| /* |
| * Aspeed SD Host Controller |
| * Eddie James <eajames@linux.ibm.com> |
| * |
| * Copyright (C) 2019 IBM Corp |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/log.h" |
| #include "qemu/error-report.h" |
| #include "hw/sd/aspeed_sdhci.h" |
| #include "qapi/error.h" |
| #include "hw/irq.h" |
| #include "migration/vmstate.h" |
| #include "hw/qdev-properties.h" |
| #include "trace.h" |
| |
| #define ASPEED_SDHCI_INFO 0x00 |
| #define ASPEED_SDHCI_INFO_SLOT1 (1 << 17) |
| #define ASPEED_SDHCI_INFO_SLOT0 (1 << 16) |
| #define ASPEED_SDHCI_INFO_RESET (1 << 0) |
| #define ASPEED_SDHCI_DEBOUNCE 0x04 |
| #define ASPEED_SDHCI_DEBOUNCE_RESET 0x00000005 |
| #define ASPEED_SDHCI_BUS 0x08 |
| #define ASPEED_SDHCI_SDIO_140 0x10 |
| #define ASPEED_SDHCI_SDIO_148 0x18 |
| #define ASPEED_SDHCI_SDIO_240 0x20 |
| #define ASPEED_SDHCI_SDIO_248 0x28 |
| #define ASPEED_SDHCI_WP_POL 0xec |
| #define ASPEED_SDHCI_CARD_DET 0xf0 |
| #define ASPEED_SDHCI_IRQ_STAT 0xfc |
| |
| #define TO_REG(addr) ((addr) / sizeof(uint32_t)) |
| |
| static uint64_t aspeed_sdhci_read(void *opaque, hwaddr addr, unsigned int size) |
| { |
| uint32_t val = 0; |
| AspeedSDHCIState *sdhci = opaque; |
| |
| switch (addr) { |
| case ASPEED_SDHCI_SDIO_140: |
| val = (uint32_t)sdhci->slots[0].capareg; |
| break; |
| case ASPEED_SDHCI_SDIO_148: |
| val = (uint32_t)sdhci->slots[0].maxcurr; |
| break; |
| case ASPEED_SDHCI_SDIO_240: |
| val = (uint32_t)sdhci->slots[1].capareg; |
| break; |
| case ASPEED_SDHCI_SDIO_248: |
| val = (uint32_t)sdhci->slots[1].maxcurr; |
| break; |
| default: |
| if (addr < ASPEED_SDHCI_REG_SIZE) { |
| val = sdhci->regs[TO_REG(addr)]; |
| } else { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: Out-of-bounds read at 0x%" HWADDR_PRIx "\n", |
| __func__, addr); |
| } |
| } |
| |
| trace_aspeed_sdhci_read(addr, size, (uint64_t) val); |
| |
| return (uint64_t)val; |
| } |
| |
| static void aspeed_sdhci_write(void *opaque, hwaddr addr, uint64_t val, |
| unsigned int size) |
| { |
| AspeedSDHCIState *sdhci = opaque; |
| |
| trace_aspeed_sdhci_write(addr, size, val); |
| |
| switch (addr) { |
| case ASPEED_SDHCI_INFO: |
| /* The RESET bit automatically clears. */ |
| sdhci->regs[TO_REG(addr)] = (uint32_t)val & ~ASPEED_SDHCI_INFO_RESET; |
| break; |
| case ASPEED_SDHCI_SDIO_140: |
| sdhci->slots[0].capareg = (uint64_t)(uint32_t)val; |
| break; |
| case ASPEED_SDHCI_SDIO_148: |
| sdhci->slots[0].maxcurr = (uint64_t)(uint32_t)val; |
| break; |
| case ASPEED_SDHCI_SDIO_240: |
| sdhci->slots[1].capareg = (uint64_t)(uint32_t)val; |
| break; |
| case ASPEED_SDHCI_SDIO_248: |
| sdhci->slots[1].maxcurr = (uint64_t)(uint32_t)val; |
| break; |
| default: |
| if (addr < ASPEED_SDHCI_REG_SIZE) { |
| sdhci->regs[TO_REG(addr)] = (uint32_t)val; |
| } else { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: Out-of-bounds write at 0x%" HWADDR_PRIx "\n", |
| __func__, addr); |
| } |
| } |
| } |
| |
| static const MemoryRegionOps aspeed_sdhci_ops = { |
| .read = aspeed_sdhci_read, |
| .write = aspeed_sdhci_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .valid.min_access_size = 4, |
| .valid.max_access_size = 4, |
| }; |
| |
| static void aspeed_sdhci_set_irq(void *opaque, int n, int level) |
| { |
| AspeedSDHCIState *sdhci = opaque; |
| |
| if (level) { |
| sdhci->regs[TO_REG(ASPEED_SDHCI_IRQ_STAT)] |= BIT(n); |
| |
| qemu_irq_raise(sdhci->irq); |
| } else { |
| sdhci->regs[TO_REG(ASPEED_SDHCI_IRQ_STAT)] &= ~BIT(n); |
| |
| qemu_irq_lower(sdhci->irq); |
| } |
| } |
| |
| static void aspeed_sdhci_realize(DeviceState *dev, Error **errp) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| AspeedSDHCIState *sdhci = ASPEED_SDHCI(dev); |
| |
| /* Create input irqs for the slots */ |
| qdev_init_gpio_in_named_with_opaque(DEVICE(sbd), aspeed_sdhci_set_irq, |
| sdhci, NULL, sdhci->num_slots); |
| |
| sysbus_init_irq(sbd, &sdhci->irq); |
| memory_region_init_io(&sdhci->iomem, OBJECT(sdhci), &aspeed_sdhci_ops, |
| sdhci, TYPE_ASPEED_SDHCI, 0x1000); |
| sysbus_init_mmio(sbd, &sdhci->iomem); |
| |
| for (int i = 0; i < sdhci->num_slots; ++i) { |
| Object *sdhci_slot = OBJECT(&sdhci->slots[i]); |
| SysBusDevice *sbd_slot = SYS_BUS_DEVICE(&sdhci->slots[i]); |
| |
| if (!object_property_set_int(sdhci_slot, "sd-spec-version", 2, errp)) { |
| return; |
| } |
| |
| if (!object_property_set_uint(sdhci_slot, "capareg", |
| ASPEED_SDHCI_CAPABILITIES, errp)) { |
| return; |
| } |
| |
| if (!sysbus_realize(sbd_slot, errp)) { |
| return; |
| } |
| |
| sysbus_connect_irq(sbd_slot, 0, qdev_get_gpio_in(DEVICE(sbd), i)); |
| memory_region_add_subregion(&sdhci->iomem, (i + 1) * 0x100, |
| &sdhci->slots[i].iomem); |
| } |
| } |
| |
| static void aspeed_sdhci_reset(DeviceState *dev) |
| { |
| AspeedSDHCIState *sdhci = ASPEED_SDHCI(dev); |
| |
| memset(sdhci->regs, 0, ASPEED_SDHCI_REG_SIZE); |
| |
| sdhci->regs[TO_REG(ASPEED_SDHCI_INFO)] = ASPEED_SDHCI_INFO_SLOT0; |
| if (sdhci->num_slots == 2) { |
| sdhci->regs[TO_REG(ASPEED_SDHCI_INFO)] |= ASPEED_SDHCI_INFO_SLOT1; |
| } |
| sdhci->regs[TO_REG(ASPEED_SDHCI_DEBOUNCE)] = ASPEED_SDHCI_DEBOUNCE_RESET; |
| } |
| |
| static const VMStateDescription vmstate_aspeed_sdhci = { |
| .name = TYPE_ASPEED_SDHCI, |
| .version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_UINT32_ARRAY(regs, AspeedSDHCIState, ASPEED_SDHCI_NUM_REGS), |
| VMSTATE_END_OF_LIST(), |
| }, |
| }; |
| |
| static Property aspeed_sdhci_properties[] = { |
| DEFINE_PROP_UINT8("num-slots", AspeedSDHCIState, num_slots, 0), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void aspeed_sdhci_class_init(ObjectClass *classp, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(classp); |
| |
| dc->realize = aspeed_sdhci_realize; |
| dc->reset = aspeed_sdhci_reset; |
| dc->vmsd = &vmstate_aspeed_sdhci; |
| device_class_set_props(dc, aspeed_sdhci_properties); |
| } |
| |
| static const TypeInfo aspeed_sdhci_types[] = { |
| { |
| .name = TYPE_ASPEED_SDHCI, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(AspeedSDHCIState), |
| .class_init = aspeed_sdhci_class_init, |
| }, |
| }; |
| |
| DEFINE_TYPES(aspeed_sdhci_types) |