Google Git
Sign in
qemu / qemu / 9005f928447841ed253e000d5e8220e381872cb0 / . / target / arm / cpu.h
blob: 3841359d0f13d6ad085a937dc958356f174b6b69 [file] [log] [blame]
/*
* ARM virtual CPU header
*
* Copyright (c) 2003 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef ARM_CPU_H
#define ARM_CPU_H
#include "kvm-consts.h"
#include "qemu/cpu-float.h"
#include "hw/registerfields.h"
#include "cpu-qom.h"
#include "exec/cpu-defs.h"
#include "exec/gdbstub.h"
#include "exec/page-protection.h"
#include "qapi/qapi-types-common.h"
#include "target/arm/multiprocessing.h"
#include "target/arm/gtimer.h"
#ifdef TARGET_AARCH64
#define KVM_HAVE_MCE_INJECTION 1
#endif
#define EXCP_UDEF 1 /* undefined instruction */
#define EXCP_SWI 2 /* software interrupt */
#define EXCP_PREFETCH_ABORT 3
#define EXCP_DATA_ABORT 4
#define EXCP_IRQ 5
#define EXCP_FIQ 6
#define EXCP_BKPT 7
#define EXCP_EXCEPTION_EXIT 8 /* Return from v7M exception. */
#define EXCP_KERNEL_TRAP 9 /* Jumped to kernel code page. */
#define EXCP_HVC 11 /* HyperVisor Call */
#define EXCP_HYP_TRAP 12
#define EXCP_SMC 13 /* Secure Monitor Call */
#define EXCP_VIRQ 14
#define EXCP_VFIQ 15
#define EXCP_SEMIHOST 16 /* semihosting call */
#define EXCP_NOCP 17 /* v7M NOCP UsageFault */
#define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */
#define EXCP_STKOF 19 /* v8M STKOF UsageFault */
#define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */
#define EXCP_LSERR 21 /* v8M LSERR SecureFault */
#define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */
#define EXCP_DIVBYZERO 23 /* v7M DIVBYZERO UsageFault */
#define EXCP_VSERR 24
#define EXCP_GPC 25 /* v9 Granule Protection Check Fault */
#define EXCP_NMI 26
#define EXCP_VINMI 27
#define EXCP_VFNMI 28
/* NB: add new EXCP_ defines to the array in arm_log_exception() too */
#define ARMV7M_EXCP_RESET 1
#define ARMV7M_EXCP_NMI 2
#define ARMV7M_EXCP_HARD 3
#define ARMV7M_EXCP_MEM 4
#define ARMV7M_EXCP_BUS 5
#define ARMV7M_EXCP_USAGE 6
#define ARMV7M_EXCP_SECURE 7
#define ARMV7M_EXCP_SVC 11
#define ARMV7M_EXCP_DEBUG 12
#define ARMV7M_EXCP_PENDSV 14
#define ARMV7M_EXCP_SYSTICK 15
/* ARM-specific interrupt pending bits. */
#define CPU_INTERRUPT_FIQ CPU_INTERRUPT_TGT_EXT_1
#define CPU_INTERRUPT_VIRQ CPU_INTERRUPT_TGT_EXT_2
#define CPU_INTERRUPT_VFIQ CPU_INTERRUPT_TGT_EXT_3
#define CPU_INTERRUPT_VSERR CPU_INTERRUPT_TGT_INT_0
#define CPU_INTERRUPT_NMI CPU_INTERRUPT_TGT_EXT_4
#define CPU_INTERRUPT_VINMI CPU_INTERRUPT_TGT_EXT_0
#define CPU_INTERRUPT_VFNMI CPU_INTERRUPT_TGT_INT_1
/* The usual mapping for an AArch64 system register to its AArch32
* counterpart is for the 32 bit world to have access to the lower
* half only (with writes leaving the upper half untouched). It's
* therefore useful to be able to pass TCG the offset of the least
* significant half of a uint64_t struct member.
*/
#if HOST_BIG_ENDIAN
#define offsetoflow32(S, M) (offsetof(S, M) + sizeof(uint32_t))
#define offsetofhigh32(S, M) offsetof(S, M)
#else
#define offsetoflow32(S, M) offsetof(S, M)
#define offsetofhigh32(S, M) (offsetof(S, M) + sizeof(uint32_t))
#endif
/* ARM-specific extra insn start words:
* 1: Conditional execution bits
* 2: Partial exception syndrome for data aborts
*/
#define TARGET_INSN_START_EXTRA_WORDS 2
/* The 2nd extra word holding syndrome info for data aborts does not use
* the upper 6 bits nor the lower 13 bits. We mask and shift it down to
* help the sleb128 encoder do a better job.
* When restoring the CPU state, we shift it back up.
*/
#define ARM_INSN_START_WORD2_MASK ((1 << 26) - 1)
#define ARM_INSN_START_WORD2_SHIFT 13
/* We currently assume float and double are IEEE single and double
precision respectively.
Doing runtime conversions is tricky because VFP registers may contain
integer values (eg. as the result of a FTOSI instruction).
s<2n> maps to the least significant half of d<n>
s<2n+1> maps to the most significant half of d<n>
*/
/**
* DynamicGDBFeatureInfo:
* @desc: Contains the feature descriptions.
* @data: A union with data specific to the set of registers
* @cpregs_keys: Array that contains the corresponding Key of
* a given cpreg with the same order of the cpreg
* in the XML description.
*/
typedef struct DynamicGDBFeatureInfo {
GDBFeature desc;
union {
struct {
uint32_t *keys;
} cpregs;
} data;
} DynamicGDBFeatureInfo;
/* CPU state for each instance of a generic timer (in cp15 c14) */
typedef struct ARMGenericTimer {
uint64_t cval; /* Timer CompareValue register */
uint64_t ctl; /* Timer Control register */
} ARMGenericTimer;
/* Define a maximum sized vector register.
* For 32-bit, this is a 128-bit NEON/AdvSIMD register.
* For 64-bit, this is a 2048-bit SVE register.
*
* Note that the mapping between S, D, and Q views of the register bank
* differs between AArch64 and AArch32.
* In AArch32:
* Qn = regs[n].d[1]:regs[n].d[0]
* Dn = regs[n / 2].d[n & 1]
* Sn = regs[n / 4].d[n % 4 / 2],
* bits 31..0 for even n, and bits 63..32 for odd n
* (and regs[16] to regs[31] are inaccessible)
* In AArch64:
* Zn = regs[n].d[*]
* Qn = regs[n].d[1]:regs[n].d[0]
* Dn = regs[n].d[0]
* Sn = regs[n].d[0] bits 31..0
* Hn = regs[n].d[0] bits 15..0
*
* This corresponds to the architecturally defined mapping between
* the two execution states, and means we do not need to explicitly
* map these registers when changing states.
*
* Align the data for use with TCG host vector operations.
*/
#ifdef TARGET_AARCH64
# define ARM_MAX_VQ 16
#else
# define ARM_MAX_VQ 1
#endif
typedef struct ARMVectorReg {
uint64_t d[2 * ARM_MAX_VQ] QEMU_ALIGNED(16);
} ARMVectorReg;
#ifdef TARGET_AARCH64
/* In AArch32 mode, predicate registers do not exist at all. */
typedef struct ARMPredicateReg {
uint64_t p[DIV_ROUND_UP(2 * ARM_MAX_VQ, 8)] QEMU_ALIGNED(16);
} ARMPredicateReg;
/* In AArch32 mode, PAC keys do not exist at all. */
typedef struct ARMPACKey {
uint64_t lo, hi;
} ARMPACKey;
#endif
/* See the commentary above the TBFLAG field definitions. */
typedef struct CPUARMTBFlags {
uint32_t flags;
target_ulong flags2;
} CPUARMTBFlags;
typedef struct ARMMMUFaultInfo ARMMMUFaultInfo;
typedef struct NVICState NVICState;
typedef struct CPUArchState {
/* Regs for current mode. */
uint32_t regs[16];
/* 32/64 switch only happens when taking and returning from
* exceptions so the overlap semantics are taken care of then
* instead of having a complicated union.
*/
/* Regs for A64 mode. */
uint64_t xregs[32];
uint64_t pc;
/* PSTATE isn't an architectural register for ARMv8. However, it is
* convenient for us to assemble the underlying state into a 32 bit format
* identical to the architectural format used for the SPSR. (This is also
* what the Linux kernel's 'pstate' field in signal handlers and KVM's
* 'pstate' register are.) Of the PSTATE bits:
* NZCV are kept in the split out env->CF/VF/NF/ZF, (which have the same
* semantics as for AArch32, as described in the comments on each field)
* nRW (also known as M[4]) is kept, inverted, in env->aarch64
* DAIF (exception masks) are kept in env->daif
* BTYPE is kept in env->btype
* SM and ZA are kept in env->svcr
* all other bits are stored in their correct places in env->pstate
*/
uint32_t pstate;
bool aarch64; /* True if CPU is in aarch64 state; inverse of PSTATE.nRW */
bool thumb; /* True if CPU is in thumb mode; cpsr[5] */
/* Cached TBFLAGS state. See below for which bits are included. */
CPUARMTBFlags hflags;
/* Frequently accessed CPSR bits are stored separately for efficiency.
This contains all the other bits. Use cpsr_{read,write} to access
the whole CPSR. */
uint32_t uncached_cpsr;
uint32_t spsr;
/* Banked registers. */
uint64_t banked_spsr[8];
uint32_t banked_r13[8];
uint32_t banked_r14[8];
/* These hold r8-r12. */
uint32_t usr_regs[5];
uint32_t fiq_regs[5];
/* cpsr flag cache for faster execution */
uint32_t CF; /* 0 or 1 */
uint32_t VF; /* V is the bit 31. All other bits are undefined */
uint32_t NF; /* N is bit 31. All other bits are undefined. */
uint32_t ZF; /* Z set if zero. */
uint32_t QF; /* 0 or 1 */
uint32_t GE; /* cpsr[19:16] */
uint32_t condexec_bits; /* IT bits. cpsr[15:10,26:25]. */
uint32_t btype; /* BTI branch type. spsr[11:10]. */
uint64_t daif; /* exception masks, in the bits they are in PSTATE */
uint64_t svcr; /* PSTATE.{SM,ZA} in the bits they are in SVCR */
uint64_t elr_el[4]; /* AArch64 exception link regs */
uint64_t sp_el[4]; /* AArch64 banked stack pointers */
/* System control coprocessor (cp15) */
struct {
uint32_t c0_cpuid;
union { /* Cache size selection */
struct {
uint64_t _unused_csselr0;
uint64_t csselr_ns;
uint64_t _unused_csselr1;
uint64_t csselr_s;
};
uint64_t csselr_el[4];
};
union { /* System control register. */
struct {
uint64_t _unused_sctlr;
uint64_t sctlr_ns;
uint64_t hsctlr;
uint64_t sctlr_s;
};
uint64_t sctlr_el[4];
};
uint64_t vsctlr; /* Virtualization System control register. */
uint64_t cpacr_el1; /* Architectural feature access control register */
uint64_t cptr_el[4]; /* ARMv8 feature trap registers */
uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */
uint64_t sder; /* Secure debug enable register. */
uint32_t nsacr; /* Non-secure access control register. */
union { /* MMU translation table base 0. */
struct {
uint64_t _unused_ttbr0_0;
uint64_t ttbr0_ns;
uint64_t _unused_ttbr0_1;
uint64_t ttbr0_s;
};
uint64_t ttbr0_el[4];
};
union { /* MMU translation table base 1. */
struct {
uint64_t _unused_ttbr1_0;
uint64_t ttbr1_ns;
uint64_t _unused_ttbr1_1;
uint64_t ttbr1_s;
};
uint64_t ttbr1_el[4];
};
uint64_t vttbr_el2; /* Virtualization Translation Table Base. */
uint64_t vsttbr_el2; /* Secure Virtualization Translation Table. */
/* MMU translation table base control. */
uint64_t tcr_el[4];
uint64_t vtcr_el2; /* Virtualization Translation Control. */
uint64_t vstcr_el2; /* Secure Virtualization Translation Control. */
uint32_t c2_data; /* MPU data cacheable bits. */
uint32_t c2_insn; /* MPU instruction cacheable bits. */
union { /* MMU domain access control register
* MPU write buffer control.
*/
struct {
uint64_t dacr_ns;
uint64_t dacr_s;
};
struct {
uint64_t dacr32_el2;
};
};
uint32_t pmsav5_data_ap; /* PMSAv5 MPU data access permissions */
uint32_t pmsav5_insn_ap; /* PMSAv5 MPU insn access permissions */
uint64_t hcr_el2; /* Hypervisor configuration register */
uint64_t hcrx_el2; /* Extended Hypervisor configuration register */
uint64_t scr_el3; /* Secure configuration register. */
union { /* Fault status registers. */
struct {
uint64_t ifsr_ns;
uint64_t ifsr_s;
};
struct {
uint64_t ifsr32_el2;
};
};
union {
struct {
uint64_t _unused_dfsr;
uint64_t dfsr_ns;
uint64_t hsr;
uint64_t dfsr_s;
};
uint64_t esr_el[4];
};
uint32_t c6_region[8]; /* MPU base/size registers. */
union { /* Fault address registers. */
struct {
uint64_t _unused_far0;
#if HOST_BIG_ENDIAN
uint32_t ifar_ns;
uint32_t dfar_ns;
uint32_t ifar_s;
uint32_t dfar_s;
#else
uint32_t dfar_ns;
uint32_t ifar_ns;
uint32_t dfar_s;
uint32_t ifar_s;
#endif
uint64_t _unused_far3;
};
uint64_t far_el[4];
};
uint64_t hpfar_el2;
uint64_t hstr_el2;
union { /* Translation result. */
struct {
uint64_t _unused_par_0;
uint64_t par_ns;
uint64_t _unused_par_1;
uint64_t par_s;
};
uint64_t par_el[4];
};
uint32_t c9_insn; /* Cache lockdown registers. */
uint32_t c9_data;
uint64_t c9_pmcr; /* performance monitor control register */
uint64_t c9_pmcnten; /* perf monitor counter enables */
uint64_t c9_pmovsr; /* perf monitor overflow status */
uint64_t c9_pmuserenr; /* perf monitor user enable */
uint64_t c9_pmselr; /* perf monitor counter selection register */
uint64_t c9_pminten; /* perf monitor interrupt enables */
union { /* Memory attribute redirection */
struct {
#if HOST_BIG_ENDIAN
uint64_t _unused_mair_0;
uint32_t mair1_ns;
uint32_t mair0_ns;
uint64_t _unused_mair_1;
uint32_t mair1_s;
uint32_t mair0_s;
#else
uint64_t _unused_mair_0;
uint32_t mair0_ns;
uint32_t mair1_ns;
uint64_t _unused_mair_1;
uint32_t mair0_s;
uint32_t mair1_s;
#endif
};
uint64_t mair_el[4];
};
union { /* vector base address register */
struct {
uint64_t _unused_vbar;
uint64_t vbar_ns;
uint64_t hvbar;
uint64_t vbar_s;
};
uint64_t vbar_el[4];
};
uint32_t mvbar; /* (monitor) vector base address register */
uint64_t rvbar; /* rvbar sampled from rvbar property at reset */
struct { /* FCSE PID. */
uint32_t fcseidr_ns;
uint32_t fcseidr_s;
};
union { /* Context ID. */
struct {
uint64_t _unused_contextidr_0;
uint64_t contextidr_ns;
uint64_t _unused_contextidr_1;
uint64_t contextidr_s;
};
uint64_t contextidr_el[4];
};
union { /* User RW Thread register. */
struct {
uint64_t tpidrurw_ns;
uint64_t tpidrprw_ns;
uint64_t htpidr;
uint64_t _tpidr_el3;
};
uint64_t tpidr_el[4];
};
uint64_t tpidr2_el0;
/* The secure banks of these registers don't map anywhere */
uint64_t tpidrurw_s;
uint64_t tpidrprw_s;
uint64_t tpidruro_s;
union { /* User RO Thread register. */
uint64_t tpidruro_ns;
uint64_t tpidrro_el[1];
};
uint64_t c14_cntfrq; /* Counter Frequency register */
uint64_t c14_cntkctl; /* Timer Control register */
uint64_t cnthctl_el2; /* Counter/Timer Hyp Control register */
uint64_t cntvoff_el2; /* Counter Virtual Offset register */
uint64_t cntpoff_el2; /* Counter Physical Offset register */
ARMGenericTimer c14_timer[NUM_GTIMERS];
uint32_t c15_cpar; /* XScale Coprocessor Access Register */
uint32_t c15_ticonfig; /* TI925T configuration byte. */
uint32_t c15_i_max; /* Maximum D-cache dirty line index. */
uint32_t c15_i_min; /* Minimum D-cache dirty line index. */
uint32_t c15_threadid; /* TI debugger thread-ID. */
uint32_t c15_config_base_address; /* SCU base address. */
uint32_t c15_diagnostic; /* diagnostic register */
uint32_t c15_power_diagnostic;
uint32_t c15_power_control; /* power control */
uint64_t dbgbvr[16]; /* breakpoint value registers */
uint64_t dbgbcr[16]; /* breakpoint control registers */
uint64_t dbgwvr[16]; /* watchpoint value registers */
uint64_t dbgwcr[16]; /* watchpoint control registers */
uint64_t dbgclaim; /* DBGCLAIM bits */
uint64_t mdscr_el1;
uint64_t oslsr_el1; /* OS Lock Status */
uint64_t osdlr_el1; /* OS DoubleLock status */
uint64_t mdcr_el2;
uint64_t mdcr_el3;
/* Stores the architectural value of the counter *the last time it was
* updated* by pmccntr_op_start. Accesses should always be surrounded
* by pmccntr_op_start/pmccntr_op_finish to guarantee the latest
* architecturally-correct value is being read/set.
*/
uint64_t c15_ccnt;
/* Stores the delta between the architectural value and the underlying
* cycle count during normal operation. It is used to update c15_ccnt
* to be the correct architectural value before accesses. During
* accesses, c15_ccnt_delta contains the underlying count being used
* for the access, after which it reverts to the delta value in
* pmccntr_op_finish.
*/
uint64_t c15_ccnt_delta;
uint64_t c14_pmevcntr[31];
uint64_t c14_pmevcntr_delta[31];
uint64_t c14_pmevtyper[31];
uint64_t pmccfiltr_el0; /* Performance Monitor Filter Register */
uint64_t vpidr_el2; /* Virtualization Processor ID Register */
uint64_t vmpidr_el2; /* Virtualization Multiprocessor ID Register */
uint64_t tfsr_el[4]; /* tfsre0_el1 is index 0. */
uint64_t gcr_el1;
uint64_t rgsr_el1;
/* Minimal RAS registers */
uint64_t disr_el1;
uint64_t vdisr_el2;
uint64_t vsesr_el2;
/*
* Fine-Grained Trap registers. We store these as arrays so the
* access checking code doesn't have to manually select
* HFGRTR_EL2 vs HFDFGRTR_EL2 etc when looking up the bit to test.
* FEAT_FGT2 will add more elements to these arrays.
*/
uint64_t fgt_read[2]; /* HFGRTR, HDFGRTR */
uint64_t fgt_write[2]; /* HFGWTR, HDFGWTR */
uint64_t fgt_exec[1]; /* HFGITR */
/* RME registers */
uint64_t gpccr_el3;
uint64_t gptbr_el3;
uint64_t mfar_el3;
/* NV2 register */
uint64_t vncr_el2;
} cp15;
struct {
/* M profile has up to 4 stack pointers:
* a Main Stack Pointer and a Process Stack Pointer for each
* of the Secure and Non-Secure states. (If the CPU doesn't support
* the security extension then it has only two SPs.)
* In QEMU we always store the currently active SP in regs[13],
* and the non-active SP for the current security state in
* v7m.other_sp. The stack pointers for the inactive security state
* are stored in other_ss_msp and other_ss_psp.
* switch_v7m_security_state() is responsible for rearranging them
* when we change security state.
*/
uint32_t other_sp;
uint32_t other_ss_msp;
uint32_t other_ss_psp;
uint32_t vecbase[M_REG_NUM_BANKS];
uint32_t basepri[M_REG_NUM_BANKS];
uint32_t control[M_REG_NUM_BANKS];
uint32_t ccr[M_REG_NUM_BANKS]; /* Configuration and Control */
uint32_t cfsr[M_REG_NUM_BANKS]; /* Configurable Fault Status */
uint32_t hfsr; /* HardFault Status */
uint32_t dfsr; /* Debug Fault Status Register */
uint32_t sfsr; /* Secure Fault Status Register */
uint32_t mmfar[M_REG_NUM_BANKS]; /* MemManage Fault Address */
uint32_t bfar; /* BusFault Address */
uint32_t sfar; /* Secure Fault Address Register */
unsigned mpu_ctrl[M_REG_NUM_BANKS]; /* MPU_CTRL */
int exception;
uint32_t primask[M_REG_NUM_BANKS];
uint32_t faultmask[M_REG_NUM_BANKS];
uint32_t aircr; /* only holds r/w state if security extn implemented */
uint32_t secure; /* Is CPU in Secure state? (not guest visible) */
uint32_t csselr[M_REG_NUM_BANKS];
uint32_t scr[M_REG_NUM_BANKS];
uint32_t msplim[M_REG_NUM_BANKS];
uint32_t psplim[M_REG_NUM_BANKS];
uint32_t fpcar[M_REG_NUM_BANKS];
uint32_t fpccr[M_REG_NUM_BANKS];
uint32_t fpdscr[M_REG_NUM_BANKS];
uint32_t cpacr[M_REG_NUM_BANKS];
uint32_t nsacr;
uint32_t ltpsize;
uint32_t vpr;
} v7m;
/* Information associated with an exception about to be taken:
* code which raises an exception must set cs->exception_index and
* the relevant parts of this structure; the cpu_do_interrupt function
* will then set the guest-visible registers as part of the exception
* entry process.
*/
struct {
uint32_t syndrome; /* AArch64 format syndrome register */
uint32_t fsr; /* AArch32 format fault status register info */
uint64_t vaddress; /* virtual addr associated with exception, if any */
uint32_t target_el; /* EL the exception should be targeted for */
/* If we implement EL2 we will also need to store information
* about the intermediate physical address for stage 2 faults.
*/
} exception;
/* Information associated with an SError */
struct {
uint8_t pending;
uint8_t has_esr;
uint64_t esr;
} serror;
uint8_t ext_dabt_raised; /* Tracking/verifying injection of ext DABT */
/* State of our input IRQ/FIQ/VIRQ/VFIQ lines */
uint32_t irq_line_state;
/* Thumb-2 EE state. */
uint32_t teecr;
uint32_t teehbr;
/* VFP coprocessor state. */
struct {
ARMVectorReg zregs[32];
#ifdef TARGET_AARCH64
/* Store FFR as pregs[16] to make it easier to treat as any other. */
#define FFR_PRED_NUM 16
ARMPredicateReg pregs[17];
/* Scratch space for aa64 sve predicate temporary. */
ARMPredicateReg preg_tmp;
#endif
/* We store these fpcsr fields separately for convenience. */
uint32_t qc[4] QEMU_ALIGNED(16);
int vec_len;
int vec_stride;
uint32_t xregs[16];
/* Scratch space for aa32 neon expansion. */
uint32_t scratch[8];
/* There are a number of distinct float control structures:
*
* fp_status: is the "normal" fp status.
* fp_status_fp16: used for half-precision calculations
* standard_fp_status : the ARM "Standard FPSCR Value"
* standard_fp_status_fp16 : used for half-precision
* calculations with the ARM "Standard FPSCR Value"
*
* Half-precision operations are governed by a separate
* flush-to-zero control bit in FPSCR:FZ16. We pass a separate
* status structure to control this.
*
* The "Standard FPSCR", ie default-NaN, flush-to-zero,
* round-to-nearest and is used by any operations (generally
* Neon) which the architecture defines as controlled by the
* standard FPSCR value rather than the FPSCR.
*
* The "standard FPSCR but for fp16 ops" is needed because
* the "standard FPSCR" tracks the FPSCR.FZ16 bit rather than
* using a fixed value for it.
*
* To avoid having to transfer exception bits around, we simply
* say that the FPSCR cumulative exception flags are the logical
* OR of the flags in the four fp statuses. This relies on the
* only thing which needs to read the exception flags being
* an explicit FPSCR read.
*/
float_status fp_status;
float_status fp_status_f16;
float_status standard_fp_status;
float_status standard_fp_status_f16;
uint64_t zcr_el[4]; /* ZCR_EL[1-3] */
uint64_t smcr_el[4]; /* SMCR_EL[1-3] */
} vfp;
uint64_t exclusive_addr;
uint64_t exclusive_val;
/*
* Contains the 'val' for the second 64-bit register of LDXP, which comes
* from the higher address, not the high part of a complete 128-bit value.
* In some ways it might be more convenient to record the exclusive value
* as the low and high halves of a 128 bit data value, but the current
* semantics of these fields are baked into the migration format.
*/
uint64_t exclusive_high;
/* iwMMXt coprocessor state. */
struct {
uint64_t regs[16];
uint64_t val;
uint32_t cregs[16];
} iwmmxt;
#ifdef TARGET_AARCH64
struct {
ARMPACKey apia;
ARMPACKey apib;
ARMPACKey apda;
ARMPACKey apdb;
ARMPACKey apga;
} keys;
uint64_t scxtnum_el[4];
/*
* SME ZA storage -- 256 x 256 byte array, with bytes in host word order,
* as we do with vfp.zregs[]. This corresponds to the architectural ZA
* array, where ZA[N] is in the least-significant bytes of env->zarray[N].
* When SVL is less than the architectural maximum, the accessible
* storage is restricted, such that if the SVL is X bytes the guest can
* see only the bottom X elements of zarray[], and only the least
* significant X bytes of each element of the array. (In other words,
* the observable part is always square.)
*
* The ZA storage can also be considered as a set of square tiles of
* elements of different sizes. The mapping from tiles to the ZA array
* is architecturally defined, such that for tiles of elements of esz
* bytes, the Nth row (or "horizontal slice") of tile T is in
* ZA[T + N * esz]. Note that this means that each tile is not contiguous
* in the ZA storage, because its rows are striped through the ZA array.
*
* Because this is so large, keep this toward the end of the reset area,
* to keep the offsets into the rest of the structure smaller.
*/
ARMVectorReg zarray[ARM_MAX_VQ * 16];
#endif
struct CPUBreakpoint *cpu_breakpoint[16];
struct CPUWatchpoint *cpu_watchpoint[16];
/* Optional fault info across tlb lookup. */
ARMMMUFaultInfo *tlb_fi;
/* Fields up to this point are cleared by a CPU reset */
struct {} end_reset_fields;
/* Fields after this point are preserved across CPU reset. */
/* Internal CPU feature flags. */
uint64_t features;
/* PMSAv7 MPU */
struct {
uint32_t *drbar;
uint32_t *drsr;
uint32_t *dracr;
uint32_t rnr[M_REG_NUM_BANKS];
} pmsav7;
/* PMSAv8 MPU */
struct {
/* The PMSAv8 implementation also shares some PMSAv7 config
* and state:
* pmsav7.rnr (region number register)
* pmsav7_dregion (number of configured regions)
*/
uint32_t *rbar[M_REG_NUM_BANKS];
uint32_t *rlar[M_REG_NUM_BANKS];
uint32_t *hprbar;
uint32_t *hprlar;
uint32_t mair0[M_REG_NUM_BANKS];
uint32_t mair1[M_REG_NUM_BANKS];
uint32_t hprselr;
} pmsav8;
/* v8M SAU */
struct {
uint32_t *rbar;
uint32_t *rlar;
uint32_t rnr;
uint32_t ctrl;
} sau;
#if !defined(CONFIG_USER_ONLY)
NVICState *nvic;
const struct arm_boot_info *boot_info;
/* Store GICv3CPUState to access from this struct */
void *gicv3state;
#else /* CONFIG_USER_ONLY */
/* For usermode syscall translation. */
bool eabi;
#endif /* CONFIG_USER_ONLY */
#ifdef TARGET_TAGGED_ADDRESSES
/* Linux syscall tagged address support */
bool tagged_addr_enable;
#endif
} CPUARMState;
static inline void set_feature(CPUARMState *env, int feature)
{
env->features |= 1ULL << feature;
}
static inline void unset_feature(CPUARMState *env, int feature)
{
env->features &= ~(1ULL << feature);
}
/**
* ARMELChangeHookFn:
* type of a function which can be registered via arm_register_el_change_hook()
* to get callbacks when the CPU changes its exception level or mode.
*/
typedef void ARMELChangeHookFn(ARMCPU *cpu, void *opaque);
typedef struct ARMELChangeHook ARMELChangeHook;
struct ARMELChangeHook {
ARMELChangeHookFn *hook;
void *opaque;
QLIST_ENTRY(ARMELChangeHook) node;
};
/* These values map onto the return values for
* QEMU_PSCI_0_2_FN_AFFINITY_INFO */
typedef enum ARMPSCIState {
PSCI_ON = 0,
PSCI_OFF = 1,
PSCI_ON_PENDING = 2
} ARMPSCIState;
typedef struct ARMISARegisters ARMISARegisters;
/*
* In map, each set bit is a supported vector length of (bit-number + 1) * 16
* bytes, i.e. each bit number + 1 is the vector length in quadwords.
*
* While processing properties during initialization, corresponding init bits
* are set for bits in sve_vq_map that have been set by properties.
*
* Bits set in supported represent valid vector lengths for the CPU type.
*/
typedef struct {
uint32_t map, init, supported;
} ARMVQMap;
/**
* ARMCPU:
* @env: #CPUARMState
*
* An ARM CPU core.
*/
struct ArchCPU {
CPUState parent_obj;
CPUARMState env;
/* Coprocessor information */
GHashTable *cp_regs;
/* For marshalling (mostly coprocessor) register state between the
* kernel and QEMU (for KVM) and between two QEMUs (for migration),
* we use these arrays.
*/
/* List of register indexes managed via these arrays; (full KVM style
* 64 bit indexes, not CPRegInfo 32 bit indexes)
*/
uint64_t *cpreg_indexes;
/* Values of the registers (cpreg_indexes[i]'s value is cpreg_values[i]) */
uint64_t *cpreg_values;
/* Length of the indexes, values, reset_values arrays */
int32_t cpreg_array_len;
/* These are used only for migration: incoming data arrives in
* these fields and is sanity checked in post_load before copying
* to the working data structures above.
*/
uint64_t *cpreg_vmstate_indexes;
uint64_t *cpreg_vmstate_values;
int32_t cpreg_vmstate_array_len;
DynamicGDBFeatureInfo dyn_sysreg_feature;
DynamicGDBFeatureInfo dyn_svereg_feature;
DynamicGDBFeatureInfo dyn_m_systemreg_feature;
DynamicGDBFeatureInfo dyn_m_secextreg_feature;
/* Timers used by the generic (architected) timer */
QEMUTimer *gt_timer[NUM_GTIMERS];
/*
* Timer used by the PMU. Its state is restored after migration by
* pmu_op_finish() - it does not need other handling during migration
*/
QEMUTimer *pmu_timer;
/* Timer used for WFxT timeouts */
QEMUTimer *wfxt_timer;
/* GPIO outputs for generic timer */
qemu_irq gt_timer_outputs[NUM_GTIMERS];
/* GPIO output for GICv3 maintenance interrupt signal */
qemu_irq gicv3_maintenance_interrupt;
/* GPIO output for the PMU interrupt */
qemu_irq pmu_interrupt;
/* MemoryRegion to use for secure physical accesses */
MemoryRegion *secure_memory;
/* MemoryRegion to use for allocation tag accesses */
MemoryRegion *tag_memory;
MemoryRegion *secure_tag_memory;
/* For v8M, pointer to the IDAU interface provided by board/SoC */
Object *idau;
/* 'compatible' string for this CPU for Linux device trees */
const char *dtb_compatible;
/* PSCI version for this CPU
* Bits[31:16] = Major Version
* Bits[15:0] = Minor Version
*/
uint32_t psci_version;
/* Current power state, access guarded by BQL */
ARMPSCIState power_state;
/* CPU has virtualization extension */
bool has_el2;
/* CPU has security extension */
bool has_el3;
/* CPU has PMU (Performance Monitor Unit) */
bool has_pmu;
/* CPU has VFP */
bool has_vfp;
/* CPU has 32 VFP registers */
bool has_vfp_d32;
/* CPU has Neon */
bool has_neon;
/* CPU has M-profile DSP extension */
bool has_dsp;
/* CPU has memory protection unit */
bool has_mpu;
/* PMSAv7 MPU number of supported regions */
uint32_t pmsav7_dregion;
/* PMSAv8 MPU number of supported hyp regions */
uint32_t pmsav8r_hdregion;
/* v8M SAU number of supported regions */
uint32_t sau_sregion;
/* PSCI conduit used to invoke PSCI methods
* 0 - disabled, 1 - smc, 2 - hvc
*/
uint32_t psci_conduit;
/* For v8M, initial value of the Secure VTOR */
uint32_t init_svtor;
/* For v8M, initial value of the Non-secure VTOR */
uint32_t init_nsvtor;
/* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or
* QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type.
*/
uint32_t kvm_target;
#ifdef CONFIG_KVM
/* KVM init features for this CPU */
uint32_t kvm_init_features[7];
/* KVM CPU state */
/* KVM virtual time adjustment */
bool kvm_adjvtime;
bool kvm_vtime_dirty;
uint64_t kvm_vtime;
/* KVM steal time */
OnOffAuto kvm_steal_time;
#endif /* CONFIG_KVM */
/* Uniprocessor system with MP extensions */
bool mp_is_up;
/* True if we tried kvm_arm_host_cpu_features() during CPU instance_init
* and the probe failed (so we need to report the error in realize)
*/
bool host_cpu_probe_failed;
/* QOM property to indicate we should use the back-compat CNTFRQ default */
bool backcompat_cntfrq;
/* Specify the number of cores in this CPU cluster. Used for the L2CTLR
* register.
*/
int32_t core_count;
/* The instance init functions for implementation-specific subclasses
* set these fields to specify the implementation-dependent values of
* various constant registers and reset values of non-constant
* registers.
* Some of these might become QOM properties eventually.
* Field names match the official register names as defined in the
* ARMv7AR ARM Architecture Reference Manual. A reset_ prefix
* is used for reset values of non-constant registers; no reset_
* prefix means a constant register.
* Some of these registers are split out into a substructure that
* is shared with the translators to control the ISA.
*
* Note that if you add an ID register to the ARMISARegisters struct
* you need to also update the 32-bit and 64-bit versions of the
* kvm_arm_get_host_cpu_features() function to correctly populate the
* field by reading the value from the KVM vCPU.
*/
struct ARMISARegisters {
uint32_t id_isar0;
uint32_t id_isar1;
uint32_t id_isar2;
uint32_t id_isar3;
uint32_t id_isar4;
uint32_t id_isar5;
uint32_t id_isar6;
uint32_t id_mmfr0;
uint32_t id_mmfr1;
uint32_t id_mmfr2;
uint32_t id_mmfr3;
uint32_t id_mmfr4;
uint32_t id_mmfr5;
uint32_t id_pfr0;
uint32_t id_pfr1;
uint32_t id_pfr2;
uint32_t mvfr0;
uint32_t mvfr1;
uint32_t mvfr2;
uint32_t id_dfr0;
uint32_t id_dfr1;
uint32_t dbgdidr;
uint32_t dbgdevid;
uint32_t dbgdevid1;
uint64_t id_aa64isar0;
uint64_t id_aa64isar1;
uint64_t id_aa64isar2;
uint64_t id_aa64pfr0;
uint64_t id_aa64pfr1;
uint64_t id_aa64mmfr0;
uint64_t id_aa64mmfr1;
uint64_t id_aa64mmfr2;
uint64_t id_aa64mmfr3;
uint64_t id_aa64dfr0;
uint64_t id_aa64dfr1;
uint64_t id_aa64zfr0;
uint64_t id_aa64smfr0;
uint64_t reset_pmcr_el0;
} isar;
uint64_t midr;
uint32_t revidr;
uint32_t reset_fpsid;
uint64_t ctr;
uint32_t reset_sctlr;
uint64_t pmceid0;
uint64_t pmceid1;
uint32_t id_afr0;
uint64_t id_aa64afr0;
uint64_t id_aa64afr1;
uint64_t clidr;
uint64_t mp_affinity; /* MP ID without feature bits */
/* The elements of this array are the CCSIDR values for each cache,
* in the order L1DCache, L1ICache, L2DCache, L2ICache, etc.
*/
uint64_t ccsidr[16];
uint64_t reset_cbar;
uint32_t reset_auxcr;
bool reset_hivecs;
uint8_t reset_l0gptsz;
/*
* Intermediate values used during property parsing.
* Once finalized, the values should be read from ID_AA64*.
*/
bool prop_pauth;
bool prop_pauth_impdef;
bool prop_pauth_qarma3;
bool prop_lpa2;
/* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */
uint8_t dcz_blocksize;
/* GM blocksize, in log_2(words), ie low 4 bits of GMID_EL0 */
uint8_t gm_blocksize;
uint64_t rvbar_prop; /* Property/input signals. */
/* Configurable aspects of GIC cpu interface (which is part of the CPU) */
int gic_num_lrs; /* number of list registers */
int gic_vpribits; /* number of virtual priority bits */
int gic_vprebits; /* number of virtual preemption bits */
int gic_pribits; /* number of physical priority bits */
/* Whether the cfgend input is high (i.e. this CPU should reset into
* big-endian mode). This setting isn't used directly: instead it modifies
* the reset_sctlr value to have SCTLR_B or SCTLR_EE set, depending on the
* architecture version.
*/
bool cfgend;
QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks;
QLIST_HEAD(, ARMELChangeHook) el_change_hooks;
int32_t node_id; /* NUMA node this CPU belongs to */
/* Used to synchronize KVM and QEMU in-kernel device levels */
uint8_t device_irq_level;
/* Used to set the maximum vector length the cpu will support. */
uint32_t sve_max_vq;
#ifdef CONFIG_USER_ONLY
/* Used to set the default vector length at process start. */
uint32_t sve_default_vq;
uint32_t sme_default_vq;
#endif
ARMVQMap sve_vq;
ARMVQMap sme_vq;
/* Generic timer counter frequency, in Hz */
uint64_t gt_cntfrq_hz;
};
typedef struct ARMCPUInfo {
const char *name;
void (*initfn)(Object *obj);
void (*class_init)(ObjectClass *oc, void *data);
} ARMCPUInfo;
/**
* ARMCPUClass:
* @parent_realize: The parent class' realize handler.
* @parent_phases: The parent class' reset phase handlers.
*
* An ARM CPU model.
*/
struct ARMCPUClass {
CPUClass parent_class;
const ARMCPUInfo *info;
DeviceRealize parent_realize;
ResettablePhases parent_phases;
};
struct AArch64CPUClass {
ARMCPUClass parent_class;
};
/* Callback functions for the generic timer's timers. */
void arm_gt_ptimer_cb(void *opaque);
void arm_gt_vtimer_cb(void *opaque);
void arm_gt_htimer_cb(void *opaque);
void arm_gt_stimer_cb(void *opaque);
void arm_gt_hvtimer_cb(void *opaque);
unsigned int gt_cntfrq_period_ns(ARMCPU *cpu);
void gt_rme_post_el_change(ARMCPU *cpu, void *opaque);
void arm_cpu_post_init(Object *obj);
#define ARM_AFF0_SHIFT 0
#define ARM_AFF0_MASK (0xFFULL << ARM_AFF0_SHIFT)
#define ARM_AFF1_SHIFT 8
#define ARM_AFF1_MASK (0xFFULL << ARM_AFF1_SHIFT)
#define ARM_AFF2_SHIFT 16
#define ARM_AFF2_MASK (0xFFULL << ARM_AFF2_SHIFT)
#define ARM_AFF3_SHIFT 32
#define ARM_AFF3_MASK (0xFFULL << ARM_AFF3_SHIFT)
#define ARM_DEFAULT_CPUS_PER_CLUSTER 8
#define ARM32_AFFINITY_MASK (ARM_AFF0_MASK | ARM_AFF1_MASK | ARM_AFF2_MASK)
#define ARM64_AFFINITY_MASK \
(ARM_AFF0_MASK | ARM_AFF1_MASK | ARM_AFF2_MASK | ARM_AFF3_MASK)
#define ARM64_AFFINITY_INVALID (~ARM64_AFFINITY_MASK)
uint64_t arm_build_mp_affinity(int idx, uint8_t clustersz);
#ifndef CONFIG_USER_ONLY
extern const VMStateDescription vmstate_arm_cpu;
void arm_cpu_do_interrupt(CPUState *cpu);
void arm_v7m_cpu_do_interrupt(CPUState *cpu);
hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cpu, vaddr addr,
MemTxAttrs *attrs);
#endif /* !CONFIG_USER_ONLY */
int arm_cpu_gdb_read_register(CPUState *cpu, GByteArray *buf, int reg);
int arm_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
int arm_cpu_write_elf64_note(WriteCoreDumpFunction f, CPUState *cs,
int cpuid, DumpState *s);
int arm_cpu_write_elf32_note(WriteCoreDumpFunction f, CPUState *cs,
int cpuid, DumpState *s);
/**
* arm_emulate_firmware_reset: Emulate firmware CPU reset handling
* @cpu: CPU (which must have been freshly reset)
* @target_el: exception level to put the CPU into
* @secure: whether to put the CPU in secure state
*
* When QEMU is directly running a guest kernel at a lower level than
* EL3 it implicitly emulates some aspects of the guest firmware.
* This includes that on reset we need to configure the parts of the
* CPU corresponding to EL3 so that the real guest code can run at its
* lower exception level. This function does that post-reset CPU setup,
* for when we do direct boot of a guest kernel, and for when we
* emulate PSCI and similar firmware interfaces starting a CPU at a
* lower exception level.
*
* @target_el must be an EL implemented by the CPU between 1 and 3.
* We do not support dropping into a Secure EL other than 3.
*
* It is the responsibility of the caller to call arm_rebuild_hflags().
*/
void arm_emulate_firmware_reset(CPUState *cpustate, int target_el);
#ifdef TARGET_AARCH64
int aarch64_cpu_gdb_read_register(CPUState *cpu, GByteArray *buf, int reg);
int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq);
void aarch64_sve_change_el(CPUARMState *env, int old_el,
int new_el, bool el0_a64);
void aarch64_set_svcr(CPUARMState *env, uint64_t new, uint64_t mask);
/*
* SVE registers are encoded in KVM's memory in an endianness-invariant format.
* The byte at offset i from the start of the in-memory representation contains
* the bits [(7 + 8 * i) : (8 * i)] of the register value. As this means the
* lowest offsets are stored in the lowest memory addresses, then that nearly
* matches QEMU's representation, which is to use an array of host-endian
* uint64_t's, where the lower offsets are at the lower indices. To complete
* the translation we just need to byte swap the uint64_t's on big-endian hosts.
*/
static inline uint64_t *sve_bswap64(uint64_t *dst, uint64_t *src, int nr)
{
#if HOST_BIG_ENDIAN
int i;
for (i = 0; i < nr; ++i) {
dst[i] = bswap64(src[i]);
}
return dst;
#else
return src;
#endif
}
#else
static inline void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq) { }
static inline void aarch64_sve_change_el(CPUARMState *env, int o,
int n, bool a)
{ }
#endif
void aarch64_sync_32_to_64(CPUARMState *env);
void aarch64_sync_64_to_32(CPUARMState *env);
int fp_exception_el(CPUARMState *env, int cur_el);
int sve_exception_el(CPUARMState *env, int cur_el);
int sme_exception_el(CPUARMState *env, int cur_el);
/**
* sve_vqm1_for_el_sm:
* @env: CPUARMState
* @el: exception level
* @sm: streaming mode
*
* Compute the current vector length for @el & @sm, in units of
* Quadwords Minus 1 -- the same scale used for ZCR_ELx.LEN.
* If @sm, compute for SVL, otherwise NVL.
*/
uint32_t sve_vqm1_for_el_sm(CPUARMState *env, int el, bool sm);
/* Likewise, but using @sm = PSTATE.SM. */
uint32_t sve_vqm1_for_el(CPUARMState *env, int el);
static inline bool is_a64(CPUARMState *env)
{
return env->aarch64;
}
/**
* pmu_op_start/finish
* @env: CPUARMState
*
* Convert all PMU counters between their delta form (the typical mode when
* they are enabled) and the guest-visible values. These two calls must
* surround any action which might affect the counters.
*/
void pmu_op_start(CPUARMState *env);
void pmu_op_finish(CPUARMState *env);
/*
* Called when a PMU counter is due to overflow
*/
void arm_pmu_timer_cb(void *opaque);
/**
* Functions to register as EL change hooks for PMU mode filtering
*/
void pmu_pre_el_change(ARMCPU *cpu, void *ignored);
void pmu_post_el_change(ARMCPU *cpu, void *ignored);
/*
* pmu_init
* @cpu: ARMCPU
*
* Initialize the CPU's PMCEID[01]_EL0 registers and associated internal state
* for the current configuration
*/
void pmu_init(ARMCPU *cpu);
/* SCTLR bit meanings. Several bits have been reused in newer
* versions of the architecture; in that case we define constants
* for both old and new bit meanings. Code which tests against those
* bits should probably check or otherwise arrange that the CPU
* is the architectural version it expects.
*/
#define SCTLR_M (1U << 0)
#define SCTLR_A (1U << 1)
#define SCTLR_C (1U << 2)
#define SCTLR_W (1U << 3) /* up to v6; RAO in v7 */
#define SCTLR_nTLSMD_32 (1U << 3) /* v8.2-LSMAOC, AArch32 only */
#define SCTLR_SA (1U << 3) /* AArch64 only */
#define SCTLR_P (1U << 4) /* up to v5; RAO in v6 and v7 */
#define SCTLR_LSMAOE_32 (1U << 4) /* v8.2-LSMAOC, AArch32 only */
#define SCTLR_SA0 (1U << 4) /* v8 onward, AArch64 only */
#define SCTLR_D (1U << 5) /* up to v5; RAO in v6 */
#define SCTLR_CP15BEN (1U << 5) /* v7 onward */
#define SCTLR_L (1U << 6) /* up to v5; RAO in v6 and v7; RAZ in v8 */
#define SCTLR_nAA (1U << 6) /* when FEAT_LSE2 is implemented */
#define SCTLR_B (1U << 7) /* up to v6; RAZ in v7 */
#define SCTLR_ITD (1U << 7) /* v8 onward */
#define SCTLR_S (1U << 8) /* up to v6; RAZ in v7 */
#define SCTLR_SED (1U << 8) /* v8 onward */
#define SCTLR_R (1U << 9) /* up to v6; RAZ in v7 */
#define SCTLR_UMA (1U << 9) /* v8 onward, AArch64 only */
#define SCTLR_F (1U << 10) /* up to v6 */
#define SCTLR_SW (1U << 10) /* v7 */
#define SCTLR_EnRCTX (1U << 10) /* in v8.0-PredInv */
#define SCTLR_Z (1U << 11) /* in v7, RES1 in v8 */
#define SCTLR_EOS (1U << 11) /* v8.5-ExS */
#define SCTLR_I (1U << 12)
#define SCTLR_V (1U << 13) /* AArch32 only */
#define SCTLR_EnDB (1U << 13) /* v8.3, AArch64 only */
#define SCTLR_RR (1U << 14) /* up to v7 */
#define SCTLR_DZE (1U << 14) /* v8 onward, AArch64 only */
#define SCTLR_L4 (1U << 15) /* up to v6; RAZ in v7 */
#define SCTLR_UCT (1U << 15) /* v8 onward, AArch64 only */
#define SCTLR_DT (1U << 16) /* up to ??, RAO in v6 and v7 */
#define SCTLR_nTWI (1U << 16) /* v8 onward */
#define SCTLR_HA (1U << 17) /* up to v7, RES0 in v8 */
#define SCTLR_BR (1U << 17) /* PMSA only */
#define SCTLR_IT (1U << 18) /* up to ??, RAO in v6 and v7 */
#define SCTLR_nTWE (1U << 18) /* v8 onward */
#define SCTLR_WXN (1U << 19)
#define SCTLR_ST (1U << 20) /* up to ??, RAZ in v6 */
#define SCTLR_UWXN (1U << 20) /* v7 onward, AArch32 only */
#define SCTLR_TSCXT (1U << 20) /* FEAT_CSV2_1p2, AArch64 only */
#define SCTLR_FI (1U << 21) /* up to v7, v8 RES0 */
#define SCTLR_IESB (1U << 21) /* v8.2-IESB, AArch64 only */
#define SCTLR_U (1U << 22) /* up to v6, RAO in v7 */
#define SCTLR_EIS (1U << 22) /* v8.5-ExS */
#define SCTLR_XP (1U << 23) /* up to v6; v7 onward RAO */
#define SCTLR_SPAN (1U << 23) /* v8.1-PAN */
#define SCTLR_VE (1U << 24) /* up to v7 */
#define SCTLR_E0E (1U << 24) /* v8 onward, AArch64 only */
#define SCTLR_EE (1U << 25)
#define SCTLR_L2 (1U << 26) /* up to v6, RAZ in v7 */
#define SCTLR_UCI (1U << 26) /* v8 onward, AArch64 only */
#define SCTLR_NMFI (1U << 27) /* up to v7, RAZ in v7VE and v8 */
#define SCTLR_EnDA (1U << 27) /* v8.3, AArch64 only */
#define SCTLR_TRE (1U << 28) /* AArch32 only */
#define SCTLR_nTLSMD_64 (1U << 28) /* v8.2-LSMAOC, AArch64 only */
#define SCTLR_AFE (1U << 29) /* AArch32 only */
#define SCTLR_LSMAOE_64 (1U << 29) /* v8.2-LSMAOC, AArch64 only */
#define SCTLR_TE (1U << 30) /* AArch32 only */
#define SCTLR_EnIB (1U << 30) /* v8.3, AArch64 only */
#define SCTLR_EnIA (1U << 31) /* v8.3, AArch64 only */
#define SCTLR_DSSBS_32 (1U << 31) /* v8.5, AArch32 only */
#define SCTLR_MSCEN (1ULL << 33) /* FEAT_MOPS */
#define SCTLR_BT0 (1ULL << 35) /* v8.5-BTI */
#define SCTLR_BT1 (1ULL << 36) /* v8.5-BTI */
#define SCTLR_ITFSB (1ULL << 37) /* v8.5-MemTag */
#define SCTLR_TCF0 (3ULL << 38) /* v8.5-MemTag */
#define SCTLR_TCF (3ULL << 40) /* v8.5-MemTag */
#define SCTLR_ATA0 (1ULL << 42) /* v8.5-MemTag */
#define SCTLR_ATA (1ULL << 43) /* v8.5-MemTag */
#define SCTLR_DSSBS_64 (1ULL << 44) /* v8.5, AArch64 only */
#define SCTLR_TWEDEn (1ULL << 45) /* FEAT_TWED */
#define SCTLR_TWEDEL MAKE_64_MASK(46, 4) /* FEAT_TWED */
#define SCTLR_TMT0 (1ULL << 50) /* FEAT_TME */
#define SCTLR_TMT (1ULL << 51) /* FEAT_TME */
#define SCTLR_TME0 (1ULL << 52) /* FEAT_TME */
#define SCTLR_TME (1ULL << 53) /* FEAT_TME */
#define SCTLR_EnASR (1ULL << 54) /* FEAT_LS64_V */
#define SCTLR_EnAS0 (1ULL << 55) /* FEAT_LS64_ACCDATA */
#define SCTLR_EnALS (1ULL << 56) /* FEAT_LS64 */
#define SCTLR_EPAN (1ULL << 57) /* FEAT_PAN3 */
#define SCTLR_EnTP2 (1ULL << 60) /* FEAT_SME */
#define SCTLR_NMI (1ULL << 61) /* FEAT_NMI */
#define SCTLR_SPINTMASK (1ULL << 62) /* FEAT_NMI */
#define SCTLR_TIDCP (1ULL << 63) /* FEAT_TIDCP1 */
#define CPSR_M (0x1fU)
#define CPSR_T (1U << 5)
#define CPSR_F (1U << 6)
#define CPSR_I (1U << 7)
#define CPSR_A (1U << 8)
#define CPSR_E (1U << 9)
#define CPSR_IT_2_7 (0xfc00U)
#define CPSR_GE (0xfU << 16)
#define CPSR_IL (1U << 20)
#define CPSR_DIT (1U << 21)
#define CPSR_PAN (1U << 22)
#define CPSR_SSBS (1U << 23)
#define CPSR_J (1U << 24)
#define CPSR_IT_0_1 (3U << 25)
#define CPSR_Q (1U << 27)
#define CPSR_V (1U << 28)
#define CPSR_C (1U << 29)
#define CPSR_Z (1U << 30)
#define CPSR_N (1U << 31)
#define CPSR_NZCV (CPSR_N | CPSR_Z | CPSR_C | CPSR_V)
#define CPSR_AIF (CPSR_A | CPSR_I | CPSR_F)
#define ISR_FS (1U << 9)
#define ISR_IS (1U << 10)
#define CPSR_IT (CPSR_IT_0_1 | CPSR_IT_2_7)
#define CACHED_CPSR_BITS (CPSR_T | CPSR_AIF | CPSR_GE | CPSR_IT | CPSR_Q \
| CPSR_NZCV)
/* Bits writable in user mode. */
#define CPSR_USER (CPSR_NZCV | CPSR_Q | CPSR_GE | CPSR_E)
/* Execution state bits. MRS read as zero, MSR writes ignored. */
#define CPSR_EXEC (CPSR_T | CPSR_IT | CPSR_J | CPSR_IL)
/* Bit definitions for M profile XPSR. Most are the same as CPSR. */
#define XPSR_EXCP 0x1ffU
#define XPSR_SPREALIGN (1U << 9) /* Only set in exception stack frames */
#define XPSR_IT_2_7 CPSR_IT_2_7
#define XPSR_GE CPSR_GE
#define XPSR_SFPA (1U << 20) /* Only set in exception stack frames */
#define XPSR_T (1U << 24) /* Not the same as CPSR_T ! */
#define XPSR_IT_0_1 CPSR_IT_0_1
#define XPSR_Q CPSR_Q
#define XPSR_V CPSR_V
#define XPSR_C CPSR_C
#define XPSR_Z CPSR_Z
#define XPSR_N CPSR_N
#define XPSR_NZCV CPSR_NZCV
#define XPSR_IT CPSR_IT
/* Bit definitions for ARMv8 SPSR (PSTATE) format.
* Only these are valid when in AArch64 mode; in
* AArch32 mode SPSRs are basically CPSR-format.
*/
#define PSTATE_SP (1U)
#define PSTATE_M (0xFU)
#define PSTATE_nRW (1U << 4)
#define PSTATE_F (1U << 6)
#define PSTATE_I (1U << 7)
#define PSTATE_A (1U << 8)
#define PSTATE_D (1U << 9)
#define PSTATE_BTYPE (3U << 10)
#define PSTATE_SSBS (1U << 12)
#define PSTATE_ALLINT (1U << 13)
#define PSTATE_IL (1U << 20)
#define PSTATE_SS (1U << 21)
#define PSTATE_PAN (1U << 22)
#define PSTATE_UAO (1U << 23)
#define PSTATE_DIT (1U << 24)
#define PSTATE_TCO (1U << 25)
#define PSTATE_V (1U << 28)
#define PSTATE_C (1U << 29)
#define PSTATE_Z (1U << 30)
#define PSTATE_N (1U << 31)
#define PSTATE_NZCV (PSTATE_N | PSTATE_Z | PSTATE_C | PSTATE_V)
#define PSTATE_DAIF (PSTATE_D | PSTATE_A | PSTATE_I | PSTATE_F)
#define CACHED_PSTATE_BITS (PSTATE_NZCV | PSTATE_DAIF | PSTATE_BTYPE)
/* Mode values for AArch64 */
#define PSTATE_MODE_EL3h 13
#define PSTATE_MODE_EL3t 12
#define PSTATE_MODE_EL2h 9
#define PSTATE_MODE_EL2t 8
#define PSTATE_MODE_EL1h 5
#define PSTATE_MODE_EL1t 4
#define PSTATE_MODE_EL0t 0
/* PSTATE bits that are accessed via SVCR and not stored in SPSR_ELx. */
FIELD(SVCR, SM, 0, 1)
FIELD(SVCR, ZA, 1, 1)
/* Fields for SMCR_ELx. */
FIELD(SMCR, LEN, 0, 4)
FIELD(SMCR, FA64, 31, 1)
/* Write a new value to v7m.exception, thus transitioning into or out
* of Handler mode; this may result in a change of active stack pointer.
*/
void write_v7m_exception(CPUARMState *env, uint32_t new_exc);
/* Map EL and handler into a PSTATE_MODE. */
static inline unsigned int aarch64_pstate_mode(unsigned int el, bool handler)
{
return (el << 2) | handler;
}
/* Return the current PSTATE value. For the moment we don't support 32<->64 bit
* interprocessing, so we don't attempt to sync with the cpsr state used by
* the 32 bit decoder.
*/
static inline uint32_t pstate_read(CPUARMState *env)
{
int ZF;
ZF = (env->ZF == 0);
return (env->NF & 0x80000000) | (ZF << 30)
| (env->CF << 29) | ((env->VF & 0x80000000) >> 3)
| env->pstate | env->daif | (env->btype << 10);
}
static inline void pstate_write(CPUARMState *env, uint32_t val)
{
env->ZF = (~val) & PSTATE_Z;
env->NF = val;
env->CF = (val >> 29) & 1;
env->VF = (val << 3) & 0x80000000;
env->daif = val & PSTATE_DAIF;
env->btype = (val >> 10) & 3;
env->pstate = val & ~CACHED_PSTATE_BITS;
}
/* Return the current CPSR value. */
uint32_t cpsr_read(CPUARMState *env);
typedef enum CPSRWriteType {
CPSRWriteByInstr = 0, /* from guest MSR or CPS */
CPSRWriteExceptionReturn = 1, /* from guest exception return insn */
CPSRWriteRaw = 2,
/* trust values, no reg bank switch, no hflags rebuild */
CPSRWriteByGDBStub = 3, /* from the GDB stub */
} CPSRWriteType;
/*
* Set the CPSR. Note that some bits of mask must be all-set or all-clear.
* This will do an arm_rebuild_hflags() if any of the bits in @mask
* correspond to TB flags bits cached in the hflags, unless @write_type
* is CPSRWriteRaw.
*/
void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
CPSRWriteType write_type);
/* Return the current xPSR value. */
static inline uint32_t xpsr_read(CPUARMState *env)
{
int ZF;
ZF = (env->ZF == 0);
return (env->NF & 0x80000000) | (ZF << 30)
| (env->CF << 29) | ((env->VF & 0x80000000) >> 3) | (env->QF << 27)
| (env->thumb << 24) | ((env->condexec_bits & 3) << 25)
| ((env->condexec_bits & 0xfc) << 8)
| (env->GE << 16)
| env->v7m.exception;
}
/* Set the xPSR. Note that some bits of mask must be all-set or all-clear. */
static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask)
{
if (mask & XPSR_NZCV) {
env->ZF = (~val) & XPSR_Z;
env->NF = val;
env->CF = (val >> 29) & 1;
env->VF = (val << 3) & 0x80000000;
}
if (mask & XPSR_Q) {
env->QF = ((val & XPSR_Q) != 0);
}
if (mask & XPSR_GE) {
env->GE = (val & XPSR_GE) >> 16;
}
#ifndef CONFIG_USER_ONLY
if (mask & XPSR_T) {
env->thumb = ((val & XPSR_T) != 0);
}
if (mask & XPSR_IT_0_1) {
env->condexec_bits &= ~3;
env->condexec_bits |= (val >> 25) & 3;
}
if (mask & XPSR_IT_2_7) {
env->condexec_bits &= 3;
env->condexec_bits |= (val >> 8) & 0xfc;
}
if (mask & XPSR_EXCP) {
/* Note that this only happens on exception exit */
write_v7m_exception(env, val & XPSR_EXCP);
}
#endif
}
#define HCR_VM (1ULL << 0)
#define HCR_SWIO (1ULL << 1)
#define HCR_PTW (1ULL << 2)
#define HCR_FMO (1ULL << 3)
#define HCR_IMO (1ULL << 4)
#define HCR_AMO (1ULL << 5)
#define HCR_VF (1ULL << 6)
#define HCR_VI (1ULL << 7)
#define HCR_VSE (1ULL << 8)
#define HCR_FB (1ULL << 9)
#define HCR_BSU_MASK (3ULL << 10)
#define HCR_DC (1ULL << 12)
#define HCR_TWI (1ULL << 13)
#define HCR_TWE (1ULL << 14)
#define HCR_TID0 (1ULL << 15)
#define HCR_TID1 (1ULL << 16)
#define HCR_TID2 (1ULL << 17)
#define HCR_TID3 (1ULL << 18)
#define HCR_TSC (1ULL << 19)
#define HCR_TIDCP (1ULL << 20)
#define HCR_TACR (1ULL << 21)
#define HCR_TSW (1ULL << 22)
#define HCR_TPCP (1ULL << 23)
#define HCR_TPU (1ULL << 24)
#define HCR_TTLB (1ULL << 25)
#define HCR_TVM (1ULL << 26)
#define HCR_TGE (1ULL << 27)
#define HCR_TDZ (1ULL << 28)
#define HCR_HCD (1ULL << 29)
#define HCR_TRVM (1ULL << 30)
#define HCR_RW (1ULL << 31)
#define HCR_CD (1ULL << 32)
#define HCR_ID (1ULL << 33)
#define HCR_E2H (1ULL << 34)
#define HCR_TLOR (1ULL << 35)
#define HCR_TERR (1ULL << 36)
#define HCR_TEA (1ULL << 37)
#define HCR_MIOCNCE (1ULL << 38)
#define HCR_TME (1ULL << 39)
#define HCR_APK (1ULL << 40)
#define HCR_API (1ULL << 41)
#define HCR_NV (1ULL << 42)
#define HCR_NV1 (1ULL << 43)
#define HCR_AT (1ULL << 44)
#define HCR_NV2 (1ULL << 45)
#define HCR_FWB (1ULL << 46)
#define HCR_FIEN (1ULL << 47)
#define HCR_GPF (1ULL << 48)
#define HCR_TID4 (1ULL << 49)
#define HCR_TICAB (1ULL << 50)
#define HCR_AMVOFFEN (1ULL << 51)
#define HCR_TOCU (1ULL << 52)
#define HCR_ENSCXT (1ULL << 53)
#define HCR_TTLBIS (1ULL << 54)
#define HCR_TTLBOS (1ULL << 55)
#define HCR_ATA (1ULL << 56)
#define HCR_DCT (1ULL << 57)
#define HCR_TID5 (1ULL << 58)
#define HCR_TWEDEN (1ULL << 59)
#define HCR_TWEDEL MAKE_64BIT_MASK(60, 4)
#define SCR_NS (1ULL << 0)
#define SCR_IRQ (1ULL << 1)
#define SCR_FIQ (1ULL << 2)
#define SCR_EA (1ULL << 3)
#define SCR_FW (1ULL << 4)
#define SCR_AW (1ULL << 5)
#define SCR_NET (1ULL << 6)
#define SCR_SMD (1ULL << 7)
#define SCR_HCE (1ULL << 8)
#define SCR_SIF (1ULL << 9)
#define SCR_RW (1ULL << 10)
#define SCR_ST (1ULL << 11)
#define SCR_TWI (1ULL << 12)
#define SCR_TWE (1ULL << 13)
#define SCR_TLOR (1ULL << 14)
#define SCR_TERR (1ULL << 15)
#define SCR_APK (1ULL << 16)
#define SCR_API (1ULL << 17)
#define SCR_EEL2 (1ULL << 18)
#define SCR_EASE (1ULL << 19)
#define SCR_NMEA (1ULL << 20)
#define SCR_FIEN (1ULL << 21)
#define SCR_ENSCXT (1ULL << 25)
#define SCR_ATA (1ULL << 26)
#define SCR_FGTEN (1ULL << 27)
#define SCR_ECVEN (1ULL << 28)
#define SCR_TWEDEN (1ULL << 29)
#define SCR_TWEDEL MAKE_64BIT_MASK(30, 4)
#define SCR_TME (1ULL << 34)
#define SCR_AMVOFFEN (1ULL << 35)
#define SCR_ENAS0 (1ULL << 36)
#define SCR_ADEN (1ULL << 37)
#define SCR_HXEN (1ULL << 38)
#define SCR_TRNDR (1ULL << 40)
#define SCR_ENTP2 (1ULL << 41)
#define SCR_GPF (1ULL << 48)
#define SCR_NSE (1ULL << 62)
/* Return the current FPSCR value. */
uint32_t vfp_get_fpscr(CPUARMState *env);
void vfp_set_fpscr(CPUARMState *env, uint32_t val);
/* FPCR, Floating Point Control Register
* FPSR, Floating Poiht Status Register
*
* For A64 the FPSCR is split into two logically distinct registers,
* FPCR and FPSR. However since they still use non-overlapping bits
* we store the underlying state in fpscr and just mask on read/write.
*/
#define FPSR_MASK 0xf800009f
#define FPCR_MASK 0x07ff9f00
#define FPCR_IOE (1 << 8) /* Invalid Operation exception trap enable */
#define FPCR_DZE (1 << 9) /* Divide by Zero exception trap enable */
#define FPCR_OFE (1 << 10) /* Overflow exception trap enable */
#define FPCR_UFE (1 << 11) /* Underflow exception trap enable */
#define FPCR_IXE (1 << 12) /* Inexact exception trap enable */
#define FPCR_IDE (1 << 15) /* Input Denormal exception trap enable */
#define FPCR_FZ16 (1 << 19) /* ARMv8.2+, FP16 flush-to-zero */
#define FPCR_RMODE_MASK (3 << 22) /* Rounding mode */
#define FPCR_FZ (1 << 24) /* Flush-to-zero enable bit */
#define FPCR_DN (1 << 25) /* Default NaN enable bit */
#define FPCR_AHP (1 << 26) /* Alternative half-precision */
#define FPCR_QC (1 << 27) /* Cumulative saturation bit */
#define FPCR_V (1 << 28) /* FP overflow flag */
#define FPCR_C (1 << 29) /* FP carry flag */
#define FPCR_Z (1 << 30) /* FP zero flag */
#define FPCR_N (1 << 31) /* FP negative flag */
#define FPCR_LTPSIZE_SHIFT 16 /* LTPSIZE, M-profile only */
#define FPCR_LTPSIZE_MASK (7 << FPCR_LTPSIZE_SHIFT)
#define FPCR_LTPSIZE_LENGTH 3
#define FPCR_NZCV_MASK (FPCR_N | FPCR_Z | FPCR_C | FPCR_V)
#define FPCR_NZCVQC_MASK (FPCR_NZCV_MASK | FPCR_QC)
static inline uint32_t vfp_get_fpsr(CPUARMState *env)
{
return vfp_get_fpscr(env) & FPSR_MASK;
}
static inline void vfp_set_fpsr(CPUARMState *env, uint32_t val)
{
uint32_t new_fpscr = (vfp_get_fpscr(env) & ~FPSR_MASK) | (val & FPSR_MASK);
vfp_set_fpscr(env, new_fpscr);
}
static inline uint32_t vfp_get_fpcr(CPUARMState *env)
{
return vfp_get_fpscr(env) & FPCR_MASK;
}
static inline void vfp_set_fpcr(CPUARMState *env, uint32_t val)
{
uint32_t new_fpscr = (vfp_get_fpscr(env) & ~FPCR_MASK) | (val & FPCR_MASK);
vfp_set_fpscr(env, new_fpscr);
}
enum arm_cpu_mode {
ARM_CPU_MODE_USR = 0x10,
ARM_CPU_MODE_FIQ = 0x11,
ARM_CPU_MODE_IRQ = 0x12,
ARM_CPU_MODE_SVC = 0x13,
ARM_CPU_MODE_MON = 0x16,
ARM_CPU_MODE_ABT = 0x17,
ARM_CPU_MODE_HYP = 0x1a,
ARM_CPU_MODE_UND = 0x1b,
ARM_CPU_MODE_SYS = 0x1f
};
/* VFP system registers. */
#define ARM_VFP_FPSID 0
#define ARM_VFP_FPSCR 1
#define ARM_VFP_MVFR2 5
#define ARM_VFP_MVFR1 6
#define ARM_VFP_MVFR0 7
#define ARM_VFP_FPEXC 8
#define ARM_VFP_FPINST 9
#define ARM_VFP_FPINST2 10
/* These ones are M-profile only */
#define ARM_VFP_FPSCR_NZCVQC 2
#define ARM_VFP_VPR 12
#define ARM_VFP_P0 13
#define ARM_VFP_FPCXT_NS 14
#define ARM_VFP_FPCXT_S 15
/* QEMU-internal value meaning "FPSCR, but we care only about NZCV" */
#define QEMU_VFP_FPSCR_NZCV 0xffff
/* iwMMXt coprocessor control registers. */
#define ARM_IWMMXT_wCID 0
#define ARM_IWMMXT_wCon 1
#define ARM_IWMMXT_wCSSF 2
#define ARM_IWMMXT_wCASF 3
#define ARM_IWMMXT_wCGR0 8
#define ARM_IWMMXT_wCGR1 9
#define ARM_IWMMXT_wCGR2 10
#define ARM_IWMMXT_wCGR3 11
/* V7M CCR bits */
FIELD(V7M_CCR, NONBASETHRDENA, 0, 1)
FIELD(V7M_CCR, USERSETMPEND, 1, 1)
FIELD(V7M_CCR, UNALIGN_TRP, 3, 1)
FIELD(V7M_CCR, DIV_0_TRP, 4, 1)
FIELD(V7M_CCR, BFHFNMIGN, 8, 1)
FIELD(V7M_CCR, STKALIGN, 9, 1)
FIELD(V7M_CCR, STKOFHFNMIGN, 10, 1)
FIELD(V7M_CCR, DC, 16, 1)
FIELD(V7M_CCR, IC, 17, 1)
FIELD(V7M_CCR, BP, 18, 1)
FIELD(V7M_CCR, LOB, 19, 1)
FIELD(V7M_CCR, TRD, 20, 1)
/* V7M SCR bits */
FIELD(V7M_SCR, SLEEPONEXIT, 1, 1)
FIELD(V7M_SCR, SLEEPDEEP, 2, 1)
FIELD(V7M_SCR, SLEEPDEEPS, 3, 1)
FIELD(V7M_SCR, SEVONPEND, 4, 1)
/* V7M AIRCR bits */
FIELD(V7M_AIRCR, VECTRESET, 0, 1)
FIELD(V7M_AIRCR, VECTCLRACTIVE, 1, 1)
FIELD(V7M_AIRCR, SYSRESETREQ, 2, 1)
FIELD(V7M_AIRCR, SYSRESETREQS, 3, 1)
FIELD(V7M_AIRCR, PRIGROUP, 8, 3)
FIELD(V7M_AIRCR, BFHFNMINS, 13, 1)
FIELD(V7M_AIRCR, PRIS, 14, 1)
FIELD(V7M_AIRCR, ENDIANNESS, 15, 1)
FIELD(V7M_AIRCR, VECTKEY, 16, 16)
/* V7M CFSR bits for MMFSR */
FIELD(V7M_CFSR, IACCVIOL, 0, 1)
FIELD(V7M_CFSR, DACCVIOL, 1, 1)
FIELD(V7M_CFSR, MUNSTKERR, 3, 1)
FIELD(V7M_CFSR, MSTKERR, 4, 1)
FIELD(V7M_CFSR, MLSPERR, 5, 1)
FIELD(V7M_CFSR, MMARVALID, 7, 1)
/* V7M CFSR bits for BFSR */
FIELD(V7M_CFSR, IBUSERR, 8 + 0, 1)
FIELD(V7M_CFSR, PRECISERR, 8 + 1, 1)
FIELD(V7M_CFSR, IMPRECISERR, 8 + 2, 1)
FIELD(V7M_CFSR, UNSTKERR, 8 + 3, 1)
FIELD(V7M_CFSR, STKERR, 8 + 4, 1)
FIELD(V7M_CFSR, LSPERR, 8 + 5, 1)
FIELD(V7M_CFSR, BFARVALID, 8 + 7, 1)
/* V7M CFSR bits for UFSR */
FIELD(V7M_CFSR, UNDEFINSTR, 16 + 0, 1)
FIELD(V7M_CFSR, INVSTATE, 16 + 1, 1)
FIELD(V7M_CFSR, INVPC, 16 + 2, 1)
FIELD(V7M_CFSR, NOCP, 16 + 3, 1)
FIELD(V7M_CFSR, STKOF, 16 + 4, 1)
FIELD(V7M_CFSR, UNALIGNED, 16 + 8, 1)
FIELD(V7M_CFSR, DIVBYZERO, 16 + 9, 1)
/* V7M CFSR bit masks covering all of the subregister bits */
FIELD(V7M_CFSR, MMFSR, 0, 8)
FIELD(V7M_CFSR, BFSR, 8, 8)
FIELD(V7M_CFSR, UFSR, 16, 16)
/* V7M HFSR bits */
FIELD(V7M_HFSR, VECTTBL, 1, 1)
FIELD(V7M_HFSR, FORCED, 30, 1)
FIELD(V7M_HFSR, DEBUGEVT, 31, 1)
/* V7M DFSR bits */
FIELD(V7M_DFSR, HALTED, 0, 1)
FIELD(V7M_DFSR, BKPT, 1, 1)
FIELD(V7M_DFSR, DWTTRAP, 2, 1)
FIELD(V7M_DFSR, VCATCH, 3, 1)
FIELD(V7M_DFSR, EXTERNAL, 4, 1)
/* V7M SFSR bits */
FIELD(V7M_SFSR, INVEP, 0, 1)
FIELD(V7M_SFSR, INVIS, 1, 1)
FIELD(V7M_SFSR, INVER, 2, 1)
FIELD(V7M_SFSR, AUVIOL, 3, 1)
FIELD(V7M_SFSR, INVTRAN, 4, 1)
FIELD(V7M_SFSR, LSPERR, 5, 1)
FIELD(V7M_SFSR, SFARVALID, 6, 1)
FIELD(V7M_SFSR, LSERR, 7, 1)
/* v7M MPU_CTRL bits */
FIELD(V7M_MPU_CTRL, ENABLE, 0, 1)
FIELD(V7M_MPU_CTRL, HFNMIENA, 1, 1)
FIELD(V7M_MPU_CTRL, PRIVDEFENA, 2, 1)
/* v7M CLIDR bits */
FIELD(V7M_CLIDR, CTYPE_ALL, 0, 21)
FIELD(V7M_CLIDR, LOUIS, 21, 3)
FIELD(V7M_CLIDR, LOC, 24, 3)
FIELD(V7M_CLIDR, LOUU, 27, 3)
FIELD(V7M_CLIDR, ICB, 30, 2)
FIELD(V7M_CSSELR, IND, 0, 1)
FIELD(V7M_CSSELR, LEVEL, 1, 3)
/* We use the combination of InD and Level to index into cpu->ccsidr[];
* define a mask for this and check that it doesn't permit running off
* the end of the array.
*/
FIELD(V7M_CSSELR, INDEX, 0, 4)
/* v7M FPCCR bits */
FIELD(V7M_FPCCR, LSPACT, 0, 1)
FIELD(V7M_FPCCR, USER, 1, 1)
FIELD(V7M_FPCCR, S, 2, 1)
FIELD(V7M_FPCCR, THREAD, 3, 1)
FIELD(V7M_FPCCR, HFRDY, 4, 1)
FIELD(V7M_FPCCR, MMRDY, 5, 1)
FIELD(V7M_FPCCR, BFRDY, 6, 1)
FIELD(V7M_FPCCR, SFRDY, 7, 1)
FIELD(V7M_FPCCR, MONRDY, 8, 1)
FIELD(V7M_FPCCR, SPLIMVIOL, 9, 1)
FIELD(V7M_FPCCR, UFRDY, 10, 1)
FIELD(V7M_FPCCR, RES0, 11, 15)
FIELD(V7M_FPCCR, TS, 26, 1)
FIELD(V7M_FPCCR, CLRONRETS, 27, 1)
FIELD(V7M_FPCCR, CLRONRET, 28, 1)
FIELD(V7M_FPCCR, LSPENS, 29, 1)
FIELD(V7M_FPCCR, LSPEN, 30, 1)
FIELD(V7M_FPCCR, ASPEN, 31, 1)
/* These bits are banked. Others are non-banked and live in the M_REG_S bank */
#define R_V7M_FPCCR_BANKED_MASK \
(R_V7M_FPCCR_LSPACT_MASK | \
R_V7M_FPCCR_USER_MASK | \
R_V7M_FPCCR_THREAD_MASK | \
R_V7M_FPCCR_MMRDY_MASK | \
R_V7M_FPCCR_SPLIMVIOL_MASK | \
R_V7M_FPCCR_UFRDY_MASK | \
R_V7M_FPCCR_ASPEN_MASK)
/* v7M VPR bits */
FIELD(V7M_VPR, P0, 0, 16)
FIELD(V7M_VPR, MASK01, 16, 4)
FIELD(V7M_VPR, MASK23, 20, 4)
/*
* System register ID fields.
*/
FIELD(CLIDR_EL1, CTYPE1, 0, 3)
FIELD(CLIDR_EL1, CTYPE2, 3, 3)
FIELD(CLIDR_EL1, CTYPE3, 6, 3)
FIELD(CLIDR_EL1, CTYPE4, 9, 3)
FIELD(CLIDR_EL1, CTYPE5, 12, 3)
FIELD(CLIDR_EL1, CTYPE6, 15, 3)
FIELD(CLIDR_EL1, CTYPE7, 18, 3)
FIELD(CLIDR_EL1, LOUIS, 21, 3)
FIELD(CLIDR_EL1, LOC, 24, 3)
FIELD(CLIDR_EL1, LOUU, 27, 3)
FIELD(CLIDR_EL1, ICB, 30, 3)
/* When FEAT_CCIDX is implemented */
FIELD(CCSIDR_EL1, CCIDX_LINESIZE, 0, 3)
FIELD(CCSIDR_EL1, CCIDX_ASSOCIATIVITY, 3, 21)
FIELD(CCSIDR_EL1, CCIDX_NUMSETS, 32, 24)
/* When FEAT_CCIDX is not implemented */
FIELD(CCSIDR_EL1, LINESIZE, 0, 3)
FIELD(CCSIDR_EL1, ASSOCIATIVITY, 3, 10)
FIELD(CCSIDR_EL1, NUMSETS, 13, 15)
FIELD(CTR_EL0, IMINLINE, 0, 4)
FIELD(CTR_EL0, L1IP, 14, 2)
FIELD(CTR_EL0, DMINLINE, 16, 4)
FIELD(CTR_EL0, ERG, 20, 4)
FIELD(CTR_EL0, CWG, 24, 4)
FIELD(CTR_EL0, IDC, 28, 1)
FIELD(CTR_EL0, DIC, 29, 1)
FIELD(CTR_EL0, TMINLINE, 32, 6)
FIELD(MIDR_EL1, REVISION, 0, 4)
FIELD(MIDR_EL1, PARTNUM, 4, 12)
FIELD(MIDR_EL1, ARCHITECTURE, 16, 4)
FIELD(MIDR_EL1, VARIANT, 20, 4)
FIELD(MIDR_EL1, IMPLEMENTER, 24, 8)
FIELD(ID_ISAR0, SWAP, 0, 4)
FIELD(ID_ISAR0, BITCOUNT, 4, 4)
FIELD(ID_ISAR0, BITFIELD, 8, 4)
FIELD(ID_ISAR0, CMPBRANCH, 12, 4)
FIELD(ID_ISAR0, COPROC, 16, 4)
FIELD(ID_ISAR0, DEBUG, 20, 4)
FIELD(ID_ISAR0, DIVIDE, 24, 4)
FIELD(ID_ISAR1, ENDIAN, 0, 4)
FIELD(ID_ISAR1, EXCEPT, 4, 4)
FIELD(ID_ISAR1, EXCEPT_AR, 8, 4)
FIELD(ID_ISAR1, EXTEND, 12, 4)
FIELD(ID_ISAR1, IFTHEN, 16, 4)
FIELD(ID_ISAR1, IMMEDIATE, 20, 4)
FIELD(ID_ISAR1, INTERWORK, 24, 4)
FIELD(ID_ISAR1, JAZELLE, 28, 4)
FIELD(ID_ISAR2, LOADSTORE, 0, 4)
FIELD(ID_ISAR2, MEMHINT, 4, 4)
FIELD(ID_ISAR2, MULTIACCESSINT, 8, 4)
FIELD(ID_ISAR2, MULT, 12, 4)
FIELD(ID_ISAR2, MULTS, 16, 4)
FIELD(ID_ISAR2, MULTU, 20, 4)
FIELD(ID_ISAR2, PSR_AR, 24, 4)
FIELD(ID_ISAR2, REVERSAL, 28, 4)
FIELD(ID_ISAR3, SATURATE, 0, 4)
FIELD(ID_ISAR3, SIMD, 4, 4)
FIELD(ID_ISAR3, SVC, 8, 4)
FIELD(ID_ISAR3, SYNCHPRIM, 12, 4)
FIELD(ID_ISAR3, TABBRANCH, 16, 4)
FIELD(ID_ISAR3, T32COPY, 20, 4)
FIELD(ID_ISAR3, TRUENOP, 24, 4)
FIELD(ID_ISAR3, T32EE, 28, 4)
FIELD(ID_ISAR4, UNPRIV, 0, 4)
FIELD(ID_ISAR4, WITHSHIFTS, 4, 4)
FIELD(ID_ISAR4, WRITEBACK, 8, 4)
FIELD(ID_ISAR4, SMC, 12, 4)
FIELD(ID_ISAR4, BARRIER, 16, 4)
FIELD(ID_ISAR4, SYNCHPRIM_FRAC, 20, 4)
FIELD(ID_ISAR4, PSR_M, 24, 4)
FIELD(ID_ISAR4, SWP_FRAC, 28, 4)
FIELD(ID_ISAR5, SEVL, 0, 4)
FIELD(ID_ISAR5, AES, 4, 4)
FIELD(ID_ISAR5, SHA1, 8, 4)
FIELD(ID_ISAR5, SHA2, 12, 4)
FIELD(ID_ISAR5, CRC32, 16, 4)
FIELD(ID_ISAR5, RDM, 24, 4)
FIELD(ID_ISAR5, VCMA, 28, 4)
FIELD(ID_ISAR6, JSCVT, 0, 4)
FIELD(ID_ISAR6, DP, 4, 4)
FIELD(ID_ISAR6, FHM, 8, 4)
FIELD(ID_ISAR6, SB, 12, 4)
FIELD(ID_ISAR6, SPECRES, 16, 4)
FIELD(ID_ISAR6, BF16, 20, 4)
FIELD(ID_ISAR6, I8MM, 24, 4)
FIELD(ID_MMFR0, VMSA, 0, 4)
FIELD(ID_MMFR0, PMSA, 4, 4)
FIELD(ID_MMFR0, OUTERSHR, 8, 4)
FIELD(ID_MMFR0, SHARELVL, 12, 4)
FIELD(ID_MMFR0, TCM, 16, 4)
FIELD(ID_MMFR0, AUXREG, 20, 4)
FIELD(ID_MMFR0, FCSE, 24, 4)
FIELD(ID_MMFR0, INNERSHR, 28, 4)
FIELD(ID_MMFR1, L1HVDVA, 0, 4)
FIELD(ID_MMFR1, L1UNIVA, 4, 4)
FIELD(ID_MMFR1, L1HVDSW, 8, 4)
FIELD(ID_MMFR1, L1UNISW, 12, 4)
FIELD(ID_MMFR1, L1HVD, 16, 4)
FIELD(ID_MMFR1, L1UNI, 20, 4)
FIELD(ID_MMFR1, L1TSTCLN, 24, 4)
FIELD(ID_MMFR1, BPRED, 28, 4)
FIELD(ID_MMFR2, L1HVDFG, 0, 4)
FIELD(ID_MMFR2, L1HVDBG, 4, 4)
FIELD(ID_MMFR2, L1HVDRNG, 8, 4)
FIELD(ID_MMFR2, HVDTLB, 12, 4)
FIELD(ID_MMFR2, UNITLB, 16, 4)
FIELD(ID_MMFR2, MEMBARR, 20, 4)
FIELD(ID_MMFR2, WFISTALL, 24, 4)
FIELD(ID_MMFR2, HWACCFLG, 28, 4)
FIELD(ID_MMFR3, CMAINTVA, 0, 4)
FIELD(ID_MMFR3, CMAINTSW, 4, 4)
FIELD(ID_MMFR3, BPMAINT, 8, 4)
FIELD(ID_MMFR3, MAINTBCST, 12, 4)
FIELD(ID_MMFR3, PAN, 16, 4)
FIELD(ID_MMFR3, COHWALK, 20, 4)
FIELD(ID_MMFR3, CMEMSZ, 24, 4)
FIELD(ID_MMFR3, SUPERSEC, 28, 4)
FIELD(ID_MMFR4, SPECSEI, 0, 4)
FIELD(ID_MMFR4, AC2, 4, 4)
FIELD(ID_MMFR4, XNX, 8, 4)
FIELD(ID_MMFR4, CNP, 12, 4)
FIELD(ID_MMFR4, HPDS, 16, 4)
FIELD(ID_MMFR4, LSM, 20, 4)
FIELD(ID_MMFR4, CCIDX, 24, 4)
FIELD(ID_MMFR4, EVT, 28, 4)
FIELD(ID_MMFR5, ETS, 0, 4)
FIELD(ID_MMFR5, NTLBPA, 4, 4)
FIELD(ID_PFR0, STATE0, 0, 4)
FIELD(ID_PFR0, STATE1, 4, 4)
FIELD(ID_PFR0, STATE2, 8, 4)
FIELD(ID_PFR0, STATE3, 12, 4)
FIELD(ID_PFR0, CSV2, 16, 4)
FIELD(ID_PFR0, AMU, 20, 4)
FIELD(ID_PFR0, DIT, 24, 4)
FIELD(ID_PFR0, RAS, 28, 4)
FIELD(ID_PFR1, PROGMOD, 0, 4)
FIELD(ID_PFR1, SECURITY, 4, 4)
FIELD(ID_PFR1, MPROGMOD, 8, 4)
FIELD(ID_PFR1, VIRTUALIZATION, 12, 4)
FIELD(ID_PFR1, GENTIMER, 16, 4)
FIELD(ID_PFR1, SEC_FRAC, 20, 4)
FIELD(ID_PFR1, VIRT_FRAC, 24, 4)
FIELD(ID_PFR1, GIC, 28, 4)
FIELD(ID_PFR2, CSV3, 0, 4)
FIELD(ID_PFR2, SSBS, 4, 4)
FIELD(ID_PFR2, RAS_FRAC, 8, 4)
FIELD(ID_AA64ISAR0, AES, 4, 4)
FIELD(ID_AA64ISAR0, SHA1, 8, 4)
FIELD(ID_AA64ISAR0, SHA2, 12, 4)
FIELD(ID_AA64ISAR0, CRC32, 16, 4)
FIELD(ID_AA64ISAR0, ATOMIC, 20, 4)
FIELD(ID_AA64ISAR0, TME, 24, 4)
FIELD(ID_AA64ISAR0, RDM, 28, 4)
FIELD(ID_AA64ISAR0, SHA3, 32, 4)
FIELD(ID_AA64ISAR0, SM3, 36, 4)
FIELD(ID_AA64ISAR0, SM4, 40, 4)
FIELD(ID_AA64ISAR0, DP, 44, 4)
FIELD(ID_AA64ISAR0, FHM, 48, 4)
FIELD(ID_AA64ISAR0, TS, 52, 4)
FIELD(ID_AA64ISAR0, TLB, 56, 4)
FIELD(ID_AA64ISAR0, RNDR, 60, 4)
FIELD(ID_AA64ISAR1, DPB, 0, 4)
FIELD(ID_AA64ISAR1, APA, 4, 4)
FIELD(ID_AA64ISAR1, API, 8, 4)
FIELD(ID_AA64ISAR1, JSCVT, 12, 4)
FIELD(ID_AA64ISAR1, FCMA, 16, 4)
FIELD(ID_AA64ISAR1, LRCPC, 20, 4)
FIELD(ID_AA64ISAR1, GPA, 24, 4)
FIELD(ID_AA64ISAR1, GPI, 28, 4)
FIELD(ID_AA64ISAR1, FRINTTS, 32, 4)
FIELD(ID_AA64ISAR1, SB, 36, 4)
FIELD(ID_AA64ISAR1, SPECRES, 40, 4)
FIELD(ID_AA64ISAR1, BF16, 44, 4)
FIELD(ID_AA64ISAR1, DGH, 48, 4)
FIELD(ID_AA64ISAR1, I8MM, 52, 4)
FIELD(ID_AA64ISAR1, XS, 56, 4)
FIELD(ID_AA64ISAR1, LS64, 60, 4)
FIELD(ID_AA64ISAR2, WFXT, 0, 4)
FIELD(ID_AA64ISAR2, RPRES, 4, 4)
FIELD(ID_AA64ISAR2, GPA3, 8, 4)
FIELD(ID_AA64ISAR2, APA3, 12, 4)
FIELD(ID_AA64ISAR2, MOPS, 16, 4)
FIELD(ID_AA64ISAR2, BC, 20, 4)
FIELD(ID_AA64ISAR2, PAC_FRAC, 24, 4)
FIELD(ID_AA64ISAR2, CLRBHB, 28, 4)
FIELD(ID_AA64ISAR2, SYSREG_128, 32, 4)
FIELD(ID_AA64ISAR2, SYSINSTR_128, 36, 4)
FIELD(ID_AA64ISAR2, PRFMSLC, 40, 4)
FIELD(ID_AA64ISAR2, RPRFM, 48, 4)
FIELD(ID_AA64ISAR2, CSSC, 52, 4)
FIELD(ID_AA64ISAR2, ATS1A, 60, 4)
FIELD(ID_AA64PFR0, EL0, 0, 4)
FIELD(ID_AA64PFR0, EL1, 4, 4)
FIELD(ID_AA64PFR0, EL2, 8, 4)
FIELD(ID_AA64PFR0, EL3, 12, 4)
FIELD(ID_AA64PFR0, FP, 16, 4)
FIELD(ID_AA64PFR0, ADVSIMD, 20, 4)
FIELD(ID_AA64PFR0, GIC, 24, 4)
FIELD(ID_AA64PFR0, RAS, 28, 4)
FIELD(ID_AA64PFR0, SVE, 32, 4)
FIELD(ID_AA64PFR0, SEL2, 36, 4)
FIELD(ID_AA64PFR0, MPAM, 40, 4)
FIELD(ID_AA64PFR0, AMU, 44, 4)
FIELD(ID_AA64PFR0, DIT, 48, 4)
FIELD(ID_AA64PFR0, RME, 52, 4)
FIELD(ID_AA64PFR0, CSV2, 56, 4)
FIELD(ID_AA64PFR0, CSV3, 60, 4)
FIELD(ID_AA64PFR1, BT, 0, 4)
FIELD(ID_AA64PFR1, SSBS, 4, 4)
FIELD(ID_AA64PFR1, MTE, 8, 4)
FIELD(ID_AA64PFR1, RAS_FRAC, 12, 4)
FIELD(ID_AA64PFR1, MPAM_FRAC, 16, 4)
FIELD(ID_AA64PFR1, SME, 24, 4)
FIELD(ID_AA64PFR1, RNDR_TRAP, 28, 4)
FIELD(ID_AA64PFR1, CSV2_FRAC, 32, 4)
FIELD(ID_AA64PFR1, NMI, 36, 4)
FIELD(ID_AA64PFR1, MTE_FRAC, 40, 4)
FIELD(ID_AA64PFR1, GCS, 44, 4)
FIELD(ID_AA64PFR1, THE, 48, 4)
FIELD(ID_AA64PFR1, MTEX, 52, 4)
FIELD(ID_AA64PFR1, DF2, 56, 4)
FIELD(ID_AA64PFR1, PFAR, 60, 4)
FIELD(ID_AA64MMFR0, PARANGE, 0, 4)
FIELD(ID_AA64MMFR0, ASIDBITS, 4, 4)
FIELD(ID_AA64MMFR0, BIGEND, 8, 4)
FIELD(ID_AA64MMFR0, SNSMEM, 12, 4)
FIELD(ID_AA64MMFR0, BIGENDEL0, 16, 4)
FIELD(ID_AA64MMFR0, TGRAN16, 20, 4)
FIELD(ID_AA64MMFR0, TGRAN64, 24, 4)
FIELD(ID_AA64MMFR0, TGRAN4, 28, 4)
FIELD(ID_AA64MMFR0, TGRAN16_2, 32, 4)
FIELD(ID_AA64MMFR0, TGRAN64_2, 36, 4)
FIELD(ID_AA64MMFR0, TGRAN4_2, 40, 4)
FIELD(ID_AA64MMFR0, EXS, 44, 4)
FIELD(ID_AA64MMFR0, FGT, 56, 4)
FIELD(ID_AA64MMFR0, ECV, 60, 4)
FIELD(ID_AA64MMFR1, HAFDBS, 0, 4)
FIELD(ID_AA64MMFR1, VMIDBITS, 4, 4)
FIELD(ID_AA64MMFR1, VH, 8, 4)
FIELD(ID_AA64MMFR1, HPDS, 12, 4)
FIELD(ID_AA64MMFR1, LO, 16, 4)
FIELD(ID_AA64MMFR1, PAN, 20, 4)
FIELD(ID_AA64MMFR1, SPECSEI, 24, 4)
FIELD(ID_AA64MMFR1, XNX, 28, 4)
FIELD(ID_AA64MMFR1, TWED, 32, 4)
FIELD(ID_AA64MMFR1, ETS, 36, 4)
FIELD(ID_AA64MMFR1, HCX, 40, 4)
FIELD(ID_AA64MMFR1, AFP, 44, 4)
FIELD(ID_AA64MMFR1, NTLBPA, 48, 4)
FIELD(ID_AA64MMFR1, TIDCP1, 52, 4)
FIELD(ID_AA64MMFR1, CMOW, 56, 4)
FIELD(ID_AA64MMFR1, ECBHB, 60, 4)
FIELD(ID_AA64MMFR2, CNP, 0, 4)
FIELD(ID_AA64MMFR2, UAO, 4, 4)
FIELD(ID_AA64MMFR2, LSM, 8, 4)
FIELD(ID_AA64MMFR2, IESB, 12, 4)
FIELD(ID_AA64MMFR2, VARANGE, 16, 4)
FIELD(ID_AA64MMFR2, CCIDX, 20, 4)
FIELD(ID_AA64MMFR2, NV, 24, 4)
FIELD(ID_AA64MMFR2, ST, 28, 4)
FIELD(ID_AA64MMFR2, AT, 32, 4)
FIELD(ID_AA64MMFR2, IDS, 36, 4)
FIELD(ID_AA64MMFR2, FWB, 40, 4)
FIELD(ID_AA64MMFR2, TTL, 48, 4)
FIELD(ID_AA64MMFR2, BBM, 52, 4)
FIELD(ID_AA64MMFR2, EVT, 56, 4)
FIELD(ID_AA64MMFR2, E0PD, 60, 4)
FIELD(ID_AA64MMFR3, TCRX, 0, 4)
FIELD(ID_AA64MMFR3, SCTLRX, 4, 4)
FIELD(ID_AA64MMFR3, S1PIE, 8, 4)
FIELD(ID_AA64MMFR3, S2PIE, 12, 4)
FIELD(ID_AA64MMFR3, S1POE, 16, 4)
FIELD(ID_AA64MMFR3, S2POE, 20, 4)
FIELD(ID_AA64MMFR3, AIE, 24, 4)
FIELD(ID_AA64MMFR3, MEC, 28, 4)
FIELD(ID_AA64MMFR3, D128, 32, 4)
FIELD(ID_AA64MMFR3, D128_2, 36, 4)
FIELD(ID_AA64MMFR3, SNERR, 40, 4)
FIELD(ID_AA64MMFR3, ANERR, 44, 4)
FIELD(ID_AA64MMFR3, SDERR, 52, 4)
FIELD(ID_AA64MMFR3, ADERR, 56, 4)
FIELD(ID_AA64MMFR3, SPEC_FPACC, 60, 4)
FIELD(ID_AA64DFR0, DEBUGVER, 0, 4)
FIELD(ID_AA64DFR0, TRACEVER, 4, 4)
FIELD(ID_AA64DFR0, PMUVER, 8, 4)
FIELD(ID_AA64DFR0, BRPS, 12, 4)
FIELD(ID_AA64DFR0, PMSS, 16, 4)
FIELD(ID_AA64DFR0, WRPS, 20, 4)
FIELD(ID_AA64DFR0, SEBEP, 24, 4)
FIELD(ID_AA64DFR0, CTX_CMPS, 28, 4)
FIELD(ID_AA64DFR0, PMSVER, 32, 4)
FIELD(ID_AA64DFR0, DOUBLELOCK, 36, 4)
FIELD(ID_AA64DFR0, TRACEFILT, 40, 4)
FIELD(ID_AA64DFR0, TRACEBUFFER, 44, 4)
FIELD(ID_AA64DFR0, MTPMU, 48, 4)
FIELD(ID_AA64DFR0, BRBE, 52, 4)
FIELD(ID_AA64DFR0, EXTTRCBUFF, 56, 4)
FIELD(ID_AA64DFR0, HPMN0, 60, 4)
FIELD(ID_AA64ZFR0, SVEVER, 0, 4)
FIELD(ID_AA64ZFR0, AES, 4, 4)
FIELD(ID_AA64ZFR0, BITPERM, 16, 4)
FIELD(ID_AA64ZFR0, BFLOAT16, 20, 4)
FIELD(ID_AA64ZFR0, B16B16, 24, 4)
FIELD(ID_AA64ZFR0, SHA3, 32, 4)
FIELD(ID_AA64ZFR0, SM4, 40, 4)
FIELD(ID_AA64ZFR0, I8MM, 44, 4)
FIELD(ID_AA64ZFR0, F32MM, 52, 4)
FIELD(ID_AA64ZFR0, F64MM, 56, 4)
FIELD(ID_AA64SMFR0, F32F32, 32, 1)
FIELD(ID_AA64SMFR0, BI32I32, 33, 1)
FIELD(ID_AA64SMFR0, B16F32, 34, 1)
FIELD(ID_AA64SMFR0, F16F32, 35, 1)
FIELD(ID_AA64SMFR0, I8I32, 36, 4)
FIELD(ID_AA64SMFR0, F16F16, 42, 1)
FIELD(ID_AA64SMFR0, B16B16, 43, 1)
FIELD(ID_AA64SMFR0, I16I32, 44, 4)
FIELD(ID_AA64SMFR0, F64F64, 48, 1)
FIELD(ID_AA64SMFR0, I16I64, 52, 4)
FIELD(ID_AA64SMFR0, SMEVER, 56, 4)
FIELD(ID_AA64SMFR0, FA64, 63, 1)
FIELD(ID_DFR0, COPDBG, 0, 4)
FIELD(ID_DFR0, COPSDBG, 4, 4)
FIELD(ID_DFR0, MMAPDBG, 8, 4)
FIELD(ID_DFR0, COPTRC, 12, 4)
FIELD(ID_DFR0, MMAPTRC, 16, 4)
FIELD(ID_DFR0, MPROFDBG, 20, 4)
FIELD(ID_DFR0, PERFMON, 24, 4)
FIELD(ID_DFR0, TRACEFILT, 28, 4)
FIELD(ID_DFR1, MTPMU, 0, 4)
FIELD(ID_DFR1, HPMN0, 4, 4)
FIELD(DBGDIDR, SE_IMP, 12, 1)
FIELD(DBGDIDR, NSUHD_IMP, 14, 1)
FIELD(DBGDIDR, VERSION, 16, 4)
FIELD(DBGDIDR, CTX_CMPS, 20, 4)
FIELD(DBGDIDR, BRPS, 24, 4)
FIELD(DBGDIDR, WRPS, 28, 4)
FIELD(DBGDEVID, PCSAMPLE, 0, 4)
FIELD(DBGDEVID, WPADDRMASK, 4, 4)
FIELD(DBGDEVID, BPADDRMASK, 8, 4)
FIELD(DBGDEVID, VECTORCATCH, 12, 4)
FIELD(DBGDEVID, VIRTEXTNS, 16, 4)
FIELD(DBGDEVID, DOUBLELOCK, 20, 4)
FIELD(DBGDEVID, AUXREGS, 24, 4)
FIELD(DBGDEVID, CIDMASK, 28, 4)
FIELD(MVFR0, SIMDREG, 0, 4)
FIELD(MVFR0, FPSP, 4, 4)
FIELD(MVFR0, FPDP, 8, 4)
FIELD(MVFR0, FPTRAP, 12, 4)
FIELD(MVFR0, FPDIVIDE, 16, 4)
FIELD(MVFR0, FPSQRT, 20, 4)
FIELD(MVFR0, FPSHVEC, 24, 4)
FIELD(MVFR0, FPROUND, 28, 4)
FIELD(MVFR1, FPFTZ, 0, 4)
FIELD(MVFR1, FPDNAN, 4, 4)
FIELD(MVFR1, SIMDLS, 8, 4) /* A-profile only */
FIELD(MVFR1, SIMDINT, 12, 4) /* A-profile only */
FIELD(MVFR1, SIMDSP, 16, 4) /* A-profile only */
FIELD(MVFR1, SIMDHP, 20, 4) /* A-profile only */
FIELD(MVFR1, MVE, 8, 4) /* M-profile only */
FIELD(MVFR1, FP16, 20, 4) /* M-profile only */
FIELD(MVFR1, FPHP, 24, 4)
FIELD(MVFR1, SIMDFMAC, 28, 4)
FIELD(MVFR2, SIMDMISC, 0, 4)
FIELD(MVFR2, FPMISC, 4, 4)
FIELD(GPCCR, PPS, 0, 3)
FIELD(GPCCR, IRGN, 8, 2)
FIELD(GPCCR, ORGN, 10, 2)
FIELD(GPCCR, SH, 12, 2)
FIELD(GPCCR, PGS, 14, 2)
FIELD(GPCCR, GPC, 16, 1)
FIELD(GPCCR, GPCP, 17, 1)
FIELD(GPCCR, L0GPTSZ, 20, 4)
FIELD(MFAR, FPA, 12, 40)
FIELD(MFAR, NSE, 62, 1)
FIELD(MFAR, NS, 63, 1)
QEMU_BUILD_BUG_ON(ARRAY_SIZE(((ARMCPU *)0)->ccsidr) <= R_V7M_CSSELR_INDEX_MASK);
/* If adding a feature bit which corresponds to a Linux ELF
* HWCAP bit, remember to update the feature-bit-to-hwcap
* mapping in linux-user/elfload.c:get_elf_hwcap().
*/
enum arm_features {
ARM_FEATURE_AUXCR, /* ARM1026 Auxiliary control register. */
ARM_FEATURE_XSCALE, /* Intel XScale extensions. */
ARM_FEATURE_IWMMXT, /* Intel iwMMXt extension. */
ARM_FEATURE_V6,
ARM_FEATURE_V6K,
ARM_FEATURE_V7,
ARM_FEATURE_THUMB2,
ARM_FEATURE_PMSA, /* no MMU; may have Memory Protection Unit */
ARM_FEATURE_NEON,
ARM_FEATURE_M, /* Microcontroller profile. */
ARM_FEATURE_OMAPCP, /* OMAP specific CP15 ops handling. */
ARM_FEATURE_THUMB2EE,
ARM_FEATURE_V7MP, /* v7 Multiprocessing Extensions */
ARM_FEATURE_V7VE, /* v7 Virtualization Extensions (non-EL2 parts) */
ARM_FEATURE_V4T,
ARM_FEATURE_V5,
ARM_FEATURE_STRONGARM,
ARM_FEATURE_VAPA, /* cp15 VA to PA lookups */
ARM_FEATURE_GENERIC_TIMER,
ARM_FEATURE_MVFR, /* Media and VFP Feature Registers 0 and 1 */
ARM_FEATURE_DUMMY_C15_REGS, /* RAZ/WI all of cp15 crn=15 */
ARM_FEATURE_CACHE_TEST_CLEAN, /* 926/1026 style test-and-clean ops */
ARM_FEATURE_CACHE_DIRTY_REG, /* 1136/1176 cache dirty status register */
ARM_FEATURE_CACHE_BLOCK_OPS, /* v6 optional cache block operations */
ARM_FEATURE_MPIDR, /* has cp15 MPIDR */
ARM_FEATURE_LPAE, /* has Large Physical Address Extension */
ARM_FEATURE_V8,
ARM_FEATURE_AARCH64, /* supports 64 bit mode */
ARM_FEATURE_CBAR, /* has cp15 CBAR */
ARM_FEATURE_CBAR_RO, /* has cp15 CBAR and it is read-only */
ARM_FEATURE_EL2, /* has EL2 Virtualization support */
ARM_FEATURE_EL3, /* has EL3 Secure monitor support */
ARM_FEATURE_THUMB_DSP, /* DSP insns supported in the Thumb encodings */
ARM_FEATURE_PMU, /* has PMU support */
ARM_FEATURE_VBAR, /* has cp15 VBAR */
ARM_FEATURE_M_SECURITY, /* M profile Security Extension */
ARM_FEATURE_M_MAIN, /* M profile Main Extension */
ARM_FEATURE_V8_1M, /* M profile extras only in v8.1M and later */
/*
* ARM_FEATURE_BACKCOMPAT_CNTFRQ makes the CPU default cntfrq be 62.5MHz
* if the board doesn't set a value, instead of 1GHz. It is for backwards
* compatibility and used only with CPU definitions that were already
* in QEMU before we changed the default. It should not be set on any
* CPU types added in future.
*/
ARM_FEATURE_BACKCOMPAT_CNTFRQ, /* 62.5MHz timer default */
};
static inline int arm_feature(CPUARMState *env, int feature)
{
return (env->features & (1ULL << feature)) != 0;
}
void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp);
/*
* ARM v9 security states.
* The ordering of the enumeration corresponds to the low 2 bits
* of the GPI value, and (except for Root) the concat of NSE:NS.
*/
typedef enum ARMSecuritySpace {
ARMSS_Secure = 0,
ARMSS_NonSecure = 1,
ARMSS_Root = 2,
ARMSS_Realm = 3,
} ARMSecuritySpace;
/* Return true if @space is secure, in the pre-v9 sense. */
static inline bool arm_space_is_secure(ARMSecuritySpace space)
{
return space == ARMSS_Secure || space == ARMSS_Root;
}
/* Return the ARMSecuritySpace for @secure, assuming !RME or EL[0-2]. */
static inline ARMSecuritySpace arm_secure_to_space(bool secure)
{
return secure ? ARMSS_Secure : ARMSS_NonSecure;
}
#if !defined(CONFIG_USER_ONLY)
/**
* arm_security_space_below_el3:
* @env: cpu context
*
* Return the security space of exception levels below EL3, following
* an exception return to those levels. Unlike arm_security_space,
* this doesn't care about the current EL.
*/
ARMSecuritySpace arm_security_space_below_el3(CPUARMState *env);
/**
* arm_is_secure_below_el3:
* @env: cpu context
*
* Return true if exception levels below EL3 are in secure state,
* or would be following an exception return to those levels.
*/
static inline bool arm_is_secure_below_el3(CPUARMState *env)
{
ARMSecuritySpace ss = arm_security_space_below_el3(env);
return ss == ARMSS_Secure;
}
/* Return true if the CPU is AArch64 EL3 or AArch32 Mon */
static inline bool arm_is_el3_or_mon(CPUARMState *env)
{
assert(!arm_feature(env, ARM_FEATURE_M));
if (arm_feature(env, ARM_FEATURE_EL3)) {
if (is_a64(env) && extract32(env->pstate, 2, 2) == 3) {
/* CPU currently in AArch64 state and EL3 */
return true;
} else if (!is_a64(env) &&
(env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_MON) {
/* CPU currently in AArch32 state and monitor mode */
return true;
}
}
return false;
}
/**
* arm_security_space:
* @env: cpu context
*
* Return the current security space of the cpu.
*/
ARMSecuritySpace arm_security_space(CPUARMState *env);
/**
* arm_is_secure:
* @env: cpu context
*
* Return true if the processor is in secure state.
*/
static inline bool arm_is_secure(CPUARMState *env)
{
return arm_space_is_secure(arm_security_space(env));
}
/*
* Return true if the current security state has AArch64 EL2 or AArch32 Hyp.
* This corresponds to the pseudocode EL2Enabled().
*/
static inline bool arm_is_el2_enabled_secstate(CPUARMState *env,
ARMSecuritySpace space)
{
assert(space != ARMSS_Root);
return arm_feature(env, ARM_FEATURE_EL2)
&& (space != ARMSS_Secure || (env->cp15.scr_el3 & SCR_EEL2));
}
static inline bool arm_is_el2_enabled(CPUARMState *env)
{
return arm_is_el2_enabled_secstate(env, arm_security_space_below_el3(env));
}
#else
static inline ARMSecuritySpace arm_security_space_below_el3(CPUARMState *env)
{
return ARMSS_NonSecure;
}
static inline bool arm_is_secure_below_el3(CPUARMState *env)
{
return false;
}
static inline ARMSecuritySpace arm_security_space(CPUARMState *env)
{
return ARMSS_NonSecure;
}
static inline bool arm_is_secure(CPUARMState *env)
{
return false;
}
static inline bool arm_is_el2_enabled_secstate(CPUARMState *env,
ARMSecuritySpace space)
{
return false;
}
static inline bool arm_is_el2_enabled(CPUARMState *env)
{
return false;
}
#endif
/**
* arm_hcr_el2_eff(): Return the effective value of HCR_EL2.
* E.g. when in secure state, fields in HCR_EL2 are suppressed,
* "for all purposes other than a direct read or write access of HCR_EL2."
* Not included here is HCR_RW.
*/
uint64_t arm_hcr_el2_eff_secstate(CPUARMState *env, ARMSecuritySpace space);
uint64_t arm_hcr_el2_eff(CPUARMState *env);
uint64_t arm_hcrx_el2_eff(CPUARMState *env);
/* Return true if the specified exception level is running in AArch64 state. */
static inline bool arm_el_is_aa64(CPUARMState *env, int el)
{
/* This isn't valid for EL0 (if we're in EL0, is_a64() is what you want,
* and if we're not in EL0 then the state of EL0 isn't well defined.)
*/
assert(el >= 1 && el <= 3);
bool aa64 = arm_feature(env, ARM_FEATURE_AARCH64);
/* The highest exception level is always at the maximum supported
* register width, and then lower levels have a register width controlled
* by bits in the SCR or HCR registers.
*/
if (el == 3) {
return aa64;
}
if (arm_feature(env, ARM_FEATURE_EL3) &&
((env->cp15.scr_el3 & SCR_NS) || !(env->cp15.scr_el3 & SCR_EEL2))) {
aa64 = aa64 && (env->cp15.scr_el3 & SCR_RW);
}
if (el == 2) {
return aa64;
}
if (arm_is_el2_enabled(env)) {
aa64 = aa64 && (env->cp15.hcr_el2 & HCR_RW);
}
return aa64;
}
/* Function for determining whether guest cp register reads and writes should
* access the secure or non-secure bank of a cp register. When EL3 is
* operating in AArch32 state, the NS-bit determines whether the secure
* instance of a cp register should be used. When EL3 is AArch64 (or if
* it doesn't exist at all) then there is no register banking, and all
* accesses are to the non-secure version.
*/
static inline bool access_secure_reg(CPUARMState *env)
{
bool ret = (arm_feature(env, ARM_FEATURE_EL3) &&
!arm_el_is_aa64(env, 3) &&
!(env->cp15.scr_el3 & SCR_NS));
return ret;
}
/* Macros for accessing a specified CP register bank */
#define A32_BANKED_REG_GET(_env, _regname, _secure) \
((_secure) ? (_env)->cp15._regname##_s : (_env)->cp15._regname##_ns)
#define A32_BANKED_REG_SET(_env, _regname, _secure, _val) \
do { \
if (_secure) { \
(_env)->cp15._regname##_s = (_val); \
} else { \
(_env)->cp15._regname##_ns = (_val); \
} \
} while (0)
/* Macros for automatically accessing a specific CP register bank depending on
* the current secure state of the system. These macros are not intended for
* supporting instruction translation reads/writes as these are dependent
* solely on the SCR.NS bit and not the mode.
*/
#define A32_BANKED_CURRENT_REG_GET(_env, _regname) \
A32_BANKED_REG_GET((_env), _regname, \
(arm_is_secure(_env) && !arm_el_is_aa64((_env), 3)))
#define A32_BANKED_CURRENT_REG_SET(_env, _regname, _val) \
A32_BANKED_REG_SET((_env), _regname, \
(arm_is_secure(_env) && !arm_el_is_aa64((_env), 3)), \
(_val))
uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx,
uint32_t cur_el, bool secure);
/* Return the highest implemented Exception Level */
static inline int arm_highest_el(CPUARMState *env)
{
if (arm_feature(env, ARM_FEATURE_EL3)) {
return 3;
}
if (arm_feature(env, ARM_FEATURE_EL2)) {
return 2;
}
return 1;
}
/* Return true if a v7M CPU is in Handler mode */
static inline bool arm_v7m_is_handler_mode(CPUARMState *env)
{
return env->v7m.exception != 0;
}
/* Return the current Exception Level (as per ARMv8; note that this differs
* from the ARMv7 Privilege Level).
*/
static inline int arm_current_el(CPUARMState *env)
{
if (arm_feature(env, ARM_FEATURE_M)) {
return arm_v7m_is_handler_mode(env) ||
!(env->v7m.control[env->v7m.secure] & 1);
}
if (is_a64(env)) {
return extract32(env->pstate, 2, 2);
}
switch (env->uncached_cpsr & 0x1f) {
case ARM_CPU_MODE_USR:
return 0;
case ARM_CPU_MODE_HYP:
return 2;
case ARM_CPU_MODE_MON:
return 3;
default:
if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) {
/* If EL3 is 32-bit then all secure privileged modes run in
* EL3
*/
return 3;
}
return 1;
}
}
/**
* write_list_to_cpustate
* @cpu: ARMCPU
*
* For each register listed in the ARMCPU cpreg_indexes list, write
* its value from the cpreg_values list into the ARMCPUState structure.
* This updates TCG's working data structures from KVM data or
* from incoming migration state.
*
* Returns: true if all register values were updated correctly,
* false if some register was unknown or could not be written.
* Note that we do not stop early on failure -- we will attempt
* writing all registers in the list.
*/
bool write_list_to_cpustate(ARMCPU *cpu);
/**
* write_cpustate_to_list:
* @cpu: ARMCPU
* @kvm_sync: true if this is for syncing back to KVM
*
* For each register listed in the ARMCPU cpreg_indexes list, write
* its value from the ARMCPUState structure into the cpreg_values list.
* This is used to copy info from TCG's working data structures into
* KVM or for outbound migration.
*
* @kvm_sync is true if we are doing this in order to sync the
* register state back to KVM. In this case we will only update
* values in the list if the previous list->cpustate sync actually
* successfully wrote the CPU state. Otherwise we will keep the value
* that is in the list.
*
* Returns: true if all register values were read correctly,
* false if some register was unknown or could not be read.
* Note that we do not stop early on failure -- we will attempt
* reading all registers in the list.
*/
bool write_cpustate_to_list(ARMCPU *cpu, bool kvm_sync);
#define ARM_CPUID_TI915T 0x54029152
#define ARM_CPUID_TI925T 0x54029252
#define CPU_RESOLVING_TYPE TYPE_ARM_CPU
#define TYPE_ARM_HOST_CPU "host-" TYPE_ARM_CPU
/* ARM has the following "translation regimes" (as the ARM ARM calls them):
*
* If EL3 is 64-bit:
* + NonSecure EL1 & 0 stage 1
* + NonSecure EL1 & 0 stage 2
* + NonSecure EL2
* + NonSecure EL2 & 0 (ARMv8.1-VHE)
* + Secure EL1 & 0
* + Secure EL3
* If EL3 is 32-bit:
* + NonSecure PL1 & 0 stage 1
* + NonSecure PL1 & 0 stage 2
* + NonSecure PL2
* + Secure PL0
* + Secure PL1
* (reminder: for 32 bit EL3, Secure PL1 is *EL3*, not EL1.)
*
* For QEMU, an mmu_idx is not quite the same as a translation regime because:
* 1. we need to split the "EL1 & 0" and "EL2 & 0" regimes into two mmu_idxes,
* because they may differ in access permissions even if the VA->PA map is
* the same
* 2. we want to cache in our TLB the full VA->IPA->PA lookup for a stage 1+2
* translation, which means that we have one mmu_idx that deals with two
* concatenated translation regimes [this sort of combined s1+2 TLB is
* architecturally permitted]
* 3. we don't need to allocate an mmu_idx to translations that we won't be
* handling via the TLB. The only way to do a stage 1 translation without
* the immediate stage 2 translation is via the ATS or AT system insns,
* which can be slow-pathed and always do a page table walk.
* The only use of stage 2 translations is either as part of an s1+2
* lookup or when loading the descriptors during a stage 1 page table walk,
* and in both those cases we don't use the TLB.
* 4. we can also safely fold together the "32 bit EL3" and "64 bit EL3"
* translation regimes, because they map reasonably well to each other
* and they can't both be active at the same time.
* 5. we want to be able to use the TLB for accesses done as part of a
* stage1 page table walk, rather than having to walk the stage2 page
* table over and over.
* 6. we need separate EL1/EL2 mmu_idx for handling the Privileged Access
* Never (PAN) bit within PSTATE.
* 7. we fold together the secure and non-secure regimes for A-profile,
* because there are no banked system registers for aarch64, so the
* process of switching between secure and non-secure is
* already heavyweight.
*
* This gives us the following list of cases:
*
* EL0 EL1&0 stage 1+2 (aka NS PL0)
* EL1 EL1&0 stage 1+2 (aka NS PL1)
* EL1 EL1&0 stage 1+2 +PAN
* EL0 EL2&0
* EL2 EL2&0
* EL2 EL2&0 +PAN
* EL2 (aka NS PL2)
* EL3 (aka S PL1)
* Physical (NS & S)
* Stage2 (NS & S)
*
* for a total of 12 different mmu_idx.
*
* R profile CPUs have an MPU, but can use the same set of MMU indexes
* as A profile. They only need to distinguish EL0 and EL1 (and
* EL2 if we ever model a Cortex-R52).
*
* M profile CPUs are rather different as they do not have a true MMU.
* They have the following different MMU indexes:
* User
* Privileged
* User, execution priority negative (ie the MPU HFNMIENA bit may apply)
* Privileged, execution priority negative (ditto)
* If the CPU supports the v8M Security Extension then there are also:
* Secure User
* Secure Privileged
* Secure User, execution priority negative
* Secure Privileged, execution priority negative
*
* The ARMMMUIdx and the mmu index value used by the core QEMU TLB code
* are not quite the same -- different CPU types (most notably M profile
* vs A/R profile) would like to use MMU indexes with different semantics,
* but since we don't ever need to use all of those in a single CPU we
* can avoid having to set NB_MMU_MODES to "total number of A profile MMU
* modes + total number of M profile MMU modes". The lower bits of
* ARMMMUIdx are the core TLB mmu index, and the higher bits are always
* the same for any particular CPU.
* Variables of type ARMMUIdx are always full values, and the core
* index values are in variables of type 'int'.
*
* Our enumeration includes at the end some entries which are not "true"
* mmu_idx values in that they don't have corresponding TLBs and are only
* valid for doing slow path page table walks.
*
* The constant names here are patterned after the general style of the names
* of the AT/ATS operations.
* The values used are carefully arranged to make mmu_idx => EL lookup easy.
* For M profile we arrange them to have a bit for priv, a bit for negpri
* and a bit for secure.
*/
#define ARM_MMU_IDX_A 0x10 /* A profile */
#define ARM_MMU_IDX_NOTLB 0x20 /* does not have a TLB */
#define ARM_MMU_IDX_M 0x40 /* M profile */
/* Meanings of the bits for M profile mmu idx values */
#define ARM_MMU_IDX_M_PRIV 0x1
#define ARM_MMU_IDX_M_NEGPRI 0x2
#define ARM_MMU_IDX_M_S 0x4 /* Secure */
#define ARM_MMU_IDX_TYPE_MASK \
(ARM_MMU_IDX_A | ARM_MMU_IDX_M | ARM_MMU_IDX_NOTLB)
#define ARM_MMU_IDX_COREIDX_MASK 0xf
typedef enum ARMMMUIdx {
/*
* A-profile.
*/
ARMMMUIdx_E10_0 = 0 | ARM_MMU_IDX_A,
ARMMMUIdx_E20_0 = 1 | ARM_MMU_IDX_A,
ARMMMUIdx_E10_1 = 2 | ARM_MMU_IDX_A,
ARMMMUIdx_E20_2 = 3 | ARM_MMU_IDX_A,
ARMMMUIdx_E10_1_PAN = 4 | ARM_MMU_IDX_A,
ARMMMUIdx_E20_2_PAN = 5 | ARM_MMU_IDX_A,
ARMMMUIdx_E2 = 6 | ARM_MMU_IDX_A,
ARMMMUIdx_E3 = 7 | ARM_MMU_IDX_A,
/*
* Used for second stage of an S12 page table walk, or for descriptor
* loads during first stage of an S1 page table walk. Note that both
* are in use simultaneously for SecureEL2: the security state for
* the S2 ptw is selected by the NS bit from the S1 ptw.
*/
ARMMMUIdx_Stage2_S = 8 | ARM_MMU_IDX_A,
ARMMMUIdx_Stage2 = 9 | ARM_MMU_IDX_A,
/* TLBs with 1-1 mapping to the physical address spaces. */
ARMMMUIdx_Phys_S = 10 | ARM_MMU_IDX_A,
ARMMMUIdx_Phys_NS = 11 | ARM_MMU_IDX_A,
ARMMMUIdx_Phys_Root = 12 | ARM_MMU_IDX_A,
ARMMMUIdx_Phys_Realm = 13 | ARM_MMU_IDX_A,
/*
* These are not allocated TLBs and are used only for AT system
* instructions or for the first stage of an S12 page table walk.
*/
ARMMMUIdx_Stage1_E0 = 0 | ARM_MMU_IDX_NOTLB,
ARMMMUIdx_Stage1_E1 = 1 | ARM_MMU_IDX_NOTLB,
ARMMMUIdx_Stage1_E1_PAN = 2 | ARM_MMU_IDX_NOTLB,
/*
* M-profile.
*/
ARMMMUIdx_MUser = ARM_MMU_IDX_M,
ARMMMUIdx_MPriv = ARM_MMU_IDX_M | ARM_MMU_IDX_M_PRIV,
ARMMMUIdx_MUserNegPri = ARMMMUIdx_MUser | ARM_MMU_IDX_M_NEGPRI,
ARMMMUIdx_MPrivNegPri = ARMMMUIdx_MPriv | ARM_MMU_IDX_M_NEGPRI,
ARMMMUIdx_MSUser = ARMMMUIdx_MUser | ARM_MMU_IDX_M_S,
ARMMMUIdx_MSPriv = ARMMMUIdx_MPriv | ARM_MMU_IDX_M_S,
ARMMMUIdx_MSUserNegPri = ARMMMUIdx_MUserNegPri | ARM_MMU_IDX_M_S,
ARMMMUIdx_MSPrivNegPri = ARMMMUIdx_MPrivNegPri | ARM_MMU_IDX_M_S,
} ARMMMUIdx;
/*
* Bit macros for the core-mmu-index values for each index,
* for use when calling tlb_flush_by_mmuidx() and friends.
*/
#define TO_CORE_BIT(NAME) \
ARMMMUIdxBit_##NAME = 1 << (ARMMMUIdx_##NAME & ARM_MMU_IDX_COREIDX_MASK)
typedef enum ARMMMUIdxBit {
TO_CORE_BIT(E10_0),
TO_CORE_BIT(E20_0),
TO_CORE_BIT(E10_1),
TO_CORE_BIT(E10_1_PAN),
TO_CORE_BIT(E2),
TO_CORE_BIT(E20_2),
TO_CORE_BIT(E20_2_PAN),
TO_CORE_BIT(E3),
TO_CORE_BIT(Stage2),
TO_CORE_BIT(Stage2_S),
TO_CORE_BIT(MUser),
TO_CORE_BIT(MPriv),
TO_CORE_BIT(MUserNegPri),
TO_CORE_BIT(MPrivNegPri),
TO_CORE_BIT(MSUser),
TO_CORE_BIT(MSPriv),
TO_CORE_BIT(MSUserNegPri),
TO_CORE_BIT(MSPrivNegPri),
} ARMMMUIdxBit;
#undef TO_CORE_BIT
#define MMU_USER_IDX 0
/* Indexes used when registering address spaces with cpu_address_space_init */
typedef enum ARMASIdx {
ARMASIdx_NS = 0,
ARMASIdx_S = 1,
ARMASIdx_TagNS = 2,
ARMASIdx_TagS = 3,
} ARMASIdx;
static inline ARMMMUIdx arm_space_to_phys(ARMSecuritySpace space)
{
/* Assert the relative order of the physical mmu indexes. */
QEMU_BUILD_BUG_ON(ARMSS_Secure != 0);
QEMU_BUILD_BUG_ON(ARMMMUIdx_Phys_NS != ARMMMUIdx_Phys_S + ARMSS_NonSecure);
QEMU_BUILD_BUG_ON(ARMMMUIdx_Phys_Root != ARMMMUIdx_Phys_S + ARMSS_Root);
QEMU_BUILD_BUG_ON(ARMMMUIdx_Phys_Realm != ARMMMUIdx_Phys_S + ARMSS_Realm);
return ARMMMUIdx_Phys_S + space;
}
static inline ARMSecuritySpace arm_phys_to_space(ARMMMUIdx idx)
{
assert(idx >= ARMMMUIdx_Phys_S && idx <= ARMMMUIdx_Phys_Realm);
return idx - ARMMMUIdx_Phys_S;
}
static inline bool arm_v7m_csselr_razwi(ARMCPU *cpu)
{
/* If all the CLIDR.Ctypem bits are 0 there are no caches, and
* CSSELR is RAZ/WI.
*/
return (cpu->clidr & R_V7M_CLIDR_CTYPE_ALL_MASK) != 0;
}
static inline bool arm_sctlr_b(CPUARMState *env)
{
return
/* We need not implement SCTLR.ITD in user-mode emulation, so
* let linux-user ignore the fact that it conflicts with SCTLR_B.
* This lets people run BE32 binaries with "-cpu any".
*/
#ifndef CONFIG_USER_ONLY
!arm_feature(env, ARM_FEATURE_V7) &&
#endif
(env->cp15.sctlr_el[1] & SCTLR_B) != 0;
}
uint64_t arm_sctlr(CPUARMState *env, int el);
static inline bool arm_cpu_data_is_big_endian_a32(CPUARMState *env,
bool sctlr_b)
{
#ifdef CONFIG_USER_ONLY
/*
* In system mode, BE32 is modelled in line with the
* architecture (as word-invariant big-endianness), where loads
* and stores are done little endian but from addresses which
* are adjusted by XORing with the appropriate constant. So the
* endianness to use for the raw data access is not affected by
* SCTLR.B.
* In user mode, however, we model BE32 as byte-invariant
* big-endianness (because user-only code cannot tell the
* difference), and so we need to use a data access endianness
* that depends on SCTLR.B.
*/
if (sctlr_b) {
return true;
}
#endif
/* In 32bit endianness is determined by looking at CPSR's E bit */
return env->uncached_cpsr & CPSR_E;
}
static inline bool arm_cpu_data_is_big_endian_a64(int el, uint64_t sctlr)
{
return sctlr & (el ? SCTLR_EE : SCTLR_E0E);
}
/* Return true if the processor is in big-endian mode. */
static inline bool arm_cpu_data_is_big_endian(CPUARMState *env)
{
if (!is_a64(env)) {
return arm_cpu_data_is_big_endian_a32(env, arm_sctlr_b(env));
} else {
int cur_el = arm_current_el(env);
uint64_t sctlr = arm_sctlr(env, cur_el);
return arm_cpu_data_is_big_endian_a64(cur_el, sctlr);
}
}
#include "exec/cpu-all.h"
/*
* We have more than 32-bits worth of state per TB, so we split the data
* between tb->flags and tb->cs_base, which is otherwise unused for ARM.
* We collect these two parts in CPUARMTBFlags where they are named
* flags and flags2 respectively.
*
* The flags that are shared between all execution modes, TBFLAG_ANY,
* are stored in flags. The flags that are specific to a given mode
* are stores in flags2. Since cs_base is sized on the configured
* address size, flags2 always has 64-bits for A64, and a minimum of
* 32-bits for A32 and M32.
*
* The bits for 32-bit A-profile and M-profile partially overlap:
*
* 31 23 11 10 0
* +-------------+----------+----------------+
* | | | TBFLAG_A32 |
* | TBFLAG_AM32 | +-----+----------+
* | | |TBFLAG_M32|
* +-------------+----------------+----------+
* 31 23 6 5 0
*
* Unless otherwise noted, these bits are cached in env->hflags.
*/
FIELD(TBFLAG_ANY, AARCH64_STATE, 0, 1)
FIELD(TBFLAG_ANY, SS_ACTIVE, 1, 1)
FIELD(TBFLAG_ANY, PSTATE__SS, 2, 1) /* Not cached. */
FIELD(TBFLAG_ANY, BE_DATA, 3, 1)
FIELD(TBFLAG_ANY, MMUIDX, 4, 4)
/* Target EL if we take a floating-point-disabled exception */
FIELD(TBFLAG_ANY, FPEXC_EL, 8, 2)
/* Memory operations require alignment: SCTLR_ELx.A or CCR.UNALIGN_TRP */
FIELD(TBFLAG_ANY, ALIGN_MEM, 10, 1)
FIELD(TBFLAG_ANY, PSTATE__IL, 11, 1)
FIELD(TBFLAG_ANY, FGT_ACTIVE, 12, 1)
FIELD(TBFLAG_ANY, FGT_SVC, 13, 1)
/*
* Bit usage when in AArch32 state, both A- and M-profile.
*/
FIELD(TBFLAG_AM32, CONDEXEC, 24, 8) /* Not cached. */
FIELD(TBFLAG_AM32, THUMB, 23, 1) /* Not cached. */
/*
* Bit usage when in AArch32 state, for A-profile only.
*/
FIELD(TBFLAG_A32, VECLEN, 0, 3) /* Not cached. */
FIELD(TBFLAG_A32, VECSTRIDE, 3, 2) /* Not cached. */
/*
* We store the bottom two bits of the CPAR as TB flags and handle
* checks on the other bits at runtime. This shares the same bits as
* VECSTRIDE, which is OK as no XScale CPU has VFP.
* Not cached, because VECLEN+VECSTRIDE are not cached.
*/
FIELD(TBFLAG_A32, XSCALE_CPAR, 5, 2)
FIELD(TBFLAG_A32, VFPEN, 7, 1) /* Partially cached, minus FPEXC. */
FIELD(TBFLAG_A32, SCTLR__B, 8, 1) /* Cannot overlap with SCTLR_B */
FIELD(TBFLAG_A32, HSTR_ACTIVE, 9, 1)
/*
* Indicates whether cp register reads and writes by guest code should access
* the secure or nonsecure bank of banked registers; note that this is not
* the same thing as the current security state of the processor!
*/
FIELD(TBFLAG_A32, NS, 10, 1)
/*
* Indicates that SME Streaming mode is active, and SMCR_ELx.FA64 is not.
* This requires an SME trap from AArch32 mode when using NEON.
*/
FIELD(TBFLAG_A32, SME_TRAP_NONSTREAMING, 11, 1)
/*
* Bit usage when in AArch32 state, for M-profile only.
*/
/* Handler (ie not Thread) mode */
FIELD(TBFLAG_M32, HANDLER, 0, 1)
/* Whether we should generate stack-limit checks */
FIELD(TBFLAG_M32, STACKCHECK, 1, 1)
/* Set if FPCCR.LSPACT is set */
FIELD(TBFLAG_M32, LSPACT, 2, 1) /* Not cached. */
/* Set if we must create a new FP context */
FIELD(TBFLAG_M32, NEW_FP_CTXT_NEEDED, 3, 1) /* Not cached. */
/* Set if FPCCR.S does not match current security state */
FIELD(TBFLAG_M32, FPCCR_S_WRONG, 4, 1) /* Not cached. */
/* Set if MVE insns are definitely not predicated by VPR or LTPSIZE */
FIELD(TBFLAG_M32, MVE_NO_PRED, 5, 1) /* Not cached. */
/* Set if in secure mode */
FIELD(TBFLAG_M32, SECURE, 6, 1)
/*
* Bit usage when in AArch64 state
*/
FIELD(TBFLAG_A64, TBII, 0, 2)
FIELD(TBFLAG_A64, SVEEXC_EL, 2, 2)
/* The current vector length, either NVL or SVL. */
FIELD(TBFLAG_A64, VL, 4, 4)
FIELD(TBFLAG_A64, PAUTH_ACTIVE, 8, 1)
FIELD(TBFLAG_A64, BT, 9, 1)
FIELD(TBFLAG_A64, BTYPE, 10, 2) /* Not cached. */
FIELD(TBFLAG_A64, TBID, 12, 2)
FIELD(TBFLAG_A64, UNPRIV, 14, 1)
FIELD(TBFLAG_A64, ATA, 15, 1)
FIELD(TBFLAG_A64, TCMA, 16, 2)
FIELD(TBFLAG_A64, MTE_ACTIVE, 18, 1)
FIELD(TBFLAG_A64, MTE0_ACTIVE, 19, 1)
FIELD(TBFLAG_A64, SMEEXC_EL, 20, 2)
FIELD(TBFLAG_A64, PSTATE_SM, 22, 1)
FIELD(TBFLAG_A64, PSTATE_ZA, 23, 1)
FIELD(TBFLAG_A64, SVL, 24, 4)
/* Indicates that SME Streaming mode is active, and SMCR_ELx.FA64 is not. */
FIELD(TBFLAG_A64, SME_TRAP_NONSTREAMING, 28, 1)
FIELD(TBFLAG_A64, TRAP_ERET, 29, 1)
FIELD(TBFLAG_A64, NAA, 30, 1)
FIELD(TBFLAG_A64, ATA0, 31, 1)
FIELD(TBFLAG_A64, NV, 32, 1)
FIELD(TBFLAG_A64, NV1, 33, 1)
FIELD(TBFLAG_A64, NV2, 34, 1)
/* Set if FEAT_NV2 RAM accesses use the EL2&0 translation regime */
FIELD(TBFLAG_A64, NV2_MEM_E20, 35, 1)
/* Set if FEAT_NV2 RAM accesses are big-endian */
FIELD(TBFLAG_A64, NV2_MEM_BE, 36, 1)
/*
* Helpers for using the above. Note that only the A64 accessors use
* FIELD_DP64() and FIELD_EX64(), because in the other cases the flags
* word either is or might be 32 bits only.
*/
#define DP_TBFLAG_ANY(DST, WHICH, VAL) \
(DST.flags = FIELD_DP32(DST.flags, TBFLAG_ANY, WHICH, VAL))
#define DP_TBFLAG_A64(DST, WHICH, VAL) \
(DST.flags2 = FIELD_DP64(DST.flags2, TBFLAG_A64, WHICH, VAL))
#define DP_TBFLAG_A32(DST, WHICH, VAL) \
(DST.flags2 = FIELD_DP32(DST.flags2, TBFLAG_A32, WHICH, VAL))
#define DP_TBFLAG_M32(DST, WHICH, VAL) \
(DST.flags2 = FIELD_DP32(DST.flags2, TBFLAG_M32, WHICH, VAL))
#define DP_TBFLAG_AM32(DST, WHICH, VAL) \
(DST.flags2 = FIELD_DP32(DST.flags2, TBFLAG_AM32, WHICH, VAL))
#define EX_TBFLAG_ANY(IN, WHICH) FIELD_EX32(IN.flags, TBFLAG_ANY, WHICH)
#define EX_TBFLAG_A64(IN, WHICH) FIELD_EX64(IN.flags2, TBFLAG_A64, WHICH)
#define EX_TBFLAG_A32(IN, WHICH) FIELD_EX32(IN.flags2, TBFLAG_A32, WHICH)
#define EX_TBFLAG_M32(IN, WHICH) FIELD_EX32(IN.flags2, TBFLAG_M32, WHICH)
#define EX_TBFLAG_AM32(IN, WHICH) FIELD_EX32(IN.flags2, TBFLAG_AM32, WHICH)
/**
* sve_vq
* @env: the cpu context
*
* Return the VL cached within env->hflags, in units of quadwords.
*/
static inline int sve_vq(CPUARMState *env)
{
return EX_TBFLAG_A64(env->hflags, VL) + 1;
}
/**
* sme_vq
* @env: the cpu context
*
* Return the SVL cached within env->hflags, in units of quadwords.
*/
static inline int sme_vq(CPUARMState *env)
{
return EX_TBFLAG_A64(env->hflags, SVL) + 1;
}
static inline bool bswap_code(bool sctlr_b)
{
#ifdef CONFIG_USER_ONLY
/* BE8 (SCTLR.B = 0, TARGET_BIG_ENDIAN = 1) is mixed endian.
* The invalid combination SCTLR.B=1/CPSR.E=1/TARGET_BIG_ENDIAN=0
* would also end up as a mixed-endian mode with BE code, LE data.
*/
return TARGET_BIG_ENDIAN ^ sctlr_b;
#else
/* All code access in ARM is little endian, and there are no loaders
* doing swaps that need to be reversed
*/
return 0;
#endif
}
#ifdef CONFIG_USER_ONLY
static inline bool arm_cpu_bswap_data(CPUARMState *env)
{
return TARGET_BIG_ENDIAN ^ arm_cpu_data_is_big_endian(env);
}
#endif
void cpu_get_tb_cpu_state(CPUARMState *env, vaddr *pc,
uint64_t *cs_base, uint32_t *flags);
enum {
QEMU_PSCI_CONDUIT_DISABLED = 0,
QEMU_PSCI_CONDUIT_SMC = 1,
QEMU_PSCI_CONDUIT_HVC = 2,
};
#ifndef CONFIG_USER_ONLY
/* Return the address space index to use for a memory access */
static inline int arm_asidx_from_attrs(CPUState *cs, MemTxAttrs attrs)
{
return attrs.secure ? ARMASIdx_S : ARMASIdx_NS;
}
/* Return the AddressSpace to use for a memory access
* (which depends on whether the access is S or NS, and whether
* the board gave us a separate AddressSpace for S accesses).
*/
static inline AddressSpace *arm_addressspace(CPUState *cs, MemTxAttrs attrs)
{
return cpu_get_address_space(cs, arm_asidx_from_attrs(cs, attrs));
}
#endif
/**
* arm_register_pre_el_change_hook:
* Register a hook function which will be called immediately before this
* CPU changes exception level or mode. The hook function will be
* passed a pointer to the ARMCPU and the opaque data pointer passed
* to this function when the hook was registered.
*
* Note that if a pre-change hook is called, any registered post-change hooks
* are guaranteed to subsequently be called.
*/
void arm_register_pre_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook,
void *opaque);
/**
* arm_register_el_change_hook:
* Register a hook function which will be called immediately after this
* CPU changes exception level or mode. The hook function will be
* passed a pointer to the ARMCPU and the opaque data pointer passed
* to this function when the hook was registered.
*
* Note that any registered hooks registered here are guaranteed to be called
* if pre-change hooks have been.
*/
void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, void
*opaque);
/**
* arm_rebuild_hflags:
* Rebuild the cached TBFLAGS for arbitrary changed processor state.
*/
void arm_rebuild_hflags(CPUARMState *env);
/**
* aa32_vfp_dreg:
* Return a pointer to the Dn register within env in 32-bit mode.
*/
static inline uint64_t *aa32_vfp_dreg(CPUARMState *env, unsigned regno)
{
return &env->vfp.zregs[regno >> 1].d[regno & 1];
}
/**
* aa32_vfp_qreg:
* Return a pointer to the Qn register within env in 32-bit mode.
*/
static inline uint64_t *aa32_vfp_qreg(CPUARMState *env, unsigned regno)
{
return &env->vfp.zregs[regno].d[0];
}
/**
* aa64_vfp_qreg:
* Return a pointer to the Qn register within env in 64-bit mode.
*/
static inline uint64_t *aa64_vfp_qreg(CPUARMState *env, unsigned regno)
{
return &env->vfp.zregs[regno].d[0];
}
/* Shared between translate-sve.c and sve_helper.c. */
extern const uint64_t pred_esz_masks[5];
/*
* AArch64 usage of the PAGE_TARGET_* bits for linux-user.
* Note that with the Linux kernel, PROT_MTE may not be cleared by mprotect
* mprotect but PROT_BTI may be cleared. C.f. the kernel's VM_ARCH_CLEAR.
*/
#define PAGE_BTI PAGE_TARGET_1
#define PAGE_MTE PAGE_TARGET_2
#define PAGE_TARGET_STICKY PAGE_MTE
/* We associate one allocation tag per 16 bytes, the minimum. */
#define LOG2_TAG_GRANULE 4
#define TAG_GRANULE (1 << LOG2_TAG_GRANULE)
#ifdef CONFIG_USER_ONLY
#define TARGET_PAGE_DATA_SIZE (TARGET_PAGE_SIZE >> (LOG2_TAG_GRANULE + 1))
#endif
#ifdef TARGET_TAGGED_ADDRESSES
/**
* cpu_untagged_addr:
* @cs: CPU context
* @x: tagged address
*
* Remove any address tag from @x. This is explicitly related to the
* linux syscall TIF_TAGGED_ADDR setting, not TBI in general.
*
* There should be a better place to put this, but we need this in
* include/exec/cpu_ldst.h, and not some place linux-user specific.
*/
static inline target_ulong cpu_untagged_addr(CPUState *cs, target_ulong x)
{
ARMCPU *cpu = ARM_CPU(cs);
if (cpu->env.tagged_addr_enable) {
/*
* TBI is enabled for userspace but not kernelspace addresses.
* Only clear the tag if bit 55 is clear.
*/
x &= sextract64(x, 0, 56);
}
return x;
}
#endif
#endif