| /* |
| * Xilinx Zynq Baseboard System emulation. |
| * |
| * Copyright (c) 2010 Xilinx. |
| * Copyright (c) 2012 Peter A.G. Crosthwaite (peter.croshtwaite@petalogix.com) |
| * Copyright (c) 2012 Petalogix Pty Ltd. |
| * Written by Haibing Ma |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "sysbus.h" |
| #include "arm-misc.h" |
| #include "net/net.h" |
| #include "exec/address-spaces.h" |
| #include "sysemu/sysemu.h" |
| #include "boards.h" |
| #include "flash.h" |
| #include "sysemu/blockdev.h" |
| #include "loader.h" |
| #include "ssi.h" |
| |
| #define NUM_SPI_FLASHES 4 |
| #define NUM_QSPI_FLASHES 2 |
| #define NUM_QSPI_BUSSES 2 |
| |
| #define FLASH_SIZE (64 * 1024 * 1024) |
| #define FLASH_SECTOR_SIZE (128 * 1024) |
| |
| #define IRQ_OFFSET 32 /* pic interrupts start from index 32 */ |
| |
| static struct arm_boot_info zynq_binfo = {}; |
| |
| static void gem_init(NICInfo *nd, uint32_t base, qemu_irq irq) |
| { |
| DeviceState *dev; |
| SysBusDevice *s; |
| |
| qemu_check_nic_model(nd, "cadence_gem"); |
| dev = qdev_create(NULL, "cadence_gem"); |
| qdev_set_nic_properties(dev, nd); |
| qdev_init_nofail(dev); |
| s = SYS_BUS_DEVICE(dev); |
| sysbus_mmio_map(s, 0, base); |
| sysbus_connect_irq(s, 0, irq); |
| } |
| |
| static inline void zynq_init_spi_flashes(uint32_t base_addr, qemu_irq irq, |
| bool is_qspi) |
| { |
| DeviceState *dev; |
| SysBusDevice *busdev; |
| SSIBus *spi; |
| DeviceState *flash_dev; |
| int i, j; |
| int num_busses = is_qspi ? NUM_QSPI_BUSSES : 1; |
| int num_ss = is_qspi ? NUM_QSPI_FLASHES : NUM_SPI_FLASHES; |
| |
| dev = qdev_create(NULL, "xilinx,spips"); |
| qdev_prop_set_uint8(dev, "num-txrx-bytes", is_qspi ? 4 : 1); |
| qdev_prop_set_uint8(dev, "num-ss-bits", num_ss); |
| qdev_prop_set_uint8(dev, "num-busses", num_busses); |
| qdev_init_nofail(dev); |
| busdev = SYS_BUS_DEVICE(dev); |
| sysbus_mmio_map(busdev, 0, base_addr); |
| if (is_qspi) { |
| sysbus_mmio_map(busdev, 1, 0xFC000000); |
| } |
| sysbus_connect_irq(busdev, 0, irq); |
| |
| for (i = 0; i < num_busses; ++i) { |
| char bus_name[16]; |
| qemu_irq cs_line; |
| |
| snprintf(bus_name, 16, "spi%d", i); |
| spi = (SSIBus *)qdev_get_child_bus(dev, bus_name); |
| |
| for (j = 0; j < num_ss; ++j) { |
| flash_dev = ssi_create_slave_no_init(spi, "m25p80"); |
| qdev_prop_set_string(flash_dev, "partname", "n25q128"); |
| qdev_init_nofail(flash_dev); |
| |
| cs_line = qdev_get_gpio_in(flash_dev, 0); |
| sysbus_connect_irq(busdev, i * num_ss + j + 1, cs_line); |
| } |
| } |
| |
| } |
| |
| static void zynq_init(QEMUMachineInitArgs *args) |
| { |
| ram_addr_t ram_size = args->ram_size; |
| const char *cpu_model = args->cpu_model; |
| const char *kernel_filename = args->kernel_filename; |
| const char *kernel_cmdline = args->kernel_cmdline; |
| const char *initrd_filename = args->initrd_filename; |
| ARMCPU *cpu; |
| MemoryRegion *address_space_mem = get_system_memory(); |
| MemoryRegion *ext_ram = g_new(MemoryRegion, 1); |
| MemoryRegion *ocm_ram = g_new(MemoryRegion, 1); |
| DeviceState *dev; |
| SysBusDevice *busdev; |
| qemu_irq *irqp; |
| qemu_irq pic[64]; |
| NICInfo *nd; |
| int n; |
| qemu_irq cpu_irq; |
| |
| if (!cpu_model) { |
| cpu_model = "cortex-a9"; |
| } |
| |
| cpu = cpu_arm_init(cpu_model); |
| if (!cpu) { |
| fprintf(stderr, "Unable to find CPU definition\n"); |
| exit(1); |
| } |
| irqp = arm_pic_init_cpu(cpu); |
| cpu_irq = irqp[ARM_PIC_CPU_IRQ]; |
| |
| /* max 2GB ram */ |
| if (ram_size > 0x80000000) { |
| ram_size = 0x80000000; |
| } |
| |
| /* DDR remapped to address zero. */ |
| memory_region_init_ram(ext_ram, "zynq.ext_ram", ram_size); |
| vmstate_register_ram_global(ext_ram); |
| memory_region_add_subregion(address_space_mem, 0, ext_ram); |
| |
| /* 256K of on-chip memory */ |
| memory_region_init_ram(ocm_ram, "zynq.ocm_ram", 256 << 10); |
| vmstate_register_ram_global(ocm_ram); |
| memory_region_add_subregion(address_space_mem, 0xFFFC0000, ocm_ram); |
| |
| DriveInfo *dinfo = drive_get(IF_PFLASH, 0, 0); |
| |
| /* AMD */ |
| pflash_cfi02_register(0xe2000000, NULL, "zynq.pflash", FLASH_SIZE, |
| dinfo ? dinfo->bdrv : NULL, FLASH_SECTOR_SIZE, |
| FLASH_SIZE/FLASH_SECTOR_SIZE, 1, |
| 1, 0x0066, 0x0022, 0x0000, 0x0000, 0x0555, 0x2aa, |
| 0); |
| |
| dev = qdev_create(NULL, "xilinx,zynq_slcr"); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8000000); |
| |
| dev = qdev_create(NULL, "a9mpcore_priv"); |
| qdev_prop_set_uint32(dev, "num-cpu", 1); |
| qdev_init_nofail(dev); |
| busdev = SYS_BUS_DEVICE(dev); |
| sysbus_mmio_map(busdev, 0, 0xF8F00000); |
| sysbus_connect_irq(busdev, 0, cpu_irq); |
| |
| for (n = 0; n < 64; n++) { |
| pic[n] = qdev_get_gpio_in(dev, n); |
| } |
| |
| zynq_init_spi_flashes(0xE0006000, pic[58-IRQ_OFFSET], false); |
| zynq_init_spi_flashes(0xE0007000, pic[81-IRQ_OFFSET], false); |
| zynq_init_spi_flashes(0xE000D000, pic[51-IRQ_OFFSET], true); |
| |
| sysbus_create_simple("xlnx,ps7-usb", 0xE0002000, pic[53-IRQ_OFFSET]); |
| sysbus_create_simple("xlnx,ps7-usb", 0xE0003000, pic[75-IRQ_OFFSET]); |
| |
| sysbus_create_simple("cadence_uart", 0xE0000000, pic[59-IRQ_OFFSET]); |
| sysbus_create_simple("cadence_uart", 0xE0001000, pic[82-IRQ_OFFSET]); |
| |
| sysbus_create_varargs("cadence_ttc", 0xF8001000, |
| pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL); |
| sysbus_create_varargs("cadence_ttc", 0xF8002000, |
| pic[69-IRQ_OFFSET], pic[70-IRQ_OFFSET], pic[71-IRQ_OFFSET], NULL); |
| |
| for (n = 0; n < nb_nics; n++) { |
| nd = &nd_table[n]; |
| if (n == 0) { |
| gem_init(nd, 0xE000B000, pic[54-IRQ_OFFSET]); |
| } else if (n == 1) { |
| gem_init(nd, 0xE000C000, pic[77-IRQ_OFFSET]); |
| } |
| } |
| |
| zynq_binfo.ram_size = ram_size; |
| zynq_binfo.kernel_filename = kernel_filename; |
| zynq_binfo.kernel_cmdline = kernel_cmdline; |
| zynq_binfo.initrd_filename = initrd_filename; |
| zynq_binfo.nb_cpus = 1; |
| zynq_binfo.board_id = 0xd32; |
| zynq_binfo.loader_start = 0; |
| arm_load_kernel(arm_env_get_cpu(first_cpu), &zynq_binfo); |
| } |
| |
| static QEMUMachine zynq_machine = { |
| .name = "xilinx-zynq-a9", |
| .desc = "Xilinx Zynq Platform Baseboard for Cortex-A9", |
| .init = zynq_init, |
| .block_default_type = IF_SCSI, |
| .max_cpus = 1, |
| .no_sdcard = 1, |
| DEFAULT_MACHINE_OPTIONS, |
| }; |
| |
| static void zynq_machine_init(void) |
| { |
| qemu_register_machine(&zynq_machine); |
| } |
| |
| machine_init(zynq_machine_init); |