| /* |
| * Target definitions of errnos. These may be overridden by an |
| * architecture specific header if needed. |
| * |
| * Taken from asm-generic/errno-base.h and asm-generic/errno.h |
| */ |
| #define TARGET_EPERM 1 /* Operation not permitted */ |
| #define TARGET_ENOENT 2 /* No such file or directory */ |
| #define TARGET_ESRCH 3 /* No such process */ |
| #define TARGET_EINTR 4 /* Interrupted system call */ |
| #define TARGET_EIO 5 /* I/O error */ |
| #define TARGET_ENXIO 6 /* No such device or address */ |
| #define TARGET_E2BIG 7 /* Argument list too long */ |
| #define TARGET_ENOEXEC 8 /* TARGET_Exec format error */ |
| #define TARGET_EBADF 9 /* Bad file number */ |
| #define TARGET_ECHILD 10 /* No child processes */ |
| #define TARGET_EAGAIN 11 /* Try again */ |
| #define TARGET_ENOMEM 12 /* Out of memory */ |
| #define TARGET_EACCES 13 /* Permission denied */ |
| #define TARGET_EFAULT 14 /* Bad address */ |
| #define TARGET_ENOTBLK 15 /* Block device required */ |
| #define TARGET_EBUSY 16 /* Device or resource busy */ |
| #define TARGET_EEXIST 17 /* File exists */ |
| #define TARGET_EXDEV 18 /* Cross-device link */ |
| #define TARGET_ENODEV 19 /* No such device */ |
| #define TARGET_ENOTDIR 20 /* Not a directory */ |
| #define TARGET_EISDIR 21 /* Is a directory */ |
| #define TARGET_EINVAL 22 /* Invalid argument */ |
| #define TARGET_ENFILE 23 /* File table overflow */ |
| #define TARGET_EMFILE 24 /* Too many open files */ |
| #define TARGET_ENOTTY 25 /* Not a typewriter */ |
| #define TARGET_ETXTBSY 26 /* Text file busy */ |
| #define TARGET_EFBIG 27 /* File too large */ |
| #define TARGET_ENOSPC 28 /* No space left on device */ |
| #define TARGET_ESPIPE 29 /* Illegal seek */ |
| #define TARGET_EROFS 30 /* Read-only file system */ |
| #define TARGET_EMLINK 31 /* Too many links */ |
| #define TARGET_EPIPE 32 /* Broken pipe */ |
| #define TARGET_EDOM 33 /* Math argument out of domain of func */ |
| #define TARGET_ERANGE 34 /* Math result not representable */ |
| |
| #define TARGET_EDEADLK 35 /* Resource deadlock would occur */ |
| #define TARGET_ENAMETOOLONG 36 /* File name too long */ |
| #define TARGET_ENOLCK 37 /* No record locks available */ |
| #define TARGET_ENOSYS 38 /* Function not implemented */ |
| #define TARGET_ENOTEMPTY 39 /* Directory not empty */ |
| #define TARGET_ELOOP 40 /* Too many symbolic links encountered */ |
| |
| #define TARGET_ENOMSG 42 /* No message of desired type */ |
| #define TARGET_EIDRM 43 /* Identifier removed */ |
| #define TARGET_ECHRNG 44 /* Channel number out of range */ |
| #define TARGET_EL2NSYNC 45 /* Level 2 not synchronized */ |
| #define TARGET_EL3HLT 46 /* Level 3 halted */ |
| #define TARGET_EL3RST 47 /* Level 3 reset */ |
| #define TARGET_ELNRNG 48 /* Link number out of range */ |
| #define TARGET_EUNATCH 49 /* Protocol driver not attached */ |
| #define TARGET_ENOCSI 50 /* No CSI structure available */ |
| #define TARGET_EL2HLT 51 /* Level 2 halted */ |
| #define TARGET_EBADE 52 /* Invalid exchange */ |
| #define TARGET_EBADR 53 /* Invalid request descriptor */ |
| #define TARGET_EXFULL 54 /* TARGET_Exchange full */ |
| #define TARGET_ENOANO 55 /* No anode */ |
| #define TARGET_EBADRQC 56 /* Invalid request code */ |
| #define TARGET_EBADSLT 57 /* Invalid slot */ |
| |
| #define TARGET_EBFONT 59 /* Bad font file format */ |
| #define TARGET_ENOSTR 60 /* Device not a stream */ |
| #define TARGET_ENODATA 61 /* No data available */ |
| #define TARGET_ETIME 62 /* Timer expired */ |
| #define TARGET_ENOSR 63 /* Out of streams resources */ |
| #define TARGET_ENONET 64 /* Machine is not on the network */ |
| #define TARGET_ENOPKG 65 /* Package not installed */ |
| #define TARGET_EREMOTE 66 /* Object is remote */ |
| #define TARGET_ENOLINK 67 /* Link has been severed */ |
| #define TARGET_EADV 68 /* Advertise error */ |
| #define TARGET_ESRMNT 69 /* Srmount error */ |
| #define TARGET_ECOMM 70 /* Communication error on send */ |
| #define TARGET_EPROTO 71 /* Protocol error */ |
| #define TARGET_EMULTIHOP 72 /* Multihop attempted */ |
| #define TARGET_EDOTDOT 73 /* RFS specific error */ |
| #define TARGET_EBADMSG 74 /* Not a data message */ |
| #define TARGET_EOVERFLOW 75 /* Value too large for defined data type */ |
| #define TARGET_ENOTUNIQ 76 /* Name not unique on network */ |
| #define TARGET_EBADFD 77 /* File descriptor in bad state */ |
| #define TARGET_EREMCHG 78 /* Remote address changed */ |
| #define TARGET_ELIBACC 79 /* Can not access a needed shared library */ |
| #define TARGET_ELIBBAD 80 /* Accessing a corrupted shared library */ |
| #define TARGET_ELIBSCN 81 /* .lib section in a.out corrupted */ |
| #define TARGET_ELIBMAX 82 /* Attempting to link in too many shared libraries */ |
| #define TARGET_ELIBEXEC 83 /* Cannot exec a shared library directly */ |
| #define TARGET_EILSEQ 84 /* Illegal byte sequence */ |
| #define TARGET_ERESTART 85 /* Interrupted system call should be restarted */ |
| #define TARGET_ESTRPIPE 86 /* Streams pipe error */ |
| #define TARGET_EUSERS 87 /* Too many users */ |
| #define TARGET_ENOTSOCK 88 /* Socket operation on non-socket */ |
| #define TARGET_EDESTADDRREQ 89 /* Destination address required */ |
| #define TARGET_EMSGSIZE 90 /* Message too long */ |
| #define TARGET_EPROTOTYPE 91 /* Protocol wrong type for socket */ |
| #define TARGET_ENOPROTOOPT 92 /* Protocol not available */ |
| #define TARGET_EPROTONOSUPPORT 93 /* Protocol not supported */ |
| #define TARGET_ESOCKTNOSUPPORT 94 /* Socket type not supported */ |
| #define TARGET_EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ |
| #define TARGET_EPFNOSUPPORT 96 /* Protocol family not supported */ |
| #define TARGET_EAFNOSUPPORT 97 /* Address family not supported by protocol */ |
| #define TARGET_EADDRINUSE 98 /* Address already in use */ |
| #define TARGET_EADDRNOTAVAIL 99 /* Cannot assign requested address */ |
| #define TARGET_ENETDOWN 100 /* Network is down */ |
| #define TARGET_ENETUNREACH 101 /* Network is unreachable */ |
| #define TARGET_ENETRESET 102 /* Network dropped connection because of reset */ |
| #define TARGET_ECONNABORTED 103 /* Software caused connection abort */ |
| #define TARGET_ECONNRESET 104 /* Connection reset by peer */ |
| #define TARGET_ENOBUFS 105 /* No buffer space available */ |
| #define TARGET_EISCONN 106 /* Transport endpoint is already connected */ |
| #define TARGET_ENOTCONN 107 /* Transport endpoint is not connected */ |
| #define TARGET_ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ |
| #define TARGET_ETOOMANYREFS 109 /* Too many references: cannot splice */ |
| #define TARGET_ETIMEDOUT 110 /* Connection timed out */ |
| #define TARGET_ECONNREFUSED 111 /* Connection refused */ |
| #define TARGET_EHOSTDOWN 112 /* Host is down */ |
| #define TARGET_EHOSTUNREACH 113 /* No route to host */ |
| #define TARGET_EALREADY 114 /* Operation already in progress */ |
| #define TARGET_EINPROGRESS 115 /* Operation now in progress */ |
| #define TARGET_ESTALE 116 /* Stale NFS file handle */ |
| #define TARGET_EUCLEAN 117 /* Structure needs cleaning */ |
| #define TARGET_ENOTNAM 118 /* Not a XENIX named type file */ |
| #define TARGET_ENAVAIL 119 /* No XENIX semaphores available */ |
| #define TARGET_EISNAM 120 /* Is a named type file */ |
| #define TARGET_EREMOTEIO 121 /* Remote I/O error */ |
| #define TARGET_EDQUOT 122 /* Quota exceeded */ |
| |
| #define TARGET_ENOMEDIUM 123 /* No medium found */ |
| #define TARGET_EMEDIUMTYPE 124 /* Wrong medium type */ |
| #define TARGET_ECANCELED 125 /* Operation Canceled */ |
| #define TARGET_ENOKEY 126 /* Required key not available */ |
| #define TARGET_EKEYEXPIRED 127 /* Key has expired */ |
| #define TARGET_EKEYREVOKED 128 /* Key has been revoked */ |
| #define TARGET_EKEYREJECTED 129 /* Key was rejected by service */ |
| |
| /* for robust mutexes */ |
| #define TARGET_EOWNERDEAD 130 /* Owner died */ |
| #define TARGET_ENOTRECOVERABLE 131 /* State not recoverable */ |
| |
| #define TARGET_ERFKILL 132 /* Operation not possible due to RF-kill */ |
| #define TARGET_EHWPOISON 133 /* Memory page has hardware error */ |
| |
| /* QEMU internal, not visible to the guest. This is returned when a |
| * system call should be restarted, to tell the main loop that it |
| * should wind the guest PC backwards so it will re-execute the syscall |
| * after handling any pending signals. They match with the ones the guest |
| * kernel uses for the same purpose. |
| */ |
| #define TARGET_ERESTARTSYS 512 /* Restart system call (if SA_RESTART) */ |
| |
| /* QEMU internal, not visible to the guest. This is returned by the |
| * do_sigreturn() code after a successful sigreturn syscall, to indicate |
| * that it has correctly set the guest registers and so the main loop |
| * should not touch them. We use the value the guest would use for |
| * ERESTART_NOINTR (which is kernel internal) to guarantee that we won't |
| * clash with a valid guest errno now or in the future. |
| */ |
| #define TARGET_QEMU_ESIGRETURN 513 /* Return from signal */ |
