| Hyper-V Enlightenments |
| ====================== |
| |
| |
| Description |
| ----------- |
| |
| In some cases when implementing a hardware interface in software is slow, KVM |
| implements its own paravirtualized interfaces. This works well for Linux as |
| guest support for such features is added simultaneously with the feature itself. |
| It may, however, be hard-to-impossible to add support for these interfaces to |
| proprietary OSes, namely, Microsoft Windows. |
| |
| KVM on x86 implements Hyper-V Enlightenments for Windows guests. These features |
| make Windows and Hyper-V guests think they're running on top of a Hyper-V |
| compatible hypervisor and use Hyper-V specific features. |
| |
| |
| Setup |
| ----- |
| |
| No Hyper-V enlightenments are enabled by default by either KVM or QEMU. In |
| QEMU, individual enlightenments can be enabled through CPU flags, e.g: |
| |
| .. parsed-literal:: |
| |
| |qemu_system| --enable-kvm --cpu host,hv_relaxed,hv_vpindex,hv_time, ... |
| |
| Sometimes there are dependencies between enlightenments, QEMU is supposed to |
| check that the supplied configuration is sane. |
| |
| When any set of the Hyper-V enlightenments is enabled, QEMU changes hypervisor |
| identification (CPUID 0x40000000..0x4000000A) to Hyper-V. KVM identification |
| and features are kept in leaves 0x40000100..0x40000101. |
| |
| |
| Existing enlightenments |
| ----------------------- |
| |
| ``hv-relaxed`` |
| This feature tells guest OS to disable watchdog timeouts as it is running on a |
| hypervisor. It is known that some Windows versions will do this even when they |
| see 'hypervisor' CPU flag. |
| |
| ``hv-vapic`` |
| Provides so-called VP Assist page MSR to guest allowing it to work with APIC |
| more efficiently. In particular, this enlightenment allows paravirtualized |
| (exit-less) EOI processing. |
| |
| ``hv-spinlocks`` = xxx |
| Enables paravirtualized spinlocks. The parameter indicates how many times |
| spinlock acquisition should be attempted before indicating the situation to the |
| hypervisor. A special value 0xffffffff indicates "never notify". |
| |
| ``hv-vpindex`` |
| Provides HV_X64_MSR_VP_INDEX (0x40000002) MSR to the guest which has Virtual |
| processor index information. This enlightenment makes sense in conjunction with |
| hv-synic, hv-stimer and other enlightenments which require the guest to know its |
| Virtual Processor indices (e.g. when VP index needs to be passed in a |
| hypercall). |
| |
| ``hv-runtime`` |
| Provides HV_X64_MSR_VP_RUNTIME (0x40000010) MSR to the guest. The MSR keeps the |
| virtual processor run time in 100ns units. This gives guest operating system an |
| idea of how much time was 'stolen' from it (when the virtual CPU was preempted |
| to perform some other work). |
| |
| ``hv-crash`` |
| Provides HV_X64_MSR_CRASH_P0..HV_X64_MSR_CRASH_P5 (0x40000100..0x40000105) and |
| HV_X64_MSR_CRASH_CTL (0x40000105) MSRs to the guest. These MSRs are written to |
| by the guest when it crashes, HV_X64_MSR_CRASH_P0..HV_X64_MSR_CRASH_P5 MSRs |
| contain additional crash information. This information is outputted in QEMU log |
| and through QAPI. |
| Note: unlike under genuine Hyper-V, write to HV_X64_MSR_CRASH_CTL causes guest |
| to shutdown. This effectively blocks crash dump generation by Windows. |
| |
| ``hv-time`` |
| Enables two Hyper-V-specific clocksources available to the guest: MSR-based |
| Hyper-V clocksource (HV_X64_MSR_TIME_REF_COUNT, 0x40000020) and Reference TSC |
| page (enabled via MSR HV_X64_MSR_REFERENCE_TSC, 0x40000021). Both clocksources |
| are per-guest, Reference TSC page clocksource allows for exit-less time stamp |
| readings. Using this enlightenment leads to significant speedup of all timestamp |
| related operations. |
| |
| ``hv-synic`` |
| Enables Hyper-V Synthetic interrupt controller - an extension of a local APIC. |
| When enabled, this enlightenment provides additional communication facilities |
| to the guest: SynIC messages and Events. This is a pre-requisite for |
| implementing VMBus devices (not yet in QEMU). Additionally, this enlightenment |
| is needed to enable Hyper-V synthetic timers. SynIC is controlled through MSRs |
| HV_X64_MSR_SCONTROL..HV_X64_MSR_EOM (0x40000080..0x40000084) and |
| HV_X64_MSR_SINT0..HV_X64_MSR_SINT15 (0x40000090..0x4000009F) |
| |
| Requires: ``hv-vpindex`` |
| |
| ``hv-stimer`` |
| Enables Hyper-V synthetic timers. There are four synthetic timers per virtual |
| CPU controlled through HV_X64_MSR_STIMER0_CONFIG..HV_X64_MSR_STIMER3_COUNT |
| (0x400000B0..0x400000B7) MSRs. These timers can work either in single-shot or |
| periodic mode. It is known that certain Windows versions revert to using HPET |
| (or even RTC when HPET is unavailable) extensively when this enlightenment is |
| not provided; this can lead to significant CPU consumption, even when virtual |
| CPU is idle. |
| |
| Requires: ``hv-vpindex``, ``hv-synic``, ``hv-time`` |
| |
| ``hv-tlbflush`` |
| Enables paravirtualized TLB shoot-down mechanism. On x86 architecture, remote |
| TLB flush procedure requires sending IPIs and waiting for other CPUs to perform |
| local TLB flush. In virtualized environment some virtual CPUs may not even be |
| scheduled at the time of the call and may not require flushing (or, flushing |
| may be postponed until the virtual CPU is scheduled). hv-tlbflush enlightenment |
| implements TLB shoot-down through hypervisor enabling the optimization. |
| |
| Requires: ``hv-vpindex`` |
| |
| ``hv-ipi`` |
| Enables paravirtualized IPI send mechanism. HvCallSendSyntheticClusterIpi |
| hypercall may target more than 64 virtual CPUs simultaneously, doing the same |
| through APIC requires more than one access (and thus exit to the hypervisor). |
| |
| Requires: ``hv-vpindex`` |
| |
| ``hv-vendor-id`` = xxx |
| This changes Hyper-V identification in CPUID 0x40000000.EBX-EDX from the default |
| "Microsoft Hv". The parameter should be no longer than 12 characters. According |
| to the specification, guests shouldn't use this information and it is unknown |
| if there is a Windows version which acts differently. |
| Note: hv-vendor-id is not an enlightenment and thus doesn't enable Hyper-V |
| identification when specified without some other enlightenment. |
| |
| ``hv-reset`` |
| Provides HV_X64_MSR_RESET (0x40000003) MSR to the guest allowing it to reset |
| itself by writing to it. Even when this MSR is enabled, it is not a recommended |
| way for Windows to perform system reboot and thus it may not be used. |
| |
| ``hv-frequencies`` |
| Provides HV_X64_MSR_TSC_FREQUENCY (0x40000022) and HV_X64_MSR_APIC_FREQUENCY |
| (0x40000023) allowing the guest to get its TSC/APIC frequencies without doing |
| measurements. |
| |
| ``hv-reenlightenment`` |
| The enlightenment is nested specific, it targets Hyper-V on KVM guests. When |
| enabled, it provides HV_X64_MSR_REENLIGHTENMENT_CONTROL (0x40000106), |
| HV_X64_MSR_TSC_EMULATION_CONTROL (0x40000107)and HV_X64_MSR_TSC_EMULATION_STATUS |
| (0x40000108) MSRs allowing the guest to get notified when TSC frequency changes |
| (only happens on migration) and keep using old frequency (through emulation in |
| the hypervisor) until it is ready to switch to the new one. This, in conjunction |
| with ``hv-frequencies``, allows Hyper-V on KVM to pass stable clocksource |
| (Reference TSC page) to its own guests. |
| |
| Note, KVM doesn't fully support re-enlightenment notifications and doesn't |
| emulate TSC accesses after migration so 'tsc-frequency=' CPU option also has to |
| be specified to make migration succeed. The destination host has to either have |
| the same TSC frequency or support TSC scaling CPU feature. |
| |
| Recommended: ``hv-frequencies`` |
| |
| ``hv-evmcs`` |
| The enlightenment is nested specific, it targets Hyper-V on KVM guests. When |
| enabled, it provides Enlightened VMCS version 1 feature to the guest. The feature |
| implements paravirtualized protocol between L0 (KVM) and L1 (Hyper-V) |
| hypervisors making L2 exits to the hypervisor faster. The feature is Intel-only. |
| |
| Note: some virtualization features (e.g. Posted Interrupts) are disabled when |
| hv-evmcs is enabled. It may make sense to measure your nested workload with and |
| without the feature to find out if enabling it is beneficial. |
| |
| Requires: ``hv-vapic`` |
| |
| ``hv-stimer-direct`` |
| Hyper-V specification allows synthetic timer operation in two modes: "classic", |
| when expiration event is delivered as SynIC message and "direct", when the event |
| is delivered via normal interrupt. It is known that nested Hyper-V can only |
| use synthetic timers in direct mode and thus ``hv-stimer-direct`` needs to be |
| enabled. |
| |
| Requires: ``hv-vpindex``, ``hv-synic``, ``hv-time``, ``hv-stimer`` |
| |
| ``hv-avic`` (``hv-apicv``) |
| The enlightenment allows to use Hyper-V SynIC with hardware APICv/AVIC enabled. |
| Normally, Hyper-V SynIC disables these hardware feature and suggests the guest |
| to use paravirtualized AutoEOI feature. |
| Note: enabling this feature on old hardware (without APICv/AVIC support) may |
| have negative effect on guest's performance. |
| |
| ``hv-no-nonarch-coresharing`` = on/off/auto |
| This enlightenment tells guest OS that virtual processors will never share a |
| physical core unless they are reported as sibling SMT threads. This information |
| is required by Windows and Hyper-V guests to properly mitigate SMT related CPU |
| vulnerabilities. |
| |
| When the option is set to 'auto' QEMU will enable the feature only when KVM |
| reports that non-architectural coresharing is impossible, this means that |
| hyper-threading is not supported or completely disabled on the host. This |
| setting also prevents migration as SMT settings on the destination may differ. |
| When the option is set to 'on' QEMU will always enable the feature, regardless |
| of host setup. To keep guests secure, this can only be used in conjunction with |
| exposing correct vCPU topology and vCPU pinning. |
| |
| ``hv-version-id-build``, ``hv-version-id-major``, ``hv-version-id-minor``, ``hv-version-id-spack``, ``hv-version-id-sbranch``, ``hv-version-id-snumber`` |
| This changes Hyper-V version identification in CPUID 0x40000002.EAX-EDX from the |
| default (WS2016). |
| |
| - ``hv-version-id-build`` sets 'Build Number' (32 bits) |
| - ``hv-version-id-major`` sets 'Major Version' (16 bits) |
| - ``hv-version-id-minor`` sets 'Minor Version' (16 bits) |
| - ``hv-version-id-spack`` sets 'Service Pack' (32 bits) |
| - ``hv-version-id-sbranch`` sets 'Service Branch' (8 bits) |
| - ``hv-version-id-snumber`` sets 'Service Number' (24 bits) |
| |
| Note: hv-version-id-* are not enlightenments and thus don't enable Hyper-V |
| identification when specified without any other enlightenments. |
| |
| ``hv-syndbg`` |
| Enables Hyper-V synthetic debugger interface, this is a special interface used |
| by Windows Kernel debugger to send the packets through, rather than sending |
| them via serial/network . |
| When enabled, this enlightenment provides additional communication facilities |
| to the guest: SynDbg messages. |
| This new communication is used by Windows Kernel debugger rather than sending |
| packets via serial/network, adding significant performance boost over the other |
| comm channels. |
| This enlightenment requires a VMBus device (-device vmbus-bridge,irq=15). |
| |
| Requires: ``hv-relaxed``, ``hv_time``, ``hv-vapic``, ``hv-vpindex``, ``hv-synic``, ``hv-runtime``, ``hv-stimer`` |
| |
| ``hv-emsr-bitmap`` |
| The enlightenment is nested specific, it targets Hyper-V on KVM guests. When |
| enabled, it allows L0 (KVM) and L1 (Hyper-V) hypervisors to collaborate to |
| avoid unnecessary updates to L2 MSR-Bitmap upon vmexits. While the protocol is |
| supported for both VMX (Intel) and SVM (AMD), the VMX implementation requires |
| Enlightened VMCS (``hv-evmcs``) feature to also be enabled. |
| |
| Recommended: ``hv-evmcs`` (Intel) |
| |
| ``hv-xmm-input`` |
| Hyper-V specification allows to pass parameters for certain hypercalls using XMM |
| registers ("XMM Fast Hypercall Input"). When the feature is in use, it allows |
| for faster hypercalls processing as KVM can avoid reading guest's memory. |
| |
| ``hv-tlbflush-ext`` |
| Allow for extended GVA ranges to be passed to Hyper-V TLB flush hypercalls |
| (HvFlushVirtualAddressList/HvFlushVirtualAddressListEx). |
| |
| Requires: ``hv-tlbflush`` |
| |
| ``hv-tlbflush-direct`` |
| The enlightenment is nested specific, it targets Hyper-V on KVM guests. When |
| enabled, it allows L0 (KVM) to directly handle TLB flush hypercalls from L2 |
| guest without the need to exit to L1 (Hyper-V) hypervisor. While the feature is |
| supported for both VMX (Intel) and SVM (AMD), the VMX implementation requires |
| Enlightened VMCS (``hv-evmcs``) feature to also be enabled. |
| |
| Requires: ``hv-vapic`` |
| |
| Recommended: ``hv-evmcs`` (Intel) |
| |
| Supplementary features |
| ---------------------- |
| |
| ``hv-passthrough`` |
| In some cases (e.g. during development) it may make sense to use QEMU in |
| 'pass-through' mode and give Windows guests all enlightenments currently |
| supported by KVM. This pass-through mode is enabled by "hv-passthrough" CPU |
| flag. |
| |
| Note: ``hv-passthrough`` flag only enables enlightenments which are known to QEMU |
| (have corresponding 'hv-' flag) and copies ``hv-spinlocks`` and ``hv-vendor-id`` |
| values from KVM to QEMU. ``hv-passthrough`` overrides all other 'hv-' settings on |
| the command line. Also, enabling this flag effectively prevents migration as the |
| list of enabled enlightenments may differ between target and destination hosts. |
| |
| ``hv-enforce-cpuid`` |
| By default, KVM allows the guest to use all currently supported Hyper-V |
| enlightenments when Hyper-V CPUID interface was exposed, regardless of if |
| some features were not announced in guest visible CPUIDs. ``hv-enforce-cpuid`` |
| feature alters this behavior and only allows the guest to use exposed Hyper-V |
| enlightenments. |
| |
| |
| Useful links |
| ------------ |
| Hyper-V Top Level Functional specification and other information: |
| |
| - https://github.com/MicrosoftDocs/Virtualization-Documentation |
| - https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/tlfs/tlfs |
| |
