| /* |
| * Kvaser PCI CAN device (SJA1000 based) emulation |
| * |
| * Copyright (c) 2013-2014 Jin Yang |
| * Copyright (c) 2014-2018 Pavel Pisa |
| * |
| * Partially based on educational PCIexpress APOHW hardware |
| * emulator used fro class A0B36APO at CTU FEE course by |
| * Rostislav Lisovy and Pavel Pisa |
| * |
| * Initial development supported by Google GSoC 2013 from RTEMS project slot |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/event_notifier.h" |
| #include "qemu/module.h" |
| #include "qemu/thread.h" |
| #include "qemu/sockets.h" |
| #include "qapi/error.h" |
| #include "chardev/char.h" |
| #include "hw/irq.h" |
| #include "hw/pci/pci_device.h" |
| #include "hw/qdev-properties.h" |
| #include "migration/vmstate.h" |
| #include "net/can_emu.h" |
| |
| #include "can_sja1000.h" |
| #include "qom/object.h" |
| |
| #define TYPE_CAN_PCI_DEV "kvaser_pci" |
| |
| typedef struct KvaserPCIState KvaserPCIState; |
| DECLARE_INSTANCE_CHECKER(KvaserPCIState, KVASER_PCI_DEV, |
| TYPE_CAN_PCI_DEV) |
| |
| #ifndef KVASER_PCI_VENDOR_ID1 |
| #define KVASER_PCI_VENDOR_ID1 0x10e8 /* the PCI device and vendor IDs */ |
| #endif |
| |
| #ifndef KVASER_PCI_DEVICE_ID1 |
| #define KVASER_PCI_DEVICE_ID1 0x8406 |
| #endif |
| |
| #define KVASER_PCI_S5920_RANGE 0x80 |
| #define KVASER_PCI_SJA_RANGE 0x80 |
| #define KVASER_PCI_XILINX_RANGE 0x8 |
| |
| #define KVASER_PCI_BYTES_PER_SJA 0x20 |
| |
| #define S5920_OMB 0x0C |
| #define S5920_IMB 0x1C |
| #define S5920_MBEF 0x34 |
| #define S5920_INTCSR 0x38 |
| #define S5920_RCR 0x3C |
| #define S5920_PTCR 0x60 |
| |
| #define S5920_INTCSR_ADDON_INTENABLE_M 0x2000 |
| #define S5920_INTCSR_INTERRUPT_ASSERTED_M 0x800000 |
| |
| #define KVASER_PCI_XILINX_VERINT 7 /* Lower nibble simulate interrupts, |
| high nibble version number. */ |
| |
| #define KVASER_PCI_XILINX_VERSION_NUMBER 13 |
| |
| struct KvaserPCIState { |
| /*< private >*/ |
| PCIDevice dev; |
| /*< public >*/ |
| MemoryRegion s5920_io; |
| MemoryRegion sja_io; |
| MemoryRegion xilinx_io; |
| |
| CanSJA1000State sja_state; |
| qemu_irq irq; |
| |
| uint32_t s5920_intcsr; |
| uint32_t s5920_irqstate; |
| |
| CanBusState *canbus; |
| }; |
| |
| static void kvaser_pci_irq_handler(void *opaque, int irq_num, int level) |
| { |
| KvaserPCIState *d = (KvaserPCIState *)opaque; |
| |
| d->s5920_irqstate = level; |
| if (d->s5920_intcsr & S5920_INTCSR_ADDON_INTENABLE_M) { |
| pci_set_irq(&d->dev, level); |
| } |
| } |
| |
| static void kvaser_pci_reset(DeviceState *dev) |
| { |
| KvaserPCIState *d = KVASER_PCI_DEV(dev); |
| CanSJA1000State *s = &d->sja_state; |
| |
| can_sja_hardware_reset(s); |
| } |
| |
| static uint64_t kvaser_pci_s5920_io_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| KvaserPCIState *d = opaque; |
| uint64_t val; |
| |
| switch (addr) { |
| case S5920_INTCSR: |
| val = d->s5920_intcsr; |
| val &= ~S5920_INTCSR_INTERRUPT_ASSERTED_M; |
| if (d->s5920_irqstate) { |
| val |= S5920_INTCSR_INTERRUPT_ASSERTED_M; |
| } |
| return val; |
| } |
| return 0; |
| } |
| |
| static void kvaser_pci_s5920_io_write(void *opaque, hwaddr addr, uint64_t data, |
| unsigned size) |
| { |
| KvaserPCIState *d = opaque; |
| |
| switch (addr) { |
| case S5920_INTCSR: |
| if (d->s5920_irqstate && |
| ((d->s5920_intcsr ^ data) & S5920_INTCSR_ADDON_INTENABLE_M)) { |
| pci_set_irq(&d->dev, !!(data & S5920_INTCSR_ADDON_INTENABLE_M)); |
| } |
| d->s5920_intcsr = data; |
| break; |
| } |
| } |
| |
| static uint64_t kvaser_pci_sja_io_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| KvaserPCIState *d = opaque; |
| CanSJA1000State *s = &d->sja_state; |
| |
| if (addr >= KVASER_PCI_BYTES_PER_SJA) { |
| return 0; |
| } |
| |
| return can_sja_mem_read(s, addr, size); |
| } |
| |
| static void kvaser_pci_sja_io_write(void *opaque, hwaddr addr, uint64_t data, |
| unsigned size) |
| { |
| KvaserPCIState *d = opaque; |
| CanSJA1000State *s = &d->sja_state; |
| |
| if (addr >= KVASER_PCI_BYTES_PER_SJA) { |
| return; |
| } |
| |
| can_sja_mem_write(s, addr, data, size); |
| } |
| |
| static uint64_t kvaser_pci_xilinx_io_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| switch (addr) { |
| case KVASER_PCI_XILINX_VERINT: |
| return (KVASER_PCI_XILINX_VERSION_NUMBER << 4) | 0; |
| } |
| |
| return 0; |
| } |
| |
| static void kvaser_pci_xilinx_io_write(void *opaque, hwaddr addr, uint64_t data, |
| unsigned size) |
| { |
| |
| } |
| |
| static const MemoryRegionOps kvaser_pci_s5920_io_ops = { |
| .read = kvaser_pci_s5920_io_read, |
| .write = kvaser_pci_s5920_io_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .impl = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| }; |
| |
| static const MemoryRegionOps kvaser_pci_sja_io_ops = { |
| .read = kvaser_pci_sja_io_read, |
| .write = kvaser_pci_sja_io_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .impl = { |
| .max_access_size = 1, |
| }, |
| }; |
| |
| static const MemoryRegionOps kvaser_pci_xilinx_io_ops = { |
| .read = kvaser_pci_xilinx_io_read, |
| .write = kvaser_pci_xilinx_io_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .impl = { |
| .max_access_size = 1, |
| }, |
| }; |
| |
| static void kvaser_pci_realize(PCIDevice *pci_dev, Error **errp) |
| { |
| KvaserPCIState *d = KVASER_PCI_DEV(pci_dev); |
| CanSJA1000State *s = &d->sja_state; |
| uint8_t *pci_conf; |
| |
| pci_conf = pci_dev->config; |
| pci_conf[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */ |
| |
| d->irq = qemu_allocate_irq(kvaser_pci_irq_handler, d, 0); |
| |
| can_sja_init(s, d->irq); |
| |
| if (can_sja_connect_to_bus(s, d->canbus) < 0) { |
| error_setg(errp, "can_sja_connect_to_bus failed"); |
| return; |
| } |
| |
| memory_region_init_io(&d->s5920_io, OBJECT(d), &kvaser_pci_s5920_io_ops, |
| d, "kvaser_pci-s5920", KVASER_PCI_S5920_RANGE); |
| memory_region_init_io(&d->sja_io, OBJECT(d), &kvaser_pci_sja_io_ops, |
| d, "kvaser_pci-sja", KVASER_PCI_SJA_RANGE); |
| memory_region_init_io(&d->xilinx_io, OBJECT(d), &kvaser_pci_xilinx_io_ops, |
| d, "kvaser_pci-xilinx", KVASER_PCI_XILINX_RANGE); |
| |
| pci_register_bar(&d->dev, /*BAR*/ 0, PCI_BASE_ADDRESS_SPACE_IO, |
| &d->s5920_io); |
| pci_register_bar(&d->dev, /*BAR*/ 1, PCI_BASE_ADDRESS_SPACE_IO, |
| &d->sja_io); |
| pci_register_bar(&d->dev, /*BAR*/ 2, PCI_BASE_ADDRESS_SPACE_IO, |
| &d->xilinx_io); |
| } |
| |
| static void kvaser_pci_exit(PCIDevice *pci_dev) |
| { |
| KvaserPCIState *d = KVASER_PCI_DEV(pci_dev); |
| CanSJA1000State *s = &d->sja_state; |
| |
| can_sja_disconnect(s); |
| |
| qemu_free_irq(d->irq); |
| } |
| |
| static const VMStateDescription vmstate_kvaser_pci = { |
| .name = "kvaser_pci", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_PCI_DEVICE(dev, KvaserPCIState), |
| /* Load this before sja_state. */ |
| VMSTATE_UINT32(s5920_intcsr, KvaserPCIState), |
| VMSTATE_STRUCT(sja_state, KvaserPCIState, 0, vmstate_can_sja, |
| CanSJA1000State), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void kvaser_pci_instance_init(Object *obj) |
| { |
| KvaserPCIState *d = KVASER_PCI_DEV(obj); |
| |
| object_property_add_link(obj, "canbus", TYPE_CAN_BUS, |
| (Object **)&d->canbus, |
| qdev_prop_allow_set_link_before_realize, |
| 0); |
| } |
| |
| static void kvaser_pci_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->realize = kvaser_pci_realize; |
| k->exit = kvaser_pci_exit; |
| k->vendor_id = KVASER_PCI_VENDOR_ID1; |
| k->device_id = KVASER_PCI_DEVICE_ID1; |
| k->revision = 0x00; |
| k->class_id = 0x00ff00; |
| dc->desc = "Kvaser PCICANx"; |
| dc->vmsd = &vmstate_kvaser_pci; |
| device_class_set_legacy_reset(dc, kvaser_pci_reset); |
| set_bit(DEVICE_CATEGORY_MISC, dc->categories); |
| } |
| |
| static const TypeInfo kvaser_pci_info = { |
| .name = TYPE_CAN_PCI_DEV, |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(KvaserPCIState), |
| .class_init = kvaser_pci_class_init, |
| .instance_init = kvaser_pci_instance_init, |
| .interfaces = (InterfaceInfo[]) { |
| { INTERFACE_CONVENTIONAL_PCI_DEVICE }, |
| { }, |
| }, |
| }; |
| |
| static void kvaser_pci_register_types(void) |
| { |
| type_register_static(&kvaser_pci_info); |
| } |
| |
| type_init(kvaser_pci_register_types) |