| /* |
| * CFI parallel flash with AMD command set emulation |
| * |
| * Copyright (c) 2005 Jocelyn Mayer |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| /* |
| * For now, this code can emulate flashes of 1, 2 or 4 bytes width. |
| * Supported commands/modes are: |
| * - flash read |
| * - flash write |
| * - flash ID read |
| * - sector erase |
| * - chip erase |
| * - unlock bypass command |
| * - CFI queries |
| * |
| * It does not support flash interleaving. |
| * It does not implement software data protection as found in many real chips |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/block/block.h" |
| #include "hw/block/flash.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/qdev-properties-system.h" |
| #include "qapi/error.h" |
| #include "qemu/error-report.h" |
| #include "qemu/bitmap.h" |
| #include "qemu/timer.h" |
| #include "sysemu/block-backend.h" |
| #include "qemu/host-utils.h" |
| #include "qemu/module.h" |
| #include "hw/sysbus.h" |
| #include "migration/vmstate.h" |
| #include "trace.h" |
| |
| #define PFLASH_LAZY_ROMD_THRESHOLD 42 |
| |
| /* |
| * The size of the cfi_table indirectly depends on this and the start of the |
| * PRI table directly depends on it. 4 is the maximum size (and also what |
| * seems common) without changing the PRT table address. |
| */ |
| #define PFLASH_MAX_ERASE_REGIONS 4 |
| |
| /* Special write cycles for CFI queries. */ |
| enum { |
| WCYCLE_CFI = 7, |
| WCYCLE_AUTOSELECT_CFI = 8, |
| }; |
| |
| struct PFlashCFI02 { |
| /*< private >*/ |
| SysBusDevice parent_obj; |
| /*< public >*/ |
| |
| BlockBackend *blk; |
| uint32_t uniform_nb_blocs; |
| uint32_t uniform_sector_len; |
| uint32_t total_sectors; |
| uint32_t nb_blocs[PFLASH_MAX_ERASE_REGIONS]; |
| uint32_t sector_len[PFLASH_MAX_ERASE_REGIONS]; |
| uint32_t chip_len; |
| uint8_t mappings; |
| uint8_t width; |
| uint8_t be; |
| int wcycle; /* if 0, the flash is read normally */ |
| int bypass; |
| int ro; |
| uint8_t cmd; |
| uint8_t status; |
| /* FIXME: implement array device properties */ |
| uint16_t ident0; |
| uint16_t ident1; |
| uint16_t ident2; |
| uint16_t ident3; |
| uint16_t unlock_addr0; |
| uint16_t unlock_addr1; |
| uint8_t cfi_table[0x4d]; |
| QEMUTimer timer; |
| /* |
| * The device replicates the flash memory across its memory space. Emulate |
| * that by having a container (.mem) filled with an array of aliases |
| * (.mem_mappings) pointing to the flash memory (.orig_mem). |
| */ |
| MemoryRegion mem; |
| MemoryRegion *mem_mappings; /* array; one per mapping */ |
| MemoryRegion orig_mem; |
| bool rom_mode; |
| int read_counter; /* used for lazy switch-back to rom mode */ |
| int sectors_to_erase; |
| uint64_t erase_time_remaining; |
| unsigned long *sector_erase_map; |
| char *name; |
| void *storage; |
| }; |
| |
| /* |
| * Toggle status bit DQ7. |
| */ |
| static inline void toggle_dq7(PFlashCFI02 *pfl) |
| { |
| pfl->status ^= 0x80; |
| } |
| |
| /* |
| * Set status bit DQ7 to bit 7 of value. |
| */ |
| static inline void set_dq7(PFlashCFI02 *pfl, uint8_t value) |
| { |
| pfl->status &= 0x7F; |
| pfl->status |= value & 0x80; |
| } |
| |
| /* |
| * Toggle status bit DQ6. |
| */ |
| static inline void toggle_dq6(PFlashCFI02 *pfl) |
| { |
| pfl->status ^= 0x40; |
| } |
| |
| /* |
| * Turn on DQ3. |
| */ |
| static inline void assert_dq3(PFlashCFI02 *pfl) |
| { |
| pfl->status |= 0x08; |
| } |
| |
| /* |
| * Turn off DQ3. |
| */ |
| static inline void reset_dq3(PFlashCFI02 *pfl) |
| { |
| pfl->status &= ~0x08; |
| } |
| |
| /* |
| * Toggle status bit DQ2. |
| */ |
| static inline void toggle_dq2(PFlashCFI02 *pfl) |
| { |
| pfl->status ^= 0x04; |
| } |
| |
| /* |
| * Set up replicated mappings of the same region. |
| */ |
| static void pflash_setup_mappings(PFlashCFI02 *pfl) |
| { |
| unsigned i; |
| hwaddr size = memory_region_size(&pfl->orig_mem); |
| |
| memory_region_init(&pfl->mem, OBJECT(pfl), "pflash", pfl->mappings * size); |
| pfl->mem_mappings = g_new(MemoryRegion, pfl->mappings); |
| for (i = 0; i < pfl->mappings; ++i) { |
| memory_region_init_alias(&pfl->mem_mappings[i], OBJECT(pfl), |
| "pflash-alias", &pfl->orig_mem, 0, size); |
| memory_region_add_subregion(&pfl->mem, i * size, &pfl->mem_mappings[i]); |
| } |
| } |
| |
| static void pflash_reset_state_machine(PFlashCFI02 *pfl) |
| { |
| trace_pflash_reset(pfl->name); |
| pfl->cmd = 0x00; |
| pfl->wcycle = 0; |
| } |
| |
| static void pflash_mode_read_array(PFlashCFI02 *pfl) |
| { |
| trace_pflash_mode_read_array(pfl->name); |
| pflash_reset_state_machine(pfl); |
| pfl->rom_mode = true; |
| memory_region_rom_device_set_romd(&pfl->orig_mem, true); |
| } |
| |
| static size_t pflash_regions_count(PFlashCFI02 *pfl) |
| { |
| return pfl->cfi_table[0x2c]; |
| } |
| |
| /* |
| * Returns the time it takes to erase the number of sectors scheduled for |
| * erasure based on CFI address 0x21 which is "Typical timeout per individual |
| * block erase 2^N ms." |
| */ |
| static uint64_t pflash_erase_time(PFlashCFI02 *pfl) |
| { |
| /* |
| * If there are no sectors to erase (which can happen if all of the sectors |
| * to be erased are protected), then erase takes 100 us. Protected sectors |
| * aren't supported so this should never happen. |
| */ |
| return ((1ULL << pfl->cfi_table[0x21]) * pfl->sectors_to_erase) * SCALE_US; |
| } |
| |
| /* |
| * Returns true if the device is currently in erase suspend mode. |
| */ |
| static inline bool pflash_erase_suspend_mode(PFlashCFI02 *pfl) |
| { |
| return pfl->erase_time_remaining > 0; |
| } |
| |
| static void pflash_timer(void *opaque) |
| { |
| PFlashCFI02 *pfl = opaque; |
| |
| trace_pflash_timer_expired(pfl->name, pfl->cmd); |
| if (pfl->cmd == 0x30) { |
| /* |
| * Sector erase. If DQ3 is 0 when the timer expires, then the 50 |
| * us erase timeout has expired so we need to start the timer for the |
| * sector erase algorithm. Otherwise, the erase completed and we should |
| * go back to read array mode. |
| */ |
| if ((pfl->status & 0x08) == 0) { |
| assert_dq3(pfl); |
| uint64_t timeout = pflash_erase_time(pfl); |
| timer_mod(&pfl->timer, |
| qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + timeout); |
| trace_pflash_erase_timeout(pfl->name, pfl->sectors_to_erase); |
| return; |
| } |
| trace_pflash_erase_complete(pfl->name); |
| bitmap_zero(pfl->sector_erase_map, pfl->total_sectors); |
| pfl->sectors_to_erase = 0; |
| reset_dq3(pfl); |
| } |
| |
| /* Reset flash */ |
| toggle_dq7(pfl); |
| if (pfl->bypass) { |
| pfl->wcycle = 2; |
| pfl->cmd = 0; |
| } else { |
| pflash_mode_read_array(pfl); |
| } |
| } |
| |
| /* |
| * Read data from flash. |
| */ |
| static uint64_t pflash_data_read(PFlashCFI02 *pfl, hwaddr offset, |
| unsigned int width) |
| { |
| uint8_t *p = (uint8_t *)pfl->storage + offset; |
| uint64_t ret = pfl->be ? ldn_be_p(p, width) : ldn_le_p(p, width); |
| trace_pflash_data_read(pfl->name, offset, width, ret); |
| return ret; |
| } |
| |
| typedef struct { |
| uint32_t len; |
| uint32_t num; |
| } SectorInfo; |
| |
| /* |
| * offset should be a byte offset of the QEMU device and _not_ a device |
| * offset. |
| */ |
| static SectorInfo pflash_sector_info(PFlashCFI02 *pfl, hwaddr offset) |
| { |
| assert(offset < pfl->chip_len); |
| hwaddr addr = 0; |
| uint32_t sector_num = 0; |
| for (int i = 0; i < pflash_regions_count(pfl); ++i) { |
| uint64_t region_size = (uint64_t)pfl->nb_blocs[i] * pfl->sector_len[i]; |
| if (addr <= offset && offset < addr + region_size) { |
| return (SectorInfo) { |
| .len = pfl->sector_len[i], |
| .num = sector_num + (offset - addr) / pfl->sector_len[i], |
| }; |
| } |
| sector_num += pfl->nb_blocs[i]; |
| addr += region_size; |
| } |
| abort(); |
| } |
| |
| /* |
| * Returns true if the offset refers to a flash sector that is currently being |
| * erased. |
| */ |
| static bool pflash_sector_is_erasing(PFlashCFI02 *pfl, hwaddr offset) |
| { |
| long sector_num = pflash_sector_info(pfl, offset).num; |
| return test_bit(sector_num, pfl->sector_erase_map); |
| } |
| |
| static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width) |
| { |
| PFlashCFI02 *pfl = opaque; |
| hwaddr boff; |
| uint64_t ret; |
| |
| /* Lazy reset to ROMD mode after a certain amount of read accesses */ |
| if (!pfl->rom_mode && pfl->wcycle == 0 && |
| ++pfl->read_counter > PFLASH_LAZY_ROMD_THRESHOLD) { |
| pflash_mode_read_array(pfl); |
| } |
| offset &= pfl->chip_len - 1; |
| boff = offset & 0xFF; |
| if (pfl->width == 2) { |
| boff = boff >> 1; |
| } else if (pfl->width == 4) { |
| boff = boff >> 2; |
| } |
| switch (pfl->cmd) { |
| default: |
| /* This should never happen : reset state & treat it as a read*/ |
| trace_pflash_read_unknown_state(pfl->name, pfl->cmd); |
| pflash_reset_state_machine(pfl); |
| /* fall through to the read code */ |
| case 0x80: /* Erase (unlock) */ |
| /* We accept reads during second unlock sequence... */ |
| case 0x00: |
| if (pflash_erase_suspend_mode(pfl) && |
| pflash_sector_is_erasing(pfl, offset)) { |
| /* Toggle bit 2, but not 6. */ |
| toggle_dq2(pfl); |
| /* Status register read */ |
| ret = pfl->status; |
| trace_pflash_read_status(pfl->name, ret); |
| break; |
| } |
| /* Flash area read */ |
| ret = pflash_data_read(pfl, offset, width); |
| break; |
| case 0x90: /* flash ID read */ |
| switch (boff) { |
| case 0x00: |
| case 0x01: |
| ret = boff & 0x01 ? pfl->ident1 : pfl->ident0; |
| break; |
| case 0x02: |
| ret = 0x00; /* Pretend all sectors are unprotected */ |
| break; |
| case 0x0E: |
| case 0x0F: |
| ret = boff & 0x01 ? pfl->ident3 : pfl->ident2; |
| if (ret != (uint8_t)-1) { |
| break; |
| } |
| /* Fall through to data read. */ |
| default: |
| ret = pflash_data_read(pfl, offset, width); |
| } |
| trace_pflash_read_done(pfl->name, boff, ret); |
| break; |
| case 0x10: /* Chip Erase */ |
| case 0x30: /* Sector Erase */ |
| /* Toggle bit 2 during erase, but not program. */ |
| toggle_dq2(pfl); |
| /* fall through */ |
| case 0xA0: /* Program */ |
| /* Toggle bit 6 */ |
| toggle_dq6(pfl); |
| /* Status register read */ |
| ret = pfl->status; |
| trace_pflash_read_status(pfl->name, ret); |
| break; |
| case 0x98: |
| /* CFI query mode */ |
| if (boff < sizeof(pfl->cfi_table)) { |
| ret = pfl->cfi_table[boff]; |
| } else { |
| ret = 0; |
| } |
| break; |
| } |
| trace_pflash_io_read(pfl->name, offset, width, ret, pfl->cmd, pfl->wcycle); |
| |
| return ret; |
| } |
| |
| /* update flash content on disk */ |
| static void pflash_update(PFlashCFI02 *pfl, int offset, int size) |
| { |
| int offset_end; |
| int ret; |
| if (pfl->blk) { |
| offset_end = offset + size; |
| /* widen to sector boundaries */ |
| offset = QEMU_ALIGN_DOWN(offset, BDRV_SECTOR_SIZE); |
| offset_end = QEMU_ALIGN_UP(offset_end, BDRV_SECTOR_SIZE); |
| ret = blk_pwrite(pfl->blk, offset, offset_end - offset, |
| pfl->storage + offset, 0); |
| if (ret < 0) { |
| /* TODO set error bit in status */ |
| error_report("Could not update PFLASH: %s", strerror(-ret)); |
| } |
| } |
| } |
| |
| static void pflash_sector_erase(PFlashCFI02 *pfl, hwaddr offset) |
| { |
| SectorInfo sector_info = pflash_sector_info(pfl, offset); |
| uint64_t sector_len = sector_info.len; |
| offset &= ~(sector_len - 1); |
| trace_pflash_sector_erase_start(pfl->name, pfl->width * 2, offset, |
| pfl->width * 2, offset + sector_len - 1); |
| if (!pfl->ro) { |
| uint8_t *p = pfl->storage; |
| memset(p + offset, 0xff, sector_len); |
| pflash_update(pfl, offset, sector_len); |
| } |
| set_dq7(pfl, 0x00); |
| ++pfl->sectors_to_erase; |
| set_bit(sector_info.num, pfl->sector_erase_map); |
| /* Set (or reset) the 50 us timer for additional erase commands. */ |
| timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 50000); |
| } |
| |
| static void pflash_write(void *opaque, hwaddr offset, uint64_t value, |
| unsigned int width) |
| { |
| PFlashCFI02 *pfl = opaque; |
| hwaddr boff; |
| uint8_t *p; |
| uint8_t cmd; |
| |
| trace_pflash_io_write(pfl->name, offset, width, value, pfl->wcycle); |
| cmd = value; |
| if (pfl->cmd != 0xA0) { |
| /* Reset does nothing during chip erase and sector erase. */ |
| if (cmd == 0xF0 && pfl->cmd != 0x10 && pfl->cmd != 0x30) { |
| if (pfl->wcycle == WCYCLE_AUTOSELECT_CFI) { |
| /* Return to autoselect mode. */ |
| pfl->wcycle = 3; |
| pfl->cmd = 0x90; |
| return; |
| } |
| goto reset_flash; |
| } |
| } |
| offset &= pfl->chip_len - 1; |
| |
| boff = offset; |
| if (pfl->width == 2) { |
| boff = boff >> 1; |
| } else if (pfl->width == 4) { |
| boff = boff >> 2; |
| } |
| /* Only the least-significant 11 bits are used in most cases. */ |
| boff &= 0x7FF; |
| switch (pfl->wcycle) { |
| case 0: |
| /* Set the device in I/O access mode if required */ |
| if (pfl->rom_mode) { |
| pfl->rom_mode = false; |
| memory_region_rom_device_set_romd(&pfl->orig_mem, false); |
| } |
| pfl->read_counter = 0; |
| /* We're in read mode */ |
| check_unlock0: |
| if (boff == 0x55 && cmd == 0x98) { |
| /* Enter CFI query mode */ |
| pfl->wcycle = WCYCLE_CFI; |
| pfl->cmd = 0x98; |
| return; |
| } |
| /* Handle erase resume in erase suspend mode, otherwise reset. */ |
| if (cmd == 0x30) { /* Erase Resume */ |
| if (pflash_erase_suspend_mode(pfl)) { |
| /* Resume the erase. */ |
| timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + |
| pfl->erase_time_remaining); |
| pfl->erase_time_remaining = 0; |
| pfl->wcycle = 6; |
| pfl->cmd = 0x30; |
| set_dq7(pfl, 0x00); |
| assert_dq3(pfl); |
| return; |
| } |
| goto reset_flash; |
| } |
| /* Ignore erase suspend. */ |
| if (cmd == 0xB0) { /* Erase Suspend */ |
| return; |
| } |
| if (boff != pfl->unlock_addr0 || cmd != 0xAA) { |
| trace_pflash_unlock0_failed(pfl->name, boff, |
| cmd, pfl->unlock_addr0); |
| goto reset_flash; |
| } |
| trace_pflash_write(pfl->name, "unlock sequence started"); |
| break; |
| case 1: |
| /* We started an unlock sequence */ |
| check_unlock1: |
| if (boff != pfl->unlock_addr1 || cmd != 0x55) { |
| trace_pflash_unlock1_failed(pfl->name, boff, cmd); |
| goto reset_flash; |
| } |
| trace_pflash_write(pfl->name, "unlock sequence done"); |
| break; |
| case 2: |
| /* We finished an unlock sequence */ |
| if (!pfl->bypass && boff != pfl->unlock_addr0) { |
| trace_pflash_write_failed(pfl->name, boff, cmd); |
| goto reset_flash; |
| } |
| switch (cmd) { |
| case 0x20: |
| pfl->bypass = 1; |
| goto do_bypass; |
| case 0x80: /* Erase */ |
| case 0x90: /* Autoselect */ |
| case 0xA0: /* Program */ |
| pfl->cmd = cmd; |
| trace_pflash_write_start(pfl->name, cmd); |
| break; |
| default: |
| trace_pflash_write_unknown(pfl->name, cmd); |
| goto reset_flash; |
| } |
| break; |
| case 3: |
| switch (pfl->cmd) { |
| case 0x80: /* Erase */ |
| /* We need another unlock sequence */ |
| goto check_unlock0; |
| case 0xA0: /* Program */ |
| if (pflash_erase_suspend_mode(pfl) && |
| pflash_sector_is_erasing(pfl, offset)) { |
| /* Ignore writes to erasing sectors. */ |
| if (pfl->bypass) { |
| goto do_bypass; |
| } |
| goto reset_flash; |
| } |
| trace_pflash_data_write(pfl->name, offset, width, value); |
| if (!pfl->ro) { |
| p = (uint8_t *)pfl->storage + offset; |
| if (pfl->be) { |
| uint64_t current = ldn_be_p(p, width); |
| stn_be_p(p, width, current & value); |
| } else { |
| uint64_t current = ldn_le_p(p, width); |
| stn_le_p(p, width, current & value); |
| } |
| pflash_update(pfl, offset, width); |
| } |
| /* |
| * While programming, status bit DQ7 should hold the opposite |
| * value from how it was programmed. |
| */ |
| set_dq7(pfl, ~value); |
| /* Let's pretend write is immediate */ |
| if (pfl->bypass) |
| goto do_bypass; |
| goto reset_flash; |
| case 0x90: /* Autoselect */ |
| if (pfl->bypass && cmd == 0x00) { |
| /* Unlock bypass reset */ |
| goto reset_flash; |
| } |
| /* |
| * We can enter CFI query mode from autoselect mode, but we must |
| * return to autoselect mode after a reset. |
| */ |
| if (boff == 0x55 && cmd == 0x98) { |
| /* Enter autoselect CFI query mode */ |
| pfl->wcycle = WCYCLE_AUTOSELECT_CFI; |
| pfl->cmd = 0x98; |
| return; |
| } |
| /* fall through */ |
| default: |
| trace_pflash_write_invalid(pfl->name, pfl->cmd); |
| goto reset_flash; |
| } |
| case 4: |
| switch (pfl->cmd) { |
| case 0xA0: /* Program */ |
| /* Ignore writes while flash data write is occurring */ |
| /* As we suppose write is immediate, this should never happen */ |
| return; |
| case 0x80: /* Erase */ |
| goto check_unlock1; |
| default: |
| /* Should never happen */ |
| trace_pflash_write_invalid_state(pfl->name, pfl->cmd, 5); |
| goto reset_flash; |
| } |
| break; |
| case 5: |
| if (pflash_erase_suspend_mode(pfl)) { |
| /* Erasing is not supported in erase suspend mode. */ |
| goto reset_flash; |
| } |
| switch (cmd) { |
| case 0x10: /* Chip Erase */ |
| if (boff != pfl->unlock_addr0) { |
| trace_pflash_chip_erase_invalid(pfl->name, offset); |
| goto reset_flash; |
| } |
| /* Chip erase */ |
| trace_pflash_chip_erase_start(pfl->name); |
| if (!pfl->ro) { |
| memset(pfl->storage, 0xff, pfl->chip_len); |
| pflash_update(pfl, 0, pfl->chip_len); |
| } |
| set_dq7(pfl, 0x00); |
| /* Wait the time specified at CFI address 0x22. */ |
| timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + |
| (1ULL << pfl->cfi_table[0x22]) * SCALE_MS); |
| break; |
| case 0x30: /* Sector erase */ |
| pflash_sector_erase(pfl, offset); |
| break; |
| default: |
| trace_pflash_write_invalid_command(pfl->name, cmd); |
| goto reset_flash; |
| } |
| pfl->cmd = cmd; |
| break; |
| case 6: |
| switch (pfl->cmd) { |
| case 0x10: /* Chip Erase */ |
| /* Ignore writes during chip erase */ |
| return; |
| case 0x30: /* Sector erase */ |
| if (cmd == 0xB0) { |
| /* |
| * If erase suspend happens during the erase timeout (so DQ3 is |
| * 0), then the device suspends erasing immediately. Set the |
| * remaining time to be the total time to erase. Otherwise, |
| * there is a maximum amount of time it can take to enter |
| * suspend mode. Let's ignore that and suspend immediately and |
| * set the remaining time to the actual time remaining on the |
| * timer. |
| */ |
| if ((pfl->status & 0x08) == 0) { |
| pfl->erase_time_remaining = pflash_erase_time(pfl); |
| } else { |
| int64_t delta = timer_expire_time_ns(&pfl->timer) - |
| qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); |
| /* Make sure we have a positive time remaining. */ |
| pfl->erase_time_remaining = delta <= 0 ? 1 : delta; |
| } |
| reset_dq3(pfl); |
| timer_del(&pfl->timer); |
| pflash_reset_state_machine(pfl); |
| return; |
| } |
| /* |
| * If DQ3 is 0, additional sector erase commands can be |
| * written and anything else (other than an erase suspend) resets |
| * the device. |
| */ |
| if ((pfl->status & 0x08) == 0) { |
| if (cmd == 0x30) { |
| pflash_sector_erase(pfl, offset); |
| } else { |
| goto reset_flash; |
| } |
| } |
| /* Ignore writes during the actual erase. */ |
| return; |
| default: |
| /* Should never happen */ |
| trace_pflash_write_invalid_state(pfl->name, pfl->cmd, 6); |
| goto reset_flash; |
| } |
| break; |
| /* Special values for CFI queries */ |
| case WCYCLE_CFI: |
| case WCYCLE_AUTOSELECT_CFI: |
| trace_pflash_write(pfl->name, "invalid write in CFI query mode"); |
| goto reset_flash; |
| default: |
| /* Should never happen */ |
| trace_pflash_write(pfl->name, "invalid write state (wc 7)"); |
| goto reset_flash; |
| } |
| pfl->wcycle++; |
| |
| return; |
| |
| /* Reset flash */ |
| reset_flash: |
| pfl->bypass = 0; |
| pflash_reset_state_machine(pfl); |
| return; |
| |
| do_bypass: |
| pfl->wcycle = 2; |
| pfl->cmd = 0; |
| } |
| |
| static const MemoryRegionOps pflash_cfi02_ops = { |
| .read = pflash_read, |
| .write = pflash_write, |
| .valid.min_access_size = 1, |
| .valid.max_access_size = 4, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void pflash_cfi02_fill_cfi_table(PFlashCFI02 *pfl, int nb_regions) |
| { |
| /* Hardcoded CFI table (mostly from SG29 Spansion flash) */ |
| const uint16_t pri_ofs = 0x40; |
| /* Standard "QRY" string */ |
| pfl->cfi_table[0x10] = 'Q'; |
| pfl->cfi_table[0x11] = 'R'; |
| pfl->cfi_table[0x12] = 'Y'; |
| /* Command set (AMD/Fujitsu) */ |
| pfl->cfi_table[0x13] = 0x02; |
| pfl->cfi_table[0x14] = 0x00; |
| /* Primary extended table address */ |
| pfl->cfi_table[0x15] = pri_ofs; |
| pfl->cfi_table[0x16] = pri_ofs >> 8; |
| /* Alternate command set (none) */ |
| pfl->cfi_table[0x17] = 0x00; |
| pfl->cfi_table[0x18] = 0x00; |
| /* Alternate extended table (none) */ |
| pfl->cfi_table[0x19] = 0x00; |
| pfl->cfi_table[0x1A] = 0x00; |
| /* Vcc min */ |
| pfl->cfi_table[0x1B] = 0x27; |
| /* Vcc max */ |
| pfl->cfi_table[0x1C] = 0x36; |
| /* Vpp min (no Vpp pin) */ |
| pfl->cfi_table[0x1D] = 0x00; |
| /* Vpp max (no Vpp pin) */ |
| pfl->cfi_table[0x1E] = 0x00; |
| /* Timeout per single byte/word write (128 ms) */ |
| pfl->cfi_table[0x1F] = 0x07; |
| /* Timeout for min size buffer write (NA) */ |
| pfl->cfi_table[0x20] = 0x00; |
| /* Typical timeout for block erase (512 ms) */ |
| pfl->cfi_table[0x21] = 0x09; |
| /* Typical timeout for full chip erase (4096 ms) */ |
| pfl->cfi_table[0x22] = 0x0C; |
| /* Reserved */ |
| pfl->cfi_table[0x23] = 0x01; |
| /* Max timeout for buffer write (NA) */ |
| pfl->cfi_table[0x24] = 0x00; |
| /* Max timeout for block erase */ |
| pfl->cfi_table[0x25] = 0x0A; |
| /* Max timeout for chip erase */ |
| pfl->cfi_table[0x26] = 0x0D; |
| /* Device size */ |
| pfl->cfi_table[0x27] = ctz32(pfl->chip_len); |
| /* Flash device interface (8 & 16 bits) */ |
| pfl->cfi_table[0x28] = 0x02; |
| pfl->cfi_table[0x29] = 0x00; |
| /* Max number of bytes in multi-bytes write */ |
| /* |
| * XXX: disable buffered write as it's not supported |
| * pfl->cfi_table[0x2A] = 0x05; |
| */ |
| pfl->cfi_table[0x2A] = 0x00; |
| pfl->cfi_table[0x2B] = 0x00; |
| /* Number of erase block regions */ |
| pfl->cfi_table[0x2c] = nb_regions; |
| /* Erase block regions */ |
| for (int i = 0; i < nb_regions; ++i) { |
| uint32_t sector_len_per_device = pfl->sector_len[i]; |
| pfl->cfi_table[0x2d + 4 * i] = pfl->nb_blocs[i] - 1; |
| pfl->cfi_table[0x2e + 4 * i] = (pfl->nb_blocs[i] - 1) >> 8; |
| pfl->cfi_table[0x2f + 4 * i] = sector_len_per_device >> 8; |
| pfl->cfi_table[0x30 + 4 * i] = sector_len_per_device >> 16; |
| } |
| assert(0x2c + 4 * nb_regions < pri_ofs); |
| |
| /* Extended */ |
| pfl->cfi_table[0x00 + pri_ofs] = 'P'; |
| pfl->cfi_table[0x01 + pri_ofs] = 'R'; |
| pfl->cfi_table[0x02 + pri_ofs] = 'I'; |
| |
| /* Extended version 1.0 */ |
| pfl->cfi_table[0x03 + pri_ofs] = '1'; |
| pfl->cfi_table[0x04 + pri_ofs] = '0'; |
| |
| /* Address sensitive unlock required. */ |
| pfl->cfi_table[0x05 + pri_ofs] = 0x00; |
| /* Erase suspend to read/write. */ |
| pfl->cfi_table[0x06 + pri_ofs] = 0x02; |
| /* Sector protect not supported. */ |
| pfl->cfi_table[0x07 + pri_ofs] = 0x00; |
| /* Temporary sector unprotect not supported. */ |
| pfl->cfi_table[0x08 + pri_ofs] = 0x00; |
| |
| /* Sector protect/unprotect scheme. */ |
| pfl->cfi_table[0x09 + pri_ofs] = 0x00; |
| |
| /* Simultaneous operation not supported. */ |
| pfl->cfi_table[0x0a + pri_ofs] = 0x00; |
| /* Burst mode not supported. */ |
| pfl->cfi_table[0x0b + pri_ofs] = 0x00; |
| /* Page mode not supported. */ |
| pfl->cfi_table[0x0c + pri_ofs] = 0x00; |
| assert(0x0c + pri_ofs < ARRAY_SIZE(pfl->cfi_table)); |
| } |
| |
| static void pflash_cfi02_realize(DeviceState *dev, Error **errp) |
| { |
| ERRP_GUARD(); |
| PFlashCFI02 *pfl = PFLASH_CFI02(dev); |
| int ret; |
| |
| if (pfl->uniform_sector_len == 0 && pfl->sector_len[0] == 0) { |
| error_setg(errp, "attribute \"sector-length\" not specified or zero."); |
| return; |
| } |
| if (pfl->uniform_nb_blocs == 0 && pfl->nb_blocs[0] == 0) { |
| error_setg(errp, "attribute \"num-blocks\" not specified or zero."); |
| return; |
| } |
| if (pfl->name == NULL) { |
| error_setg(errp, "attribute \"name\" not specified."); |
| return; |
| } |
| |
| int nb_regions; |
| pfl->chip_len = 0; |
| pfl->total_sectors = 0; |
| for (nb_regions = 0; nb_regions < PFLASH_MAX_ERASE_REGIONS; ++nb_regions) { |
| if (pfl->nb_blocs[nb_regions] == 0) { |
| break; |
| } |
| pfl->total_sectors += pfl->nb_blocs[nb_regions]; |
| uint64_t sector_len_per_device = pfl->sector_len[nb_regions]; |
| |
| /* |
| * The size of each flash sector must be a power of 2 and it must be |
| * aligned at the same power of 2. |
| */ |
| if (sector_len_per_device & 0xff || |
| sector_len_per_device >= (1 << 24) || |
| !is_power_of_2(sector_len_per_device)) |
| { |
| error_setg(errp, "unsupported configuration: " |
| "sector length[%d] per device = %" PRIx64 ".", |
| nb_regions, sector_len_per_device); |
| return; |
| } |
| if (pfl->chip_len & (sector_len_per_device - 1)) { |
| error_setg(errp, "unsupported configuration: " |
| "flash region %d not correctly aligned.", |
| nb_regions); |
| return; |
| } |
| |
| pfl->chip_len += (uint64_t)pfl->sector_len[nb_regions] * |
| pfl->nb_blocs[nb_regions]; |
| } |
| |
| uint64_t uniform_len = (uint64_t)pfl->uniform_nb_blocs * |
| pfl->uniform_sector_len; |
| if (nb_regions == 0) { |
| nb_regions = 1; |
| pfl->nb_blocs[0] = pfl->uniform_nb_blocs; |
| pfl->sector_len[0] = pfl->uniform_sector_len; |
| pfl->chip_len = uniform_len; |
| pfl->total_sectors = pfl->uniform_nb_blocs; |
| } else if (uniform_len != 0 && uniform_len != pfl->chip_len) { |
| error_setg(errp, "\"num-blocks\"*\"sector-length\" " |
| "different from \"num-blocks0\"*\'sector-length0\" + ... + " |
| "\"num-blocks3\"*\"sector-length3\""); |
| return; |
| } |
| |
| memory_region_init_rom_device(&pfl->orig_mem, OBJECT(pfl), |
| &pflash_cfi02_ops, pfl, pfl->name, |
| pfl->chip_len, errp); |
| if (*errp) { |
| return; |
| } |
| |
| pfl->storage = memory_region_get_ram_ptr(&pfl->orig_mem); |
| |
| if (pfl->blk) { |
| uint64_t perm; |
| pfl->ro = !blk_supports_write_perm(pfl->blk); |
| perm = BLK_PERM_CONSISTENT_READ | (pfl->ro ? 0 : BLK_PERM_WRITE); |
| ret = blk_set_perm(pfl->blk, perm, BLK_PERM_ALL, errp); |
| if (ret < 0) { |
| return; |
| } |
| } else { |
| pfl->ro = 0; |
| } |
| |
| if (pfl->blk) { |
| if (!blk_check_size_and_read_all(pfl->blk, dev, pfl->storage, |
| pfl->chip_len, errp)) { |
| vmstate_unregister_ram(&pfl->orig_mem, DEVICE(pfl)); |
| return; |
| } |
| } |
| |
| /* Only 11 bits are used in the comparison. */ |
| pfl->unlock_addr0 &= 0x7FF; |
| pfl->unlock_addr1 &= 0x7FF; |
| |
| /* Allocate memory for a bitmap for sectors being erased. */ |
| pfl->sector_erase_map = bitmap_new(pfl->total_sectors); |
| |
| pfl->rom_mode = true; |
| if (pfl->mappings > 1) { |
| pflash_setup_mappings(pfl); |
| sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->mem); |
| } else { |
| sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->orig_mem); |
| } |
| |
| timer_init_ns(&pfl->timer, QEMU_CLOCK_VIRTUAL, pflash_timer, pfl); |
| pfl->status = 0; |
| |
| pflash_cfi02_fill_cfi_table(pfl, nb_regions); |
| } |
| |
| static void pflash_cfi02_reset(DeviceState *dev) |
| { |
| PFlashCFI02 *pfl = PFLASH_CFI02(dev); |
| |
| pflash_reset_state_machine(pfl); |
| } |
| |
| static Property pflash_cfi02_properties[] = { |
| DEFINE_PROP_DRIVE("drive", PFlashCFI02, blk), |
| DEFINE_PROP_UINT32("num-blocks", PFlashCFI02, uniform_nb_blocs, 0), |
| DEFINE_PROP_UINT32("sector-length", PFlashCFI02, uniform_sector_len, 0), |
| DEFINE_PROP_UINT32("num-blocks0", PFlashCFI02, nb_blocs[0], 0), |
| DEFINE_PROP_UINT32("sector-length0", PFlashCFI02, sector_len[0], 0), |
| DEFINE_PROP_UINT32("num-blocks1", PFlashCFI02, nb_blocs[1], 0), |
| DEFINE_PROP_UINT32("sector-length1", PFlashCFI02, sector_len[1], 0), |
| DEFINE_PROP_UINT32("num-blocks2", PFlashCFI02, nb_blocs[2], 0), |
| DEFINE_PROP_UINT32("sector-length2", PFlashCFI02, sector_len[2], 0), |
| DEFINE_PROP_UINT32("num-blocks3", PFlashCFI02, nb_blocs[3], 0), |
| DEFINE_PROP_UINT32("sector-length3", PFlashCFI02, sector_len[3], 0), |
| DEFINE_PROP_UINT8("width", PFlashCFI02, width, 0), |
| DEFINE_PROP_UINT8("mappings", PFlashCFI02, mappings, 0), |
| DEFINE_PROP_UINT8("big-endian", PFlashCFI02, be, 0), |
| DEFINE_PROP_UINT16("id0", PFlashCFI02, ident0, 0), |
| DEFINE_PROP_UINT16("id1", PFlashCFI02, ident1, 0), |
| DEFINE_PROP_UINT16("id2", PFlashCFI02, ident2, 0), |
| DEFINE_PROP_UINT16("id3", PFlashCFI02, ident3, 0), |
| DEFINE_PROP_UINT16("unlock-addr0", PFlashCFI02, unlock_addr0, 0), |
| DEFINE_PROP_UINT16("unlock-addr1", PFlashCFI02, unlock_addr1, 0), |
| DEFINE_PROP_STRING("name", PFlashCFI02, name), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void pflash_cfi02_unrealize(DeviceState *dev) |
| { |
| PFlashCFI02 *pfl = PFLASH_CFI02(dev); |
| timer_del(&pfl->timer); |
| g_free(pfl->sector_erase_map); |
| } |
| |
| static void pflash_cfi02_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = pflash_cfi02_realize; |
| dc->reset = pflash_cfi02_reset; |
| dc->unrealize = pflash_cfi02_unrealize; |
| device_class_set_props(dc, pflash_cfi02_properties); |
| set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); |
| } |
| |
| static const TypeInfo pflash_cfi02_info = { |
| .name = TYPE_PFLASH_CFI02, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(PFlashCFI02), |
| .class_init = pflash_cfi02_class_init, |
| }; |
| |
| static void pflash_cfi02_register_types(void) |
| { |
| type_register_static(&pflash_cfi02_info); |
| } |
| |
| type_init(pflash_cfi02_register_types) |
| |
| PFlashCFI02 *pflash_cfi02_register(hwaddr base, |
| const char *name, |
| hwaddr size, |
| BlockBackend *blk, |
| uint32_t sector_len, |
| int nb_mappings, int width, |
| uint16_t id0, uint16_t id1, |
| uint16_t id2, uint16_t id3, |
| uint16_t unlock_addr0, |
| uint16_t unlock_addr1, |
| int be) |
| { |
| DeviceState *dev = qdev_new(TYPE_PFLASH_CFI02); |
| |
| if (blk) { |
| qdev_prop_set_drive(dev, "drive", blk); |
| } |
| assert(QEMU_IS_ALIGNED(size, sector_len)); |
| qdev_prop_set_uint32(dev, "num-blocks", size / sector_len); |
| qdev_prop_set_uint32(dev, "sector-length", sector_len); |
| qdev_prop_set_uint8(dev, "width", width); |
| qdev_prop_set_uint8(dev, "mappings", nb_mappings); |
| qdev_prop_set_uint8(dev, "big-endian", !!be); |
| qdev_prop_set_uint16(dev, "id0", id0); |
| qdev_prop_set_uint16(dev, "id1", id1); |
| qdev_prop_set_uint16(dev, "id2", id2); |
| qdev_prop_set_uint16(dev, "id3", id3); |
| qdev_prop_set_uint16(dev, "unlock-addr0", unlock_addr0); |
| qdev_prop_set_uint16(dev, "unlock-addr1", unlock_addr1); |
| qdev_prop_set_string(dev, "name", name); |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); |
| return PFLASH_CFI02(dev); |
| } |
