| /* |
| * Block layer I/O functions |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "trace.h" |
| #include "block/blockjob.h" |
| #include "block/block_int.h" |
| #include "block/throttle-groups.h" |
| #include "qemu/error-report.h" |
| |
| #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */ |
| |
| static BlockAIOCB *bdrv_aio_readv_em(BlockDriverState *bs, |
| int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, |
| BlockCompletionFunc *cb, void *opaque); |
| static BlockAIOCB *bdrv_aio_writev_em(BlockDriverState *bs, |
| int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, |
| BlockCompletionFunc *cb, void *opaque); |
| static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, |
| QEMUIOVector *iov); |
| static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, |
| QEMUIOVector *iov); |
| static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs, |
| int64_t offset, unsigned int bytes, QEMUIOVector *qiov, |
| BdrvRequestFlags flags); |
| static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs, |
| int64_t offset, unsigned int bytes, QEMUIOVector *qiov, |
| BdrvRequestFlags flags); |
| static BlockAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs, |
| int64_t sector_num, |
| QEMUIOVector *qiov, |
| int nb_sectors, |
| BdrvRequestFlags flags, |
| BlockCompletionFunc *cb, |
| void *opaque, |
| bool is_write); |
| static void coroutine_fn bdrv_co_do_rw(void *opaque); |
| static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, BdrvRequestFlags flags); |
| |
| /* throttling disk I/O limits */ |
| void bdrv_set_io_limits(BlockDriverState *bs, |
| ThrottleConfig *cfg) |
| { |
| int i; |
| |
| throttle_group_config(bs, cfg); |
| |
| for (i = 0; i < 2; i++) { |
| qemu_co_enter_next(&bs->throttled_reqs[i]); |
| } |
| } |
| |
| /* this function drain all the throttled IOs */ |
| static bool bdrv_start_throttled_reqs(BlockDriverState *bs) |
| { |
| bool drained = false; |
| bool enabled = bs->io_limits_enabled; |
| int i; |
| |
| bs->io_limits_enabled = false; |
| |
| for (i = 0; i < 2; i++) { |
| while (qemu_co_enter_next(&bs->throttled_reqs[i])) { |
| drained = true; |
| } |
| } |
| |
| bs->io_limits_enabled = enabled; |
| |
| return drained; |
| } |
| |
| void bdrv_io_limits_disable(BlockDriverState *bs) |
| { |
| bs->io_limits_enabled = false; |
| bdrv_start_throttled_reqs(bs); |
| throttle_group_unregister_bs(bs); |
| } |
| |
| /* should be called before bdrv_set_io_limits if a limit is set */ |
| void bdrv_io_limits_enable(BlockDriverState *bs, const char *group) |
| { |
| assert(!bs->io_limits_enabled); |
| throttle_group_register_bs(bs, group); |
| bs->io_limits_enabled = true; |
| } |
| |
| void bdrv_io_limits_update_group(BlockDriverState *bs, const char *group) |
| { |
| /* this bs is not part of any group */ |
| if (!bs->throttle_state) { |
| return; |
| } |
| |
| /* this bs is a part of the same group than the one we want */ |
| if (!g_strcmp0(throttle_group_get_name(bs), group)) { |
| return; |
| } |
| |
| /* need to change the group this bs belong to */ |
| bdrv_io_limits_disable(bs); |
| bdrv_io_limits_enable(bs, group); |
| } |
| |
| void bdrv_setup_io_funcs(BlockDriver *bdrv) |
| { |
| /* Block drivers without coroutine functions need emulation */ |
| if (!bdrv->bdrv_co_readv) { |
| bdrv->bdrv_co_readv = bdrv_co_readv_em; |
| bdrv->bdrv_co_writev = bdrv_co_writev_em; |
| |
| /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if |
| * the block driver lacks aio we need to emulate that too. |
| */ |
| if (!bdrv->bdrv_aio_readv) { |
| /* add AIO emulation layer */ |
| bdrv->bdrv_aio_readv = bdrv_aio_readv_em; |
| bdrv->bdrv_aio_writev = bdrv_aio_writev_em; |
| } |
| } |
| } |
| |
| void bdrv_refresh_limits(BlockDriverState *bs, Error **errp) |
| { |
| BlockDriver *drv = bs->drv; |
| Error *local_err = NULL; |
| |
| memset(&bs->bl, 0, sizeof(bs->bl)); |
| |
| if (!drv) { |
| return; |
| } |
| |
| /* Take some limits from the children as a default */ |
| if (bs->file) { |
| bdrv_refresh_limits(bs->file, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length; |
| bs->bl.max_transfer_length = bs->file->bl.max_transfer_length; |
| bs->bl.min_mem_alignment = bs->file->bl.min_mem_alignment; |
| bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment; |
| } else { |
| bs->bl.min_mem_alignment = 512; |
| bs->bl.opt_mem_alignment = getpagesize(); |
| } |
| |
| if (bs->backing_hd) { |
| bdrv_refresh_limits(bs->backing_hd, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| bs->bl.opt_transfer_length = |
| MAX(bs->bl.opt_transfer_length, |
| bs->backing_hd->bl.opt_transfer_length); |
| bs->bl.max_transfer_length = |
| MIN_NON_ZERO(bs->bl.max_transfer_length, |
| bs->backing_hd->bl.max_transfer_length); |
| bs->bl.opt_mem_alignment = |
| MAX(bs->bl.opt_mem_alignment, |
| bs->backing_hd->bl.opt_mem_alignment); |
| bs->bl.min_mem_alignment = |
| MAX(bs->bl.min_mem_alignment, |
| bs->backing_hd->bl.min_mem_alignment); |
| } |
| |
| /* Then let the driver override it */ |
| if (drv->bdrv_refresh_limits) { |
| drv->bdrv_refresh_limits(bs, errp); |
| } |
| } |
| |
| /** |
| * The copy-on-read flag is actually a reference count so multiple users may |
| * use the feature without worrying about clobbering its previous state. |
| * Copy-on-read stays enabled until all users have called to disable it. |
| */ |
| void bdrv_enable_copy_on_read(BlockDriverState *bs) |
| { |
| bs->copy_on_read++; |
| } |
| |
| void bdrv_disable_copy_on_read(BlockDriverState *bs) |
| { |
| assert(bs->copy_on_read > 0); |
| bs->copy_on_read--; |
| } |
| |
| /* Check if any requests are in-flight (including throttled requests) */ |
| static bool bdrv_requests_pending(BlockDriverState *bs) |
| { |
| if (!QLIST_EMPTY(&bs->tracked_requests)) { |
| return true; |
| } |
| if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) { |
| return true; |
| } |
| if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) { |
| return true; |
| } |
| if (bs->file && bdrv_requests_pending(bs->file)) { |
| return true; |
| } |
| if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) { |
| return true; |
| } |
| return false; |
| } |
| |
| /* |
| * Wait for pending requests to complete on a single BlockDriverState subtree |
| * |
| * Note that unlike bdrv_drain_all(), the caller must hold the BlockDriverState |
| * AioContext. |
| * |
| * Only this BlockDriverState's AioContext is run, so in-flight requests must |
| * not depend on events in other AioContexts. In that case, use |
| * bdrv_drain_all() instead. |
| */ |
| void bdrv_drain(BlockDriverState *bs) |
| { |
| bool busy = true; |
| |
| while (busy) { |
| /* Keep iterating */ |
| bdrv_flush_io_queue(bs); |
| busy = bdrv_requests_pending(bs); |
| busy |= aio_poll(bdrv_get_aio_context(bs), busy); |
| } |
| } |
| |
| /* |
| * Wait for pending requests to complete across all BlockDriverStates |
| * |
| * This function does not flush data to disk, use bdrv_flush_all() for that |
| * after calling this function. |
| */ |
| void bdrv_drain_all(void) |
| { |
| /* Always run first iteration so any pending completion BHs run */ |
| bool busy = true; |
| BlockDriverState *bs = NULL; |
| GSList *aio_ctxs = NULL, *ctx; |
| |
| while ((bs = bdrv_next(bs))) { |
| AioContext *aio_context = bdrv_get_aio_context(bs); |
| |
| aio_context_acquire(aio_context); |
| if (bs->job) { |
| block_job_pause(bs->job); |
| } |
| aio_context_release(aio_context); |
| |
| if (!g_slist_find(aio_ctxs, aio_context)) { |
| aio_ctxs = g_slist_prepend(aio_ctxs, aio_context); |
| } |
| } |
| |
| /* Note that completion of an asynchronous I/O operation can trigger any |
| * number of other I/O operations on other devices---for example a |
| * coroutine can submit an I/O request to another device in response to |
| * request completion. Therefore we must keep looping until there was no |
| * more activity rather than simply draining each device independently. |
| */ |
| while (busy) { |
| busy = false; |
| |
| for (ctx = aio_ctxs; ctx != NULL; ctx = ctx->next) { |
| AioContext *aio_context = ctx->data; |
| bs = NULL; |
| |
| aio_context_acquire(aio_context); |
| while ((bs = bdrv_next(bs))) { |
| if (aio_context == bdrv_get_aio_context(bs)) { |
| bdrv_flush_io_queue(bs); |
| if (bdrv_requests_pending(bs)) { |
| busy = true; |
| aio_poll(aio_context, busy); |
| } |
| } |
| } |
| busy |= aio_poll(aio_context, false); |
| aio_context_release(aio_context); |
| } |
| } |
| |
| bs = NULL; |
| while ((bs = bdrv_next(bs))) { |
| AioContext *aio_context = bdrv_get_aio_context(bs); |
| |
| aio_context_acquire(aio_context); |
| if (bs->job) { |
| block_job_resume(bs->job); |
| } |
| aio_context_release(aio_context); |
| } |
| g_slist_free(aio_ctxs); |
| } |
| |
| /** |
| * Remove an active request from the tracked requests list |
| * |
| * This function should be called when a tracked request is completing. |
| */ |
| static void tracked_request_end(BdrvTrackedRequest *req) |
| { |
| if (req->serialising) { |
| req->bs->serialising_in_flight--; |
| } |
| |
| QLIST_REMOVE(req, list); |
| qemu_co_queue_restart_all(&req->wait_queue); |
| } |
| |
| /** |
| * Add an active request to the tracked requests list |
| */ |
| static void tracked_request_begin(BdrvTrackedRequest *req, |
| BlockDriverState *bs, |
| int64_t offset, |
| unsigned int bytes, bool is_write) |
| { |
| *req = (BdrvTrackedRequest){ |
| .bs = bs, |
| .offset = offset, |
| .bytes = bytes, |
| .is_write = is_write, |
| .co = qemu_coroutine_self(), |
| .serialising = false, |
| .overlap_offset = offset, |
| .overlap_bytes = bytes, |
| }; |
| |
| qemu_co_queue_init(&req->wait_queue); |
| |
| QLIST_INSERT_HEAD(&bs->tracked_requests, req, list); |
| } |
| |
| static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align) |
| { |
| int64_t overlap_offset = req->offset & ~(align - 1); |
| unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align) |
| - overlap_offset; |
| |
| if (!req->serialising) { |
| req->bs->serialising_in_flight++; |
| req->serialising = true; |
| } |
| |
| req->overlap_offset = MIN(req->overlap_offset, overlap_offset); |
| req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes); |
| } |
| |
| /** |
| * Round a region to cluster boundaries |
| */ |
| void bdrv_round_to_clusters(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, |
| int64_t *cluster_sector_num, |
| int *cluster_nb_sectors) |
| { |
| BlockDriverInfo bdi; |
| |
| if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) { |
| *cluster_sector_num = sector_num; |
| *cluster_nb_sectors = nb_sectors; |
| } else { |
| int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE; |
| *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c); |
| *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num + |
| nb_sectors, c); |
| } |
| } |
| |
| static int bdrv_get_cluster_size(BlockDriverState *bs) |
| { |
| BlockDriverInfo bdi; |
| int ret; |
| |
| ret = bdrv_get_info(bs, &bdi); |
| if (ret < 0 || bdi.cluster_size == 0) { |
| return bs->request_alignment; |
| } else { |
| return bdi.cluster_size; |
| } |
| } |
| |
| static bool tracked_request_overlaps(BdrvTrackedRequest *req, |
| int64_t offset, unsigned int bytes) |
| { |
| /* aaaa bbbb */ |
| if (offset >= req->overlap_offset + req->overlap_bytes) { |
| return false; |
| } |
| /* bbbb aaaa */ |
| if (req->overlap_offset >= offset + bytes) { |
| return false; |
| } |
| return true; |
| } |
| |
| static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self) |
| { |
| BlockDriverState *bs = self->bs; |
| BdrvTrackedRequest *req; |
| bool retry; |
| bool waited = false; |
| |
| if (!bs->serialising_in_flight) { |
| return false; |
| } |
| |
| do { |
| retry = false; |
| QLIST_FOREACH(req, &bs->tracked_requests, list) { |
| if (req == self || (!req->serialising && !self->serialising)) { |
| continue; |
| } |
| if (tracked_request_overlaps(req, self->overlap_offset, |
| self->overlap_bytes)) |
| { |
| /* Hitting this means there was a reentrant request, for |
| * example, a block driver issuing nested requests. This must |
| * never happen since it means deadlock. |
| */ |
| assert(qemu_coroutine_self() != req->co); |
| |
| /* If the request is already (indirectly) waiting for us, or |
| * will wait for us as soon as it wakes up, then just go on |
| * (instead of producing a deadlock in the former case). */ |
| if (!req->waiting_for) { |
| self->waiting_for = req; |
| qemu_co_queue_wait(&req->wait_queue); |
| self->waiting_for = NULL; |
| retry = true; |
| waited = true; |
| break; |
| } |
| } |
| } |
| } while (retry); |
| |
| return waited; |
| } |
| |
| static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset, |
| size_t size) |
| { |
| if (size > BDRV_REQUEST_MAX_SECTORS << BDRV_SECTOR_BITS) { |
| return -EIO; |
| } |
| |
| if (!bdrv_is_inserted(bs)) { |
| return -ENOMEDIUM; |
| } |
| |
| if (offset < 0) { |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num, |
| int nb_sectors) |
| { |
| if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) { |
| return -EIO; |
| } |
| |
| return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE, |
| nb_sectors * BDRV_SECTOR_SIZE); |
| } |
| |
| typedef struct RwCo { |
| BlockDriverState *bs; |
| int64_t offset; |
| QEMUIOVector *qiov; |
| bool is_write; |
| int ret; |
| BdrvRequestFlags flags; |
| } RwCo; |
| |
| static void coroutine_fn bdrv_rw_co_entry(void *opaque) |
| { |
| RwCo *rwco = opaque; |
| |
| if (!rwco->is_write) { |
| rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset, |
| rwco->qiov->size, rwco->qiov, |
| rwco->flags); |
| } else { |
| rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset, |
| rwco->qiov->size, rwco->qiov, |
| rwco->flags); |
| } |
| } |
| |
| /* |
| * Process a vectored synchronous request using coroutines |
| */ |
| static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset, |
| QEMUIOVector *qiov, bool is_write, |
| BdrvRequestFlags flags) |
| { |
| Coroutine *co; |
| RwCo rwco = { |
| .bs = bs, |
| .offset = offset, |
| .qiov = qiov, |
| .is_write = is_write, |
| .ret = NOT_DONE, |
| .flags = flags, |
| }; |
| |
| /** |
| * In sync call context, when the vcpu is blocked, this throttling timer |
| * will not fire; so the I/O throttling function has to be disabled here |
| * if it has been enabled. |
| */ |
| if (bs->io_limits_enabled) { |
| fprintf(stderr, "Disabling I/O throttling on '%s' due " |
| "to synchronous I/O.\n", bdrv_get_device_name(bs)); |
| bdrv_io_limits_disable(bs); |
| } |
| |
| if (qemu_in_coroutine()) { |
| /* Fast-path if already in coroutine context */ |
| bdrv_rw_co_entry(&rwco); |
| } else { |
| AioContext *aio_context = bdrv_get_aio_context(bs); |
| |
| co = qemu_coroutine_create(bdrv_rw_co_entry); |
| qemu_coroutine_enter(co, &rwco); |
| while (rwco.ret == NOT_DONE) { |
| aio_poll(aio_context, true); |
| } |
| } |
| return rwco.ret; |
| } |
| |
| /* |
| * Process a synchronous request using coroutines |
| */ |
| static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf, |
| int nb_sectors, bool is_write, BdrvRequestFlags flags) |
| { |
| QEMUIOVector qiov; |
| struct iovec iov = { |
| .iov_base = (void *)buf, |
| .iov_len = nb_sectors * BDRV_SECTOR_SIZE, |
| }; |
| |
| if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) { |
| return -EINVAL; |
| } |
| |
| qemu_iovec_init_external(&qiov, &iov, 1); |
| return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS, |
| &qiov, is_write, flags); |
| } |
| |
| /* return < 0 if error. See bdrv_write() for the return codes */ |
| int bdrv_read(BlockDriverState *bs, int64_t sector_num, |
| uint8_t *buf, int nb_sectors) |
| { |
| return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0); |
| } |
| |
| /* Just like bdrv_read(), but with I/O throttling temporarily disabled */ |
| int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num, |
| uint8_t *buf, int nb_sectors) |
| { |
| bool enabled; |
| int ret; |
| |
| enabled = bs->io_limits_enabled; |
| bs->io_limits_enabled = false; |
| ret = bdrv_read(bs, sector_num, buf, nb_sectors); |
| bs->io_limits_enabled = enabled; |
| return ret; |
| } |
| |
| /* Return < 0 if error. Important errors are: |
| -EIO generic I/O error (may happen for all errors) |
| -ENOMEDIUM No media inserted. |
| -EINVAL Invalid sector number or nb_sectors |
| -EACCES Trying to write a read-only device |
| */ |
| int bdrv_write(BlockDriverState *bs, int64_t sector_num, |
| const uint8_t *buf, int nb_sectors) |
| { |
| return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0); |
| } |
| |
| int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num, |
| int nb_sectors, BdrvRequestFlags flags) |
| { |
| return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true, |
| BDRV_REQ_ZERO_WRITE | flags); |
| } |
| |
| /* |
| * Completely zero out a block device with the help of bdrv_write_zeroes. |
| * The operation is sped up by checking the block status and only writing |
| * zeroes to the device if they currently do not return zeroes. Optional |
| * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP). |
| * |
| * Returns < 0 on error, 0 on success. For error codes see bdrv_write(). |
| */ |
| int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags) |
| { |
| int64_t target_sectors, ret, nb_sectors, sector_num = 0; |
| int n; |
| |
| target_sectors = bdrv_nb_sectors(bs); |
| if (target_sectors < 0) { |
| return target_sectors; |
| } |
| |
| for (;;) { |
| nb_sectors = MIN(target_sectors - sector_num, BDRV_REQUEST_MAX_SECTORS); |
| if (nb_sectors <= 0) { |
| return 0; |
| } |
| ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n); |
| if (ret < 0) { |
| error_report("error getting block status at sector %" PRId64 ": %s", |
| sector_num, strerror(-ret)); |
| return ret; |
| } |
| if (ret & BDRV_BLOCK_ZERO) { |
| sector_num += n; |
| continue; |
| } |
| ret = bdrv_write_zeroes(bs, sector_num, n, flags); |
| if (ret < 0) { |
| error_report("error writing zeroes at sector %" PRId64 ": %s", |
| sector_num, strerror(-ret)); |
| return ret; |
| } |
| sector_num += n; |
| } |
| } |
| |
| int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes) |
| { |
| QEMUIOVector qiov; |
| struct iovec iov = { |
| .iov_base = (void *)buf, |
| .iov_len = bytes, |
| }; |
| int ret; |
| |
| if (bytes < 0) { |
| return -EINVAL; |
| } |
| |
| qemu_iovec_init_external(&qiov, &iov, 1); |
| ret = bdrv_prwv_co(bs, offset, &qiov, false, 0); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| return bytes; |
| } |
| |
| int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov) |
| { |
| int ret; |
| |
| ret = bdrv_prwv_co(bs, offset, qiov, true, 0); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| return qiov->size; |
| } |
| |
| int bdrv_pwrite(BlockDriverState *bs, int64_t offset, |
| const void *buf, int bytes) |
| { |
| QEMUIOVector qiov; |
| struct iovec iov = { |
| .iov_base = (void *) buf, |
| .iov_len = bytes, |
| }; |
| |
| if (bytes < 0) { |
| return -EINVAL; |
| } |
| |
| qemu_iovec_init_external(&qiov, &iov, 1); |
| return bdrv_pwritev(bs, offset, &qiov); |
| } |
| |
| /* |
| * Writes to the file and ensures that no writes are reordered across this |
| * request (acts as a barrier) |
| * |
| * Returns 0 on success, -errno in error cases. |
| */ |
| int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset, |
| const void *buf, int count) |
| { |
| int ret; |
| |
| ret = bdrv_pwrite(bs, offset, buf, count); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| /* No flush needed for cache modes that already do it */ |
| if (bs->enable_write_cache) { |
| bdrv_flush(bs); |
| } |
| |
| return 0; |
| } |
| |
| static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, QEMUIOVector *qiov) |
| { |
| /* Perform I/O through a temporary buffer so that users who scribble over |
| * their read buffer while the operation is in progress do not end up |
| * modifying the image file. This is critical for zero-copy guest I/O |
| * where anything might happen inside guest memory. |
| */ |
| void *bounce_buffer; |
| |
| BlockDriver *drv = bs->drv; |
| struct iovec iov; |
| QEMUIOVector bounce_qiov; |
| int64_t cluster_sector_num; |
| int cluster_nb_sectors; |
| size_t skip_bytes; |
| int ret; |
| |
| /* Cover entire cluster so no additional backing file I/O is required when |
| * allocating cluster in the image file. |
| */ |
| bdrv_round_to_clusters(bs, sector_num, nb_sectors, |
| &cluster_sector_num, &cluster_nb_sectors); |
| |
| trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, |
| cluster_sector_num, cluster_nb_sectors); |
| |
| iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE; |
| iov.iov_base = bounce_buffer = qemu_try_blockalign(bs, iov.iov_len); |
| if (bounce_buffer == NULL) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| qemu_iovec_init_external(&bounce_qiov, &iov, 1); |
| |
| ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors, |
| &bounce_qiov); |
| if (ret < 0) { |
| goto err; |
| } |
| |
| if (drv->bdrv_co_write_zeroes && |
| buffer_is_zero(bounce_buffer, iov.iov_len)) { |
| ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num, |
| cluster_nb_sectors, 0); |
| } else { |
| /* This does not change the data on the disk, it is not necessary |
| * to flush even in cache=writethrough mode. |
| */ |
| ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors, |
| &bounce_qiov); |
| } |
| |
| if (ret < 0) { |
| /* It might be okay to ignore write errors for guest requests. If this |
| * is a deliberate copy-on-read then we don't want to ignore the error. |
| * Simply report it in all cases. |
| */ |
| goto err; |
| } |
| |
| skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE; |
| qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes, |
| nb_sectors * BDRV_SECTOR_SIZE); |
| |
| err: |
| qemu_vfree(bounce_buffer); |
| return ret; |
| } |
| |
| /* |
| * Forwards an already correctly aligned request to the BlockDriver. This |
| * handles copy on read and zeroing after EOF; any other features must be |
| * implemented by the caller. |
| */ |
| static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs, |
| BdrvTrackedRequest *req, int64_t offset, unsigned int bytes, |
| int64_t align, QEMUIOVector *qiov, int flags) |
| { |
| BlockDriver *drv = bs->drv; |
| int ret; |
| |
| int64_t sector_num = offset >> BDRV_SECTOR_BITS; |
| unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS; |
| |
| assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0); |
| assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0); |
| assert(!qiov || bytes == qiov->size); |
| |
| /* Handle Copy on Read and associated serialisation */ |
| if (flags & BDRV_REQ_COPY_ON_READ) { |
| /* If we touch the same cluster it counts as an overlap. This |
| * guarantees that allocating writes will be serialized and not race |
| * with each other for the same cluster. For example, in copy-on-read |
| * it ensures that the CoR read and write operations are atomic and |
| * guest writes cannot interleave between them. */ |
| mark_request_serialising(req, bdrv_get_cluster_size(bs)); |
| } |
| |
| wait_serialising_requests(req); |
| |
| if (flags & BDRV_REQ_COPY_ON_READ) { |
| int pnum; |
| |
| ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum); |
| if (ret < 0) { |
| goto out; |
| } |
| |
| if (!ret || pnum != nb_sectors) { |
| ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov); |
| goto out; |
| } |
| } |
| |
| /* Forward the request to the BlockDriver */ |
| if (!bs->zero_beyond_eof) { |
| ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov); |
| } else { |
| /* Read zeros after EOF */ |
| int64_t total_sectors, max_nb_sectors; |
| |
| total_sectors = bdrv_nb_sectors(bs); |
| if (total_sectors < 0) { |
| ret = total_sectors; |
| goto out; |
| } |
| |
| max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num), |
| align >> BDRV_SECTOR_BITS); |
| if (nb_sectors < max_nb_sectors) { |
| ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov); |
| } else if (max_nb_sectors > 0) { |
| QEMUIOVector local_qiov; |
| |
| qemu_iovec_init(&local_qiov, qiov->niov); |
| qemu_iovec_concat(&local_qiov, qiov, 0, |
| max_nb_sectors * BDRV_SECTOR_SIZE); |
| |
| ret = drv->bdrv_co_readv(bs, sector_num, max_nb_sectors, |
| &local_qiov); |
| |
| qemu_iovec_destroy(&local_qiov); |
| } else { |
| ret = 0; |
| } |
| |
| /* Reading beyond end of file is supposed to produce zeroes */ |
| if (ret == 0 && total_sectors < sector_num + nb_sectors) { |
| uint64_t offset = MAX(0, total_sectors - sector_num); |
| uint64_t bytes = (sector_num + nb_sectors - offset) * |
| BDRV_SECTOR_SIZE; |
| qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes); |
| } |
| } |
| |
| out: |
| return ret; |
| } |
| |
| /* |
| * Handle a read request in coroutine context |
| */ |
| static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs, |
| int64_t offset, unsigned int bytes, QEMUIOVector *qiov, |
| BdrvRequestFlags flags) |
| { |
| BlockDriver *drv = bs->drv; |
| BdrvTrackedRequest req; |
| |
| /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */ |
| uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment); |
| uint8_t *head_buf = NULL; |
| uint8_t *tail_buf = NULL; |
| QEMUIOVector local_qiov; |
| bool use_local_qiov = false; |
| int ret; |
| |
| if (!drv) { |
| return -ENOMEDIUM; |
| } |
| |
| ret = bdrv_check_byte_request(bs, offset, bytes); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| /* Don't do copy-on-read if we read data before write operation */ |
| if (bs->copy_on_read && !(flags & BDRV_REQ_NO_COPY_ON_READ)) { |
| flags |= BDRV_REQ_COPY_ON_READ; |
| } |
| |
| /* throttling disk I/O */ |
| if (bs->io_limits_enabled) { |
| throttle_group_co_io_limits_intercept(bs, bytes, false); |
| } |
| |
| /* Align read if necessary by padding qiov */ |
| if (offset & (align - 1)) { |
| head_buf = qemu_blockalign(bs, align); |
| qemu_iovec_init(&local_qiov, qiov->niov + 2); |
| qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1)); |
| qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size); |
| use_local_qiov = true; |
| |
| bytes += offset & (align - 1); |
| offset = offset & ~(align - 1); |
| } |
| |
| if ((offset + bytes) & (align - 1)) { |
| if (!use_local_qiov) { |
| qemu_iovec_init(&local_qiov, qiov->niov + 1); |
| qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size); |
| use_local_qiov = true; |
| } |
| tail_buf = qemu_blockalign(bs, align); |
| qemu_iovec_add(&local_qiov, tail_buf, |
| align - ((offset + bytes) & (align - 1))); |
| |
| bytes = ROUND_UP(bytes, align); |
| } |
| |
| tracked_request_begin(&req, bs, offset, bytes, false); |
| ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align, |
| use_local_qiov ? &local_qiov : qiov, |
| flags); |
| tracked_request_end(&req); |
| |
| if (use_local_qiov) { |
| qemu_iovec_destroy(&local_qiov); |
| qemu_vfree(head_buf); |
| qemu_vfree(tail_buf); |
| } |
| |
| return ret; |
| } |
| |
| static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, QEMUIOVector *qiov, |
| BdrvRequestFlags flags) |
| { |
| if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) { |
| return -EINVAL; |
| } |
| |
| return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS, |
| nb_sectors << BDRV_SECTOR_BITS, qiov, flags); |
| } |
| |
| int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num, |
| int nb_sectors, QEMUIOVector *qiov) |
| { |
| trace_bdrv_co_readv(bs, sector_num, nb_sectors); |
| |
| return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0); |
| } |
| |
| int coroutine_fn bdrv_co_no_copy_on_readv(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, QEMUIOVector *qiov) |
| { |
| trace_bdrv_co_no_copy_on_readv(bs, sector_num, nb_sectors); |
| |
| return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, |
| BDRV_REQ_NO_COPY_ON_READ); |
| } |
| |
| int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, QEMUIOVector *qiov) |
| { |
| trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors); |
| |
| return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, |
| BDRV_REQ_COPY_ON_READ); |
| } |
| |
| #define MAX_WRITE_ZEROES_BOUNCE_BUFFER 32768 |
| |
| static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, BdrvRequestFlags flags) |
| { |
| BlockDriver *drv = bs->drv; |
| QEMUIOVector qiov; |
| struct iovec iov = {0}; |
| int ret = 0; |
| |
| int max_write_zeroes = MIN_NON_ZERO(bs->bl.max_write_zeroes, |
| BDRV_REQUEST_MAX_SECTORS); |
| |
| while (nb_sectors > 0 && !ret) { |
| int num = nb_sectors; |
| |
| /* Align request. Block drivers can expect the "bulk" of the request |
| * to be aligned. |
| */ |
| if (bs->bl.write_zeroes_alignment |
| && num > bs->bl.write_zeroes_alignment) { |
| if (sector_num % bs->bl.write_zeroes_alignment != 0) { |
| /* Make a small request up to the first aligned sector. */ |
| num = bs->bl.write_zeroes_alignment; |
| num -= sector_num % bs->bl.write_zeroes_alignment; |
| } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) { |
| /* Shorten the request to the last aligned sector. num cannot |
| * underflow because num > bs->bl.write_zeroes_alignment. |
| */ |
| num -= (sector_num + num) % bs->bl.write_zeroes_alignment; |
| } |
| } |
| |
| /* limit request size */ |
| if (num > max_write_zeroes) { |
| num = max_write_zeroes; |
| } |
| |
| ret = -ENOTSUP; |
| /* First try the efficient write zeroes operation */ |
| if (drv->bdrv_co_write_zeroes) { |
| ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags); |
| } |
| |
| if (ret == -ENOTSUP) { |
| /* Fall back to bounce buffer if write zeroes is unsupported */ |
| int max_xfer_len = MIN_NON_ZERO(bs->bl.max_transfer_length, |
| MAX_WRITE_ZEROES_BOUNCE_BUFFER); |
| num = MIN(num, max_xfer_len); |
| iov.iov_len = num * BDRV_SECTOR_SIZE; |
| if (iov.iov_base == NULL) { |
| iov.iov_base = qemu_try_blockalign(bs, num * BDRV_SECTOR_SIZE); |
| if (iov.iov_base == NULL) { |
| ret = -ENOMEM; |
| goto fail; |
| } |
| memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE); |
| } |
| qemu_iovec_init_external(&qiov, &iov, 1); |
| |
| ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov); |
| |
| /* Keep bounce buffer around if it is big enough for all |
| * all future requests. |
| */ |
| if (num < max_xfer_len) { |
| qemu_vfree(iov.iov_base); |
| iov.iov_base = NULL; |
| } |
| } |
| |
| sector_num += num; |
| nb_sectors -= num; |
| } |
| |
| fail: |
| qemu_vfree(iov.iov_base); |
| return ret; |
| } |
| |
| /* |
| * Forwards an already correctly aligned write request to the BlockDriver. |
| */ |
| static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs, |
| BdrvTrackedRequest *req, int64_t offset, unsigned int bytes, |
| QEMUIOVector *qiov, int flags) |
| { |
| BlockDriver *drv = bs->drv; |
| bool waited; |
| int ret; |
| |
| int64_t sector_num = offset >> BDRV_SECTOR_BITS; |
| unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS; |
| |
| assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0); |
| assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0); |
| assert(!qiov || bytes == qiov->size); |
| |
| waited = wait_serialising_requests(req); |
| assert(!waited || !req->serialising); |
| assert(req->overlap_offset <= offset); |
| assert(offset + bytes <= req->overlap_offset + req->overlap_bytes); |
| |
| ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req); |
| |
| if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF && |
| !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_write_zeroes && |
| qemu_iovec_is_zero(qiov)) { |
| flags |= BDRV_REQ_ZERO_WRITE; |
| if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) { |
| flags |= BDRV_REQ_MAY_UNMAP; |
| } |
| } |
| |
| if (ret < 0) { |
| /* Do nothing, write notifier decided to fail this request */ |
| } else if (flags & BDRV_REQ_ZERO_WRITE) { |
| BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO); |
| ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags); |
| } else { |
| BLKDBG_EVENT(bs, BLKDBG_PWRITEV); |
| ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov); |
| } |
| BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE); |
| |
| if (ret == 0 && !bs->enable_write_cache) { |
| ret = bdrv_co_flush(bs); |
| } |
| |
| bdrv_set_dirty(bs, sector_num, nb_sectors); |
| |
| block_acct_highest_sector(&bs->stats, sector_num, nb_sectors); |
| |
| if (ret >= 0) { |
| bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors); |
| } |
| |
| return ret; |
| } |
| |
| static int coroutine_fn bdrv_co_do_zero_pwritev(BlockDriverState *bs, |
| int64_t offset, |
| unsigned int bytes, |
| BdrvRequestFlags flags, |
| BdrvTrackedRequest *req) |
| { |
| uint8_t *buf = NULL; |
| QEMUIOVector local_qiov; |
| struct iovec iov; |
| uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment); |
| unsigned int head_padding_bytes, tail_padding_bytes; |
| int ret = 0; |
| |
| head_padding_bytes = offset & (align - 1); |
| tail_padding_bytes = align - ((offset + bytes) & (align - 1)); |
| |
| |
| assert(flags & BDRV_REQ_ZERO_WRITE); |
| if (head_padding_bytes || tail_padding_bytes) { |
| buf = qemu_blockalign(bs, align); |
| iov = (struct iovec) { |
| .iov_base = buf, |
| .iov_len = align, |
| }; |
| qemu_iovec_init_external(&local_qiov, &iov, 1); |
| } |
| if (head_padding_bytes) { |
| uint64_t zero_bytes = MIN(bytes, align - head_padding_bytes); |
| |
| /* RMW the unaligned part before head. */ |
| mark_request_serialising(req, align); |
| wait_serialising_requests(req); |
| BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD); |
| ret = bdrv_aligned_preadv(bs, req, offset & ~(align - 1), align, |
| align, &local_qiov, 0); |
| if (ret < 0) { |
| goto fail; |
| } |
| BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD); |
| |
| memset(buf + head_padding_bytes, 0, zero_bytes); |
| ret = bdrv_aligned_pwritev(bs, req, offset & ~(align - 1), align, |
| &local_qiov, |
| flags & ~BDRV_REQ_ZERO_WRITE); |
| if (ret < 0) { |
| goto fail; |
| } |
| offset += zero_bytes; |
| bytes -= zero_bytes; |
| } |
| |
| assert(!bytes || (offset & (align - 1)) == 0); |
| if (bytes >= align) { |
| /* Write the aligned part in the middle. */ |
| uint64_t aligned_bytes = bytes & ~(align - 1); |
| ret = bdrv_aligned_pwritev(bs, req, offset, aligned_bytes, |
| NULL, flags); |
| if (ret < 0) { |
| goto fail; |
| } |
| bytes -= aligned_bytes; |
| offset += aligned_bytes; |
| } |
| |
| assert(!bytes || (offset & (align - 1)) == 0); |
| if (bytes) { |
| assert(align == tail_padding_bytes + bytes); |
| /* RMW the unaligned part after tail. */ |
| mark_request_serialising(req, align); |
| wait_serialising_requests(req); |
| BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL); |
| ret = bdrv_aligned_preadv(bs, req, offset, align, |
| align, &local_qiov, 0); |
| if (ret < 0) { |
| goto fail; |
| } |
| BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL); |
| |
| memset(buf, 0, bytes); |
| ret = bdrv_aligned_pwritev(bs, req, offset, align, |
| &local_qiov, flags & ~BDRV_REQ_ZERO_WRITE); |
| } |
| fail: |
| qemu_vfree(buf); |
| return ret; |
| |
| } |
| |
| /* |
| * Handle a write request in coroutine context |
| */ |
| static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs, |
| int64_t offset, unsigned int bytes, QEMUIOVector *qiov, |
| BdrvRequestFlags flags) |
| { |
| BdrvTrackedRequest req; |
| /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */ |
| uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment); |
| uint8_t *head_buf = NULL; |
| uint8_t *tail_buf = NULL; |
| QEMUIOVector local_qiov; |
| bool use_local_qiov = false; |
| int ret; |
| |
| if (!bs->drv) { |
| return -ENOMEDIUM; |
| } |
| if (bs->read_only) { |
| return -EPERM; |
| } |
| |
| ret = bdrv_check_byte_request(bs, offset, bytes); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| /* throttling disk I/O */ |
| if (bs->io_limits_enabled) { |
| throttle_group_co_io_limits_intercept(bs, bytes, true); |
| } |
| |
| /* |
| * Align write if necessary by performing a read-modify-write cycle. |
| * Pad qiov with the read parts and be sure to have a tracked request not |
| * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle. |
| */ |
| tracked_request_begin(&req, bs, offset, bytes, true); |
| |
| if (!qiov) { |
| ret = bdrv_co_do_zero_pwritev(bs, offset, bytes, flags, &req); |
| goto out; |
| } |
| |
| if (offset & (align - 1)) { |
| QEMUIOVector head_qiov; |
| struct iovec head_iov; |
| |
| mark_request_serialising(&req, align); |
| wait_serialising_requests(&req); |
| |
| head_buf = qemu_blockalign(bs, align); |
| head_iov = (struct iovec) { |
| .iov_base = head_buf, |
| .iov_len = align, |
| }; |
| qemu_iovec_init_external(&head_qiov, &head_iov, 1); |
| |
| BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD); |
| ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align, |
| align, &head_qiov, 0); |
| if (ret < 0) { |
| goto fail; |
| } |
| BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD); |
| |
| qemu_iovec_init(&local_qiov, qiov->niov + 2); |
| qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1)); |
| qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size); |
| use_local_qiov = true; |
| |
| bytes += offset & (align - 1); |
| offset = offset & ~(align - 1); |
| } |
| |
| if ((offset + bytes) & (align - 1)) { |
| QEMUIOVector tail_qiov; |
| struct iovec tail_iov; |
| size_t tail_bytes; |
| bool waited; |
| |
| mark_request_serialising(&req, align); |
| waited = wait_serialising_requests(&req); |
| assert(!waited || !use_local_qiov); |
| |
| tail_buf = qemu_blockalign(bs, align); |
| tail_iov = (struct iovec) { |
| .iov_base = tail_buf, |
| .iov_len = align, |
| }; |
| qemu_iovec_init_external(&tail_qiov, &tail_iov, 1); |
| |
| BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL); |
| ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align, |
| align, &tail_qiov, 0); |
| if (ret < 0) { |
| goto fail; |
| } |
| BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL); |
| |
| if (!use_local_qiov) { |
| qemu_iovec_init(&local_qiov, qiov->niov + 1); |
| qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size); |
| use_local_qiov = true; |
| } |
| |
| tail_bytes = (offset + bytes) & (align - 1); |
| qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes); |
| |
| bytes = ROUND_UP(bytes, align); |
| } |
| |
| ret = bdrv_aligned_pwritev(bs, &req, offset, bytes, |
| use_local_qiov ? &local_qiov : qiov, |
| flags); |
| |
| fail: |
| |
| if (use_local_qiov) { |
| qemu_iovec_destroy(&local_qiov); |
| } |
| qemu_vfree(head_buf); |
| qemu_vfree(tail_buf); |
| out: |
| tracked_request_end(&req); |
| return ret; |
| } |
| |
| static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, QEMUIOVector *qiov, |
| BdrvRequestFlags flags) |
| { |
| if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) { |
| return -EINVAL; |
| } |
| |
| return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS, |
| nb_sectors << BDRV_SECTOR_BITS, qiov, flags); |
| } |
| |
| int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num, |
| int nb_sectors, QEMUIOVector *qiov) |
| { |
| trace_bdrv_co_writev(bs, sector_num, nb_sectors); |
| |
| return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0); |
| } |
| |
| int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, |
| BdrvRequestFlags flags) |
| { |
| trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags); |
| |
| if (!(bs->open_flags & BDRV_O_UNMAP)) { |
| flags &= ~BDRV_REQ_MAY_UNMAP; |
| } |
| |
| return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL, |
| BDRV_REQ_ZERO_WRITE | flags); |
| } |
| |
| int bdrv_flush_all(void) |
| { |
| BlockDriverState *bs = NULL; |
| int result = 0; |
| |
| while ((bs = bdrv_next(bs))) { |
| AioContext *aio_context = bdrv_get_aio_context(bs); |
| int ret; |
| |
| aio_context_acquire(aio_context); |
| ret = bdrv_flush(bs); |
| if (ret < 0 && !result) { |
| result = ret; |
| } |
| aio_context_release(aio_context); |
| } |
| |
| return result; |
| } |
| |
| typedef struct BdrvCoGetBlockStatusData { |
| BlockDriverState *bs; |
| BlockDriverState *base; |
| int64_t sector_num; |
| int nb_sectors; |
| int *pnum; |
| int64_t ret; |
| bool done; |
| } BdrvCoGetBlockStatusData; |
| |
| /* |
| * Returns the allocation status of the specified sectors. |
| * Drivers not implementing the functionality are assumed to not support |
| * backing files, hence all their sectors are reported as allocated. |
| * |
| * If 'sector_num' is beyond the end of the disk image the return value is 0 |
| * and 'pnum' is set to 0. |
| * |
| * 'pnum' is set to the number of sectors (including and immediately following |
| * the specified sector) that are known to be in the same |
| * allocated/unallocated state. |
| * |
| * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes |
| * beyond the end of the disk image it will be clamped. |
| */ |
| static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs, |
| int64_t sector_num, |
| int nb_sectors, int *pnum) |
| { |
| int64_t total_sectors; |
| int64_t n; |
| int64_t ret, ret2; |
| |
| total_sectors = bdrv_nb_sectors(bs); |
| if (total_sectors < 0) { |
| return total_sectors; |
| } |
| |
| if (sector_num >= total_sectors) { |
| *pnum = 0; |
| return 0; |
| } |
| |
| n = total_sectors - sector_num; |
| if (n < nb_sectors) { |
| nb_sectors = n; |
| } |
| |
| if (!bs->drv->bdrv_co_get_block_status) { |
| *pnum = nb_sectors; |
| ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED; |
| if (bs->drv->protocol_name) { |
| ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE); |
| } |
| return ret; |
| } |
| |
| ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum); |
| if (ret < 0) { |
| *pnum = 0; |
| return ret; |
| } |
| |
| if (ret & BDRV_BLOCK_RAW) { |
| assert(ret & BDRV_BLOCK_OFFSET_VALID); |
| return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS, |
| *pnum, pnum); |
| } |
| |
| if (ret & (BDRV_BLOCK_DATA | BDRV_BLOCK_ZERO)) { |
| ret |= BDRV_BLOCK_ALLOCATED; |
| } else { |
| if (bdrv_unallocated_blocks_are_zero(bs)) { |
| ret |= BDRV_BLOCK_ZERO; |
| } else if (bs->backing_hd) { |
| BlockDriverState *bs2 = bs->backing_hd; |
| int64_t nb_sectors2 = bdrv_nb_sectors(bs2); |
| if (nb_sectors2 >= 0 && sector_num >= nb_sectors2) { |
| ret |= BDRV_BLOCK_ZERO; |
| } |
| } |
| } |
| |
| if (bs->file && |
| (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) && |
| (ret & BDRV_BLOCK_OFFSET_VALID)) { |
| int file_pnum; |
| |
| ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS, |
| *pnum, &file_pnum); |
| if (ret2 >= 0) { |
| /* Ignore errors. This is just providing extra information, it |
| * is useful but not necessary. |
| */ |
| if (!file_pnum) { |
| /* !file_pnum indicates an offset at or beyond the EOF; it is |
| * perfectly valid for the format block driver to point to such |
| * offsets, so catch it and mark everything as zero */ |
| ret |= BDRV_BLOCK_ZERO; |
| } else { |
| /* Limit request to the range reported by the protocol driver */ |
| *pnum = file_pnum; |
| ret |= (ret2 & BDRV_BLOCK_ZERO); |
| } |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int64_t coroutine_fn bdrv_co_get_block_status_above(BlockDriverState *bs, |
| BlockDriverState *base, |
| int64_t sector_num, |
| int nb_sectors, |
| int *pnum) |
| { |
| BlockDriverState *p; |
| int64_t ret = 0; |
| |
| assert(bs != base); |
| for (p = bs; p != base; p = p->backing_hd) { |
| ret = bdrv_co_get_block_status(p, sector_num, nb_sectors, pnum); |
| if (ret < 0 || ret & BDRV_BLOCK_ALLOCATED) { |
| break; |
| } |
| /* [sector_num, pnum] unallocated on this layer, which could be only |
| * the first part of [sector_num, nb_sectors]. */ |
| nb_sectors = MIN(nb_sectors, *pnum); |
| } |
| return ret; |
| } |
| |
| /* Coroutine wrapper for bdrv_get_block_status_above() */ |
| static void coroutine_fn bdrv_get_block_status_above_co_entry(void *opaque) |
| { |
| BdrvCoGetBlockStatusData *data = opaque; |
| |
| data->ret = bdrv_co_get_block_status_above(data->bs, data->base, |
| data->sector_num, |
| data->nb_sectors, |
| data->pnum); |
| data->done = true; |
| } |
| |
| /* |
| * Synchronous wrapper around bdrv_co_get_block_status_above(). |
| * |
| * See bdrv_co_get_block_status_above() for details. |
| */ |
| int64_t bdrv_get_block_status_above(BlockDriverState *bs, |
| BlockDriverState *base, |
| int64_t sector_num, |
| int nb_sectors, int *pnum) |
| { |
| Coroutine *co; |
| BdrvCoGetBlockStatusData data = { |
| .bs = bs, |
| .base = base, |
| .sector_num = sector_num, |
| .nb_sectors = nb_sectors, |
| .pnum = pnum, |
| .done = false, |
| }; |
| |
| if (qemu_in_coroutine()) { |
| /* Fast-path if already in coroutine context */ |
| bdrv_get_block_status_above_co_entry(&data); |
| } else { |
| AioContext *aio_context = bdrv_get_aio_context(bs); |
| |
| co = qemu_coroutine_create(bdrv_get_block_status_above_co_entry); |
| qemu_coroutine_enter(co, &data); |
| while (!data.done) { |
| aio_poll(aio_context, true); |
| } |
| } |
| return data.ret; |
| } |
| |
| int64_t bdrv_get_block_status(BlockDriverState *bs, |
| int64_t sector_num, |
| int nb_sectors, int *pnum) |
| { |
| return bdrv_get_block_status_above(bs, bs->backing_hd, |
| sector_num, nb_sectors, pnum); |
| } |
| |
| int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, |
| int nb_sectors, int *pnum) |
| { |
| int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum); |
| if (ret < 0) { |
| return ret; |
| } |
| return !!(ret & BDRV_BLOCK_ALLOCATED); |
| } |
| |
| /* |
| * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP] |
| * |
| * Return true if the given sector is allocated in any image between |
| * BASE and TOP (inclusive). BASE can be NULL to check if the given |
| * sector is allocated in any image of the chain. Return false otherwise. |
| * |
| * 'pnum' is set to the number of sectors (including and immediately following |
| * the specified sector) that are known to be in the same |
| * allocated/unallocated state. |
| * |
| */ |
| int bdrv_is_allocated_above(BlockDriverState *top, |
| BlockDriverState *base, |
| int64_t sector_num, |
| int nb_sectors, int *pnum) |
| { |
| BlockDriverState *intermediate; |
| int ret, n = nb_sectors; |
| |
| intermediate = top; |
| while (intermediate && intermediate != base) { |
| int pnum_inter; |
| ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors, |
| &pnum_inter); |
| if (ret < 0) { |
| return ret; |
| } else if (ret) { |
| *pnum = pnum_inter; |
| return 1; |
| } |
| |
| /* |
| * [sector_num, nb_sectors] is unallocated on top but intermediate |
| * might have |
| * |
| * [sector_num+x, nr_sectors] allocated. |
| */ |
| if (n > pnum_inter && |
| (intermediate == top || |
| sector_num + pnum_inter < intermediate->total_sectors)) { |
| n = pnum_inter; |
| } |
| |
| intermediate = intermediate->backing_hd; |
| } |
| |
| *pnum = n; |
| return 0; |
| } |
| |
| int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num, |
| const uint8_t *buf, int nb_sectors) |
| { |
| BlockDriver *drv = bs->drv; |
| int ret; |
| |
| if (!drv) { |
| return -ENOMEDIUM; |
| } |
| if (!drv->bdrv_write_compressed) { |
| return -ENOTSUP; |
| } |
| ret = bdrv_check_request(bs, sector_num, nb_sectors); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| assert(QLIST_EMPTY(&bs->dirty_bitmaps)); |
| |
| return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors); |
| } |
| |
| int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf, |
| int64_t pos, int size) |
| { |
| QEMUIOVector qiov; |
| struct iovec iov = { |
| .iov_base = (void *) buf, |
| .iov_len = size, |
| }; |
| |
| qemu_iovec_init_external(&qiov, &iov, 1); |
| return bdrv_writev_vmstate(bs, &qiov, pos); |
| } |
| |
| int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos) |
| { |
| BlockDriver *drv = bs->drv; |
| |
| if (!drv) { |
| return -ENOMEDIUM; |
| } else if (drv->bdrv_save_vmstate) { |
| return drv->bdrv_save_vmstate(bs, qiov, pos); |
| } else if (bs->file) { |
| return bdrv_writev_vmstate(bs->file, qiov, pos); |
| } |
| |
| return -ENOTSUP; |
| } |
| |
| int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf, |
| int64_t pos, int size) |
| { |
| BlockDriver *drv = bs->drv; |
| if (!drv) |
| return -ENOMEDIUM; |
| if (drv->bdrv_load_vmstate) |
| return drv->bdrv_load_vmstate(bs, buf, pos, size); |
| if (bs->file) |
| return bdrv_load_vmstate(bs->file, buf, pos, size); |
| return -ENOTSUP; |
| } |
| |
| /**************************************************************/ |
| /* async I/Os */ |
| |
| BlockAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num, |
| QEMUIOVector *qiov, int nb_sectors, |
| BlockCompletionFunc *cb, void *opaque) |
| { |
| trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque); |
| |
| return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0, |
| cb, opaque, false); |
| } |
| |
| BlockAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num, |
| QEMUIOVector *qiov, int nb_sectors, |
| BlockCompletionFunc *cb, void *opaque) |
| { |
| trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque); |
| |
| return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0, |
| cb, opaque, true); |
| } |
| |
| BlockAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, BdrvRequestFlags flags, |
| BlockCompletionFunc *cb, void *opaque) |
| { |
| trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque); |
| |
| return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors, |
| BDRV_REQ_ZERO_WRITE | flags, |
| cb, opaque, true); |
| } |
| |
| |
| typedef struct MultiwriteCB { |
| int error; |
| int num_requests; |
| int num_callbacks; |
| struct { |
| BlockCompletionFunc *cb; |
| void *opaque; |
| QEMUIOVector *free_qiov; |
| } callbacks[]; |
| } MultiwriteCB; |
| |
| static void multiwrite_user_cb(MultiwriteCB *mcb) |
| { |
| int i; |
| |
| for (i = 0; i < mcb->num_callbacks; i++) { |
| mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error); |
| if (mcb->callbacks[i].free_qiov) { |
| qemu_iovec_destroy(mcb->callbacks[i].free_qiov); |
| } |
| g_free(mcb->callbacks[i].free_qiov); |
| } |
| } |
| |
| static void multiwrite_cb(void *opaque, int ret) |
| { |
| MultiwriteCB *mcb = opaque; |
| |
| trace_multiwrite_cb(mcb, ret); |
| |
| if (ret < 0 && !mcb->error) { |
| mcb->error = ret; |
| } |
| |
| mcb->num_requests--; |
| if (mcb->num_requests == 0) { |
| multiwrite_user_cb(mcb); |
| g_free(mcb); |
| } |
| } |
| |
| static int multiwrite_req_compare(const void *a, const void *b) |
| { |
| const BlockRequest *req1 = a, *req2 = b; |
| |
| /* |
| * Note that we can't simply subtract req2->sector from req1->sector |
| * here as that could overflow the return value. |
| */ |
| if (req1->sector > req2->sector) { |
| return 1; |
| } else if (req1->sector < req2->sector) { |
| return -1; |
| } else { |
| return 0; |
| } |
| } |
| |
| /* |
| * Takes a bunch of requests and tries to merge them. Returns the number of |
| * requests that remain after merging. |
| */ |
| static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs, |
| int num_reqs, MultiwriteCB *mcb) |
| { |
| int i, outidx; |
| |
| // Sort requests by start sector |
| qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare); |
| |
| // Check if adjacent requests touch the same clusters. If so, combine them, |
| // filling up gaps with zero sectors. |
| outidx = 0; |
| for (i = 1; i < num_reqs; i++) { |
| int merge = 0; |
| int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors; |
| |
| // Handle exactly sequential writes and overlapping writes. |
| if (reqs[i].sector <= oldreq_last) { |
| merge = 1; |
| } |
| |
| if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) { |
| merge = 0; |
| } |
| |
| if (bs->bl.max_transfer_length && reqs[outidx].nb_sectors + |
| reqs[i].nb_sectors > bs->bl.max_transfer_length) { |
| merge = 0; |
| } |
| |
| if (merge) { |
| size_t size; |
| QEMUIOVector *qiov = g_malloc0(sizeof(*qiov)); |
| qemu_iovec_init(qiov, |
| reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1); |
| |
| // Add the first request to the merged one. If the requests are |
| // overlapping, drop the last sectors of the first request. |
| size = (reqs[i].sector - reqs[outidx].sector) << 9; |
| qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size); |
| |
| // We should need to add any zeros between the two requests |
| assert (reqs[i].sector <= oldreq_last); |
| |
| // Add the second request |
| qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size); |
| |
| // Add tail of first request, if necessary |
| if (qiov->size < reqs[outidx].qiov->size) { |
| qemu_iovec_concat(qiov, reqs[outidx].qiov, qiov->size, |
| reqs[outidx].qiov->size - qiov->size); |
| } |
| |
| reqs[outidx].nb_sectors = qiov->size >> 9; |
| reqs[outidx].qiov = qiov; |
| |
| mcb->callbacks[i].free_qiov = reqs[outidx].qiov; |
| } else { |
| outidx++; |
| reqs[outidx].sector = reqs[i].sector; |
| reqs[outidx].nb_sectors = reqs[i].nb_sectors; |
| reqs[outidx].qiov = reqs[i].qiov; |
| } |
| } |
| |
| block_acct_merge_done(&bs->stats, BLOCK_ACCT_WRITE, num_reqs - outidx - 1); |
| |
| return outidx + 1; |
| } |
| |
| /* |
| * Submit multiple AIO write requests at once. |
| * |
| * On success, the function returns 0 and all requests in the reqs array have |
| * been submitted. In error case this function returns -1, and any of the |
| * requests may or may not be submitted yet. In particular, this means that the |
| * callback will be called for some of the requests, for others it won't. The |
| * caller must check the error field of the BlockRequest to wait for the right |
| * callbacks (if error != 0, no callback will be called). |
| * |
| * The implementation may modify the contents of the reqs array, e.g. to merge |
| * requests. However, the fields opaque and error are left unmodified as they |
| * are used to signal failure for a single request to the caller. |
| */ |
| int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs) |
| { |
| MultiwriteCB *mcb; |
| int i; |
| |
| /* don't submit writes if we don't have a medium */ |
| if (bs->drv == NULL) { |
| for (i = 0; i < num_reqs; i++) { |
| reqs[i].error = -ENOMEDIUM; |
| } |
| return -1; |
| } |
| |
| if (num_reqs == 0) { |
| return 0; |
| } |
| |
| // Create MultiwriteCB structure |
| mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks)); |
| mcb->num_requests = 0; |
| mcb->num_callbacks = num_reqs; |
| |
| for (i = 0; i < num_reqs; i++) { |
| mcb->callbacks[i].cb = reqs[i].cb; |
| mcb->callbacks[i].opaque = reqs[i].opaque; |
| } |
| |
| // Check for mergable requests |
| num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb); |
| |
| trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs); |
| |
| /* Run the aio requests. */ |
| mcb->num_requests = num_reqs; |
| for (i = 0; i < num_reqs; i++) { |
| bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov, |
| reqs[i].nb_sectors, reqs[i].flags, |
| multiwrite_cb, mcb, |
| true); |
| } |
| |
| return 0; |
| } |
| |
| void bdrv_aio_cancel(BlockAIOCB *acb) |
| { |
| qemu_aio_ref(acb); |
| bdrv_aio_cancel_async(acb); |
| while (acb->refcnt > 1) { |
| if (acb->aiocb_info->get_aio_context) { |
| aio_poll(acb->aiocb_info->get_aio_context(acb), true); |
| } else if (acb->bs) { |
| aio_poll(bdrv_get_aio_context(acb->bs), true); |
| } else { |
| abort(); |
| } |
| } |
| qemu_aio_unref(acb); |
| } |
| |
| /* Async version of aio cancel. The caller is not blocked if the acb implements |
| * cancel_async, otherwise we do nothing and let the request normally complete. |
| * In either case the completion callback must be called. */ |
| void bdrv_aio_cancel_async(BlockAIOCB *acb) |
| { |
| if (acb->aiocb_info->cancel_async) { |
| acb->aiocb_info->cancel_async(acb); |
| } |
| } |
| |
| /**************************************************************/ |
| /* async block device emulation */ |
| |
| typedef struct BlockAIOCBSync { |
| BlockAIOCB common; |
| QEMUBH *bh; |
| int ret; |
| /* vector translation state */ |
| QEMUIOVector *qiov; |
| uint8_t *bounce; |
| int is_write; |
| } BlockAIOCBSync; |
| |
| static const AIOCBInfo bdrv_em_aiocb_info = { |
| .aiocb_size = sizeof(BlockAIOCBSync), |
| }; |
| |
| static void bdrv_aio_bh_cb(void *opaque) |
| { |
| BlockAIOCBSync *acb = opaque; |
| |
| if (!acb->is_write && acb->ret >= 0) { |
| qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size); |
| } |
| qemu_vfree(acb->bounce); |
| acb->common.cb(acb->common.opaque, acb->ret); |
| qemu_bh_delete(acb->bh); |
| acb->bh = NULL; |
| qemu_aio_unref(acb); |
| } |
| |
| static BlockAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs, |
| int64_t sector_num, |
| QEMUIOVector *qiov, |
| int nb_sectors, |
| BlockCompletionFunc *cb, |
| void *opaque, |
| int is_write) |
| |
| { |
| BlockAIOCBSync *acb; |
| |
| acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque); |
| acb->is_write = is_write; |
| acb->qiov = qiov; |
| acb->bounce = qemu_try_blockalign(bs, qiov->size); |
| acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_aio_bh_cb, acb); |
| |
| if (acb->bounce == NULL) { |
| acb->ret = -ENOMEM; |
| } else if (is_write) { |
| qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size); |
| acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors); |
| } else { |
| acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors); |
| } |
| |
| qemu_bh_schedule(acb->bh); |
| |
| return &acb->common; |
| } |
| |
| static BlockAIOCB *bdrv_aio_readv_em(BlockDriverState *bs, |
| int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, |
| BlockCompletionFunc *cb, void *opaque) |
| { |
| return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0); |
| } |
| |
| static BlockAIOCB *bdrv_aio_writev_em(BlockDriverState *bs, |
| int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, |
| BlockCompletionFunc *cb, void *opaque) |
| { |
| return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1); |
| } |
| |
| |
| typedef struct BlockAIOCBCoroutine { |
| BlockAIOCB common; |
| BlockRequest req; |
| bool is_write; |
| bool need_bh; |
| bool *done; |
| QEMUBH* bh; |
| } BlockAIOCBCoroutine; |
| |
| static const AIOCBInfo bdrv_em_co_aiocb_info = { |
| .aiocb_size = sizeof(BlockAIOCBCoroutine), |
| }; |
| |
| static void bdrv_co_complete(BlockAIOCBCoroutine *acb) |
| { |
| if (!acb->need_bh) { |
| acb->common.cb(acb->common.opaque, acb->req.error); |
| qemu_aio_unref(acb); |
| } |
| } |
| |
| static void bdrv_co_em_bh(void *opaque) |
| { |
| BlockAIOCBCoroutine *acb = opaque; |
| |
| assert(!acb->need_bh); |
| qemu_bh_delete(acb->bh); |
| bdrv_co_complete(acb); |
| } |
| |
| static void bdrv_co_maybe_schedule_bh(BlockAIOCBCoroutine *acb) |
| { |
| acb->need_bh = false; |
| if (acb->req.error != -EINPROGRESS) { |
| BlockDriverState *bs = acb->common.bs; |
| |
| acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb); |
| qemu_bh_schedule(acb->bh); |
| } |
| } |
| |
| /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */ |
| static void coroutine_fn bdrv_co_do_rw(void *opaque) |
| { |
| BlockAIOCBCoroutine *acb = opaque; |
| BlockDriverState *bs = acb->common.bs; |
| |
| if (!acb->is_write) { |
| acb->req.error = bdrv_co_do_readv(bs, acb->req.sector, |
| acb->req.nb_sectors, acb->req.qiov, acb->req.flags); |
| } else { |
| acb->req.error = bdrv_co_do_writev(bs, acb->req.sector, |
| acb->req.nb_sectors, acb->req.qiov, acb->req.flags); |
| } |
| |
| bdrv_co_complete(acb); |
| } |
| |
| static BlockAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs, |
| int64_t sector_num, |
| QEMUIOVector *qiov, |
| int nb_sectors, |
| BdrvRequestFlags flags, |
| BlockCompletionFunc *cb, |
| void *opaque, |
| bool is_write) |
| { |
| Coroutine *co; |
| BlockAIOCBCoroutine *acb; |
| |
| acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque); |
| acb->need_bh = true; |
| acb->req.error = -EINPROGRESS; |
| acb->req.sector = sector_num; |
| acb->req.nb_sectors = nb_sectors; |
| acb->req.qiov = qiov; |
| acb->req.flags = flags; |
| acb->is_write = is_write; |
| |
| co = qemu_coroutine_create(bdrv_co_do_rw); |
| qemu_coroutine_enter(co, acb); |
| |
| bdrv_co_maybe_schedule_bh(acb); |
| return &acb->common; |
| } |
| |
| static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque) |
| { |
| BlockAIOCBCoroutine *acb = opaque; |
| BlockDriverState *bs = acb->common.bs; |
| |
| acb->req.error = bdrv_co_flush(bs); |
| bdrv_co_complete(acb); |
| } |
| |
| BlockAIOCB *bdrv_aio_flush(BlockDriverState *bs, |
| BlockCompletionFunc *cb, void *opaque) |
| { |
| trace_bdrv_aio_flush(bs, opaque); |
| |
| Coroutine *co; |
| BlockAIOCBCoroutine *acb; |
| |
| acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque); |
| acb->need_bh = true; |
| acb->req.error = -EINPROGRESS; |
| |
| co = qemu_coroutine_create(bdrv_aio_flush_co_entry); |
| qemu_coroutine_enter(co, acb); |
| |
| bdrv_co_maybe_schedule_bh(acb); |
| return &acb->common; |
| } |
| |
| static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque) |
| { |
| BlockAIOCBCoroutine *acb = opaque; |
| BlockDriverState *bs = acb->common.bs; |
| |
| acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors); |
| bdrv_co_complete(acb); |
| } |
| |
| BlockAIOCB *bdrv_aio_discard(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, |
| BlockCompletionFunc *cb, void *opaque) |
| { |
| Coroutine *co; |
| BlockAIOCBCoroutine *acb; |
| |
| trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque); |
| |
| acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque); |
| acb->need_bh = true; |
| acb->req.error = -EINPROGRESS; |
| acb->req.sector = sector_num; |
| acb->req.nb_sectors = nb_sectors; |
| co = qemu_coroutine_create(bdrv_aio_discard_co_entry); |
| qemu_coroutine_enter(co, acb); |
| |
| bdrv_co_maybe_schedule_bh(acb); |
| return &acb->common; |
| } |
| |
| void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs, |
| BlockCompletionFunc *cb, void *opaque) |
| { |
| BlockAIOCB *acb; |
| |
| acb = g_slice_alloc(aiocb_info->aiocb_size); |
| acb->aiocb_info = aiocb_info; |
| acb->bs = bs; |
| acb->cb = cb; |
| acb->opaque = opaque; |
| acb->refcnt = 1; |
| return acb; |
| } |
| |
| void qemu_aio_ref(void *p) |
| { |
| BlockAIOCB *acb = p; |
| acb->refcnt++; |
| } |
| |
| void qemu_aio_unref(void *p) |
| { |
| BlockAIOCB *acb = p; |
| assert(acb->refcnt > 0); |
| if (--acb->refcnt == 0) { |
| g_slice_free1(acb->aiocb_info->aiocb_size, acb); |
| } |
| } |
| |
| /**************************************************************/ |
| /* Coroutine block device emulation */ |
| |
| typedef struct CoroutineIOCompletion { |
| Coroutine *coroutine; |
| int ret; |
| } CoroutineIOCompletion; |
| |
| static void bdrv_co_io_em_complete(void *opaque, int ret) |
| { |
| CoroutineIOCompletion *co = opaque; |
| |
| co->ret = ret; |
| qemu_coroutine_enter(co->coroutine, NULL); |
| } |
| |
| static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num, |
| int nb_sectors, QEMUIOVector *iov, |
| bool is_write) |
| { |
| CoroutineIOCompletion co = { |
| .coroutine = qemu_coroutine_self(), |
| }; |
| BlockAIOCB *acb; |
| |
| if (is_write) { |
| acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors, |
| bdrv_co_io_em_complete, &co); |
| } else { |
| acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors, |
| bdrv_co_io_em_complete, &co); |
| } |
| |
| trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb); |
| if (!acb) { |
| return -EIO; |
| } |
| qemu_coroutine_yield(); |
| |
| return co.ret; |
| } |
| |
| static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, |
| QEMUIOVector *iov) |
| { |
| return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false); |
| } |
| |
| static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs, |
| int64_t sector_num, int nb_sectors, |
| QEMUIOVector *iov) |
| { |
| return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true); |
| } |
| |
| static void coroutine_fn bdrv_flush_co_entry(void *opaque) |
| { |
| RwCo *rwco = opaque; |
| |
| rwco->ret = bdrv_co_flush(rwco->bs); |
| } |
| |
| int coroutine_fn bdrv_co_flush(BlockDriverState *bs) |
| { |
| int ret; |
| |
| if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs) || |
| bdrv_is_sg(bs)) { |
| return 0; |
| } |
| |
| /* Write back cached data to the OS even with cache=unsafe */ |
| BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS); |
| if (bs->drv->bdrv_co_flush_to_os) { |
| ret = bs->drv->bdrv_co_flush_to_os(bs); |
| if (ret < 0) { |
| return ret; |
| } |
| } |
| |
| /* But don't actually force it to the disk with cache=unsafe */ |
| if (bs->open_flags & BDRV_O_NO_FLUSH) { |
| goto flush_parent; |
| } |
| |
| BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK); |
| if (bs->drv->bdrv_co_flush_to_disk) { |
| ret = bs->drv->bdrv_co_flush_to_disk(bs); |
| } else if (bs->drv->bdrv_aio_flush) { |
| BlockAIOCB *acb; |
| CoroutineIOCompletion co = { |
| .coroutine = qemu_coroutine_self(), |
| }; |
| |
| acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co); |
| if (acb == NULL) { |
| ret = -EIO; |
| } else { |
| qemu_coroutine_yield(); |
| ret = co.ret; |
| } |
| } else { |
| /* |
| * Some block drivers always operate in either writethrough or unsafe |
| * mode and don't support bdrv_flush therefore. Usually qemu doesn't |
| * know how the server works (because the behaviour is hardcoded or |
| * depends on server-side configuration), so we can't ensure that |
| * everything is safe on disk. Returning an error doesn't work because |
| * that would break guests even if the server operates in writethrough |
| * mode. |
| * |
| * Let's hope the user knows what he's doing. |
| */ |
| ret = 0; |
| } |
| if (ret < 0) { |
| return ret; |
| } |
| |
| /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH |
| * in the case of cache=unsafe, so there are no useless flushes. |
| */ |
| flush_parent: |
| return bdrv_co_flush(bs->file); |
| } |
| |
| int bdrv_flush(BlockDriverState *bs) |
| { |
| Coroutine *co; |
| RwCo rwco = { |
| .bs = bs, |
| .ret = NOT_DONE, |
| }; |
| |
| if (qemu_in_coroutine()) { |
| /* Fast-path if already in coroutine context */ |
| bdrv_flush_co_entry(&rwco); |
| } else { |
| AioContext *aio_context = bdrv_get_aio_context(bs); |
| |
| co = qemu_coroutine_create(bdrv_flush_co_entry); |
| qemu_coroutine_enter(co, &rwco); |
| while (rwco.ret == NOT_DONE) { |
| aio_poll(aio_context, true); |
| } |
| } |
| |
| return rwco.ret; |
| } |
| |
| typedef struct DiscardCo { |
| BlockDriverState *bs; |
| int64_t sector_num; |
| int nb_sectors; |
| int ret; |
| } DiscardCo; |
| static void coroutine_fn bdrv_discard_co_entry(void *opaque) |
| { |
| DiscardCo *rwco = opaque; |
| |
| rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors); |
| } |
| |
| int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num, |
| int nb_sectors) |
| { |
| int max_discard, ret; |
| |
| if (!bs->drv) { |
| return -ENOMEDIUM; |
| } |
| |
| ret = bdrv_check_request(bs, sector_num, nb_sectors); |
| if (ret < 0) { |
| return ret; |
| } else if (bs->read_only) { |
| return -EPERM; |
| } |
| |
| /* Do nothing if disabled. */ |
| if (!(bs->open_flags & BDRV_O_UNMAP)) { |
| return 0; |
| } |
| |
| if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) { |
| return 0; |
| } |
| |
| bdrv_set_dirty(bs, sector_num, nb_sectors); |
| |
| max_discard = MIN_NON_ZERO(bs->bl.max_discard, BDRV_REQUEST_MAX_SECTORS); |
| while (nb_sectors > 0) { |
| int ret; |
| int num = nb_sectors; |
| |
| /* align request */ |
| if (bs->bl.discard_alignment && |
| num >= bs->bl.discard_alignment && |
| sector_num % bs->bl.discard_alignment) { |
| if (num > bs->bl.discard_alignment) { |
| num = bs->bl.discard_alignment; |
| } |
| num -= sector_num % bs->bl.discard_alignment; |
| } |
| |
| /* limit request size */ |
| if (num > max_discard) { |
| num = max_discard; |
| } |
| |
| if (bs->drv->bdrv_co_discard) { |
| ret = bs->drv->bdrv_co_discard(bs, sector_num, num); |
| } else { |
| BlockAIOCB *acb; |
| CoroutineIOCompletion co = { |
| .coroutine = qemu_coroutine_self(), |
| }; |
| |
| acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors, |
| bdrv_co_io_em_complete, &co); |
| if (acb == NULL) { |
| return -EIO; |
| } else { |
| qemu_coroutine_yield(); |
| ret = co.ret; |
| } |
| } |
| if (ret && ret != -ENOTSUP) { |
| return ret; |
| } |
| |
| sector_num += num; |
| nb_sectors -= num; |
| } |
| return 0; |
| } |
| |
| int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors) |
| { |
| Coroutine *co; |
| DiscardCo rwco = { |
| .bs = bs, |
| .sector_num = sector_num, |
| .nb_sectors = nb_sectors, |
| .ret = NOT_DONE, |
| }; |
| |
| if (qemu_in_coroutine()) { |
| /* Fast-path if already in coroutine context */ |
| bdrv_discard_co_entry(&rwco); |
| } else { |
| AioContext *aio_context = bdrv_get_aio_context(bs); |
| |
| co = qemu_coroutine_create(bdrv_discard_co_entry); |
| qemu_coroutine_enter(co, &rwco); |
| while (rwco.ret == NOT_DONE) { |
| aio_poll(aio_context, true); |
| } |
| } |
| |
| return rwco.ret; |
| } |
| |
| /* needed for generic scsi interface */ |
| |
| int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf) |
| { |
| BlockDriver *drv = bs->drv; |
| |
| if (drv && drv->bdrv_ioctl) |
| return drv->bdrv_ioctl(bs, req, buf); |
| return -ENOTSUP; |
| } |
| |
| BlockAIOCB *bdrv_aio_ioctl(BlockDriverState *bs, |
| unsigned long int req, void *buf, |
| BlockCompletionFunc *cb, void *opaque) |
| { |
| BlockDriver *drv = bs->drv; |
| |
| if (drv && drv->bdrv_aio_ioctl) |
| return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque); |
| return NULL; |
| } |
| |
| void *qemu_blockalign(BlockDriverState *bs, size_t size) |
| { |
| return qemu_memalign(bdrv_opt_mem_align(bs), size); |
| } |
| |
| void *qemu_blockalign0(BlockDriverState *bs, size_t size) |
| { |
| return memset(qemu_blockalign(bs, size), 0, size); |
| } |
| |
| void *qemu_try_blockalign(BlockDriverState *bs, size_t size) |
| { |
| size_t align = bdrv_opt_mem_align(bs); |
| |
| /* Ensure that NULL is never returned on success */ |
| assert(align > 0); |
| if (size == 0) { |
| size = align; |
| } |
| |
| return qemu_try_memalign(align, size); |
| } |
| |
| void *qemu_try_blockalign0(BlockDriverState *bs, size_t size) |
| { |
| void *mem = qemu_try_blockalign(bs, size); |
| |
| if (mem) { |
| memset(mem, 0, size); |
| } |
| |
| return mem; |
| } |
| |
| /* |
| * Check if all memory in this vector is sector aligned. |
| */ |
| bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov) |
| { |
| int i; |
| size_t alignment = bdrv_min_mem_align(bs); |
| |
| for (i = 0; i < qiov->niov; i++) { |
| if ((uintptr_t) qiov->iov[i].iov_base % alignment) { |
| return false; |
| } |
| if (qiov->iov[i].iov_len % alignment) { |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| void bdrv_add_before_write_notifier(BlockDriverState *bs, |
| NotifierWithReturn *notifier) |
| { |
| notifier_with_return_list_add(&bs->before_write_notifiers, notifier); |
| } |
| |
| void bdrv_io_plug(BlockDriverState *bs) |
| { |
| BlockDriver *drv = bs->drv; |
| if (drv && drv->bdrv_io_plug) { |
| drv->bdrv_io_plug(bs); |
| } else if (bs->file) { |
| bdrv_io_plug(bs->file); |
| } |
| } |
| |
| void bdrv_io_unplug(BlockDriverState *bs) |
| { |
| BlockDriver *drv = bs->drv; |
| if (drv && drv->bdrv_io_unplug) { |
| drv->bdrv_io_unplug(bs); |
| } else if (bs->file) { |
| bdrv_io_unplug(bs->file); |
| } |
| } |
| |
| void bdrv_flush_io_queue(BlockDriverState *bs) |
| { |
| BlockDriver *drv = bs->drv; |
| if (drv && drv->bdrv_flush_io_queue) { |
| drv->bdrv_flush_io_queue(bs); |
| } else if (bs->file) { |
| bdrv_flush_io_queue(bs->file); |
| } |
| bdrv_start_throttled_reqs(bs); |
| } |