| /* |
| * Xilinx Display Port |
| * |
| * Copyright (C) 2015 : GreenSocs Ltd |
| * http://www.greensocs.com/ , email: info@greensocs.com |
| * |
| * Developed by : |
| * Frederic Konrad <fred.konrad@greensocs.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation, either version 2 of the License, or |
| * (at your option)any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| * |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "qemu/error-report.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| #include "hw/display/xlnx_dp.h" |
| #include "hw/irq.h" |
| #include "migration/vmstate.h" |
| |
| #ifndef DEBUG_DP |
| #define DEBUG_DP 0 |
| #endif |
| |
| #define DPRINTF(fmt, ...) do { \ |
| if (DEBUG_DP) { \ |
| qemu_log("xlnx_dp: " fmt , ## __VA_ARGS__); \ |
| } \ |
| } while (0) |
| |
| /* |
| * Register offset for DP. |
| */ |
| #define DP_LINK_BW_SET (0x0000 >> 2) |
| #define DP_LANE_COUNT_SET (0x0004 >> 2) |
| #define DP_ENHANCED_FRAME_EN (0x0008 >> 2) |
| #define DP_TRAINING_PATTERN_SET (0x000C >> 2) |
| #define DP_LINK_QUAL_PATTERN_SET (0x0010 >> 2) |
| #define DP_SCRAMBLING_DISABLE (0x0014 >> 2) |
| #define DP_DOWNSPREAD_CTRL (0x0018 >> 2) |
| #define DP_SOFTWARE_RESET (0x001C >> 2) |
| #define DP_TRANSMITTER_ENABLE (0x0080 >> 2) |
| #define DP_MAIN_STREAM_ENABLE (0x0084 >> 2) |
| #define DP_FORCE_SCRAMBLER_RESET (0x00C0 >> 2) |
| #define DP_VERSION_REGISTER (0x00F8 >> 2) |
| #define DP_CORE_ID (0x00FC >> 2) |
| |
| #define DP_AUX_COMMAND_REGISTER (0x0100 >> 2) |
| #define AUX_ADDR_ONLY_MASK (0x1000) |
| #define AUX_COMMAND_MASK (0x0F00) |
| #define AUX_COMMAND_SHIFT (8) |
| #define AUX_COMMAND_NBYTES (0x000F) |
| |
| #define DP_AUX_WRITE_FIFO (0x0104 >> 2) |
| #define DP_AUX_ADDRESS (0x0108 >> 2) |
| #define DP_AUX_CLOCK_DIVIDER (0x010C >> 2) |
| #define DP_TX_USER_FIFO_OVERFLOW (0x0110 >> 2) |
| #define DP_INTERRUPT_SIGNAL_STATE (0x0130 >> 2) |
| #define DP_AUX_REPLY_DATA (0x0134 >> 2) |
| #define DP_AUX_REPLY_CODE (0x0138 >> 2) |
| #define DP_AUX_REPLY_COUNT (0x013C >> 2) |
| #define DP_REPLY_DATA_COUNT (0x0148 >> 2) |
| #define DP_REPLY_STATUS (0x014C >> 2) |
| #define DP_HPD_DURATION (0x0150 >> 2) |
| #define DP_MAIN_STREAM_HTOTAL (0x0180 >> 2) |
| #define DP_MAIN_STREAM_VTOTAL (0x0184 >> 2) |
| #define DP_MAIN_STREAM_POLARITY (0x0188 >> 2) |
| #define DP_MAIN_STREAM_HSWIDTH (0x018C >> 2) |
| #define DP_MAIN_STREAM_VSWIDTH (0x0190 >> 2) |
| #define DP_MAIN_STREAM_HRES (0x0194 >> 2) |
| #define DP_MAIN_STREAM_VRES (0x0198 >> 2) |
| #define DP_MAIN_STREAM_HSTART (0x019C >> 2) |
| #define DP_MAIN_STREAM_VSTART (0x01A0 >> 2) |
| #define DP_MAIN_STREAM_MISC0 (0x01A4 >> 2) |
| #define DP_MAIN_STREAM_MISC1 (0x01A8 >> 2) |
| #define DP_MAIN_STREAM_M_VID (0x01AC >> 2) |
| #define DP_MSA_TRANSFER_UNIT_SIZE (0x01B0 >> 2) |
| #define DP_MAIN_STREAM_N_VID (0x01B4 >> 2) |
| #define DP_USER_DATA_COUNT_PER_LANE (0x01BC >> 2) |
| #define DP_MIN_BYTES_PER_TU (0x01C4 >> 2) |
| #define DP_FRAC_BYTES_PER_TU (0x01C8 >> 2) |
| #define DP_INIT_WAIT (0x01CC >> 2) |
| #define DP_PHY_RESET (0x0200 >> 2) |
| #define DP_PHY_VOLTAGE_DIFF_LANE_0 (0x0220 >> 2) |
| #define DP_PHY_VOLTAGE_DIFF_LANE_1 (0x0224 >> 2) |
| #define DP_TRANSMIT_PRBS7 (0x0230 >> 2) |
| #define DP_PHY_CLOCK_SELECT (0x0234 >> 2) |
| #define DP_TX_PHY_POWER_DOWN (0x0238 >> 2) |
| #define DP_PHY_PRECURSOR_LANE_0 (0x023C >> 2) |
| #define DP_PHY_PRECURSOR_LANE_1 (0x0240 >> 2) |
| #define DP_PHY_POSTCURSOR_LANE_0 (0x024C >> 2) |
| #define DP_PHY_POSTCURSOR_LANE_1 (0x0250 >> 2) |
| #define DP_PHY_STATUS (0x0280 >> 2) |
| |
| #define DP_TX_AUDIO_CONTROL (0x0300 >> 2) |
| #define DP_TX_AUD_CTRL (1) |
| |
| #define DP_TX_AUDIO_CHANNELS (0x0304 >> 2) |
| #define DP_TX_AUDIO_INFO_DATA(n) ((0x0308 + 4 * n) >> 2) |
| #define DP_TX_M_AUD (0x0328 >> 2) |
| #define DP_TX_N_AUD (0x032C >> 2) |
| #define DP_TX_AUDIO_EXT_DATA(n) ((0x0330 + 4 * n) >> 2) |
| #define DP_INT_STATUS (0x03A0 >> 2) |
| #define DP_INT_VBLNK_START (1 << 13) |
| #define DP_INT_MASK (0x03A4 >> 2) |
| #define DP_INT_EN (0x03A8 >> 2) |
| #define DP_INT_DS (0x03AC >> 2) |
| |
| /* |
| * Registers offset for Audio Video Buffer configuration. |
| */ |
| #define V_BLEND_OFFSET (0xA000) |
| #define V_BLEND_BG_CLR_0 (0x0000 >> 2) |
| #define V_BLEND_BG_CLR_1 (0x0004 >> 2) |
| #define V_BLEND_BG_CLR_2 (0x0008 >> 2) |
| #define V_BLEND_SET_GLOBAL_ALPHA_REG (0x000C >> 2) |
| #define V_BLEND_OUTPUT_VID_FORMAT (0x0014 >> 2) |
| #define V_BLEND_LAYER0_CONTROL (0x0018 >> 2) |
| #define V_BLEND_LAYER1_CONTROL (0x001C >> 2) |
| |
| #define V_BLEND_RGB2YCBCR_COEFF(n) ((0x0020 + 4 * n) >> 2) |
| #define V_BLEND_IN1CSC_COEFF(n) ((0x0044 + 4 * n) >> 2) |
| |
| #define V_BLEND_LUMA_IN1CSC_OFFSET (0x0068 >> 2) |
| #define V_BLEND_CR_IN1CSC_OFFSET (0x006C >> 2) |
| #define V_BLEND_CB_IN1CSC_OFFSET (0x0070 >> 2) |
| #define V_BLEND_LUMA_OUTCSC_OFFSET (0x0074 >> 2) |
| #define V_BLEND_CR_OUTCSC_OFFSET (0x0078 >> 2) |
| #define V_BLEND_CB_OUTCSC_OFFSET (0x007C >> 2) |
| |
| #define V_BLEND_IN2CSC_COEFF(n) ((0x0080 + 4 * n) >> 2) |
| |
| #define V_BLEND_LUMA_IN2CSC_OFFSET (0x00A4 >> 2) |
| #define V_BLEND_CR_IN2CSC_OFFSET (0x00A8 >> 2) |
| #define V_BLEND_CB_IN2CSC_OFFSET (0x00AC >> 2) |
| #define V_BLEND_CHROMA_KEY_ENABLE (0x01D0 >> 2) |
| #define V_BLEND_CHROMA_KEY_COMP1 (0x01D4 >> 2) |
| #define V_BLEND_CHROMA_KEY_COMP2 (0x01D8 >> 2) |
| #define V_BLEND_CHROMA_KEY_COMP3 (0x01DC >> 2) |
| |
| /* |
| * Registers offset for Audio Video Buffer configuration. |
| */ |
| #define AV_BUF_MANAGER_OFFSET (0xB000) |
| #define AV_BUF_FORMAT (0x0000 >> 2) |
| #define AV_BUF_NON_LIVE_LATENCY (0x0008 >> 2) |
| #define AV_CHBUF0 (0x0010 >> 2) |
| #define AV_CHBUF1 (0x0014 >> 2) |
| #define AV_CHBUF2 (0x0018 >> 2) |
| #define AV_CHBUF3 (0x001C >> 2) |
| #define AV_CHBUF4 (0x0020 >> 2) |
| #define AV_CHBUF5 (0x0024 >> 2) |
| #define AV_BUF_STC_CONTROL (0x002C >> 2) |
| #define AV_BUF_STC_INIT_VALUE0 (0x0030 >> 2) |
| #define AV_BUF_STC_INIT_VALUE1 (0x0034 >> 2) |
| #define AV_BUF_STC_ADJ (0x0038 >> 2) |
| #define AV_BUF_STC_VIDEO_VSYNC_TS_REG0 (0x003C >> 2) |
| #define AV_BUF_STC_VIDEO_VSYNC_TS_REG1 (0x0040 >> 2) |
| #define AV_BUF_STC_EXT_VSYNC_TS_REG0 (0x0044 >> 2) |
| #define AV_BUF_STC_EXT_VSYNC_TS_REG1 (0x0048 >> 2) |
| #define AV_BUF_STC_CUSTOM_EVENT_TS_REG0 (0x004C >> 2) |
| #define AV_BUF_STC_CUSTOM_EVENT_TS_REG1 (0x0050 >> 2) |
| #define AV_BUF_STC_CUSTOM_EVENT2_TS_REG0 (0x0054 >> 2) |
| #define AV_BUF_STC_CUSTOM_EVENT2_TS_REG1 (0x0058 >> 2) |
| #define AV_BUF_STC_SNAPSHOT0 (0x0060 >> 2) |
| #define AV_BUF_STC_SNAPSHOT1 (0x0064 >> 2) |
| #define AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT (0x0070 >> 2) |
| #define AV_BUF_HCOUNT_VCOUNT_INT0 (0x0074 >> 2) |
| #define AV_BUF_HCOUNT_VCOUNT_INT1 (0x0078 >> 2) |
| #define AV_BUF_DITHER_CONFIG (0x007C >> 2) |
| #define AV_BUF_DITHER_CONFIG_MAX (0x008C >> 2) |
| #define AV_BUF_DITHER_CONFIG_MIN (0x0090 >> 2) |
| #define AV_BUF_PATTERN_GEN_SELECT (0x0100 >> 2) |
| #define AV_BUF_AUD_VID_CLK_SOURCE (0x0120 >> 2) |
| #define AV_BUF_SRST_REG (0x0124 >> 2) |
| #define AV_BUF_AUDIO_RDY_INTERVAL (0x0128 >> 2) |
| #define AV_BUF_AUDIO_CH_CONFIG (0x012C >> 2) |
| |
| #define AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(n)((0x0200 + 4 * n) >> 2) |
| |
| #define AV_BUF_VIDEO_COMP_SCALE_FACTOR(n) ((0x020C + 4 * n) >> 2) |
| |
| #define AV_BUF_LIVE_VIDEO_COMP_SF(n) ((0x0218 + 4 * n) >> 2) |
| |
| #define AV_BUF_LIVE_VID_CONFIG (0x0224 >> 2) |
| |
| #define AV_BUF_LIVE_GFX_COMP_SF(n) ((0x0228 + 4 * n) >> 2) |
| |
| #define AV_BUF_LIVE_GFX_CONFIG (0x0234 >> 2) |
| |
| #define AUDIO_MIXER_REGISTER_OFFSET (0xC000) |
| #define AUDIO_MIXER_VOLUME_CONTROL (0x0000 >> 2) |
| #define AUDIO_MIXER_META_DATA (0x0004 >> 2) |
| #define AUD_CH_STATUS_REG(n) ((0x0008 + 4 * n) >> 2) |
| #define AUD_CH_A_DATA_REG(n) ((0x0020 + 4 * n) >> 2) |
| #define AUD_CH_B_DATA_REG(n) ((0x0038 + 4 * n) >> 2) |
| |
| #define DP_AUDIO_DMA_CHANNEL(n) (4 + n) |
| #define DP_GRAPHIC_DMA_CHANNEL (3) |
| #define DP_VIDEO_DMA_CHANNEL (0) |
| |
| enum DPGraphicFmt { |
| DP_GRAPHIC_RGBA8888 = 0 << 8, |
| DP_GRAPHIC_ABGR8888 = 1 << 8, |
| DP_GRAPHIC_RGB888 = 2 << 8, |
| DP_GRAPHIC_BGR888 = 3 << 8, |
| DP_GRAPHIC_RGBA5551 = 4 << 8, |
| DP_GRAPHIC_RGBA4444 = 5 << 8, |
| DP_GRAPHIC_RGB565 = 6 << 8, |
| DP_GRAPHIC_8BPP = 7 << 8, |
| DP_GRAPHIC_4BPP = 8 << 8, |
| DP_GRAPHIC_2BPP = 9 << 8, |
| DP_GRAPHIC_1BPP = 10 << 8, |
| DP_GRAPHIC_MASK = 0xF << 8 |
| }; |
| |
| enum DPVideoFmt { |
| DP_NL_VID_CB_Y0_CR_Y1 = 0, |
| DP_NL_VID_CR_Y0_CB_Y1 = 1, |
| DP_NL_VID_Y0_CR_Y1_CB = 2, |
| DP_NL_VID_Y0_CB_Y1_CR = 3, |
| DP_NL_VID_YV16 = 4, |
| DP_NL_VID_YV24 = 5, |
| DP_NL_VID_YV16CL = 6, |
| DP_NL_VID_MONO = 7, |
| DP_NL_VID_YV16CL2 = 8, |
| DP_NL_VID_YUV444 = 9, |
| DP_NL_VID_RGB888 = 10, |
| DP_NL_VID_RGBA8880 = 11, |
| DP_NL_VID_RGB888_10BPC = 12, |
| DP_NL_VID_YUV444_10BPC = 13, |
| DP_NL_VID_YV16CL2_10BPC = 14, |
| DP_NL_VID_YV16CL_10BPC = 15, |
| DP_NL_VID_YV16_10BPC = 16, |
| DP_NL_VID_YV24_10BPC = 17, |
| DP_NL_VID_Y_ONLY_10BPC = 18, |
| DP_NL_VID_YV16_420 = 19, |
| DP_NL_VID_YV16CL_420 = 20, |
| DP_NL_VID_YV16CL2_420 = 21, |
| DP_NL_VID_YV16_420_10BPC = 22, |
| DP_NL_VID_YV16CL_420_10BPC = 23, |
| DP_NL_VID_YV16CL2_420_10BPC = 24, |
| DP_NL_VID_FMT_MASK = 0x1F |
| }; |
| |
| typedef enum DPGraphicFmt DPGraphicFmt; |
| typedef enum DPVideoFmt DPVideoFmt; |
| |
| static const VMStateDescription vmstate_dp = { |
| .name = TYPE_XLNX_DP, |
| .version_id = 2, |
| .fields = (const VMStateField[]){ |
| VMSTATE_UINT32_ARRAY(core_registers, XlnxDPState, |
| DP_CORE_REG_ARRAY_SIZE), |
| VMSTATE_UINT32_ARRAY(avbufm_registers, XlnxDPState, |
| DP_AVBUF_REG_ARRAY_SIZE), |
| VMSTATE_UINT32_ARRAY(vblend_registers, XlnxDPState, |
| DP_VBLEND_REG_ARRAY_SIZE), |
| VMSTATE_UINT32_ARRAY(audio_registers, XlnxDPState, |
| DP_AUDIO_REG_ARRAY_SIZE), |
| VMSTATE_PTIMER(vblank, XlnxDPState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| #define DP_VBLANK_PTIMER_POLICY (PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | \ |
| PTIMER_POLICY_CONTINUOUS_TRIGGER | \ |
| PTIMER_POLICY_NO_IMMEDIATE_TRIGGER) |
| |
| static void xlnx_dp_update_irq(XlnxDPState *s); |
| |
| static uint64_t xlnx_dp_audio_read(void *opaque, hwaddr offset, unsigned size) |
| { |
| XlnxDPState *s = XLNX_DP(opaque); |
| |
| offset = offset >> 2; |
| return s->audio_registers[offset]; |
| } |
| |
| static void xlnx_dp_audio_write(void *opaque, hwaddr offset, uint64_t value, |
| unsigned size) |
| { |
| XlnxDPState *s = XLNX_DP(opaque); |
| |
| offset = offset >> 2; |
| |
| switch (offset) { |
| case AUDIO_MIXER_META_DATA: |
| s->audio_registers[offset] = value & 0x00000001; |
| break; |
| default: |
| s->audio_registers[offset] = value; |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps audio_ops = { |
| .read = xlnx_dp_audio_read, |
| .write = xlnx_dp_audio_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static inline uint32_t xlnx_dp_audio_get_volume(XlnxDPState *s, |
| uint8_t channel) |
| { |
| switch (channel) { |
| case 0: |
| return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 0, 16); |
| case 1: |
| return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 16, |
| 16); |
| default: |
| return 0; |
| } |
| } |
| |
| static inline void xlnx_dp_audio_activate(XlnxDPState *s) |
| { |
| bool activated = ((s->core_registers[DP_TX_AUDIO_CONTROL] |
| & DP_TX_AUD_CTRL) != 0); |
| AUD_set_active_out(s->amixer_output_stream, activated); |
| xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(0), |
| &s->audio_buffer_0); |
| xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(1), |
| &s->audio_buffer_1); |
| } |
| |
| static inline void xlnx_dp_audio_mix_buffer(XlnxDPState *s) |
| { |
| /* |
| * Audio packets are signed and have this shape: |
| * | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | |
| * | R3 | L3 | R2 | L2 | R1 | L1 | R0 | L0 | |
| * |
| * Output audio is 16bits saturated. |
| */ |
| int i; |
| |
| if ((s->audio_data_available[0]) && (xlnx_dp_audio_get_volume(s, 0))) { |
| for (i = 0; i < s->audio_data_available[0] / 2; i++) { |
| s->temp_buffer[i] = (int64_t)(s->audio_buffer_0[i]) |
| * xlnx_dp_audio_get_volume(s, 0) / 8192; |
| } |
| s->byte_left = s->audio_data_available[0]; |
| } else { |
| memset(s->temp_buffer, 0, s->audio_data_available[1] / 2); |
| } |
| |
| if ((s->audio_data_available[1]) && (xlnx_dp_audio_get_volume(s, 1))) { |
| if ((s->audio_data_available[0] == 0) |
| || (s->audio_data_available[1] == s->audio_data_available[0])) { |
| for (i = 0; i < s->audio_data_available[1] / 2; i++) { |
| s->temp_buffer[i] += (int64_t)(s->audio_buffer_1[i]) |
| * xlnx_dp_audio_get_volume(s, 1) / 8192; |
| } |
| s->byte_left = s->audio_data_available[1]; |
| } |
| } |
| |
| for (i = 0; i < s->byte_left / 2; i++) { |
| s->out_buffer[i] = MAX(-32767, MIN(s->temp_buffer[i], 32767)); |
| } |
| |
| s->data_ptr = 0; |
| } |
| |
| static void xlnx_dp_audio_callback(void *opaque, int avail) |
| { |
| /* |
| * Get the individual left and right audio streams from the DPDMA, |
| * and fill the output buffer with the combined stereo audio data |
| * adjusted by the volume controls. |
| * QEMU's audio subsystem will call this callback repeatedly; |
| * we return the data from the output buffer until it is emptied, |
| * and then we will read data from the DPDMA again. |
| */ |
| XlnxDPState *s = XLNX_DP(opaque); |
| size_t written = 0; |
| |
| if (s->byte_left == 0) { |
| s->audio_data_available[0] = xlnx_dpdma_start_operation(s->dpdma, 4, |
| true); |
| s->audio_data_available[1] = xlnx_dpdma_start_operation(s->dpdma, 5, |
| true); |
| xlnx_dp_audio_mix_buffer(s); |
| } |
| |
| /* Send the buffer through the audio. */ |
| if (s->byte_left <= MAX_QEMU_BUFFER_SIZE) { |
| if (s->byte_left != 0) { |
| written = AUD_write(s->amixer_output_stream, |
| &s->out_buffer[s->data_ptr], s->byte_left); |
| } else { |
| int len_to_copy; |
| /* |
| * There is nothing to play.. We don't have any data! Fill the |
| * buffer with zero's and send it. |
| */ |
| written = 0; |
| while (avail) { |
| len_to_copy = MIN(AUD_CHBUF_MAX_DEPTH, avail); |
| memset(s->out_buffer, 0, len_to_copy); |
| avail -= AUD_write(s->amixer_output_stream, s->out_buffer, |
| len_to_copy); |
| } |
| } |
| } else { |
| written = AUD_write(s->amixer_output_stream, |
| &s->out_buffer[s->data_ptr], MAX_QEMU_BUFFER_SIZE); |
| } |
| s->byte_left -= written; |
| s->data_ptr += written; |
| } |
| |
| /* |
| * AUX channel related function. |
| */ |
| static void xlnx_dp_aux_clear_rx_fifo(XlnxDPState *s) |
| { |
| fifo8_reset(&s->rx_fifo); |
| } |
| |
| static void xlnx_dp_aux_push_rx_fifo(XlnxDPState *s, uint8_t *buf, size_t len) |
| { |
| DPRINTF("Push %u data in rx_fifo\n", (unsigned)len); |
| fifo8_push_all(&s->rx_fifo, buf, len); |
| } |
| |
| static uint8_t xlnx_dp_aux_pop_rx_fifo(XlnxDPState *s) |
| { |
| uint8_t ret; |
| |
| if (fifo8_is_empty(&s->rx_fifo)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: Reading empty RX_FIFO\n", |
| __func__); |
| /* |
| * The datasheet is not clear about the reset value, it seems |
| * to be unspecified. We choose to return '0'. |
| */ |
| ret = 0; |
| } else { |
| ret = fifo8_pop(&s->rx_fifo); |
| DPRINTF("pop 0x%" PRIX8 " from rx_fifo.\n", ret); |
| } |
| return ret; |
| } |
| |
| static void xlnx_dp_aux_clear_tx_fifo(XlnxDPState *s) |
| { |
| fifo8_reset(&s->tx_fifo); |
| } |
| |
| static void xlnx_dp_aux_push_tx_fifo(XlnxDPState *s, uint8_t *buf, size_t len) |
| { |
| DPRINTF("Push %u data in tx_fifo\n", (unsigned)len); |
| fifo8_push_all(&s->tx_fifo, buf, len); |
| } |
| |
| static uint8_t xlnx_dp_aux_pop_tx_fifo(XlnxDPState *s) |
| { |
| uint8_t ret; |
| |
| if (fifo8_is_empty(&s->tx_fifo)) { |
| error_report("%s: TX_FIFO underflow", __func__); |
| abort(); |
| } |
| ret = fifo8_pop(&s->tx_fifo); |
| DPRINTF("pop 0x%2.2X from tx_fifo.\n", ret); |
| return ret; |
| } |
| |
| static uint32_t xlnx_dp_aux_get_address(XlnxDPState *s) |
| { |
| return s->core_registers[DP_AUX_ADDRESS]; |
| } |
| |
| /* |
| * Get command from the register. |
| */ |
| static void xlnx_dp_aux_set_command(XlnxDPState *s, uint32_t value) |
| { |
| bool address_only = (value & AUX_ADDR_ONLY_MASK) != 0; |
| AUXCommand cmd = (value & AUX_COMMAND_MASK) >> AUX_COMMAND_SHIFT; |
| uint8_t nbytes = (value & AUX_COMMAND_NBYTES) + 1; |
| uint8_t buf[16]; |
| int i; |
| |
| /* |
| * When an address_only command is executed nothing happen to the fifo, so |
| * just make nbytes = 0. |
| */ |
| if (address_only) { |
| nbytes = 0; |
| } |
| |
| switch (cmd) { |
| case READ_AUX: |
| case READ_I2C: |
| case READ_I2C_MOT: |
| s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd, |
| xlnx_dp_aux_get_address(s), |
| nbytes, buf); |
| s->core_registers[DP_REPLY_DATA_COUNT] = nbytes; |
| |
| if (s->core_registers[DP_AUX_REPLY_CODE] == AUX_I2C_ACK) { |
| xlnx_dp_aux_push_rx_fifo(s, buf, nbytes); |
| } |
| break; |
| case WRITE_AUX: |
| case WRITE_I2C: |
| case WRITE_I2C_MOT: |
| for (i = 0; i < nbytes; i++) { |
| buf[i] = xlnx_dp_aux_pop_tx_fifo(s); |
| } |
| s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd, |
| xlnx_dp_aux_get_address(s), |
| nbytes, buf); |
| xlnx_dp_aux_clear_tx_fifo(s); |
| break; |
| case WRITE_I2C_STATUS: |
| qemu_log_mask(LOG_UNIMP, "xlnx_dp: Write i2c status not implemented\n"); |
| break; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid command: %u", __func__, cmd); |
| return; |
| } |
| |
| s->core_registers[DP_INTERRUPT_SIGNAL_STATE] |= 0x04; |
| } |
| |
| static void xlnx_dp_set_dpdma(const Object *obj, const char *name, Object *val, |
| Error **errp) |
| { |
| XlnxDPState *s = XLNX_DP(obj); |
| if (s->console) { |
| DisplaySurface *surface = qemu_console_surface(s->console); |
| XlnxDPDMAState *dma = XLNX_DPDMA(val); |
| xlnx_dpdma_set_host_data_location(dma, DP_GRAPHIC_DMA_CHANNEL, |
| surface_data(surface)); |
| } |
| } |
| |
| static inline uint8_t xlnx_dp_global_alpha_value(XlnxDPState *s) |
| { |
| return (s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x1FE) >> 1; |
| } |
| |
| static inline bool xlnx_dp_global_alpha_enabled(XlnxDPState *s) |
| { |
| /* |
| * If the alpha is totally opaque (255) we consider the alpha is disabled to |
| * reduce CPU consumption. |
| */ |
| return ((xlnx_dp_global_alpha_value(s) != 0xFF) && |
| ((s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x01) != 0)); |
| } |
| |
| static void xlnx_dp_recreate_surface(XlnxDPState *s) |
| { |
| /* |
| * Two possibilities, if blending is enabled the console displays |
| * bout_plane, if not g_plane is displayed. |
| */ |
| uint16_t width = s->core_registers[DP_MAIN_STREAM_HRES]; |
| uint16_t height = s->core_registers[DP_MAIN_STREAM_VRES]; |
| DisplaySurface *current_console_surface = qemu_console_surface(s->console); |
| |
| if ((width != 0) && (height != 0)) { |
| /* |
| * As dpy_gfx_replace_surface calls qemu_free_displaysurface on the |
| * surface we need to be careful and don't free the surface associated |
| * to the console or double free will happen. |
| */ |
| if (s->bout_plane.surface != current_console_surface) { |
| qemu_free_displaysurface(s->bout_plane.surface); |
| } |
| if (s->v_plane.surface != current_console_surface) { |
| qemu_free_displaysurface(s->v_plane.surface); |
| } |
| if (s->g_plane.surface != current_console_surface) { |
| qemu_free_displaysurface(s->g_plane.surface); |
| } |
| |
| s->g_plane.surface |
| = qemu_create_displaysurface_from(width, height, |
| s->g_plane.format, 0, NULL); |
| s->v_plane.surface |
| = qemu_create_displaysurface_from(width, height, |
| s->v_plane.format, 0, NULL); |
| if (xlnx_dp_global_alpha_enabled(s)) { |
| s->bout_plane.surface = |
| qemu_create_displaysurface_from(width, |
| height, |
| s->g_plane.format, |
| 0, NULL); |
| dpy_gfx_replace_surface(s->console, s->bout_plane.surface); |
| } else { |
| s->bout_plane.surface = NULL; |
| dpy_gfx_replace_surface(s->console, s->g_plane.surface); |
| } |
| |
| xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL, |
| surface_data(s->g_plane.surface)); |
| xlnx_dpdma_set_host_data_location(s->dpdma, DP_VIDEO_DMA_CHANNEL, |
| surface_data(s->v_plane.surface)); |
| } |
| } |
| |
| /* |
| * Change the graphic format of the surface. |
| */ |
| static void xlnx_dp_change_graphic_fmt(XlnxDPState *s) |
| { |
| switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK) { |
| case DP_GRAPHIC_RGBA8888: |
| s->g_plane.format = PIXMAN_r8g8b8a8; |
| break; |
| case DP_GRAPHIC_ABGR8888: |
| s->g_plane.format = PIXMAN_a8b8g8r8; |
| break; |
| case DP_GRAPHIC_RGB565: |
| s->g_plane.format = PIXMAN_r5g6b5; |
| break; |
| case DP_GRAPHIC_RGB888: |
| s->g_plane.format = PIXMAN_r8g8b8; |
| break; |
| case DP_GRAPHIC_BGR888: |
| s->g_plane.format = PIXMAN_b8g8r8; |
| break; |
| default: |
| error_report("%s: unsupported graphic format %u", __func__, |
| s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK); |
| abort(); |
| } |
| |
| switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK) { |
| case 0: |
| s->v_plane.format = PIXMAN_x8b8g8r8; |
| break; |
| case DP_NL_VID_Y0_CB_Y1_CR: |
| s->v_plane.format = PIXMAN_yuy2; |
| break; |
| case DP_NL_VID_RGBA8880: |
| s->v_plane.format = PIXMAN_x8b8g8r8; |
| break; |
| default: |
| error_report("%s: unsupported video format %u", __func__, |
| s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK); |
| abort(); |
| } |
| |
| xlnx_dp_recreate_surface(s); |
| } |
| |
| static void xlnx_dp_update_irq(XlnxDPState *s) |
| { |
| uint32_t flags; |
| |
| flags = s->core_registers[DP_INT_STATUS] & ~s->core_registers[DP_INT_MASK]; |
| DPRINTF("update IRQ value = %" PRIx32 "\n", flags); |
| qemu_set_irq(s->irq, flags != 0); |
| } |
| |
| static uint64_t xlnx_dp_read(void *opaque, hwaddr offset, unsigned size) |
| { |
| XlnxDPState *s = XLNX_DP(opaque); |
| uint64_t ret = 0; |
| |
| offset = offset >> 2; |
| |
| switch (offset) { |
| case DP_TX_USER_FIFO_OVERFLOW: |
| /* This register is cleared after a read */ |
| ret = s->core_registers[DP_TX_USER_FIFO_OVERFLOW]; |
| s->core_registers[DP_TX_USER_FIFO_OVERFLOW] = 0; |
| break; |
| case DP_AUX_REPLY_DATA: |
| ret = xlnx_dp_aux_pop_rx_fifo(s); |
| break; |
| case DP_INTERRUPT_SIGNAL_STATE: |
| /* |
| * XXX: Not sure it is the right thing to do actually. |
| * The register is not written by the device driver so it's stuck |
| * to 0x04. |
| */ |
| ret = s->core_registers[DP_INTERRUPT_SIGNAL_STATE]; |
| s->core_registers[DP_INTERRUPT_SIGNAL_STATE] &= ~0x04; |
| break; |
| case DP_AUX_WRITE_FIFO: |
| case DP_TX_AUDIO_INFO_DATA(0): |
| case DP_TX_AUDIO_INFO_DATA(1): |
| case DP_TX_AUDIO_INFO_DATA(2): |
| case DP_TX_AUDIO_INFO_DATA(3): |
| case DP_TX_AUDIO_INFO_DATA(4): |
| case DP_TX_AUDIO_INFO_DATA(5): |
| case DP_TX_AUDIO_INFO_DATA(6): |
| case DP_TX_AUDIO_INFO_DATA(7): |
| case DP_TX_AUDIO_EXT_DATA(0): |
| case DP_TX_AUDIO_EXT_DATA(1): |
| case DP_TX_AUDIO_EXT_DATA(2): |
| case DP_TX_AUDIO_EXT_DATA(3): |
| case DP_TX_AUDIO_EXT_DATA(4): |
| case DP_TX_AUDIO_EXT_DATA(5): |
| case DP_TX_AUDIO_EXT_DATA(6): |
| case DP_TX_AUDIO_EXT_DATA(7): |
| case DP_TX_AUDIO_EXT_DATA(8): |
| /* write only registers */ |
| ret = 0; |
| break; |
| default: |
| assert(offset <= (0x3AC >> 2)); |
| if (offset == (0x3A8 >> 2) || offset == (0x3AC >> 2)) { |
| ret = s->core_registers[DP_INT_MASK]; |
| } else { |
| ret = s->core_registers[offset]; |
| } |
| break; |
| } |
| |
| DPRINTF("core read @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset << 2, ret); |
| return ret; |
| } |
| |
| static void xlnx_dp_write(void *opaque, hwaddr offset, uint64_t value, |
| unsigned size) |
| { |
| XlnxDPState *s = XLNX_DP(opaque); |
| |
| DPRINTF("core write @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset, value); |
| |
| offset = offset >> 2; |
| |
| switch (offset) { |
| /* |
| * Only special write case are handled. |
| */ |
| case DP_LINK_BW_SET: |
| s->core_registers[offset] = value & 0x000000FF; |
| break; |
| case DP_LANE_COUNT_SET: |
| case DP_MAIN_STREAM_MISC0: |
| s->core_registers[offset] = value & 0x0000000F; |
| break; |
| case DP_TRAINING_PATTERN_SET: |
| case DP_LINK_QUAL_PATTERN_SET: |
| case DP_MAIN_STREAM_POLARITY: |
| case DP_PHY_VOLTAGE_DIFF_LANE_0: |
| case DP_PHY_VOLTAGE_DIFF_LANE_1: |
| s->core_registers[offset] = value & 0x00000003; |
| break; |
| case DP_ENHANCED_FRAME_EN: |
| case DP_SCRAMBLING_DISABLE: |
| case DP_DOWNSPREAD_CTRL: |
| case DP_MAIN_STREAM_ENABLE: |
| case DP_TRANSMIT_PRBS7: |
| s->core_registers[offset] = value & 0x00000001; |
| break; |
| case DP_PHY_CLOCK_SELECT: |
| s->core_registers[offset] = value & 0x00000007; |
| break; |
| case DP_SOFTWARE_RESET: |
| /* |
| * No need to update this bit as it's read '0'. |
| */ |
| /* |
| * TODO: reset IP. |
| */ |
| break; |
| case DP_TRANSMITTER_ENABLE: |
| s->core_registers[offset] = value & 0x01; |
| ptimer_transaction_begin(s->vblank); |
| if (value & 0x1) { |
| ptimer_run(s->vblank, 0); |
| } else { |
| ptimer_stop(s->vblank); |
| } |
| ptimer_transaction_commit(s->vblank); |
| break; |
| case DP_FORCE_SCRAMBLER_RESET: |
| /* |
| * No need to update this bit as it's read '0'. |
| */ |
| /* |
| * TODO: force a scrambler reset?? |
| */ |
| break; |
| case DP_AUX_COMMAND_REGISTER: |
| s->core_registers[offset] = value & 0x00001F0F; |
| xlnx_dp_aux_set_command(s, s->core_registers[offset]); |
| break; |
| case DP_MAIN_STREAM_HTOTAL: |
| case DP_MAIN_STREAM_VTOTAL: |
| case DP_MAIN_STREAM_HSTART: |
| case DP_MAIN_STREAM_VSTART: |
| s->core_registers[offset] = value & 0x0000FFFF; |
| break; |
| case DP_MAIN_STREAM_HRES: |
| case DP_MAIN_STREAM_VRES: |
| s->core_registers[offset] = value & 0x0000FFFF; |
| xlnx_dp_recreate_surface(s); |
| break; |
| case DP_MAIN_STREAM_HSWIDTH: |
| case DP_MAIN_STREAM_VSWIDTH: |
| s->core_registers[offset] = value & 0x00007FFF; |
| break; |
| case DP_MAIN_STREAM_MISC1: |
| s->core_registers[offset] = value & 0x00000086; |
| break; |
| case DP_MAIN_STREAM_M_VID: |
| case DP_MAIN_STREAM_N_VID: |
| s->core_registers[offset] = value & 0x00FFFFFF; |
| break; |
| case DP_MSA_TRANSFER_UNIT_SIZE: |
| case DP_MIN_BYTES_PER_TU: |
| case DP_INIT_WAIT: |
| s->core_registers[offset] = value & 0x00000007; |
| break; |
| case DP_USER_DATA_COUNT_PER_LANE: |
| s->core_registers[offset] = value & 0x0003FFFF; |
| break; |
| case DP_FRAC_BYTES_PER_TU: |
| s->core_registers[offset] = value & 0x000003FF; |
| break; |
| case DP_PHY_RESET: |
| s->core_registers[offset] = value & 0x00010003; |
| /* |
| * TODO: Reset something? |
| */ |
| break; |
| case DP_TX_PHY_POWER_DOWN: |
| s->core_registers[offset] = value & 0x0000000F; |
| /* |
| * TODO: Power down things? |
| */ |
| break; |
| case DP_AUX_WRITE_FIFO: { |
| uint8_t c = value; |
| xlnx_dp_aux_push_tx_fifo(s, &c, 1); |
| break; |
| } |
| case DP_AUX_CLOCK_DIVIDER: |
| break; |
| case DP_AUX_REPLY_COUNT: |
| /* |
| * Writing to this register clear the counter. |
| */ |
| s->core_registers[offset] = 0x00000000; |
| break; |
| case DP_AUX_ADDRESS: |
| s->core_registers[offset] = value & 0x000FFFFF; |
| break; |
| case DP_VERSION_REGISTER: |
| case DP_CORE_ID: |
| case DP_TX_USER_FIFO_OVERFLOW: |
| case DP_AUX_REPLY_DATA: |
| case DP_AUX_REPLY_CODE: |
| case DP_REPLY_DATA_COUNT: |
| case DP_REPLY_STATUS: |
| case DP_HPD_DURATION: |
| /* |
| * Write to read only location.. |
| */ |
| break; |
| case DP_TX_AUDIO_CONTROL: |
| s->core_registers[offset] = value & 0x00000001; |
| xlnx_dp_audio_activate(s); |
| break; |
| case DP_TX_AUDIO_CHANNELS: |
| s->core_registers[offset] = value & 0x00000007; |
| xlnx_dp_audio_activate(s); |
| break; |
| case DP_INT_STATUS: |
| s->core_registers[DP_INT_STATUS] &= ~value; |
| xlnx_dp_update_irq(s); |
| break; |
| case DP_INT_EN: |
| s->core_registers[DP_INT_MASK] &= ~value; |
| xlnx_dp_update_irq(s); |
| break; |
| case DP_INT_DS: |
| s->core_registers[DP_INT_MASK] |= value; |
| xlnx_dp_update_irq(s); |
| break; |
| default: |
| assert(offset <= (0x504C >> 2)); |
| s->core_registers[offset] = value; |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps dp_ops = { |
| .read = xlnx_dp_read, |
| .write = xlnx_dp_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| .impl = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| }; |
| |
| /* |
| * This is to handle Read/Write to the Video Blender. |
| */ |
| static void xlnx_dp_vblend_write(void *opaque, hwaddr offset, |
| uint64_t value, unsigned size) |
| { |
| XlnxDPState *s = XLNX_DP(opaque); |
| bool alpha_was_enabled; |
| |
| DPRINTF("vblend: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset, |
| (uint32_t)value); |
| offset = offset >> 2; |
| |
| switch (offset) { |
| case V_BLEND_BG_CLR_0: |
| case V_BLEND_BG_CLR_1: |
| case V_BLEND_BG_CLR_2: |
| s->vblend_registers[offset] = value & 0x00000FFF; |
| break; |
| case V_BLEND_SET_GLOBAL_ALPHA_REG: |
| /* |
| * A write to this register can enable or disable blending. Thus we need |
| * to recreate the surfaces. |
| */ |
| alpha_was_enabled = xlnx_dp_global_alpha_enabled(s); |
| s->vblend_registers[offset] = value & 0x000001FF; |
| if (xlnx_dp_global_alpha_enabled(s) != alpha_was_enabled) { |
| xlnx_dp_recreate_surface(s); |
| } |
| break; |
| case V_BLEND_OUTPUT_VID_FORMAT: |
| s->vblend_registers[offset] = value & 0x00000017; |
| break; |
| case V_BLEND_LAYER0_CONTROL: |
| case V_BLEND_LAYER1_CONTROL: |
| s->vblend_registers[offset] = value & 0x00000103; |
| break; |
| case V_BLEND_RGB2YCBCR_COEFF(0): |
| case V_BLEND_RGB2YCBCR_COEFF(1): |
| case V_BLEND_RGB2YCBCR_COEFF(2): |
| case V_BLEND_RGB2YCBCR_COEFF(3): |
| case V_BLEND_RGB2YCBCR_COEFF(4): |
| case V_BLEND_RGB2YCBCR_COEFF(5): |
| case V_BLEND_RGB2YCBCR_COEFF(6): |
| case V_BLEND_RGB2YCBCR_COEFF(7): |
| case V_BLEND_RGB2YCBCR_COEFF(8): |
| case V_BLEND_IN1CSC_COEFF(0): |
| case V_BLEND_IN1CSC_COEFF(1): |
| case V_BLEND_IN1CSC_COEFF(2): |
| case V_BLEND_IN1CSC_COEFF(3): |
| case V_BLEND_IN1CSC_COEFF(4): |
| case V_BLEND_IN1CSC_COEFF(5): |
| case V_BLEND_IN1CSC_COEFF(6): |
| case V_BLEND_IN1CSC_COEFF(7): |
| case V_BLEND_IN1CSC_COEFF(8): |
| case V_BLEND_IN2CSC_COEFF(0): |
| case V_BLEND_IN2CSC_COEFF(1): |
| case V_BLEND_IN2CSC_COEFF(2): |
| case V_BLEND_IN2CSC_COEFF(3): |
| case V_BLEND_IN2CSC_COEFF(4): |
| case V_BLEND_IN2CSC_COEFF(5): |
| case V_BLEND_IN2CSC_COEFF(6): |
| case V_BLEND_IN2CSC_COEFF(7): |
| case V_BLEND_IN2CSC_COEFF(8): |
| s->vblend_registers[offset] = value & 0x0000FFFF; |
| break; |
| case V_BLEND_LUMA_IN1CSC_OFFSET: |
| case V_BLEND_CR_IN1CSC_OFFSET: |
| case V_BLEND_CB_IN1CSC_OFFSET: |
| case V_BLEND_LUMA_IN2CSC_OFFSET: |
| case V_BLEND_CR_IN2CSC_OFFSET: |
| case V_BLEND_CB_IN2CSC_OFFSET: |
| case V_BLEND_LUMA_OUTCSC_OFFSET: |
| case V_BLEND_CR_OUTCSC_OFFSET: |
| case V_BLEND_CB_OUTCSC_OFFSET: |
| s->vblend_registers[offset] = value & 0x3FFF7FFF; |
| break; |
| case V_BLEND_CHROMA_KEY_ENABLE: |
| s->vblend_registers[offset] = value & 0x00000003; |
| break; |
| case V_BLEND_CHROMA_KEY_COMP1: |
| case V_BLEND_CHROMA_KEY_COMP2: |
| case V_BLEND_CHROMA_KEY_COMP3: |
| s->vblend_registers[offset] = value & 0x0FFF0FFF; |
| break; |
| default: |
| s->vblend_registers[offset] = value; |
| break; |
| } |
| } |
| |
| static uint64_t xlnx_dp_vblend_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| XlnxDPState *s = XLNX_DP(opaque); |
| |
| DPRINTF("vblend: read @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset, |
| s->vblend_registers[offset >> 2]); |
| return s->vblend_registers[offset >> 2]; |
| } |
| |
| static const MemoryRegionOps vblend_ops = { |
| .read = xlnx_dp_vblend_read, |
| .write = xlnx_dp_vblend_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| .impl = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| }; |
| |
| /* |
| * This is to handle Read/Write to the Audio Video buffer manager. |
| */ |
| static void xlnx_dp_avbufm_write(void *opaque, hwaddr offset, uint64_t value, |
| unsigned size) |
| { |
| XlnxDPState *s = XLNX_DP(opaque); |
| |
| DPRINTF("avbufm: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset, |
| (uint32_t)value); |
| offset = offset >> 2; |
| |
| switch (offset) { |
| case AV_BUF_FORMAT: |
| s->avbufm_registers[offset] = value & 0x00000FFF; |
| xlnx_dp_change_graphic_fmt(s); |
| break; |
| case AV_CHBUF0: |
| case AV_CHBUF1: |
| case AV_CHBUF2: |
| case AV_CHBUF3: |
| case AV_CHBUF4: |
| case AV_CHBUF5: |
| s->avbufm_registers[offset] = value & 0x0000007F; |
| break; |
| case AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT: |
| s->avbufm_registers[offset] = value & 0x0000007F; |
| break; |
| case AV_BUF_DITHER_CONFIG: |
| s->avbufm_registers[offset] = value & 0x000007FF; |
| break; |
| case AV_BUF_DITHER_CONFIG_MAX: |
| case AV_BUF_DITHER_CONFIG_MIN: |
| s->avbufm_registers[offset] = value & 0x00000FFF; |
| break; |
| case AV_BUF_PATTERN_GEN_SELECT: |
| s->avbufm_registers[offset] = value & 0xFFFFFF03; |
| break; |
| case AV_BUF_AUD_VID_CLK_SOURCE: |
| s->avbufm_registers[offset] = value & 0x00000007; |
| break; |
| case AV_BUF_SRST_REG: |
| s->avbufm_registers[offset] = value & 0x00000002; |
| break; |
| case AV_BUF_AUDIO_CH_CONFIG: |
| s->avbufm_registers[offset] = value & 0x00000003; |
| break; |
| case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0): |
| case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1): |
| case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2): |
| case AV_BUF_VIDEO_COMP_SCALE_FACTOR(0): |
| case AV_BUF_VIDEO_COMP_SCALE_FACTOR(1): |
| case AV_BUF_VIDEO_COMP_SCALE_FACTOR(2): |
| s->avbufm_registers[offset] = value & 0x0000FFFF; |
| break; |
| case AV_BUF_LIVE_VIDEO_COMP_SF(0): |
| case AV_BUF_LIVE_VIDEO_COMP_SF(1): |
| case AV_BUF_LIVE_VIDEO_COMP_SF(2): |
| case AV_BUF_LIVE_VID_CONFIG: |
| case AV_BUF_LIVE_GFX_COMP_SF(0): |
| case AV_BUF_LIVE_GFX_COMP_SF(1): |
| case AV_BUF_LIVE_GFX_COMP_SF(2): |
| case AV_BUF_LIVE_GFX_CONFIG: |
| case AV_BUF_NON_LIVE_LATENCY: |
| case AV_BUF_STC_CONTROL: |
| case AV_BUF_STC_INIT_VALUE0: |
| case AV_BUF_STC_INIT_VALUE1: |
| case AV_BUF_STC_ADJ: |
| case AV_BUF_STC_VIDEO_VSYNC_TS_REG0: |
| case AV_BUF_STC_VIDEO_VSYNC_TS_REG1: |
| case AV_BUF_STC_EXT_VSYNC_TS_REG0: |
| case AV_BUF_STC_EXT_VSYNC_TS_REG1: |
| case AV_BUF_STC_CUSTOM_EVENT_TS_REG0: |
| case AV_BUF_STC_CUSTOM_EVENT_TS_REG1: |
| case AV_BUF_STC_CUSTOM_EVENT2_TS_REG0: |
| case AV_BUF_STC_CUSTOM_EVENT2_TS_REG1: |
| case AV_BUF_STC_SNAPSHOT0: |
| case AV_BUF_STC_SNAPSHOT1: |
| case AV_BUF_HCOUNT_VCOUNT_INT0: |
| case AV_BUF_HCOUNT_VCOUNT_INT1: |
| qemu_log_mask(LOG_UNIMP, "avbufm: unimplemented register 0x%04" |
| PRIx64 "\n", |
| offset << 2); |
| break; |
| default: |
| s->avbufm_registers[offset] = value; |
| break; |
| } |
| } |
| |
| static uint64_t xlnx_dp_avbufm_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| XlnxDPState *s = XLNX_DP(opaque); |
| |
| offset = offset >> 2; |
| return s->avbufm_registers[offset]; |
| } |
| |
| static const MemoryRegionOps avbufm_ops = { |
| .read = xlnx_dp_avbufm_read, |
| .write = xlnx_dp_avbufm_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| .impl = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| }; |
| |
| /* |
| * This is a global alpha blending using pixman. |
| * Both graphic and video planes are multiplied with the global alpha |
| * coefficient and added. |
| */ |
| static inline void xlnx_dp_blend_surface(XlnxDPState *s) |
| { |
| pixman_fixed_t alpha1[] = { pixman_double_to_fixed(1), |
| pixman_double_to_fixed(1), |
| pixman_double_to_fixed(1.0) }; |
| pixman_fixed_t alpha2[] = { pixman_double_to_fixed(1), |
| pixman_double_to_fixed(1), |
| pixman_double_to_fixed(1.0) }; |
| |
| if ((surface_width(s->g_plane.surface) |
| != surface_width(s->v_plane.surface)) || |
| (surface_height(s->g_plane.surface) |
| != surface_height(s->v_plane.surface))) { |
| return; |
| } |
| |
| alpha1[2] = pixman_double_to_fixed((double)(xlnx_dp_global_alpha_value(s)) |
| / 256.0); |
| alpha2[2] = pixman_double_to_fixed((255.0 |
| - (double)xlnx_dp_global_alpha_value(s)) |
| / 256.0); |
| |
| pixman_image_set_filter(s->g_plane.surface->image, |
| PIXMAN_FILTER_CONVOLUTION, alpha1, 3); |
| pixman_image_composite(PIXMAN_OP_SRC, s->g_plane.surface->image, 0, |
| s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0, |
| surface_width(s->g_plane.surface), |
| surface_height(s->g_plane.surface)); |
| pixman_image_set_filter(s->v_plane.surface->image, |
| PIXMAN_FILTER_CONVOLUTION, alpha2, 3); |
| pixman_image_composite(PIXMAN_OP_ADD, s->v_plane.surface->image, 0, |
| s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0, |
| surface_width(s->g_plane.surface), |
| surface_height(s->g_plane.surface)); |
| } |
| |
| static void xlnx_dp_update_display(void *opaque) |
| { |
| XlnxDPState *s = XLNX_DP(opaque); |
| |
| if ((s->core_registers[DP_TRANSMITTER_ENABLE] & 0x01) == 0) { |
| return; |
| } |
| |
| xlnx_dpdma_trigger_vsync_irq(s->dpdma); |
| |
| /* |
| * Trigger the DMA channel. |
| */ |
| if (!xlnx_dpdma_start_operation(s->dpdma, 3, false)) { |
| /* |
| * An error occurred don't do anything with the data.. |
| * Trigger an underflow interrupt. |
| */ |
| s->core_registers[DP_INT_STATUS] |= (1 << 21); |
| xlnx_dp_update_irq(s); |
| return; |
| } |
| |
| if (xlnx_dp_global_alpha_enabled(s)) { |
| if (!xlnx_dpdma_start_operation(s->dpdma, 0, false)) { |
| s->core_registers[DP_INT_STATUS] |= (1 << 21); |
| xlnx_dp_update_irq(s); |
| return; |
| } |
| xlnx_dp_blend_surface(s); |
| } |
| |
| /* |
| * XXX: We might want to update only what changed. |
| */ |
| dpy_gfx_update_full(s->console); |
| } |
| |
| static const GraphicHwOps xlnx_dp_gfx_ops = { |
| .gfx_update = xlnx_dp_update_display, |
| }; |
| |
| static void xlnx_dp_init(Object *obj) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(obj); |
| XlnxDPState *s = XLNX_DP(obj); |
| |
| memory_region_init(&s->container, obj, TYPE_XLNX_DP, DP_CONTAINER_SIZE); |
| |
| memory_region_init_io(&s->core_iomem, obj, &dp_ops, s, TYPE_XLNX_DP |
| ".core", sizeof(s->core_registers)); |
| memory_region_add_subregion(&s->container, DP_CORE_REG_OFFSET, |
| &s->core_iomem); |
| |
| memory_region_init_io(&s->vblend_iomem, obj, &vblend_ops, s, TYPE_XLNX_DP |
| ".v_blend", sizeof(s->vblend_registers)); |
| memory_region_add_subregion(&s->container, DP_VBLEND_REG_OFFSET, |
| &s->vblend_iomem); |
| |
| memory_region_init_io(&s->avbufm_iomem, obj, &avbufm_ops, s, TYPE_XLNX_DP |
| ".av_buffer_manager", sizeof(s->avbufm_registers)); |
| memory_region_add_subregion(&s->container, DP_AVBUF_REG_OFFSET, |
| &s->avbufm_iomem); |
| |
| memory_region_init_io(&s->audio_iomem, obj, &audio_ops, s, TYPE_XLNX_DP |
| ".audio", sizeof(s->audio_registers)); |
| memory_region_add_subregion(&s->container, 0xC000, &s->audio_iomem); |
| |
| sysbus_init_mmio(sbd, &s->container); |
| sysbus_init_irq(sbd, &s->irq); |
| |
| object_property_add_link(obj, "dpdma", TYPE_XLNX_DPDMA, |
| (Object **) &s->dpdma, |
| xlnx_dp_set_dpdma, |
| OBJ_PROP_LINK_STRONG); |
| |
| /* |
| * Initialize AUX Bus. |
| */ |
| s->aux_bus = aux_bus_init(DEVICE(obj), "aux"); |
| |
| /* |
| * Initialize DPCD and EDID.. |
| */ |
| s->dpcd = DPCD(qdev_new("dpcd")); |
| object_property_add_child(OBJECT(s), "dpcd", OBJECT(s->dpcd)); |
| |
| s->edid = I2CDDC(qdev_new("i2c-ddc")); |
| i2c_slave_set_address(I2C_SLAVE(s->edid), 0x50); |
| object_property_add_child(OBJECT(s), "edid", OBJECT(s->edid)); |
| |
| fifo8_create(&s->rx_fifo, 16); |
| fifo8_create(&s->tx_fifo, 16); |
| } |
| |
| static void xlnx_dp_finalize(Object *obj) |
| { |
| XlnxDPState *s = XLNX_DP(obj); |
| |
| fifo8_destroy(&s->tx_fifo); |
| fifo8_destroy(&s->rx_fifo); |
| } |
| |
| static void vblank_hit(void *opaque) |
| { |
| XlnxDPState *s = XLNX_DP(opaque); |
| |
| s->core_registers[DP_INT_STATUS] |= DP_INT_VBLNK_START; |
| xlnx_dp_update_irq(s); |
| } |
| |
| static void xlnx_dp_realize(DeviceState *dev, Error **errp) |
| { |
| XlnxDPState *s = XLNX_DP(dev); |
| DisplaySurface *surface; |
| struct audsettings as; |
| |
| if (!AUD_register_card("xlnx_dp.audio", &s->aud_card, errp)) { |
| return; |
| } |
| |
| aux_bus_realize(s->aux_bus); |
| |
| qdev_realize(DEVICE(s->dpcd), BUS(s->aux_bus), &error_fatal); |
| aux_map_slave(AUX_SLAVE(s->dpcd), 0x0000); |
| |
| qdev_realize_and_unref(DEVICE(s->edid), BUS(aux_get_i2c_bus(s->aux_bus)), |
| &error_fatal); |
| |
| s->console = graphic_console_init(dev, 0, &xlnx_dp_gfx_ops, s); |
| surface = qemu_console_surface(s->console); |
| xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL, |
| surface_data(surface)); |
| |
| as.freq = 44100; |
| as.nchannels = 2; |
| as.fmt = AUDIO_FORMAT_S16; |
| as.endianness = 0; |
| |
| s->amixer_output_stream = AUD_open_out(&s->aud_card, |
| s->amixer_output_stream, |
| "xlnx_dp.audio.out", |
| s, |
| xlnx_dp_audio_callback, |
| &as); |
| AUD_set_volume_out(s->amixer_output_stream, 0, 255, 255); |
| xlnx_dp_audio_activate(s); |
| s->vblank = ptimer_init(vblank_hit, s, DP_VBLANK_PTIMER_POLICY); |
| ptimer_transaction_begin(s->vblank); |
| ptimer_set_freq(s->vblank, 30); |
| ptimer_transaction_commit(s->vblank); |
| } |
| |
| static void xlnx_dp_reset(DeviceState *dev) |
| { |
| XlnxDPState *s = XLNX_DP(dev); |
| |
| memset(s->core_registers, 0, sizeof(s->core_registers)); |
| s->core_registers[DP_VERSION_REGISTER] = 0x04010000; |
| s->core_registers[DP_CORE_ID] = 0x01020000; |
| s->core_registers[DP_REPLY_STATUS] = 0x00000010; |
| s->core_registers[DP_MSA_TRANSFER_UNIT_SIZE] = 0x00000040; |
| s->core_registers[DP_INIT_WAIT] = 0x00000020; |
| s->core_registers[DP_PHY_RESET] = 0x00010003; |
| s->core_registers[DP_INT_MASK] = 0xFFFFF03F; |
| s->core_registers[DP_PHY_STATUS] = 0x00000043; |
| s->core_registers[DP_INTERRUPT_SIGNAL_STATE] = 0x00000001; |
| |
| s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(0)] = 0x00001000; |
| s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(4)] = 0x00001000; |
| s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(8)] = 0x00001000; |
| s->vblend_registers[V_BLEND_IN1CSC_COEFF(0)] = 0x00001000; |
| s->vblend_registers[V_BLEND_IN1CSC_COEFF(4)] = 0x00001000; |
| s->vblend_registers[V_BLEND_IN1CSC_COEFF(8)] = 0x00001000; |
| s->vblend_registers[V_BLEND_IN2CSC_COEFF(0)] = 0x00001000; |
| s->vblend_registers[V_BLEND_IN2CSC_COEFF(4)] = 0x00001000; |
| s->vblend_registers[V_BLEND_IN2CSC_COEFF(8)] = 0x00001000; |
| |
| s->avbufm_registers[AV_BUF_NON_LIVE_LATENCY] = 0x00000180; |
| s->avbufm_registers[AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT] = 0x00000008; |
| s->avbufm_registers[AV_BUF_DITHER_CONFIG_MAX] = 0x00000FFF; |
| s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0)] = 0x00010101; |
| s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1)] = 0x00010101; |
| s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2)] = 0x00010101; |
| s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(0)] = 0x00010101; |
| s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(1)] = 0x00010101; |
| s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(2)] = 0x00010101; |
| s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(0)] = 0x00010101; |
| s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(1)] = 0x00010101; |
| s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(2)] = 0x00010101; |
| s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(0)] = 0x00010101; |
| s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(1)] = 0x00010101; |
| s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(2)] = 0x00010101; |
| |
| memset(s->audio_registers, 0, sizeof(s->audio_registers)); |
| s->byte_left = 0; |
| |
| xlnx_dp_aux_clear_rx_fifo(s); |
| xlnx_dp_change_graphic_fmt(s); |
| xlnx_dp_update_irq(s); |
| } |
| |
| static Property xlnx_dp_device_properties[] = { |
| DEFINE_AUDIO_PROPERTIES(XlnxDPState, aud_card), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void xlnx_dp_class_init(ObjectClass *oc, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(oc); |
| |
| dc->realize = xlnx_dp_realize; |
| dc->vmsd = &vmstate_dp; |
| dc->reset = xlnx_dp_reset; |
| device_class_set_props(dc, xlnx_dp_device_properties); |
| } |
| |
| static const TypeInfo xlnx_dp_info = { |
| .name = TYPE_XLNX_DP, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(XlnxDPState), |
| .instance_init = xlnx_dp_init, |
| .instance_finalize = xlnx_dp_finalize, |
| .class_init = xlnx_dp_class_init, |
| }; |
| |
| static void xlnx_dp_register_types(void) |
| { |
| type_register_static(&xlnx_dp_info); |
| } |
| |
| type_init(xlnx_dp_register_types) |