| /****************************************************************************/ |
| /* |
| * QEMU bFLT binary loader. Based on linux/fs/binfmt_flat.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * Copyright (C) 2006 CodeSourcery. |
| * Copyright (C) 2000-2003 David McCullough <davidm@snapgear.com> |
| * Copyright (C) 2002 Greg Ungerer <gerg@snapgear.com> |
| * Copyright (C) 2002 SnapGear, by Paul Dale <pauli@snapgear.com> |
| * Copyright (C) 2000, 2001 Lineo, by David McCullough <davidm@lineo.com> |
| * based heavily on: |
| * |
| * linux/fs/binfmt_aout.c: |
| * Copyright (C) 1991, 1992, 1996 Linus Torvalds |
| * linux/fs/binfmt_flat.c for 2.0 kernel |
| * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> |
| * JAN/99 -- coded full program relocation (gerg@snapgear.com) |
| */ |
| |
| /* ??? ZFLAT and shared library support is currently disabled. */ |
| |
| /****************************************************************************/ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <errno.h> |
| #include <sys/mman.h> |
| #include <unistd.h> |
| |
| #include "qemu.h" |
| #include "flat.h" |
| |
| //#define DEBUG |
| |
| #ifdef DEBUG |
| #define DBG_FLT(...) printf(__VA_ARGS__) |
| #else |
| #define DBG_FLT(...) |
| #endif |
| |
| #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) |
| #define flat_old_ram_flag(flag) (flag) |
| #ifdef TARGET_WORDS_BIGENDIAN |
| #define flat_get_relocate_addr(relval) (relval) |
| #else |
| #define flat_get_relocate_addr(relval) bswap32(relval) |
| #endif |
| |
| #define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */ |
| #define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */ |
| |
| struct lib_info { |
| abi_ulong start_code; /* Start of text segment */ |
| abi_ulong start_data; /* Start of data segment */ |
| abi_ulong end_data; /* Start of bss section */ |
| abi_ulong start_brk; /* End of data segment */ |
| abi_ulong text_len; /* Length of text segment */ |
| abi_ulong entry; /* Start address for this module */ |
| abi_ulong build_date; /* When this one was compiled */ |
| short loaded; /* Has this library been loaded? */ |
| }; |
| |
| #ifdef CONFIG_BINFMT_SHARED_FLAT |
| static int load_flat_shared_library(int id, struct lib_info *p); |
| #endif |
| |
| struct linux_binprm; |
| |
| #define ntohl(x) be32_to_cpu(x) |
| |
| /****************************************************************************/ |
| /* |
| * create_flat_tables() parses the env- and arg-strings in new user |
| * memory and creates the pointer tables from them, and puts their |
| * addresses on the "stack", returning the new stack pointer value. |
| */ |
| |
| /* Push a block of strings onto the guest stack. */ |
| static abi_ulong copy_strings(abi_ulong p, int n, char **s) |
| { |
| int len; |
| |
| while (n-- > 0) { |
| len = strlen(s[n]) + 1; |
| p -= len; |
| memcpy_to_target(p, s[n], len); |
| } |
| |
| return p; |
| } |
| |
| static int target_pread(int fd, abi_ulong ptr, abi_ulong len, |
| abi_ulong offset) |
| { |
| void *buf; |
| int ret; |
| |
| buf = lock_user(VERIFY_WRITE, ptr, len, 0); |
| ret = pread(fd, buf, len, offset); |
| unlock_user(buf, ptr, len); |
| return ret; |
| } |
| /****************************************************************************/ |
| |
| #ifdef CONFIG_BINFMT_ZFLAT |
| |
| #include <linux/zlib.h> |
| |
| #define LBUFSIZE 4000 |
| |
| /* gzip flag byte */ |
| #define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ |
| #define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ |
| #define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ |
| #define ORIG_NAME 0x08 /* bit 3 set: original file name present */ |
| #define COMMENT 0x10 /* bit 4 set: file comment present */ |
| #define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ |
| #define RESERVED 0xC0 /* bit 6,7: reserved */ |
| |
| static int decompress_exec( |
| struct linux_binprm *bprm, |
| unsigned long offset, |
| char *dst, |
| long len, |
| int fd) |
| { |
| unsigned char *buf; |
| z_stream strm; |
| loff_t fpos; |
| int ret, retval; |
| |
| DBG_FLT("decompress_exec(offset=%x,buf=%x,len=%x)\n",(int)offset, (int)dst, (int)len); |
| |
| memset(&strm, 0, sizeof(strm)); |
| strm.workspace = kmalloc(zlib_inflate_workspacesize(), GFP_KERNEL); |
| if (strm.workspace == NULL) { |
| DBG_FLT("binfmt_flat: no memory for decompress workspace\n"); |
| return -ENOMEM; |
| } |
| buf = kmalloc(LBUFSIZE, GFP_KERNEL); |
| if (buf == NULL) { |
| DBG_FLT("binfmt_flat: no memory for read buffer\n"); |
| retval = -ENOMEM; |
| goto out_free; |
| } |
| |
| /* Read in first chunk of data and parse gzip header. */ |
| fpos = offset; |
| ret = bprm->file->f_op->read(bprm->file, buf, LBUFSIZE, &fpos); |
| |
| strm.next_in = buf; |
| strm.avail_in = ret; |
| strm.total_in = 0; |
| |
| retval = -ENOEXEC; |
| |
| /* Check minimum size -- gzip header */ |
| if (ret < 10) { |
| DBG_FLT("binfmt_flat: file too small?\n"); |
| goto out_free_buf; |
| } |
| |
| /* Check gzip magic number */ |
| if ((buf[0] != 037) || ((buf[1] != 0213) && (buf[1] != 0236))) { |
| DBG_FLT("binfmt_flat: unknown compression magic?\n"); |
| goto out_free_buf; |
| } |
| |
| /* Check gzip method */ |
| if (buf[2] != 8) { |
| DBG_FLT("binfmt_flat: unknown compression method?\n"); |
| goto out_free_buf; |
| } |
| /* Check gzip flags */ |
| if ((buf[3] & ENCRYPTED) || (buf[3] & CONTINUATION) || |
| (buf[3] & RESERVED)) { |
| DBG_FLT("binfmt_flat: unknown flags?\n"); |
| goto out_free_buf; |
| } |
| |
| ret = 10; |
| if (buf[3] & EXTRA_FIELD) { |
| ret += 2 + buf[10] + (buf[11] << 8); |
| if (unlikely(LBUFSIZE == ret)) { |
| DBG_FLT("binfmt_flat: buffer overflow (EXTRA)?\n"); |
| goto out_free_buf; |
| } |
| } |
| if (buf[3] & ORIG_NAME) { |
| for (; ret < LBUFSIZE && (buf[ret] != 0); ret++) |
| ; |
| if (unlikely(LBUFSIZE == ret)) { |
| DBG_FLT("binfmt_flat: buffer overflow (ORIG_NAME)?\n"); |
| goto out_free_buf; |
| } |
| } |
| if (buf[3] & COMMENT) { |
| for (; ret < LBUFSIZE && (buf[ret] != 0); ret++) |
| ; |
| if (unlikely(LBUFSIZE == ret)) { |
| DBG_FLT("binfmt_flat: buffer overflow (COMMENT)?\n"); |
| goto out_free_buf; |
| } |
| } |
| |
| strm.next_in += ret; |
| strm.avail_in -= ret; |
| |
| strm.next_out = dst; |
| strm.avail_out = len; |
| strm.total_out = 0; |
| |
| if (zlib_inflateInit2(&strm, -MAX_WBITS) != Z_OK) { |
| DBG_FLT("binfmt_flat: zlib init failed?\n"); |
| goto out_free_buf; |
| } |
| |
| while ((ret = zlib_inflate(&strm, Z_NO_FLUSH)) == Z_OK) { |
| ret = bprm->file->f_op->read(bprm->file, buf, LBUFSIZE, &fpos); |
| if (ret <= 0) |
| break; |
| if (ret >= (unsigned long) -4096) |
| break; |
| len -= ret; |
| |
| strm.next_in = buf; |
| strm.avail_in = ret; |
| strm.total_in = 0; |
| } |
| |
| if (ret < 0) { |
| DBG_FLT("binfmt_flat: decompression failed (%d), %s\n", |
| ret, strm.msg); |
| goto out_zlib; |
| } |
| |
| retval = 0; |
| out_zlib: |
| zlib_inflateEnd(&strm); |
| out_free_buf: |
| kfree(buf); |
| out_free: |
| kfree(strm.workspace); |
| out: |
| return retval; |
| } |
| |
| #endif /* CONFIG_BINFMT_ZFLAT */ |
| |
| /****************************************************************************/ |
| |
| static abi_ulong |
| calc_reloc(abi_ulong r, struct lib_info *p, int curid, int internalp) |
| { |
| abi_ulong addr; |
| int id; |
| abi_ulong start_brk; |
| abi_ulong start_data; |
| abi_ulong text_len; |
| abi_ulong start_code; |
| |
| #ifdef CONFIG_BINFMT_SHARED_FLAT |
| #error needs checking |
| if (r == 0) |
| id = curid; /* Relocs of 0 are always self referring */ |
| else { |
| id = (r >> 24) & 0xff; /* Find ID for this reloc */ |
| r &= 0x00ffffff; /* Trim ID off here */ |
| } |
| if (id >= MAX_SHARED_LIBS) { |
| fprintf(stderr, "BINFMT_FLAT: reference 0x%x to shared library %d\n", |
| (unsigned) r, id); |
| goto failed; |
| } |
| if (curid != id) { |
| if (internalp) { |
| fprintf(stderr, "BINFMT_FLAT: reloc address 0x%x not " |
| "in same module (%d != %d)\n", |
| (unsigned) r, curid, id); |
| goto failed; |
| } else if ( ! p[id].loaded && |
| load_flat_shared_library(id, p) > (unsigned long) -4096) { |
| fprintf(stderr, "BINFMT_FLAT: failed to load library %d\n", id); |
| goto failed; |
| } |
| /* Check versioning information (i.e. time stamps) */ |
| if (p[id].build_date && p[curid].build_date |
| && p[curid].build_date < p[id].build_date) { |
| fprintf(stderr, "BINFMT_FLAT: library %d is younger than %d\n", |
| id, curid); |
| goto failed; |
| } |
| } |
| #else |
| id = 0; |
| #endif |
| |
| start_brk = p[id].start_brk; |
| start_data = p[id].start_data; |
| start_code = p[id].start_code; |
| text_len = p[id].text_len; |
| |
| if (!flat_reloc_valid(r, start_brk - start_data + text_len)) { |
| fprintf(stderr, "BINFMT_FLAT: reloc outside program 0x%x " |
| "(0 - 0x%x/0x%x)\n", |
| (int) r,(int)(start_brk-start_code),(int)text_len); |
| goto failed; |
| } |
| |
| if (r < text_len) /* In text segment */ |
| addr = r + start_code; |
| else /* In data segment */ |
| addr = r - text_len + start_data; |
| |
| /* Range checked already above so doing the range tests is redundant...*/ |
| return(addr); |
| |
| failed: |
| abort(); |
| return RELOC_FAILED; |
| } |
| |
| /****************************************************************************/ |
| |
| /* ??? This does not handle endianness correctly. */ |
| static void old_reloc(struct lib_info *libinfo, uint32_t rl) |
| { |
| #ifdef DEBUG |
| const char *segment[] = { "TEXT", "DATA", "BSS", "*UNKNOWN*" }; |
| #endif |
| uint32_t *ptr; |
| uint32_t offset; |
| int reloc_type; |
| |
| offset = rl & 0x3fffffff; |
| reloc_type = rl >> 30; |
| /* ??? How to handle this? */ |
| #if defined(CONFIG_COLDFIRE) |
| ptr = (uint32_t *) ((unsigned long) libinfo->start_code + offset); |
| #else |
| ptr = (uint32_t *) ((unsigned long) libinfo->start_data + offset); |
| #endif |
| |
| #ifdef DEBUG |
| fprintf(stderr, "Relocation of variable at DATASEG+%x " |
| "(address %p, currently %x) into segment %s\n", |
| offset, ptr, (int)*ptr, segment[reloc_type]); |
| #endif |
| |
| switch (reloc_type) { |
| case OLD_FLAT_RELOC_TYPE_TEXT: |
| *ptr += libinfo->start_code; |
| break; |
| case OLD_FLAT_RELOC_TYPE_DATA: |
| *ptr += libinfo->start_data; |
| break; |
| case OLD_FLAT_RELOC_TYPE_BSS: |
| *ptr += libinfo->end_data; |
| break; |
| default: |
| fprintf(stderr, "BINFMT_FLAT: Unknown relocation type=%x\n", |
| reloc_type); |
| break; |
| } |
| DBG_FLT("Relocation became %x\n", (int)*ptr); |
| } |
| |
| /****************************************************************************/ |
| |
| static int load_flat_file(struct linux_binprm * bprm, |
| struct lib_info *libinfo, int id, abi_ulong *extra_stack) |
| { |
| struct flat_hdr * hdr; |
| abi_ulong textpos = 0, datapos = 0, result; |
| abi_ulong realdatastart = 0; |
| abi_ulong text_len, data_len, bss_len, stack_len, flags; |
| abi_ulong memp = 0; /* for finding the brk area */ |
| abi_ulong extra; |
| abi_ulong reloc = 0, rp; |
| int i, rev, relocs = 0; |
| abi_ulong fpos; |
| abi_ulong start_code, end_code; |
| abi_ulong indx_len; |
| |
| hdr = ((struct flat_hdr *) bprm->buf); /* exec-header */ |
| |
| text_len = ntohl(hdr->data_start); |
| data_len = ntohl(hdr->data_end) - ntohl(hdr->data_start); |
| bss_len = ntohl(hdr->bss_end) - ntohl(hdr->data_end); |
| stack_len = ntohl(hdr->stack_size); |
| if (extra_stack) { |
| stack_len += *extra_stack; |
| *extra_stack = stack_len; |
| } |
| relocs = ntohl(hdr->reloc_count); |
| flags = ntohl(hdr->flags); |
| rev = ntohl(hdr->rev); |
| |
| DBG_FLT("BINFMT_FLAT: Loading file: %s\n", bprm->filename); |
| |
| if (rev != FLAT_VERSION && rev != OLD_FLAT_VERSION) { |
| fprintf(stderr, "BINFMT_FLAT: bad magic/rev (0x%x, need 0x%x)\n", |
| rev, (int) FLAT_VERSION); |
| return -ENOEXEC; |
| } |
| |
| /* Don't allow old format executables to use shared libraries */ |
| if (rev == OLD_FLAT_VERSION && id != 0) { |
| fprintf(stderr, "BINFMT_FLAT: shared libraries are not available\n"); |
| return -ENOEXEC; |
| } |
| |
| /* |
| * fix up the flags for the older format, there were all kinds |
| * of endian hacks, this only works for the simple cases |
| */ |
| if (rev == OLD_FLAT_VERSION && flat_old_ram_flag(flags)) |
| flags = FLAT_FLAG_RAM; |
| |
| #ifndef CONFIG_BINFMT_ZFLAT |
| if (flags & (FLAT_FLAG_GZIP|FLAT_FLAG_GZDATA)) { |
| fprintf(stderr, "Support for ZFLAT executables is not enabled\n"); |
| return -ENOEXEC; |
| } |
| #endif |
| |
| /* |
| * calculate the extra space we need to map in |
| */ |
| extra = relocs * sizeof(abi_ulong); |
| if (extra < bss_len + stack_len) |
| extra = bss_len + stack_len; |
| |
| /* Add space for library base pointers. Make sure this does not |
| misalign the doesn't misalign the data segment. */ |
| indx_len = MAX_SHARED_LIBS * sizeof(abi_ulong); |
| indx_len = (indx_len + 15) & ~(abi_ulong)15; |
| |
| /* |
| * there are a couple of cases here, the separate code/data |
| * case, and then the fully copied to RAM case which lumps |
| * it all together. |
| */ |
| if ((flags & (FLAT_FLAG_RAM|FLAT_FLAG_GZIP)) == 0) { |
| /* |
| * this should give us a ROM ptr, but if it doesn't we don't |
| * really care |
| */ |
| DBG_FLT("BINFMT_FLAT: ROM mapping of file (we hope)\n"); |
| |
| textpos = target_mmap(0, text_len, PROT_READ|PROT_EXEC, |
| MAP_PRIVATE, bprm->fd, 0); |
| if (textpos == -1) { |
| fprintf(stderr, "Unable to mmap process text\n"); |
| return -1; |
| } |
| |
| realdatastart = target_mmap(0, data_len + extra + indx_len, |
| PROT_READ|PROT_WRITE|PROT_EXEC, |
| MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); |
| |
| if (realdatastart == -1) { |
| fprintf(stderr, "Unable to allocate RAM for process data\n"); |
| return realdatastart; |
| } |
| datapos = realdatastart + indx_len; |
| |
| DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n", |
| (int)(data_len + bss_len + stack_len), (int)datapos); |
| |
| fpos = ntohl(hdr->data_start); |
| #ifdef CONFIG_BINFMT_ZFLAT |
| if (flags & FLAT_FLAG_GZDATA) { |
| result = decompress_exec(bprm, fpos, (char *) datapos, |
| data_len + (relocs * sizeof(abi_ulong))) |
| } else |
| #endif |
| { |
| result = target_pread(bprm->fd, datapos, |
| data_len + (relocs * sizeof(abi_ulong)), |
| fpos); |
| } |
| if (result < 0) { |
| fprintf(stderr, "Unable to read data+bss\n"); |
| return result; |
| } |
| |
| reloc = datapos + (ntohl(hdr->reloc_start) - text_len); |
| memp = realdatastart; |
| |
| } else { |
| |
| textpos = target_mmap(0, text_len + data_len + extra + indx_len, |
| PROT_READ | PROT_EXEC | PROT_WRITE, |
| MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); |
| if (textpos == -1 ) { |
| fprintf(stderr, "Unable to allocate RAM for process text/data\n"); |
| return -1; |
| } |
| |
| realdatastart = textpos + ntohl(hdr->data_start); |
| datapos = realdatastart + indx_len; |
| reloc = (textpos + ntohl(hdr->reloc_start) + indx_len); |
| memp = textpos; |
| |
| #ifdef CONFIG_BINFMT_ZFLAT |
| #error code needs checking |
| /* |
| * load it all in and treat it like a RAM load from now on |
| */ |
| if (flags & FLAT_FLAG_GZIP) { |
| result = decompress_exec(bprm, sizeof (struct flat_hdr), |
| (((char *) textpos) + sizeof (struct flat_hdr)), |
| (text_len + data_len + (relocs * sizeof(unsigned long)) |
| - sizeof (struct flat_hdr)), |
| 0); |
| memmove((void *) datapos, (void *) realdatastart, |
| data_len + (relocs * sizeof(unsigned long))); |
| } else if (flags & FLAT_FLAG_GZDATA) { |
| fpos = 0; |
| result = bprm->file->f_op->read(bprm->file, |
| (char *) textpos, text_len, &fpos); |
| if (result < (unsigned long) -4096) |
| result = decompress_exec(bprm, text_len, (char *) datapos, |
| data_len + (relocs * sizeof(unsigned long)), 0); |
| } |
| else |
| #endif |
| { |
| result = target_pread(bprm->fd, textpos, |
| text_len, 0); |
| if (result >= 0) { |
| result = target_pread(bprm->fd, datapos, |
| data_len + (relocs * sizeof(abi_ulong)), |
| ntohl(hdr->data_start)); |
| } |
| } |
| if (result < 0) { |
| fprintf(stderr, "Unable to read code+data+bss\n"); |
| return result; |
| } |
| } |
| |
| DBG_FLT("Mapping is 0x%x, Entry point is 0x%x, data_start is 0x%x\n", |
| (int)textpos, 0x00ffffff&ntohl(hdr->entry), |
| ntohl(hdr->data_start)); |
| |
| /* The main program needs a little extra setup in the task structure */ |
| start_code = textpos + sizeof (struct flat_hdr); |
| end_code = textpos + text_len; |
| |
| DBG_FLT("%s %s: TEXT=%x-%x DATA=%x-%x BSS=%x-%x\n", |
| id ? "Lib" : "Load", bprm->filename, |
| (int) start_code, (int) end_code, |
| (int) datapos, |
| (int) (datapos + data_len), |
| (int) (datapos + data_len), |
| (int) (((datapos + data_len + bss_len) + 3) & ~3)); |
| |
| text_len -= sizeof(struct flat_hdr); /* the real code len */ |
| |
| /* Store the current module values into the global library structure */ |
| libinfo[id].start_code = start_code; |
| libinfo[id].start_data = datapos; |
| libinfo[id].end_data = datapos + data_len; |
| libinfo[id].start_brk = datapos + data_len + bss_len; |
| libinfo[id].text_len = text_len; |
| libinfo[id].loaded = 1; |
| libinfo[id].entry = (0x00ffffff & ntohl(hdr->entry)) + textpos; |
| libinfo[id].build_date = ntohl(hdr->build_date); |
| |
| /* |
| * We just load the allocations into some temporary memory to |
| * help simplify all this mumbo jumbo |
| * |
| * We've got two different sections of relocation entries. |
| * The first is the GOT which resides at the begining of the data segment |
| * and is terminated with a -1. This one can be relocated in place. |
| * The second is the extra relocation entries tacked after the image's |
| * data segment. These require a little more processing as the entry is |
| * really an offset into the image which contains an offset into the |
| * image. |
| */ |
| if (flags & FLAT_FLAG_GOTPIC) { |
| rp = datapos; |
| while (1) { |
| abi_ulong addr; |
| if (get_user_ual(addr, rp)) |
| return -EFAULT; |
| if (addr == -1) |
| break; |
| if (addr) { |
| addr = calc_reloc(addr, libinfo, id, 0); |
| if (addr == RELOC_FAILED) |
| return -ENOEXEC; |
| if (put_user_ual(addr, rp)) |
| return -EFAULT; |
| } |
| rp += sizeof(abi_ulong); |
| } |
| } |
| |
| /* |
| * Now run through the relocation entries. |
| * We've got to be careful here as C++ produces relocatable zero |
| * entries in the constructor and destructor tables which are then |
| * tested for being not zero (which will always occur unless we're |
| * based from address zero). This causes an endless loop as __start |
| * is at zero. The solution used is to not relocate zero addresses. |
| * This has the negative side effect of not allowing a global data |
| * reference to be statically initialised to _stext (I've moved |
| * __start to address 4 so that is okay). |
| */ |
| if (rev > OLD_FLAT_VERSION) { |
| for (i = 0; i < relocs; i++) { |
| abi_ulong addr, relval; |
| |
| /* Get the address of the pointer to be |
| relocated (of course, the address has to be |
| relocated first). */ |
| if (get_user_ual(relval, reloc + i * sizeof(abi_ulong))) |
| return -EFAULT; |
| addr = flat_get_relocate_addr(relval); |
| rp = calc_reloc(addr, libinfo, id, 1); |
| if (rp == RELOC_FAILED) |
| return -ENOEXEC; |
| |
| /* Get the pointer's value. */ |
| if (get_user_ual(addr, rp)) |
| return -EFAULT; |
| if (addr != 0) { |
| /* |
| * Do the relocation. PIC relocs in the data section are |
| * already in target order |
| */ |
| |
| #ifndef TARGET_WORDS_BIGENDIAN |
| if ((flags & FLAT_FLAG_GOTPIC) == 0) |
| addr = bswap32(addr); |
| #endif |
| addr = calc_reloc(addr, libinfo, id, 0); |
| if (addr == RELOC_FAILED) |
| return -ENOEXEC; |
| |
| /* Write back the relocated pointer. */ |
| if (put_user_ual(addr, rp)) |
| return -EFAULT; |
| } |
| } |
| } else { |
| for (i = 0; i < relocs; i++) { |
| abi_ulong relval; |
| if (get_user_ual(relval, reloc + i * sizeof(abi_ulong))) |
| return -EFAULT; |
| old_reloc(&libinfo[0], relval); |
| } |
| } |
| |
| /* zero the BSS. */ |
| memset((void *)((unsigned long)datapos + data_len), 0, bss_len); |
| |
| return 0; |
| } |
| |
| |
| /****************************************************************************/ |
| #ifdef CONFIG_BINFMT_SHARED_FLAT |
| |
| /* |
| * Load a shared library into memory. The library gets its own data |
| * segment (including bss) but not argv/argc/environ. |
| */ |
| |
| static int load_flat_shared_library(int id, struct lib_info *libs) |
| { |
| struct linux_binprm bprm; |
| int res; |
| char buf[16]; |
| |
| /* Create the file name */ |
| sprintf(buf, "/lib/lib%d.so", id); |
| |
| /* Open the file up */ |
| bprm.filename = buf; |
| bprm.file = open_exec(bprm.filename); |
| res = PTR_ERR(bprm.file); |
| if (IS_ERR(bprm.file)) |
| return res; |
| |
| res = prepare_binprm(&bprm); |
| |
| if (res <= (unsigned long)-4096) |
| res = load_flat_file(&bprm, libs, id, NULL); |
| if (bprm.file) { |
| allow_write_access(bprm.file); |
| fput(bprm.file); |
| bprm.file = NULL; |
| } |
| return(res); |
| } |
| |
| #endif /* CONFIG_BINFMT_SHARED_FLAT */ |
| |
| int load_flt_binary(struct linux_binprm * bprm, struct target_pt_regs * regs, |
| struct image_info * info) |
| { |
| struct lib_info libinfo[MAX_SHARED_LIBS]; |
| abi_ulong p = bprm->p; |
| abi_ulong stack_len; |
| abi_ulong start_addr; |
| abi_ulong sp; |
| int res; |
| int i, j; |
| |
| memset(libinfo, 0, sizeof(libinfo)); |
| /* |
| * We have to add the size of our arguments to our stack size |
| * otherwise it's too easy for users to create stack overflows |
| * by passing in a huge argument list. And yes, we have to be |
| * pedantic and include space for the argv/envp array as it may have |
| * a lot of entries. |
| */ |
| #define TOP_OF_ARGS (TARGET_PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *)) |
| stack_len = TOP_OF_ARGS - bprm->p; /* the strings */ |
| stack_len += (bprm->argc + 1) * 4; /* the argv array */ |
| stack_len += (bprm->envc + 1) * 4; /* the envp array */ |
| |
| |
| res = load_flat_file(bprm, libinfo, 0, &stack_len); |
| if (res > (unsigned long)-4096) |
| return res; |
| |
| /* Update data segment pointers for all libraries */ |
| for (i=0; i<MAX_SHARED_LIBS; i++) { |
| if (libinfo[i].loaded) { |
| abi_ulong p; |
| p = libinfo[i].start_data; |
| for (j=0; j<MAX_SHARED_LIBS; j++) { |
| p -= 4; |
| /* FIXME - handle put_user() failures */ |
| if (put_user_ual(libinfo[j].loaded |
| ? libinfo[j].start_data |
| : UNLOADED_LIB, |
| p)) |
| return -EFAULT; |
| } |
| } |
| } |
| |
| p = ((libinfo[0].start_brk + stack_len + 3) & ~3) - 4; |
| DBG_FLT("p=%x\n", (int)p); |
| |
| /* Copy argv/envp. */ |
| p = copy_strings(p, bprm->envc, bprm->envp); |
| p = copy_strings(p, bprm->argc, bprm->argv); |
| /* Align stack. */ |
| sp = p & ~(abi_ulong)(sizeof(abi_ulong) - 1); |
| /* Enforce final stack alignment of 16 bytes. This is sufficient |
| for all current targets, and excess alignment is harmless. */ |
| stack_len = bprm->envc + bprm->argc + 2; |
| stack_len += 3; /* argc, arvg, argp */ |
| stack_len *= sizeof(abi_ulong); |
| if ((sp + stack_len) & 15) |
| sp -= 16 - ((sp + stack_len) & 15); |
| sp = loader_build_argptr(bprm->envc, bprm->argc, sp, p, 1); |
| |
| /* Fake some return addresses to ensure the call chain will |
| * initialise library in order for us. We are required to call |
| * lib 1 first, then 2, ... and finally the main program (id 0). |
| */ |
| start_addr = libinfo[0].entry; |
| |
| #ifdef CONFIG_BINFMT_SHARED_FLAT |
| #error here |
| for (i = MAX_SHARED_LIBS-1; i>0; i--) { |
| if (libinfo[i].loaded) { |
| /* Push previos first to call address */ |
| --sp; |
| if (put_user_ual(start_addr, sp)) |
| return -EFAULT; |
| start_addr = libinfo[i].entry; |
| } |
| } |
| #endif |
| |
| /* Stash our initial stack pointer into the mm structure */ |
| info->start_code = libinfo[0].start_code; |
| info->end_code = libinfo[0].start_code = libinfo[0].text_len; |
| info->start_data = libinfo[0].start_data; |
| info->end_data = libinfo[0].end_data; |
| info->start_brk = libinfo[0].start_brk; |
| info->start_stack = sp; |
| info->stack_limit = libinfo[0].start_brk; |
| info->entry = start_addr; |
| info->code_offset = info->start_code; |
| info->data_offset = info->start_data - libinfo[0].text_len; |
| |
| DBG_FLT("start_thread(entry=0x%x, start_stack=0x%x)\n", |
| (int)info->entry, (int)info->start_stack); |
| |
| return 0; |
| } |
