| /* |
| * Virtio Block Device |
| * |
| * Copyright IBM, Corp. 2007 |
| * |
| * Authors: |
| * Anthony Liguori <aliguori@us.ibm.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. See |
| * the COPYING file in the top-level directory. |
| * |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/defer-call.h" |
| #include "qapi/error.h" |
| #include "qemu/iov.h" |
| #include "qemu/module.h" |
| #include "qemu/error-report.h" |
| #include "qemu/main-loop.h" |
| #include "block/block_int.h" |
| #include "trace.h" |
| #include "hw/block/block.h" |
| #include "hw/qdev-properties.h" |
| #include "sysemu/blockdev.h" |
| #include "sysemu/block-ram-registrar.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/runstate.h" |
| #include "hw/virtio/virtio-blk.h" |
| #include "scsi/constants.h" |
| #ifdef __linux__ |
| # include <scsi/sg.h> |
| #endif |
| #include "hw/virtio/virtio-bus.h" |
| #include "migration/qemu-file-types.h" |
| #include "hw/virtio/virtio-access.h" |
| #include "hw/virtio/virtio-blk-common.h" |
| #include "qemu/coroutine.h" |
| |
| static void virtio_blk_ioeventfd_attach(VirtIOBlock *s); |
| |
| static void virtio_blk_init_request(VirtIOBlock *s, VirtQueue *vq, |
| VirtIOBlockReq *req) |
| { |
| req->dev = s; |
| req->vq = vq; |
| req->qiov.size = 0; |
| req->in_len = 0; |
| req->next = NULL; |
| req->mr_next = NULL; |
| } |
| |
| static void virtio_blk_free_request(VirtIOBlockReq *req) |
| { |
| g_free(req); |
| } |
| |
| static void virtio_blk_req_complete(VirtIOBlockReq *req, unsigned char status) |
| { |
| VirtIOBlock *s = req->dev; |
| VirtIODevice *vdev = VIRTIO_DEVICE(s); |
| |
| trace_virtio_blk_req_complete(vdev, req, status); |
| |
| stb_p(&req->in->status, status); |
| iov_discard_undo(&req->inhdr_undo); |
| iov_discard_undo(&req->outhdr_undo); |
| virtqueue_push(req->vq, &req->elem, req->in_len); |
| if (qemu_in_iothread()) { |
| virtio_notify_irqfd(vdev, req->vq); |
| } else { |
| virtio_notify(vdev, req->vq); |
| } |
| } |
| |
| static int virtio_blk_handle_rw_error(VirtIOBlockReq *req, int error, |
| bool is_read, bool acct_failed) |
| { |
| VirtIOBlock *s = req->dev; |
| BlockErrorAction action = blk_get_error_action(s->blk, is_read, error); |
| |
| if (action == BLOCK_ERROR_ACTION_STOP) { |
| /* Break the link as the next request is going to be parsed from the |
| * ring again. Otherwise we may end up doing a double completion! */ |
| req->mr_next = NULL; |
| |
| WITH_QEMU_LOCK_GUARD(&s->rq_lock) { |
| req->next = s->rq; |
| s->rq = req; |
| } |
| } else if (action == BLOCK_ERROR_ACTION_REPORT) { |
| virtio_blk_req_complete(req, VIRTIO_BLK_S_IOERR); |
| if (acct_failed) { |
| block_acct_failed(blk_get_stats(s->blk), &req->acct); |
| } |
| virtio_blk_free_request(req); |
| } |
| |
| blk_error_action(s->blk, action, is_read, error); |
| return action != BLOCK_ERROR_ACTION_IGNORE; |
| } |
| |
| static void virtio_blk_rw_complete(void *opaque, int ret) |
| { |
| VirtIOBlockReq *next = opaque; |
| VirtIOBlock *s = next->dev; |
| VirtIODevice *vdev = VIRTIO_DEVICE(s); |
| |
| while (next) { |
| VirtIOBlockReq *req = next; |
| next = req->mr_next; |
| trace_virtio_blk_rw_complete(vdev, req, ret); |
| |
| if (req->qiov.nalloc != -1) { |
| /* If nalloc is != -1 req->qiov is a local copy of the original |
| * external iovec. It was allocated in submit_requests to be |
| * able to merge requests. */ |
| qemu_iovec_destroy(&req->qiov); |
| } |
| |
| if (ret) { |
| int p = virtio_ldl_p(VIRTIO_DEVICE(s), &req->out.type); |
| bool is_read = !(p & VIRTIO_BLK_T_OUT); |
| /* Note that memory may be dirtied on read failure. If the |
| * virtio request is not completed here, as is the case for |
| * BLOCK_ERROR_ACTION_STOP, the memory may not be copied |
| * correctly during live migration. While this is ugly, |
| * it is acceptable because the device is free to write to |
| * the memory until the request is completed (which will |
| * happen on the other side of the migration). |
| */ |
| if (virtio_blk_handle_rw_error(req, -ret, is_read, true)) { |
| continue; |
| } |
| } |
| |
| virtio_blk_req_complete(req, VIRTIO_BLK_S_OK); |
| block_acct_done(blk_get_stats(s->blk), &req->acct); |
| virtio_blk_free_request(req); |
| } |
| } |
| |
| static void virtio_blk_flush_complete(void *opaque, int ret) |
| { |
| VirtIOBlockReq *req = opaque; |
| VirtIOBlock *s = req->dev; |
| |
| if (ret && virtio_blk_handle_rw_error(req, -ret, 0, true)) { |
| return; |
| } |
| |
| virtio_blk_req_complete(req, VIRTIO_BLK_S_OK); |
| block_acct_done(blk_get_stats(s->blk), &req->acct); |
| virtio_blk_free_request(req); |
| } |
| |
| static void virtio_blk_discard_write_zeroes_complete(void *opaque, int ret) |
| { |
| VirtIOBlockReq *req = opaque; |
| VirtIOBlock *s = req->dev; |
| bool is_write_zeroes = (virtio_ldl_p(VIRTIO_DEVICE(s), &req->out.type) & |
| ~VIRTIO_BLK_T_BARRIER) == VIRTIO_BLK_T_WRITE_ZEROES; |
| |
| if (ret && virtio_blk_handle_rw_error(req, -ret, false, is_write_zeroes)) { |
| return; |
| } |
| |
| virtio_blk_req_complete(req, VIRTIO_BLK_S_OK); |
| if (is_write_zeroes) { |
| block_acct_done(blk_get_stats(s->blk), &req->acct); |
| } |
| virtio_blk_free_request(req); |
| } |
| |
| static VirtIOBlockReq *virtio_blk_get_request(VirtIOBlock *s, VirtQueue *vq) |
| { |
| VirtIOBlockReq *req = virtqueue_pop(vq, sizeof(VirtIOBlockReq)); |
| |
| if (req) { |
| virtio_blk_init_request(s, vq, req); |
| } |
| return req; |
| } |
| |
| static void virtio_blk_handle_scsi(VirtIOBlockReq *req) |
| { |
| int status; |
| struct virtio_scsi_inhdr *scsi; |
| VirtIOBlock *blk = req->dev; |
| VirtIODevice *vdev = VIRTIO_DEVICE(blk); |
| VirtQueueElement *elem = &req->elem; |
| |
| /* |
| * We require at least one output segment each for the virtio_blk_outhdr |
| * and the SCSI command block. |
| * |
| * We also at least require the virtio_blk_inhdr, the virtio_scsi_inhdr |
| * and the sense buffer pointer in the input segments. |
| */ |
| if (elem->out_num < 2 || elem->in_num < 3) { |
| status = VIRTIO_BLK_S_IOERR; |
| goto fail; |
| } |
| |
| /* |
| * The scsi inhdr is placed in the second-to-last input segment, just |
| * before the regular inhdr. |
| * |
| * Just put anything nonzero so that the ioctl fails in the guest. |
| */ |
| scsi = (void *)elem->in_sg[elem->in_num - 2].iov_base; |
| virtio_stl_p(vdev, &scsi->errors, 255); |
| status = VIRTIO_BLK_S_UNSUPP; |
| |
| fail: |
| virtio_blk_req_complete(req, status); |
| virtio_blk_free_request(req); |
| } |
| |
| static inline void submit_requests(VirtIOBlock *s, MultiReqBuffer *mrb, |
| int start, int num_reqs, int niov) |
| { |
| BlockBackend *blk = s->blk; |
| QEMUIOVector *qiov = &mrb->reqs[start]->qiov; |
| int64_t sector_num = mrb->reqs[start]->sector_num; |
| bool is_write = mrb->is_write; |
| BdrvRequestFlags flags = 0; |
| |
| if (num_reqs > 1) { |
| int i; |
| struct iovec *tmp_iov = qiov->iov; |
| int tmp_niov = qiov->niov; |
| |
| /* mrb->reqs[start]->qiov was initialized from external so we can't |
| * modify it here. We need to initialize it locally and then add the |
| * external iovecs. */ |
| qemu_iovec_init(qiov, niov); |
| |
| for (i = 0; i < tmp_niov; i++) { |
| qemu_iovec_add(qiov, tmp_iov[i].iov_base, tmp_iov[i].iov_len); |
| } |
| |
| for (i = start + 1; i < start + num_reqs; i++) { |
| qemu_iovec_concat(qiov, &mrb->reqs[i]->qiov, 0, |
| mrb->reqs[i]->qiov.size); |
| mrb->reqs[i - 1]->mr_next = mrb->reqs[i]; |
| } |
| |
| trace_virtio_blk_submit_multireq(VIRTIO_DEVICE(mrb->reqs[start]->dev), |
| mrb, start, num_reqs, |
| sector_num << BDRV_SECTOR_BITS, |
| qiov->size, is_write); |
| block_acct_merge_done(blk_get_stats(blk), |
| is_write ? BLOCK_ACCT_WRITE : BLOCK_ACCT_READ, |
| num_reqs - 1); |
| } |
| |
| if (blk_ram_registrar_ok(&s->blk_ram_registrar)) { |
| flags |= BDRV_REQ_REGISTERED_BUF; |
| } |
| |
| if (is_write) { |
| blk_aio_pwritev(blk, sector_num << BDRV_SECTOR_BITS, qiov, |
| flags, virtio_blk_rw_complete, |
| mrb->reqs[start]); |
| } else { |
| blk_aio_preadv(blk, sector_num << BDRV_SECTOR_BITS, qiov, |
| flags, virtio_blk_rw_complete, |
| mrb->reqs[start]); |
| } |
| } |
| |
| static int multireq_compare(const void *a, const void *b) |
| { |
| const VirtIOBlockReq *req1 = *(VirtIOBlockReq **)a, |
| *req2 = *(VirtIOBlockReq **)b; |
| |
| /* |
| * Note that we can't simply subtract sector_num1 from sector_num2 |
| * here as that could overflow the return value. |
| */ |
| if (req1->sector_num > req2->sector_num) { |
| return 1; |
| } else if (req1->sector_num < req2->sector_num) { |
| return -1; |
| } else { |
| return 0; |
| } |
| } |
| |
| static void virtio_blk_submit_multireq(VirtIOBlock *s, MultiReqBuffer *mrb) |
| { |
| int i = 0, start = 0, num_reqs = 0, niov = 0, nb_sectors = 0; |
| uint32_t max_transfer; |
| int64_t sector_num = 0; |
| |
| if (mrb->num_reqs == 1) { |
| submit_requests(s, mrb, 0, 1, -1); |
| mrb->num_reqs = 0; |
| return; |
| } |
| |
| max_transfer = blk_get_max_transfer(mrb->reqs[0]->dev->blk); |
| |
| qsort(mrb->reqs, mrb->num_reqs, sizeof(*mrb->reqs), |
| &multireq_compare); |
| |
| for (i = 0; i < mrb->num_reqs; i++) { |
| VirtIOBlockReq *req = mrb->reqs[i]; |
| if (num_reqs > 0) { |
| /* |
| * NOTE: We cannot merge the requests in below situations: |
| * 1. requests are not sequential |
| * 2. merge would exceed maximum number of IOVs |
| * 3. merge would exceed maximum transfer length of backend device |
| */ |
| if (sector_num + nb_sectors != req->sector_num || |
| niov > blk_get_max_iov(s->blk) - req->qiov.niov || |
| req->qiov.size > max_transfer || |
| nb_sectors > (max_transfer - |
| req->qiov.size) / BDRV_SECTOR_SIZE) { |
| submit_requests(s, mrb, start, num_reqs, niov); |
| num_reqs = 0; |
| } |
| } |
| |
| if (num_reqs == 0) { |
| sector_num = req->sector_num; |
| nb_sectors = niov = 0; |
| start = i; |
| } |
| |
| nb_sectors += req->qiov.size / BDRV_SECTOR_SIZE; |
| niov += req->qiov.niov; |
| num_reqs++; |
| } |
| |
| submit_requests(s, mrb, start, num_reqs, niov); |
| mrb->num_reqs = 0; |
| } |
| |
| static void virtio_blk_handle_flush(VirtIOBlockReq *req, MultiReqBuffer *mrb) |
| { |
| VirtIOBlock *s = req->dev; |
| |
| block_acct_start(blk_get_stats(s->blk), &req->acct, 0, |
| BLOCK_ACCT_FLUSH); |
| |
| /* |
| * Make sure all outstanding writes are posted to the backing device. |
| */ |
| if (mrb->is_write && mrb->num_reqs > 0) { |
| virtio_blk_submit_multireq(s, mrb); |
| } |
| blk_aio_flush(s->blk, virtio_blk_flush_complete, req); |
| } |
| |
| static bool virtio_blk_sect_range_ok(VirtIOBlock *dev, |
| uint64_t sector, size_t size) |
| { |
| uint64_t nb_sectors = size >> BDRV_SECTOR_BITS; |
| uint64_t total_sectors; |
| |
| if (nb_sectors > BDRV_REQUEST_MAX_SECTORS) { |
| return false; |
| } |
| if (sector & dev->sector_mask) { |
| return false; |
| } |
| if (size % dev->conf.conf.logical_block_size) { |
| return false; |
| } |
| blk_get_geometry(dev->blk, &total_sectors); |
| if (sector > total_sectors || nb_sectors > total_sectors - sector) { |
| return false; |
| } |
| return true; |
| } |
| |
| static uint8_t virtio_blk_handle_discard_write_zeroes(VirtIOBlockReq *req, |
| struct virtio_blk_discard_write_zeroes *dwz_hdr, bool is_write_zeroes) |
| { |
| VirtIOBlock *s = req->dev; |
| VirtIODevice *vdev = VIRTIO_DEVICE(s); |
| uint64_t sector; |
| uint32_t num_sectors, flags, max_sectors; |
| uint8_t err_status; |
| int bytes; |
| |
| sector = virtio_ldq_p(vdev, &dwz_hdr->sector); |
| num_sectors = virtio_ldl_p(vdev, &dwz_hdr->num_sectors); |
| flags = virtio_ldl_p(vdev, &dwz_hdr->flags); |
| max_sectors = is_write_zeroes ? s->conf.max_write_zeroes_sectors : |
| s->conf.max_discard_sectors; |
| |
| /* |
| * max_sectors is at most BDRV_REQUEST_MAX_SECTORS, this check |
| * make us sure that "num_sectors << BDRV_SECTOR_BITS" can fit in |
| * the integer variable. |
| */ |
| if (unlikely(num_sectors > max_sectors)) { |
| err_status = VIRTIO_BLK_S_IOERR; |
| goto err; |
| } |
| |
| bytes = num_sectors << BDRV_SECTOR_BITS; |
| |
| if (unlikely(!virtio_blk_sect_range_ok(s, sector, bytes))) { |
| err_status = VIRTIO_BLK_S_IOERR; |
| goto err; |
| } |
| |
| /* |
| * The device MUST set the status byte to VIRTIO_BLK_S_UNSUPP for discard |
| * and write zeroes commands if any unknown flag is set. |
| */ |
| if (unlikely(flags & ~VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP)) { |
| err_status = VIRTIO_BLK_S_UNSUPP; |
| goto err; |
| } |
| |
| if (is_write_zeroes) { /* VIRTIO_BLK_T_WRITE_ZEROES */ |
| int blk_aio_flags = 0; |
| |
| if (flags & VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP) { |
| blk_aio_flags |= BDRV_REQ_MAY_UNMAP; |
| } |
| |
| block_acct_start(blk_get_stats(s->blk), &req->acct, bytes, |
| BLOCK_ACCT_WRITE); |
| |
| blk_aio_pwrite_zeroes(s->blk, sector << BDRV_SECTOR_BITS, |
| bytes, blk_aio_flags, |
| virtio_blk_discard_write_zeroes_complete, req); |
| } else { /* VIRTIO_BLK_T_DISCARD */ |
| /* |
| * The device MUST set the status byte to VIRTIO_BLK_S_UNSUPP for |
| * discard commands if the unmap flag is set. |
| */ |
| if (unlikely(flags & VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP)) { |
| err_status = VIRTIO_BLK_S_UNSUPP; |
| goto err; |
| } |
| |
| blk_aio_pdiscard(s->blk, sector << BDRV_SECTOR_BITS, bytes, |
| virtio_blk_discard_write_zeroes_complete, req); |
| } |
| |
| return VIRTIO_BLK_S_OK; |
| |
| err: |
| if (is_write_zeroes) { |
| block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_WRITE); |
| } |
| return err_status; |
| } |
| |
| typedef struct ZoneCmdData { |
| VirtIOBlockReq *req; |
| struct iovec *in_iov; |
| unsigned in_num; |
| union { |
| struct { |
| unsigned int nr_zones; |
| BlockZoneDescriptor *zones; |
| } zone_report_data; |
| struct { |
| int64_t offset; |
| } zone_append_data; |
| }; |
| } ZoneCmdData; |
| |
| /* |
| * check zoned_request: error checking before issuing requests. If all checks |
| * passed, return true. |
| * append: true if only zone append requests issued. |
| */ |
| static bool check_zoned_request(VirtIOBlock *s, int64_t offset, int64_t len, |
| bool append, uint8_t *status) { |
| BlockDriverState *bs = blk_bs(s->blk); |
| int index; |
| |
| if (!virtio_has_feature(s->host_features, VIRTIO_BLK_F_ZONED)) { |
| *status = VIRTIO_BLK_S_UNSUPP; |
| return false; |
| } |
| |
| if (offset < 0 || len < 0 || len > (bs->total_sectors << BDRV_SECTOR_BITS) |
| || offset > (bs->total_sectors << BDRV_SECTOR_BITS) - len) { |
| *status = VIRTIO_BLK_S_ZONE_INVALID_CMD; |
| return false; |
| } |
| |
| if (append) { |
| if (bs->bl.write_granularity) { |
| if ((offset % bs->bl.write_granularity) != 0) { |
| *status = VIRTIO_BLK_S_ZONE_UNALIGNED_WP; |
| return false; |
| } |
| } |
| |
| index = offset / bs->bl.zone_size; |
| if (BDRV_ZT_IS_CONV(bs->wps->wp[index])) { |
| *status = VIRTIO_BLK_S_ZONE_INVALID_CMD; |
| return false; |
| } |
| |
| if (len / 512 > bs->bl.max_append_sectors) { |
| if (bs->bl.max_append_sectors == 0) { |
| *status = VIRTIO_BLK_S_UNSUPP; |
| } else { |
| *status = VIRTIO_BLK_S_ZONE_INVALID_CMD; |
| } |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| static void virtio_blk_zone_report_complete(void *opaque, int ret) |
| { |
| ZoneCmdData *data = opaque; |
| VirtIOBlockReq *req = data->req; |
| VirtIODevice *vdev = VIRTIO_DEVICE(req->dev); |
| struct iovec *in_iov = data->in_iov; |
| unsigned in_num = data->in_num; |
| int64_t zrp_size, n, j = 0; |
| int64_t nz = data->zone_report_data.nr_zones; |
| int8_t err_status = VIRTIO_BLK_S_OK; |
| struct virtio_blk_zone_report zrp_hdr = (struct virtio_blk_zone_report) { |
| .nr_zones = cpu_to_le64(nz), |
| }; |
| |
| trace_virtio_blk_zone_report_complete(vdev, req, nz, ret); |
| if (ret) { |
| err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD; |
| goto out; |
| } |
| |
| zrp_size = sizeof(struct virtio_blk_zone_report) |
| + sizeof(struct virtio_blk_zone_descriptor) * nz; |
| n = iov_from_buf(in_iov, in_num, 0, &zrp_hdr, sizeof(zrp_hdr)); |
| if (n != sizeof(zrp_hdr)) { |
| virtio_error(vdev, "Driver provided input buffer that is too small!"); |
| err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD; |
| goto out; |
| } |
| |
| for (size_t i = sizeof(zrp_hdr); i < zrp_size; |
| i += sizeof(struct virtio_blk_zone_descriptor), ++j) { |
| struct virtio_blk_zone_descriptor desc = |
| (struct virtio_blk_zone_descriptor) { |
| .z_start = cpu_to_le64(data->zone_report_data.zones[j].start |
| >> BDRV_SECTOR_BITS), |
| .z_cap = cpu_to_le64(data->zone_report_data.zones[j].cap |
| >> BDRV_SECTOR_BITS), |
| .z_wp = cpu_to_le64(data->zone_report_data.zones[j].wp |
| >> BDRV_SECTOR_BITS), |
| }; |
| |
| switch (data->zone_report_data.zones[j].type) { |
| case BLK_ZT_CONV: |
| desc.z_type = VIRTIO_BLK_ZT_CONV; |
| break; |
| case BLK_ZT_SWR: |
| desc.z_type = VIRTIO_BLK_ZT_SWR; |
| break; |
| case BLK_ZT_SWP: |
| desc.z_type = VIRTIO_BLK_ZT_SWP; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| switch (data->zone_report_data.zones[j].state) { |
| case BLK_ZS_RDONLY: |
| desc.z_state = VIRTIO_BLK_ZS_RDONLY; |
| break; |
| case BLK_ZS_OFFLINE: |
| desc.z_state = VIRTIO_BLK_ZS_OFFLINE; |
| break; |
| case BLK_ZS_EMPTY: |
| desc.z_state = VIRTIO_BLK_ZS_EMPTY; |
| break; |
| case BLK_ZS_CLOSED: |
| desc.z_state = VIRTIO_BLK_ZS_CLOSED; |
| break; |
| case BLK_ZS_FULL: |
| desc.z_state = VIRTIO_BLK_ZS_FULL; |
| break; |
| case BLK_ZS_EOPEN: |
| desc.z_state = VIRTIO_BLK_ZS_EOPEN; |
| break; |
| case BLK_ZS_IOPEN: |
| desc.z_state = VIRTIO_BLK_ZS_IOPEN; |
| break; |
| case BLK_ZS_NOT_WP: |
| desc.z_state = VIRTIO_BLK_ZS_NOT_WP; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| /* TODO: it takes O(n^2) time complexity. Optimizations required. */ |
| n = iov_from_buf(in_iov, in_num, i, &desc, sizeof(desc)); |
| if (n != sizeof(desc)) { |
| virtio_error(vdev, "Driver provided input buffer " |
| "for descriptors that is too small!"); |
| err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD; |
| } |
| } |
| |
| out: |
| virtio_blk_req_complete(req, err_status); |
| virtio_blk_free_request(req); |
| g_free(data->zone_report_data.zones); |
| g_free(data); |
| } |
| |
| static void virtio_blk_handle_zone_report(VirtIOBlockReq *req, |
| struct iovec *in_iov, |
| unsigned in_num) |
| { |
| VirtIOBlock *s = req->dev; |
| VirtIODevice *vdev = VIRTIO_DEVICE(s); |
| unsigned int nr_zones; |
| ZoneCmdData *data; |
| int64_t zone_size, offset; |
| uint8_t err_status; |
| |
| if (req->in_len < sizeof(struct virtio_blk_inhdr) + |
| sizeof(struct virtio_blk_zone_report) + |
| sizeof(struct virtio_blk_zone_descriptor)) { |
| virtio_error(vdev, "in buffer too small for zone report"); |
| err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD; |
| goto out; |
| } |
| |
| /* start byte offset of the zone report */ |
| offset = virtio_ldq_p(vdev, &req->out.sector) << BDRV_SECTOR_BITS; |
| if (!check_zoned_request(s, offset, 0, false, &err_status)) { |
| goto out; |
| } |
| nr_zones = (req->in_len - sizeof(struct virtio_blk_inhdr) - |
| sizeof(struct virtio_blk_zone_report)) / |
| sizeof(struct virtio_blk_zone_descriptor); |
| trace_virtio_blk_handle_zone_report(vdev, req, |
| offset >> BDRV_SECTOR_BITS, nr_zones); |
| |
| zone_size = sizeof(BlockZoneDescriptor) * nr_zones; |
| data = g_malloc(sizeof(ZoneCmdData)); |
| data->req = req; |
| data->in_iov = in_iov; |
| data->in_num = in_num; |
| data->zone_report_data.nr_zones = nr_zones; |
| data->zone_report_data.zones = g_malloc(zone_size), |
| |
| blk_aio_zone_report(s->blk, offset, &data->zone_report_data.nr_zones, |
| data->zone_report_data.zones, |
| virtio_blk_zone_report_complete, data); |
| return; |
| out: |
| virtio_blk_req_complete(req, err_status); |
| virtio_blk_free_request(req); |
| } |
| |
| static void virtio_blk_zone_mgmt_complete(void *opaque, int ret) |
| { |
| VirtIOBlockReq *req = opaque; |
| VirtIOBlock *s = req->dev; |
| VirtIODevice *vdev = VIRTIO_DEVICE(s); |
| int8_t err_status = VIRTIO_BLK_S_OK; |
| trace_virtio_blk_zone_mgmt_complete(vdev, req,ret); |
| |
| if (ret) { |
| err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD; |
| } |
| |
| virtio_blk_req_complete(req, err_status); |
| virtio_blk_free_request(req); |
| } |
| |
| static int virtio_blk_handle_zone_mgmt(VirtIOBlockReq *req, BlockZoneOp op) |
| { |
| VirtIOBlock *s = req->dev; |
| VirtIODevice *vdev = VIRTIO_DEVICE(s); |
| BlockDriverState *bs = blk_bs(s->blk); |
| int64_t offset = virtio_ldq_p(vdev, &req->out.sector) << BDRV_SECTOR_BITS; |
| uint64_t len; |
| uint64_t capacity = bs->total_sectors << BDRV_SECTOR_BITS; |
| uint8_t err_status = VIRTIO_BLK_S_OK; |
| |
| uint32_t type = virtio_ldl_p(vdev, &req->out.type); |
| if (type == VIRTIO_BLK_T_ZONE_RESET_ALL) { |
| /* Entire drive capacity */ |
| offset = 0; |
| len = capacity; |
| trace_virtio_blk_handle_zone_reset_all(vdev, req, 0, |
| bs->total_sectors); |
| } else { |
| if (bs->bl.zone_size > capacity - offset) { |
| /* The zoned device allows the last smaller zone. */ |
| len = capacity - bs->bl.zone_size * (bs->bl.nr_zones - 1ull); |
| } else { |
| len = bs->bl.zone_size; |
| } |
| trace_virtio_blk_handle_zone_mgmt(vdev, req, op, |
| offset >> BDRV_SECTOR_BITS, |
| len >> BDRV_SECTOR_BITS); |
| } |
| |
| if (!check_zoned_request(s, offset, len, false, &err_status)) { |
| goto out; |
| } |
| |
| blk_aio_zone_mgmt(s->blk, op, offset, len, |
| virtio_blk_zone_mgmt_complete, req); |
| |
| return 0; |
| out: |
| virtio_blk_req_complete(req, err_status); |
| virtio_blk_free_request(req); |
| return err_status; |
| } |
| |
| static void virtio_blk_zone_append_complete(void *opaque, int ret) |
| { |
| ZoneCmdData *data = opaque; |
| VirtIOBlockReq *req = data->req; |
| VirtIODevice *vdev = VIRTIO_DEVICE(req->dev); |
| int64_t append_sector, n; |
| uint8_t err_status = VIRTIO_BLK_S_OK; |
| |
| if (ret) { |
| err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD; |
| goto out; |
| } |
| |
| virtio_stq_p(vdev, &append_sector, |
| data->zone_append_data.offset >> BDRV_SECTOR_BITS); |
| n = iov_from_buf(data->in_iov, data->in_num, 0, &append_sector, |
| sizeof(append_sector)); |
| if (n != sizeof(append_sector)) { |
| virtio_error(vdev, "Driver provided input buffer less than size of " |
| "append_sector"); |
| err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD; |
| goto out; |
| } |
| trace_virtio_blk_zone_append_complete(vdev, req, append_sector, ret); |
| |
| out: |
| virtio_blk_req_complete(req, err_status); |
| virtio_blk_free_request(req); |
| g_free(data); |
| } |
| |
| static int virtio_blk_handle_zone_append(VirtIOBlockReq *req, |
| struct iovec *out_iov, |
| struct iovec *in_iov, |
| uint64_t out_num, |
| unsigned in_num) { |
| VirtIOBlock *s = req->dev; |
| VirtIODevice *vdev = VIRTIO_DEVICE(s); |
| uint8_t err_status = VIRTIO_BLK_S_OK; |
| |
| int64_t offset = virtio_ldq_p(vdev, &req->out.sector) << BDRV_SECTOR_BITS; |
| int64_t len = iov_size(out_iov, out_num); |
| ZoneCmdData *data; |
| |
| trace_virtio_blk_handle_zone_append(vdev, req, offset >> BDRV_SECTOR_BITS); |
| if (!check_zoned_request(s, offset, len, true, &err_status)) { |
| goto out; |
| } |
| |
| data = g_malloc(sizeof(ZoneCmdData)); |
| data->req = req; |
| data->in_iov = in_iov; |
| data->in_num = in_num; |
| data->zone_append_data.offset = offset; |
| qemu_iovec_init_external(&req->qiov, out_iov, out_num); |
| |
| block_acct_start(blk_get_stats(s->blk), &req->acct, len, |
| BLOCK_ACCT_ZONE_APPEND); |
| |
| blk_aio_zone_append(s->blk, &data->zone_append_data.offset, &req->qiov, 0, |
| virtio_blk_zone_append_complete, data); |
| return 0; |
| |
| out: |
| virtio_blk_req_complete(req, err_status); |
| virtio_blk_free_request(req); |
| return err_status; |
| } |
| |
| static int virtio_blk_handle_request(VirtIOBlockReq *req, MultiReqBuffer *mrb) |
| { |
| uint32_t type; |
| struct iovec *in_iov = req->elem.in_sg; |
| struct iovec *out_iov = req->elem.out_sg; |
| unsigned in_num = req->elem.in_num; |
| unsigned out_num = req->elem.out_num; |
| VirtIOBlock *s = req->dev; |
| VirtIODevice *vdev = VIRTIO_DEVICE(s); |
| |
| if (req->elem.out_num < 1 || req->elem.in_num < 1) { |
| virtio_error(vdev, "virtio-blk missing headers"); |
| return -1; |
| } |
| |
| if (unlikely(iov_to_buf(out_iov, out_num, 0, &req->out, |
| sizeof(req->out)) != sizeof(req->out))) { |
| virtio_error(vdev, "virtio-blk request outhdr too short"); |
| return -1; |
| } |
| |
| iov_discard_front_undoable(&out_iov, &out_num, sizeof(req->out), |
| &req->outhdr_undo); |
| |
| if (in_iov[in_num - 1].iov_len < sizeof(struct virtio_blk_inhdr)) { |
| virtio_error(vdev, "virtio-blk request inhdr too short"); |
| iov_discard_undo(&req->outhdr_undo); |
| return -1; |
| } |
| |
| /* We always touch the last byte, so just see how big in_iov is. */ |
| req->in_len = iov_size(in_iov, in_num); |
| req->in = (void *)in_iov[in_num - 1].iov_base |
| + in_iov[in_num - 1].iov_len |
| - sizeof(struct virtio_blk_inhdr); |
| iov_discard_back_undoable(in_iov, &in_num, sizeof(struct virtio_blk_inhdr), |
| &req->inhdr_undo); |
| |
| type = virtio_ldl_p(vdev, &req->out.type); |
| |
| /* VIRTIO_BLK_T_OUT defines the command direction. VIRTIO_BLK_T_BARRIER |
| * is an optional flag. Although a guest should not send this flag if |
| * not negotiated we ignored it in the past. So keep ignoring it. */ |
| switch (type & ~(VIRTIO_BLK_T_OUT | VIRTIO_BLK_T_BARRIER)) { |
| case VIRTIO_BLK_T_IN: |
| { |
| bool is_write = type & VIRTIO_BLK_T_OUT; |
| req->sector_num = virtio_ldq_p(vdev, &req->out.sector); |
| |
| if (is_write) { |
| qemu_iovec_init_external(&req->qiov, out_iov, out_num); |
| trace_virtio_blk_handle_write(vdev, req, req->sector_num, |
| req->qiov.size / BDRV_SECTOR_SIZE); |
| } else { |
| qemu_iovec_init_external(&req->qiov, in_iov, in_num); |
| trace_virtio_blk_handle_read(vdev, req, req->sector_num, |
| req->qiov.size / BDRV_SECTOR_SIZE); |
| } |
| |
| if (!virtio_blk_sect_range_ok(s, req->sector_num, req->qiov.size)) { |
| virtio_blk_req_complete(req, VIRTIO_BLK_S_IOERR); |
| block_acct_invalid(blk_get_stats(s->blk), |
| is_write ? BLOCK_ACCT_WRITE : BLOCK_ACCT_READ); |
| virtio_blk_free_request(req); |
| return 0; |
| } |
| |
| block_acct_start(blk_get_stats(s->blk), &req->acct, req->qiov.size, |
| is_write ? BLOCK_ACCT_WRITE : BLOCK_ACCT_READ); |
| |
| /* merge would exceed maximum number of requests or IO direction |
| * changes */ |
| if (mrb->num_reqs > 0 && (mrb->num_reqs == VIRTIO_BLK_MAX_MERGE_REQS || |
| is_write != mrb->is_write || |
| !s->conf.request_merging)) { |
| virtio_blk_submit_multireq(s, mrb); |
| } |
| |
| assert(mrb->num_reqs < VIRTIO_BLK_MAX_MERGE_REQS); |
| mrb->reqs[mrb->num_reqs++] = req; |
| mrb->is_write = is_write; |
| break; |
| } |
| case VIRTIO_BLK_T_FLUSH: |
| virtio_blk_handle_flush(req, mrb); |
| break; |
| case VIRTIO_BLK_T_ZONE_REPORT: |
| virtio_blk_handle_zone_report(req, in_iov, in_num); |
| break; |
| case VIRTIO_BLK_T_ZONE_OPEN: |
| virtio_blk_handle_zone_mgmt(req, BLK_ZO_OPEN); |
| break; |
| case VIRTIO_BLK_T_ZONE_CLOSE: |
| virtio_blk_handle_zone_mgmt(req, BLK_ZO_CLOSE); |
| break; |
| case VIRTIO_BLK_T_ZONE_FINISH: |
| virtio_blk_handle_zone_mgmt(req, BLK_ZO_FINISH); |
| break; |
| case VIRTIO_BLK_T_ZONE_RESET: |
| virtio_blk_handle_zone_mgmt(req, BLK_ZO_RESET); |
| break; |
| case VIRTIO_BLK_T_ZONE_RESET_ALL: |
| virtio_blk_handle_zone_mgmt(req, BLK_ZO_RESET); |
| break; |
| case VIRTIO_BLK_T_SCSI_CMD: |
| virtio_blk_handle_scsi(req); |
| break; |
| case VIRTIO_BLK_T_GET_ID: |
| { |
| /* |
| * NB: per existing s/n string convention the string is |
| * terminated by '\0' only when shorter than buffer. |
| */ |
| const char *serial = s->conf.serial ? s->conf.serial : ""; |
| size_t size = MIN(strlen(serial) + 1, |
| MIN(iov_size(in_iov, in_num), |
| VIRTIO_BLK_ID_BYTES)); |
| iov_from_buf(in_iov, in_num, 0, serial, size); |
| virtio_blk_req_complete(req, VIRTIO_BLK_S_OK); |
| virtio_blk_free_request(req); |
| break; |
| } |
| case VIRTIO_BLK_T_ZONE_APPEND & ~VIRTIO_BLK_T_OUT: |
| /* |
| * Passing out_iov/out_num and in_iov/in_num is not safe |
| * to access req->elem.out_sg directly because it may be |
| * modified by virtio_blk_handle_request(). |
| */ |
| virtio_blk_handle_zone_append(req, out_iov, in_iov, out_num, in_num); |
| break; |
| /* |
| * VIRTIO_BLK_T_DISCARD and VIRTIO_BLK_T_WRITE_ZEROES are defined with |
| * VIRTIO_BLK_T_OUT flag set. We masked this flag in the switch statement, |
| * so we must mask it for these requests, then we will check if it is set. |
| */ |
| case VIRTIO_BLK_T_DISCARD & ~VIRTIO_BLK_T_OUT: |
| case VIRTIO_BLK_T_WRITE_ZEROES & ~VIRTIO_BLK_T_OUT: |
| { |
| struct virtio_blk_discard_write_zeroes dwz_hdr; |
| size_t out_len = iov_size(out_iov, out_num); |
| bool is_write_zeroes = (type & ~VIRTIO_BLK_T_BARRIER) == |
| VIRTIO_BLK_T_WRITE_ZEROES; |
| uint8_t err_status; |
| |
| /* |
| * Unsupported if VIRTIO_BLK_T_OUT is not set or the request contains |
| * more than one segment. |
| */ |
| if (unlikely(!(type & VIRTIO_BLK_T_OUT) || |
| out_len > sizeof(dwz_hdr))) { |
| virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP); |
| virtio_blk_free_request(req); |
| return 0; |
| } |
| |
| if (unlikely(iov_to_buf(out_iov, out_num, 0, &dwz_hdr, |
| sizeof(dwz_hdr)) != sizeof(dwz_hdr))) { |
| iov_discard_undo(&req->inhdr_undo); |
| iov_discard_undo(&req->outhdr_undo); |
| virtio_error(vdev, "virtio-blk discard/write_zeroes header" |
| " too short"); |
| return -1; |
| } |
| |
| err_status = virtio_blk_handle_discard_write_zeroes(req, &dwz_hdr, |
| is_write_zeroes); |
| if (err_status != VIRTIO_BLK_S_OK) { |
| virtio_blk_req_complete(req, err_status); |
| virtio_blk_free_request(req); |
| } |
| |
| break; |
| } |
| default: |
| virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP); |
| virtio_blk_free_request(req); |
| } |
| return 0; |
| } |
| |
| void virtio_blk_handle_vq(VirtIOBlock *s, VirtQueue *vq) |
| { |
| VirtIOBlockReq *req; |
| MultiReqBuffer mrb = {}; |
| bool suppress_notifications = virtio_queue_get_notification(vq); |
| |
| defer_call_begin(); |
| |
| do { |
| if (suppress_notifications) { |
| virtio_queue_set_notification(vq, 0); |
| } |
| |
| while ((req = virtio_blk_get_request(s, vq))) { |
| if (virtio_blk_handle_request(req, &mrb)) { |
| virtqueue_detach_element(req->vq, &req->elem, 0); |
| virtio_blk_free_request(req); |
| break; |
| } |
| } |
| |
| if (suppress_notifications) { |
| virtio_queue_set_notification(vq, 1); |
| } |
| } while (!virtio_queue_empty(vq)); |
| |
| if (mrb.num_reqs) { |
| virtio_blk_submit_multireq(s, &mrb); |
| } |
| |
| defer_call_end(); |
| } |
| |
| static void virtio_blk_handle_output(VirtIODevice *vdev, VirtQueue *vq) |
| { |
| VirtIOBlock *s = (VirtIOBlock *)vdev; |
| |
| if (!s->ioeventfd_disabled && !s->ioeventfd_started) { |
| /* Some guests kick before setting VIRTIO_CONFIG_S_DRIVER_OK so start |
| * ioeventfd here instead of waiting for .set_status(). |
| */ |
| virtio_device_start_ioeventfd(vdev); |
| if (!s->ioeventfd_disabled) { |
| return; |
| } |
| } |
| |
| virtio_blk_handle_vq(s, vq); |
| } |
| |
| static void virtio_blk_dma_restart_bh(void *opaque) |
| { |
| VirtIOBlockReq *req = opaque; |
| VirtIOBlock *s = req->dev; /* we're called with at least one request */ |
| |
| MultiReqBuffer mrb = {}; |
| |
| while (req) { |
| VirtIOBlockReq *next = req->next; |
| if (virtio_blk_handle_request(req, &mrb)) { |
| /* Device is now broken and won't do any processing until it gets |
| * reset. Already queued requests will be lost: let's purge them. |
| */ |
| while (req) { |
| next = req->next; |
| virtqueue_detach_element(req->vq, &req->elem, 0); |
| virtio_blk_free_request(req); |
| req = next; |
| } |
| break; |
| } |
| req = next; |
| } |
| |
| if (mrb.num_reqs) { |
| virtio_blk_submit_multireq(s, &mrb); |
| } |
| |
| /* Paired with inc in virtio_blk_dma_restart_cb() */ |
| blk_dec_in_flight(s->conf.conf.blk); |
| } |
| |
| static void virtio_blk_dma_restart_cb(void *opaque, bool running, |
| RunState state) |
| { |
| VirtIOBlock *s = opaque; |
| uint16_t num_queues = s->conf.num_queues; |
| g_autofree VirtIOBlockReq **vq_rq = NULL; |
| VirtIOBlockReq *rq; |
| |
| if (!running) { |
| return; |
| } |
| |
| /* Split the device-wide s->rq request list into per-vq request lists */ |
| vq_rq = g_new0(VirtIOBlockReq *, num_queues); |
| |
| WITH_QEMU_LOCK_GUARD(&s->rq_lock) { |
| rq = s->rq; |
| s->rq = NULL; |
| } |
| |
| while (rq) { |
| VirtIOBlockReq *next = rq->next; |
| uint16_t idx = virtio_get_queue_index(rq->vq); |
| |
| /* Only num_queues vqs were created so vq_rq[idx] is within bounds */ |
| assert(idx < num_queues); |
| rq->next = vq_rq[idx]; |
| vq_rq[idx] = rq; |
| rq = next; |
| } |
| |
| /* Schedule a BH to submit the requests in each vq's AioContext */ |
| for (uint16_t i = 0; i < num_queues; i++) { |
| if (!vq_rq[i]) { |
| continue; |
| } |
| |
| /* Paired with dec in virtio_blk_dma_restart_bh() */ |
| blk_inc_in_flight(s->conf.conf.blk); |
| |
| aio_bh_schedule_oneshot(s->vq_aio_context[i], |
| virtio_blk_dma_restart_bh, |
| vq_rq[i]); |
| } |
| } |
| |
| static void virtio_blk_reset(VirtIODevice *vdev) |
| { |
| VirtIOBlock *s = VIRTIO_BLK(vdev); |
| VirtIOBlockReq *req; |
| |
| /* Dataplane has stopped... */ |
| assert(!s->ioeventfd_started); |
| |
| /* ...but requests may still be in flight. */ |
| blk_drain(s->blk); |
| |
| /* We drop queued requests after blk_drain() because blk_drain() itself can |
| * produce them. */ |
| WITH_QEMU_LOCK_GUARD(&s->rq_lock) { |
| while (s->rq) { |
| req = s->rq; |
| s->rq = req->next; |
| |
| /* No other threads can access req->vq here */ |
| virtqueue_detach_element(req->vq, &req->elem, 0); |
| |
| virtio_blk_free_request(req); |
| } |
| } |
| |
| blk_set_enable_write_cache(s->blk, s->original_wce); |
| } |
| |
| /* coalesce internal state, copy to pci i/o region 0 |
| */ |
| static void virtio_blk_update_config(VirtIODevice *vdev, uint8_t *config) |
| { |
| VirtIOBlock *s = VIRTIO_BLK(vdev); |
| BlockConf *conf = &s->conf.conf; |
| BlockDriverState *bs = blk_bs(s->blk); |
| struct virtio_blk_config blkcfg; |
| uint64_t capacity; |
| int64_t length; |
| int blk_size = conf->logical_block_size; |
| |
| blk_get_geometry(s->blk, &capacity); |
| memset(&blkcfg, 0, sizeof(blkcfg)); |
| virtio_stq_p(vdev, &blkcfg.capacity, capacity); |
| virtio_stl_p(vdev, &blkcfg.seg_max, |
| s->conf.seg_max_adjust ? s->conf.queue_size - 2 : 128 - 2); |
| virtio_stw_p(vdev, &blkcfg.geometry.cylinders, conf->cyls); |
| virtio_stl_p(vdev, &blkcfg.blk_size, blk_size); |
| virtio_stw_p(vdev, &blkcfg.min_io_size, conf->min_io_size / blk_size); |
| virtio_stl_p(vdev, &blkcfg.opt_io_size, conf->opt_io_size / blk_size); |
| blkcfg.geometry.heads = conf->heads; |
| /* |
| * We must ensure that the block device capacity is a multiple of |
| * the logical block size. If that is not the case, let's use |
| * sector_mask to adopt the geometry to have a correct picture. |
| * For those devices where the capacity is ok for the given geometry |
| * we don't touch the sector value of the geometry, since some devices |
| * (like s390 dasd) need a specific value. Here the capacity is already |
| * cyls*heads*secs*blk_size and the sector value is not block size |
| * divided by 512 - instead it is the amount of blk_size blocks |
| * per track (cylinder). |
| */ |
| length = blk_getlength(s->blk); |
| if (length > 0 && length / conf->heads / conf->secs % blk_size) { |
| blkcfg.geometry.sectors = conf->secs & ~s->sector_mask; |
| } else { |
| blkcfg.geometry.sectors = conf->secs; |
| } |
| blkcfg.size_max = 0; |
| blkcfg.physical_block_exp = get_physical_block_exp(conf); |
| blkcfg.alignment_offset = 0; |
| blkcfg.wce = blk_enable_write_cache(s->blk); |
| virtio_stw_p(vdev, &blkcfg.num_queues, s->conf.num_queues); |
| if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_DISCARD)) { |
| uint32_t discard_granularity = conf->discard_granularity; |
| if (discard_granularity == -1 || !s->conf.report_discard_granularity) { |
| discard_granularity = blk_size; |
| } |
| virtio_stl_p(vdev, &blkcfg.max_discard_sectors, |
| s->conf.max_discard_sectors); |
| virtio_stl_p(vdev, &blkcfg.discard_sector_alignment, |
| discard_granularity >> BDRV_SECTOR_BITS); |
| /* |
| * We support only one segment per request since multiple segments |
| * are not widely used and there are no userspace APIs that allow |
| * applications to submit multiple segments in a single call. |
| */ |
| virtio_stl_p(vdev, &blkcfg.max_discard_seg, 1); |
| } |
| if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_WRITE_ZEROES)) { |
| virtio_stl_p(vdev, &blkcfg.max_write_zeroes_sectors, |
| s->conf.max_write_zeroes_sectors); |
| blkcfg.write_zeroes_may_unmap = 1; |
| virtio_stl_p(vdev, &blkcfg.max_write_zeroes_seg, 1); |
| } |
| if (bs->bl.zoned != BLK_Z_NONE) { |
| switch (bs->bl.zoned) { |
| case BLK_Z_HM: |
| blkcfg.zoned.model = VIRTIO_BLK_Z_HM; |
| break; |
| case BLK_Z_HA: |
| blkcfg.zoned.model = VIRTIO_BLK_Z_HA; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| virtio_stl_p(vdev, &blkcfg.zoned.zone_sectors, |
| bs->bl.zone_size / 512); |
| virtio_stl_p(vdev, &blkcfg.zoned.max_active_zones, |
| bs->bl.max_active_zones); |
| virtio_stl_p(vdev, &blkcfg.zoned.max_open_zones, |
| bs->bl.max_open_zones); |
| virtio_stl_p(vdev, &blkcfg.zoned.write_granularity, blk_size); |
| virtio_stl_p(vdev, &blkcfg.zoned.max_append_sectors, |
| bs->bl.max_append_sectors); |
| } else { |
| blkcfg.zoned.model = VIRTIO_BLK_Z_NONE; |
| } |
| memcpy(config, &blkcfg, s->config_size); |
| } |
| |
| static void virtio_blk_set_config(VirtIODevice *vdev, const uint8_t *config) |
| { |
| VirtIOBlock *s = VIRTIO_BLK(vdev); |
| struct virtio_blk_config blkcfg; |
| |
| memcpy(&blkcfg, config, s->config_size); |
| |
| blk_set_enable_write_cache(s->blk, blkcfg.wce != 0); |
| } |
| |
| static uint64_t virtio_blk_get_features(VirtIODevice *vdev, uint64_t features, |
| Error **errp) |
| { |
| VirtIOBlock *s = VIRTIO_BLK(vdev); |
| |
| /* Firstly sync all virtio-blk possible supported features */ |
| features |= s->host_features; |
| |
| virtio_add_feature(&features, VIRTIO_BLK_F_SEG_MAX); |
| virtio_add_feature(&features, VIRTIO_BLK_F_GEOMETRY); |
| virtio_add_feature(&features, VIRTIO_BLK_F_TOPOLOGY); |
| virtio_add_feature(&features, VIRTIO_BLK_F_BLK_SIZE); |
| if (!virtio_has_feature(features, VIRTIO_F_VERSION_1)) { |
| virtio_clear_feature(&features, VIRTIO_F_ANY_LAYOUT); |
| /* Added for historical reasons, removing it could break migration. */ |
| virtio_add_feature(&features, VIRTIO_BLK_F_SCSI); |
| } |
| |
| if (blk_enable_write_cache(s->blk) || |
| (s->conf.x_enable_wce_if_config_wce && |
| virtio_has_feature(features, VIRTIO_BLK_F_CONFIG_WCE))) { |
| virtio_add_feature(&features, VIRTIO_BLK_F_WCE); |
| } |
| if (!blk_is_writable(s->blk)) { |
| virtio_add_feature(&features, VIRTIO_BLK_F_RO); |
| } |
| if (s->conf.num_queues > 1) { |
| virtio_add_feature(&features, VIRTIO_BLK_F_MQ); |
| } |
| |
| return features; |
| } |
| |
| static void virtio_blk_set_status(VirtIODevice *vdev, uint8_t status) |
| { |
| VirtIOBlock *s = VIRTIO_BLK(vdev); |
| |
| if (!(status & (VIRTIO_CONFIG_S_DRIVER | VIRTIO_CONFIG_S_DRIVER_OK))) { |
| assert(!s->ioeventfd_started); |
| } |
| |
| if (!(status & VIRTIO_CONFIG_S_DRIVER_OK)) { |
| return; |
| } |
| |
| /* A guest that supports VIRTIO_BLK_F_CONFIG_WCE must be able to send |
| * cache flushes. Thus, the "auto writethrough" behavior is never |
| * necessary for guests that support the VIRTIO_BLK_F_CONFIG_WCE feature. |
| * Leaving it enabled would break the following sequence: |
| * |
| * Guest started with "-drive cache=writethrough" |
| * Guest sets status to 0 |
| * Guest sets DRIVER bit in status field |
| * Guest reads host features (WCE=0, CONFIG_WCE=1) |
| * Guest writes guest features (WCE=0, CONFIG_WCE=1) |
| * Guest writes 1 to the WCE configuration field (writeback mode) |
| * Guest sets DRIVER_OK bit in status field |
| * |
| * s->blk would erroneously be placed in writethrough mode. |
| */ |
| if (!virtio_vdev_has_feature(vdev, VIRTIO_BLK_F_CONFIG_WCE)) { |
| blk_set_enable_write_cache(s->blk, |
| virtio_vdev_has_feature(vdev, |
| VIRTIO_BLK_F_WCE)); |
| } |
| } |
| |
| static void virtio_blk_save_device(VirtIODevice *vdev, QEMUFile *f) |
| { |
| VirtIOBlock *s = VIRTIO_BLK(vdev); |
| |
| WITH_QEMU_LOCK_GUARD(&s->rq_lock) { |
| VirtIOBlockReq *req = s->rq; |
| |
| while (req) { |
| qemu_put_sbyte(f, 1); |
| |
| if (s->conf.num_queues > 1) { |
| qemu_put_be32(f, virtio_get_queue_index(req->vq)); |
| } |
| |
| qemu_put_virtqueue_element(vdev, f, &req->elem); |
| req = req->next; |
| } |
| } |
| |
| qemu_put_sbyte(f, 0); |
| } |
| |
| static int virtio_blk_load_device(VirtIODevice *vdev, QEMUFile *f, |
| int version_id) |
| { |
| VirtIOBlock *s = VIRTIO_BLK(vdev); |
| |
| while (qemu_get_sbyte(f)) { |
| unsigned nvqs = s->conf.num_queues; |
| unsigned vq_idx = 0; |
| VirtIOBlockReq *req; |
| |
| if (nvqs > 1) { |
| vq_idx = qemu_get_be32(f); |
| |
| if (vq_idx >= nvqs) { |
| error_report("Invalid virtqueue index in request list: %#x", |
| vq_idx); |
| return -EINVAL; |
| } |
| } |
| |
| req = qemu_get_virtqueue_element(vdev, f, sizeof(VirtIOBlockReq)); |
| virtio_blk_init_request(s, virtio_get_queue(vdev, vq_idx), req); |
| |
| WITH_QEMU_LOCK_GUARD(&s->rq_lock) { |
| req->next = s->rq; |
| s->rq = req; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void virtio_resize_cb(void *opaque) |
| { |
| VirtIODevice *vdev = opaque; |
| |
| assert(qemu_get_current_aio_context() == qemu_get_aio_context()); |
| virtio_notify_config(vdev); |
| } |
| |
| static void virtio_blk_resize(void *opaque) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(opaque); |
| |
| /* |
| * virtio_notify_config() needs to acquire the BQL, |
| * so it can't be called from an iothread. Instead, schedule |
| * it to be run in the main context BH. |
| */ |
| aio_bh_schedule_oneshot(qemu_get_aio_context(), virtio_resize_cb, vdev); |
| } |
| |
| static void virtio_blk_ioeventfd_detach(VirtIOBlock *s) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(s); |
| |
| for (uint16_t i = 0; i < s->conf.num_queues; i++) { |
| VirtQueue *vq = virtio_get_queue(vdev, i); |
| virtio_queue_aio_detach_host_notifier(vq, s->vq_aio_context[i]); |
| } |
| } |
| |
| static void virtio_blk_ioeventfd_attach(VirtIOBlock *s) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(s); |
| |
| for (uint16_t i = 0; i < s->conf.num_queues; i++) { |
| VirtQueue *vq = virtio_get_queue(vdev, i); |
| virtio_queue_aio_attach_host_notifier(vq, s->vq_aio_context[i]); |
| } |
| } |
| |
| /* Suspend virtqueue ioeventfd processing during drain */ |
| static void virtio_blk_drained_begin(void *opaque) |
| { |
| VirtIOBlock *s = opaque; |
| |
| if (s->ioeventfd_started) { |
| virtio_blk_ioeventfd_detach(s); |
| } |
| } |
| |
| /* Resume virtqueue ioeventfd processing after drain */ |
| static void virtio_blk_drained_end(void *opaque) |
| { |
| VirtIOBlock *s = opaque; |
| |
| if (s->ioeventfd_started) { |
| virtio_blk_ioeventfd_attach(s); |
| } |
| } |
| |
| static const BlockDevOps virtio_block_ops = { |
| .resize_cb = virtio_blk_resize, |
| .drained_begin = virtio_blk_drained_begin, |
| .drained_end = virtio_blk_drained_end, |
| }; |
| |
| static bool |
| validate_iothread_vq_mapping_list(IOThreadVirtQueueMappingList *list, |
| uint16_t num_queues, Error **errp) |
| { |
| g_autofree unsigned long *vqs = bitmap_new(num_queues); |
| g_autoptr(GHashTable) iothreads = |
| g_hash_table_new(g_str_hash, g_str_equal); |
| |
| for (IOThreadVirtQueueMappingList *node = list; node; node = node->next) { |
| const char *name = node->value->iothread; |
| uint16List *vq; |
| |
| if (!iothread_by_id(name)) { |
| error_setg(errp, "IOThread \"%s\" object does not exist", name); |
| return false; |
| } |
| |
| if (!g_hash_table_add(iothreads, (gpointer)name)) { |
| error_setg(errp, |
| "duplicate IOThread name \"%s\" in iothread-vq-mapping", |
| name); |
| return false; |
| } |
| |
| if (node != list) { |
| if (!!node->value->vqs != !!list->value->vqs) { |
| error_setg(errp, "either all items in iothread-vq-mapping " |
| "must have vqs or none of them must have it"); |
| return false; |
| } |
| } |
| |
| for (vq = node->value->vqs; vq; vq = vq->next) { |
| if (vq->value >= num_queues) { |
| error_setg(errp, "vq index %u for IOThread \"%s\" must be " |
| "less than num_queues %u in iothread-vq-mapping", |
| vq->value, name, num_queues); |
| return false; |
| } |
| |
| if (test_and_set_bit(vq->value, vqs)) { |
| error_setg(errp, "cannot assign vq %u to IOThread \"%s\" " |
| "because it is already assigned", vq->value, name); |
| return false; |
| } |
| } |
| } |
| |
| if (list->value->vqs) { |
| for (uint16_t i = 0; i < num_queues; i++) { |
| if (!test_bit(i, vqs)) { |
| error_setg(errp, |
| "missing vq %u IOThread assignment in iothread-vq-mapping", |
| i); |
| return false; |
| } |
| } |
| } |
| |
| return true; |
| } |
| |
| /** |
| * apply_iothread_vq_mapping: |
| * @iothread_vq_mapping_list: The mapping of virtqueues to IOThreads. |
| * @vq_aio_context: The array of AioContext pointers to fill in. |
| * @num_queues: The length of @vq_aio_context. |
| * @errp: If an error occurs, a pointer to the area to store the error. |
| * |
| * Fill in the AioContext for each virtqueue in the @vq_aio_context array given |
| * the iothread-vq-mapping parameter in @iothread_vq_mapping_list. |
| * |
| * Returns: %true on success, %false on failure. |
| **/ |
| static bool apply_iothread_vq_mapping( |
| IOThreadVirtQueueMappingList *iothread_vq_mapping_list, |
| AioContext **vq_aio_context, |
| uint16_t num_queues, |
| Error **errp) |
| { |
| IOThreadVirtQueueMappingList *node; |
| size_t num_iothreads = 0; |
| size_t cur_iothread = 0; |
| |
| if (!validate_iothread_vq_mapping_list(iothread_vq_mapping_list, |
| num_queues, errp)) { |
| return false; |
| } |
| |
| for (node = iothread_vq_mapping_list; node; node = node->next) { |
| num_iothreads++; |
| } |
| |
| for (node = iothread_vq_mapping_list; node; node = node->next) { |
| IOThread *iothread = iothread_by_id(node->value->iothread); |
| AioContext *ctx = iothread_get_aio_context(iothread); |
| |
| /* Released in virtio_blk_vq_aio_context_cleanup() */ |
| object_ref(OBJECT(iothread)); |
| |
| if (node->value->vqs) { |
| uint16List *vq; |
| |
| /* Explicit vq:IOThread assignment */ |
| for (vq = node->value->vqs; vq; vq = vq->next) { |
| assert(vq->value < num_queues); |
| vq_aio_context[vq->value] = ctx; |
| } |
| } else { |
| /* Round-robin vq:IOThread assignment */ |
| for (unsigned i = cur_iothread; i < num_queues; |
| i += num_iothreads) { |
| vq_aio_context[i] = ctx; |
| } |
| } |
| |
| cur_iothread++; |
| } |
| |
| return true; |
| } |
| |
| /* Context: BQL held */ |
| static bool virtio_blk_vq_aio_context_init(VirtIOBlock *s, Error **errp) |
| { |
| ERRP_GUARD(); |
| VirtIODevice *vdev = VIRTIO_DEVICE(s); |
| VirtIOBlkConf *conf = &s->conf; |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| |
| if (conf->iothread && conf->iothread_vq_mapping_list) { |
| error_setg(errp, |
| "iothread and iothread-vq-mapping properties cannot be set " |
| "at the same time"); |
| return false; |
| } |
| |
| if (conf->iothread || conf->iothread_vq_mapping_list) { |
| if (!k->set_guest_notifiers || !k->ioeventfd_assign) { |
| error_setg(errp, |
| "device is incompatible with iothread " |
| "(transport does not support notifiers)"); |
| return false; |
| } |
| if (!virtio_device_ioeventfd_enabled(vdev)) { |
| error_setg(errp, "ioeventfd is required for iothread"); |
| return false; |
| } |
| |
| /* |
| * If ioeventfd is (re-)enabled while the guest is running there could |
| * be block jobs that can conflict. |
| */ |
| if (blk_op_is_blocked(conf->conf.blk, BLOCK_OP_TYPE_DATAPLANE, errp)) { |
| error_prepend(errp, "cannot start virtio-blk ioeventfd: "); |
| return false; |
| } |
| } |
| |
| s->vq_aio_context = g_new(AioContext *, conf->num_queues); |
| |
| if (conf->iothread_vq_mapping_list) { |
| if (!apply_iothread_vq_mapping(conf->iothread_vq_mapping_list, |
| s->vq_aio_context, |
| conf->num_queues, |
| errp)) { |
| g_free(s->vq_aio_context); |
| s->vq_aio_context = NULL; |
| return false; |
| } |
| } else if (conf->iothread) { |
| AioContext *ctx = iothread_get_aio_context(conf->iothread); |
| for (unsigned i = 0; i < conf->num_queues; i++) { |
| s->vq_aio_context[i] = ctx; |
| } |
| |
| /* Released in virtio_blk_vq_aio_context_cleanup() */ |
| object_ref(OBJECT(conf->iothread)); |
| } else { |
| AioContext *ctx = qemu_get_aio_context(); |
| for (unsigned i = 0; i < conf->num_queues; i++) { |
| s->vq_aio_context[i] = ctx; |
| } |
| } |
| |
| return true; |
| } |
| |
| /* Context: BQL held */ |
| static void virtio_blk_vq_aio_context_cleanup(VirtIOBlock *s) |
| { |
| VirtIOBlkConf *conf = &s->conf; |
| |
| assert(!s->ioeventfd_started); |
| |
| if (conf->iothread_vq_mapping_list) { |
| IOThreadVirtQueueMappingList *node; |
| |
| for (node = conf->iothread_vq_mapping_list; node; node = node->next) { |
| IOThread *iothread = iothread_by_id(node->value->iothread); |
| object_unref(OBJECT(iothread)); |
| } |
| } |
| |
| if (conf->iothread) { |
| object_unref(OBJECT(conf->iothread)); |
| } |
| |
| g_free(s->vq_aio_context); |
| s->vq_aio_context = NULL; |
| } |
| |
| /* Context: BQL held */ |
| static int virtio_blk_start_ioeventfd(VirtIODevice *vdev) |
| { |
| VirtIOBlock *s = VIRTIO_BLK(vdev); |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(s))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| unsigned i; |
| unsigned nvqs = s->conf.num_queues; |
| Error *local_err = NULL; |
| int r; |
| |
| if (s->ioeventfd_started || s->ioeventfd_starting) { |
| return 0; |
| } |
| |
| s->ioeventfd_starting = true; |
| |
| /* Set up guest notifier (irq) */ |
| r = k->set_guest_notifiers(qbus->parent, nvqs, true); |
| if (r != 0) { |
| error_report("virtio-blk failed to set guest notifier (%d), " |
| "ensure -accel kvm is set.", r); |
| goto fail_guest_notifiers; |
| } |
| |
| /* |
| * Batch all the host notifiers in a single transaction to avoid |
| * quadratic time complexity in address_space_update_ioeventfds(). |
| */ |
| memory_region_transaction_begin(); |
| |
| /* Set up virtqueue notify */ |
| for (i = 0; i < nvqs; i++) { |
| r = virtio_bus_set_host_notifier(VIRTIO_BUS(qbus), i, true); |
| if (r != 0) { |
| int j = i; |
| |
| fprintf(stderr, "virtio-blk failed to set host notifier (%d)\n", r); |
| while (i--) { |
| virtio_bus_set_host_notifier(VIRTIO_BUS(qbus), i, false); |
| } |
| |
| /* |
| * The transaction expects the ioeventfds to be open when it |
| * commits. Do it now, before the cleanup loop. |
| */ |
| memory_region_transaction_commit(); |
| |
| while (j--) { |
| virtio_bus_cleanup_host_notifier(VIRTIO_BUS(qbus), j); |
| } |
| goto fail_host_notifiers; |
| } |
| } |
| |
| memory_region_transaction_commit(); |
| |
| /* |
| * Try to change the AioContext so that block jobs and other operations can |
| * co-locate their activity in the same AioContext. If it fails, nevermind. |
| */ |
| assert(nvqs > 0); /* enforced during ->realize() */ |
| r = blk_set_aio_context(s->conf.conf.blk, s->vq_aio_context[0], |
| &local_err); |
| if (r < 0) { |
| warn_report_err(local_err); |
| } |
| |
| /* |
| * These fields must be visible to the IOThread when it processes the |
| * virtqueue, otherwise it will think ioeventfd has not started yet. |
| * |
| * Make sure ->ioeventfd_started is false when blk_set_aio_context() is |
| * called above so that draining does not cause the host notifier to be |
| * detached/attached prematurely. |
| */ |
| s->ioeventfd_starting = false; |
| s->ioeventfd_started = true; |
| smp_wmb(); /* paired with aio_notify_accept() on the read side */ |
| |
| /* |
| * Get this show started by hooking up our callbacks. If drained now, |
| * virtio_blk_drained_end() will do this later. |
| * Attaching the notifier also kicks the virtqueues, processing any requests |
| * they may already have. |
| */ |
| if (!blk_in_drain(s->conf.conf.blk)) { |
| virtio_blk_ioeventfd_attach(s); |
| } |
| return 0; |
| |
| fail_host_notifiers: |
| k->set_guest_notifiers(qbus->parent, nvqs, false); |
| fail_guest_notifiers: |
| s->ioeventfd_disabled = true; |
| s->ioeventfd_starting = false; |
| return -ENOSYS; |
| } |
| |
| /* Stop notifications for new requests from guest. |
| * |
| * Context: BH in IOThread |
| */ |
| static void virtio_blk_ioeventfd_stop_vq_bh(void *opaque) |
| { |
| VirtQueue *vq = opaque; |
| EventNotifier *host_notifier = virtio_queue_get_host_notifier(vq); |
| |
| virtio_queue_aio_detach_host_notifier(vq, qemu_get_current_aio_context()); |
| |
| /* |
| * Test and clear notifier after disabling event, in case poll callback |
| * didn't have time to run. |
| */ |
| virtio_queue_host_notifier_read(host_notifier); |
| } |
| |
| /* Context: BQL held */ |
| static void virtio_blk_stop_ioeventfd(VirtIODevice *vdev) |
| { |
| VirtIOBlock *s = VIRTIO_BLK(vdev); |
| BusState *qbus = qdev_get_parent_bus(DEVICE(s)); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| unsigned i; |
| unsigned nvqs = s->conf.num_queues; |
| |
| if (!s->ioeventfd_started || s->ioeventfd_stopping) { |
| return; |
| } |
| |
| /* Better luck next time. */ |
| if (s->ioeventfd_disabled) { |
| s->ioeventfd_disabled = false; |
| s->ioeventfd_started = false; |
| return; |
| } |
| s->ioeventfd_stopping = true; |
| |
| if (!blk_in_drain(s->conf.conf.blk)) { |
| for (i = 0; i < nvqs; i++) { |
| VirtQueue *vq = virtio_get_queue(vdev, i); |
| AioContext *ctx = s->vq_aio_context[i]; |
| |
| aio_wait_bh_oneshot(ctx, virtio_blk_ioeventfd_stop_vq_bh, vq); |
| } |
| } |
| |
| /* |
| * Batch all the host notifiers in a single transaction to avoid |
| * quadratic time complexity in address_space_update_ioeventfds(). |
| */ |
| memory_region_transaction_begin(); |
| |
| for (i = 0; i < nvqs; i++) { |
| virtio_bus_set_host_notifier(VIRTIO_BUS(qbus), i, false); |
| } |
| |
| /* |
| * The transaction expects the ioeventfds to be open when it |
| * commits. Do it now, before the cleanup loop. |
| */ |
| memory_region_transaction_commit(); |
| |
| for (i = 0; i < nvqs; i++) { |
| virtio_bus_cleanup_host_notifier(VIRTIO_BUS(qbus), i); |
| } |
| |
| /* |
| * Set ->ioeventfd_started to false before draining so that host notifiers |
| * are not detached/attached anymore. |
| */ |
| s->ioeventfd_started = false; |
| |
| /* Wait for virtio_blk_dma_restart_bh() and in flight I/O to complete */ |
| blk_drain(s->conf.conf.blk); |
| |
| /* |
| * Try to switch bs back to the QEMU main loop. If other users keep the |
| * BlockBackend in the iothread, that's ok |
| */ |
| blk_set_aio_context(s->conf.conf.blk, qemu_get_aio_context(), NULL); |
| |
| /* Clean up guest notifier (irq) */ |
| k->set_guest_notifiers(qbus->parent, nvqs, false); |
| |
| s->ioeventfd_stopping = false; |
| } |
| |
| static void virtio_blk_device_realize(DeviceState *dev, Error **errp) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VirtIOBlock *s = VIRTIO_BLK(dev); |
| VirtIOBlkConf *conf = &s->conf; |
| BlockDriverState *bs; |
| Error *err = NULL; |
| unsigned i; |
| |
| if (!conf->conf.blk) { |
| error_setg(errp, "drive property not set"); |
| return; |
| } |
| if (!blk_is_inserted(conf->conf.blk)) { |
| error_setg(errp, "Device needs media, but drive is empty"); |
| return; |
| } |
| if (conf->num_queues == VIRTIO_BLK_AUTO_NUM_QUEUES) { |
| conf->num_queues = 1; |
| } |
| if (!conf->num_queues) { |
| error_setg(errp, "num-queues property must be larger than 0"); |
| return; |
| } |
| if (conf->queue_size <= 2) { |
| error_setg(errp, "invalid queue-size property (%" PRIu16 "), " |
| "must be > 2", conf->queue_size); |
| return; |
| } |
| if (!is_power_of_2(conf->queue_size) || |
| conf->queue_size > VIRTQUEUE_MAX_SIZE) { |
| error_setg(errp, "invalid queue-size property (%" PRIu16 "), " |
| "must be a power of 2 (max %d)", |
| conf->queue_size, VIRTQUEUE_MAX_SIZE); |
| return; |
| } |
| |
| if (!blkconf_apply_backend_options(&conf->conf, |
| !blk_supports_write_perm(conf->conf.blk), |
| true, errp)) { |
| return; |
| } |
| s->original_wce = blk_enable_write_cache(conf->conf.blk); |
| if (!blkconf_geometry(&conf->conf, NULL, 65535, 255, 255, errp)) { |
| return; |
| } |
| |
| if (!blkconf_blocksizes(&conf->conf, errp)) { |
| return; |
| } |
| |
| bs = blk_bs(conf->conf.blk); |
| if (bs->bl.zoned != BLK_Z_NONE) { |
| virtio_add_feature(&s->host_features, VIRTIO_BLK_F_ZONED); |
| if (bs->bl.zoned == BLK_Z_HM) { |
| virtio_clear_feature(&s->host_features, VIRTIO_BLK_F_DISCARD); |
| } |
| } |
| |
| if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_DISCARD) && |
| (!conf->max_discard_sectors || |
| conf->max_discard_sectors > BDRV_REQUEST_MAX_SECTORS)) { |
| error_setg(errp, "invalid max-discard-sectors property (%" PRIu32 ")" |
| ", must be between 1 and %d", |
| conf->max_discard_sectors, (int)BDRV_REQUEST_MAX_SECTORS); |
| return; |
| } |
| |
| if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_WRITE_ZEROES) && |
| (!conf->max_write_zeroes_sectors || |
| conf->max_write_zeroes_sectors > BDRV_REQUEST_MAX_SECTORS)) { |
| error_setg(errp, "invalid max-write-zeroes-sectors property (%" PRIu32 |
| "), must be between 1 and %d", |
| conf->max_write_zeroes_sectors, |
| (int)BDRV_REQUEST_MAX_SECTORS); |
| return; |
| } |
| |
| s->config_size = virtio_get_config_size(&virtio_blk_cfg_size_params, |
| s->host_features); |
| virtio_init(vdev, VIRTIO_ID_BLOCK, s->config_size); |
| |
| qemu_mutex_init(&s->rq_lock); |
| |
| s->blk = conf->conf.blk; |
| s->rq = NULL; |
| s->sector_mask = (s->conf.conf.logical_block_size / BDRV_SECTOR_SIZE) - 1; |
| |
| for (i = 0; i < conf->num_queues; i++) { |
| virtio_add_queue(vdev, conf->queue_size, virtio_blk_handle_output); |
| } |
| qemu_coroutine_inc_pool_size(conf->num_queues * conf->queue_size / 2); |
| |
| /* Don't start ioeventfd if transport does not support notifiers. */ |
| if (!virtio_device_ioeventfd_enabled(vdev)) { |
| s->ioeventfd_disabled = true; |
| } |
| |
| virtio_blk_vq_aio_context_init(s, &err); |
| if (err != NULL) { |
| error_propagate(errp, err); |
| for (i = 0; i < conf->num_queues; i++) { |
| virtio_del_queue(vdev, i); |
| } |
| virtio_cleanup(vdev); |
| return; |
| } |
| |
| /* |
| * This must be after virtio_init() so virtio_blk_dma_restart_cb() gets |
| * called after ->start_ioeventfd() has already set blk's AioContext. |
| */ |
| s->change = |
| qdev_add_vm_change_state_handler(dev, virtio_blk_dma_restart_cb, s); |
| |
| blk_ram_registrar_init(&s->blk_ram_registrar, s->blk); |
| blk_set_dev_ops(s->blk, &virtio_block_ops, s); |
| |
| blk_iostatus_enable(s->blk); |
| |
| add_boot_device_lchs(dev, "/disk@0,0", |
| conf->conf.lcyls, |
| conf->conf.lheads, |
| conf->conf.lsecs); |
| } |
| |
| static void virtio_blk_device_unrealize(DeviceState *dev) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VirtIOBlock *s = VIRTIO_BLK(dev); |
| VirtIOBlkConf *conf = &s->conf; |
| unsigned i; |
| |
| blk_drain(s->blk); |
| del_boot_device_lchs(dev, "/disk@0,0"); |
| virtio_blk_vq_aio_context_cleanup(s); |
| for (i = 0; i < conf->num_queues; i++) { |
| virtio_del_queue(vdev, i); |
| } |
| qemu_coroutine_dec_pool_size(conf->num_queues * conf->queue_size / 2); |
| qemu_mutex_destroy(&s->rq_lock); |
| blk_ram_registrar_destroy(&s->blk_ram_registrar); |
| qemu_del_vm_change_state_handler(s->change); |
| blockdev_mark_auto_del(s->blk); |
| virtio_cleanup(vdev); |
| } |
| |
| static void virtio_blk_instance_init(Object *obj) |
| { |
| VirtIOBlock *s = VIRTIO_BLK(obj); |
| |
| device_add_bootindex_property(obj, &s->conf.conf.bootindex, |
| "bootindex", "/disk@0,0", |
| DEVICE(obj)); |
| } |
| |
| static const VMStateDescription vmstate_virtio_blk = { |
| .name = "virtio-blk", |
| .minimum_version_id = 2, |
| .version_id = 2, |
| .fields = (const VMStateField[]) { |
| VMSTATE_VIRTIO_DEVICE, |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| static Property virtio_blk_properties[] = { |
| DEFINE_BLOCK_PROPERTIES(VirtIOBlock, conf.conf), |
| DEFINE_BLOCK_ERROR_PROPERTIES(VirtIOBlock, conf.conf), |
| DEFINE_BLOCK_CHS_PROPERTIES(VirtIOBlock, conf.conf), |
| DEFINE_PROP_STRING("serial", VirtIOBlock, conf.serial), |
| DEFINE_PROP_BIT64("config-wce", VirtIOBlock, host_features, |
| VIRTIO_BLK_F_CONFIG_WCE, true), |
| DEFINE_PROP_BIT("request-merging", VirtIOBlock, conf.request_merging, 0, |
| true), |
| DEFINE_PROP_UINT16("num-queues", VirtIOBlock, conf.num_queues, |
| VIRTIO_BLK_AUTO_NUM_QUEUES), |
| DEFINE_PROP_UINT16("queue-size", VirtIOBlock, conf.queue_size, 256), |
| DEFINE_PROP_BOOL("seg-max-adjust", VirtIOBlock, conf.seg_max_adjust, true), |
| DEFINE_PROP_LINK("iothread", VirtIOBlock, conf.iothread, TYPE_IOTHREAD, |
| IOThread *), |
| DEFINE_PROP_IOTHREAD_VQ_MAPPING_LIST("iothread-vq-mapping", VirtIOBlock, |
| conf.iothread_vq_mapping_list), |
| DEFINE_PROP_BIT64("discard", VirtIOBlock, host_features, |
| VIRTIO_BLK_F_DISCARD, true), |
| DEFINE_PROP_BOOL("report-discard-granularity", VirtIOBlock, |
| conf.report_discard_granularity, true), |
| DEFINE_PROP_BIT64("write-zeroes", VirtIOBlock, host_features, |
| VIRTIO_BLK_F_WRITE_ZEROES, true), |
| DEFINE_PROP_UINT32("max-discard-sectors", VirtIOBlock, |
| conf.max_discard_sectors, BDRV_REQUEST_MAX_SECTORS), |
| DEFINE_PROP_UINT32("max-write-zeroes-sectors", VirtIOBlock, |
| conf.max_write_zeroes_sectors, BDRV_REQUEST_MAX_SECTORS), |
| DEFINE_PROP_BOOL("x-enable-wce-if-config-wce", VirtIOBlock, |
| conf.x_enable_wce_if_config_wce, true), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void virtio_blk_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass); |
| |
| device_class_set_props(dc, virtio_blk_properties); |
| dc->vmsd = &vmstate_virtio_blk; |
| set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); |
| vdc->realize = virtio_blk_device_realize; |
| vdc->unrealize = virtio_blk_device_unrealize; |
| vdc->get_config = virtio_blk_update_config; |
| vdc->set_config = virtio_blk_set_config; |
| vdc->get_features = virtio_blk_get_features; |
| vdc->set_status = virtio_blk_set_status; |
| vdc->reset = virtio_blk_reset; |
| vdc->save = virtio_blk_save_device; |
| vdc->load = virtio_blk_load_device; |
| vdc->start_ioeventfd = virtio_blk_start_ioeventfd; |
| vdc->stop_ioeventfd = virtio_blk_stop_ioeventfd; |
| } |
| |
| static const TypeInfo virtio_blk_info = { |
| .name = TYPE_VIRTIO_BLK, |
| .parent = TYPE_VIRTIO_DEVICE, |
| .instance_size = sizeof(VirtIOBlock), |
| .instance_init = virtio_blk_instance_init, |
| .class_init = virtio_blk_class_init, |
| }; |
| |
| static void virtio_register_types(void) |
| { |
| type_register_static(&virtio_blk_info); |
| } |
| |
| type_init(virtio_register_types) |