| /* |
| * Copyright (c) 2011, Max Filippov, Open Source and Linux Lab. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of the Open Source and Linux Lab nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "hw.h" |
| #include "qemu-log.h" |
| #include "qemu-timer.h" |
| |
| void xtensa_advance_ccount(CPUState *env, uint32_t d) |
| { |
| uint32_t old_ccount = env->sregs[CCOUNT]; |
| |
| env->sregs[CCOUNT] += d; |
| |
| if (xtensa_option_enabled(env->config, XTENSA_OPTION_TIMER_INTERRUPT)) { |
| int i; |
| for (i = 0; i < env->config->nccompare; ++i) { |
| if (env->sregs[CCOMPARE + i] - old_ccount <= d) { |
| xtensa_timer_irq(env, i, 1); |
| } |
| } |
| } |
| } |
| |
| void check_interrupts(CPUState *env) |
| { |
| int minlevel = xtensa_get_cintlevel(env); |
| uint32_t int_set_enabled = env->sregs[INTSET] & env->sregs[INTENABLE]; |
| int level; |
| |
| /* If the CPU is halted advance CCOUNT according to the vm_clock time |
| * elapsed since the moment when it was advanced last time. |
| */ |
| if (env->halted) { |
| int64_t now = qemu_get_clock_ns(vm_clock); |
| |
| xtensa_advance_ccount(env, |
| muldiv64(now - env->halt_clock, |
| env->config->clock_freq_khz, 1000000)); |
| env->halt_clock = now; |
| } |
| for (level = env->config->nlevel; level > minlevel; --level) { |
| if (env->config->level_mask[level] & int_set_enabled) { |
| env->pending_irq_level = level; |
| cpu_interrupt(env, CPU_INTERRUPT_HARD); |
| qemu_log_mask(CPU_LOG_INT, |
| "%s level = %d, cintlevel = %d, " |
| "pc = %08x, a0 = %08x, ps = %08x, " |
| "intset = %08x, intenable = %08x, " |
| "ccount = %08x\n", |
| __func__, level, xtensa_get_cintlevel(env), |
| env->pc, env->regs[0], env->sregs[PS], |
| env->sregs[INTSET], env->sregs[INTENABLE], |
| env->sregs[CCOUNT]); |
| return; |
| } |
| } |
| env->pending_irq_level = 0; |
| cpu_reset_interrupt(env, CPU_INTERRUPT_HARD); |
| } |
| |
| static void xtensa_set_irq(void *opaque, int irq, int active) |
| { |
| CPUState *env = opaque; |
| |
| if (irq >= env->config->ninterrupt) { |
| qemu_log("%s: bad IRQ %d\n", __func__, irq); |
| } else { |
| uint32_t irq_bit = 1 << irq; |
| |
| if (active) { |
| env->sregs[INTSET] |= irq_bit; |
| } else if (env->config->interrupt[irq].inttype == INTTYPE_LEVEL) { |
| env->sregs[INTSET] &= ~irq_bit; |
| } |
| |
| check_interrupts(env); |
| } |
| } |
| |
| void xtensa_timer_irq(CPUState *env, uint32_t id, uint32_t active) |
| { |
| qemu_set_irq(env->irq_inputs[env->config->timerint[id]], active); |
| } |
| |
| void xtensa_rearm_ccompare_timer(CPUState *env) |
| { |
| int i; |
| uint32_t wake_ccount = env->sregs[CCOUNT] - 1; |
| |
| for (i = 0; i < env->config->nccompare; ++i) { |
| if (env->sregs[CCOMPARE + i] - env->sregs[CCOUNT] < |
| wake_ccount - env->sregs[CCOUNT]) { |
| wake_ccount = env->sregs[CCOMPARE + i]; |
| } |
| } |
| env->wake_ccount = wake_ccount; |
| qemu_mod_timer(env->ccompare_timer, env->halt_clock + |
| muldiv64(wake_ccount - env->sregs[CCOUNT], |
| 1000000, env->config->clock_freq_khz)); |
| } |
| |
| static void xtensa_ccompare_cb(void *opaque) |
| { |
| CPUState *env = opaque; |
| |
| if (env->halted) { |
| env->halt_clock = qemu_get_clock_ns(vm_clock); |
| xtensa_advance_ccount(env, env->wake_ccount - env->sregs[CCOUNT]); |
| if (!cpu_has_work(env)) { |
| env->sregs[CCOUNT] = env->wake_ccount + 1; |
| xtensa_rearm_ccompare_timer(env); |
| } |
| } |
| } |
| |
| void xtensa_irq_init(CPUState *env) |
| { |
| env->irq_inputs = (void **)qemu_allocate_irqs( |
| xtensa_set_irq, env, env->config->ninterrupt); |
| if (xtensa_option_enabled(env->config, XTENSA_OPTION_TIMER_INTERRUPT) && |
| env->config->nccompare > 0) { |
| env->ccompare_timer = |
| qemu_new_timer_ns(vm_clock, &xtensa_ccompare_cb, env); |
| } |
| } |
| |
| void *xtensa_get_extint(CPUState *env, unsigned extint) |
| { |
| if (extint < env->config->nextint) { |
| unsigned irq = env->config->extint[extint]; |
| return env->irq_inputs[irq]; |
| } else { |
| qemu_log("%s: trying to acquire invalid external interrupt %d\n", |
| __func__, extint); |
| return NULL; |
| } |
| } |