| /* |
| * System Register block model of Microsemi SmartFusion2. |
| * |
| * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| #include "hw/misc/msf2-sysreg.h" |
| #include "hw/qdev-properties.h" |
| #include "migration/vmstate.h" |
| #include "qemu/error-report.h" |
| #include "trace.h" |
| |
| static inline int msf2_divbits(uint32_t div) |
| { |
| int r = ctz32(div); |
| |
| return (div < 8) ? r : r + 1; |
| } |
| |
| static void msf2_sysreg_reset(DeviceState *d) |
| { |
| MSF2SysregState *s = MSF2_SYSREG(d); |
| |
| s->regs[MSSDDR_PLL_STATUS_LOW_CR] = 0x021A2358; |
| s->regs[MSSDDR_PLL_STATUS] = 0x3; |
| s->regs[MSSDDR_FACC1_CR] = msf2_divbits(s->apb0div) << 5 | |
| msf2_divbits(s->apb1div) << 2; |
| } |
| |
| static uint64_t msf2_sysreg_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| MSF2SysregState *s = opaque; |
| uint32_t ret = 0; |
| |
| offset >>= 2; |
| if (offset < ARRAY_SIZE(s->regs)) { |
| ret = s->regs[offset]; |
| trace_msf2_sysreg_read(offset << 2, ret); |
| } else { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: Bad offset 0x%08" HWADDR_PRIx "\n", __func__, |
| offset << 2); |
| } |
| |
| return ret; |
| } |
| |
| static void msf2_sysreg_write(void *opaque, hwaddr offset, |
| uint64_t val, unsigned size) |
| { |
| MSF2SysregState *s = opaque; |
| uint32_t newval = val; |
| |
| offset >>= 2; |
| |
| switch (offset) { |
| case MSSDDR_PLL_STATUS: |
| trace_msf2_sysreg_write_pll_status(); |
| break; |
| |
| case ESRAM_CR: |
| case DDR_CR: |
| case ENVM_REMAP_BASE_CR: |
| if (newval != s->regs[offset]) { |
| qemu_log_mask(LOG_UNIMP, |
| TYPE_MSF2_SYSREG": remapping not supported\n"); |
| } |
| break; |
| |
| default: |
| if (offset < ARRAY_SIZE(s->regs)) { |
| trace_msf2_sysreg_write(offset << 2, newval, s->regs[offset]); |
| s->regs[offset] = newval; |
| } else { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: Bad offset 0x%08" HWADDR_PRIx "\n", __func__, |
| offset << 2); |
| } |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps sysreg_ops = { |
| .read = msf2_sysreg_read, |
| .write = msf2_sysreg_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void msf2_sysreg_init(Object *obj) |
| { |
| MSF2SysregState *s = MSF2_SYSREG(obj); |
| |
| memory_region_init_io(&s->iomem, obj, &sysreg_ops, s, TYPE_MSF2_SYSREG, |
| MSF2_SYSREG_MMIO_SIZE); |
| sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); |
| } |
| |
| static const VMStateDescription vmstate_msf2_sysreg = { |
| .name = TYPE_MSF2_SYSREG, |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_UINT32_ARRAY(regs, MSF2SysregState, MSF2_SYSREG_MMIO_SIZE / 4), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static Property msf2_sysreg_properties[] = { |
| /* default divisors in Libero GUI */ |
| DEFINE_PROP_UINT8("apb0divisor", MSF2SysregState, apb0div, 2), |
| DEFINE_PROP_UINT8("apb1divisor", MSF2SysregState, apb1div, 2), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void msf2_sysreg_realize(DeviceState *dev, Error **errp) |
| { |
| MSF2SysregState *s = MSF2_SYSREG(dev); |
| |
| if ((s->apb0div > 32 || !is_power_of_2(s->apb0div)) |
| || (s->apb1div > 32 || !is_power_of_2(s->apb1div))) { |
| error_setg(errp, "Invalid apb divisor value"); |
| error_append_hint(errp, "apb divisor must be a power of 2" |
| " and maximum value is 32\n"); |
| } |
| } |
| |
| static void msf2_sysreg_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->vmsd = &vmstate_msf2_sysreg; |
| device_class_set_legacy_reset(dc, msf2_sysreg_reset); |
| device_class_set_props(dc, msf2_sysreg_properties); |
| dc->realize = msf2_sysreg_realize; |
| } |
| |
| static const TypeInfo msf2_sysreg_info = { |
| .name = TYPE_MSF2_SYSREG, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .class_init = msf2_sysreg_class_init, |
| .instance_size = sizeof(MSF2SysregState), |
| .instance_init = msf2_sysreg_init, |
| }; |
| |
| static void msf2_sysreg_register_types(void) |
| { |
| type_register_static(&msf2_sysreg_info); |
| } |
| |
| type_init(msf2_sysreg_register_types) |