_MASK; |
| qemu_log_mask(CPU_LOG_INT, |
| "...taking UsageFault on existing " |
| "stackframe: CPACR.CP10 prevents unstacking " |
| "FP regs\n"); |
| v7m_exception_taken(cpu, excret, true, false); |
| return; |
| } else if (!nsacr_pass) { |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, true); |
| env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_INVPC_MASK; |
| qemu_log_mask(CPU_LOG_INT, |
| "...taking Secure UsageFault on existing " |
| "stackframe: NSACR.CP10 prevents unstacking " |
| "FP regs\n"); |
| v7m_exception_taken(cpu, excret, true, false); |
| return; |
| } |
| |
| for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { |
| uint32_t slo, shi; |
| uint64_t dn; |
| uint32_t faddr = frameptr + 0x20 + 4 * i; |
| |
| if (i >= 16) { |
| faddr += 8; /* Skip the slot for the FPSCR and VPR */ |
| } |
| |
| pop_ok = pop_ok && |
| v7m_stack_read(cpu, &slo, faddr, mmu_idx) && |
| v7m_stack_read(cpu, &shi, faddr + 4, mmu_idx); |
| |
| if (!pop_ok) { |
| break; |
| } |
| |
| dn = (uint64_t)shi << 32 | slo; |
| *aa32_vfp_dreg(env, i / 2) = dn; |
| } |
| pop_ok = pop_ok && |
| v7m_stack_read(cpu, &fpscr, frameptr + 0x60, mmu_idx); |
| if (pop_ok) { |
| vfp_set_fpscr(env, fpscr); |
| } |
| if (cpu_isar_feature(aa32_mve, cpu)) { |
| pop_ok = pop_ok && |
| v7m_stack_read(cpu, &env->v7m.vpr, |
| frameptr + 0x64, mmu_idx); |
| } |
| if (!pop_ok) { |
| /* |
| * These regs are 0 if security extension present; |
| * otherwise merely UNKNOWN. We zero always. |
| */ |
| for (i = 0; i < (restore_s16_s31 ? 32 : 16); i += 2) { |
| *aa32_vfp_dreg(env, i / 2) = 0; |
| } |
| vfp_set_fpscr(env, 0); |
| if (cpu_isar_feature(aa32_mve, cpu)) { |
| env->v7m.vpr = 0; |
| } |
| } |
| } |
| } |
| env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], |
| V7M_CONTROL, FPCA, !ftype); |
| |
| /* Commit to consuming the stack frame */ |
| frameptr += 0x20; |
| if (!ftype) { |
| frameptr += 0x48; |
| if (restore_s16_s31) { |
| frameptr += 0x40; |
| } |
| } |
| /* |
| * Undo stack alignment (the SPREALIGN bit indicates that the original |
| * pre-exception SP was not 8-aligned and we added a padding word to |
| * align it, so we undo this by ORing in the bit that increases it |
| * from the current 8-aligned value to the 8-unaligned value. (Adding 4 |
| * would work too but a logical OR is how the pseudocode specifies it.) |
| */ |
| if (xpsr & XPSR_SPREALIGN) { |
| frameptr |= 4; |
| } |
| *frame_sp_p = frameptr; |
| } |
| |
| xpsr_mask = ~(XPSR_SPREALIGN | XPSR_SFPA); |
| if (!arm_feature(env, ARM_FEATURE_THUMB_DSP)) { |
| xpsr_mask &= ~XPSR_GE; |
| } |
| /* This xpsr_write() will invalidate frame_sp_p as it may switch stack */ |
| xpsr_write(env, xpsr, xpsr_mask); |
| |
| if (env->v7m.secure) { |
| bool sfpa = xpsr & XPSR_SFPA; |
| |
| env->v7m.control[M_REG_S] = FIELD_DP32(env->v7m.control[M_REG_S], |
| V7M_CONTROL, SFPA, sfpa); |
| } |
| |
| /* |
| * The restored xPSR exception field will be zero if we're |
| * resuming in Thread mode. If that doesn't match what the |
| * exception return excret specified then this is a UsageFault. |
| * v7M requires we make this check here; v8M did it earlier. |
| */ |
| if (return_to_handler != arm_v7m_is_handler_mode(env)) { |
| /* |
| * Take an INVPC UsageFault by pushing the stack again; |
| * we know we're v7M so this is never a Secure UsageFault. |
| */ |
| bool ignore_stackfaults; |
| |
| assert(!arm_feature(env, ARM_FEATURE_V8)); |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, false); |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; |
| ignore_stackfaults = v7m_push_stack(cpu); |
| qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on new stackframe: " |
| "failed exception return integrity check\n"); |
| v7m_exception_taken(cpu, excret, false, ignore_stackfaults); |
| return; |
| } |
| |
| /* Otherwise, we have a successful exception exit. */ |
| arm_clear_exclusive(env); |
| arm_rebuild_hflags(env); |
| qemu_log_mask(CPU_LOG_INT, "...successful exception return\n"); |
| } |
| |
| static bool do_v7m_function_return(ARMCPU *cpu) |
| { |
| /* |
| * v8M security extensions magic function return. |
| * We may either: |
| * (1) throw an exception (longjump) |
| * (2) return true if we successfully handled the function return |
| * (3) return false if we failed a consistency check and have |
| * pended a UsageFault that needs to be taken now |
| * |
| * At this point the magic return value is split between env->regs[15] |
| * and env->thumb. We don't bother to reconstitute it because we don't |
| * need it (all values are handled the same way). |
| */ |
| CPUARMState *env = &cpu->env; |
| uint32_t newpc, newpsr, newpsr_exc; |
| |
| qemu_log_mask(CPU_LOG_INT, "...really v7M secure function return\n"); |
| |
| { |
| bool threadmode, spsel; |
| MemOpIdx oi; |
| ARMMMUIdx mmu_idx; |
| uint32_t *frame_sp_p; |
| uint32_t frameptr; |
| |
| /* Pull the return address and IPSR from the Secure stack */ |
| threadmode = !arm_v7m_is_handler_mode(env); |
| spsel = env->v7m.control[M_REG_S] & R_V7M_CONTROL_SPSEL_MASK; |
| |
| frame_sp_p = arm_v7m_get_sp_ptr(env, true, threadmode, spsel); |
| frameptr = *frame_sp_p; |
| |
| /* |
| * These loads may throw an exception (for MPU faults). We want to |
| * do them as secure, so work out what MMU index that is. |
| */ |
| mmu_idx = arm_v7m_mmu_idx_for_secstate(env, true); |
| oi = make_memop_idx(MO_LEUL, arm_to_core_mmu_idx(mmu_idx)); |
| newpc = cpu_ldl_mmu(env, frameptr, oi, 0); |
| newpsr = cpu_ldl_mmu(env, frameptr + 4, oi, 0); |
| |
| /* Consistency checks on new IPSR */ |
| newpsr_exc = newpsr & XPSR_EXCP; |
| if (!((env->v7m.exception == 0 && newpsr_exc == 0) || |
| (env->v7m.exception == 1 && newpsr_exc != 0))) { |
| /* Pend the fault and tell our caller to take it */ |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, |
| env->v7m.secure); |
| qemu_log_mask(CPU_LOG_INT, |
| "...taking INVPC UsageFault: " |
| "IPSR consistency check failed\n"); |
| return false; |
| } |
| |
| *frame_sp_p = frameptr + 8; |
| } |
| |
| /* This invalidates frame_sp_p */ |
| switch_v7m_security_state(env, true); |
| env->v7m.exception = newpsr_exc; |
| env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; |
| if (newpsr & XPSR_SFPA) { |
| env->v7m.control[M_REG_S] |= R_V7M_CONTROL_SFPA_MASK; |
| } |
| xpsr_write(env, 0, XPSR_IT); |
| env->thumb = newpc & 1; |
| env->regs[15] = newpc & ~1; |
| arm_rebuild_hflags(env); |
| |
| qemu_log_mask(CPU_LOG_INT, "...function return successful\n"); |
| return true; |
| } |
| |
| static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx, bool secure, |
| uint32_t addr, uint16_t *insn) |
| { |
| /* |
| * Load a 16-bit portion of a v7M instruction, returning true on success, |
| * or false on failure (in which case we will have pended the appropriate |
| * exception). |
| * We need to do the instruction fetch's MPU and SAU checks |
| * like this because there is no MMU index that would allow |
| * doing the load with a single function call. Instead we must |
| * first check that the security attributes permit the load |
| * and that they don't mismatch on the two halves of the instruction, |
| * and then we do the load as a secure load (ie using the security |
| * attributes of the address, not the CPU, as architecturally required). |
| */ |
| CPUState *cs = CPU(cpu); |
| CPUARMState *env = &cpu->env; |
| V8M_SAttributes sattrs = {}; |
| GetPhysAddrResult res = {}; |
| ARMMMUFaultInfo fi = {}; |
| MemTxResult txres; |
| |
| v8m_security_lookup(env, addr, MMU_INST_FETCH, mmu_idx, secure, &sattrs); |
| if (!sattrs.nsc || sattrs.ns) { |
| /* |
| * This must be the second half of the insn, and it straddles a |
| * region boundary with the second half not being S&NSC. |
| */ |
| env->v7m.sfsr |= R_V7M_SFSR_INVEP_MASK; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); |
| qemu_log_mask(CPU_LOG_INT, |
| "...really SecureFault with SFSR.INVEP\n"); |
| return false; |
| } |
| if (get_phys_addr(env, addr, MMU_INST_FETCH, mmu_idx, &res, &fi)) { |
| /* the MPU lookup failed */ |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_IACCVIOL_MASK; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM, env->v7m.secure); |
| qemu_log_mask(CPU_LOG_INT, "...really MemManage with CFSR.IACCVIOL\n"); |
| return false; |
| } |
| *insn = address_space_lduw_le(arm_addressspace(cs, res.f.attrs), |
| res.f.phys_addr, res.f.attrs, &txres); |
| if (txres != MEMTX_OK) { |
| env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_IBUSERR_MASK; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS, false); |
| qemu_log_mask(CPU_LOG_INT, "...really BusFault with CFSR.IBUSERR\n"); |
| return false; |
| } |
| return true; |
| } |
| |
| static bool v7m_read_sg_stack_word(ARMCPU *cpu, ARMMMUIdx mmu_idx, |
| uint32_t addr, uint32_t *spdata) |
| { |
| /* |
| * Read a word of data from the stack for the SG instruction, |
| * writing the value into *spdata. If the load succeeds, return |
| * true; otherwise pend an appropriate exception and return false. |
| * (We can't use data load helpers here that throw an exception |
| * because of the context we're called in, which is halfway through |
| * arm_v7m_cpu_do_interrupt().) |
| */ |
| CPUState *cs = CPU(cpu); |
| CPUARMState *env = &cpu->env; |
| MemTxResult txres; |
| GetPhysAddrResult res = {}; |
| ARMMMUFaultInfo fi = {}; |
| uint32_t value; |
| |
| if (get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &res, &fi)) { |
| /* MPU/SAU lookup failed */ |
| if (fi.type == ARMFault_QEMU_SFault) { |
| qemu_log_mask(CPU_LOG_INT, |
| "...SecureFault during stack word read\n"); |
| env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK | R_V7M_SFSR_SFARVALID_MASK; |
| env->v7m.sfar = addr; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); |
| } else { |
| qemu_log_mask(CPU_LOG_INT, |
| "...MemManageFault during stack word read\n"); |
| env->v7m.cfsr[M_REG_S] |= R_V7M_CFSR_DACCVIOL_MASK | |
| R_V7M_CFSR_MMARVALID_MASK; |
| env->v7m.mmfar[M_REG_S] = addr; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM, false); |
| } |
| return false; |
| } |
| value = address_space_ldl(arm_addressspace(cs, res.f.attrs), |
| res.f.phys_addr, res.f.attrs, &txres); |
| if (txres != MEMTX_OK) { |
| /* BusFault trying to read the data */ |
| qemu_log_mask(CPU_LOG_INT, |
| "...BusFault during stack word read\n"); |
| env->v7m.cfsr[M_REG_NS] |= |
| (R_V7M_CFSR_PRECISERR_MASK | R_V7M_CFSR_BFARVALID_MASK); |
| env->v7m.bfar = addr; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS, false); |
| return false; |
| } |
| |
| *spdata = value; |
| return true; |
| } |
| |
| static bool v7m_handle_execute_nsc(ARMCPU *cpu) |
| { |
| /* |
| * Check whether this attempt to execute code in a Secure & NS-Callable |
| * memory region is for an SG instruction; if so, then emulate the |
| * effect of the SG instruction and return true. Otherwise pend |
| * the correct kind of exception and return false. |
| */ |
| CPUARMState *env = &cpu->env; |
| ARMMMUIdx mmu_idx; |
| uint16_t insn; |
| |
| /* |
| * We should never get here unless get_phys_addr_pmsav8() caused |
| * an exception for NS executing in S&NSC memory. |
| */ |
| assert(!env->v7m.secure); |
| assert(arm_feature(env, ARM_FEATURE_M_SECURITY)); |
| |
| /* We want to do the MPU lookup as secure; work out what mmu_idx that is */ |
| mmu_idx = arm_v7m_mmu_idx_for_secstate(env, true); |
| |
| if (!v7m_read_half_insn(cpu, mmu_idx, true, env->regs[15], &insn)) { |
| return false; |
| } |
| |
| if (!env->thumb) { |
| goto gen_invep; |
| } |
| |
| if (insn != 0xe97f) { |
| /* |
| * Not an SG instruction first half (we choose the IMPDEF |
| * early-SG-check option). |
| */ |
| goto gen_invep; |
| } |
| |
| if (!v7m_read_half_insn(cpu, mmu_idx, true, env->regs[15] + 2, &insn)) { |
| return false; |
| } |
| |
| if (insn != 0xe97f) { |
| /* |
| * Not an SG instruction second half (yes, both halves of the SG |
| * insn have the same hex value) |
| */ |
| goto gen_invep; |
| } |
| |
| /* |
| * OK, we have confirmed that we really have an SG instruction. |
| * We know we're NS in S memory so don't need to repeat those checks. |
| */ |
| qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 |
| ", executing it\n", env->regs[15]); |
| |
| if (cpu_isar_feature(aa32_m_sec_state, cpu) && |
| !arm_v7m_is_handler_mode(env)) { |
| /* |
| * v8.1M exception stack frame integrity check. Note that we |
| * must perform the memory access even if CCR_S.TRD is zero |
| * and we aren't going to check what the data loaded is. |
| */ |
| uint32_t spdata, sp; |
| |
| /* |
| * We know we are currently NS, so the S stack pointers must be |
| * in other_ss_{psp,msp}, not in regs[13]/other_sp. |
| */ |
| sp = v7m_using_psp(env) ? env->v7m.other_ss_psp : env->v7m.other_ss_msp; |
| if (!v7m_read_sg_stack_word(cpu, mmu_idx, sp, &spdata)) { |
| /* Stack access failed and an exception has been pended */ |
| return false; |
| } |
| |
| if (env->v7m.ccr[M_REG_S] & R_V7M_CCR_TRD_MASK) { |
| if (((spdata & ~1) == 0xfefa125a) || |
| !(env->v7m.control[M_REG_S] & 1)) { |
| goto gen_invep; |
| } |
| } |
| } |
| |
| env->regs[14] &= ~1; |
| env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; |
| switch_v7m_security_state(env, true); |
| xpsr_write(env, 0, XPSR_IT); |
| env->regs[15] += 4; |
| arm_rebuild_hflags(env); |
| return true; |
| |
| gen_invep: |
| env->v7m.sfsr |= R_V7M_SFSR_INVEP_MASK; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); |
| qemu_log_mask(CPU_LOG_INT, |
| "...really SecureFault with SFSR.INVEP\n"); |
| return false; |
| } |
| |
| void arm_v7m_cpu_do_interrupt(CPUState *cs) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| uint32_t lr; |
| bool ignore_stackfaults; |
| |
| arm_log_exception(cs); |
| |
| /* |
| * For exceptions we just mark as pending on the NVIC, and let that |
| * handle it. |
| */ |
| switch (cs->exception_index) { |
| case EXCP_UDEF: |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNDEFINSTR_MASK; |
| break; |
| case EXCP_NOCP: |
| { |
| /* |
| * NOCP might be directed to something other than the current |
| * security state if this fault is because of NSACR; we indicate |
| * the target security state using exception.target_el. |
| */ |
| int target_secstate; |
| |
| if (env->exception.target_el == 3) { |
| target_secstate = M_REG_S; |
| } else { |
| target_secstate = env->v7m.secure; |
| } |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, target_secstate); |
| env->v7m.cfsr[target_secstate] |= R_V7M_CFSR_NOCP_MASK; |
| break; |
| } |
| case EXCP_INVSTATE: |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVSTATE_MASK; |
| break; |
| case EXCP_STKOF: |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_STKOF_MASK; |
| break; |
| case EXCP_LSERR: |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); |
| env->v7m.sfsr |= R_V7M_SFSR_LSERR_MASK; |
| break; |
| case EXCP_UNALIGNED: |
| /* Unaligned faults reported by M-profile aware code */ |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK; |
| break; |
| case EXCP_DIVBYZERO: |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_DIVBYZERO_MASK; |
| break; |
| case EXCP_SWI: |
| /* The PC already points to the next instruction. */ |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC, env->v7m.secure); |
| break; |
| case EXCP_PREFETCH_ABORT: |
| case EXCP_DATA_ABORT: |
| /* |
| * Note that for M profile we don't have a guest facing FSR, but |
| * the env->exception.fsr will be populated by the code that |
| * raises the fault, in the A profile short-descriptor format. |
| * |
| * Log the exception.vaddress now regardless of subtype, because |
| * logging below only logs it when it goes into a guest visible |
| * register. |
| */ |
| qemu_log_mask(CPU_LOG_INT, "...at fault address 0x%x\n", |
| (uint32_t)env->exception.vaddress); |
| switch (env->exception.fsr & 0xf) { |
| case M_FAKE_FSR_NSC_EXEC: |
| /* |
| * Exception generated when we try to execute code at an address |
| * which is marked as Secure & Non-Secure Callable and the CPU |
| * is in the Non-Secure state. The only instruction which can |
| * be executed like this is SG (and that only if both halves of |
| * the SG instruction have the same security attributes.) |
| * Everything else must generate an INVEP SecureFault, so we |
| * emulate the SG instruction here. |
| */ |
| if (v7m_handle_execute_nsc(cpu)) { |
| return; |
| } |
| break; |
| case M_FAKE_FSR_SFAULT: |
| /* |
| * Various flavours of SecureFault for attempts to execute or |
| * access data in the wrong security state. |
| */ |
| switch (cs->exception_index) { |
| case EXCP_PREFETCH_ABORT: |
| if (env->v7m.secure) { |
| env->v7m.sfsr |= R_V7M_SFSR_INVTRAN_MASK; |
| qemu_log_mask(CPU_LOG_INT, |
| "...really SecureFault with SFSR.INVTRAN\n"); |
| } else { |
| env->v7m.sfsr |= R_V7M_SFSR_INVEP_MASK; |
| qemu_log_mask(CPU_LOG_INT, |
| "...really SecureFault with SFSR.INVEP\n"); |
| } |
| break; |
| case EXCP_DATA_ABORT: |
| /* This must be an NS access to S memory */ |
| env->v7m.sfsr |= R_V7M_SFSR_AUVIOL_MASK; |
| qemu_log_mask(CPU_LOG_INT, |
| "...really SecureFault with SFSR.AUVIOL\n"); |
| break; |
| } |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SECURE, false); |
| break; |
| case 0x8: /* External Abort */ |
| switch (cs->exception_index) { |
| case EXCP_PREFETCH_ABORT: |
| env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_IBUSERR_MASK; |
| qemu_log_mask(CPU_LOG_INT, "...with CFSR.IBUSERR\n"); |
| break; |
| case EXCP_DATA_ABORT: |
| env->v7m.cfsr[M_REG_NS] |= |
| (R_V7M_CFSR_PRECISERR_MASK | R_V7M_CFSR_BFARVALID_MASK); |
| env->v7m.bfar = env->exception.vaddress; |
| qemu_log_mask(CPU_LOG_INT, |
| "...with CFSR.PRECISERR and BFAR 0x%x\n", |
| env->v7m.bfar); |
| break; |
| } |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS, false); |
| break; |
| case 0x1: /* Alignment fault reported by generic code */ |
| qemu_log_mask(CPU_LOG_INT, |
| "...really UsageFault with UFSR.UNALIGNED\n"); |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_UNALIGNED_MASK; |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, |
| env->v7m.secure); |
| break; |
| default: |
| /* |
| * All other FSR values are either MPU faults or "can't happen |
| * for M profile" cases. |
| */ |
| switch (cs->exception_index) { |
| case EXCP_PREFETCH_ABORT: |
| env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_IACCVIOL_MASK; |
| qemu_log_mask(CPU_LOG_INT, "...with CFSR.IACCVIOL\n"); |
| break; |
| case EXCP_DATA_ABORT: |
| env->v7m.cfsr[env->v7m.secure] |= |
| (R_V7M_CFSR_DACCVIOL_MASK | R_V7M_CFSR_MMARVALID_MASK); |
| env->v7m.mmfar[env->v7m.secure] = env->exception.vaddress; |
| qemu_log_mask(CPU_LOG_INT, |
| "...with CFSR.DACCVIOL and MMFAR 0x%x\n", |
| env->v7m.mmfar[env->v7m.secure]); |
| break; |
| } |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM, |
| env->v7m.secure); |
| break; |
| } |
| break; |
| case EXCP_SEMIHOST: |
| qemu_log_mask(CPU_LOG_INT, |
| "...handling as semihosting call 0x%x\n", |
| env->regs[0]); |
| #ifdef CONFIG_TCG |
| do_common_semihosting(cs); |
| #else |
| g_assert_not_reached(); |
| #endif |
| env->regs[15] += env->thumb ? 2 : 4; |
| return; |
| case EXCP_BKPT: |
| armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_DEBUG, false); |
| break; |
| case EXCP_IRQ: |
| break; |
| case EXCP_EXCEPTION_EXIT: |
| if (env->regs[15] < EXC_RETURN_MIN_MAGIC) { |
| /* Must be v8M security extension function return */ |
| assert(env->regs[15] >= FNC_RETURN_MIN_MAGIC); |
| assert(arm_feature(env, ARM_FEATURE_M_SECURITY)); |
| if (do_v7m_function_return(cpu)) { |
| return; |
| } |
| } else { |
| do_v7m_exception_exit(cpu); |
| return; |
| } |
| break; |
| case EXCP_LAZYFP: |
| /* |
| * We already pended the specific exception in the NVIC in the |
| * v7m_preserve_fp_state() helper function. |
| */ |
| break; |
| default: |
| cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); |
| return; /* Never happens. Keep compiler happy. */ |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| lr = R_V7M_EXCRET_RES1_MASK | |
| R_V7M_EXCRET_DCRS_MASK; |
| /* |
| * The S bit indicates whether we should return to Secure |
| * or NonSecure (ie our current state). |
| * The ES bit indicates whether we're taking this exception |
| * to Secure or NonSecure (ie our target state). We set it |
| * later, in v7m_exception_taken(). |
| * The SPSEL bit is also set in v7m_exception_taken() for v8M. |
| * This corresponds to the ARM ARM pseudocode for v8M setting |
| * some LR bits in PushStack() and some in ExceptionTaken(); |
| * the distinction matters for the tailchain cases where we |
| * can take an exception without pushing the stack. |
| */ |
| if (env->v7m.secure) { |
| lr |= R_V7M_EXCRET_S_MASK; |
| } |
| } else { |
| lr = R_V7M_EXCRET_RES1_MASK | |
| R_V7M_EXCRET_S_MASK | |
| R_V7M_EXCRET_DCRS_MASK | |
| R_V7M_EXCRET_ES_MASK; |
| if (env->v7m.control[M_REG_NS] & R_V7M_CONTROL_SPSEL_MASK) { |
| lr |= R_V7M_EXCRET_SPSEL_MASK; |
| } |
| } |
| if (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK)) { |
| lr |= R_V7M_EXCRET_FTYPE_MASK; |
| } |
| if (!arm_v7m_is_handler_mode(env)) { |
| lr |= R_V7M_EXCRET_MODE_MASK; |
| } |
| |
| ignore_stackfaults = v7m_push_stack(cpu); |
| v7m_exception_taken(cpu, lr, false, ignore_stackfaults); |
| } |
| |
| uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) |
| { |
| unsigned el = arm_current_el(env); |
| |
| /* First handle registers which unprivileged can read */ |
| switch (reg) { |
| case 0 ... 7: /* xPSR sub-fields */ |
| return v7m_mrs_xpsr(env, reg, el); |
| case 20: /* CONTROL */ |
| return arm_v7m_mrs_control(env, env->v7m.secure); |
| case 0x94: /* CONTROL_NS */ |
| /* |
| * We have to handle this here because unprivileged Secure code |
| * can read the NS CONTROL register. |
| */ |
| if (!env->v7m.secure) { |
| return 0; |
| } |
| return env->v7m.control[M_REG_NS] | |
| (env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK); |
| } |
| |
| if (el == 0) { |
| return 0; /* unprivileged reads others as zero */ |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| switch (reg) { |
| case 0x88: /* MSP_NS */ |
| if (!env->v7m.secure) { |
| return 0; |
| } |
| return env->v7m.other_ss_msp; |
| case 0x89: /* PSP_NS */ |
| if (!env->v7m.secure) { |
| return 0; |
| } |
| return env->v7m.other_ss_psp; |
| case 0x8a: /* MSPLIM_NS */ |
| if (!env->v7m.secure) { |
| return 0; |
| } |
| return env->v7m.msplim[M_REG_NS]; |
| case 0x8b: /* PSPLIM_NS */ |
| if (!env->v7m.secure) { |
| return 0; |
| } |
| return env->v7m.psplim[M_REG_NS]; |
| case 0x90: /* PRIMASK_NS */ |
| if (!env->v7m.secure) { |
| return 0; |
| } |
| return env->v7m.primask[M_REG_NS]; |
| case 0x91: /* BASEPRI_NS */ |
| if (!arm_feature(env, ARM_FEATURE_M_MAIN)) { |
| goto bad_reg; |
| } |
| if (!env->v7m.secure) { |
| return 0; |
| } |
| return env->v7m.basepri[M_REG_NS]; |
| case 0x93: /* FAULTMASK_NS */ |
| if (!arm_feature(env, ARM_FEATURE_M_MAIN)) { |
| goto bad_reg; |
| } |
| if (!env->v7m.secure) { |
| return 0; |
| } |
| return env->v7m.faultmask[M_REG_NS]; |
| case 0x98: /* SP_NS */ |
| { |
| /* |
| * This gives the non-secure SP selected based on whether we're |
| * currently in handler mode or not, using the NS CONTROL.SPSEL. |
| */ |
| bool spsel = env->v7m.control[M_REG_NS] & R_V7M_CONTROL_SPSEL_MASK; |
| |
| if (!env->v7m.secure) { |
| return 0; |
| } |
| if (!arm_v7m_is_handler_mode(env) && spsel) { |
| return env->v7m.other_ss_psp; |
| } else { |
| return env->v7m.other_ss_msp; |
| } |
| } |
| default: |
| break; |
| } |
| } |
| |
| switch (reg) { |
| case 8: /* MSP */ |
| return v7m_using_psp(env) ? env->v7m.other_sp : env->regs[13]; |
| case 9: /* PSP */ |
| return v7m_using_psp(env) ? env->regs[13] : env->v7m.other_sp; |
| case 10: /* MSPLIM */ |
| if (!arm_feature(env, ARM_FEATURE_V8)) { |
| goto bad_reg; |
| } |
| return env->v7m.msplim[env->v7m.secure]; |
| case 11: /* PSPLIM */ |
| if (!arm_feature(env, ARM_FEATURE_V8)) { |
| goto bad_reg; |
| } |
| return env->v7m.psplim[env->v7m.secure]; |
| case 16: /* PRIMASK */ |
| return env->v7m.primask[env->v7m.secure]; |
| case 17: /* BASEPRI */ |
| case 18: /* BASEPRI_MAX */ |
| if (!arm_feature(env, ARM_FEATURE_M_MAIN)) { |
| goto bad_reg; |
| } |
| return env->v7m.basepri[env->v7m.secure]; |
| case 19: /* FAULTMASK */ |
| if (!arm_feature(env, ARM_FEATURE_M_MAIN)) { |
| goto bad_reg; |
| } |
| return env->v7m.faultmask[env->v7m.secure]; |
| default: |
| bad_reg: |
| qemu_log_mask(LOG_GUEST_ERROR, "Attempt to read unknown special" |
| " register %d\n", reg); |
| return 0; |
| } |
| } |
| |
| void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) |
| { |
| /* |
| * We're passed bits [11..0] of the instruction; extract |
| * SYSm and the mask bits. |
| * Invalid combinations of SYSm and mask are UNPREDICTABLE; |
| * we choose to treat them as if the mask bits were valid. |
| * NB that the pseudocode 'mask' variable is bits [11..10], |
| * whereas ours is [11..8]. |
| */ |
| uint32_t mask = extract32(maskreg, 8, 4); |
| uint32_t reg = extract32(maskreg, 0, 8); |
| int cur_el = arm_current_el(env); |
| |
| if (cur_el == 0 && reg > 7 && reg != 20) { |
| /* |
| * only xPSR sub-fields and CONTROL.SFPA may be written by |
| * unprivileged code |
| */ |
| return; |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| switch (reg) { |
| case 0x88: /* MSP_NS */ |
| if (!env->v7m.secure) { |
| return; |
| } |
| env->v7m.other_ss_msp = val & ~3; |
| return; |
| case 0x89: /* PSP_NS */ |
| if (!env->v7m.secure) { |
| return; |
| } |
| env->v7m.other_ss_psp = val & ~3; |
| return; |
| case 0x8a: /* MSPLIM_NS */ |
| if (!env->v7m.secure) { |
| return; |
| } |
| env->v7m.msplim[M_REG_NS] = val & ~7; |
| return; |
| case 0x8b: /* PSPLIM_NS */ |
| if (!env->v7m.secure) { |
| return; |
| } |
| env->v7m.psplim[M_REG_NS] = val & ~7; |
| return; |
| case 0x90: /* PRIMASK_NS */ |
| if (!env->v7m.secure) { |
| return; |
| } |
| env->v7m.primask[M_REG_NS] = val & 1; |
| return; |
| case 0x91: /* BASEPRI_NS */ |
| if (!arm_feature(env, ARM_FEATURE_M_MAIN)) { |
| goto bad_reg; |
| } |
| if (!env->v7m.secure) { |
| return; |
| } |
| env->v7m.basepri[M_REG_NS] = val & 0xff; |
| return; |
| case 0x93: /* FAULTMASK_NS */ |
| if (!arm_feature(env, ARM_FEATURE_M_MAIN)) { |
| goto bad_reg; |
| } |
| if (!env->v7m.secure) { |
| return; |
| } |
| env->v7m.faultmask[M_REG_NS] = val & 1; |
| return; |
| case 0x94: /* CONTROL_NS */ |
| if (!env->v7m.secure) { |
| return; |
| } |
| write_v7m_control_spsel_for_secstate(env, |
| val & R_V7M_CONTROL_SPSEL_MASK, |
| M_REG_NS); |
| if (arm_feature(env, ARM_FEATURE_M_MAIN)) { |
| env->v7m.control[M_REG_NS] &= ~R_V7M_CONTROL_NPRIV_MASK; |
| env->v7m.control[M_REG_NS] |= val & R_V7M_CONTROL_NPRIV_MASK; |
| } |
| /* |
| * SFPA is RAZ/WI from NS. FPCA is RO if NSACR.CP10 == 0, |
| * RES0 if the FPU is not present, and is stored in the S bank |
| */ |
| if (cpu_isar_feature(aa32_vfp_simd, env_archcpu(env)) && |
| extract32(env->v7m.nsacr, 10, 1)) { |
| env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; |
| env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; |
| } |
| return; |
| case 0x98: /* SP_NS */ |
| { |
| /* |
| * This gives the non-secure SP selected based on whether we're |
| * currently in handler mode or not, using the NS CONTROL.SPSEL. |
| */ |
| bool spsel = env->v7m.control[M_REG_NS] & R_V7M_CONTROL_SPSEL_MASK; |
| bool is_psp = !arm_v7m_is_handler_mode(env) && spsel; |
| uint32_t limit; |
| |
| if (!env->v7m.secure) { |
| return; |
| } |
| |
| limit = is_psp ? env->v7m.psplim[false] : env->v7m.msplim[false]; |
| |
| val &= ~0x3; |
| |
| if (val < limit) { |
| raise_exception_ra(env, EXCP_STKOF, 0, 1, GETPC()); |
| } |
| |
| if (is_psp) { |
| env->v7m.other_ss_psp = val; |
| } else { |
| env->v7m.other_ss_msp = val; |
| } |
| return; |
| } |
| default: |
| break; |
| } |
| } |
| |
| switch (reg) { |
| case 0 ... 7: /* xPSR sub-fields */ |
| v7m_msr_xpsr(env, mask, reg, val); |
| break; |
| case 8: /* MSP */ |
| if (v7m_using_psp(env)) { |
| env->v7m.other_sp = val & ~3; |
| } else { |
| env->regs[13] = val & ~3; |
| } |
| break; |
| case 9: /* PSP */ |
| if (v7m_using_psp(env)) { |
| env->regs[13] = val & ~3; |
| } else { |
| env->v7m.other_sp = val & ~3; |
| } |
| break; |
| case 10: /* MSPLIM */ |
| if (!arm_feature(env, ARM_FEATURE_V8)) { |
| goto bad_reg; |
| } |
| env->v7m.msplim[env->v7m.secure] = val & ~7; |
| break; |
| case 11: /* PSPLIM */ |
| if (!arm_feature(env, ARM_FEATURE_V8)) { |
| goto bad_reg; |
| } |
| env->v7m.psplim[env->v7m.secure] = val & ~7; |
| break; |
| case 16: /* PRIMASK */ |
| env->v7m.primask[env->v7m.secure] = val & 1; |
| break; |
| case 17: /* BASEPRI */ |
| if (!arm_feature(env, ARM_FEATURE_M_MAIN)) { |
| goto bad_reg; |
| } |
| env->v7m.basepri[env->v7m.secure] = val & 0xff; |
| break; |
| case 18: /* BASEPRI_MAX */ |
| if (!arm_feature(env, ARM_FEATURE_M_MAIN)) { |
| goto bad_reg; |
| } |
| val &= 0xff; |
| if (val != 0 && (val < env->v7m.basepri[env->v7m.secure] |
| || env->v7m.basepri[env->v7m.secure] == 0)) { |
| env->v7m.basepri[env->v7m.secure] = val; |
| } |
| break; |
| case 19: /* FAULTMASK */ |
| if (!arm_feature(env, ARM_FEATURE_M_MAIN)) { |
| goto bad_reg; |
| } |
| env->v7m.faultmask[env->v7m.secure] = val & 1; |
| break; |
| case 20: /* CONTROL */ |
| /* |
| * Writing to the SPSEL bit only has an effect if we are in |
| * thread mode; other bits can be updated by any privileged code. |
| * write_v7m_control_spsel() deals with updating the SPSEL bit in |
| * env->v7m.control, so we only need update the others. |
| * For v7M, we must just ignore explicit writes to SPSEL in handler |
| * mode; for v8M the write is permitted but will have no effect. |
| * All these bits are writes-ignored from non-privileged code, |
| * except for SFPA. |
| */ |
| if (cur_el > 0 && (arm_feature(env, ARM_FEATURE_V8) || |
| !arm_v7m_is_handler_mode(env))) { |
| write_v7m_control_spsel(env, (val & R_V7M_CONTROL_SPSEL_MASK) != 0); |
| } |
| if (cur_el > 0 && arm_feature(env, ARM_FEATURE_M_MAIN)) { |
| env->v7m.control[env->v7m.secure] &= ~R_V7M_CONTROL_NPRIV_MASK; |
| env->v7m.control[env->v7m.secure] |= val & R_V7M_CONTROL_NPRIV_MASK; |
| } |
| if (cpu_isar_feature(aa32_vfp_simd, env_archcpu(env))) { |
| /* |
| * SFPA is RAZ/WI from NS or if no FPU. |
| * FPCA is RO if NSACR.CP10 == 0, RES0 if the FPU is not present. |
| * Both are stored in the S bank. |
| */ |
| if (env->v7m.secure) { |
| env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_SFPA_MASK; |
| env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_SFPA_MASK; |
| } |
| if (cur_el > 0 && |
| (env->v7m.secure || !arm_feature(env, ARM_FEATURE_M_SECURITY) || |
| extract32(env->v7m.nsacr, 10, 1))) { |
| env->v7m.control[M_REG_S] &= ~R_V7M_CONTROL_FPCA_MASK; |
| env->v7m.control[M_REG_S] |= val & R_V7M_CONTROL_FPCA_MASK; |
| } |
| } |
| break; |
| default: |
| bad_reg: |
| qemu_log_mask(LOG_GUEST_ERROR, "Attempt to write unknown special" |
| " register %d\n", reg); |
| return; |
| } |
| } |
| |
| uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) |
| { |
| /* Implement the TT instruction. op is bits [7:6] of the insn. */ |
| bool forceunpriv = op & 1; |
| bool alt = op & 2; |
| V8M_SAttributes sattrs = {}; |
| uint32_t tt_resp; |
| bool r, rw, nsr, nsrw, mrvalid; |
| ARMMMUIdx mmu_idx; |
| uint32_t mregion; |
| bool targetpriv; |
| bool targetsec = env->v7m.secure; |
| |
| /* |
| * Work out what the security state and privilege level we're |
| * interested in is... |
| */ |
| if (alt) { |
| targetsec = !targetsec; |
| } |
| |
| if (forceunpriv) { |
| targetpriv = false; |
| } else { |
| targetpriv = arm_v7m_is_handler_mode(env) || |
| !(env->v7m.control[targetsec] & R_V7M_CONTROL_NPRIV_MASK); |
| } |
| |
| /* ...and then figure out which MMU index this is */ |
| mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, targetsec, targetpriv); |
| |
| /* |
| * We know that the MPU and SAU don't care about the access type |
| * for our purposes beyond that we don't want to claim to be |
| * an insn fetch, so we arbitrarily call this a read. |
| */ |
| |
| /* |
| * MPU region info only available for privileged or if |
| * inspecting the other MPU state. |
| */ |
| if (arm_current_el(env) != 0 || alt) { |
| GetPhysAddrResult res = {}; |
| ARMMMUFaultInfo fi = {}; |
| |
| /* We can ignore the return value as prot is always set */ |
| pmsav8_mpu_lookup(env, addr, MMU_DATA_LOAD, mmu_idx, targetsec, |
| &res, &fi, &mregion); |
| if (mregion == -1) { |
| mrvalid = false; |
| mregion = 0; |
| } else { |
| mrvalid = true; |
| } |
| r = res.f.prot & PAGE_READ; |
| rw = res.f.prot & PAGE_WRITE; |
| } else { |
| r = false; |
| rw = false; |
| mrvalid = false; |
| mregion = 0; |
| } |
| |
| if (env->v7m.secure) { |
| v8m_security_lookup(env, addr, MMU_DATA_LOAD, mmu_idx, |
| targetsec, &sattrs); |
| nsr = sattrs.ns && r; |
| nsrw = sattrs.ns && rw; |
| } else { |
| sattrs.ns = true; |
| nsr = false; |
| nsrw = false; |
| } |
| |
| tt_resp = (sattrs.iregion << 24) | |
| (sattrs.irvalid << 23) | |
| ((!sattrs.ns) << 22) | |
| (nsrw << 21) | |
| (nsr << 20) | |
| (rw << 19) | |
| (r << 18) | |
| (sattrs.srvalid << 17) | |
| (mrvalid << 16) | |
| (sattrs.sregion << 8) | |
| mregion; |
| |
| return tt_resp; |
| } |
| |
| #endif /* !CONFIG_USER_ONLY */ |
| |
| uint32_t *arm_v7m_get_sp_ptr(CPUARMState *env, bool secure, bool threadmode, |
| bool spsel) |
| { |
| /* |
| * Return a pointer to the location where we currently store the |
| * stack pointer for the requested security state and thread mode. |
| * This pointer will become invalid if the CPU state is updated |
| * such that the stack pointers are switched around (eg changing |
| * the SPSEL control bit). |
| * Compare the v8M ARM ARM pseudocode LookUpSP_with_security_mode(). |
| * Unlike that pseudocode, we require the caller to pass us in the |
| * SPSEL control bit value; this is because we also use this |
| * function in handling of pushing of the callee-saves registers |
| * part of the v8M stack frame (pseudocode PushCalleeStack()), |
| * and in the tailchain codepath the SPSEL bit comes from the exception |
| * return magic LR value from the previous exception. The pseudocode |
| * opencodes the stack-selection in PushCalleeStack(), but we prefer |
| * to make this utility function generic enough to do the job. |
| */ |
| bool want_psp = threadmode && spsel; |
| |
| if (secure == env->v7m.secure) { |
| if (want_psp == v7m_using_psp(env)) { |
| return &env->regs[13]; |
| } else { |
| return &env->v7m.other_sp; |
| } |
| } else { |
| if (want_psp) { |
| return &env->v7m.other_ss_psp; |
| } else { |
| return &env->v7m.other_ss_msp; |
| } |
| } |
| } |